CG Electric Systems Hungary Zrt. · PDF file• Slip-ring room lighting ... Slip-ring...
Transcript of CG Electric Systems Hungary Zrt. · PDF file• Slip-ring room lighting ... Slip-ring...
CG Electric Systems Hungary Zrt.Rotating Machines Business Unit
Smart solutions.Strong relationships.
I n t r od u c t i on
More than 130 years expertisein rotating electric machinesproduction
Smart solutions.Strong relationships.
3
CGL completed the acquisitionof the Belgium-based Pauwels
Change of name to CGL(Crompton Greaves Ltd.)
The company (CPL) was taken overby Lala Karamchand Thapar
Crompton Parkinson Ltd. wasestablished
R.E.B. Crompton foundedR.E.B. Crompton & Co.
2000
1991
1980s
1894
1884
1878
1844
2005
1966
1947
1937
1927
The Hungarian Transelektro acquiredfrom Ansaldo the shares andestablished Ganz Transelektro Ltd.
Joint venture between Ganz ElectricWorks and the Italian Ansaldo, namedGanz Ansaldo Electric Ltd.
Ganz Electric Workstill the end of the 1980s
The company started the productionof three-phase induction motors
Invention of the transformer KárolyZipernowszky, Miksa Déri, Ottó Bláthy
András Mechwart founded theElectrotechnical Department
Ábrahám Ganz founded his company
Crompton
Greaves
The name of Ganz Transelektro hasofficially changed to CG ElectricSystems Hungary Zrt.
Ganz Transelektro Electric Co. Ltd.is a wholly-owned subsidiary ofCrompton Greaves Ltd.
2009
2006
Main application fields
• Cement industry• Energy• Irrigation• Chemicals• Metal Industry• Mining
• Oil and gas• Shredder• Transportation• Water supply
4
I n t r od u c t i on
Induction motors
CG Electric System Hungary's induction motor seriesmeet the requirements of all industrial fields in awide range of rated power, voltage, speed andenclosures.
Our motors are supplied in compliance with theapplicable IEC Standards. In particular, they complywith the following Standards:• BS 4999 (U. K.)• VDE 0530 – Teil 1 (Germany)Upon request, motors complying with the US NEMAStandards MG.1. may also be supplied. Outputratings, main fixing and coupling dimensions(frame size etc.) of motors comply with IECPublication 72-2.
Standard conditions for rated output are as follow:• Continuous duty (S1) at rated voltage and rated
frequency• Height above sea level not exceeding 1000 m• Ambient temperature not exceeding 40 ºC• Temperature of cooling water at inlet of heat
exchanger not exceeding 25 ºC• Rated voltage: 6 kV• Frequency: 50 Hz.
Motors can be designed to operate on Class Ftemperature rise. In this case the rated load may beincreased app. 13%. We can also deliver motorswith other rated voltage levels between 0.4–15 kVand for 60 Hz, too.
Our Quality Assurance Program covers design,procurement, manufacturing and testing. Thisprogram meets the requirements of relevantInternational Standards such as:
Reference standards
Output power
Quality assurance
Quality Management System ISO 9001:2000 andEnvironmental Management System ISO14001:2004.The Quality System has been assessed by EQNet.
All motors are individually routine tested. Type orany special tests may be performed and will bequoted upon request.
Our standard constructions and mountingarrangements are IM B3 or IM V1 (IM 1001 or IM3011) according to IEC 60034-7. Upon request,other versions are available for example IM B20 orIM B35 and others.
Degree of protection of the motors complies with thefollowing standards : IEC 60034-5 and DIN 40050.
The method of cooling of motors complies with theIEC 60034-6 Standard. The standard ventilationmethod of protected type machine is IC 01. Thestandard built in air-to-water heat exchangers(machines IC 81W7) are designed allowing 5 Ktemperature rise in water. Upon request we supplymotors with coolers also for sea-water. Ductventilated – IC 31 – motors are also available.Standard air-cooled closed motor is as per IC 611.
Stator laminations are made of high-grade insulatedelectrotechnical steel-sheets. MICASYSTEM, theclass F insulating system specially developed forstator windings of AC motors is used for voltagerating from 400 up to 15000 V. This high reliability
Tests
Type of construction
Degree of protection
Method of cooling
Insulation system and stator winding
Constructional features
General technical information
Gene ra l Techn i ca l I n f o r ma t i on
Type designation
*In case of horizontal motor this character is blank.
F H C V 560 E w 4
Indu
ctio
nm
otor
Prot
ectio
nan
dco
olin
g
Type
ofro
tor
Vert
ical
*
Rese
rve
Fram
esi
ze
Fram
ele
ngth
code
Mag
netic
core
leng
thco
de
Num
ber o
f pol
es
5
ISO9001
ISO14001
ISO18001
advanced insulating system is based on the use ofcured mica tapes and vacuum pressureimpregnation with a blend of solvent less epoxyresin. MICASYSTEM, which was developed throughlong research and extensive testing activity, providesexcellent dielectric and mechanical properties and allphysical characteristics needed by the differentapplications of motors.
Low noise and vibration is obtained by:• rugged mechanical construction• streamlined design of fans and air ducts to
secure optimum air flow.Our motors meet the requirements of IEC 60034-9,IEC 60034-14 and VDI 2056. Noise silencers areavailable upon request.
We produce motors for potentially explosiveatmosphere with the following degrees of protection:• Increased safety motors: EExe• Pressurised motors: EExp• Non sparking motors: EExn (IEC 60079).
· Pole changing asynchronous generator.
Terminal boxes consist of a sturdy weldedconstruction with ample space for connecting theincoming cables. Basic design enables cableconnections from bottom (standard) as well as fromthe top right and left, by turning the box in steps of90 degrees. The terminal boxes comply with IP 55
Noise and vibration
Motors operating in hazardous environment
Special application
Terminal boxes
degree of protection according to IEC 60034-5, andare designed and built to withstand the thermal anddynamic stresses of an eventual phase-to-phaseshort-circuit in the terminal box or in the winding.
Upon request, neutral point terminal box with orwithout current transformers, low or high voltageextra size main terminal boxes with lightningarrestors and surge capacitors are available. Phasesegregated terminal boxes and terminal boxes withElastimould connectors also can be supplied.
Our motors are normally fitted with antifrictionbearings. For horizontal construction (IM 1001), thefixed bearing is usually located at the drive endwhereas the floating bearing is at the non drive-end.The fixed bearing on drive side is double one,consisting of a cylindrical roller bearing for radialload and a deep groove ball bearing to withstand theaxial thrust.
For high axial loads, double row self-aligningspherical roller bearing is applied. Bearingcompartments are equipped with relubricatingdevice and SPM adapters. For IP 55 protection thebearings are sealed with additional V-rings. Sleevebearings are available upon request.
Bearing configuration for vertical machines isselected taking into account the following designparameters:• speed and dead load of the rotor;• additional dead load due to the rotor of the driven
machine;
Bearings
Variants of construction
Construction
FHFWFRFDFT
Variants of rotor
Rotor code
..A
..E
..M
..S
..C
Protection
IP 23
IPW 24
IP 54
IP 54
IP 54
Rotor variants
wound rotor
wound rotor
wound rotor
wound rotor
cage rotor
Cooling
IC 0A1
IC 0A1
IC 8A1W7
IC 3A1
IC 6A1A1
Type of construction
IM 1001 (IM B3), IM 1002, IM 3011 (IM V1)
IM 1001 (IM B3), IM 1002, IM 3011 (IM V1)
IM 1001 (IM B3), IM 1002, IM 3011 (IM V1)
IM 1001 (IM B3), IM 1002, IM 3011 (IM V1)
IM 1001 (IM B3), IM 1002, IM 3011 (IM V1)
Rotor variants
constant contact
manually operated brush lifting device
motor driven brush lifting device
synchronous induction motor
for light and heavy start
Bearings
roller or slide
roller or slide
roller or slide
roller or slide
roller or slide
Gene r a l Techn i ca l I n f o r ma t i on
Stator terminal box
U = 6 kVI = 400 A
max
max
Rotor terminal box
(N/A for cage rotor motors)U = 1500 VI = 1250 A
max
max
6
• hydraulic upthrust and/or downthrust at runningand starting conditions from coupled pumps.
Basic configuration for medium-size motors, 4poles and above, includes one single-row angular-contact grease lubricated ball bearing located in theupper shield having combined thrust and guidefunction, plus one deep-groove grease-lubricatedball bearing in the lower shield with guide functiononly. The lower bearing is free to slide axially toallow the thermal expansion of the shaft.
For severe conditions the basic configuration can bemodified providing two angular-contact greaselubricated self-cooled ball bearings in tandem.
Another configuration, especially designed forlow-speed motors with heavy rotors, includes onespherical roller thrust bearing to carry axial load andone deep-groove ball bearing performing the guidefunction on the upper side. Each bearing is self-cooled or provided with water cooled oil lubrication.In the lower shield there is a deep-groove ball orcylindrical roller bearing to perform guide function.
In the case when the speed/load conditions exceedthe capability of antifriction bearings, but also uponrequest, pivoted pad combined vertical thrust andguide bearing is used in the upper shield. Pivotedpad or cylindrical guide bearing is mounted in thelower shield. Depending on design conditions thesebearings can be self-lubricated and cooled bynatural air circulation around the oil reservoir or byinduced air over the finned cooling surfaces of thebearing compartment. They also can be cooled by
water circulating in wire wound tube coolerssubmerged in the oil tank or by circulating the oiltrough an external air-to-water heat exchanger.
