Chapter 5 Drilling Techniques and Drilling Problems
-
Upload
nell-savage -
Category
Documents
-
view
111 -
download
12
description
Transcript of Chapter 5 Drilling Techniques and Drilling Problems
![Page 1: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/1.jpg)
Chapter 5
Drilling Techniques and Drilling Problems
![Page 2: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/2.jpg)
Part 1 Drilling Techniques
![Page 3: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/3.jpg)
Well deviates < 3 deg. per 100 ft (30m)
Cone with a maximum angle of 5 deg
Straight hole
![Page 4: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/4.jpg)
If the bit hits a subsurface rock layer with a dip greater than 45 deg., the bit tends to be deflected down dip. If rock layer dip less than 45 deg., the bit tends to be deflected updip.
A well with an excessive angle in it that has not been drilled on purpose that way is call a crooked hole.
![Page 5: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/5.jpg)
Modern rotary rigs can be controlled so that the well is drilled out at a pre-determined angle during directional or deviation drilling and ends up in a pre-determined location called target.
Directional Drilling or Deviation Drilling
![Page 6: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/6.jpg)
Directional Drilling (Patterns) Directionally drilled wells will usually be
drilled according to one of three basic hole patterns.
![Page 7: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/7.jpg)
Directional Drilling (Patterns) After making an initial deflection from
vertical, the well may be drilled to the target, or deflected once more to allowed the bottom of the
hole to be drilled
vertically
(“double dogleg”).
![Page 8: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/8.jpg)
起斜點 (Kick off point, KOP)
![Page 9: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/9.jpg)
Uses of Directional Drilling
![Page 10: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/10.jpg)
Situation Requiring Directional Drilling
側井改正井
![Page 11: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/11.jpg)
![Page 12: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/12.jpg)
Directional Drilling
The deviation begins when the hole is deflected using one of several techniques:
(1) downhole hydraulic motors with a
“bent sub” ( 井底馬達 與 彎曲接頭 ) (2) jet bits ( 沖鑽頭 ) (3) whipstocks ( 導斜具 )
![Page 13: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/13.jpg)
Downhole hydraulic motors with a “bent
sub”
![Page 14: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/14.jpg)
![Page 15: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/15.jpg)
Device used to kick off a well
![Page 16: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/16.jpg)
Jet bit
![Page 17: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/17.jpg)
Jet bit
![Page 18: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/18.jpg)
WhipstockWhipstock
![Page 19: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/19.jpg)
WhipstockWhipstock
![Page 20: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/20.jpg)
A steerable downhole assembly ( 可控式井下總承 ) is a combination of stabilizers, bent subs, downhole turbine motor, and diamond bit that can maintain, drop, or build angle.
![Page 21: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/21.jpg)
Plot of well survey data showing paths of directionally drilled wells
![Page 22: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/22.jpg)
Depth of a Well
![Page 23: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/23.jpg)
Extended Reach Well and Horizontal Drain Well
![Page 24: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/24.jpg)
![Page 25: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/25.jpg)
Part 2 Drilling Problems
![Page 26: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/26.jpg)
Problems while drilling
Fishing 打撈 Stuck pipe 卡鑽 Sloughing shale 頁岩崩落 Lost circulation 喪失循環 Formation damage 地層損傷 Corrosive gases 腐蝕性氣體 Abnormal high pressure 異常高壓
![Page 27: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/27.jpg)
Comment situations requiring fishing jobs
Differential sticking 差壓黏卡 Key seating 匙孔卡鑽 Sloughing shale 頁岩崩落(泥坑) Poor mud properties 鑽屑停滯或糊鑽 Fatigue failures 金屬疲勞破壞 Foreign objects 外來的掉落物件
![Page 28: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/28.jpg)
Differential sticking of drillpipe because of heavy mud weight
![Page 29: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/29.jpg)
Crooked wellbore showing view of “key
seated” drillpipe
![Page 30: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/30.jpg)
![Page 31: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/31.jpg)
Equipment used for a fishing job
For stuck drillpipe (卡鑽) Overshot 打撈碗 Spear 打撈矛
For foreign objects (掉落物) Junk baskets 打撈籃
![Page 32: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/32.jpg)
Two types of catching tools
![Page 33: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/33.jpg)
Three types of junk baskets for retrieving foreign objects from hole
![Page 34: Chapter 5 Drilling Techniques and Drilling Problems](https://reader033.fdocuments.net/reader033/viewer/2022061616/568135d2550346895d9d3897/html5/thumbnails/34.jpg)
End of this chapter