Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates...

61
Chemical Products Catalogue

Transcript of Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates...

Page 1: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Chemical Products Catalogue

Acids 7

Gases 25

Organic products 43

Resins and polymers 63

Other products 101

OSTCHEM was established in 2010 as a company that operates Group DF nitrogen business enterprises

The same year OSTCHEM purchased a controlling interest of two large-scale Ukrainian manufacturers of nitrogen fertilizers PJSC ldquoCONCERN STIROLrdquo (Horlivka Donetsk region) and PJSC ldquoAZOTrdquo (Cherkasy)

In 2011 OSTCHEM group acquired PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo (Severodonetsk Lugansk region) and PJSC ldquoRIVNEAZOTrdquo (Rivne)

One year later the acquisition of ldquoSpecialized Seaport Nika-Tera Ltdrdquo in Nikolaev and PrJSC ldquoUkrAgro NPKrdquo which is responsible for the distribution of products through its own Ukraine wide network strengthened OSTCHEM positioning

PrJSC ldquoUkrAgro NPKrdquo has more than 25 ware-houses for mineral fertilizers storage This net-work of warehouses is the largest in Ukraine

In 2014 Estonian nitrogen fertilizer producer AS ldquoNITROFERTrdquo joined OSTСHEM

OSTCHEM formation

2010 2010 2011 2011 2012 20142012

3

OSTCHEM production capacity (nitrogen fertilizers thousand tonnes per year)

OSTCHEM production capacity (organic chemistry and other products thousand tonnes per year)

PlantLiquid ammonia

technicalUrea

Ammonium nitrate

CAN UANAmmonium

sulphateAqueous ammonia

technical

1 470 940 693 ― 670 ― ―

964 760 1000 ― 500 153 252

1020 390 550 ― ― ― 60

420 ― 540 450 ― ― 470

180 220 ― ― ― ― 30

4 054 2 310 2 783 450 1 170 153 812

Plant Adipic acid Acetic acid Methanol Caprolactam Polystyrene Vinyl acetateLiquid carbon

dioxide

― ― ― ― 58 ― 64

― ― ― 60 ― ― 24

30 150 190 ― ― 40 5

25 ― ― ― ― ― 6

― ― ― ― ― ― ―

55 150 190 60 58 40 99

5

Acids

Dicarboxylic acids C4-C6Normative document ТU U 241-33270581-0032011

Chemical formula НООС-(СН)n-СООН where n = 2divide4

Application

Dicarboxylic acids C4-C6 are used in production of plasticisers polyurethane glues synthetic lubricants painting materials and as fluidizing agent for concrete

Storage and transportation

Dicarboxylic acids C4-C6 are packed in 4-layer paper bag NM grade with PE liner PP bags with PE liner other packaging agreed with the customer Bags and liners are sewed up together to eliminate spillage of the product

Dicarboxylic acids C4-C6 are transported by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Dicarboxylic acids C4-C6 to be stored packed in dry covered warehouses

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

AppearanceFreeform flakes or powder of light beige color

Freeform flakes or powder of light beige ndash light brown color

Freeform flakes or powder of green ndash gray color

Acid number mg KOHg 700ndash900 700ndash900 700ndash900

Vanadium max 00005 0005 10

Copper max 00015 0015 25

Iron max 00015 - -

Moisture max 2 - -

Lower dicarboxylic acids

Adipic acid

Amber acid

Glutaric acid

20ndash30

15ndash25

50ndash60

-

-

-

-

-

-

Color of sol mgdm3 Pt (Hazen units) max 300 - -

Acids 9

Adipic acid Normative document GOST 10558-80

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers in printing industry for high quality paper production in pharmaceutical industry Adipic acid is produced to satisfy the needs of national economy and export

Storage and transportation

Adipic acid is packed in 4-layer non-impregnated paper bags with PE liners or open laminated bags with one layer of paper laminated with PE and five layers of non-impregnated paper Bags and liners are sewed up (PE bags are sealed) together to eliminate spillage of the product

Adipic acid is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Premium quality First quality

Appearance White crystalline substance

Adipic acid min 997 997

Color of solution PtCo scale (Hazen units) max 5 20

Color of melt PtCo scale (Hazen units) max 50 Not rated

Melting point degС min 1515 1510

Water max 027 030

Ash max 0003 0005

Nitric acid max 00010 0008

Iron max 00001 00003

Oxidizers as oxalic acid max 0006 0007

Acids 11

Adipic acid improved Normative document ТU U 241-33270581-0262008

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid improved is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers plastics diesters and colouring agents in printing industry for high quality paper production in pharmaceutical industry and as preserving agent in food industry Adipic acid improved is designed to satisfy the needs of national economy and export

Storage and transportation

Adipic acid improved is packed in 4-layer non-impregnated paper bags with PE liners or standard laminated soft containers made from polymeric materials (big-bags)

Adipic acid improved is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid improved to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance White crystalline substance

Adipic acid min 998

Color of solution PtCo scale (Hazen units) max 25

Color of melt PtCo scale (Hazen units) max 35

Melting point degС min 1520

Water max 018

Ash max 00015

Nitric acid max 00003

Iron max 000005

Oxidizers as oxalic acid max 0004

Acids 13

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 2: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Acids 7

Gases 25

Organic products 43

Resins and polymers 63

Other products 101

OSTCHEM was established in 2010 as a company that operates Group DF nitrogen business enterprises

The same year OSTCHEM purchased a controlling interest of two large-scale Ukrainian manufacturers of nitrogen fertilizers PJSC ldquoCONCERN STIROLrdquo (Horlivka Donetsk region) and PJSC ldquoAZOTrdquo (Cherkasy)

In 2011 OSTCHEM group acquired PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo (Severodonetsk Lugansk region) and PJSC ldquoRIVNEAZOTrdquo (Rivne)

One year later the acquisition of ldquoSpecialized Seaport Nika-Tera Ltdrdquo in Nikolaev and PrJSC ldquoUkrAgro NPKrdquo which is responsible for the distribution of products through its own Ukraine wide network strengthened OSTCHEM positioning

PrJSC ldquoUkrAgro NPKrdquo has more than 25 ware-houses for mineral fertilizers storage This net-work of warehouses is the largest in Ukraine

In 2014 Estonian nitrogen fertilizer producer AS ldquoNITROFERTrdquo joined OSTСHEM

OSTCHEM formation

2010 2010 2011 2011 2012 20142012

3

OSTCHEM production capacity (nitrogen fertilizers thousand tonnes per year)

OSTCHEM production capacity (organic chemistry and other products thousand tonnes per year)

PlantLiquid ammonia

technicalUrea

Ammonium nitrate

CAN UANAmmonium

sulphateAqueous ammonia

technical

1 470 940 693 ― 670 ― ―

964 760 1000 ― 500 153 252

1020 390 550 ― ― ― 60

420 ― 540 450 ― ― 470

180 220 ― ― ― ― 30

4 054 2 310 2 783 450 1 170 153 812

Plant Adipic acid Acetic acid Methanol Caprolactam Polystyrene Vinyl acetateLiquid carbon

dioxide

― ― ― ― 58 ― 64

― ― ― 60 ― ― 24

30 150 190 ― ― 40 5

25 ― ― ― ― ― 6

― ― ― ― ― ― ―

55 150 190 60 58 40 99

5

Acids

Dicarboxylic acids C4-C6Normative document ТU U 241-33270581-0032011

Chemical formula НООС-(СН)n-СООН where n = 2divide4

Application

Dicarboxylic acids C4-C6 are used in production of plasticisers polyurethane glues synthetic lubricants painting materials and as fluidizing agent for concrete

Storage and transportation

Dicarboxylic acids C4-C6 are packed in 4-layer paper bag NM grade with PE liner PP bags with PE liner other packaging agreed with the customer Bags and liners are sewed up together to eliminate spillage of the product

Dicarboxylic acids C4-C6 are transported by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Dicarboxylic acids C4-C6 to be stored packed in dry covered warehouses

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

AppearanceFreeform flakes or powder of light beige color

Freeform flakes or powder of light beige ndash light brown color

Freeform flakes or powder of green ndash gray color

Acid number mg KOHg 700ndash900 700ndash900 700ndash900

Vanadium max 00005 0005 10

Copper max 00015 0015 25

Iron max 00015 - -

Moisture max 2 - -

Lower dicarboxylic acids

Adipic acid

Amber acid

Glutaric acid

20ndash30

15ndash25

50ndash60

-

-

-

-

-

-

Color of sol mgdm3 Pt (Hazen units) max 300 - -

Acids 9

Adipic acid Normative document GOST 10558-80

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers in printing industry for high quality paper production in pharmaceutical industry Adipic acid is produced to satisfy the needs of national economy and export

Storage and transportation

Adipic acid is packed in 4-layer non-impregnated paper bags with PE liners or open laminated bags with one layer of paper laminated with PE and five layers of non-impregnated paper Bags and liners are sewed up (PE bags are sealed) together to eliminate spillage of the product

Adipic acid is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Premium quality First quality

Appearance White crystalline substance

Adipic acid min 997 997

Color of solution PtCo scale (Hazen units) max 5 20

Color of melt PtCo scale (Hazen units) max 50 Not rated

Melting point degС min 1515 1510

Water max 027 030

Ash max 0003 0005

Nitric acid max 00010 0008

Iron max 00001 00003

Oxidizers as oxalic acid max 0006 0007

Acids 11

Adipic acid improved Normative document ТU U 241-33270581-0262008

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid improved is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers plastics diesters and colouring agents in printing industry for high quality paper production in pharmaceutical industry and as preserving agent in food industry Adipic acid improved is designed to satisfy the needs of national economy and export

Storage and transportation

Adipic acid improved is packed in 4-layer non-impregnated paper bags with PE liners or standard laminated soft containers made from polymeric materials (big-bags)

Adipic acid improved is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid improved to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance White crystalline substance

Adipic acid min 998

Color of solution PtCo scale (Hazen units) max 25

Color of melt PtCo scale (Hazen units) max 35

Melting point degС min 1520

Water max 018

Ash max 00015

Nitric acid max 00003

Iron max 000005

Oxidizers as oxalic acid max 0004

Acids 13

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 3: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

OSTCHEM was established in 2010 as a company that operates Group DF nitrogen business enterprises

The same year OSTCHEM purchased a controlling interest of two large-scale Ukrainian manufacturers of nitrogen fertilizers PJSC ldquoCONCERN STIROLrdquo (Horlivka Donetsk region) and PJSC ldquoAZOTrdquo (Cherkasy)

In 2011 OSTCHEM group acquired PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo (Severodonetsk Lugansk region) and PJSC ldquoRIVNEAZOTrdquo (Rivne)

One year later the acquisition of ldquoSpecialized Seaport Nika-Tera Ltdrdquo in Nikolaev and PrJSC ldquoUkrAgro NPKrdquo which is responsible for the distribution of products through its own Ukraine wide network strengthened OSTCHEM positioning

PrJSC ldquoUkrAgro NPKrdquo has more than 25 ware-houses for mineral fertilizers storage This net-work of warehouses is the largest in Ukraine

In 2014 Estonian nitrogen fertilizer producer AS ldquoNITROFERTrdquo joined OSTСHEM

OSTCHEM formation

2010 2010 2011 2011 2012 20142012

3

OSTCHEM production capacity (nitrogen fertilizers thousand tonnes per year)

OSTCHEM production capacity (organic chemistry and other products thousand tonnes per year)

PlantLiquid ammonia

technicalUrea

Ammonium nitrate

CAN UANAmmonium

sulphateAqueous ammonia

technical

1 470 940 693 ― 670 ― ―

964 760 1000 ― 500 153 252

1020 390 550 ― ― ― 60

420 ― 540 450 ― ― 470

180 220 ― ― ― ― 30

4 054 2 310 2 783 450 1 170 153 812

Plant Adipic acid Acetic acid Methanol Caprolactam Polystyrene Vinyl acetateLiquid carbon

dioxide

― ― ― ― 58 ― 64

― ― ― 60 ― ― 24

30 150 190 ― ― 40 5

25 ― ― ― ― ― 6

― ― ― ― ― ― ―

55 150 190 60 58 40 99

5

Acids

Dicarboxylic acids C4-C6Normative document ТU U 241-33270581-0032011

Chemical formula НООС-(СН)n-СООН where n = 2divide4

Application

Dicarboxylic acids C4-C6 are used in production of plasticisers polyurethane glues synthetic lubricants painting materials and as fluidizing agent for concrete