• Base plate• Sole plate• Foundation beam
• Additional RTD-s (Pt 100)• Dial type thermometers• Thermistors on end winding parts• Vibration monitoring• Bearing SPM probes• Bently Nevada bearing monitoring• Water leakage detector• Humidity sensor• Water flow-switch• Water flow-meter• Water pressure-gauge• Differential manometer or vacuum-switch for
filter fouling• Oil flow regulator• Oil pressure-gauge• Speed sensor
• Slip-ring room lighting• Power factor correcting capacitor• Starting rheostat• Special inox-wool filter• Backstop device
Foundation accessories
Instrumentation
Further extras
Options
Standard horizontalbearing arrangements
Standard ver ticalbearing arrangements
D.S. bearing assembly D.C.S. bearing assembly
Gene r a l Techn i ca l I n f o r ma t i on
Special terminal box
Phase segregated main terminal box withlightning arrestors and surge capacitorsU = 6600 VI = 400 A
max
max
7
Gene ra l Techn i ca l I n f o r ma t i on
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Special applications
1.
FHC 450 K2 type (1000 kW, 6000 V, 2984 r.p.m.)
2.
FDDZe 1126 V16 type (2900 kW, 6000 V, 368 r.p.m.)
3.
FHCV 710 Lv8 type (2000 kW, 11000 V, 755 r.p.m.)
4.
FOA 710 Ls6 type (2000 kW, 6000 V, 995 r.p.m.)
Cage-rotor induction motor for gas-turbine starting – GE Power Europe
Increased safety cage-rotor induction motors piston-compressor drive – Hungarian National Oil Co.
Cage-rotor induction pole-changing hydro-generator – Northern Electric Scotland
Slip-ring induction motor for conveyor-belt drive – RWE Power
1
2
2
4
Type
400 K400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
4*–6–124*–6–124*–6–12
A
800800
900900900
100010001000
112011201120
125012501250
140014001400
160016001600
B
8001000
800900
1120
90010001250
100011201400
112012501600
125014001800
160018002000
C
250250
250250250
280280280
280280280
315315315
315315315
315315315
D, DA
110110
120120120
140140140
160160160
160180180
180200200
220220250
E, EA
210210
210210210
250250250
300300300
300300300
300350350
350350410
H
400400
450450450
500500500
560560560
630630630
710710710
800800800
HD
14001400
160016001600
180018001800
200020002000
225022502250
250025002500
280028002800
L
15551765
155517051875
176519352125
192521152315
211623202570
228025852835
252528153170
LC
17701980
177019202090
202021902380
223024202620
243026302880
260029503200
289031803590
FHC , FRC , FDC , FWC S ER IESF H C I P 2 3 I C 0 1 / O VE RA L L D I M E N S I O N O F M O T O R
* with slide-bearing block
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IP 23, IM B3, IM V1
FHC type belongs to our general purpose F series,consisting of horizontal, foot mounted (IM B3, IEC34-7) induction machines constructed on theprinciple of variable modules. FHC type is throughventilated (IP 23, IEC 34-5), self-cooled (IC 01, IEC34-6), protected against water spray fitted with asquirrel cage rotor for direct starting. The range ofrated powers as a function of number of poles of the6000 V, 50 Hz basic design motors with class Finsulation for S1 type duty as per IEC 34-1operational conditions are shown on the diagrambelow.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disc, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, top mounted airconducting box, two-layer stator winding withstrengthened turn-to- turn insulation, fabricated steel
terminal boxes of IP 55 protection grade withpressure relief membrane, double-cage rotor forheavy starting. Pt 100 resistance temperaturedetectors are built in the stator slots and at thebearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (two shaft ends, slidebearing, increased safety, pressurized and non-sparking type design for potentially explosiveenvironment) versions and variants meeting specialrequirements and standards (low noise, highrunaway speed, increased reliability for energetics,etc.).
OUTLINE DRAWING
FHC type high voltageinduction motors
Sq u i r r e l Cage I nd u c t i on Mo t o r s
9
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Type
400 L400 J400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
6–126–126–12
A
950950950
105010501050
115011501150
130013001300
140014001400
160016001600
180018001800
D
100100100
110110110
130130130
150150150
180180180
200200200
220220220
FHCV IP 23 IC 01 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
N
780780780
880880880
100010001000
112011201120
125012501250
140014001400
160016001600
P
900900900
100010001000
115011501150
125012501250
140014001400
160016001600
180018001800
E
210210210
210210210
250250250
250250250
300300300
350350350
350350350
LH
105012001350
115013001450
130014501650
140016001800
160018002050
170020002250
190022002450
L
139015401690
154016901840
194020902290
217023702570
242026202870
271030103260
291032103460
LC
160017501900
175019002050
194020902290
217023702570
242026202870
271030103260
291032103460
FHCV type belongs to our general purpose F series,consisting of vertical, flange mounted (IM V1, IEC34-7) induction machines constructed on theprinciple of variable modules. FHCV type is through-ventilated (IP 23, IEC 34-5), self-cooled (IC 01, IEC34-6), protected against water spray and fitted witha squirrel cage rotor for direct starting. The range ofrated powers as a function of number of poles of the6000 V, 50 Hz basic design motors with class Finsulation for S1 type duty as per IEC 34-1operational conditions are shown on the diagrambelow.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disc, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, side mounted airconducting box, two-layer stator winding withstrengthened turn-to-turn insulation, fabricated steelterminal boxes of IP 55 protection grade with
pressure relief membrane, double-cage rotor forheavy starting. Pt 100 resistance temperaturedetectors are built in the stator slots and at thebearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (increased safety,pressurized and non-sparking type design forpotentially explosive environment) versions andvariants meeting special requirements and standards(low noise, high runaway speed, increased reliabilityfor energetics, etc.). Oil lubricated spherical rollerbearings are applied for high axial loads and lowspeed motors, or oil lubricated slide thrust bearingsfor high-speed motors.
OUTLINE DRAWING
FHCV type high voltageinduction motors
FHCV, FRCV, FDCV, FWCV SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IP 23, IPW 24, IP 54, IM V1
10
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Sq u i r r e l Cage I nd u c t i on Mo t o r s
Type
400 K400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
4*–6–124*–6–124*–6–12
A
800800
900900900
100010001000
112011201120
125012501250
140014001400
160016001600
B
8001000
800900
1120
90010001250
100011201400
112012501600
125014001800
160018002000
C
250250
250250250
280280280
280280280
315315315
315315315
315315315
D, DA
110110
120120120
140140140
160160160
160180180
180200200
220220250
E, EA
210210
210210210
250250250
300300300
300300300
300350350
350350410
H
400400
450450450
500500500
560560560
630630630
710710710
800800800
HD
16001600
180018001800
200020002000
225022502250
225025002500
250028002800
280028003150
L
17902000
179019402110
199021602350
217523652365
241026102860
263029303180
293032203570
LC
20302240
203021802350
227524452635
250026902890
273029303180
295033003550
331035904010
FTC IP 54 IC 611 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
FTC type belongs to our general purpose F series,consisting of horizontal, foot mounted (IM B3,IEC 34-7) induction machines constructed on theprinciple of variable modules. FTC type is totallyenclosed (IP 54, IEC 34-5), self-ventilated with air-to-air heat exchanger (IC 61, IEC 34-6) and squirrelcage rotor for direct starting. The range of ratedpowers as a function of number of poles of the 6000V, 50 Hz basic design motors with class F insulationfor S1 type duty as per IEC 34-1 operationalconditions are shown on the diagram below.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disk, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, swept-back blade radialventilator with reversible according to the direction ofrotation blade-holder in the outer air-circuit, topmounted heat exchanger with aluminium tubes, two-
layer stator winding with strengthened turn-to-turninsulation, fabricated steel terminal boxes of IP 55protection grade with pressure relief membrane anddouble-cage rotor for heavy starting. Pt 100resistance temperature detectors are built in thestator slots and at the bearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (two shaft ends, slidebearings, increased safety, pressurized and non-sparking type design for potentially explosiveenvironment) versions and variants meeting specialrequirements and standards (low noise, highrunaway speed, increased reliability for energetics).
FTC type high voltageinduction motors
FTC SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 611, IC 616, IP 54, IM B3
OUTLINE DRAWING
11
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Sq u i r r e l Cage I nd u c t i on Mo t o r s
FTCV type belongs to our general purpose F series,consisting of vertical, flange mounted (IM V1, IEC34-7) induction machines constructed on theprinciple of variable modules. FTCV type is totallyenclosed (IP 54, IEC 34-5), self-ventilated with air-to-air heat exchanger (IC 61, IEC 34-6) and squirrelcage rotor for direct starting. The range of ratedpowers as a function of number of poles of the 6000V, 50 Hz basic design motors with class F insulationfor S1 type duty as per IEC 34-1 operationalconditions are shown on the diagram below.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disk, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, swept-back blade radialventilator with reversible according to the direction ofrotation blade-holder in the outer air-circuit, sidemounted heat exchanger with aluminium tubes, two-layer stator winding with strengthened turn-to-turn
insulation, fabricated steel terminal boxes of IP 55protection grade with pressure relief membrane anddouble-cage rotor for heavy starting. Pt 100resistance temperature detectors are built in thestator slots and at the bearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (increased safety,pressurized and non-sparking type design forpotentially explosive environment) versions andvariants meeting special requirements and standards(low noise, high runaway speed, increased reliabilityfor energetics). Oil lubricated spherical rollerbearings are applied for high axial loads and low-speed motors, or oil lubricated slide thrust bearingsfor high-speed motors.
