chases, CAPS & DAMPERS€¦ · BigTop Chimney Cap, Stainless Steel BigTop Chimney Cap, Copper...

1585-492-2780

10-Minute Chase 10-Minute Chase ...................................... 2

Chimney Caps - Wood HYC............................................................ 6 HYC Custom Caps ...................................... 9 Vacustack ................................................ 11 Weathershield ........................................ 10

Other Chimney Top Dampers ............................ 12 Custom Chase Tops ................................... 4 Exhausto Fans ......................................... 14

Table of Contents

chases, CAPS & DAMPERS

2 www.empiredistributing.net

10-Minute Chase

OptionsItem No Description Dealer Cost

SME-4 Extension, for Small Chase (Adds 16” in height) $189 Dealer CostSME-4-32 Extension, for Small Chase (Adds 32” in height) $229 Dealer CostLRGE-4 Extension, for Large Chase (Adds 16” in height) $229 Dealer CostLRGE-4-32 Extension, for Large Chase (Adds 32” in height) $269 Dealer Cost

• Dramatically Reduces Installation Time• No special carpentry skills necessary• Constructed of SIP Panels (Structured Insulated Panels) • Support system eliminates the need to penetrate the collar of the house, eliminating the relocation of pre-existing

wiring and plumbing• Stronger than stick built chase• Complete installation may be done in-house

Benefits

ChasesItem No Description Dealer Cost

SMB-4SR Small Chase with Shed Roof $1,099 Dealer CostSMB-4GR Small Chase with Gable Roof $1,099 Dealer CostLRGB-4SR Large Chase with Shed Roof $1,259 Dealer CostLRGB-4GR Large Chase with Gable Roof $1,259 Dealer Cost

10-Minute

3585-492-2780

10-Minute Chase

Chase with

Gable Roof

Chase with

Shed Roof

Chase with Gable Roof& Optional Extension

(16” or 32”)

Small Chase Large Chase

A 72 ½” 73 ⅞”B 23 ⅞” 26 ½”C 52 ¾” 59”

D1* 43 ½” 51 ¾” D2** 63” NA

E 19” 22”F 43 ¾” 50”H 16”/32” 16”/32”

Small Chase Large Chase

A 74 ¼” 75 ⅝”B 23 ⅞” 26 ½”C 52 ¾” 59”

D1* 43 ½” 51 ¾” D2** 64 ½” NA

E 19” 22”F 43 ¾” 50”H 16”/32” 16”/32”

Shed Roof Dimensions

Gable Roof Dimensions

Floor of Chase can be adjusted for height.

*Measured with floor flush to the bottom of the chase to the top of the base side wall.

**Measured with floor flush to the bottom of the chase to the bottom side of the roof.

• Constructed of SIP Panels (Structured Insulated Panels) • Stronger than Stick-Built Construction• More Installer Friendly than Previous Chase Design • Backed & Manufactured by Licensed R-Control SIP

Products Manufacturer

4” Thick Wall Chase = R-16Greater R-Values can be achieved by adding additional foam board to the interior or exterior of the chase.

Gable Roof

Shed Roof

Features

R-Value

New SIP Panels - Building with SIPs will save you time, money and labor!

Patent No. US6,988,336 B2Note: Actual assembly time could exceed 10 minutes.

Dimensions

Note: Roofs have a 4” overhang on front and side

10-Minute


Description Retail

Stainless Steel (40” x 30” or smaller) $389Galvanized (40” x 30” or smaller) $259Copper (40” x 30” or smaller) To be quoted

Custom Chase Top Sizes

Description Retail


Description Retail


Round Collar Drip Edge

3” Standard Return

40” or Less

30” or Less

52” or Less

40” or Less

110” or Less

40” or Less

40” x 30” or Smaller



To order a chase top, our “Chase Top Order Form” must be completed. When ordering you will need to provide:

• Metal Type• The length and width of the chase top• The Return size (if larger than 3”)• The distance from the outside of the chase top to the

center of the round collar.• Number of round collars if more than one.• Round Collar diameter • Any irregularities in chase construction.

