CHAPTER 9 Copyright © 2007 Thomson Delmar Learning 9.1 Water Supply.
CHAPTER 6 Copyright © 2007 Thomson Delmar Learning 6.1 Personal Protective Clothing and Ensembles.
-
Upload
emmeline-robinson -
Category
Documents
-
view
217 -
download
1
Transcript of CHAPTER 6 Copyright © 2007 Thomson Delmar Learning 6.1 Personal Protective Clothing and Ensembles.
CHAPTER
6
6.1
Copyright © 2007 Thomson Delmar Learning
Personal Protective Clothing and Ensembles
CHAPTER
6
6.2
Copyright © 2007 Thomson Delmar Learning
Objectives (1 of 2)
• Describe the role of personal protective equipment (PPE) for firefighters.
• Define the relationship between PPE and national standards and regulations.
• List the components and unique elements of structural, proximity, and wildland PPE ensembles.
CHAPTER
6
6.3
Copyright © 2007 Thomson Delmar Learning
Objectives (2 of 2)
• Describe a serviceability inspection of structural PPE.
• Describe the conditions and damage that render structural PPE unserviceable.
• Given a structural PPE ensemble, appropriately don the ensemble within one minute.
• Demonstrate a team check following PPE donning.
CHAPTER
6
6.4
Copyright © 2007 Thomson Delmar Learning
Introduction (1 of 2)
• Firefighters respond to incidents that are often immediately dangerous to life and death.
• PPE provides minimum protection.• Proper streams, zoning, and sound tactics
provide a greater measure of safety.
CHAPTER
6
6.5
Copyright © 2007 Thomson Delmar Learning
Introduction (2 of 2)
• PPE is the first thing put on and the last thing taken off.
• PPE can take many forms.• Each piece of equipment has limitations.• Most injuries occur when firefighters fail to
properly don or secure PPE.
CHAPTER
6
6.6
Copyright © 2007 Thomson Delmar Learning
Personal Protective Equipment Factors
• Firefighter PPE has evolved significantly.• PPE developed as a result of efforts of labor
groups, membership associations, equipment manufacturers, and government entities.
• NFPA provides the forum for this consensus building process.
CHAPTER
6
6.7
Copyright © 2007 Thomson Delmar Learning
Standards and Regulations• All PPE and equipment worn by a firefighter
should meet current applicable standards. • The federal government, through OSHA, is
involved in PPE use.• EPA, CDCP, ANSI, ASTM, and NIOSH also
are involved with PPE.
CHAPTER
6
6.8
Copyright © 2007 Thomson Delmar Learning
NFPA Compliant PPE
CHAPTER
6
6.9
Copyright © 2007 Thomson Delmar Learning
Types of Personal Protective Equipment
• NFPA has developed standards for:– Structural– Proximity– Wildland
CHAPTER
6
6.10
Copyright © 2007 Thomson Delmar Learning
Structural PPE (1 of 2)
• Commonly referred to as bunkers• Made of three layers: outer shell, vapor
barrier, and thermal barrier– Help meet thermal protective criteria
CHAPTER
6
6.11
Copyright © 2007 Thomson Delmar Learning
Structural PPE (2 of 2)
• Thermal protective performance (TPP) refers to the time a wearer has before a second degree or greater burn will be sustained.– TPP for structural firefighting
coats is 35 seconds.
CHAPTER
6
6.12
Copyright © 2007 Thomson Delmar Learning
Helmets
• Originally designed to shed water and avoid hot embers
• Today – Impact resistant– Provide thermal insulation– Earflaps, chin strap, and face shields/eye
protection
CHAPTER
6
6.13
Copyright © 2007 Thomson Delmar Learning
Gloves
• Gloves are essential in the structural ensemble.
• NFPA standards require that gloves provide thermal protection and protection from cuts and punctures.
CHAPTER
6
6.14
Copyright © 2007 Thomson Delmar Learning
Other Components of Structural PPE
• Firefighting has a growing choice of approved footwear.
• While they must all meet NFPA standards, each type has its advantages and disadvantages.
• Structural protective hoods have a TPP less than that of a structural coat.