FTCV type high voltageinduction motors
Type
400 L400 J400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
6–126–126–12
A
950950950
105010501050
115011501150
130013001300
140014001400
160016001600
180018001800
D
100100100
110110110
130130130
150150150
180180180
200200200
220220220
N
780780780
880880880
100010001000
112011201120
125012501250
140014001400
160016001600
P
900900900
100010001000
115011501150
125012501250
140014001400
160016001600
180018001800
E
210210210
210210210
250250250
250250250
300300300
350350350
350350350
LH
105012001350
115013001450
130014501650
140016001800
160018002050
170020002250
190022002450
L
169018401990
184019902140
199021402340
218023802580
238025802830
262029203170
282031203370
LC
190020502200
205022002350
224023902590
243026302830
268028803130
297032703520
317034703720
FTCV IP 54 IC 611 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
FTCV SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 611, IC 616, IP 54, IM V1
OUTLINE DRAWING
12
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Sq u i r r e l Cage I nd u c t i on Mo t o r s
FRC type belongs to our general purpose F series,consisting of horizontal, foot mounted (IM B3,IEC 34-7) induction machines constructed on theprinciple of variable modules. FRC type is totallyenclosed (IP 54, IEC 34-5), self-ventilated with air-to-water heat exchanger (IC 81 W7, IEC 34-6) andsquirrel cage rotor for direct starting. The range ofrated powers as a function of number of poles of the6000 V, 50 Hz basic design motors with class Finsulation for S1 type duty as per IEC 34-1operational conditions are shown on the diagrambelow.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disc, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, top mounted heatexchanger with brass tubes, two-layer stator windingwith strengthened turn-to-turn insulation, fabricated
steel terminal boxes of IP 55 protection grade withpressure relief membrane, double cage rotor forheavy starting. Pt 100 resistance temperaturedetectors are built in the stator slots and at thebearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (two shaft ends, slidebearing, increased safety, pressurized and non-sparking type design for potentially explosiveenvironment) versions and variants meeting specialrequirements and standards (low noise, highrunaway speed, increased reliability for energetics,etc.).
FRC type high voltageinduction motors
OUTLINE DRAWING
FHC, FRC, FDC, FWC SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IP 23, IP 54, IC 81 W7... IM B3, IM V1Type
400 K400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
4*–6–124*–6–124*–6–12
A
800800
900900900
100010001000
112011201120
125012501250
140014001400
160016001600
B
8001000
800900
1120
90010001250
100011201400
112012501600
125014001800
160018002000
C
250250
250250250
280280280
280280280
315315315
315315315
315315315
D, DA
110110
120120120
140140140
160160160
160180180
180200200
220220250
E, EA
210210
210210210
250250250
300300300
300300300
300350350
350350410
H
400400
450450450
500500500
560560560
630630630
710710710
800800800
HD
16001600
180018001800
200020002000
225022502250
250025002500
250028002800
280028002800
L
15551765
155517051875
176519352125
192521152315
211623202570
228025852835
252528153170
LC
17701980
177019202090
202021902380
223024202620
243026302880
260029503200
289031803590
FRC IP 44 IC 81 W7 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
13
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Sq u i r r e l Cage I nd u c t i on Mo t o r s
FRC type belongs to our general purpose F series,consisting of vertical, flange mounted (IMV1, IEC34-7) induction machines constructed on principleof variable modules. FRC type is totally enclosed (IP54, IEC 34-5), self-ventilated motor with air-to waterheat exchanger (IC 81 W7, IEC 34-6) and squirrelcage rotor for direct starting. The range of ratedpowers as a function of number of poles of the 6000V, 50 Hz basic design motors with class F insulationfor S1 type duty as per IEC 34-1 operationalconditions are shown on the diagram below.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disc, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, side mounted heatexchanger with brass tubes, two-layer stator windingwith strengthened turn-to-turn insulation, fabricatedsteel terminal boxes of IP 55 protection grade withpressure relief membrane, double cage rotor for
heavy starting. Pt 100 resistance temperaturedetectors are built in the stator slots and at thebearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (increased safety,pressurized and non-sparking type design forpotentially explosive environment) versions andvariants meeting with special requirements andstandards (low noise, high runaway speed,increased reliability for energetics, etc.). Oillubricated spherical roller bearings are applied forhigh axial loads and low-speed motors, or oillubricated slide thrust bearings for high-speedmotors.
FRCV type high voltageinduction motors
OUTLINE DRAWING
Type
400 L400 J400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
6–126–126–12
A
950950950
105010501050
115011501150
130013001300
140014001400
160016001600
180018001800
D
100100100
110110110
130130130
150150150
180180180
200200200
220220220
N
780780780
880880880
100010001000
112011201120
125012501250
140014001400
160016001600
P
900900900
100010001000
115011501150
125012501250
140014001400
160016001600
180018001800
E
210210210
210210210
250250250
250250250
300300300
350350350
350350350
LH
105012001350
115013001450
130014501650
140016001800
160018002050
170020002250
190022002450
L
139015401690
154016901840
169018402040
192021202320
212023202570
236026602910
256028603110
LC
160017501900
175019002050
194020902290
217023702570
242026202870
271030103260
291032103460
FRCV IP 44 IC 81 W7 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
FHCV, FRCV, FDCV, FWCV SERIES
2 4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IP 23, IP 44, IP 81 W7... IPW 24, IMP 3, IM V1
Number of poles
14
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Sq u i r r e l Cage I nd u c t i on Mo t o r s
FHA type belongs to our general purpose F series,consisting of horizontal, foot mounted (IM B3,IEC 34-7) induction machines constructed on theprinciple of variable modules. FHA type is throughventilated, self-cooled (IC 01, IEC 34-6), protectedagainst water spray (IP 23, IEC 34-5) and fitted withslip-ring rotor with permanently operating brusheswith rotor circuit resistance for starting and speedcontrol. The range of rated powers as a function ofnumber of poles of the 6000 V, 50 Hz basic designmotors with class F insulation for S1 type duty asper IEC 34-1 operational conditions are shown onthe diagram below.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disk, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, top mounted air-conducting box, two-layer stator winding with
strengthened turn-to-turn insulation, fabricated steelterminal boxes of IP 55 protection grade withpressure relief membrane, 3-phase two-layer rotorwinding. Pt 100 resistance temperature detectorsare built in the stator slots and at the bearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable, pole-changing) and constructional (two shaftends, slide bearings, manual or motor driven brush-lifting device with short circuiting contacts, weatherprotected or pipe connec-tion design) versions andvariants meeting special requirements and standards(low noise, high runaway speed, speed control withthyristor cascade, etc.).
FHA type high voltageinduction motors
OUTLINE DRAWING
Type
400 K400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
4*–6–124*–6–124*–6–12
A
800800
900900900
100010001000
112011201120
125012501250
140014001400
160016001600
B
8001000
800900
1120
90010001250
100011201400
112012501600
125014001800
160018002000
C
250250
250250250
280280280
280280280
315315315
315315315
315315315
D, DA
110110
120120120
140140140
160160160
160180180
180200200
220220250
E, EA
210210
210210210
250250250
300300300
300300300
300350350
350350410
H
400400
450450450
500500500
560560560
630630630
710710710
800800800
HD
14001400
160016001600
180018001800
200020002000
225022502250
250025002500
280028002800
L
20852295
208522352405
229524652655
252527152915
271629203170
295032553505
319534853840
LC
23002510
230024502620
255027202910
283030203220
303032303480
327036203870
356038504260
FHA IP 23 IC 01 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
FHA, FRA, FDA, FWA SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IC 81, W7, IC 31, IP 23, IPW 24, IP 54, IM B3
15
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
S l i p R i ng I nduc t i on Mo to r s
FHAV type belongs to our general purpose F series,consisting of vertical, flange mounted (IM V1, IEC34-7) induction machines constructed on principleof variable modules. FHAV type is through-ventilated,self-cooled (IC 01, IEC 34-6), protected againstwater spray (IP 23, IEC 34-5) and fitted with slip-ring rotor with permanently operating brushes withrotor circuit resistance for starting and speedcontrol. The range of rated powers as a function ofnumber of poles of the 6000 V, 50 Hz basic designmotors with class F insulation for S1 type duty asper IEC 34-1 operational conditions are shown onthe diagram below.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disk, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, two-layer stator windingwith strengthened turn-to-turn insulation, fabricatedsteel terminal boxes of IP 55 protection grade with
pressure relief membrane, 3 phase two-layer rotorwinding. Pt 100 resistance temperature detectorsare built in the stator slots and at the bearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable, pole-changing) and constructional (manual ormotor driven brush-lifting device with shortcircuiting contacts, weather protected or pipeconnection design) versions and variants meetingspecial requirements and standards (low noise, highrunaway speed, speed control with thyristorcascade, etc.). Oil lubricated spherical rollerbearings are applied for high axial loads and low-speed motors, or oil lubricated slide thrust bearingsfor high-speed motors.
FHAV type high voltageinduction motors
Type
400 L400 J400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
6–126–126–12
A
950950950
105010501050
115011501150
130013001300
140014001400
160016001600
180018001800
D
100100100
110110110
130130130
150150150
180180180
200200200
220220220
N
780780780
880880880
100010001000
112011201120
125012501250
140014001400
160016001600
P
900900900
100010001000
115011501150
125012501250
140014001400
160016001600
180018001800
E
210210210
210210210
250250250
250250250
300300300
350350350
350350350
LH
160017501900
170018502000
185020002200
200022002400
220024002650
240026502900
260029003150
L
199020902240
209022402390
224023902590
252027202920
272029203170
306033103560
326035603810
LC
215023002450
230024502600
249026402840
277029703170
307032203470
341036603910
361039104160
FHAV IP 23 IC 01 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
FHAV, FRAV, FDAV, FWAV SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IP 23, IM V1
OUTLINE DRAWING
16
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
S l i p R i ng I nduc t i on Mo to r s
FTA type belongs to our general purpose F seriesconsisting of horizontal, foot mounted (IM B3,IEC 34-7) induction machines constructed on theprinciple of variable modules. FTA type is totallyenclosed (IP 54, IEC 34-5), self-ventilated motorhaving air-to-air heat exchanger (IC 61, IEC 34-6)and slip-ring rotor with permanently operatingbrushes with rotor circuit resistance for starting andspeed control. The range of rated powers as afunction of number of poles of the 6000 V, 50 Hzbasic design motors with class F insulation for S1type duty as per IEC 34-1 operational conditions areshown on the diagram below.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disc, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, swept-back blade radialventilator with reversible according to the direction of
rotation blade-holder in the outer air-circuit, topmounted heat exchanger with aluminium tubes, two-layer stator winding with strengthened turn-to-turninsulation, fabricated steel terminal boxes of IP 55protection grade with pressure relief membrane,3-phase two-layer rotor winding. Pt 100 resistancetemperature detectors are built in the stator slots andat the bearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (two shaft ends, slidebearings, manual or motor driven brush-lifting)versions and variants meeting special requirementsand standards (low noise, high runaway speed,speed control with thyristor cascade, etc.).