Note: Location of the Round Collar can vary.

Additional Charges• Additional Round Collars – Add $66.00 each• Chase Tops requiring Standing Seams require

additional charges.• Special Orders can be quoted any time.• Copper Chase Top to be quoted.• For a return larger than 3”, there will be additional

charges.

Custom Chase TopSpecial Order - NO Returns

See page 5 for Order Form

CODE 19/35

5585-492-2780

Custom Chase TopQuote/Order Form

Dimensions for Chase Top with one hole

Dimensions for 2nd hole, if applicable

Fax to: 585.492.2785Call for Quote & Lead Time

Special Order - NO Returns

1. Length (position 1)

2. Width (clockwise from 1)

3. Length (clockwise from 2)


5. 1st Hole Dimensions

• Width (position A)

• Length (position B)

6. 2nd Hole Dimensions (if applicable)

• Width (position C)

• Length (position D)

How to Order:1. Measure the distance of each side of the chase2. It is recommended to add ¼” to the length and width for ease of fit and to cover any irregularities in chase construction. 3. Check diagonal measurements to make sure chase is square.4. Please note any irregularities.5. For hole locations, measure distance from side of the chase top to the center of the hole.6. Enter dimensions below:

Return SizeStandard 3”

Other

Stainless Steel

Galvanized

Copper

Metal Type

Dimensions

Number of Holes1 Diameter:

2 Diameter:

Store Name:

Contact Name:

Date Needed By:

Today’s Date:

Phone Number:

PO Number:

1

2

3

4

A

B

C

D

Empire Distributing, 7406 Route 98, Arcade, NY 14009

Brand of Pipe: Size of Pipe:

Quote Order

CODE 19/35


Caps

Black Painted Chimney Cap Stainless Steel Chimney Cap Copper Chimney Cap

• Seven-year Limited Warranty• 24 Gauge Single Piece Galvanized Steel Hood with

Scalloped Corners and Drip Edge• 14 Gauge Galvanized Steel Base for Extra Strength• 18 Gauge ¾” Expanded Galvanized Steel Mesh• Attractive Black Powder Coated Paint Finish• Slotted Hex-Head Bolts

• Expanded Metal Mesh turned inward at base to allow cover to rest firmly on tile closing any openings around tile

• Outside mounting provides greater free air-space for better draft

• Optional: Heavy-Duty Leg Kit (for use when flue tile does not extend above crown.)

Black Painted Galvanized Steel Features

Single Flue Chimney Caps

• Hy-C Lifetime Limited Warranty• 100% Stainless Steel• 24 Gauge Single Piece Stainless Steel Hood with

Scalloped Corners and Roll Formed Edges• 16 Gauge Stainless Steel Base for Extra Strength• 18 Gauge ¾” Expanded Stainless Steel Mesh• Stainless Steel Slotted Hex-Head Bolts


• Outside mounting provides greater free air-space for better draft

• Optional: Heavy-Duty Leg Kit (for use when flue tile does not extend above crown.)

304 Stainless Steel Features

• Hy-C Lifetime Limited Warranty• 24 Gauge Single Piece 100% Copper Hood with

Scalloped Corners and Roll Formed Edges• 18 Gauge 3/4” Expanded 100% Copper Mesh• Removable Hood for Easy Chimney Cleaning• 16 Gauge Copper Plated Stainless Steel Base for

Extra Strength

• Slotted Hex-Head Copper Plated Stainless Steel Mounting Bolts

• Outside Band Mounting provides greater free air-space for better draft


Copper Features

See page 7 for item numbers, dimensions and prices.

7585-492-2780

CopperItem No Description Fits Outside Tile Dimension Retail

CP99* 9” X 9” Copper 7 ½” x 7 ½” to 9 ½” x 9 ½” $288CP913* 9” X 13” Copper 7 ½” x 11 ½” to 9 ½” x 13 ½” $329CP1313* 13” X 13” Copper 11 ½” x 11 ½” to 13 ½” x 13 ½” $383CP1318* 13” X 18” Copper 11 ½” x 16 ½” to 13 ¼” x 18 ¼” $411

Caps

CODE 19/40

Item No Description Fits Outside Tile Dimension Retail

CBO99 9” X 9” Black Painted 7 ½” x 7 ½” to 9 ½” x 9 ½” $65CBO913 9” X 13” Black Painted 7 ½” x 11 ½” to 9 ½” x 13 ½” $71CBO918 9” X 18” Black Painted 7 ½” x 16 ½” to 9 ¼” x 18 ¼” $84CBO1313 13” X 13” Black Painted 11 ½” x 11 ½” to 13 ½” x 13 ½” $79CBO1318 13” X 18” Black Painted 11 ½” x 16 ½” to 13 ¼” x 18 ¼” $89CBO1818 18” X 18” Black Painted 16 ½” x 16 ½” to 18” x 18” $114SSLK Leg Kit, Stainless Steel Option to convert to inside fit $16

Single Flue Chimney Caps


SS99 9” X 9” Stainless Steel 7 ½” x 7 ½” to 9 ½” x 9 ½” $88SS913 9” X 13” Stainless Steel 7 ½” x 11 ½” to 9 ½” x 13 ½” $108SS918 9” X 18” Stainless Steel 7 ½” x 16 ½” to 9 ¼” x 18 ¼” $131SS1313 13” X 13” Stainless Steel 11 ½” x 11 ½” to 13 ½” x 13 ½” $110SS1318 13” X 18” Stainless Steel 11 ½” x 16 ½” to 13 ¼” x 18 ¼” $137SS1818 18” X 18” Stainless Steel 16 ½” x 16 ½” to 18” x 18” $169SSLK Leg Kit, Stainless Steel Option to convert to inside fit $16

304 Stainless Steel

Leg Kit in use, Stainless Steel Multi-Pack (4), Stainless Steel

Black Painted Galvanized Steel


MPSS99 9” X 9” Stainless Steel, 4 per pack 7 ½” x 7 ½” to 9 ½” x 9 ½” (Retail $80.25 ea) $326/4 packMPSS913 9” X 13” Stainless Steel, 4 per pack 7 ½” x 11 ½” to 9 ½” x 13 ½” (Retail $92.00 ea) $374/4 packMPSS1313 13” X 13” Stainless Steel, 4 per pack 11 ½” x 11 ½” to 13 ½” x 13 ½” (Retail $103.75 ea) $422/4 pack

Multi-Pack (4 per pack) 304 Stainless Steel

*Special Order


Caps

CODE 19/40

Item No Description Screen to Screen Size Hood SizeStandard

Height Retail

BT1319 13” x 19” Stainless Steel BigTop 13 x 19 20 ¼ x 25 ¼ 8” $187BT1414 14” x 14” Stainless Steel BigTop 14 x 14 20 ¼ x 20 ¼ 8” $149BT1421K 14” x 21” Stainless Steel BigTop 14 x 21 22 ¼ x 34 ½ 8” $188BT1426K 14” x 26” Stainless Steel BigTop 14 x 26 22 ¼ x 34 ½ 8” $208BT1434K 14” x 34” Stainless Steel BigTop 14 x 34 22 ¼ x 46 ½ 8” $245BT1537K 15” x 37” Stainless Steel BigTop 15 x 37 22 ¼ x 46 ½ 8” $251BT1717 17” x 17” Stainless Steel BigTop 17 x 17 25 ¼ x 25 ¼ 8” $187BT1729K 17” x 29” Stainless Steel BigTop 17 x 29 22 ¼ x 34 ½ 8” $219BT1741K 17” x 41” Stainless Steel BigTop 17 x 41 22 ¼ x 46 ½ 8” $251BT1749K 17” x 49” Stainless Steel BigTop 17 x 49 22 ¼ x 58 ¼ 8” $275BT1753K 17” x 53” Stainless Steel BigTop 17 x 53 22 ¼ x 58 ¼ 8” $322

Stainless Steel, BigTop

BigTop Chimney Cap, Stainless Steel BigTop Chimney Cap, Copper

Copper, BigTop

BigTop Multi-Flue Chimney Caps

Item No Description Screen to Screen Size Hood SizeStandard

Height Retail

CBT1729K 17” x 29” Copper BigTop 17 x 29 22 ¼ x 34 ½ 9” $488CBT1741K 17” x 41” Copper BigTop 17 x 41 22 ¼ x 46 ½ 9” $620

• Hy-C Lifetime Limited Warranty• Removable Hood for Easy Chimney Cleaning• Heavy Duty Welded Construction• Scalloped Corners and Roll-Formed Edges add to the

style and safety• Some assembly required• Knocked Down BigTops are assembled at the factory

before shipping to assure the proper fit of all parts

• Tapmark Masonry Screws and Tube(s) of adhesive included (a combination of both methods of attach-ment is recommended.)

• Available in custom made sizes - see page 9• Black and Stainless Steel available in 10” and 14”

heights, Copper available in 12” and 14” heights.

Common Features

Special Order

9585-492-2780

Custom Caps

1. Length (position 1)


3. Length (clockwise from 2)


5. Tile Height (from top of brick*)

How to Order:1. Measure the outside dimensions of all four sides of the top row of brick. We MUST have all four dimensions

and they MUST be exact; to the nearest 1/8 of an inch.2. Measure the tile height from the top of the first row of brick, to the top of the tallest tile.

If measuring for BigTop Model (Crown Mount), measure Tile Height from top of crown.

Fax to: 585.492.2785Call for Quote & Lead Time

StyleBand-Around (Outside Mount)

Skirt Type (Outside Mount)

BigTop (Crown Mount)

Aluminum

Stainless Steel

CopperNot available in Band-Around

Metal Type

Dimensions Outside Chimney Dimensions (top row of brick)

Band-Around Model (Requires Assembly)

Skirt Type, Aluminum Model Design (Requires Assembly) Skirt Type, Copper & Stainless Steel Model Design (Requires Assembly)

The hood overhangs masonry approximately one inch on both sides and ends. 4 ¼” skirt protects cement crown from deterioration due to weather. Available in Alumi-num, Stainless Steel, and Copper.Maximum Base Size: 60”W x 96”L

Skirt Type

The hood overhangs masonry approximately three inches on both sides and ends. The cover attaches securely to the chimney with a 2 ½” draw-band. Four adjustable corner clamps provide ample flexibility for proper fit. Available in Aluminum and Stainless Steel.Maximum Base Size: 48” Wide x 96” Long

Band-Around

Date:

Store Name:

Contact Name:

Phone Number:

PO Number:

BigTop See page 8 for images and description. Maximum Sizes: Copper: 40” W x 88” L, Stainless Steel: 40” W x 88” L, Black: 29” W x 60” L

BlackOnly available in BigTop

Empire Distributing, 7406 Route 98, Arcade, NY 14009

Special Order - NO Returns

Quote/Order Form

Quote Order

CODE 19/40


Item No DescriptionInside

Flue DiameterMaximum

Outside Diameter Retail

WSA-6 6” Round Cap* 6” 13” $94WSA-7 7” Round Cap* 7” 13” $94WSA-8 8” Round Cap* 8” 13” $94WSA-9* 9” Round Cap* 9” 16” $142WSA-10 10” Round Cap* 10” 16” $142

WeatherShield Model WSA

For any brand round chimney other than air-cooled (air-cooled chimneys use WSA-TDW) and masonry chimneys. An exclusive spring-tension con-nector assures a self-adjusting secure fit.

(For Class A Double Wall Packed Insulated Chimney, Single Wall Liner and Masonry Chimneys)

WeatherShield

icp

Item No Description Inside Flue Diameter

MaximumOutside Diameter

Retail

WSA-6TDW 6” Round Cap 6” 16” $179WSA-7TDW 7” Round Cap 7” 16” $179WSA-8TDW 8” Round Cap 8” 16” $179WSA-10TDW 10” Round Cap 10” 16” $260

WeatherShield Model WSA-TDW

For air-cooled chimneys. The TDW line assures a self-adjusting secure wind-resistant fit, without interfering with the convection cooling features of air cooled chimneys. The spring-tension connector enables TDW Weather-Shields to fit Double Wall and Triple Wall Air Cooled Chimneys.

(For Air-Cooled Double Wall and Triple Walled Chimneys)

Item No Description Top Plate Retail

AD-6 6” Masonry Adapter 10”x10” $56AD-614 6” Masonry Adapter 10”x14” $63AD-7 7” Masonry Adapter 10” x10” $56AD-714 7” Masonry Adapter 10”x14” $63AD-8 8” Masonry Adapter 14”x14” $63AD-9* 9” Masonry Adapter 14”x14” $63AD-10 10” Masonry Adapter 14”x14” $63

Adapters(Use with Caps Requiring an Adapter)

A Masonry Adapter is required for installations of a WeatherShield on square or rectangular

chimneys.

Model WSA-TDW for Air-Cooled ChimneysBottom Plate is 16” O.D.

Model WSA for Class A Double Wall Packed Insulated Chimney,

Single Wall Liner, and Masonry Chimneys

CODE 19/40

Universal After Market Caps

Fits Any Brand of Round Chimney!

*Masonry chimneys require an adapter - See Adapters Below

*Special Order

11585-492-2780

Vacu-Stack

Item No Description Retail

VSS-3* 3” Round Vacu-Stack* $110VSS-4* 4” Round Vacu-Stack* $119VSS-6 6” Round Vacu-Stack* $142VSS-7 7” Round Vacu-Stack* $151VSS-8 8” Round Vacu-Stack* $167VSS-10 10” Round Vacu-Stack* $236

Vacu-Stack Model VSS

This is the premier cap for solving common wind-related chimney draft problems caused by conditions such as hills and mountains in the vicinity, tall trees near the chimney, or tall buildings nearby. For round chimneys other than air cooled and for masonry chimneys using the ICP masonry adapter.

Item No Description Bottom Plate Retail

VSS-6TDW 6” Round Air-Cooled Vacu-Stack 16” $220VSS-8TDW 8” Round Air-Cooled Vacu-Stack 16” $252

Vacu-Stack Model VSS-TDW

This is the premier cap for solving common wind-related chimney draft problems caused by conditions such as hills and mountains in the vicinity, tall trees near the chimney, or tall buildings nearby.

(For Class A Double Wall Packed Insulated Chimney, Single Wall Liner and Masonry Chimneys)

(For Air-Cooled Double Wall and Triple Walled Chimneys)


VSS-812 6” x 10” Oval w/Adapter 10”x14” $244

Vacu-Stack for Rectangle Flues(For Masonry Chimneys)

Adapters(Use with Caps Requiring an Adapter)

The Solution for Chimney Draft Problems.

VSS Model for Class A Double Wall Packed Insulated Chimney,

Single Wall Liner, and Masonry Chimney

VSS-TDW Model for Air-Cooled ChimneysBottom Plate is 16” O.D.

VSS Model Installedin Chimney with Masonry Adapter

A Masonry Adapter is required for installations of a VacuStack on square or rectangular chimneys.