Storage and transportation

Dicarboxylic acids C4-C6 are packed in 4-layer paper bag NM grade with PE liner PP bags with PE liner other packaging agreed with the customer Bags and liners are sewed up together to eliminate spillage of the product

Dicarboxylic acids C4-C6 are transported by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Dicarboxylic acids C4-C6 to be stored packed in dry covered warehouses

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

AppearanceFreeform flakes or powder of light beige color

Freeform flakes or powder of light beige ndash light brown color

Freeform flakes or powder of green ndash gray color

Acid number mg KOHg 700ndash900 700ndash900 700ndash900

Vanadium max 00005 0005 10

Copper max 00015 0015 25

Iron max 00015 - -

Moisture max 2 - -

Lower dicarboxylic acids

Adipic acid

Amber acid

Glutaric acid

20ndash30

15ndash25

50ndash60

-

-

-

-

-

-

Color of sol mgdm3 Pt (Hazen units) max 300 - -

Acids 9

Adipic acid Normative document GOST 10558-80

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers in printing industry for high quality paper production in pharmaceutical industry Adipic acid is produced to satisfy the needs of national economy and export

Storage and transportation

Adipic acid is packed in 4-layer non-impregnated paper bags with PE liners or open laminated bags with one layer of paper laminated with PE and five layers of non-impregnated paper Bags and liners are sewed up (PE bags are sealed) together to eliminate spillage of the product

Adipic acid is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Premium quality First quality

Appearance White crystalline substance

Adipic acid min 997 997

Color of solution PtCo scale (Hazen units) max 5 20

Color of melt PtCo scale (Hazen units) max 50 Not rated

Melting point degС min 1515 1510

Water max 027 030

Ash max 0003 0005

Nitric acid max 00010 0008

Iron max 00001 00003

Oxidizers as oxalic acid max 0006 0007

Acids 11

Adipic acid improved Normative document ТU U 241-33270581-0262008

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid improved is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers plastics diesters and colouring agents in printing industry for high quality paper production in pharmaceutical industry and as preserving agent in food industry Adipic acid improved is designed to satisfy the needs of national economy and export

Storage and transportation

Adipic acid improved is packed in 4-layer non-impregnated paper bags with PE liners or standard laminated soft containers made from polymeric materials (big-bags)

Adipic acid improved is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid improved to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance White crystalline substance

Adipic acid min 998

Color of solution PtCo scale (Hazen units) max 25

Color of melt PtCo scale (Hazen units) max 35

Melting point degС min 1520

Water max 018

Ash max 00015

Nitric acid max 00003

Iron max 000005

Oxidizers as oxalic acid max 0004

Acids 13

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 4: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

OSTCHEM production capacity (nitrogen fertilizers thousand tonnes per year)

OSTCHEM production capacity (organic chemistry and other products thousand tonnes per year)

PlantLiquid ammonia

technicalUrea

Ammonium nitrate

CAN UANAmmonium

sulphateAqueous ammonia

technical

1 470 940 693 ― 670 ― ―

964 760 1000 ― 500 153 252

1020 390 550 ― ― ― 60

420 ― 540 450 ― ― 470

180 220 ― ― ― ― 30

4 054 2 310 2 783 450 1 170 153 812

Plant Adipic acid Acetic acid Methanol Caprolactam Polystyrene Vinyl acetateLiquid carbon

dioxide

― ― ― ― 58 ― 64

― ― ― 60 ― ― 24

30 150 190 ― ― 40 5

25 ― ― ― ― ― 6

― ― ― ― ― ― ―

55 150 190 60 58 40 99

5

Acids

Dicarboxylic acids C4-C6Normative document ТU U 241-33270581-0032011

Chemical formula НООС-(СН)n-СООН where n = 2divide4

Application

Dicarboxylic acids C4-C6 are used in production of plasticisers polyurethane glues synthetic lubricants painting materials and as fluidizing agent for concrete

Storage and transportation

Dicarboxylic acids C4-C6 are packed in 4-layer paper bag NM grade with PE liner PP bags with PE liner other packaging agreed with the customer Bags and liners are sewed up together to eliminate spillage of the product

Dicarboxylic acids C4-C6 are transported by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Dicarboxylic acids C4-C6 to be stored packed in dry covered warehouses

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

AppearanceFreeform flakes or powder of light beige color

Freeform flakes or powder of light beige ndash light brown color

Freeform flakes or powder of green ndash gray color

Acid number mg KOHg 700ndash900 700ndash900 700ndash900

Vanadium max 00005 0005 10

Copper max 00015 0015 25

Iron max 00015 - -

Moisture max 2 - -

Lower dicarboxylic acids

Adipic acid

Amber acid

Glutaric acid

20ndash30

15ndash25

50ndash60

-

-

-

-

-

-

Color of sol mgdm3 Pt (Hazen units) max 300 - -

Acids 9

Adipic acid Normative document GOST 10558-80

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers in printing industry for high quality paper production in pharmaceutical industry Adipic acid is produced to satisfy the needs of national economy and export

Storage and transportation

Adipic acid is packed in 4-layer non-impregnated paper bags with PE liners or open laminated bags with one layer of paper laminated with PE and five layers of non-impregnated paper Bags and liners are sewed up (PE bags are sealed) together to eliminate spillage of the product

Adipic acid is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Premium quality First quality

Appearance White crystalline substance

Adipic acid min 997 997

Color of solution PtCo scale (Hazen units) max 5 20

Color of melt PtCo scale (Hazen units) max 50 Not rated

Melting point degС min 1515 1510

Water max 027 030

Ash max 0003 0005

Nitric acid max 00010 0008

Iron max 00001 00003

Oxidizers as oxalic acid max 0006 0007

Acids 11

Adipic acid improved Normative document ТU U 241-33270581-0262008

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid improved is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers plastics diesters and colouring agents in printing industry for high quality paper production in pharmaceutical industry and as preserving agent in food industry Adipic acid improved is designed to satisfy the needs of national economy and export

Storage and transportation

Adipic acid improved is packed in 4-layer non-impregnated paper bags with PE liners or standard laminated soft containers made from polymeric materials (big-bags)

Adipic acid improved is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid improved to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance White crystalline substance

Adipic acid min 998

Color of solution PtCo scale (Hazen units) max 25

Color of melt PtCo scale (Hazen units) max 35

Melting point degС min 1520

Water max 018

Ash max 00015

Nitric acid max 00003

Iron max 000005

Oxidizers as oxalic acid max 0004

Acids 13

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 5: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Acids

Dicarboxylic acids C4-C6Normative document ТU U 241-33270581-0032011

Chemical formula НООС-(СН)n-СООН where n = 2divide4

Application

Dicarboxylic acids C4-C6 are used in production of plasticisers polyurethane glues synthetic lubricants painting materials and as fluidizing agent for concrete

Storage and transportation

Dicarboxylic acids C4-C6 are packed in 4-layer paper bag NM grade with PE liner PP bags with PE liner other packaging agreed with the customer Bags and liners are sewed up together to eliminate spillage of the product

Dicarboxylic acids C4-C6 are transported by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Dicarboxylic acids C4-C6 to be stored packed in dry covered warehouses

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

AppearanceFreeform flakes or powder of light beige color

Freeform flakes or powder of light beige ndash light brown color

Freeform flakes or powder of green ndash gray color

Acid number mg KOHg 700ndash900 700ndash900 700ndash900

Vanadium max 00005 0005 10

Copper max 00015 0015 25

Iron max 00015 - -

Moisture max 2 - -

Lower dicarboxylic acids

Adipic acid

Amber acid

Glutaric acid

20ndash30

15ndash25

50ndash60

-

-

-

-

-

-

Color of sol mgdm3 Pt (Hazen units) max 300 - -

Acids 9

Adipic acid Normative document GOST 10558-80

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers in printing industry for high quality paper production in pharmaceutical industry Adipic acid is produced to satisfy the needs of national economy and export

Storage and transportation

Adipic acid is packed in 4-layer non-impregnated paper bags with PE liners or open laminated bags with one layer of paper laminated with PE and five layers of non-impregnated paper Bags and liners are sewed up (PE bags are sealed) together to eliminate spillage of the product

Adipic acid is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Premium quality First quality

Appearance White crystalline substance

Adipic acid min 997 997

Color of solution PtCo scale (Hazen units) max 5 20

Color of melt PtCo scale (Hazen units) max 50 Not rated

Melting point degС min 1515 1510

Water max 027 030

Ash max 0003 0005

Nitric acid max 00010 0008

Iron max 00001 00003

Oxidizers as oxalic acid max 0006 0007

Acids 11

Adipic acid improved Normative document ТU U 241-33270581-0262008

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid improved is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers plastics diesters and colouring agents in printing industry for high quality paper production in pharmaceutical industry and as preserving agent in food industry Adipic acid improved is designed to satisfy the needs of national economy and export

Storage and transportation

Adipic acid improved is packed in 4-layer non-impregnated paper bags with PE liners or standard laminated soft containers made from polymeric materials (big-bags)

Adipic acid improved is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid improved to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance White crystalline substance

Adipic acid min 998

Color of solution PtCo scale (Hazen units) max 25

Color of melt PtCo scale (Hazen units) max 35

Melting point degС min 1520

Water max 018

Ash max 00015

Nitric acid max 00003

Iron max 000005

Oxidizers as oxalic acid max 0004

Acids 13

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 6: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Dicarboxylic acids C4-C6Normative document ТU U 241-33270581-0032011

Chemical formula НООС-(СН)n-СООН where n = 2divide4

Application

Dicarboxylic acids C4-C6 are used in production of plasticisers polyurethane glues synthetic lubricants painting materials and as fluidizing agent for concrete

Storage and transportation

Dicarboxylic acids C4-C6 are packed in 4-layer paper bag NM grade with PE liner PP bags with PE liner other packaging agreed with the customer Bags and liners are sewed up together to eliminate spillage of the product

Dicarboxylic acids C4-C6 are transported by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Dicarboxylic acids C4-C6 to be stored packed in dry covered warehouses

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

AppearanceFreeform flakes or powder of light beige color

Freeform flakes or powder of light beige ndash light brown color

Freeform flakes or powder of green ndash gray color

Acid number mg KOHg 700ndash900 700ndash900 700ndash900

Vanadium max 00005 0005 10

Copper max 00015 0015 25

Iron max 00015 - -

Moisture max 2 - -

Lower dicarboxylic acids

Adipic acid

Amber acid

Glutaric acid

20ndash30

15ndash25

50ndash60

-

-

-

-

-

-

Color of sol mgdm3 Pt (Hazen units) max 300 - -

Acids 9

Adipic acid Normative document GOST 10558-80

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers in printing industry for high quality paper production in pharmaceutical industry Adipic acid is produced to satisfy the needs of national economy and export

Storage and transportation

Adipic acid is packed in 4-layer non-impregnated paper bags with PE liners or open laminated bags with one layer of paper laminated with PE and five layers of non-impregnated paper Bags and liners are sewed up (PE bags are sealed) together to eliminate spillage of the product

Adipic acid is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Premium quality First quality

Appearance White crystalline substance

Adipic acid min 997 997

Color of solution PtCo scale (Hazen units) max 5 20

Color of melt PtCo scale (Hazen units) max 50 Not rated

Melting point degС min 1515 1510

Water max 027 030

Ash max 0003 0005

Nitric acid max 00010 0008

Iron max 00001 00003

Oxidizers as oxalic acid max 0006 0007

Acids 11

Adipic acid improved Normative document ТU U 241-33270581-0262008

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid improved is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers plastics diesters and colouring agents in printing industry for high quality paper production in pharmaceutical industry and as preserving agent in food industry Adipic acid improved is designed to satisfy the needs of national economy and export

Storage and transportation

Adipic acid improved is packed in 4-layer non-impregnated paper bags with PE liners or standard laminated soft containers made from polymeric materials (big-bags)

Adipic acid improved is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid improved to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance White crystalline substance

Adipic acid min 998

Color of solution PtCo scale (Hazen units) max 25

Color of melt PtCo scale (Hazen units) max 35

Melting point degС min 1520

Water max 018

Ash max 00015

Nitric acid max 00003

Iron max 000005

Oxidizers as oxalic acid max 0004

Acids 13

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 7: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Adipic acid Normative document GOST 10558-80

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers in printing industry for high quality paper production in pharmaceutical industry Adipic acid is produced to satisfy the needs of national economy and export

Storage and transportation

Adipic acid is packed in 4-layer non-impregnated paper bags with PE liners or open laminated bags with one layer of paper laminated with PE and five layers of non-impregnated paper Bags and liners are sewed up (PE bags are sealed) together to eliminate spillage of the product

Adipic acid is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Premium quality First quality

Appearance White crystalline substance

Adipic acid min 997 997

Color of solution PtCo scale (Hazen units) max 5 20

Color of melt PtCo scale (Hazen units) max 50 Not rated

Melting point degС min 1515 1510

Water max 027 030

Ash max 0003 0005

Nitric acid max 00010 0008

Iron max 00001 00003

Oxidizers as oxalic acid max 0006 0007

Acids 11

Adipic acid improved Normative document ТU U 241-33270581-0262008

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid improved is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers plastics diesters and colouring agents in printing industry for high quality paper production in pharmaceutical industry and as preserving agent in food industry Adipic acid improved is designed to satisfy the needs of national economy and export

Storage and transportation

Adipic acid improved is packed in 4-layer non-impregnated paper bags with PE liners or standard laminated soft containers made from polymeric materials (big-bags)

Adipic acid improved is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid improved to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance White crystalline substance

Adipic acid min 998

Color of solution PtCo scale (Hazen units) max 25

Color of melt PtCo scale (Hazen units) max 35

Melting point degС min 1520

Water max 018

Ash max 00015

Nitric acid max 00003

Iron max 000005

Oxidizers as oxalic acid max 0004

Acids 13

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 8: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Adipic acid improved Normative document ТU U 241-33270581-0262008

Chemical formula НООС-(СН2)4-СООН

Application

Adipic acid improved is used in production of nylon salt (hexamethylene diamine adipate) hexamethylene diamine sebacate polyurethane plasticizers plastics diesters and colouring agents in printing industry for high quality paper production in pharmaceutical industry and as preserving agent in food industry Adipic acid improved is designed to satisfy the needs of national economy and export

Storage and transportation

Adipic acid improved is packed in 4-layer non-impregnated paper bags with PE liners or standard laminated soft containers made from polymeric materials (big-bags)

Adipic acid improved is transported packed by wagonload in covered rw wagons covered decked vessels and covered motor transport according to cargo carriage regulations applicable to a particular transportation mode

Packed adipic acid improved to be stored in dry covered warehouses at 50 degС max

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance White crystalline substance

Adipic acid min 998

Color of solution PtCo scale (Hazen units) max 25

Color of melt PtCo scale (Hazen units) max 35

Melting point degС min 1520

Water max 018

Ash max 00015

Nitric acid max 00003

Iron max 000005

Oxidizers as oxalic acid max 0004

Acids 13

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 9: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Non concentrated (weak) nitric acidNormative document TU U 00203826021-2000

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used to produce ammonium nitrate complex fertilizers for oxidizing processes in pickling of metals etc

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is to be stored in containers of stainless steel barrels or carboys in covered warehouses Storage temperature ndash from minus 30 degС to plus 40 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

AppearanceColourless or yellowish liquid without mechanical impurities

Nitric acid min 570 560

Nitrogen oxide (in terms of N2O4) max 007 01

Residue after vaporization max 0004 002

Normative document TU U 241-33270581-0052011

Chemical formula HNO3

Application

Non concentrated (weak) nitric acid is used for production of ammonia nitrate compound fertilizers adipic acid pickling of metals and in other industries

Storage and transportation

Non concentrated (weak) nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Non concentrated (weak) nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Non concentrated (weak) nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Non concentrated (weak) nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

AppearanceColorless or yellow liquid without mechanical impurities

Nitric acid (HNO3) min 580

Nitrogen oxide as (N2O4) max 015

Sulfates (SO4) max 00020

Phosphates (РО4) max 00020

Chlorides (Сl) max 000050

Iron (Fe) max 000030

Non concentrated (weak) nitric acidAcids 15

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 10: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Reagents Nitric acidNormative document ТU U 241-33270581-0282008

Chemical formula HNO3

Application

Nitric acid is used in radioelectronics heavy and light industries for chemical and electrochemical pickling as reagent and many other fields of science and technology

Storage and transportation

Nitric acid is transported by railway motor sea and river transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Nitric acid is transported in transport packaging in covered rw wagons by wagonloads by motor transport ndash in covered transport means by sea and river transport ndash on freight vesselsrsquo decks

Nitric acid is stored in the manufacturerrsquos packaging in covered warehouses

Nitric acid to be shipped in bulk should be stored in stainless steel storage facilities

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value for ldquoP (pure)rdquo grade

Nitric acid (HNO3) min 56

Residue on ignition as sulfates max 0005

Sulfates (SO4) max 00020

Phosphates (PO4) max 0002000

Chlorides (Cl) max 000050

Iron (Fe) max 000030

Heavy metals (Pb) max 000002

Arsenic (As) max 0000003

Acids 17

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 11: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Acetic acid synthetic Normative document GOST 19814-74

Chemical formula СН3СООН

Application

Acetic acid synthetic is used in chemical pharmaceutical light industries and in other fields of national economy

Storage and transportation

Acetic acid synthetic is filled in and transported in clean railway tanks with stainless steel internal surface and upper drain or in 200 l stainless steel drums and in 20 l glass bottles Acetic acid synthetic can be transported in aluminum tanks and 20 l (max) drums

Drums and bottles with acetic acid synthetic are transported by railway motor and water transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic is stored in hermetically sealed steel or aluminum bulk containers Drums and bottles with acetic acid synthetic are stored in warehouses or under the shed providing adequate protection against moisture conditions

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance and color Colorless transparent liquid without mechanical impurities

Solubility in water Complete solution is clear

Acetic acid min 995

Acetaldehyde max 0004

Formic acid max 005

Sulfates (SO4) max 00003

Chlorides (Cl) max 00004

Heavy metals precipitated by hydrogen sulfide (Рb) max 00004

Iron (Fe) max 00004

Nonvolatile residue max 0004

Color stability of KMnO4 solution min min 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3 5H2O) = 01 moldm3 max

50

Sulfuric acid test Should stand test according to 314 GOST 19814-74

Acids 19

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 12: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Acetic acid synthetic food grade Normative document ТU U 201-33270581-0122013

Chemical formula СН3СООН

Application

Acetic acid synthetic food grade is used for production of water solutions of acetic acid synthetic food grade in agriculture and food industry as preserving agent (food additive E260)

Storage and transportation

Acetic acid synthetic food grade is packed in stainless steel drums (capacity up to 450 dm3) in plastic containers (capacity up to 60 dm3) in plastic drums and containers (capacity up to 450 dm3) and in bulk liquid IBCs (capacity up to 1000 dm3) in glass bottles (capacity up to 10 dm3) in PE drums

Acetic acid synthetic food grade is transported by railway motor and river and sea transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Acetic acid synthetic food grade is stored in packages and in tightly sealed storage tanks stainless steel containers in the roofed warehouses or under the shed providing adequate protection of the product against moisture conditions

Guaranteed storage life 1 year from the date of manufacture

Guaranteed storage life of acetic acid in plastic containers

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue for acetic acid with concentration

50plusmn1 60plusmn1 70 plusmn1 80plusmn1 Min 997

Appearance and color Colorless clear liquid without mechanical impurities

Odor Acid odor typical for acetic acid no foreign smell

Solubility in water Full solution is clear

Acetic acid min 50plusmn1 60plusmn1 70 plusmn1 80plusmn1 997

Acetaldehyde max 0002 0004 0004

Formic acid max 003 005 005

Sulfates (SO4) max 00002 00003 00003

Chlorides (Cl) max 00001 00001 00001

Heavy metals (Рb) max 000008 000008 000008

Iron (Fe) max 00001 00001 00001

Nonvolatile residue max 0002 0002 0002

Rhodium max 000005 000005 000005

Methyl iodide max 000002 000002 000002

Arsenic (As) max 000007 000007 000007

Color stability of KMnO4 solution min min 60 60 60

Substances oxidized with potassium bichromate cm3 sodium thiosulphate solution concentration C (Na2S2O3bull5H20) = 01 moldm3 max

50 50 50

Acids 21

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 13: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Low dicarboxylic acids (mixture) Normative document TU UA 241-05607824-0452007

ApplicationLow dicarboxylic acids grade A are used in production of polyesters esters and some acids which are the part of this mixture

Low dicarboxylic acids grade B are used in concrete manufacture

Storage and transportationLow dicarboxylic acids are stored packed in dry closed warehouses

Bags loaded with low dicarboxylic acids are to be stacked in piles of no more than 20 m high on pallets of any type

Low dicarboxylic acids packed into flexible containers FIBC are to be stacked no more than 2 tiers high on pallets of any type

Low dicarboxylic acids can be transported by all means of transportation in accordance with cargo carriage transportation applicable to a particular transportation mode

Guaranteed storage life 1 year from the date of manufacture After 1 year low dicarboxylic acids should be tested to comply with TU U 241-05607824-0452007

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description

Value

Grade А (purified) Grade B (non-purified)

Premium quality First quality

Appearance Light-yellow or light-brown flakes Green to gray flakes

Acid value mg KOHg 700ndash900 700ndash900 700ndash900

Copper le0001 le0008 le15

Vanadium le0005 le001 le05

Iron le0008 le0015 Not rated

Moisture le20 le20 Not rated

Low dicarboxylic acids

Adipic acid 8ndash25 8ndash25

Not ratedGlutaric acid 45ndash84 45ndash84

Succinic acid 8ndash32 8ndash32

Color of 10 water solution Hazen units le170 le250 Not rated

Acids 23

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 14: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Gases

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 15: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Nitrogen gaseous Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen gaseous is used to create inert atmosphere at the production storage and transportation of easily oxidizable products in high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines as well as for other purposes

Storage and transportation

Nitrogen gaseous is transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal

pressure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

27Gases

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 16: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Nitrogen liquid Normative document DSTU GOST 92932009

Chemical formula N2

Application

Nitrogen liquid is used as refrigerant and also (after gasification) for creation of inert atmosphere at the production storage and transportation of easily oxidizable products at high-temperature processes of metal treatment not interacting with nitrogen for conservation of closed metal containers pipelines etc

Storage and transportation

Nitrogen liquid is transported by all means of transportation in accordance with car-go carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure besides nitrogen nominal pres-sure at 20 degС in cylinders is (150plusmn05) mPa (150plusmn5) kgfcm2) or (200 plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

Extra pure Improved purity Technical

First quality Second quality First quality Second quality First quality Second quality

Nitrogen min 99999 99996 9999 9995 996 990

Oxygen max 00005 0001 0001 005 04 10

Water vapour in nitrogen gas max 00007 00007 00015 0004 0009

Should stand the test according to point 36 of DSTU GOST 92932009

Oil content in nitrogen gas Not determined Should stand the test according to point 37 of DSTU GOST 92932009

Content of oil mechanical impurities and moisture in liquid nitrogen Should stand the test according to point 38 of DSTU GOST 92932009

Hydrogen max 00002 0001 Not rated

Carbon-containing compounds in terms of СН4 max 00003 0001 Not rated

29Gases

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 17: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Argon gaseous and liquid Normative document GOST 10157-79

Chemical formula Ar

Application

Argon gaseous and liquid is used as protective gas during welding cutting and melting of active and rare metals and their alloys aluminum magnesium and aluminum alloys stainless nickel-chromium heat-resisting alloys and different alloy steel grades metal purification

Storage and transportation

Argon gaseous is injected into steel cylinders or in high-pressure gas cylinders under pressure of (147plusmn05) mPa Argon liquid is loaded in special tank cars designed for transportation of liquid argon

Argon gaseous and liquid саn be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Guaranteed storage life of gaseous argon 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

Argon min 99993 99987

Oxygen max 00007 0002

Nitrogen max 0005 001

Aqueous vapour max corresponding to saturation temperature under pressure of 1013 kPa (760 mm Hg) degС max

00009

minus61

0001

minus58

Carbonaceous compounds as CO2 max 00005 0001

31Gases

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 18: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Acetylene pyrolysis dissolved technicalNormative document ТU U 201-33270581-0372014

Chemical formula С2Н2

Application

Acetylene pyrolysis dissolved technical is designed for flame machining acetylene lighting unit laboratory works etc

Storage and transportation

Acetylene pyrolysis dissolved technical is transported in steel cylinders by any transportation mean equipped with special devices for cylinder transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Motor transportation facilities must be equipped with special means for gas cylinders carriage

Cylinders filled with acetylene paralysis dissolved technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight

Guaranteed storage life of acetylene in cylinders

6 months max

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Acetylene acetylene and diene hydrocarbons volume ratio min

