Chap 03 underlying technology
-
Upload
noctorous-jamal -
Category
Engineering
-
view
52 -
download
3
description
Transcript of Chap 03 underlying technology
TCP/IP Protocol Suite 1
Chapter 3Chapter 3
Objectives Upon completion you will be able to:
Underlying TechnologyUnderlying Technology
• Understand the different versions of wired Ethernet• Understand wireless Ethernet• Understand the types of point-to-point WANs• Understand the types of switched WANs, especially ATM• Differentiate between repeaters, bridges, routers, and hubs
TCP/IP Protocol Suite 2
Figure 3.1 Internet model
TCP/IP Protocol Suite 3
3.1 Local Area Networks
A A local area network (LAN)local area network (LAN) is a data communication system that allows is a data communication system that allows a number of independent devices to communicate directly with each a number of independent devices to communicate directly with each other in a limited geographic area such as a single department, a single other in a limited geographic area such as a single department, a single building, or a campus. A large organization may need several connected building, or a campus. A large organization may need several connected LANs.The most popular LANs are Ethernet and wireless LANs. We LANs.The most popular LANs are Ethernet and wireless LANs. We briefly review these technologies in this section. briefly review these technologies in this section.
The topics discussed in this section include:The topics discussed in this section include:
Wired LANs: Ethernet Wired LANs: Ethernet Wireless LANs: IEEE 802.11Wireless LANs: IEEE 802.11
TCP/IP Protocol Suite 4
Figure 3.2 CSMA/CD
TCP/IP Protocol Suite 5
Figure 3.3 Ethernet layers
TCP/IP Protocol Suite 6
Figure 3.4 Ethernet frame
TCP/IP Protocol Suite 7
Figure 3.5 Ethernet implementations
TCP/IP Protocol Suite 8
Figure 3.6 Fast Ethernet implementations
TCP/IP Protocol Suite 9
Figure 3.7 Gigabit Ethernet implementations
TCP/IP Protocol Suite 10
Figure 3.8 BSSs
TCP/IP Protocol Suite 11
Figure 3.9 ESS
TCP/IP Protocol Suite 12
Figure 3.10 Physical layer
TCP/IP Protocol Suite 13
Figure 3.11 FHSS
TCP/IP Protocol Suite 14
Figure 3.12 DSSS
TCP/IP Protocol Suite 15
Figure 3.13 MAC layers in IEEE 802.11 standard
TCP/IP Protocol Suite 16
Figure 3.14 CSMA/CA
TCP/IP Protocol Suite 17
Figure 3.15 Frame
TCP/IP Protocol Suite 18
Table 3.1 Table 3.1 Addresses in IEEE 802.11Addresses in IEEE 802.11
TCP/IP Protocol Suite 19
3.2 Point-to-Point WANs
A second type of network we encounter in the Internet is the point-to-A second type of network we encounter in the Internet is the point-to-point wide area network. A point wide area network. A point-to-point WANpoint-to-point WAN connects two remote connects two remote devices using a line available from a public network such as a telephone devices using a line available from a public network such as a telephone network. We discuss the physical and data link layers of these network. We discuss the physical and data link layers of these technologies here..technologies here..
The topics discussed in this section include:The topics discussed in this section include:
Physical LayerPhysical LayerData Link LayerData Link Layer
TCP/IP Protocol Suite 20
Figure 3.16 56K modem
TCP/IP Protocol Suite 21
ADSL is an asymmetric communication technology designed for residential users;
it is not suitable for businesses.
Note:Note:
TCP/IP Protocol Suite 22
Figure 3.17 Bandwidth division
TCP/IP Protocol Suite 23
Figure 3.18 ADSL and DSLAM
TCP/IP Protocol Suite 24
Figure 3.19 Cable bandwidth
TCP/IP Protocol Suite 25
Figure 3.20 Cable modem configurations
TCP/IP Protocol Suite 26
Table 3.2 Table 3.2 T line ratesT line rates
TCP/IP Protocol Suite 27
Table 3.3 Table 3.3 SONET ratesSONET rates
TCP/IP Protocol Suite 28
Figure 3.21 PPP frame
TCP/IP Protocol Suite 29
3.3 Switched WANs
The backbone networks in the Internet are usually switched WANs. A The backbone networks in the Internet are usually switched WANs. A switched WANswitched WAN is a wide area network that covers a large area (a state or is a wide area network that covers a large area (a state or a country) and provides access at several points to the users. Inside the a country) and provides access at several points to the users. Inside the network, there is a mesh of point-to-point networks that connects network, there is a mesh of point-to-point networks that connects switches. The switches, multiple port connectors, allow the connection of switches. The switches, multiple port connectors, allow the connection of several inputs and outputs. several inputs and outputs.
