Chandigarh Fire Ann
-
Upload
dilshad-ahemad -
Category
Documents
-
view
55 -
download
0
Transcript of Chandigarh Fire Ann
BILL OF QUANTITIES ( FIRE FIGHTING SYSTEM ) FOR CONSTRUCTION OF ZONAL
OFFICE BUILDING FOR BANK OF INDIA AT SECTOR 31-A, CHANDIGARH
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
A) FIRE, HYDRANT SYSTEM
NOTE :- A Rates quoted shall be
inclusive of all structural supports, and
clamps as per approved design.
1 Providing and fixing black steel pipes to
IS 1239/3589 heavy class including all
fittings like anchor fasteners, couplings,
bends, elbows, tees, flanges, etc.,
welding as required painting with one
coat of red-oxide primer and two or
more coats of synthetic enamel paints to
give an even shade, cutting holes and
chases in brick or RCC walls and
making good complete.
A 200 mm dia. Meter 10
B 150 mm dia. Meter 198
C 100 mm dia. Meter 60
D 80 mm dia. Meter 40
E 25 mm dia.
Meter 15
2 Providing and fixing cast iron sluice
valves with epoxy coated disc, carbon
steel shaft and lever actuator tested to 10
Kg-/cm 2.
A 200 mm dia Each 2
B 150 mm dia 5
3 Providing and fixing cast iron butterfly
valves with epoxy coated disc, carbon
steel shaft and lever actuator tested to 16
Kg-/cm 2.
A 100 mm dia Each 3
B 80 mm dia Each 2
4
Providing and fixing cast iron double
flanged horizontal type non return valves including nuts, bolts, 1.5 mm
thick compressed asbestos gasket
complete.
A 150 mm dia Each 3
B 100 mm dia Each 2
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
2
5 Supply, Installation, Testing &
Commissioning Of :-
Single headed, Gun-metal ISI marked
oblique pattern hydrant landing valve
with 80 mm dia flanged inlet and 63
mm dia instantaneous type female outlet
complete with gunmetal cap and G.I.
chain, twist release type plug and all
accessories as per 13:5290-1983 (Type
'A')
Each 17
6 First-Aid Fire Hose Reel wall
mounting swinging type complete with
drum, bracket, 25 mm dia. ball valve
and 20 mm dia.x 36M long high
pressure Hose Reel tubing as per IS:444
& ISI marked with Gunmetal shut-off
nozzle having 5mm dia. orifice.
The Hose Reel shall strictly
confirm to IS : 884-1985.
Each 17
7 Non-percolating flexible hose (RRL
type-'A') ISI marked (IS:636) 63 mm dia
x 15 M long complete with
instantaneous type gunmetal 63 mm
dia. IS marked Male and female
couplings (IS:903) bound and riveted to
hose pipe with copper rivets and 1.5 mm
copper wire.
Each 34
8 Gun-metal 63mm dia short size branch
pipes with 20 mm dia nozzles with
63mm instantaneous coupling ISI
marked (IS: 903).
Each 17
9 Providing and fixing fire hose cabinet
fabricated from 16 gauge MS sheet of
fully welded construction with flanged
double front door with locking
arrangements and partially glazed with 4
mm thick glass, stove enameled fire red
finish with fire hose written on front
suitable to house , 2 x 1 5 m canvas hose
with couplings, one branch pipe ,one
fire man's axe and First aid hose reel
size 760 x 1,500x 600 (for internal
hydrants) and design to be approved by engineer in charge.
Each 15
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
3
10 Providing and fixing fire hose cabinet
fabricated from 16 gauge MS anodised
aluminium sheet with single or double
glazed front door and locking
arrangements, painted "FIRE HOSE"
written on front including necessary
supports approximate size 750 mm x
600 mm x 300 mm deep. Design to be
approved by engineer in charge. (for
external hydrants).
Each 2
11 Providing and fixing 100mm dia two-
way fire brigade inlet connection
consisting of 63mm size
instantaneously make coupling and
shall be protected by cap scored with a
chain glass bore etc. complete with
one 100mm dia sluice valve and
100mm dia non-return valve (To be
connected to main ring, main/wet riser/sprinkler riser) ( IS 904- 19765).
Each 1
12 Providing and fixing Gunmetal four way
collecting head with 63 mm dia.
Instantaneous type inlet with built in
check valve and 150mm dia flanged
outlet complete with bolts, nuts and
rubber insertions for fire brigade
connection to underground tanks. (IS
904 –1965).
Each 1
13 Providing and fixing Gun-metal Fire
Brigade Suction Hose coupling
(Draw-out Connection) with nut for
female coupling as per IS:902- 1974
complete with 100 mm dia. G.I. Suction
pipe and 100 mm dia. 1No. C.I. Foot
valve flanged (to be connected to static
water tank).
Each 1
14 Providing and fixing M.S. cabinet
fabricated from 16 g sheet with full
front glass door and locking
arrangement duly painted with one coat
of primer and two or more coats of
synthetic enamel paint of approved
make and shade and suitably mounted
on a raised masonry platform as required (Approx.0.6mx0.6Mx0.45M).
(FB Draw-out/ inlet connections)
Each 3
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
4
15 Providing and fixing standard fireman’s
axe with heavy insulated rubber handle
(20,000 volts).
Each 15
16 Providing and fixing suction strainer
with MS flanged connections 1000 mm
long fabricated from 16 gauge brass
sheet with 3 mm slots.
A 200 mm dia Each 2
B 100 mm dia Each 1
17 Providing and fixing air cushion tank
comprising of single acting heavy duty
spring type brass air valve screwed to -
300 mm dia and 900 mm long tank with
dished ends, ball valves including
painting both sides with zinc chromate primer complete.
Each 1
18 Providing and fixing CO2 type
extinguishers with cylinder fully
charged of the capacity of 4.5 Kg
complete with backlite horn, discharge
tube C.I. bracket for wall mounting etc., conforming to ISS 2876 or 2878.
Each 15
19 Providing and fixing Portable Chemical
Water (gas pressure) type fire
extinguishers with cylinder fully
charged of the of 9 ltrs. Complete with
backlit horn descharge type, CI bracket
for wall mounting etc., confirming to
relevant IS.
Each 15
20 Providing and fixing mechanical foam
type fire extinguishers with cylinder
fully charged of the capacity of 9 Kg complete with backlit horn, discharge
type Cal brackets for wall mounting etc.,
conforming to relevant IS.
Each 6
21 Providing and fixing 'ABC' stored
pressure type Dry Chemical Powder
(Mono-Ammonium Phosphate ) fire extinguisher with fixing hangers, hose,
brackets, screws to required size etc.,
complete as per IS:14609.
Each 8
TOTAL
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
5
B) SPRINKLER SYSTEM
NOTE :- A Rates quoted shall be
inclusive of all structural supports, and
clamps as per approved design.
1 Providing and fixing black steel pipe to
IS 1239 heavy class complete with M.S.
fittings like couplings, bends, Tees,
flanges, etc., painting with one coat of
red Oxide primer two or more coats of
synthetic enamel paint to give an even
shade of clamps, anchor fasteners,
including cutting and making good the
walls, etc.
A 150 mm dia. Meter 15
B 100 mm dia. Meter 8
C 80 mm dia. Meter 8
D 65 mm dia. Meter 8
E 50 mm dia. Meter 8
F 40 mm dia. Meter 18
G 32 mm dia. Meter 30
H 25 mm dia.
Meter 50
2 Providing and fixing 15 mm dia.
pendent type chromium plated brass
sprinkler head with quartzoid bulb and
set to operate at 68 deg.C
Each 72
3 Providing and fixing. Control Valve
assembly comprising of vertical wet
alarm valve, including the cost of 150
mm dia butterfly valve, hydraulic alarm
motor & gong, 15 mm dia. Test valve,
50 mm dia. Drain valve and all
necessary trimming connections
including 2 nos. pressure gauges as per
manufacturer 's catalogue
A 150 min dia.
Each 1
4 Providing and fixing M.S. cabinet
fabricated from 16 GMS sheet with full
front glass door and locking
arrangement With suitable shelves for
keeping 25 spare sprinklers and one
spanner properly fixed in the shelves
and cabinet painted fire red with stove
enameled of approved shade size 900 x
600 x 150 mm.
Each 1
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
6
5 Providing and fixing electrically
operated flow indicating switches with
threaded connection for a minimum
flow of 90 lpm for indicating water
flow in sprinkler branch line with
necessary junction box installed in
accessible place including 1.5 mm thick
compressed asbestos gasket, nuts and
bolts, nuts, complete. (wiring from
switches to panel not included)
Each 2
6 Providing and fixing double flanged cast
iron sluice valve class I with Wheel
Complete with bolts, nuts, 3 mm thick
rubber insertion complete conforming to
IS 780.
A 150 mm dia Each 1
B 100 mm dia. Each 1
7 Providing and fixing standard dial type
pressure gauge with screwed inlet with
isolation cock suitable for liquid gauge
to show pressure upto 20 kg/sqcm.
Each 2
8
Providing and fixing Ball valve with
hard chrome plated ball inside PTFE
(Teflon) seat & ring with chrome plated
centre handle with female BSP threads
complete: in all respects.
A 50 mm dia.
Each 3
9 Providing and laying 2 core 1.5 sqmm
control cable between flow switches and
panel.
Meter 100
10 Providing and installing 16 gauge 20
mm dia MS conduit on surface or
concealed in wall, false ceiling
including cutting chasing making good
the same as directed with junction
boxes, bends, saddles and other
accessories as required with red enamel
paint for identification.
Meter 50
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
7
11 Providing and fixing Sprinkler
Annunciation Panel for minimum 8
Zones (6 working + 2 standby) zones
spare, compatible for seamless
integration with water flow devices with
visual display for all zones, complete
with internal sounder, alarm/fault
indications & standby 24v lead acid
batteries with charger.
(Note : The panel shall be located in the
Fire control room and connected to flow
indicating switches in sprinkler system).
Each 1
TOTAL
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
8
C) FIRE DETECTION SYSTEM
1 Supplying, fixing testing &
commissioning dual chamber optical
smoke detector with LED.
Each 151
2 Supplying, fixing testing &
commissioning Temp-cum-Rate of rise
type heat detectors.
Each 7
3 Supplying, fixing testing &
commissioning flush type response
indicator with red coloured LED lamp.
Each 38
4 Supplying, fixing testing &
commissioning manual break glass units
alongwith chain & hammer.
Each 14
5 Supplying, fixing testing &
commissioning dual tone type
electronics hooter suitable for fire and
fault signaling and public address
system.
Each 14
6 Supplying, fixing testing &
commissioning 10 zone Main Control
Panel with zone indication, 60 watt
Amplifier for public address system-
selector for individual zone as well as
whole complex. ( No of zones and other
details as shown on drawings.) The
operating voltage shall be 24V D.C. &
shall include solid state circuits, battery
charger, batteries, 60 watt amplifier etc.
and fire/ fault/ test positions selector
switches, zone isolation facility etc.
complete.
Each 1
7 Supplying, fixing testing &
commissioning PVC insulated 2 x1.5
Sq.mm copper conductor wires laid in
20mm dia 16 SWG concealed MS
conduit with all necessary conduit
accessories etc.
Mtr 2000
8. Supplying, fixing testing &
commissioning ‘EXIT’ Sign Board .
Each 14
TOTAL
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
9
D) PUMPS AND ACCESSORIES
a Work under this section to be carried
out by specialist contractor only.
b The motor HP to be confirmed by the
supplier for the duty mentioned for each
pump.
c Rates quoted shall be in inclusive of all
structural supports and clamps as per
approved design.
1 Electrical Motor Driven Fire Pumping
set suitable for automatic operation
consisting of the following as per the
specifications:
i Horizontally mounted, centrifugal type
single / multi stage fire pump having
cast iron body, bronze impeller,
stainless steel complete with necessary
pot strainer / Y Type on the suction side and pressure gauge with GM cocks on
the delivery side including bypass
arrangement (with 50 valve and upto
5M M.S. Heavy Duty pipes) for
periodical testing of the working of the
testing of the working of the pumping set as per TAC rules.
ii Squirrel cage induction motor totally
enclosed fan cooled type suitable for
415 Volts + 10% - 15% , 3 phase, 50
HZ A.C. supply of suitable capacity.
The pump coupled with flexible
coupling including a earthling as per
relevant Indian Standard &
specifications.
iii Common bed plate for mounting Pump
and Motor fabricated of Motor
fabricated of suitable M.S.Channel as
per manufacturer’s recommendations.
iv Suitable RC.C Pump-Foundations as
per manufacturer's design and 4 nos.
Dunlop (cushy foot) heavy duty Ant
vibration mounting pads.
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
10
A Fire pump
Capacity 2280 LPM
Head 70 M
HP 75.0
Motor Rpm 1450 to 1600
Each 1
B Fire Jockey Pump Capacity 180 LPM
Head 70 M
HP 15.0
Motor RPM 2900
Each 1
2 Diesel Engine Driven Fire Pumping set
suitable for automatic operation
consisting of the following as per
specifications:
a) Horizontally mounted, centrifugal
type single stage/ multi-stage fire pump
having cast iron body, bronze impeller, stainless steel shaft complete with
necessary pot / Y Type strainer on the
suction side and pressure gauge with
stop cocks etc, on the delivery side
including bypass arrangement (with 50
mm dia G.M. stop valve and upto 5M
G.I. stop valve and upto 5M M.S. pipes)
for periodical testing of the pumping set
b) Water cooled Diesel Engine suitable
for developing at least 65 BHP at
1800 RPM) for above pump complete
with automatic starting mechanism,
batteries, automatic battery charger unit,
flexible coupling with the pump,
coupling with the pump, fuel tank,
silencer, exhaust pipe with insulation
appro.25m length & all standard
accessories as required including
earthing, mandatory spares and tool kit.
c) Common bed plate for mounting
Pump and Engine fabricated of suitable
M.S.Channel as per manufacturer's
recommendations.
d) Suitable RCC Pump foundations as per manufacturer's design 8 Nos Dunlop
Anti-vibration (cushy foot) heavy duty
mounting pads.
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
11
A Capacity - 2850 Lpm
Engine BHP - 76.0
Motor Head - 70 M
Motor Rpm - 1450 to 1600
Each 1
3 Providing and fixing dust and vermin
proof cubical type motor control centre
fabricated from 2mm thick sheet with
stove enameled finish and comprising of
Each 1
i One incoming main moulded case
circuit breaker of 500 AMP rating.
ii One fully taped aluminiuin bus bar of
500 AMP capacity in separate bus.
iii One isolation switch fuse units of 250
AMPS with HRC fuses of 200 AMPS
rating for fire pumps.
iv One isolation switch fuse unit with HRC
fuses of 63 AMPS rating one jockey
pump.
v Two fully auto transformer starter with
push buttons and ON/OFF indicating
lights for fire pump.
vi One rotary heavy duty selector switches
for fire pump.
vii One 144 x 144 mm panel type volt
meter reading 0-500 V with rotary
selector switch for reading voltage
between phases.
vii
i
One 144 x 144 mm panel ampere meter
reading 0-300 AMPS for fire pump.
ix One square panel type ampere meter
reading 0-50 AMPS for jockey pump.
x Appropriate etched plastic plate for each
starter /switch gear, starters, meters
indicating lamps complete in all respect.
xi One single phasing preventor for each phase motor.
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
12
Notes – (The rating of all switch gear
must match the HP of all sumps
quoted).
4 Terrace Booster Pump:
Providing and fixing multi stage
horizontal centrifugal mono block pump
with volute bronze impeller connected
to TEFC induction motor suitable for
400/410 Volts, 3 Phase, 50 Cycles, AC
supply with the following
specifications: (Required as per Code)
A Capacity : 900 LPM
Head : 20 m
HP : 7.5 hp approx. or As required.
Mover : Electric Motor driven
Material of Construction:
Shaft & Sleeve : S.S. 410
Impeller : Bronze
Bearing : Grease lubricated
Seal : Mechanical Seal
Quantity : 1 No.
Each 1
5 Providing and fixing horizontal single
stage high speed pumping set with CI
body brass impeller, stainless steel shaft
and connected by flexible fan cooled
induction motor with all pump
accessories with starter suitable for 400
volts3 phase,50 Hz Ac supply having
following duty :-
A Domestic water Pumps No. of pumps 2 Nos.
Capacity 300 LPM
Head 45 Mtr
Motor HP 10
The pump set shall be complete with:
a) 1 No. M.S. Fabricated Base Plate
b) Suitable size RCC pump
foundation. c) Making necessary Electrical
Connections.
Set 1
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
13
6 Providing and fixing solid state level
controllers for law and high level cut off
for under ground/ over head tank
installation, complete.
Each 2
7 Providing and installing submersible
pump with cast iron body, bronze
impellers, stainless steel shaft and water
lubricated hearing . the pump shall have
the following characteristics (Both the
pumps shall operate simultaneously if
required) complete with starter.
A Sump pumps suitable for muddy
water. a. No. of pumps -1 Nos.
b. Capacity -500 LPM
c. Head -9 Mtr
d. Motor HP -3.0
Set 1
B Sump pumps suitable for muddy
water. a. No. of pumps -1 Nos.
b. Capacity -100LMP
c . Head -9 Mtr
d. Motor HP -1.0
Set 1
8 Providing and fixing cast iron butterfly
valves with epoxy coated disc, carbon
steel shaft and lever actuator tested to 10
Kg-/cm 2 (50 mm dia)
Each 4
9 Providing and fixing brass non return valve of approval quality.
50 min dia
Each 2
10 Providing, and fixing heavy duty PVC
insulated &, PVC sheathed armoured
aluminium conductor cables 1000V
grade including necessary support
clamps and connection plugs complete
in all respects.
A Power cable 3 core 120 sqmm. Meter 15
B Power cable 3 core 70 sqmm. Meter 15
C Power cable 3 core 35 sqmm. Meter 15
D Power cable 3 core 16 sqmm. Meter 15
E Power cable 3 core 6 sqmm.
Meter 15
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
14
11 Providing and fixing 4.00 mm (8 swg)
dia GI wire on surface or in recess for
loop earthing as required.
Meter 20
12 Providing and fixing 25 mm x 5 mm GI
strip on surface or in recess for earth
connections etc, as required.
Meter 13
13 Earthing with GI earth plate 600 mm x 600mm x 6mm thick including
accessories and providing masonry
enclosure with cover plate having
locking arrangement and watering pipe
etc (but without charcoal or coke and
salt complete as required.
Set 2
14 Extra for using salt and charcoal for GI
plate or copper plate earth electrode as
required.
Set 2
15 Alarm system for fire pumps comprising
of audible hooter and red blinking lamp
wired to pressure switch including cost
of pressure switch connected on air
vessel complete In all respects.
Each 1
16 Providing and fixing MS structural work
(fabricated from standard sections eg.
MS rounds, angles,channels, Including cutting to size drilling welding, fixing
and welding to insert plates in RCC
structural members as directed by the
engineer-in-charge including cutting and
making good the walls and floors.(for
cable trays)
Kg 200
TOTAL
ZON AL O FFI C E B U ILD ING FOR B AN K O F INDI A A T S EC TOR -3 1 - A, C H AND IG AR H
S.No Description Units Qty Rate
(In Rs)
Amount
(In Rs.)
CUTTINGS _____________ ADDITIONS _____________ OVER WRITINGS______________
15
SUMMARY OF FIRE FIGHTING SYSTEM WORK
S. NO DESCRIPTIONS PAGE NO. AMOUNT
(IN RS. )
1. FIRE HYDRANT SYSTEM
1-4
2. SPRINKLER SYSTEM
5-7
3 FIRE DETECTION SYSTEM
8
4. PUMP AND ACCESSORIES
9-14
TOTAL