991

including

а) Methylacetylene min 015

b) Diacetylene max 0003

Oxygen and carbon dioxide volume ratio max 09

Aqueous vapour volume ratio at 20 ordmС and 1013 kPa mgm3 max

600

corresponding saturation temperature at 760 mm Hg degС max

minus23

Note If acetylene cylinders are stored more than 15 days volume ratio of air and carbon dioxide can be 13 max

33Gases

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 19: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Liquefied carbon dioxideNormative document DSTU 48172007

Chemical formula CO2

Application

Liquefied carbon dioxide is used in production of carbonated beverages in machine construction for metal welding in agriculture to stimulate growth of plants and as feed preservative agent in medical industry as solvent for production of medical plants extracts in firefighting etc

Storage and transportation

Liquefied carbon dioxide is transported in cylinders by all means of transportation in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

During transportation cylinders should be placed horizontally with pads between them or vertically with safety rings and anti-fall barriers provided that the units are densely loaded

Liquefied carbon dioxide is stored vertically in special warehouses or at open areas under cover that protects from atmospheric precipitation and direct sunrays

Liquefied carbon dioxide is stored in isothermal storage vessels (tanks) placed on open areas under cover or without it if there is no production necessity

Guaranteed storage life

in isothermal tanks ndash 6 months from the date of manufacture

in cylinders ndash 2 years from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Odour and flavour Slightly sour flavour without foreign odours

Carbon dioxide (СО2) min 999 995 990

Mineral oils and mechanical impurities Should stand the test according to point 105 of DSTU 48172007

Carbon oxide (СО) Below test-sensitivity according to point 106 of DSTU 48172007

Nitrogen oxide (NO NO2) Below test-sensitivity according to point 106 of DSTU 48172007

Sulphur dioxide (SО2) gm3 max 0002 0004 0005

Hydrogen sulphide (H2S) Should stand the test according to point 108 of DSTU 48172007

Hydrochloric acid Should stand the test according to point 109 of DSTU 48172007

Ammonia and ethanolamine Should stand the test according to point 1010 of DSTU 48172007

Water max Below test-sensitivity according to point 1011 of DSTU 48172007 01

Water vapours at temperature 20 degС and pressure 1013 kPa (760 mm of mercury) gm3 max 0037 0076 0184

Saturation temperature of carbon dioxide with water vapours at pressure 1013 kPa (760 mm of mercury) gm3 and temperature 20 degС max minus48 minus42 minus34

Aromatic hydrocarbons Should stand the test according to point 1013 of DSTU 48172007

Vanadium oxide (in terms of V2O5) for liquefied carbon dioxide mgkg max 002 01 02

35Gases

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 20: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

37Gases

Oxygen gaseous technicalNormative document DSTU GOST 55832009

Chemical formula O2

Application

Oxygen gaseous technical is used for flame treatment of metals and other technical needs

Storage and transportation

Technical oxygen is transported in steel cylinders at pressure (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2) at 20 degС Cylinders filled with

oxygen are transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with oxygen are stored in special warehouses or at open areas under cover that protects cylinders from atmospheric precipitation and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production sites

PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Water vapors max 0007 0009

Hydrogen max 03 05

Carbon dioxide max Not rated

Carbon oxide Not rated

Gaseous acids and bases Not rated

Ozone and other oxidizing gases Not rated

Alkali Should stand the test according to point 39 of DSTU GOST 55832009

Odour Not rated

Solid carbon dioxide (dry ice)Normative document GOST 12162-77

Chemical formula СО2

Application

Solid carbon dioxide is used for low temperature generation in refrigerated processing storage transportation and sales of frozen and chilled foods by means of direct or indirect contact with them and although for process purposes

Storage and transportation

Solid carbon dioxide is packed into clean nitrogen storage containers or other nitrogen storage tanks Solid carbon dioxide can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode Railway transportation should be carried out in covered wagons

Blocks of solid carbon dioxide should be stored in special warehouses and nitrogen storage containers under atmospheric pressure

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance White blocks

CO2 9996ndash9998

Mineral oil Should stand 34 GOST 12162-77

Hydrogensulfide Should stand 35 GOST 12162-77

Hydrochloric acid Should stand 36 GOST 12162-77

Sulfurous and nitrogenous acids organic compounds (alcohols ethers aldehydes acids) Should stand 37 GOST 12162-77

Ammonium and monoethanolamines Should stand 38 GOST 12162-77

Odor and taste Should stand 39 GOST 12162-77

Aromatic hydrocarbons (including benzene) Should stand 310 GOST 12162-77

Residue after evaporation 002ndash004

37Gases

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 21: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

39Gases

Oxygen liquid technical Normative document GOST 6331-78

Chemical formula O2

Application

After gasification oxygen liquid technical is used for flame treatment of metals and other technical needs

Storage and transportation

Oxygen liquid technical is transported in cylinders by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and Rules for Design and Safe Operation of Vessels under pressure

Cylinders filled with gases are stored in special warehouses or at open areas under cover that protects them from atmospheric precipitation and direct sunrays

Storage and transportation of filled cylinders are prohibited at temperature more than 60 degС

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy) PJSC CONCERN STIROLrdquo

Specifications

DescriptionValue

First quality Second quality

Oxygen min 997 995

Ethyne Absence Absence

Carbon dioxide in 1 dm3 of liquid oxygen cm3 at 20 degС and 1013 kPa (760 mm of mercury) max 20 30

Oil Absence Absence

Carbon oxide Not rated Not rated

Gaseous acids and bases Not rated Not rated

Ozone and other oxidizing gases Not rated Not rated

Moisture and mechanical impurities Should stand the test according to point 39 of GOST 6331-78

Odour Not rated

Oxygen gaseous medicalNormative document DSTU GOST 55832009

Chemical formula О2

Application

Oxygen gaseous medical is used for therapeutic application and breathing

Storage and transportation

Oxygen gaseous medical is transported in steel cylinders by all means of transportation in accordance with regulations concerning the carriage of dangerous goods and Rules

for Design and Safe Operation of Vessels under pressure provided that nominal pressure in cylinders at 20 degС is (147plusmn05) mPa (150plusmn5 kgfcm2) or (196plusmn10) mPa (200plusmn10 kgfcm2)

Cylinders filled with oxygen gaseous medical are stored in special warehouses or at open areas providing adequate protection of the product against moisture conditions and direct sunrays

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 995

Water vapors max 0009

Carbon dioxide max 001

Carbon oxide Should stand the test according to point 36 DSTU GOST 55832009

Gaseous acids and bases Should stand the test according to point 37 DSTU GOST 55832009

Ozone and other oxidizing gases Should stand the test according to point 38 DSTU GOST 55832009

Odor Absence

39Gases

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 22: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

41Gases

Oxygen gaseous technicalNormative document ТU U 201-33270581-0212013

Chemical formula О2

Application

Oxygen gaseous technical is used for deposit welding of metals light-weight alloys for modernization of manufacturing processes in metallurgy chemistry and other industries

Storage and transportation

Oxygen gaseous technical is loaded into medium size steel cylinders meeting the requirements of NPAOP 000-159 (Rules for Design and Safe Operation of Vessels under pressure)

Cylinders with oxygen gaseous technical is transported by motor transport in accordance with regulations of dangerous goods transportation and fire safety regulations

Oxygen gaseous technical can be transported by gas pipeline

Cylinders filled with oxygen gaseous technical are stored in special warehouses or at open areas under the shed providing adequate protection of the product against moisture conditions and direct sunlight at 35 degС max and in compliance with the requirements of fire safety regulations

Guaranteed storage life 18 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Oxygen min 95

Aqueous vapour max0009

Note 1 Upon agreement with the customer it is allowed not to specify aqueous water content

2 It is allowed to deliver oxygen with basic substance content agreed in the contract

41Gases

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 23: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Organic products

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 24: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Vinyl acetateNormative document ТU U 201-33270581-0112012

Application

Vinyl acetate is used in production of polyvinyl acetate polyvinyl alcohol polyvinyl acetals and copolymers of vinyl chloride ethylene and other unsaturated compounds

Storage and transportation

Vinyl acetate is transported by railway and motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Vinyl acetate is transported in tank wagons and tank containers owned by consignerconsignee and by road tank cars made of stainless steel or aluminum according to applicable regulatory documents

Vinyl acetate is stored in tightly sealed vessels made of aluminum or stainless steel at +40 degC max for inhibited vinyl acetate and at +15 degC max for non-inhibited

If storage temperature is more than 40 degC appropriate actions must be taken to cool vinyl acetate in warehouses Storage conditions of vinyl acetate should avoid its contact with acids alkalis and polymerization initiators

If stored or transported for more than 48 hours in period from May 1 till September 30 and if ambient temperature exceeds 15 degC hydroquinone should be added to vinyl acetate in quantity of (0001-0005) of vinyl acetate mass

By customerrsquos request hydroquinone can be added if the ambient temperature is lt 15 degС

When appropriate polymerization inhibitor is separated from vinyl acetate rectificate by means of distillation

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless transparent liquid without mechanical impurities

Density at 20 degС gcm3 0932ndash0936

Vinylacetate min 9990

Acetaldehyde max 0025

Crotonic aldehyde max Absence

Acid as acetic acid max 0005

Water max 005

Hydroquinone

а) prior to inhibition max 00005

b) after inhibition 0001ndash0005

Polyvinylacetate sample Must pass the test

Du Pont polymerization activity at 760 mm Hg min max 22

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 0035

Polyvinyl acetate molar viscosity in benzene Pabulls min (determined by customerrsquos request) 000025

45Organic products

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 25: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

47Organic products

Aqueous hydroxylamine sulfate Normative document ТU U 00203826019-99

Application

Aqueous hydroxylamine sulfate is used in production of lactam at the stage of oxima-tion in manufacturing of crystallized product and as floatation agent

Storage and transportation

Aqueous hydroxylamine sulfate is transported in railway and automobile tanks by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Aqueous hydroxylamine sulfate is stored in containers made of Х18Н13М2Т or 12Х17Н13М2Т steel or in rubber-coated vessels

Storage temperature requirements ndash from minus 7 degС to plus 50 degС

Guaranteed storage life 1 month from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance Clear colourless liquid

Hydroxylamine sulfate gdm3 min 275

Free sulfur acid gdm3 max 22

Ammonium sulphate gdm3 max 20

Density gcm3 1170ndash1210

Crystalline caprolactam Normative document GOST 7850-86

Application

Crystalline caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Crystalline caprolactam is transported by covered railway cars high-capacity containers or covered trucks in accordance with cargo carriage regulations applicable to a particular transportation mode

Crystalline caprolactam is stored in covered premises

Guaranteed storage life 2 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

47Organic products

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 26: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

49Organic products

Liquid caprolactamNormative document GOST 7850-86

Application

Liquid caprolactam is used to produce chemical fibers and strings polyamide resins

Storage and transportation

Liquid caprolactam is transported in special tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Liquid caprolactam is stored in vessels under nitrogen blanket provided that volume content of oxygen in nitrogen is max 00005

Guaranteed storage life 15 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality Second quality

Permanganate index units max 4 5 (6) 7 (8)

Chromaticity of caprolactam aqueous solution with mass fraction 50 Hazen units max 30 40 50

Volatile bases mmolkg max 04 05 06

Crystallization temperature degС min 688 688 688

Iron max 000002 000002 000002

Cyclohexanone oxime max 0002 0002 0002

Optical density of caprolactam solution with mass content 50 max 004 005 (006) 006 (008)

Alkalinity mmolkg max 01 01 005

Acidity mmolkg max 005 005 01

pH of 20 aqueous solution 67ndash73 67ndash73 67ndash73

Cyclohexanol distillation residue (CDR)Normative document ТU UA 241-05607824-0522010

Application

Cyclohexanol distillation residue (CDR) is used as plasticizer in paint and varnish pro-duction as foaming agent during coal flotation as additive to liquid fuels and as raw material for production of hydrogen-sulfide corrosion inhibitors

Storage and transportation

Cyclohexanol distillation residue (CDR) is stored in leak proof tanks under nitrogen blanket

Cyclohexanol distillation residue (CDR) can be transported by railway or road in accor-dance with dangerous goods regulations applicable to a particular transportation mode

Cyclohexanol distillation residue (CDR) in bulk can be transported by railway tank wag-on in accordance with DSTU 3445 (GOST 10674) or by truck tank

Guaranteed storage life 6 months from the date of manufacture After 6 months CDR should be tested to comply with TU U 241-05607824-0522010

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

Appearance Homogeneous viscous liquid dark-brown color without visible mechanical particles

Density at 20 degС gcm3 098minus118

Cyclohexanol le 20

49Organic products

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 27: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