FTA type high voltageinduction motors
OUTLINE DRAWING
FTA SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 611, IC 616, IP 54, IM B3Type
400 K400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
4*–6–124*–6–124*–6–12
A
800800
900900900
100010001000
112011201120
125012501250
140014001400
160016001600
B
8001000
800900
1120
90010001250
100011201400
112012501600
125014001800
160018002000
C
250250
250250250
280280280
280280280
315315315
315315315
315315315
D, DA
110110
120120120
140140140
160160160
160180180
180200200
220220250
E, EA
210210
210210210
250250250
300300300
300300300
300350350
350350410
H
400400
450450450
500500500
560560560
630630630
710710710
800800800
HD
16001600
180018001800
200020002000
225022502250
250025002500
250028002800
280028003150
L
23202530
232024702640
252026902880
277529653165
301032103460
330036003850
360038904240
LC
25602770
256027102880
280529753165
310032903490
333035303780
362039704220
398042604680
FTA IP 54 IC 611 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
17
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
S l i p R i ng I nduc t i on Mo to r s
FTAV type belongs to our purpose F series consistingof vertical, flange mounted (IMV1, IEC 34-7) inductionmachines constructed on principle of variablemodules. FTAV type is totally enclosed (IP 54, IEC 34-5), self-ventilated motor with air-to-air heat exchanger(IC 61, IEC 34-6) and slip-ring rotor with permanentlyoperating brushes with rotor circuit resistance forstarting and speed control. The range of rated powersas a function of number of poles of the 6000 V, 50 Hzbasic design motors with class F insulation for S1 typeduty as per IEC 34-1 operational conditions are shownon the diagram below.
Main constructional features of the motors are robustwelded stator case, fabricated steel shields, labyrinthsealed bearings with grease disc, two symmetricalinner air circuits with radial air ducts for bothdirections of rotation, swept-back blade radialventilator with reversible according to the direction ofrotation blade-holder in the outer air-circuit, sidemounted heat exchanger with aluminium tubes, two-
layer stator winding with strengthened turn-to-turninsulation, fabricated steel terminal boxes of IP 55protection grade with pressure relief membrane,3-phase two-layer rotor winding. Pt 100 resistancetemperature detectors are built in the stator slots andat the bearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibration sensor,speed sensor) and space heaters. Beside the basicdesign we can deliver variants of special electrical (15kV, 60 Hz, 6 terminals, two voltage level, even higherpole numbers than shown in the table) andconstructional (manual or motor driven brush-lifting)versions and variants meeting special requirementsand standards (low noise, high runaway speed, speedcontrol with thyristor cascade, etc.). Oil lubricatedspherical roller bearings are applied for high axialloads and low-speed motors, or oil lubricated slidethrust bearings for high-speed motors.
OUTLINE DRAWING
FTAV type high voltageinduction motors
Type
400 L400 J400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
6–126–126–12
A
950950950
105010501050
115011501150
130013001300
140014001400
160016001600
180018001800
D
100100100
110110110
130130130
150150150
180180180
200200200
220220220
N
780780780
880880880
100010001000
112011201120
125012501250
140014001400
160016001600
P
900900900
100010001000
115011501150
125012501250
140014001400
160016001600
180018001800
E
210210210
210210210
250250250
250250250
300300300
350350350
350350350
LH
160017501900
170018502000
185020002200
200022002400
220024002650
240026502900
260029003150
L
224023902540
239025402690
254026902890
278029803180
298031803430
332035703820
352038204070
LC
245026002750
260027502900
279029403140
303032303430
328034803730
367039204170
387041704420
FTAV IP 54 IC 611 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
FTAV SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 611, IC 616, IP 54, IM V1
18
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
S l i p R i ng I nduc t i on Mo to r s
FRA type belongs to our general purpose F series,consisting of horizontal, foot mounted (IM B3,IEC 34-7) induction machines constructed onprinciple of variable modules. FRA type is totallyenclosed (IP 54, IEC 34-5), self cooled with air-to-water heat exchanger (IC 81 W7, IEC 34-6) and slip-ring rotor with permanently operating brushes withrotor circuit resistance for starting and speedcontrol. The range of rated powers as a function ofnumber of poles of the 6000 V, 50 Hz basic designmotors with class F insulation for S1 type duty asper IEC 34-1 operational conditions are shown onthe diagram below.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disk, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, top mounted heatexchanger with brass tubes, two-layer stator winding
with strengthened turn-to-turn insulation, fabricatedsteel terminal boxes of IP 55 protection grade withpressure relief membrane, 3-phase two-layer rotorwinding. Pt 100 resistance temperature detectorsare built in the stator slots and at the bearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (two shaft ends, slidebearings, manual or motor driven brush-liftingdevice with short circuiting contacts, weatherprotected or pipe connection design) versions andvariants meeting special requirements and standards(low noise, high runaway speed, speed control withthyristor cascade, etc.).
FRA type high voltageinduction motors
OUTLINE DRAWING
FHA, FRA, FDA, FWA SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IC 81 W7, IC 31, IP 23, IPW 24, IP 54, IM B3Type
400 K400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
4*–6–124*–6–124*–6–12
A
800800
900900900
100010001000
112011201120
125012501250
140014001400
160016001600
B
8001000
800900
1120
90010001250
100011201400
112012501600
125014001800
160018002000
C
250250
250250250
280280280
280280280
315315315
315315315
315315315
D, DA
110110
120120120
140140140
160160160
160180180
180200200
220220250
E, EA
210210
210210210
250250250
300300300
300300300
300350350
350350410
H
400400
450450450
500500500
560560560
630630630
710710710
800800800
HD
16001600
180018001800
200020002000
225022502250
225025002500
250028002800
280028002800
L
20852295
208522352405
229524652655
252527152915
271629203170
295032553505
319534853840
LC
23002510
230024502620
255027202910
283030203220
303032303480
327036203870
356038504260
FRA IP 44 IC 81 W7 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
19
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
S l i p R i ng I nduc t i on Mo to r s
FRAV type belongs to our general purpose F series,consisting of vertical, flange mounted (IM V1, IEC34-7) induction machines constructed on principleof variable modules. FRAV type is totally enclosed(IP 54, IEC 34-5), self cooled motor with air-to-water heat exchanger (IC 81 W7, IEC 34-6) and slip-ring rotor with permanently operating brushes withrotor circuit resistance for starting and speedcontrol. The range of rated powers as a function ofnumber of poles of the 6000 V, 50 Hz basic designmotors with class F insulation for S1 type duty asper IEC 34-1 operational conditions are shown onthe diagram below.
Main constructional features of the motors arerobust welded stator case, fabricated steel shields,labyrinth sealed bearings with grease disk, twosymmetrical inner air circuits with radial air ducts forboth directions of rotation, side mounted heatexchanger with brass tubes, two-layer stator windingwith strengthened turn-to-turn insulation, fabricated
steel terminal boxes of IP 55 protection grade withpressure relief membrane, 3-phase two-layer rotorwinding. Pt 100 resistance temperature detectorsare built in the stator slots and at the bearings.
On special request we build in additional sensors(microswitch, contact thermometer, vibrationsensor, speed sensor) and space heaters. Besidethe basic design we can deliver variants of specialelectrical (15 kV, 60 Hz, 6 terminals, two voltagelevel, even higher pole numbers than shown in thetable) and constructional (manual or motor drivenbrush-lifting device with short circuiting contacts,weather protected or pipe connection design)versions and variants meeting special requirementsand standards (low noise, high runaway speed,speed control with thyristor cascade, etc.). Oillubricated spherical roller bearings are applied forhigh axial loads and low-speed motors, or oillubricated slide thrust bearings for high-speedmotors.
OUTLINE DRAWING
FRAV type high voltageinduction motors
Type
400 L400 J400 H
450 L450 K450 H
500 L500 K500 H
560 L560 K560 H
630 L630 K630 H
710 L710 K710 H
800 L800 K800 H
Numberof poles
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4–124–124–12
4*–6–124*–6–124*–6–12
6–126–126–12
A
950950950
105010501050
115011501150
130013001300
140014001400
160016001600
180018001800
D
100100100
110110110
130130130
150150150
180180180
200200200
220220220
N
780780780
880880880
100010001000
112011201120
125012501250
140014001400
160016001600
P
900900900
100010001000
115011501150
125012501250
140014001400
160016001600
180018001800
E
210210210
210210210
250250250
250250250
300300300
350350350
350350350
LH
160017501900
170018502000
185020002200
200022002400
220024002650
240026502900
260029003150
L
194020902240
209022402390
224023902590
252027202920
272029203170
306033103560
326035603810
LC
215023002450
230024502600
249026402840
277029703170
307032203470
341036603910
361039104160
FRAV IP 44 IC 81 W7 / OVERALL DIMENSION OF MOTOR
* with slide-bearing block
FHAV, FRAV, FDAV, FWAV SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
13000
12000
11000
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IP 23, IM V1
20
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
S l i p R i ng I nduc t i on Mo to r s
Synchronous machines are traditional products ofCG. Nowadays our products involve salient polemotors and generators.
• Output range is 1–70 MVA.• Voltage level is 1–15 kV.• Pole numbers are 4 and more.
The machines are supplied in compliance with theapplicable IEC Standards, i.e. IEC 60034. Theelectrical design parameters of the generators areselected to minimize the harmonic content andtherefore to meet the requirements of IEC 60034-1for Telephone Harmonic Factor (THF). The mainmounting and coupling dimensions comply with IEC60072. Mounting arrangement are both horizontaland vertical.
