CHANNEL - GT Bicycles · GT logo on seat tube FORK b GT Dirt/Street Design, 100% Cr-Mo, 1-1/8"...
1
Retailer Service: 1-800-726-BIKE (2453) • Retailer Fax: 1-800-429-8464 • www.gtbicycles.com • All prices and specifications subject to change without notice. Orders subject to approval at our Bethel, CT headquarters. • © Cycling Sports Group, Inc. • V2 04/12 COLOR(S) x Tranny Gold SIZES w 20" wheel / 21" top tube FRAME a 2013 GT Team Design, Sanko butted 100% Cr-Mo w/ internal DT Gussett, Hour Glass MID BB, 3D dropouts with integrated axle adj., Seat Stay Mounted U-Brake, Full Removable Brake Hardware and Rotor Guides, integrated 1-1/8" H/T, GT logo on seat tube FORK b GT Dirt/Street Design, 100% Cr-Mo, 1-1/8" Steerer With Internal Thread in Top Cap, 31.8- 28.6mm Tapered O.D. Blades, 3/8" axle CRANK i GT Heat Treated Cr-Mo tubular 2 Piece Welded Drive Side Cr-Mo 175mm Arms, 19mm x 48T Spline press fit Spinde, 25T GT CNC AL 6.35M CNC Chain Wheel BOTTOM BRACKET l MID Sealed Bearing PEDALS h GT Low Profile Large Platform Design, AL Body w/ Replacable Pins, Cr-Mo Axle FREEWHEEL k 9T One Piece Driver CHAIN j KMC HL710 Half-Link Design RIMS d Alienation Deviant, Double Wall, 32 Hole F, Alienation 440 Double Wall, 36 Hole R TIRES g Tioga Street Block 60 TPI 2.3" F/R HUBS e (F) GT Alloy Mohawk Design, Low Flange 32F/ 36R Hole Hub Body Front and Rear, Sealed Bearings with 3/8" Hollow Cr-Mo Axle with Cr-Mo Thread in Hex Bolts Front, 14mm x 165mm Cr-Mo Hollow Axle, 9T One Pcs Driver Cassette Rear, 7075 AL Axle Nuts Rear SPOKES f 14g NIPPLES f 14g BRAKES s Tektro FX-720, Coil Spring, Cold Forgd Alloy U-Brake, Soft Grey Compound Pads BRAKE LEVERS t Tektro XL750 2 Finger, Forged Lever and Hinged Clamp For U-Brake HANDLEBAR p GT 100% Cr-Mo, 690mm Width, 210mm Rise, 11 Degree Sweep, 3 Degree Tip, Taper Cross Bar STEM q GT 100% Cold Forged 1-1/8" Machined GT Logo On Front Cap, 50mm Ext GRIPS 4 GT Wings Logo 130mm Single Compound HEADSET r 1-1/8" Integrated SADDLE u GT Street Design Unifed Padded Saddle w/ Post SEAT POST v Integrated With Saddle, 135mm SEAT CLAMP 5 Integrated with frame EXTRAS z 1Pr. GT 34mm OD x 95mm Heat Treated Cr-Mo Axle Pegs STREET CHANNEL
Transcript of CHANNEL - GT Bicycles · GT logo on seat tube FORK b GT Dirt/Street Design, 100% Cr-Mo, 1-1/8"...
Retailer Service: 1-800-726-BIKE (2453) • Retailer Fax: 1-800-429-8464 • www.gtbicycles.com • All prices and specifications subject to change without notice.Orders subject to approval at our Bethel, CT headquarters. • © Cycling Sports Group, Inc. • V2 04/12
COLOR(S) x Tranny Gold
SIZES w 20" wheel / 21" top tube
FRAME a 2013 GT Team Design, Sanko butted 100% Cr-Mo w/ internal DT Gussett, Hour Glass MID BB, 3D dropouts with integrated axle adj., Seat Stay Mounted U-Brake, Full Removable Brake Hardware and Rotor Guides, integrated 1-1/8" H/T, GT logo on seat tube
FORK b GT Dirt/Street Design, 100% Cr-Mo, 1-1/8" Steerer With Internal Thread in Top Cap, 31.8- 28.6mm Tapered O.D. Blades, 3/8" axle
CRANK i GT Heat Treated Cr-Mo tubular 2 Piece Welded Drive Side Cr-Mo 175mm Arms, 19mm x 48T Spline press fit Spinde, 25T GT CNC AL 6.35M CNC Chain Wheel
BOTTOM BRACKET l MID Sealed Bearing PEDALS h GT Low Profile Large Platform Design, AL Body w/ Replacable Pins, Cr-Mo AxleFREEWHEEL k 9T One Piece DriverCHAIN j KMC HL710 Half-Link Design
RIMS d Alienation Deviant, Double Wall, 32 Hole F, Alienation 440 Double Wall, 36 Hole R
TIRES g Tioga Street Block 60 TPI 2.3" F/R
HUBS e (F) GT Alloy Mohawk Design, Low Flange 32F/ 36R Hole Hub Body Front and Rear, Sealed Bearings with 3/8" Hollow Cr-Mo Axle with Cr-Mo Thread in Hex Bolts Front, 14mm x 165mm Cr-Mo Hollow Axle, 9T One Pcs Driver Cassette Rear, 7075 AL Axle Nuts Rear
SPOKES f 14gNIPPLES f 14g
BRAKES s Tektro FX-720, Coil Spring, Cold Forgd Alloy U-Brake, Soft Grey Compound Pads
BRAKE LEVERS t Tektro XL750 2 Finger, Forged Lever and Hinged Clamp For U-Brake
HANDLEBAR p GT 100% Cr-Mo, 690mm Width, 210mm Rise, 11 Degree Sweep, 3 Degree Tip, Taper Cross Bar
STEM q GT 100% Cold Forged 1-1/8" Machined GT Logo On Front Cap, 50mm Ext
GRIPS 4 GT Wings Logo 130mm Single Compound
HEADSET r 1-1/8" Integrated
SADDLE u GT Street Design Unifed Padded Saddle w/ Post
SEAT POST v Integrated With Saddle, 135mm
SEAT CLAMP 5 Integrated with frame
EXTRAS z 1Pr. GT 34mm OD x 95mm Heat Treated Cr-Mo Axle Pegs
STREET
CHANNEL