51Organic products

Cyclohexanone light fraction (CLF)Normative document ТU UA 241-05607824-0512010

Application

Cyclohexanone light fraction (CLF) is a waste product of adipic acid production which can be used as paint and varnish thinner and motor fuel additive

Storage and transportation

Cyclohexanone light fraction (CLF) is stored in carbon steel tanks equipped with tight fitting hatches under nitrogen blanket Tanks should be cleaned of previously stored products

CLF is carried by railway or car according to regulations of dangerous goods transportation

CLF in bulk is transported by railway tank wagon in accordance with DSTU 3445 (GOST 10674) or by truck

Tanks should be filled with consideration of maximum use of their capacity and volume dilatation of the product during transportation in case of temperature extremes Product temperature upon loading should not exceed 30 degС

Storage and transportation must insure protection of the product against moisture and contamination

Guaranteed storage life 6 months from the date of manufacture After 6 months CLF should be tested to comply with TU U 241-05607824-0512010 in case of positive results the product can be used as intended

Рroduced at OSTCHEM production site PJSC ldquoRIVNEAZOTrdquo

Specifications

Description Value

AppearanceTransparent colorless or yellowish liquid with no visible mechanical impurities

Density at 20 degС gcm3 max 082

Cyclohexanone min 15

Combined alcohols min 40

Water min 12

POD oil Normative document ТU U 201-33270581-0232012

Application

POD oil is used as plastisizer in paint and coating industry as foam generator in coal flotation as additive to oil fuel and as raw material in production of hydrogen-sulfide corrosion inhibitor

Storage and transportation

POD oil is transported by railway and by road in accordance with cargo carriage regulations applicable to a particular transportation mode

POD oil is stored in closed warehouses in metal tanks under N2 atmosphere

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceHomogeneous dark brown liquid containing no apparent mechanical impurities

Density at 20 degС gcm3 098ndash103

Water max 3

Volatiles max 70

Sodium hydroxide (alkali content in terms of NaOH) max 08

51Organic products

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 28: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Crude methanolNormative document TU 113-05-323-77

Chemical formula СН3ОН

Application

Crude methanol is used in gas and oil industry to prevent formation of gas hydrate in pipelines during production and transportation of natural and associated gas to carry out test of new wells and after total overhaul

Storage and transportation

Crude methanol can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode and according to General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Crude methanol is transported by railway in rw tank cars by road ndash in drums

Crude methanol is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Colorless or tint liquid without mechanical impurities

Density ρ20 gcm3 max 0818

Water max 90

Organics min 910

рН (medium) min 70

Ammonia max(determined in crude methanol produced in the process of rectification of methanolwater solution in hexamine production)

20

53Organic products

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 29: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Methanol technicalNormative document DSTU 3057-95 (GOST 2222-95)

Chemical formula СН3ОН

Application

Methanol technical grade A is used for main organic synthesis processes

Methanol technical grade B is used in oil and gas industry to remove gas hydrates in pipelines in welltesting and in chemical pharmaceutical and microbiological industry for extraction condensation and other kinds of processes

Storage and transportation

Methanol technical can be transported by all means of transportation in accordance with cargo carriage regulations applicable to a particular transportation mode

Methanol technical is transported by railway in rw tank cars by road ndash in drums

Methanol technical is stored in accordance with storage regulations for flammable and toxic liquids and in accordance with General Sanitary Rules for Methanol Handling No 4132-86 of 18071986

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Colorless transparent liquid without insoluble impurities

Density at 20 degС gcm3 0791ndash0792 0791ndash0792

Miscibility with water Miscible with water shows no signs of milkness and opalescence

Temperature ranges

boiling point degС 640ndash655 640ndash655

99 of product is distilled within ranges degС max 08 10

Water max 005 008

Free acids as formic acid max 00015 00015

Aldehydes and ketons as acetone max 0003 0008

Volatile iron compounds as iron max 000001 00005

Testing with potassium premaganate minutes min 60 30

Ammonia and amino compounds as ammonia max 000001 ndash

Chlorine max 00001 0001

Sulphur max 00001 0001

Non volatile residue after evaporation max 0001 0002

Specific electric conductivity Sm max 3times10-5 ndash

Ethyl alcohol max 001 ndash

Color Pt-Co scale Hazen units max 5 ndash

55Organic products

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 30: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

57Organic products

De-icing agent AGR-1Normative document ТU U 246-33270581-0012011

Application

De-icing agent AGR-1 is used to prevent ice formation and to remove snow ice or frost from cement asphalt-concrete macadam and other kinds of roads at ambient temperature of -15 degС

De-acing agent AGR-1 is applied to prevent ice formation and to remove ice

Storage and transportation

De-icing agent AGR-1 packed is transported in covered rw wagons by wagonloads in closed cargo rooms and on decks of cargo vessels and in top covered motor transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

De-icing agent AGR-1 is stored in leak proof containers in warehouses or under the shed at the ambient temperature

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Appearance Transparent or slightly turbid liquid from colorless to yellowish

Sodium acetate trihydrate 38ndash42

Density at 20 degС gcm3 1125ndash1140

pH-value 90ndash110

Formalin technical grade FM Normative document GOST 1625-89

Application

Formalin technical grade FM is used in production of synthetic resins synthetic rubber surface-active substances polyatomic alcohols formals and other methylene derivatives

Formalin technical grade FM is found its wide application in paper industry to improve dura-bility and quality of paper in leather industry ndash for leather tanning in textile industry ndash to im-prove shrink and crease resistance of fabrics in agriculture ndash for treatment of seeds and root vegetables disinfection of soil and livestock houses in medicine ndash as anti-infective agent

Storage and transportation

Formalin technical grade FM is packed in PE bottles cans aluminum stainless or steel drums with anticorrosive coating with capacity up to 200 dm3

Formalin technical grade FM is transported by railway andor road in top covered transportation facilities and in bulk in rw tank wagons in aluminum or nickel free stainless steel tank cars in accordance with cargo carriage regulations applicable to a particular transportation mode

Formalin technical grade FM is stored in heated containers made of materials that provide preservance of quality of the product at 10-25 degС in manufacturerrsquos packages in heated warehouses at 10-25 degС

Guaranteed storage life 3 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Premium quality First quality

AppearanceColorless transparent liquid Turbidity and white sediment soluble

at 40 degС max can be formed upon storage

Formaldehyde 372plusmn03 370plusmn05

Methanol (acceptable value is 10 max as agreed with the customer) 4ndash8 4ndash8

Acids as formic acid max 002 004

Iron max (can be determined by the manufacturer by the customerrsquos request) 00001 00005

Residue after calcinations max (can be determined by the manufacturer by the customerrsquos request) 0008 0008

57Organic products

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 31: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

59Organic products

Spirit fraction of caprolactam productionNormative document ТU U 243-00203826-0332005

Application

Spirit fraction of caprolactam production may be used as corrosion inhibitor in specific processes of chemical technology as solvent for production of siccatives in paint-and-varnish industry

Storage and transportation

Spirit fraction of caprolactam production is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Spirit fraction of caprolactam production is stored in closed containers in warehouses that protect from atmospheric precipitation and direct sunrays

Guaranteed storage life 12 months from the date of manufacture if it is stored in closed containers

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Grade А Grade B

Appearance Clear colorless or yellowish liquid without visible mechanical impurities

Density at 20 degС gcm3 min 082 080

Acid index mg КОН for 1 g of product max 006 015

Distillation temperature thresholds

а) temperature at the start of distillation degС min 90 80

b) temperature at the end of distillation degС max 175 175

Closed cup flash point degС min 28 26

Volatility in terms of xylene 25ndash45 25ndash45

Cyclohexane technical Normative document GOST 14198-78

Application

Cyclohexane technical is used in production of isomers for chemical fibres and as solvent

Storage and transportation

Cyclohexane technical is transported in specific railway tanks in accordance with cargo carriage regulations applicable to a particular transportation mode

Cyclohexane technical is stored in containers at warehouses designated to store highly inflammable liquids

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Colorless clear liquid without mechanical impurities

Impurities defined by chromatography max 01 02

such as

Benzene max 0005 001

Methylcyclopentane max 0015 004

Methylcyclohexane max 002 01

n-Heptane max 001 005

Sulfur max 000015 Not rated

59Organic products

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 32: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Cyclohexanone technical Normative document GOST 24615-81

Chemical formula C6Н10O

Application

Cyclohexanone technical is used for organic synthesis of production adipic acid and caprolactam and as solvent for nitrates acetyl cellulose fats natural resins polyvinylchloride basic dyes and other substances

Storage and transportation

Cyclohexanone technical is transported in steel rw tank cars road tank trucks in steel drums

Cyclohexanone technical tank cars are transported in accordance with Liquid Cargo Regulations for transportation in bulk in rw tank cars and in open hopper wagons

Drums with cyclohexanone technical are transported by rw in top covered wagons or by motor transport covered with tarpaulin

Cyclohexanone technical for caprolactam production is transported in vessels under nitrogen blanket

Cyclohexanone technical is stored in vessels with nitrogen blanketing at 400 mm WC in warehouses intended for storage of highly flammable substances

Guaranteed storage life 6 months from the date of manufacture 30 days from the date of manufacture for the product to be used in caprolactam production

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoRIVNEAZOTrdquo PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Cyclohexanone min 998

Impurities max 01

Water max 01

61Organic products

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 33: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Resins and polymers

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 34: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Products made of polystyrene for packing foodNormative document ТU U 14338211001-95

Application

Products made of polystyrene for packing food are widely used for packing cold hot (at temperature 50 degC) foodstuff eggs meat poultry sausage products cheese vegetables fruit fish confectionery etc

Storage and transportation

Products made of polystyrene for packing food are stored in covered warehouses on wooden pallets at least 1 m away from heating devices The products should be protected from direct sunlight

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

On a surface of the products scratches foreign inclusions blisters are not allowed

Product code Product size mm Product weight g

Н-100 270times136times20 775plusmn065

Н-99 270times136times35 881plusmn070

G-91 250times175times10 815plusmn075

G-90 250times175times20 984plusmn076

G-89 250times175times35 1080plusmn087

F-88 210times155times30 800plusmn064

F-87 210times155times10 640plusmn051

F-86 210times155times30 800plusmn064

F-85 210times155times20 704plusmn057

E-82 225times100times20 483plusmn039

D-81 222times133times10 594plusmn050

D-80 222times133times20 656plusmn052

D-79 222times133times33 660plusmn060

D-77 222times133times16 650plusmn050

D-40 222times133times40 721plusmn059

Product code Product size mm Product weight g

I-73 175times85times10 260plusmn090

I-72 175times85times20 310plusmn090

C-71 178times133times10 470plusmn042

C-70 178times133times20 488plusmn042

C-69 178times133times25 542plusmn042

B-60 125times125times15 327plusmn026

Z-195 270times235times35 1780plusmn090

EB-110 250times100 1493plusmn057

AV-2 225times160times35 800plusmn090

EH-1 265times135times128times68 590plusmn027

ALB-1 410times278times53 2630plusmn090

ALB-2 410times270times53 2710plusmn090

ALB-3 271times270times53 1560plusmn090

T-200B 205times20 560plusmn040

T-200C 205times28 560plusmn040

65Resins and polymers

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 35: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Foamed polystyrene products for fixed timberingNormative document ТU U V 27-252-31615086-0042006

Application

Foamed polystyrene products for fixed timbering are intended for use in building and placement reconstruction by modern energy saving technology Application of foamed polystyrene products for fixed timbering is very wide with their use low and multistory houses are under active construction as well as lightweight houses (for summer residence) individual covered swimming-pools deep freeze warehouses vegetable storehouses offices etc

Storage and transportation

Foamed polystyrene products for fixed timbering are stored separately according to types and grades in warehouses It is allowed to store the products in packing on outdoor covered areas protected from humidity and direct sunlight During the storage period on outdoor covered areas products should be put on supports with the binding clamp not to be higher than 3 m

Guaranteed storage life 12 months from the date of manufacture

Upon the guaranteed storage life expiration products may be applied according to their purpose after checking of compliance of their quality to requirement of normative document

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance Compliance to samples approved in accordance with the established procedure by manufacturer

Density of foamed polystyrene products kgm3 20ndash25

Durability on compression at 10 of linear deformation pressure MPa min 010

Durability limit at a bend MPa min 018

Foamed polystyrene boxesNormative document ТU U 252-31615086-0032009

Application

Foamed polystyrene boxes are used for storing and transporting food (seafood meat and meat offal poultry dairy products etc) for making incubators also for storing and transporting vegetables and fruit

Storage and transportation

Pe bag-packed products are stored in warehouse protected from direct sunlight The boxes are stored on foamed polystyrene blocks not more 3 m high and at least 1 m away from heating devices

Storage life is not limited

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Surface of foamed polystyrene boxes should be clean without scratches foreign impurities cleavage inflation Main characteristics size and accuracy of the geometric shape should correspond the normative document and fit the press-form Cover of the box should have a tight and accurate enter into box till stop Incompatibility of the geometric shapes of parts of box and cover not allowed Boxes and covers are packed and shipped separately

67Resins and polymers

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 36: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Polyethylene pasted bags with valvesNormative document ТU U 222-33270581-0242013

Application

Polyethylene pasted bags with valves are used for packaging transportation and storage of individual and bulk products Can be an ideal packing solution for chemicals fertilizers polyolefin granules PVC polyamide polystyrene and others as well as building materials (cement lime and others) food products (sugar flour salt and other) and agricultural products (potatoes carrots onions and others)

By the customerrsquos request PE bags can be made in different colors with point perforation for air release

One or two sides of PE bag can be overprinted with one or two colored flexography

Storage and transportation

PE bags are stored in closed warehouses ensuring protection against contamination damage and direct sunlight exposure In heated premises PE bags are stored at 1 m (minimum) from heating devices

PE bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation modeTransportation facilities must be clean dry and without any protruding parts If transport facility has sharp protruding parts they must be wrapped in paper or other suitable material

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Adhesive strength Ncm min 50

Drop strength number of drops 3

Flexo printing durability grade 2ndash3

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

Bottom and Top width with valve mm

1 40 840 500 130

2 48 750 600 140

3 46 840 550 130

4 39 820 500 130

5 35 730 500 130

6 30 730 450 130

7 32 800 440 130

8 33 680 500 130

9 33 610 550 130

10 38 750 500 140

11 45 730 600 130

12 12 440 400 90

Polyethylene chemicals bags (flat soldered bags)Normative document GOST 17811-78

Application

Polyethylene chemicals bags are used for packing transportation and storage of dry granulated chemicals with temperature not exceeding +60 degС

Polyethylene chemicals bags are used for packing of different kinds of products in case they keep safe storage and adequate quality

Storage and transportation

Polyethylene chemicals bags can be stored in closed premises ensuring protection against direct sunlight exposure

In heated premises Polyethylene chemicals bags are stored at 1 m (minimum) from heating devices

Polyethylene chemicals bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Bag No Rated volume dmЗ Length mm Width mm

1 10 550 380

2 40 800 550

3 45 855 550

4 45 900 500

5 50 900 600

б 50 950 500

7 50 1000 500

8 100 1440 550

By request polyethylene chemicals bags can be made in different colors with one or two colored flexography on one or both sides

69Resins and polymers

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 37: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Film liner bagsNormative document GOST 19360-74

Application

Film liner bags can be inserted into transport packages PP bags intended for packing of chemical products construction materials food and agricultural products

Storage and transportation

Protection of film liner bags against direct sunlight is required during transportation and storage

In heated premises film liner bags are stored at 1 m (minimum) from heating devices

Film liner bags can be transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 10 years (identical to storage life length of the film they are made of)

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Basic dimensions

Length Width Film thickness

500ndash1440 mm 400ndash640 mm 15ndash100 μm

For big bags

Length Width Film thickness

3000 mm max 2600 mm max 40ndash400 μm

Polyethylene film

Normative document GOST 10354-82

Application

Polyethylene film is used in agriculture land and water engineering as packing material in different kinds of industry in production of consumer goods and others

Storage and transportation

Polyethylene film is stored in covered warehouses intended to protect goods against direct sunlight in horizontal position at 5 to 40 degС minimum 1 m from heating devices

Polyethylene film is transported by all means of transport in top closed transport facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life

polyethylene film M N T and SK grades with no additives ndash 10 years

polyethylene film SIK ST SM V V1 grades and М Т N and SK grades with additives ndash 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethylene film constructions tubular half tubular flat or folded

Polyethylene film grades M N Т ST SIK SK SМ V V1 withwithout color withwithout stabilization

Dimensions

width 400ndash800 mm thickness 25ndash400 μm

width 1400ndash3000 mm thickness 40ndash400 μm

Polyethylene film with width of 1200 mm maximum can be overprinted with 4-color printing

71Resins and polymers

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 38: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Polyethylene shrink film Normative document GOST 25951-83

Application

Polyethelene shrink film can be used as wrapping material for single- and multi-unit packing for packing of the goods in consumer containers and for palletizing

Storage and transportation

Packed polyethelene shrink film is stored in covered warehouses ensuring protection against direct sunlight in horizontal position at +40 to -50 degС minimum 1 m away from heating devices

Polyethylene shrink film is transported by all means of transport in top closed trans-port facilities in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 3 years from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Polyethelene shrink film construction tubular half tubular flat folded

Polyethelene shrink film grades О U Т P withwithout color withwithout stabilization

Dimensions

width 200ndash3000 mm thickness 30ndash200 μm

Polyethelene shrink film with width of 1200 mm maximum can be overprinted with 4-color printing

Foamed polystyrene plates PSB-F grades G-15 G-25 G-35Normative document DSTU B V27-8-94

Application

Foamed polystyrene plates are used for thermal isolation as middle layer in construction cladding and industrial equipment Provided foamed polystyrene plates have no contact with interior space Temperature of insulated surfaces should not exceed 80 degС

Storage and transportation

Foamed polystyrene plates are stored in covered warehouses protected from direct sunlight at least 1 meter away from heating devices

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

G-15

Description Value

Density kgm3 Not more 15

Compression strength at 10 linear deformation MPa min 005

Bending strength MPa min 007

Description Value

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0042

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 3

G-25

Description Value

Density kgm3 151ndash250

Compression strength at 10 linear deformation MPa min 010

Bending strength MPa min 018

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0039

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

G-35

Description Value

Density kgm3 251ndash35

Compression strength at 10 linear deformation MPa min 016

Bending strength MPa min 025

Thermal conductivity in dry condition at temperature (25plusmn5) degC W(MK) max 0037

Humidity of plates shipped to the consumer max 12

24 hour water absorption of by volume max 2

73Resins and polymers

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 39: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Expandable polystyrene EPS grade 500 (less than 056) (503 (056-0315))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (92 respectively)

Blowing agent fraction of total mass min 45 (40 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS Grade 400 (10-04) (405 (08-0315) 407 (10-063))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 98 (98 98 respectively)

Blowing agent fraction of total mass min 52 (48 52 respectively)

Limit of free combustion 2 sec

75Resins and polymers

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 40: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Expandable polystyrene EPS grade 300 (18-08) (309 (14-08) 310 (18-125))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 95 (95 94 respectively)

Blowing agent fraction of total mass min 54 (54 54 respectively)

Limit of free combustion 2 sec

Expandable polystyrene EPS grade 200 (25-14) (211 (20-14))Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in the factory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96 (95 respectively)

Blowing agent fraction of total mass min 54 (54 respectively)

Limit of free combustion 2 sec

77Resins and polymers

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 41: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Expandable polystyrene EPS grade 100 (above 25 mm)Normative document ТU U 241 - 05761614-0172008

Application

Expandable polystyrene EPS is intended for the production of heat- and sound-insulating blocks plates panels and other industrial products various types of packaging including for food

Storage and transportation

Expandable polystyrene EPS is stored in closed ventilated dry warehouses at a temperature not exceeding 25 degC on pallets separated from the floor for at least 5 cm It is prohibited to store the product with any heating appliances turned on

Expandable polystyrene EPS packed in polypropylene bags of 25 kg octabins or big bags of 1000 kg Packed expandable polystyrene EPS should not be exposed to direct sunlight

Guaranteed storage life

from the date of manufacture in thefactory sealed and unopened by consumer package is as follows

at a temperature of 10 degC ndash 4 months

at a temperature of 10 degC to 20 degC ndash 2 months

at temperatures above 20 degC ndash 1 month

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Total mass of particles of main fraction min 96

Blowing agent fraction of total mass min 54

Limit of free combustion 2 sec

General purpose polystyrene GPPS-115Normative document GOST 20282-86

Application

General purpose polystyrene GPPS-115 is used for the manufacture (by a method of moulding under pressure) of products for industrial use consumer goods

Storage and transportation

General purpose polystyrene GPPS-115 is stored in closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS-115 packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS-115 should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80 +-10

Rupture strenght MPa (kgscm2) min 402 (410)

79Resins and polymers

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 42: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

General purpose polystyrene GPPS 150 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 25ndash50

Rupture strenght MPa (kgscm2) min 409 (418)

General purpose polystyrene GPPS 170 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 50ndash80

Rupture strenght MPa (kgscm2) min 402 (410)

81Resins and polymers

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 43: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

General purpose polystyrene GPPS 190 ENormative document ТU U 241-05761614058 ndash 2004

Application

General purpose polystyrene GPPS is used for the manufacture of products for industrial use consumer goods products used in various industries For the production of XPS-plates

Storage and transportation

General purpose polystyrene GPPS is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

General purpose polystyrene GPPS packed in polypropylene bags of 25 kg big bags of 1000 kg Packed general purpose polystyrene GPPS should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 80ndash110

Rupture strenght MPa (kgscm2) min 377 (385)

High-impact polystyrene HIPS-275MNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 40ndash80

Elongation at rupture min 250

83Resins and polymers

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 44: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

High-impact polystyrene HIPS-435ЕNormative document ТU U 241-05761614-0652010

Application

High-impact polystyrene is intended for the production of products for industrial use items that come into contact with food packaging for pharmaceuticals toys consumer goods internal parts for refrigerators and freezers

Storage and transportation

High-impact polystyrene is stored in a closed ventilated dry storage areas on shelves or pallets min 5 cm from the floor level min 1 meter away from heating elements It is prohibited to store the product with any heating appliances turned on

High-impact polystyrene packed in polypropylene bags of 25 kg big bags of 1000 kg Packed high-impact polystyrene should not be exposed to direct sunlight

Guaranteed storage life

1 year from the date of manufacture in the factory sealed and unopened package

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Melt flow index g10 min 20ndash50

Elongation at rupture min 400

85Resins and polymers

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 45: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Urea-formaldehyde resinNormative document

ТU U 201-33270581-0292013 Urea-formaldehyde resin low-toxicrdquo

ТU U 201-33270581-0142012 ldquoUrea-formaldehyde resinrdquo

Application

Urea-formaldehyde resin grade KF-MT-10 is used in production of wood fiberboard

Urea-formaldehyde resin grade КF-МТ-15 КF-МТ-15U is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) and plywood for furniture making and other purposes

Urea-formaldehyde resin grade КF-МТ-50 is used in production of thermal insulating materials (plastic foams)

Urea-formaldehyde resin grade КFS КFК-80 КFК-85 can be added to urea to preserve its quality during transportation (anti-caking agent)

Urea-formaldehyde resin grade КFK-70 КFК-80 КFК-85 is used as raw material in production of low-toxic urea-formaldehyde resin

Storage and transportation

Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is stored in closed containers protected against direct sunlight and moisture conditions at 5-25 degС with regular agitation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is loaded into rw tank wagons tank truck tanks steel drums which ensure quality during transportation Urea-formaldehyde resin grade КF-МТ-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 is transported by tank trucks and rw tank wagons in accordance with cargo carriage regulations to a particular transportation mode When ambient temperature exceeds 25 degС transportation should not last more than 10 days

Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is stored in closed containers made from aluminum or stainless steel or from carbon steel coated with the epoxy resin that protect product against direct sunlight and moisture conditions at 5-40 degС Urea-formaldehyde resin grade КFS КFК-70 КFК-80 КFК-85 is loaded into stainless steel or aluminum rw tank cars at ambient temperature Temperature of the product must not exceed 40 degС

Guaranteed storage life

urea-formaldehyde resin grade KF-MT-10 КF-МТ-15 КF-МТ-15U КF-МТ-50 ndash 45 days from the date of manufacture

urea-formaldehyde resin grade КFС КFК-70 КFК-80 КFК-85 ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

КFS КFК-70 КFК-80 КFК-85

Appearance Homogeneous transparent or turbid colorless or yellowish liquid without foreign impurities

Urea 20ndash26 20ndash24 23ndash27 24ndash28

Formaldehyde 50ndash60 46-50 53-57 57-61

Color Hazen units mgdm3 Pt max 300 300 300 300

рН-level ndash 70ndash85 70ndash85 70ndash85

DescriptionValue

КF-МТ-10 КF-МТ-15 КF-МТ-15 U КF-МТ-50

Appearance Homogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue

а) at 105 ordmС min 670 640ndash680 min 670 500ndash650

b) at 120 ordmС(value is optional till 31122014)