The stator is similar to that described at inductionmachines (see: first page of General TechnicalInformation). The rotor has salient poles. The polesare either solid or laminated ones. In case oflaminated poles there are damping cage bars builtinto the pole shoes. In case of motors, these barsserve also as starting cage. They can be connectedtogether to create a complete cage system.
Fixing of the poles depends on the speed and size.For high speed low pole number machines we applyhammer head fixing, for lower speed medium sizedove-tails are common. For large size machines
General characteristics
Reference standards
Mechanical characteristics
there is steel yoke, and the poles are fixed to it bybolts. The bearings are roller or slide type,depending on speed and size.
• Static: static excitation takes the form of anexternal supply to a transformer/rectifiercombination and a DC output via resistor andchangover switch to the main rotor. This solutionis used for both generators and motors.
• Brushless: the standard brushless exciter is analternator with rotating armature and stationaryfield. The rotating diodes of the brushless exciterare connected in a single or double three-phasebridge configuration and are selected withelectrical and mechanical ratings according toactual requirements. Normally the diodes areprotected by surge suppressors. The exciter canbe extended by a permanent magnet pilot exciter.In case of generators an automatic voltageregulator, which is normally a panel mountedequipment is applied. When applying for motors,to avoid the high voltage on the diode bridgeduring starting, rotating thyristors are appliedwhich act as a short circuit across the excitationwinding, protecting the diodes and avoiding slipfrequency oscillating torques.
A special application of synchronous machine is thesynchronous condenser or compensator. This unit isnot connected to any mechanical equipment and itsreactive power is varied by adjusting its field current.
Excitation
Synchronous condenser
Synchronous machines
SH, SR, SD, SW SERIES
2Number of poles
4 6 8 10 12 14 16
Power
(kW)
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
3000–7000 V / 50 Hz, 60 Hz
IC 01, IP 23, IC 81W7, IP 54, IM B3, IM V1
Synch ronous Mach i nes
21
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Synch ronous Mach i nes
CG Electric Systems Hungary, former Ganz Electrichas had very long experience in manufacturinghydroelectric generators. Market segment of thehydroelectric generators and their associatedequipment is considered very important. Nearly all ofour equipments operate abroad (in India, Peru, NewSealand etc.) because of the Hungarian naturalendowments. In many cases water turbines havealso been supplied by a Hungarian firm, GanzMachinery Works.
The stator frame is a welded structure strengthenedwith inside radial and axial ribs. The stator frametakes up the weight of stator laminated body, bearingforces, the windings placed into the slots of thecore, and the different loads arising of short circuitsand different operational conditions, and transfersthem to the foundation. There are defined crosssection holes in the strengthening ribs of the frame.These holes ensure and define the flow of coolinggas. The mechanical strength of the windings’ end issecured by insulated rings, suitable inserts andthermo-shrinking ribbon bandages. The stator coreis ventilated by the means of radially arrangedventilating channels. There are 2 Pt 100 typethermometers between the layers of each phase inthe middle part of the windings, for measuring thewindings temperature. Circulation of the cooling airnecessary to transfer the loss arising in thegenerator is promoted by the ventilating effects ofthe rotor poles. The slip-rings and the brush holdersystem are placed over the upper combined bearing.Maintenance of the brushes can be made throughthe windows of the upper shield.
The rotor is made with salient poles. The poles arelaminated to decrease losses. In the pole shoes
Stator
Rotor
there are damping bars which are brazed to shortcircuiting (connecting) segments. Segments areconnected with flexible conductive parts betweenthe poles. These damping bars ensure good wavedamping effect. Pole coils are made of edge bendedflat copper plates, having good cooling conditions.Rotor windings is made with class F high qualityinsulation. The poles are fixed to the rotor rim withbolts. The rotor rim is made of 150 mm thick solidsteel cylinder. The rotor hub is connected to the rimwith ribs. On the bottom surface of the rim, thehydraulic rotor brake system is arranged. To ensurethe required GD² there is a flywheel connected to theupper part of the rim with ribs. The rotor hub isconnected to the shaft with keys. The upper thrustbearing is connected to the upper part of the forgedshaft.
The thrust bearing is self lubricating, natural oilcirculation type with oil to water coolers. Antifrictionmetal sliding surface is made of segments thatensures sliding contact with the very fine surface onthe bell shaped hub piece pulled onto the shaft.
The upper guide bearing is united with the thrustbearing, their oil system and cooler is a commonarrangement. Lower guide bearing is situated in aholding structure also with self lubricating circulationand with oil to water cooler. Temperature detectorsare used to control bearing temperatures inoperation. The bearing on the exciter side isinsulated from the earthed parts of the generator toavoid arising of the bearing currents. For abovereason the oil pipe connections are also insulated.
Generator bearings
Thrust bearing
Guide bearings
Technical description of ONvtype vertical hydro generator
ONv 2600L 30
• Rated output: 4007 kVA• Rated Current: 350 A• Rated frequency: 60 Hz• Rated power factor: cos F=0.9• Insulation class: F• Enclosure: IP 23• Rated speed: 240 rpm• Construction: IM 8221••
Standard: IEC 34Weight: 41,500 kg
22
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
For the raw and cement ball-mill twin drives slip-ringor other wound type rotor motors are used all overthe world. Ganz – first in the world – successfullybroke this tradition with double squirrel cage motorssupplied to Duna-Dráva Cement Company atBeremend.
This new solution is significantly cheaper also fromthe investment side compared to the traditionalsolutions. On one hand the double-cage motor issubstantially cheaper than the slip-ring motor – onthe other hand the costly starting equipment and theadherent short-circuiting switch together with thecontroller are not required. The usage of our solutiondue to the low operational and maintenance costsfurther increase the adaptability of this newequipment.
One of the basic condition of the physical realizationof the cement mill twin drives is the very carefuldesign of the speed-torque curves. This solutionguarantees safe starting of the mills, decreases themechanical oscillation during starting and duringoperation, too. After the successful tests BeremendCement Mills Co. decided a complete renewal-reengineering of their existing equipments and putinto operation all of the 12 motors supplied by GanzTranselektro at the beginning of 2002.
The three phase double-cage rotor asynchronousmotor is adequate for direct starting. It has acompletely closed stator with mounted air-to-air heatexchanger. The roller bearings are provided withautomatic greasing. There are intern built-in SKFVibrational Sensors. The stator winding has Fthermal class
Construction
VPI system insulation.
General application range
Advantages
Main constructional features of the first reference
There are Pt 100 winding thermometers provided.
• Power: 500 kW–2500 kW• Frequency: 50–60 Hz• Speed: 750–1800 rpm• Protection: IP 54• Cooling: IC 611 or other
• Low investment and service costs compared toslip-ring induction motors
• Simple, robust rotor construction• Long life expectancy• Minimum maintenance and service demand and
supervising characteristic• Advantageous starting conditions• Adequate for the driver of other similar
equipment
• Type: FTC 560K6• Power: 1400 kW• Voltage: 6300 V• Speed: 990 rpm• Frequency: 50 Hz• Nominal current (In): 153 A• Efficiency: 96.5%• Power factor: 0.87• Torque (Mn): 13500 Nm• Breakdown torque: 2.1 x Mn• Starting torque: 1.1 x Mn• Starting current: 4.9 x Mn• Protection: IP 54• Cooling: IC 611• Mass: 7500 kg
Double-cage rotorasynchronous induction motorsfor cement-mill drive
D o u b l e -cag e Mo t o r s
INDUSTRIA 2002GRAND PRIZE
INDUSTRIA 2002GRAND PRIZE
23
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
History of traction machines
Our company has been manufacturing electrictraction equipment since 1892. In 1893 Ganz beganto deal with three-phase electric traction machinesthrough the initiative of Kálmán Kandó. In 1898 thefirst three-phase small passenger tramway hauledby a 15 HP motor was commissioned on the shoresof the Lake Geneva at Evian Les Bains. In 1898 Ganzstarted the complete electrification of Tellina Valley inNorthern Italy. The electrified “Val Tellina” line wasopened in 1902. This was the first electrified mainline in Europe and the World’s first HV alternatingcurrent railway.
In 1923 the first single-phase 15kV 50Hz phase-converter-system locomotive was put into operation.
At the end of the 40’s new phase- and frequency-converter locomotives with BOCO axle layout weredeveloped.
In the 50’s DC drives become generally prevailing. Inthe frame of modernisation of Hungarian StateRailway new products have been developed.
In the 60’s Ganz manufactured a number of new3000 HP silicon-rectifier mono motor-drivenlocomotives (V43). These ones are still in service.
They were followed in the 70’s by 5000 HP semi-controlled thyristor-bridge powered locomotives(V63). Here motors with support bearings wereapplied in the direct axle-drive utilizing a specialGanz developed integrated gear box cover.
Since the beginning Ganz delivered motor-trains forrailways, as well as, motor-cars tram-cars trolley-buses for city public transport. Nowadays ourdriving motors – both DC and AC – for thesevehicles are designed to be supplied by most up-to-date electronic devices.
Ganz Transelektro’s new traction motors aresupplied in compliance with IEC 349 Standard.
Till now Ganz produced more than 30,000 tractionmotors.
Traction machines
24
Tr ac t i o n Mach i ne s
ET 423ET 423
BR 1464RXA3541
On board main generator
TG series
TG 800/1500/12 type on-boardmain-generator 800 kW,55/327/226 V, 1500 r.p.m.
DKF 410x55/16 type brushlessexciter 9.36/22.2 kW, 39/59 V,1500 r.p.m.
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
The construction and the operational characteristicsof the AC traction motors for trolleybus drive entirelymatches the running features and the connection tothe body-work requirements. Their design is verysimple and robust, and requires minimalmaintenance. The stator and rotor iron core islaminated, the stator is frameless type. The motor isconnected to the trolley body-work in almosthorizontal position at four legs through rubber logs.