Structural Firefighting PPEEnsemble Components
• Helmet • Hood
• Goggles • Radio
• SCBA • Flashlight
• Coat • PASS Device
• Pants • Pocket Tools
• Boots • Gloves
CHAPTER
6
6.15
Copyright © 2007 Thomson Delmar Learning
Personal Protective Equipment
CHAPTER
6
6.16
Copyright © 2007 Thomson Delmar Learning
Proximity Firefighting PPE
• This PPE is most often associated with aircraft rescue and firefighting.
• It must meet more stringent heat reflection and wearer insulation standards.
• Aluminized fabric allows wearer to get closer to fires that emits extreme heat.
• It also features a full-face shield that is coated with an anodized gold material.
CHAPTER
6
6.17
Copyright © 2007 Thomson Delmar Learning
Proximity Suits
CHAPTER
6
6.18
Copyright © 2007 Thomson Delmar Learning
Wildland Firefighting PPE (1 of 2)
• Wildland conditions are unique.– Often outdoors– Require prolonged physical efforts– Working under high ambient temperatures
• It is also known as “brush gear.”
• It’s lightweight and provides breathability, firm ankle support, and hot ember protection.
CHAPTER
6
6.19
Copyright © 2007 Thomson Delmar Learning
Wildland Firefighting PPE (2 of 2)
• Lightweight jacket/shirt and trousers are typically made of a fire-resistive material.
• Lace-up leather boots protect from cuts, snakebites, and burns.
• Fire shelter is another component of wildland PPE.
• Web gear is also essential.
CHAPTER
6
6.20
Copyright © 2007 Thomson Delmar Learning
Wildland PPE
CHAPTER
6
6.21
Copyright © 2007 Thomson Delmar Learning
Wildland Fire Shelter
CHAPTER
6
6.22
Copyright © 2007 Thomson Delmar Learning
Wildland Web Gear
CHAPTER
6
6.23
Copyright © 2007 Thomson Delmar Learning
Miscellaneous PPE Components
• Different forms of eye and hearing protection
• Personal Alert Safety System (PASS)
• Often required to wear a work uniform
• NFPA Standard 1975 – Addresses station/work uniforms for
firefighters.
CHAPTER
6
6.24
Copyright © 2007 Thomson Delmar Learning
PASS Devices
CHAPTER
6
6.25
Copyright © 2007 Thomson Delmar Learning
Care and Maintenance of Personal Protective Equipment (1 of 2)
• NFPA requires all care instructions to be clearly labeled.
• Equipment exposed to biological and chemical contaminants must be decontaminated.
• PPE should be routinely inspected.
CHAPTER
6
6.26
Copyright © 2007 Thomson Delmar Learning
Care and Maintenance of Personal Protective Equipment (2 of 2)
• Manufacturers instructions and information– Safety considerations– Limitations and use procedures– Marking recommendations and restrictions– Warranty information– Sizing/adjustment procedures– Recommended storage practices– Inspection frequency and details– Donning and doffing procedures
CHAPTER
6
6.27
Copyright © 2007 Thomson Delmar Learning
PPE Effectiveness: “Street Smarts”
• PPE is only effective if it is worn properly.
• Good PPE habits and a positive attitude can minimize injuries.
• Taking shortcuts with PPE can lead to injury.
• Good habits include fast and proper donning of appropriate PPE.
CHAPTER
6
6.28
Copyright © 2007 Thomson Delmar Learning
PPE Street Smart Suggestions
• Keep PPE clean.
• Practice team checks.
• Position PPE for rapid donning.
• Always use prudent judgment.
• PPE includes flashlight, tool, radio, earplugs, eye protection, accountability tag, and a partner.
• Practice proper donning and doffing.
• Stay hydrated when wearing PPE.
CHAPTER
6
6.29
Copyright © 2007 Thomson Delmar Learning
Donning PPE
CHAPTER
6
6.30
Copyright © 2007 Thomson Delmar Learning
Summary
• PPE should always be used during any firefighting operation.
• Proper tactics and procedures provide safety.• Standards and regulations have been
established for safety and effectiveness of PPE.• Various types of PPE are used based on the
type of firefighting.• PPE must be cared for properly.