Chandler, Anthony - resume
2
Anthony D. Chandler 200 Booker Street – Marion, Alabama 36756 205-218-3247 – [email protected] OBJECTIVE To seek a position in fabrication where I can prove my expertise and vast experience gained in this area. EXPERIENCE Production Supervisor, U.S. Pipe, Bessemer, Alabama — April, 2010-May, 2015 • Managed and mentored in production process activities • Managed efficiency and customer’s specifications in the processing department • Performed various duties in Melt Department • Specialized in refractory work Manual Packer, Vulcan Threaded Products, Inc., Pelham, Alabama — July, 2009-April, 2010 • Executed assigned projects for customers’ specifications • Prepared and compiled data using computers, scanners and barcodes • Set up and operated auto-packing machine • Developed practical and innovative ways to identify and meet goals • Used effective time management and prioritization abilities Press Brake Operator, Bushhog, LCC, Selma, Alabama — August, 2001-July, 2009 • Set up and operated press brake using blueprints and Windows 95 program • Cross trained to run shear, auto cut saws and primary press • Used and understood dial calibers, read blueprints, angle protractors and tape measure • Operated an industrial crane and a variety of hand and power tools • Minor CNC training Fabrication Supervisor, Alabama Diecast, Greensboro, Alabama — March, 2001-August, 2001 • Planned and supervised fabrication shop • Supervised workers directly or through subordinate supervisors • Responsible for quality assurance/control of production • Reviewed payroll for accuracy • Supervised and managed shipping department • Performed minor body and mechanical repairs • Inspected equipment for safety and mechanical defects Quality Control Technician, CT South, Marion, Alabama — July, 1995-January, 2000 • Checked and documented errors in parts • QS 9000 certified • Traveled to other locations to perform quality resolutions • Read blueprints and schematics • Drew sketches to fabricate equipment and tools
-
Upload
anthony-chandler -
Category
Documents
-
view
130 -
download
1
Transcript of Chandler, Anthony - resume
Anthony D. Chandler200 Booker Street – Marion, Alabama 36756
205-218-3247 – [email protected]
OBJECTIVETo seek a position in fabrication where I can prove my expertise and vast experience gained in this area.
EXPERIENCEProduction Supervisor, U.S. Pipe, Bessemer, Alabama — April, 2010-May, 2015• Managed and mentored in production process activities • Managed efficiency and customer’s specifications in the processing department • Performed various duties in Melt Department• Specialized in refractory work
Manual Packer, Vulcan Threaded Products, Inc., Pelham, Alabama — July, 2009-April, 2010• Executed assigned projects for customers’ specifications• Prepared and compiled data using computers, scanners and barcodes• Set up and operated auto-packing machine• Developed practical and innovative ways to identify and meet goals• Used effective time management and prioritization abilities
Press Brake Operator, Bushhog, LCC, Selma, Alabama — August, 2001-July, 2009• Set up and operated press brake using blueprints and Windows 95 program• Cross trained to run shear, auto cut saws and primary press• Used and understood dial calibers, read blueprints, angle protractors and tape measure• Operated an industrial crane and a variety of hand and power tools• Minor CNC training
Fabrication Supervisor, Alabama Diecast, Greensboro, Alabama — March, 2001-August, 2001• Planned and supervised fabrication shop• Supervised workers directly or through subordinate supervisors• Responsible for quality assurance/control of production• Reviewed payroll for accuracy• Supervised and managed shipping department• Performed minor body and mechanical repairs• Inspected equipment for safety and mechanical defects
Quality Control Technician, CT South, Marion, Alabama — July, 1995-January, 2000• Checked and documented errors in parts• QS 9000 certified• Traveled to other locations to perform quality resolutions• Read blueprints and schematics• Drew sketches to fabricate equipment and tools
EDUCATIONAIDT Certified Leader I with a LSI Score of 90, Leadership Development CourseAIDT ISO 9001-2008, Birmingham, Alabama — April 22, 2015
Manufacturing Skills-Gold Level and 10 Hour OSHA Training Course, Work Keys Silver LevelEast Mississippi Community College — March, 2009-May, 2009
ACHIEVEMENTS• Gold Certification for Manufacturing Skills, East Mississippi Community College• Double-Certified for Lean Manufacturing Skills, Auburn University• Fred Pryor Seminars First-Time Supervisor Certification• Accupress Certification, Bush Hog LLC• Work Keys Certification – Reading for Information, Locating Information and Applied Math
References available upon request.
Anthony D. Chandler200 Booker Street – Marion, Alabama 36756
205-218-3247 – [email protected]
page two