The motor is of double insulation. The basic type isopen self ventilated, but it is possible to use airducts connecting them at the air in- and outlet.The ventilation is obtained by a shaft mounted radialfan, suitable for both sense of rotation. The bearingsare closed roller types, filled with grease, demandingno relubrication between two major overhauls.One of them is insulated to avoid bearing currents.The stator outlet cables come out through cableglands on the NDE shield and they are directly
connected to the inverter. The speed sensor andservo pump are fixed to the NDE shield.
The thermal class of the VPI insulation system is200 °C, the insulation is reinforced according to therequirements of PWM inverter. The design wascarried out with a 3D CAD system. The photosbelow show a complete traction motor and itsapplication, one of our outstanding projects whereour drive motors werebuilt in.
• Voltage: 424 V• Current: 270 A• Output: 165 kW• Speed: 1764 rpm• Frequency: 60 Hz• Power factor: 0.89• Max. speed: 3500 rpm
Rated data of motors
Asynchronous traction motorfor trolleybus drive
25
Tr ac t i o n Mach i ne s
Type
AT1 33x25/4AT1 30x25/4AT1 22x25/4AT1 19x25/4
AT2 29x22/4AT2 22x22/4AT2 14x22/4
AT3 16x19.5/4AT3 9x19.5/4
LH
780750670640
690620540
540470
LC
987970890860
890820740
730660
L1
917890810780
810740660
650580
L
907880800770
800730650
640570
HC
410410410410
360360360
320320
H
205205205205
180180180
160160
GA
41414141
414141
4141
F
10101010
101010
1010
EA
72.572.572.572.5
72.572.572.5
72.572.5
E
70707070
606060
5050
DA
38383838
383838
3838
D
70707070
606060
5050
CB
28.528.528.528.5
252525
2525
AC1
500500500500
440440440
390390
AC
434434434434
380380380
340340
P (kW)
200160125100
125100
50
5025
AT IP 23 / OVERALL DIMENSION OF MOTORSFOR GENERAL TRACTION APPLICATIONS
EXPLODED VIEW
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
Reference list
Re fe r e nce L i s t
ALBANIA
ALGERIA
AUSTRIA
AZERBAIDJAN
BAHRAIN
BENIN
BOSNIA AND HERZEGOVINA
BRASILIA
BULGARIA
CHINA
CHILE
CZECHOSLOVAKIA
EGYPT
19771979198019851994
19941997199719971997199719981999
20112011
2008
1995
2010
20082009
19971997199719971997
19781978199919991999
1985199320082009
19972008
197519761976197719771977197819781978197919802010
19831986
1985
281011
12111111
11
3
1
1
43
11111
11332
35231
12
5133765411082
57
FVB 304/20FVB 304/20FVB 304/20FVB 304/20FVB 304/20
FHA 560K6FTA 400E4FTA 400E6FTA 400F6FTA 450E4FTA 560F4FTA 560F4FTA 400F4
FTA 450 Em6FTA 450 Es8
FHC 450 K2
FRA 800K6
FTA 630 Hm8
FTA 500 Em6FTA 500 Em6
FBAR 906L14FDA 450E4FTM 500F8FTM 630H10FTM 630K8
FOD 244/6FOD 246/6-8FTA 450E6FTA 450F6FTM 560G12
FVKO 716L16FVKO 906M16FTA 450H4FRC710Ll14FHC 450 K2
FTA 800H6FHC 450K2
FOD 308/6FOD 276/6FVB 307/8FHDz 275/2FBKz 297/2FBMO 716M6FBMO 716L6FBMO 716M6FOD 308/6FBMO 909M6FBMO 909M6FTC 560Hm6
FVE 566L12FVKO 566L6
440440440440440
147040040025080015001500300
900400
1000
4500
2360
16001600
3680128875018501500
250250/125630500950
970120075018001000
46001000
18006701800100020001000145010001800225022502100
585900
380380380380380
5005500550055005500550055005500
63006300
6300
11000
6000
60006000
66006600660066006600
60006000600060006000
60006000630060006000
120006300
600060006000600010000600060006000600010000100006000
60006000
295295295295295
98614769879861484148714871477
990740
2987
993
743
988988
5101781892713892
985985/740988989490
38436814824262987
9942987
99099074029802980990990990990990990991
590985
Ganz-Mávag, Pump StationGanz-Mávag, Pump StationGanz-Mávag, Pump StationGanz-Mávag, Pump StationGanz Gépgyár, Pump Station
AnsaldoAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria Monfalcone
Austrian ClientAustrian Client
GE Energy
Ansaldo Deutschland, Ore Pelleting Plant
SCB-Lafarge
Tvornica Cementa Kakanj, Heidelberg Cement PlantTvornica Cementa Kakanj, Heidelberg Cement Plant
Richel Ltd., Cime Sa. Cement PlantRichel Ltd., Cime Sa. Cement PlantRichel Ltd., Cime Sa. Cement PlantRichel Ltd., Cime Sa. Cement PlantRichel Ltd., Cime Sa. Cement Plant
Transelektro, DewnjaTranselektro, DewnjaAnsaldo Deutschland (Krupp), Assarel Copper MineAnsaldo Deutschland (Krupp), Assarel Copper MineAnsaldo Deutschland (Krupp), Assarel Copper Mine
EGI, Da-Dong Power PlantEGI, Da-Dong Power PlantAnsaldo Deutschland (KHD)EGI, Da-Dong Power PlantShenzen Flyu Co.
Ansaldo Deutschland, Cemento MelonGE Energy
TranselektroTranselektroTranselektroTranselektroTranselektro, Sigma (Lutin)Transelektro, Sigma (Lutin)TranselektroTranselektroTranselektroTranselektroTranselektroPSP - CEZ
Ganz-Mávag, Esna Pumping StationGanz-Mávag, Ghamaza Pumping Station Ganz-Mávag,
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
26
Re fe r e nce L i s t
1987198819891989198919891989199019951999199919991999199919991999199919992000200020002000200020002009201020102010
200320032003200320032003200420052006200720072008200920092010201020102011201120112011
19771977198019801980198019811981198119811981198119821982198319831983198319831983198319841984
FRANCE
GERMANY
46615666661221112112126111622
1111112342228154327191118122
22221122211122111221111
FVER 566L10FVEZ 566V12FVEZ 909V14FBM 569M6FVEZ 566M12FVEZ 566V12FVEZ 566V12FVKZ 716E18FTMV 560K10FTA 450E6FTA 450F4FTA 450G6FTA 500F6FTA 630H6FTA 630K6FTA 710H6FTA 710K6FTA 560F6FBAO 909V6FTA 450Ex4FTA 500Fs6FTA 500Fx4FTA 800Ht8FTA 800Ku6FTA 560Fs6FVM 630Kz4FVM 909E14FVM 909E14
FTA 560Em6FTA 450Ft6FTA 450Es6FTC 630Km6FTA 710Ls6FHC 450K2FHC 450K2FHC 450K2FHC 450K2FHC 450K2FVMZ 906E20FHC 450K2FHC 450K2FTA 560Fm6FHC 450K2FTC 560 Km6FRC 500 Ks4FHC 450K2FRC 500 Ks4SRGb 500 Ht6FRA 630 Ht4
FHA 274/6FHA 275/6FBA 566S8FBDO 566L4FBK 566L4FBK 566L6FBA 566L4FBA 566M4FBA 716M8FBA 716S6FBA 906S12FBK 566M6FBA 566L6FBA 716M6FBA 566L8FBA 566L8FBA 566M6FBA 566S8FBA 716L6FBA 906M12FBAR 906M12FBA 566M6FBA 906M8
8208002100825580762703450420800750500950290023804720357912504700315570500330035001250200011001200
2300650900220028001000100010001000100010801000100016001000180019001000180016804500
800800100016002250180020001500200020002000140018002500140016001400100031502800280014003150
6000600011000110006000600060006000110006300630063006300630063006300630066001100011000110001100011000110006600110001100011000
40004000400050005500600060006000600060005250600060005000600069069060006906905500
600060006300/36006300/36006300/36006300/36006300/36006300/36006300/36006300/36006300/36006300/360063006300/36006300630063006300/360063006000600063006300/3600
5924914249904914914923295919921483989989993992993991994994148398914857459939941500424424
1191118711899959942984298429842984298429629842984991298499414882984148812001487
9809807401485148598514751475740985494985985985740735985740985494494985743
Bayara Pumping Station Ganz-Mávag, Wadi El SaidaPumping StationGanz-Mávag, Shebab Pumping Station Ganz-Mávag, FostatPumping StationGanz-Mávag, Wadi El Saida Pumping StationGanz-Mávag, Wadi El Saida Pumping StationGanz-Mávag, Wadi El Saida Pumping StationGanz-Mávag, Wadi El Saida Pumping StationAnsaldo Middle-EastAnsaldo Industria Monfalcone, Sinai Cement PlantAnsaldo Industria Monfalcone, Sinai Cement PlantAnsaldo Industria Monfalcone, Sinai Cement PlantAnsaldo Industria Monfalcone, Sinai Cement PlantAnsaldo Industria Monfalcone, Sinai Cement PlantAnsaldo Industria Monfalcone, Sinai Cement PlantAnsaldo Industria Monfalcone, Sinai Cement PlantAnsaldo Industria Monfalcone, Sinai Cement PlantAnsaldo Ind. M., Egyptian Co. For Iron and Steel Prod.S.A.E.Ansaldo Lyon, Qena Cement PlantAnsaldo Lyon, Qena Cement PlantAnsaldo Lyon, Qena Cement PlantAnsaldo Lyon, Qena Cement PlantAnsaldo Lyon, Qena Cement PlantAnsaldo Lyon, Qena Cement PlantEgyptian Co. For Iron and Steel Products S.A.E.Kilo 57 Pumping Station East Suez SainaaTolombat Pumping Station
ASIRobicon FranceASIRobicon FranceASIRobicon FranceASIRobicon FranceASIRobicon France, VICAT - Blausac PlantGeneral ElectricGeneral ElectricGeneral ElectricGeneral ElectricGeneral ElectricASI FranceGeneral ElectricGeneral ElectricVICAT - St. Egreve PlantGeneral ElectricASI FranceASI FranceGE EnergyASI FranceASI FranceASI France
TranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektroTranselektro
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
27
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
1984198519851986198619861986198719871988198819881988198819881989198919891989198919901990199019901990199019911991199119911991199119911991199119911991199119911991199119911992199219921992199219921992199219921992199319931993199319931993199319941994199419941994199419941994199419941994199419941994199419941994
2111111111111111322211221111121222121112111111131121311312221111211111111111
FBA 906S12FBA 566M6FBAR 906L12FBDO 566L4FBA 566M6FBA 566S6FBA 566S8FBA 566L8FBA 906S12FBAR 906M12FBA 566L8FBA 566M12FBA 566M6FBA 716M10FBEO 566M4FBK 566M6FBA 566L4FBA 566L6FBA 566S6FBA 636L6FBA 566L8FBA 566M4FBA 566M6FBA 566S8FBK 566L6FBA 636L6FBA 566L4FBA 566L6FBA 566L8FBA 566S6FBA 716M10FBA 716M8FBA 903S12FBA 906M12FBA 906M6FBA 906S12FBA904M14FBMO 566L6FBMO 566M10FBMO 566M12FBMO 566M8FBMO 636L6FBA 566L10FBA 566L4FBA 566L6FBA 566L8FBA 566M6FBA 566S8FBA 906M8FBA 906V12FBDO 566M10FBMO 566M4FBA 566L8FBA 716M12FBAR 566L4FBD 566L6FBDO 566M12FBMO 636L6FBMR 635L6FHA 560J4FBA 566L10FBA 566L4FBA 636L6FBAO 563M8FBAR 903L10FHA 500H4FHA 630K6FHA 630K8FHA 710K6FHA 800L12FHC 560H4FHC 630H4FTA 400H4FTM 400H4FTM 450H4FTM 500H10
20001450355016001400125010001600200028001400710140016001250140022501800125025001400180014001000180025002250180015001250160020002000280040002000352012506305009001800120022501400140014001000355050006301250140014002250180050018002000150012003160250076036001800325022504000260025003600500500900630
6300/360630063006300/36006300/36006300/36006300/360063006300/3600600063006300/36006300/36006300/36006300/36006300/3600630063006300/3600630063006300/36006300/36006300/36006300/360063006300/3600630033006300/36006300/36006300/3600330060006300/36006300/360041606300/36006300/36006300/36006300/36006300/360063006300630063006300/360063006300/36006300/36006300/36006300/36006300630060006300/36006300/360063005000100006300/360063006300/36003300330063006300630063006300630063006300/36006300/36006300/36006300
4949854901485990985740735497494740492985592148098514839859859887401470990740985988148398588898559273849449498749450898759149274098959014829867409907397434945911480740494148398449298998514875901485988740593148499274299249614891490147914791483593
TranselektroTranselektroTranselektroGerman ClientTranselektroTranselektroTranselektroTranselektroTranselektroGerman ClientTranselektroTranselektroTranselektroTranselektroTranselektroGerman ClientTranselektroTranselektroTranselektroTranselektroGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientTranselektroGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientAnsaldo Deutschland, Berlin ZementwerkGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman Client
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
28
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
1994199419951995199519951995199519951995199519951996199619961996199619961996199619961996199619961996199619961996199619961996199719971997199719971997199719971997199719971997199719971997199719971997199719971997199719971997199719971997199719981998199819981998199819981998199819991999199919991999199919991999
1111211511111121221213211112112131121221212112121121211121111111211111111111
FTM 500H4FTM 560L8FBA 563S8FBA 566L4FBA 566S8FBA 636L6FBAR 906L10FBAR 906L10FDA 905V12FTM 400H4FTM 450H4FTM 500H4FBA 636L6FBA 906W16FBAR 903L10FBAR 906M12FHA 500E6FHA 500H4FHA 560E10FHA 560F4FHA 560F6FHA 560G8FHA 630K6FHA 630K8FHA 800L10FHA 800L12FTA 450E8FTA 500E8FTA 500F10FTA 630H6FTM 560L8FBA 636L6FBA 906L12FBA 906L12FBA 906V12FBAR 903L10FHA 500E6FHA 500H4FHA 560E8FHA 630K4FHA 630K6FHA 630K8FHA 710H6FHA 710H8FHA 710K12FHA 710K6FHA 710L12FHA 800L12FHC 710H4FRM 630K4FTA 450F8FTA 560E6FTA 560F6FTA 560G6FTA 630L8FTA 800K8FTM 400H4FTM 450H4FTM 560F10FBA 906L12FDA 500F6FHA 630H6FHA 630K8FHA 800L10FHA 800L12FTA 400E4FTA 450E4FTCV 400J6FBA 716M12FHA 560E6FHA 630K12FHA 710K12FHA 800L12FRC 710H4FRM 630K4FTA 500E4
1250900100022501000250030003600393050090012502500441036002750140018001200225016001000315022503600280050080050025001000250044784000500036001400180016002500315022505000/60004000200040001400280063003600450180014001250155032705009008004000950400022503600280047075043414002500140022402500550036001250
6300/36006300/360033006300/36006300/36006300/36006000660050006300/36006300/36006300/36006300/3600480033006600/33006300/36006300/36006300/36006300/360033006300/36006300/36006300/36006300/36006300/36006300/36006300/36006300/360060006300/36006300/360041606300630033006300/36006300/3600630010000/60006300/36006300/36006300/4160630063006300/36006300/36006300/3600630052504160630063006300400060006300/36006300/36006300/36006300600063006300/36006300/36006300/36006000600060006300/360063006300416010500600052506300
1485743740148273998859359349414791483148598844659349499314845911483992739992742595496739741590990-70074498859549549559399314847431489992742993/1192744494992494496149414898889939929928927451479148359149599199274259549614821482992494992494594495148714891485
German ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman Client
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
29
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
1999199919991999199919991999199919992000200020002000200020002000200020002000200020012001200120012001200120012001200120012003200320032003200320032003200420042004200420042004200420042004200420042004200420052005200520052005200520052005200620062006200720072008200820082008200820082008200820082008200820082008
1111112111111211111111111232211111131435111111111111111111111111111112221112111
FTA 560E4FTA 560F8FTA 560F8FTA 560G6FTA 630H6FTA 630K6FTA 710H4FTA 710L12FWC 560K10FBAR 906L12FDA 500E8FHA 500Fu4FRA 630L6FTA 400F6FTA 500E8FTA 500Ev4FTA 560E10FTA 710Hm6FTM 500H4FWC 560Hs4FTA 450E8FTA 500F10FTA 500F8FTA 500Fl8FTA 560E10FTA 560E8FTA 560Es8FTA 560Et6FTA 630Kt6FTA 630Ku4FTA 560Gl6FTA 560E8FTA 630Ll8FTA 630Ll8FTA 800Kt4FTC 500M2FOA 710Ls6FOA 710Ls6FBA 636L6FBA 904M14FBAO 906V10FRA 710Km6FTA 630Hs6FTA 800Hm6FTC 630Ks6FTC 500M2FTA 630Hs6FTA 560Em6FTA 560Es8FTA 560Es10FOA 710Ls6FDRZ 906V8FRC 630Kv4FTA 630Ku6FWC 560Hs4FTA 500Fs6FBA 906X 12FTA 500Fl8FTA 500Fm8FRA 710Km6FTA 630Ht6FTC 500Kl8FRC 800Kv4FRA 560Eu4FTA 560Em6FBAR 906 L12FTA 500 Es4FTA 560 Em6FTA 630 Kt6FTA 630 Ht6FTA 500 Em6FTA 630 Ht6FTA 800 Ks6FTA 800 Kl6FTA 800 Ks12FTA 500 Em6
22509001000125035525005000/4000140010003800100011502500315850112012003500125022405005006307001000125012501600200025001200125016801700710013002000200025003520514547003500790016001300350020001400112020006200384025002240800440080067047002250100065003000250035201800224025003350150032506000530030001400
63006000630063006600630060006300630063006000600030005000330010000416011000630060006300630063006600630063006600660066006000330033003300600060001100060006000630041606300660066006000100001100063006300630063006000600060006000600066006300550063006600110006000138005400600060006300630060004160416041606000660060006300
14857387449929929921487/14894945924957411482991987741148371299414851489739590744743593744743993992148599174574474414922977993993988508595993992993993297799299074359399374514909931490992496745741993993743179114839904961482989991992993990992992496990
German ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientRWE PowerRWE RheinbraunGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientRWE RheinbraunGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman Client
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
30
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
20082008200820082008200820082008200820082009200920092009200920092009200920092009200920092009200920092009200920092009200920092009200920092009201020102010201020102010201120112011201120112011
197919791979197919861999
1975197519751975197519751975197519751975197519751975197519751976197619761976
GREECE
HUNGARY
16341111222111111221121111122111131313114111121
1644611
1668222228431211531