The topics discussed in this section include:The topics discussed in this section include:
X.25X.25Frame RelayFrame RelayATMATM
TCP/IP Protocol Suite 30
Figure 3.22 Frame Relay network
TCP/IP Protocol Suite 31
A cell network uses the cell as the basic A cell network uses the cell as the basic unit of data exchange. A cell is defined as a unit of data exchange. A cell is defined as a
small, fixed-size block of information.small, fixed-size block of information.
Note:Note:
TCP/IP Protocol Suite 32
Figure 3.23 ATM multiplexing
TCP/IP Protocol Suite 33
Figure 3.24 Architecture of an ATM network
TCP/IP Protocol Suite 34
Figure 3.25 Virtual circuits
TCP/IP Protocol Suite 35
Note that a virtual connection is defined by Note that a virtual connection is defined by a pair of numbers: a pair of numbers:
the the VPIVPI and the and the VCIVCI..
Note:Note:
TCP/IP Protocol Suite 36
Figure 3.26 An ATM cell
TCP/IP Protocol Suite 37
Figure 3.27 ATM layers
TCP/IP Protocol Suite 38
The IP protocol uses the The IP protocol uses the AAL5AAL5 sublayer. sublayer.
Note:Note:
TCP/IP Protocol Suite 39
We will discuss IP over ATM in Chapter 23.
Note:Note:
TCP/IP Protocol Suite 40
3.4 Connecting Devices
LANs or WANs do not normally operate in isolation. They are connected LANs or WANs do not normally operate in isolation. They are connected to one another or to the Internet. To connect LANs or WANs, we use to one another or to the Internet. To connect LANs or WANs, we use connecting devicesconnecting devices. Connecting devices can operate in different layers of . Connecting devices can operate in different layers of the Internet model. We discuss three kinds of connecting devices: the Internet model. We discuss three kinds of connecting devices: repeaters (or hubs),repeaters (or hubs), bridges (or two-layer switches),bridges (or two-layer switches), and and routers (or routers (or three-layer switchesthree-layer switches). Repeaters and hubs operate in the first layer of the ). Repeaters and hubs operate in the first layer of the Internet model. Bridges and two-layer switches operate in the first two Internet model. Bridges and two-layer switches operate in the first two layers. Routers and three-layer switches operate in the first three layerslayers. Routers and three-layer switches operate in the first three layers
The topics discussed in this section include:The topics discussed in this section include:
RepeatersRepeatersHubsHubsBridgesBridgesRouterRouter
TCP/IP Protocol Suite 41
Figure 3.28 Connecting devices
TCP/IP Protocol Suite 42
Figure 3.29 Repeater
TCP/IP Protocol Suite 43
A repeater connects segments of a LAN.A repeater connects segments of a LAN.
Note:Note:
TCP/IP Protocol Suite 44
A repeater forwards every bit; A repeater forwards every bit; it has no filtering capability.it has no filtering capability.
Note:Note:
TCP/IP Protocol Suite 45
A repeater is a regenerator, not an amplifier.
Note:Note:
TCP/IP Protocol Suite 46
Figure 3.30 Function of a repeater
TCP/IP Protocol Suite 47
A bridge has a table used in filtering decisions.
Note:Note:
TCP/IP Protocol Suite 48
Figure 3.31 Bridge
TCP/IP Protocol Suite 49
A bridge does not change the physical (MAC) addresses in a frame.
Note:Note:
TCP/IP Protocol Suite 50
Figure 3.32 Learning bridge
TCP/IP Protocol Suite 51
A router is a three-layer (physical, data link, and network)
device.
Note:Note:
TCP/IP Protocol Suite 52
A repeater or a bridge connects segments of A repeater or a bridge connects segments of a LAN.a LAN.
A router connects independent LANs or A router connects independent LANs or WANs to create an internetwork (internet).WANs to create an internetwork (internet).
Note:Note:
TCP/IP Protocol Suite 53
Figure 3.33 Routing example
TCP/IP Protocol Suite 54
A router changes the physical addressesin a packet.
Note:Note: