CH. 3 AND 4 - ALKANES, CYCLOALKANES AND...
Transcript of CH. 3 AND 4 - ALKANES, CYCLOALKANES AND...
! www.clutchprep.com
!
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
CONCEPT: FUNCTIONAL GROUPS
● We can group several millions of different molecules into subsets of similar _________________________
1. Hydrocarbons
● All carbon groups regardless of size can be symbolized using an _______ group.
● When an alkane is attached to a greater carbon chain, it is given an ________ suffix. (i.e. __________ group)
● Carbons are given a “degree” based on how many other ____________ they are attached to
□ Hydrogens possess the __________ degree as the carbon they are attached to
□ Degrees are expressed as primary, secondary, tertiary and quaternary (1⁰, 2⁰, 3⁰, 4⁰)
EXAMPLE: Determine the degree of the indicated carbons and hydrogens
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 2
2. Alkyl Halide _________
● Any –R group directly attached to a halogen.
● The degree of alkyl halide is determined the same way as __________________
The carbonyl ____________ is NOT a functional group, but it is a major component of many functional groups
3. Alcohol ____________ 6. Carboxylic Acid ______________(_________) ● Degree of alcohol is determined the same ● The acid of organic chemistry way as ____
4. Amine ______________ 7. Amide _______________(___________)
Degree of alcohol is determined the same ● Degree of alcohol is determined the same way as ____. way as ____.
5. Ether __________________ 8. Ester __________________(___________)
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 3
9. Carbonyls
The term “ carbonyl” is not the proper name of the functional groups because the functionality of the group depends on its location on the carbon chain.
.
● Ketone ______________(__________) ● Aldehyde ______________(__________)
- _______________carbonyl group - _______________carbonyl group
10. Nitrile ________________
11. Benzene
● Directly attached to –R group _______________ (_________)(_____)
● Extra CH2 between –R group _______________ (_____________)(_____)
EXAMPLE: Identify all the functional groups in the following compound. Show degrees where applicable.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 4
12. Other Carbonyl Compounds
● Acyl Chloride (__________) ● Anhydride (_______________)
13. Sulfur Compounds
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 5
PRACTICE: Identify all the functional groups in the following compound. Show degrees where applicable.
a.
b.
c.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 6
CONCEPT: ALKANE NOMENCLATURE
● Before 1919, chemists literally had to memorize thousands of random (common) chemical names.
● IUPAC naming provides a systematic method to give every chemical structure a unique, unambiguous chemical name .
CONCEPT: ALKANE PREFIXES
We will use the following set of rules to systemically name alkanes:
Rule #1. Number the longest carbon chain and assign a root name accordingly.
● If there is a tie between longest chains, choose the chain that gives _____________ substituents.
Alkane Prefixes
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 7
CONCEPT: ALKANE NOMENCLATURE
Rule #2: Decide the direction of the root chain starting from the closest substituent
● If there is a tie between substituents, compare the ______________________ substituents
● If there is STILL a tie, determine direction using _____________________________.
EXAMPLE: Name the longest carbon chain and determine the direction of the root chain
EXAMPLE: Name the longest carbon chain and determine the direction of the root chain
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 8
CONCEPT: ALKANE NOMENCLATURE
Rule #3: Designate numerical locations of substituents
● When one or more substituents are identical, use the prefixes ______ (2), _____ (3), ______ (4).
● Represent substituents using –yl suffix on alkane groups. (alkanes become alkyls)
EXAMPLE: Name the root chain, determine the direction of the root chain and then identify & locate all substituents
Rule #4: Name substituents in alphabetical order (prefixes don’t count toward this!)
Rule #5: Use __________ to separate numbers from numbers, _________ to separate letters from numbers.
EXAMPLE: Provide the IUPAC name for the following alkane:
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 9
CONCEPT: COMMON SUBSTITUENTS
Although we try to use IUPAC naming as much as we can, there are a few common substituents you should know the common names for:
EXAMPLE: Name the following alkane:
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 10
CONCEPT: CYCLOALKANES
□ Monocyclic compounds are named by attaching the prefix “cyclo-“ to the root chain.
● The root is assigned to the portion of the alkane with the greater number of carbons:
● If there is only 1 substituent, the location can be ______________.
EXAMPLE: Name the following alkanes:
□ Bicyclic compounds are composed of ______ distinct rings attached along one bond.
□ Bridged compounds are unique types of bicyclic molecules composed of ____ compound rings attached by _____
___________________________ atoms.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 11
CONCEPT: ALKYL HALIDES
Alkyl halides are named by naming them as a substituent before the root chain and indicating their location.
● Prefixes: -F ______________, -Cl _______________ -Br ________________ -I ______________
Alkyl halides have NO ________________ when it comes to numbering the direction of the chain.
EXAMPLE: Name the following compounds:
a.
b.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 12
CONCEPT: BICYCLICS
□ Bicyclics come in different categories: Normal and Bridged.
Nomenclature:
● A bridgehead atom must always be in the 1 position.
● Format: bicyclo[ring1.ring2.ring3]alkane
● Number from the largest ring to the smallest ring
- If it has no bridge, then the third ring just counts as _____
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 13
CONCEPT: CONFORMATIONS
Most organic molecules have the ability to exist in multiple arrangements without experiencing any chemical changes.
□ Many of these arrangements exist due to the ability of ______ bonds to _____________
□ These arrangements are NOT isomers because structurally the molecule never changes.
EXAMPLE: Hexane Conformers
● These alternate arrangements are called _________________________
PRACTICE: Determine if the following pairs of molecules are isomers or conformers.
a. b.
c. d.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 14
CONCEPT: NEWMAN PROJECTIONS – CONFORMATIONAL ENERGY
Newman projections are drawings used to help us visualize all the conformers that can be made by rotating a ___ bond
□ The dihedral angle ________ is used to describe rotation around a single bond
● Calculated by taking the angle of the largest group on the front and back relative to each other
θ = ____ = ___________________: The two largest groups overlap each other
● _____________ energy
θ = ____ = ___________________: The two largest groups are adjacent to each other
● _____________ energy
θ = ____ = ___________________: The two largest groups are opposite to each other
● _____________ energy
EXAMPLE: Plot the following dihedral angle values with their respective energy to determine the energy diagram for the rotation of hexane along the C3 – C4 bond.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 15
CONCEPT: NEWMAN PROJECTIONS – METHOD
Through a series of steps, we can consistently draw accurate Newman Projections to determine conformational stability.
EXAMPLE: Draw the most energetically favorable Newman Projection for CH3CH2CH2CH2CH3 down the C2 – C3 bond.
1. Convert problem into bond line structure
2. Highlight the bond of interest
3. Draw an eyeball glaring down the length of the bond
4. Surround only the bond of interest with ALL implied hydrogens
5. Draw front carbon with 3 groups in the front and a back carbon with 3 groups in the back
6. Determine which dihedral angle would correspond
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 16
PRACTICE: DRAWING NEWMAN PROJECTIONS
1. Draw the most energetic Newman Projection of CH3CH(C6H5)CH3
2. Draw the most stable Newman Projection of CH3CH2CH2OH through the C2 – C1 bond.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 17
CONCEPT: CALCULATING CONFORMATIONAL ENERGY
□ Sometimes we’ll be asked to calculate the energy barrier (kJ/mol) of rotation or of a specific interaction.
● Barrier to rotation can be calculated by memorizing other known values.
EXAMPLE: The barrier to rotation for the following molecule is 22 kJ/mol . Determine the energy cost associated with the
eclipsing interaction between a bromine and hydrogen atom.
PRACTICE: The barrier to rotation for 1,2-dibromopropane along the C1—C2 bond is 28 kJ/mol. Determine the energy cost
associated with the eclipsing dibromine interaction.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 18
CONCEPT: HEAT OF COMBUSTION
Heat of Combustion is a technique that blows up molecules to see how energetic they are:
___ Heat of Combustion = ____ Energy = ____ Stability
___ Heat of Combustion = ____ Energy = ____ Stability
Sources of Alkane Instability:
1. Shape: Straight chains are less stable than branched chains.
2. Strain: Found in many cycloalkanes. There are a few types of strain:
□ Angle strain exists when cyclic tetrahedral bonds are forced out of their ideal bond angle of ____________
□ Torsional strain exists when neighboring carbons possess hydrogens that overlap in space (eclipse)
EXAMPLE: Which of the following conformations of cyclohexane would have the lowest heat of combustion?
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 19
CONCEPT: CYCLOHEXANE – CHAIRS AND POSITIONS
Although so far we have assumed rings to be planar, cyclohexane actually exists in a ______________ form to alleviate
torsional and ring strain.
Like single bonds, cyclohexane can ___________ to form two different “chair conformations” in equilibrium with each other
Chair conformations have TWO substituent positions:
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 20
CONCEPT: CYCLOHEXANE - DETERMINATION OF CIS AND TRANS
How to draw cyclohexane:
□ Draw two slightly angled parallel lines □ Cap both ends
□ Cis or trans is based on whether the groups are facing the same __________ of the ring
● NOT based on whether they are axial or equatorial.
EXAMPLE: Name the following cyclohexane compounds:
a.
b.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 21
CONCEPT: CYCLOHEXANE – EQUIVALENT CHAIRS
Many of the cyclohexane molecules we will draw in this chapter will be substituted.
□ In this chapter, only three things matter when drawing equivalent chairs.
● Distance between groups
● Cis vs. Trans
● Equatorial Preference (determines conformers)
PRACTICE: Determine if the following pairs of chairs are identical, conformers or different.
a.
b.
c.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 22
CONCEPT: CYCLOHEXANE – EQUATORIAL PREFERENCE
One of the two positions is much more crowded or ______________ ____________________ than the other.
● Rings will ALWAYS “flip” in order to accommodate the preference of their largest, bulkiest substituent. When chairs flip: □ Axials become ______________________ □ Equatorials become ______________________ EXAMPLE: This chair is not in its most stable conformation. Draw the chair flipping to accommodate equatorial preference a.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 23
PRACTICE: Drawing Equatorial Preference
1. Draw the MOST STABLE conformation of cis-1-tert-butyl-4-methylcyclyhexane
2. Draw the LEAST STABLE conformation of trans-1-tert-butyl-3-neopentylcyclohexane.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 24
CONCEPT: CALCULATING FLIP ENERGY
Sometimes we’ll be asked to calculate the energy required (kJ/mol) to flip chairs into the axial position.
PRACTICE: Calculate the difference in Gibbs free energy in (kJ/mol) and (kcal/mol) between the alternative chair conformations of the following disubstituted cyclohexanes:
a. trans-4-iodo-1-cyclohexanol
b. cis-2-ethyl-1-phenylcyclohexane
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 25
CONCEPT: CALCULATING CHAIR EQUILIBRIUM
We can use the difference in (∆Gº) to calculate the percentage and/or ratio of chairs at any given temperature.
● First, use ∆Gº to solve for the equilibrium constant:
*Correction: Gas Constant = 8.314
● Then, use Ke to solve for the percentage of each conformer:
PRACTICE: Estimate the equilibrium composition of the chair conformers of the following cyclohexanes at room temp:
a) cis-1,3-diethylcyclohexane
b) trans-1-methyl-3-phenylcyclohexane
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 26
CONCEPT: DECLINS
□ Declins are specific types of bicyclic molecules. They come in two conformations of differing stability.
EXAMPLE: Draw the following declin as a chair conformation in the most stable conformation.
ORGANIC - MCMURRY 9E
CH. 3 AND 4 - ALKANES, CYCLOALKANES AND THEIR STEREOCHEMISTRY
Page 27