Charter Spectrum TV Install Instructions · Charter Spectrum™ TV Install Instructions Let’s Get...
Transcript of Charter Spectrum TV Install Instructions · Charter Spectrum™ TV Install Instructions Let’s Get...
Charter Spectrum™ TV Install InstructionsLet’s Get Started!
A. Turn on your TV and press using the Charter remote.
B. Press and hold until blinks twice.
C. Press 9, 9, 1 ( will blink twice).
D. Press 1 ( will blink twice).
E. Press and release until your TV turns off* ( will blink each time is pressed).
F. Press and then (if TV does not turn on, press and release until the TV turns on, and then press ).
CH
SET UP
TV
TV
TV
TV
TV CH
POWER
CH
SET UP
* The CH+ key will send a signal to the TV to locate the code that operates your TV.
If you need more remote help or details, please visit www.charter.com/remotes or reference the user guide included with the remote.
2 Sync Your Remote to Your TV
SET UP
Coax ConnectionNote: Not all cables will be used during the installation.
POWERCABLE
IN
ANT/RF/CABLE IN
RF/CABLE OUT
POWERCABLE
IN HDMI
HDMI
1 Connect
Digital Receiver
Power CordCoax Cable
HDMI Connection*Note: Not all cables will be used during the installation.
OR
Television
POWER
For your Standard Definition TV
Component Connection
Note: Once you are set up, if you notice that your picture doesn’t fill the whole screen on most channels, you may wish to turn the HD Auto Tune feature off. Visit charter.com/hdautotune for more information.
A. Please connect any additional digital receivers before proceeding.
B. Confirm that your digital receiver is powered on.
C. Before attempting to activate your digital receiver please leave it powered on and connected to the cable outlet for fifteen minutes.
D. Go online or call to activate: Visit http://activate.charter.net/tv and follow the activation steps that appear on your screen. OR Call 1-877-764-4054 and follow the prompts.
You will need your Charter account number: _________________ and phone number: ______________
3 Activate
Please visit charter.com/selfinstall for additional information regarding your Charter TV Self-Installation including a video tutorial that may assist you in your set up.
For additional information about your equipment, guides and parental controls, please visit charter.com/support.4 Questions?
POWERCABLE
IN
ANT/RF/CABLE IN
RF/CABLE OUT
POWERCABLE
IN HDMI
HDMI
Digital Receiver
Television
Coax Cable Power Cord
Coax Cable
Note: Not all cables will be used during the installation.
For your High Definition TV
With your TV manufacturer’s remote control, change the “input/source” setting on the TV to the proper connection type (HDMI or Component).
*If you do not have an HDMI input available on your TV, use the component cable with 5 color connectors to connect your digital receiver to your TV.
Visit charter.com/tvconnections for additional information and connection diagrams.
Change the input/source setting on the TV to “TV” (or “ANT,” “RF,”
“Cable,” or similar), and tune the TV to channel 3 or 4.
Visit charter.com/tvconnections for additional information and connection diagrams.
Instrucciones de instalación de Charter Spectrum™ TV¡Empecemos!
A. Enciende el televisor y presiona usando el control remoto de Charter.
B. Presiona y suelta hasta que parpadee dos veces.
C. Presiona 9, 9, 1 ( parpadeará dos veces).
D. Presiona 1 ( parpadeará dos veces).
E. Presiona y suelta hasta que se apague el televisor.* ( parpadeará cada vez que se presiona).
F. Presiona y luego (si el televisor no se enciende, presiona y suéltalo hasta que se encienda, luego presiona ).
CH
SET UP
TV
TV
TV
TV
TV CH
POWER
CH
SET UP
* La tecla CH+ enviará una señal al televisor para localizar el código que opera el televisor.
Si necesitas más detalles o ayuda sobre el control remoto, visita www.charter.com/remotes o consulta la guía del usuario que se incluye con el control remoto.
2 Sincroniza el Control Remoto con el Televisor
SET UP
Conexión CoaxialNota: No se utilizarán todos los cables durante la instalación.
ALIMENTACIÓNENTRADADE CABLE
ANT/FR/ENTRADA DEL CABLE
RF/SALIDA DEL CABLE
ALIMENTACIÓNENTRADADE CABLE Interfaz multimedia
de alta definición (HDMI)
Interfaz multimedia de alta definición (HDMI)
1 Conexión
Receptor Digital
Cable de Alimentación
Cable Coaxial
Conexión HDMI*Nota: No se utilizarán todos los cables durante la instalación.
O
Televisión
ALIMENTACIÓN
Para tu Televisor de Definición Estándar
Conexión de Componentes
Nota: Una vez que está hecha la configuración, si observas que la imagen no cubre toda la pantalla en la mayoría de los canales, puedes desactivar la función HD Auto Tune. Visita charter.com/hdautotune para obtener más información.
A. Conecta cualquier receptor digital adicional antes de continuar.
B. Asegúrate de que el receptor digital esté encendido.
C. Antes de intentar activar el receptor digital por favor dejar encendido y conectado la toma de cable durante quince minutos.
D. Llama o conéctate para hacer la activación: Visita http://activate.charter.net/tv y sigue los pasos de activación que aparecen en la pantalla. O Llama al 1-877-764-4054 y sigue las instrucciones.
Necesitarás el número de tu cuenta de Charter:________________ y número de teléfono:________________
3 Activación
Visita charter.com/selfinstall para obtener más información acerca de la autoinstalación de Charter TV, incluido un video tutorial que puede serte útil durante la instalación.
Para obtener más información acerca del equipo, las guías y los controles parentales, visita charter.com/support.4 ¿Tienes Preguntas?
ALIMENTACIÓNENTRADADE CABLE
ANT/FR/ENTRADA DEL CABLE
RF/SALIDA DEL CABLE
ALIMENTACIÓNENTRADADE CABLE Interfaz multimedia
de alta definición (HDMI)
Interfaz multimedia de alta definición (HDMI)
Receptor Digital
Televisión
Cable Coaxial Cable de Alimentación
Cable Coaxial
Nota: No se utilizarán todos los cables durante la instalación.
Para tu Televisor de Alta Definición
Con el control remoto del fabricante, cambia la configuración del televisor
“input/source” (entrada/fuente) al tipo de conexión adecuada (HDMI o Componente).
*Si no tienes entrada HDMI disponible en el televisor, usa el cable componente que tiene 5 conectores de color para conectar el receptor digital al televisor.
Visita charter.com/tvconnections para obtener más información y consultar los diagramas de conexión.
Cambia la configuración input/source del televisor a “TV” (o “ANT”,
“RF”, “Cable” o similar) y sintoniza el televisor en el canal 3 o 4.
Visita charter.com/tvconnections para obtener más información y consultar los diagramas de conexión.