650ndash670 ndash ndash ndash

Free formaldehyde max 010 015 015 05

ВЗ-246 viscosity with 4 mm nozzle s(During guaranteed storage it is allowed to increase relative viscosity to 200 s maximum)(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

45ndash120 45ndash80 70ndash100 15ndash60

pH-level 80ndash90 75ndash85 75ndash85 75ndash85

Gelatinization time at 100 degС s 40ndash55 50ndash70 45ndash60 25ndash60

Limit ratio for resin and water mix when volume coagulation is reached(More strict value for grade КF-МТ-10 is to be specified by the customer in the contract (agreement))

12ndash110 12ndash110 12ndash110 min 13

Shearing rupture stress along adhesive ply of a sample after soaking in water during 24 hours mPa min

ndash 16 16 ndash

Density at 20 degС gcm3 1270ndash1290 ndash ndash ndash

Miscibility with water min(value is optional till 31122014)

12 ndash ndash ndash

87Resins and polymers

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 46: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Urea-formaldehyde resin ldquoKafomidrdquo Normative document ТU U 241-05761614044-2002

Application

Urea-formaldehyde resin ldquoKafomidrdquo grade KF-MT-O is used as binder in production of wood chipboard (WCB) wood fiberboard (WFB) plywood as well as in construction

Storage and transportation

Urea-formaldehyde resin ldquoKafomidrdquo is stored in closed containers in warehouses protected from direct sunlight and precipitation at temperature not exceeding 25 degC away from open flame Storing of urea-formaldehyde resin ldquoKafomidrdquo together with strong oxidizing agents acids and strong alkalis is not allowed

Urea-formaldehyde resin ldquoKafomidrdquo is transported by rail and road in packaged form as well as in bulk by tank trucks and rail tank cars It is recommended to transport urea-formaldehyde resin ldquoKafomidrdquo in tanks with thermal insulation

Guaranteed storage life 45 days from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

AppearanceHomogeneous suspension from white to pale-yellow color without foreign impurities

Dry residue 660plusmn2

Free formaldehyde max 015

Relative viscosity at (20plusmn05) degС by viscosimeter VZ-246 (or VZ-4) with 4 mm nozzle s 40ndash80

Hydrogen ion concentration рН 75ndash85

Gelatinization time at 100 degС s 45ndash80

Limit ratio for resin and water mix when volume coagulation is reached at (20plusmn05) degC 12ndash110

Urea-formaldehyde resin grade KFSNormative document ТU U 241-05761614-0062007

Application

Urea-formaldehyde resin grade KFS-85 is used as raw material in production of low-toxic urea-formaldehyde and melamine-urea-formaldehyde resins with low molarity as well as for production of foamed urea-formaldehyde styrofoam Also urea-formaldehyde resin grade KFS-85 is used in production of urea as anti-caking agent to preserve its quality during transportation and storage

Storage and transportation

Urea-formaldehyde resin grade KFS-85 is stored at temperature 5-20 degC in tightly closed containers in warehouses protected from direct sunlight and precipitation away from heating sources and open flame Storing of urea-formaldehyde resin grade KFS-85 together with strong oxidizing agents acids and alkalis is not allowed

Urea-formaldehyde resin grade KFS-85 is transported by rail and road in packaged form ndash in closed trucks in bulk ndash by rail tank cars and tank trucks It is recommended to transport urea-formaldehyde resin grade KFS-85 in tanks with thermal insulation

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Urea 22ndash26

Formaldehyde 57ndash63

АРНА color at tdeg from 0 degС to 25 degС max 30

Hydrogen ion concentration рН 65ndash85

Density at 20 degС kgm3 1310plusmn20

Methanol max 03

Buffer capacity cm3 of HCl solution with molarity (HCl) = 05 moledm3 max 12

Refraction index at 25 degС min 1460

VZ-4 relative viscosity sec max 120

89Resins and polymers

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 47: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Ion-exchange resins Anionites Grade АВ-17-8Normative document GOST 20301-74

Application

Anionites grade АВ-17-8 are used for purification ejecting concentrating and separation of substances in different fields of economy for analytical purposes and as catalysts in organic synthesis

Anionites grade АВ-17-8 are used in water treatment hydrometallurgy purification of waste and return waters chemical industry

Storage and transportation

Anionites grade АВ-17-8 are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Anionites grade АВ-17-8 are transported in covered means of transport

At temperature below 0 degС anionites grade АВ-17-8 are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport anionites grade АВ-17-8 packed in containers by open rolling stock

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

Premium quality First quality

Appearance Spherical grains of light-yellow to dark-brown colour

Granulometry

а) grain size mm 0315ndash125 0315ndash125

b) effective size fraction min 95 93

c) effective size of grains mm max 04ndash06 06

d) uniformity factor max 17 18

Moisture 35-50 35ndash50

Bulk volume factor in ОН-form cm3g 30plusmn03 30plusmn03

BET surface area m2g ndash ndash

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 115 100

Equilibrium static exchange capacity mmolcm3 (mgbulleqvcm3) min 100 090

Dynamic exchange capacity mmolm3 (gbulleqvm3) min 700 690

Filtrate oxidation in terms of oxygen mgl max 055 065

Osmotic stability min 925 85

Chloride ion mgcm3 max ndash ndash

Alkali mmolg (mgbulleqvg) max ndash ndash

Iron max ndash ndash

Anionite content in СО3-form max ndash ndash

Bleaching capacity min ndash ndash

91Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 48: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 KU-2-8 chS KU-23 1060Normative document GOST 20298-74

Application

Cation exchangers grade KU-2-8 are used for water treatment wastewater purification in hydrometallurgy electroplating

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of different elements to receive highly purified substances in food medical and pharmaceutical industries

Cation exchangers grade KU-23 1060 are used for water treatment separation and ejecting of nonferrous and rare metals for separation and purification of different substances in chemical industry in electroplating

Storage and transportation

Strongly acidic cation exchangers are stored packed in clean and dry warehouses at temperature not lower than 2 degС at the distance of not less than 1 m from heating bodies

Strongly acidic cation exchangers are transported in covered means of transport

At temperature below 0 degС strongly acidic cation exchangers are transported in heated transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature above 0 degС it is possible to transport strongly acidic cation exchangers packed in containers by open rolling stock

It is prohibited to transport strongly acidic cation exchangers with anionites and corrosive substances

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description

Value

KU-2-8 KU-2-8 chS KU-23 1060

Premium quality First quality

Appearance Spherical grains of yellow to dark-brown coloursSpherical grains of light-gray to dark-gray colours

Granulometry

а) grain size mm 0315-1250 04-125 0315-1250

b) effective size fraction min 96 95 96 95

c) effective size of grains mm max 040-055 035-055 045-065 ndash

d) uniformity factor max 17 18 17 ndash

Moisture 48ndash58 48ndash58 48ndash58 50ndash70

Bulk volume factor in ОН-form cm3g 28 28 27 40

BET surface area m2g ndash ndash ndash 5-25

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 18 18 180 110

Dynamic exchange capacity mmolm3 (gbulleqvm3)

with complete regeneration of ionite ndash ndash 1600 ndash

with fixed flow of regenerating substance 526 520 ndash 410

Filtrate oxidation in terms of oxygen mgg max ndash ndash 05 ndash

Osmotic stability min 945 85 96 93

Filtrate pH min ndash ndash 45 ndash

Iron max ndash ndash 003 ndash

Chloride ion mgcm3 max ndash ndash 00015 ndash

Sorptive capacity by streptomycin mkgg max ndash ndash ndash ndash

93Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 49: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schSNormative document ТU U 241-00203826-0402009

Application

Cation exchangers grade KU-2-8 chS are used for water fine purification in water treatment separation of substances in different fields of economy to receive highly purified substances in food industry

Cation exchangers grade KU-2-8 Na chS are used in water treatment at the facilities of low and medium capacities to soften water for household needs

Cation exchangers grade KU-2-8 Na schS are used to soften water at the enterprises of food industry They may be used in industrial and household facilities to get drinking water Cation exchangers grade KU-2-8 Na schS are characterized with high purity

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life

strongly acidic cation exchangers grade KU-2-8 chS ndash 24 months from the date of manufacture

strongly acidic cation exchangers grades KU-2-8 Na chS KU-2-8 Na schS ndash 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 chS KU-2-8 Na chS KU-2-8 Na schS

AppearanceSpherical grains of yellow to dark-brown colour Single white (grey) and black grains (1 max) are acceptable

Granulometry

а) grain size mm 04ndash125 0315ndash125 0315ndash125

b) effective size fraction min 96 96 96

c) effective size of grains mm max 045ndash065 ndash ndash

d) uniformity factor max 17 ndash ndash

Moisture 48ndash55 43ndash53 45ndash55

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min 180 17 16

Bulk volume factor cm3g max 27 25 26

Dynamic exchange capacity with complete regeneration g-molm3 min 1600 1600 1500

Filtrate oxidation in terms of oxygen mgg max 05 05 05

Filtrate pH (according to GOST 20298-74) pH Min 45 6ndash10 6ndash10

Osmotic stability min 96 ndash ndash

Iron max 003 ndash ndash

Chloride ion mgcm3 max 00015 00015 00014

Filtrate chromaticity degrees max ndash ndash 20

Filtrate odour at 20 degС point max ndash ndash 2

Filtrate pH (according to GOST 2874-82) pH ndash ndash 70ndash85

Filtrate permanganate oxidation mg Odm3 max ndash ndash 2

Bulk mass gcm3 min 070 070 070

95Resins and polymers

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 50: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Ion-exchange resins Strongly acidic cation exchangers Grades KU-2-10 KU-2-10 Na KU-2-8 KU-2-8 Na KU-2-8 Kr KU-2-8 Kr Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 NaNormative document ТU U 241-00203826-0422009

Application

Cation exchangers grades KU-2-10 KU-2-10 Na are used for water treatment to soften technical water in mixed-type filters

Cation exchangers grades KU-2-8 KU-2-8 Na are used for water treatment fine demineralization solution deionization water softening wastewaters purification in mixed-type filters hydrometallurgy electroplating chemical industry

Cation exchangers grades KU-2-8 Kr KU-2-8 Kr Na are used for water treatment water softening at heat supply enterprises of low capacity wastewaters purification

Cation exchangers grades KU-2-6 KU-2-6 Na are used for water treatment fine demineralization solution deionization water softening and wastewaters purification in hydrometallurgy electroplating and chemical industry

Cation exchangers grades KU-2-4 KU-2-4 Na are used for water treatment water softening wastewaters purification in chemical industry

Storage and transportation

Strongly acidic cation exchangers are stored in closed warehouses protecting product from direct sunrays and atmospheric precipitation at temperature not lower than 2 degС If stored in bags the pile height is not to be more than 18 m Distance between strongly acidic cation exchangers and heating bodies is to be minimum 1 m

Strongly acidic cation exchangers are transported in covered means of transport in ac-cordance with cargo carriage regulations applicable to a particular transportation mode

At temperature below 0 degС strongly acidic cation exchangers may be transported only if there is a written permission of purchaser

It is prohibited to transport strongly acidic cation exchangers with oxidizers and corrosive substances

Guaranteed storage life 36 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

DescriptionValue

KU-2-8 Kr KU-2-8 Kr Na KU-2-8 KU-2-8 Na KU-2-6 KU-2-6 Na KU-2-4 KU-2-4 Na KU-2-10 KU-2-10 Na

AppearanceSpherical and irregular-shaped grains of yellow to dark-brown colour Single white or black grains (1 max) are acceptable

Spherical grains of yellow to dark-brown colour Single white (grey) or black grains (1 max) are acceptable

Granulometry

а) grain size mm 0315ndash20 0315ndash20 0315ndash125 0315ndash125 0315ndash125 0315ndash125 0315ndash16 0315ndash16 0315ndash125 0315ndash125

b) effective size fraction min

94 94 96 96 96 96 90 90 96 96

c) effective size of grains mm max

ndash ndash 040-055 ndash ndash ndash ndash ndash ndash ndash

d) uniformity factor max ndash ndash 17 ndash ndash ndash ndash ndash ndash ndash

Moisture 45ndash55 42ndash55 48ndash55 43ndash48 55ndash65 47ndash55 65ndash75 58ndash68 45ndash52 40ndash44