CODE 19/40

icp

*Masonry chimneys require an adapter - See Adapters Below


AD-6 6” Masonry Adapter 10”x10” $56AD-614 6” Masonry Adapter 10”x14” $63AD-7 7” Masonry Adapter 10” x10” $56AD-714 7” Masonry Adapter 10”x14” $63AD-8 8” Masonry Adapter 14”x14” $63AD-9 9” Masonry Adapter 14”x14” $63AD-10 10” Masonry Adapter 14”x14” $63

*Special Order


Dampers

Item No Description Fits Inside Flue Sizes Retail

ET88 8” x 8” 7” x 7” to 10” x 10” $261ET817 8” x 17” 7” x 15” to 10” x 18” $333ET913 9” x 13” 7” x 10” to 10” x 13” $267ET1313 13” x 13” 10” x 10” to 13” x 13” $273ET1318 13” x 18” 10” x 15” to 13” x 18” $349ET1818 18” x 18” 15” x 15” to 18” x 18” $408

Chimney Top DampersThe Energy Top Dampers are a low-profile top mounted damper that also serves as a chimney cap. Helps prevent heat loss. Attaches to the top of the chimney’s flue tile liner. Provides a tight, gasketed fit that seals in your heat and seals out weather, insects, birds & animals. A slight pull on the chain releases the spring-loaded top into the open position when you’re ready to burn your fireplace. Constructed of stainless steel & aluminum so components will not rust or corrode. Lifetime Warranty.

Energy Top Damper


102900 Hardware Pack (Includes: chain assembly, bracket, nail anchors and silicone)

$23

1050ET 50’ Cable $22

Replacement Parts

Item No Description Fits Inside Flue Sizes Retail

ETP913 9” x 13” 7” x 10” to 10” x 13” $421ETP1313 13” x 13” 10” x 10” to 13” x 13” $459ETP1318 13” x 18” 10” x 15” to 13” x 18” $498ETP1818 18” x 18” 15” x 15” to 18” x 18” $639

Energy Top PLUS Damper


102900 Hardware Pack (Includes: chain assembly, bracket, nail anchors and silicone)

$23

1050ET 50’ Cable $22

Replacement Parts

CODE 19/40

Energy Top Damper, Closed

Energy Top Damper, Open

Hardware Pack

Energy Top PLUS Damper

Features a stainless steel spark arrestor chimney cap.

Damper comes with 30’ of cable, fireplace mounting bracket with cool-touch spring handle and mounting adhesive and hardware.

Damper comes with 30’ of cable, fireplace mounting bracket with cool-touch spring handle and mounting adhesive and hardware.

13585-492-2780

Top Damper

Dampers

Item No Description Fits Inside Flue Dimensions Retail

TD88 8” x 8” 6” x 6” up to 9” x 9” $225TD913 8” x 13” 6” x 9” up to 9 ½” x 12 ½” $233TD817 8” x 17” 6” x 14” up to 9” x 17 ½” $294TD1313 13” x 13” 9” x 9” up to 12 ½” x 12 ½” $240TD1318 13” x 18” 9” x 14” up to 12 ½” x 17 ½” $306TD1818 18” x 18” 14” x 14” up to 17 ½” x 17 ½” $355


1050ET 50’ Cable $22

Replacement Parts

Seal Tight Damper

Item No Description Min. Outer Dimension of Flue Tile

Max. Outer Dimension of Flue Tile Retail

ST88 8” x 8” 6 ¾” x 6 ¾” 9” x 9” $207ST817 8” x 17” 6 ¼” x 14 ½” 8 ¾” x 16 ¾” $237ST913 9” x 13” 6 ½” x 10 ½” 9” x 12 ¾” $210ST1216 12” x 16” 9 ¼” x 13” 11 ¾” x 15 ½” $261ST1313 13” x 13” 10 ⅛” x 10 ⅛” 12 ¾” x 12 ¾” $220ST1318 13” x 18” 9 ⅝” x 15” 12 ¾” x 17 ½” $264ST1818 18” x 18” 15” x 15” 17 ¾” x 17 ¾” $323


1050ET 50’ Cable $22

Replacement Parts

CODE 19/40

Top Damper, Open

Seal Tight Damper, Closed

Seal Tight Damper, Open

The Top Damper effectively seals in “paid” energy dollars. It mounts to the chimney top and seals with a flat rubber gasket when closed. The Top Damper is constructed of premium stainless steel and cast-aluminum and won’t rust like conventional cast-iron dampers. The control mounts in the firebox for quick and easy access and defaults to the open position. Low Profile design when closed. Lifetime Warranty.

The Seal Tight damper is a low-profile top mounted damper that also serves as a chimney cap. Replaces leaky throat dampers. Easily accessible handle mounts inside of fireplace. Constructed of stainless steel and aluminum so compo-nents will not rust or corrode. Low Profile Design makes these dampers virtually invisible from the ground. Lifetime Warranty.

Damper includes 30’ cable which can be cut to adjust for a perfect fit, fireplace bracket and cool-touch spring handle and mounting adhesive.

Damper includes 30’ of Cable which can be cut for perfect fit, fireplace bracket and cool-touch spring handle and mounting adhesive and hardware.


Item No Model Base Dimensions CFM Fuel Type Retail

101.0299.1200 RS9 11.7” x 11.7” 450 Gas/Oil $1,905 101.0499.1200 RS12 14.3” x 14.3” 950 Gas/Oil $2,249 101.0699.1200 RS14 16.6” x 16.6” 1400 Gas/Oil $2,417 101.0899.1200 RS16 18.8” x 18.8” 1950 Gas/Oil $3,510 102.0299.1200 RSHT009 11.7” x 11.7” 290 Wood/Pellet/Coal $2,190 102.0499.1200 RSHT012 14.3” x 14.3” 550 Wood/Pellet/Coal $2,586 102.0699.1200 RSHT014 16.6” x 16.6” 880 Wood/Pellet/Coal $2,779 102.0899.1200 RSHT016 18.8” x 18.8” 1460 Wood/Pellet/Coal $4,036

Exhausto FansThe RS Chimney Fans are exhaust fans used to maintain proper draft in a gas, oil or solid fuel chimney. Typical applications are fireplaces, BBQ’s, pizza ovens & stoves. Designed for applications where efficient operation, low noise level, low energy consumption, variable speed and compact design are of utmost importance. Can be mounted on masonry or metal chimneys, typically in the vertical position.

CODE 19/35

Includes: Junction Box w/ Cover & Conduit, Fiber Mat & Mounting Brackets, Bird Screen & 5 Amp Fan Speed Control

Fans

Steel Chimney AdapterAdapters are used to provide support for the installation on a round steel chimney. Consists of a square mounting plate and a round collar that can slide into the chimney for a tight fit.


221.0300.2005 5" Adapter $286221.0300.2006 6" Adapter $286221.0300.2008 8" Adapter $236221.0300.2010 10" Adapter $286221.0300.2012 12" Adapter $363

Steel Chimney Adapter

Special Order

For RS9 / RSHT009


221.0300.3006 6" Adapter $266221.0300.3008 8" Adapter $236221.0300.3010 10" Adapter $286221.0300.3012 12" Adapter $363221.0300.3014 14" Adapter $363

For RS12 / RS14 / RSHT012 / RSHT014RS Exhausto Fan


221.0300.4008 8" Adapter $373221.0300.4010 10" Adapter $363221.0300.4012 12" Adapter $363221.0300.4014 14" Adapter $363221.0300.4016 16" Adapter $363221.0300.4018 18" Adapter $363221.0300.4020 20" Adapter $637221.0300.4022 22" Adapter $637221.0300.4024 24" Adapter $637

For RS16 / RSHT016RSHT Exhausto Fan

chases, CAPS & DAMPERS€¦ · BigTop Chimney Cap, Stainless Steel BigTop Chimney Cap, Copper...

Documents

Transcript of chases, CAPS & DAMPERS€¦ · BigTop Chimney Cap, Stainless Steel BigTop Chimney Cap, Copper...