Bulk volume factor cm3g max

29 24 27 24 33 26 44 36 25 22

Full-scale static exchange capacity mmolcm3 (mgbulleqvcm3) min

ndash ndash 18 18 16 16 12 12 20 20

Full-scale exchange capacity mmolcm3 min

ndash ndash 19 19 16 18 ndash ndash ndash ndash

Dynamic exchange capacity mmolm3 min

1400 1500 1600 1700 1500 1500 ndash ndash ndash ndash

Osmotic stability min 94 94 945 90 85 80 ndash ndash ndash ndash

Bulk mass gcm3 min 070 070 070 070 070 070 070 070 070 070

At the request of a purchaser KU-2-8 and KU-2-8 Na cation exchangers can be manufactured with grain size stated in the table below

Description Value

Grain size mm 04ndash125 05ndash125 063ndash125 071ndash125 08ndash125

97Resins and polymers

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 51: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Copolymer of styrene and 8 divinylbenzene coarse fraction

Normative document ТU U 241-00203826-028-2003

Application

Copolymer of styrene and 8 divinylbenzene coarse fraction is an intermediate for synthesis of different grades of polymerization ion-exchangers it is used in water treatment as filtrating material of mechanical filters for purification of turbine condensate from mechanical impurities

Storage and transportation

Copolymer of styrene and 8 divinylbenzene coarse fraction is stored in closed unheated warehouses that protect product from direct sunrays and atmospheric precipitation If stored in bags the pile height is not to be more than 18 m

Copolymer of styrene and 8 divinylbenzene coarse fraction is transported in covered means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 12 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

Appearance

Spherical and irregular-shaped grains free from foreign matter and impurities

Granulometry

a) grain size mm 04ndash25

b) effective size fraction min 95

c) including fraction sized 04 - 08 mm max 5

Bulk mass gcm3 04ndash08

Filtrate oxidation in terms of oxygen mgdm3 max 055

99Resins and polymers

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 52: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Other products

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 53: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Technical sodium nitrate which does not cakeNormative document ТU U 241-05761614-0152011

Chemical formula NaNO3

Application

Technical sodium nitrate which does not cake is used in glass chemical metallurgical and other industries

Storage and transportation

Technical sodium nitrate which does not cake is stored in covered warehouses in packing It is not allowed to store sodium nitrate together with organic combustible substances in order to avoid self-ignition of the latters

Technical sodium nitrate which does not cake is transported in covered railway cars covered decked vessels and covered trucks Combined transportation of technical sodium nitrate which does not cake with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 995

Water max 05

Substance insoluble in water max 003

Chloric salts (in terms of NaCl) max 03

Oxidized substances in terms of NaNO2 max 02

Anti-caking agent in terms of main substance 005ndash02

Friability min 80

103Other products

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 54: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Sodium nitrate technical Normative document GOST 828-77

Chemical formula NaNO3

Application

Sodium nitrate technical is used in glass chemical metallurgical and other industries

Sodium nitrate technical of grade A is used for preparation of fluxes for soldering and welding of metals production of chemical reagents pyrotechnic mixtures optical glass crystal and in the industries where content of oxidizable substances in terms of NaNO2 is strictly limited

Sodium nitrate technical of grade B is used for pickling of metals alloyage of lump tungsten waste clarifying of technical glasses and for retailment

Sodium nitrate technical is an alkaline fertilizer it alkalizes slightly the ground so it is the most effective on acid soils in combination with water-soluble forms of phosphorus and potassium fertilizers Sodium nitrate technical is used in the basal fertilizing in early spring when drill fertilizing for sugar beet feeding beet and red beet and as top dressing ndash during the growing season

Storage and transportation

Sodium nitrate technical is packed in a five-layer laminated paper bags in five- and six-layer bitumen-impregnated bags polyethylene liner bags enclosed in impregnated five-layer paper bags or in any other bags according to the regulatory documents ensuring the safety of the product

Sodium nitrate technical is transported by vehicles of all kinds except the air transport in closed vehicles in accordance with cargo carriage regulations applicable to a particular transportation mode Transportation of packaged product is performed by carload shipments

Sodium nitrate technical should be stored in covered warehouses in packing It is allowed if packed in special soft containers to store it on open-aired areas the lower layer must be placed on pallets and flooring Sodium nitrate technical is toxic non-flammable fire hazardous Oxidizing agent Contributes to self-ignition of combustible materials

Guaranteed storage life is not limited

Рroduced at OSTCHEM production sites

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrate in terms of dry substance min 998 995

Water max 05 05

Fraction of total mass of substance insoluble in water max 003 003

Chloric salts in terms of NaCl max 015 03

Oxidized substances in terms of NaNO2 max 0010 02

Iron in terms of Fe2O3 max 0001 -

Chrome in terms of Cr2O3 max 00001 -

105Other products

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 55: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Sodium nitrate technical treated with anticaking agentNormative document ТU U 241-33270581-0022011

Chemical formula NaNO3

Application

Sodium nitrate technical treated with anticaking agent grade A is used in flux production for welding and soldering of metals in production of reagents pyrotechnic mixtures optical glass and crystal glass production on production units where impurities of oxidizers as NaNO2 are strictly limited

Storage and transportation

Sodium nitrate technical treated with anticaking agent is packed in 5- 6-layer bitu-men-impregnated or laminated paper bags PP PVE bags with PE liner PP hose fabric sewed bags with PE liner PE bags big-bags

Sodium nitrate technical treated with anticaking agent is transported in packages in covered rw wagons by wagonloads in covered motor transport facilities in closed car-go rooms and on decks of cargo vessels in accordance with regulations of dangerous goods transportation applicable to a particular transportation mode

Sodium nitrate technical treated with anticaking agent is stored packed in covered warehouses preventing wetting and watering During storage of sodium nitrate tech-nical treated with anticaking agent fire safety regulations preventing self-ignition fire and explosion should be observed

Guaranteed storage life 1 year

Shelf life of the product is unlimited

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description Value

Premium quality (Grade A)

Appearance White clear crystals with grayish or yellowish tint

Sodium nitrate on dry basis min 998

Water max 05

Insoluble in water substances max 003

Chlorides as NaCl max 015

Oxidizers as NaNO2 max 0010

Iron as Fe2O3 max 0001

Chrome as Cr2O3 max 00001

Sulphanol as active substance max 005ndash03

ldquoPetro-AGrdquo as active substance max 005ndash02

Friability min ndash

107Other products

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 56: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

109Other products

Sodium nitrite with anti-caking agentNormative document ТU U 05761614014-98

Chemical formula NaNO2

Application

Sodium nitrite with anti-caking agent is used in the production of azo dyes rubber products in construction as frost-resisting agent to concrete in engineering in galvanics as a corrosion inhibitor

Storage and transportation

Sodium nitrite with anti-caking agent should be stored in unheated rooms in the original package Storage of this product with other substances is not allowed

Sodium nitrite with anti-caking agent is transported by railway or by other means of covered transport Combined transportation of sodium nitrite with anti-caking agent with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 ndash

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated residue max 003 003 007

Water max 05 14 25

Anti-caking agent in terms of main substance 005ndash03 005ndash03 005ndash03

Friability min 75 75 75

Technical sodium nitriteNormative document GOST 19906-74

Chemical formula NaNO2

Application

Technical sodium nitrite is used in the production of azo dyes rubber products in con-struction as frost-resisting agent to concrete in engineering in galvanics as a corro-sion inhibitor

Storage and transportation

Technical sodium nitrite should be stored in unheated rooms in the original package Storage with other substances is not allowed

Technical sodium nitrite is transported by railway or by other means of covered transport Combined transportation of technical sodium nitrite with combustible materials and foodstuffs is not allowed

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

DescriptionValue

Premium quality First quality Second quality

Appearance White transparent crystals with grayish or yellowish tint

Fraction of total mass of

Sodium nitrite (NaNO2) min 990 985 970

Sodium nitrate (NaNO3) max 08 10 23

Chloric salts in terms of NaCl max 01 017 ndash

Insoluble in water calcinated resudue max 003 003 007

Water max 05 14 25

109Other products

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 57: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

111Other products

Melt of sodium carbonateNormative document ТU U 201-00203826-0442013

Chemical formula Na2CO3

Application

Melt of sodium carbonate is used for purification of wastewaters (to neutralize acid wastewaters) for production of technical solutions in chemical industry in production of nonmetallic materials

Storage and transportation

Melt of sodium carbonate is transported by railway and automobile transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Melt of sodium carbonate is stored in warehouses that protect product from moisture

Storage temperature requirements ndash from minus 30 degС to plus 50 degС

Guaranteed storage life 6 months from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoAZOTrdquo (Cherkasy)

Specifications

Description Value

AppearanceIrregular pieces and bullions of different sizes colours from light gray to light brown Green shade is possible

Alkali (sodium carbonate (Nа2СО3)) min 850

Loss at vaporization max 150

Sodium nitrite reagents (food grade)Normative document GOST 4197-74

Chemical formula NaNO2

Application

Sodium nitrite reagents (food grade) are used in the meat industry as a preservative agent in meat products as well as in the production of curing mixtures

Storage and transportation

Sodium nitrite reagents should be stored in the original package in warehouses

Sodium nitrite reagents is transported by all means of transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Guaranteed storage life 2 years from the date of manufacture

Рroduced at OSTCHEM production site PJSC ldquoCONCERN STIROLrdquo

Specifications

Description Value

Sodium nitrite (NaNO2) min 990

Substance insoluble in water max 0005

Chloride max 001

Sulphate max 001

Heavy metals (Pb) max 00005

Iron max 00004

Potassium max 0001

111Other products

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 58: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

113Other products

Ammonium carbonateNormative document GOST 9325-79

Application

Depending on application ammonium carbonate is produced in two grades

grade А ndash for organic synthesis and production of chemical reagents

grade B ndash for flotation painting chrome-tanned leather neutralization etc

Storage and transportation

Packed in PE bags ammonium carbonate can be transported by wagonload in covered railway wagons on covered deck vessels by covered motor transport in accordance with cargo carriage regulations applicable to a particular transportation mode

Ammonium carbonate is stored in stacks in covered unheated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

DescriptionValue

Grade А Grade B

Appearance Crystals of white gray or pink color

Ammonia (NH3) min 210 207

Residue on ignition max 0008 002

113Other products

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 59: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

Ammonium hydrocarbonate technical and food gradeNormative document ТU U 201-33270581-0362013

Chemical formula NH4HCO3

Application

Ammonium hydrocarbonate technical and food grade is used in light and chemical industry and as food additive for pastry

Storage and transportation

Ammonium hydrocarbonate technical and food grade is transported in covered rw wagons and canvas covered motor transport in accordance with regulations of danger-ous goods transportation applicable to a particular transportation mode

Ammonium hydrocarbonate technical and food grade is stored in stacks in covered un-heated ventilated warehouses temperature in the warehouse should not exceed 35 degС

Guaranteed storage life 1 year from the date of manufacture

Рroduced at OSTCHEM production site

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

Specifications

Description

Value

Technical Food grade

Grade А Grade B

Appearance Crystals of white gray or pink color Crystals of white color

Ammonia (NH3) min 210 207 209

Residue on ignition max 0008 002 0008

Organic impurities - -Should stand test as per cl 66 ТU U 201-33270581-0362013

Heavy metals (Рb) max - - 00005

Arsenic (As) max - - 00001

Iron (Fe) max - - 0001

Chloride ions (Сl) max - - 0001

Insoluble in water substances max - - 0005

115Other products

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 60: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN

PJSC ldquoCONCERN STIROLrdquo

PJSC ldquoAZOTrdquo

PJSC ldquoRIVNEAZOTrdquo

PrJSC ldquoSEVERODONETSK AZOT ASSOCIATIONrdquo

10 Horlivskoi Divizii Street Horlivka Donetsk region 84610 UkraineTel +380 6242 7-89-26 Fax +380 6242 7-82-43wwwostchemcom

72 Pershotravneva Street Cherkasy 18014 UkraineTel +380 472 39-63-03 39-61-27 Fax +380 472 54-01-46 64-03-36wwwostchemcom

Rivne-17 33017 UkraineTel +380 362 61-22-03Fax +380 362 61-80-10wwwostchemcom

5 Pivovarova Street Severodonetsk Luhansk region 93403 UkraineTel +380 645 71-32-75 71-21-71 71-29-92 Fax +380 645 71-45-88 71-24-99 71-33-01wwwostchemcom

AS ldquoNITROFERTrdquo

1 Jaumlrvekuumlla tee Kohtla-Jaumlrve 30197 EstoniaTel +372 337-83-10 Fax +372 337-84-90wwwostchemcom

Page 61: Chemical Products Catalogueostchem.com/docs/Ostchem-organic-EN.pdf · as a company that operates Group DF ... In 2014 Estonian nitrogen fertilizer producer ... Ammonium nitrate CAN