FHA 710 Ku10FTA 560 Em10FTA 500 Fu4FTA 560 Em10FTA 630 Kl6FTA 710 Kt6FTA 500 Es8FTA 630 Hs6FTA 630 Hs6FTA 500 Ft6FTA 710 Ks6FDA 906 V12FTA 500 Em6FTA 630 Ht6FTA 450 Ew4FTA 800 Kl10FTA 560 Em6FTA 500 Es4FTA 560 Em6FTA 630 Hs6FRA 500 Ew4FTA 710 Kl6FTA 560 Em6FTA 500 Em6FTA 710 Hs10FTC 560 Ht4FRC 560 Kt4FTA 630 Ks6FTA 500 Es8FTA 450 Em6FTA 800 Kl6FTA 710 Ht6FTA 450 Fm6FTA 630 Ks6FTM 560 Fm6FTA 560 Gm8FTM 560 Fm6FTA 400 H6FHA 560 J4FTA 560 Em12FTA 560 Em6FRA 710 Ht4FTA 560 Fm6FTA 560 Eu8FTA 450Et4FTA 560 Es8FTA 560 Em6
FBDO566L4FBDZ 716L6FBDZ 906M10FDKZ 806W4FBDZ 716L6FDA 400E6
FOA 307/6FBAz 276/6FBM2c 276/6FOKv 406M4FBKz 308/2FODb 275/6FHB 566M4FOD 504L4FHBt 305/6FVBz 304/16FVBz 357/20FHB 305/6FOK 246/6FHDz 275/2FOK 275/8FB2c 1240/580/8FOA 307/6FOA 506L6FWK 326/14
2240135012501350280040001000350035001000400048001190290079035002240180014003500160043002240140022372800250025001050900640045006702500180090015004001500850224060001600115090013002500
11002100240057002100355
140080080020040005001250500150040020001800450100031510001400630580
60006000600060006000550063006300600060006000600060006000600060006300630063006300600060006300630011000600063006000600060006000600060005500550060006300600010000600063001000060005500660060006000
600060006000600060006600
60006000100006000600060006000360060006000600060003000600060005500600060006000
592712148971299199374099299099199449598898914835959891484989992148299099299059114861490993744994991992992991992743991984148449498914949897431786742990
14809905951485990984
99098599014702980985149014759903682909909852980738740990990421
German ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientGerman ClientZementwerk Berlin GmbH & Co. KGThyssenkrupp Fördertechnik GmbHGerman ClientGerman ClientGerman ClientMenzelMenzelMenzelMenzel
MHD, Kardia Power PlantMHD, Kardia Power PlantMHD, Kardia Power PlantMHD, Kardia Power PlantMHD, Kardia Power PlantAnsaldo Industria Monfalcone
Beremend Cement PlantBudapest (Csepel) Water UtilityBudapest Water UtilityERBE, Tisza Thermal Power PlantGagarin Thermal Power Plant, VisontaGanz-Mávag, Borsod Chemical WorksGanz-Mávag, Duna Oil RefineryGanz-Mávag, Ózd Iron WorksGanz-Mávag, Tisza Oil RefineryGanz-Mávag, Tisza Thermal Power PlantGanz-Mávag, Tisza Thermal Power PlantKelenföld Thermal Power Plant, BudapestMohács Wood Processing PlantTisza Chemical Works, SzolnokTisza Chemical Works, SzolnokDorog Coal MinesÉPBER, Bélapátfalva Cement PlantÉPBER, Bélapátfalva Cement PlantGagarin Thermal Power Plant, Visonta
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
31
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
1976197619761976197619761977197719771977197719771977197719771977197719771978197819781978197819781978197819781978197819781978197919791979197919791979197919791979197919791980198019801980198019801980198019801980198119811981198119811981198119811981198119811981198119811981198219821982198219821983198319831983
9223321334143311121112211132159111162211211113113321113221121421116134312112
FOD 506L6FHB 276/4FVB 275/6FHB 566M4FBDb 355/16FBDb 356/16FHK 245/2FOA 277/6FOD 305/8FBKz 308/2FBKz 308/2FVBz 384/20FOD 276/6FBDO 566L4FOA 307/6FOA 308/6FBDb 355/16FVB 277/8FOK 244/2FBA 566M12FOK 307/6FVM 560E10FVM 560S12FOA 307/6FOA 308/6FBDb 355/16FBAO 566S4FBDO 566L4FBDO 563M10FHK 246/2FHDz 275/2FBAO 566S4FBDO 566M10FHKz 245/2FOK 245/2FBDO 565L4FVE566M12FBDO 563M4FOA 307/6FBDO 566M10FHDWf 275/2FBM 566M8FHKz 275/2FBAO 563M8FBDO 566M10FBDO 566M10FOD 308/6FVK 566S8FBAO 569S4FBSO 569S4FVB 277/8FBM 566M8FBMO 566E12FBAO 566S4FOD 506L6FHK 245/2FBAz 276/6FBD 569L4FBMZ 569M4FBK 566S4FBDO 563M4FBDO 569S4FBDO 716M6FOA 277/6FOKv 406M4FVBz 304/16FBK 569S4FHK 275/2FBDO 566L6FVBz 384/20FBAO 566S4FOK 245/2FOD 305/8FOK 307/6FHBz 307/6FBK 566S6
500160010001250150018406304008004500450035006701250155021001500900400630150021050015502100150063014504001000100033050072072010005001000155040080010001100630500500180080050050090010002603306309008001800140012501000630150080020040063012501250350063050083015002300800
600060006000525060006000600060006000600060006000600060006000600060006000600060006000380380600060006000600060003000300060006000600060006000550060003000600060006000600030003000600060006000600010000100006000600060006000600030001000010000100006000300010000600030006000600010000630060006000600060006000600060006000
98014809801490370370297599074029801980296990148099099037074029706709705904909909903701480148559029702980149059529802935148049014859905902975740298074059559599073514851485740740493149099029709851480148014801485147599098514603681470297599029614802970740988985985
Ganz-Mávag, Borsod Chemical WorksGanz-Mávag, Duna Oil RefineryGanz-Mávag, Duna Oil RefineryGanz-Mávag, Komárom Oil RefineryHungarian Oil And Gas Company, AlgyõHungarian Oil And Gas Company, PusztaedericsChinoin Chemical Works, BudapestÉPBER, Bélapátfalva Cement PlantÉPBER, Bélapátfalva Cement PlantERBE, Tisza Thermal Power PlantERBE, Tisza Thermal Power PlantGanz-Mávag, Paks Nuclear Power PlantGanz-Mávag, Tisza Chemical WorksHejõcsaba Cement PlantHejõcsaba Cement PlantHejõcsaba Cement PlantHungarian Oil And Gas Company, AlgyõMecsek Coal Mines, KomlóBorsod Chemical Works, KazincbarcikaCrushing Machine Factory, JászberényERBE, Paks Nuclear Power PlantGanz-Mávag, Debrecen Sewage Water Treatment Pl.Ganz-Mávag, Debrecen Sewage Water Treatment Pl.Hejõcsaba Cement PlantHejõcsaba Cement PlantHungarian Oil And Gas Company, Szeged-AlgyõMátraalja Coal Mines, VisontaNitrochemical Industry Plant, FûzfõPécs Thermal Power PlantPécs Thermal Power PlantTisza Thermal Power PlantBeremend Cement PlantBorsod Chemical Works, KazincbarcikaBorsod Chemical Works, KazincbarcikaBorsod Chemical Works, KazincbarcikaGanz-Mávag, Balinka Mine Machines FactoryGanz-Mávag, Gyõr-Sopron Pump StationGanz-Mávag, Pécs Thermal Power PlantHejõcsaba Cement PlantMátraalja Coal Mines, GyöngyösOKGT Gas And Oil Transport CompanySzellõzõmûvek, Mecsek Metal MinesAjka Thermal Power PlantCsepel Paper Works, BudapestDunaújváros Paper WorksDunaújváros Paper WorksERBE, Tisza Thermal Power PlantGanz-Mávag, Tisza Chemical WorksMátraalja Coal Mines, GyöngyösMátraalja Coal Mines, GyöngyösMecsek Coal Mines, KomlóMecsek Coal Mines, PécsBélapátfalva Cement PlantBeremend Cement PlantBorsod Chemical Works, KazincbarcikaBorsod Thermal Power Plant, KazincbarcikaBudapest Water UtilityGanz Mávag, BudapestGanz Mávag, BudapestGanz-Mávag, Budapest Thermal Power PlantPécs Thermal Power PlantSzellõzõmûvek, Duna Iron WorksSzellõzõmûvek, Nagyegyháza MinesTaurus Rubber Factory, BudapestTisza Thermal Power PlantTisza Thermal Power PlantUTIBER, Emergency Water Supply of Ferihegy AirportAluminium Industry Factory, BudapestBélapátfalva Cement PlantGanz-Mávag, Paks Nuclear Power PlantMátraalja Coal Mines, VisontaPét Nitrogen WorksBélapátfalva Cement PlantERBE, Paks Nuclear Power PlantGanz MávagGanz Mávag, Budapest Thermal Power Plant
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
32
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
1983198319831984198419841984198419841984198419841984198519851985198519851985198519851986198619861987198719871987198719871987198719871987198719871987198719871987198719871987198819881988198819881988198819881988198819891989198919891989198919891989198919891989198919891989198919891990199019901990199019901990
123414711191361212321211113332833171552131111194113131112422129921131322222222
FBKz 566S4FBDO 716L6FBDO 566S4FDDT 356/12FOD 506L6FCDz 716L4FHKW 275/2FOA 305/8FOA 308/6FOB 406M12FBAO 566E6FOK 276/6FOA 277/6FHT 245/2FBTZ 297/2FCDZ 716L4FHBt 244/4FVAZ 719L8FBDO 566S6FBAO 566E8FHTZ 276/2FBDO 716V6FBA 566M8FBKO 716S16FHKW 275/2FHKz 245/2FBAO 456D6FBAO 456S6FBAO 456S6FBAO 566E6FBT 244/2FBKO 566S8FBAO 566E6FBAO 566E8FBDO 456D6FBDO 456S6FBDO 566L4FBDO 569S4FDDR 569L4FBDO 456S6FBDO 566L6FBA 566M8FHKZ 275/2FBK 566S6FOD 506L6FBDO 566E6FBDO 566S6-12FBDb 356/16FBDO 566S6FBDO 453S6-12FBDO 563M10FOK 276/6FBDR 456S4FHKZ 275/2FBDO 569S6FBDO 719S8FBKZ 566S4FBAO 716L6FBA 566M8FBDb 356/16FBDO 453S6FBDO 453S6FBK 453M4-6FVBz 384/20FBDO 563M4FCTZ 276/2FBDO 716L6FBMZ 459L4FVMR 569L8FBDO 456M8FBDO 566M8FCTZ 276/2FBAO 716M6FBDO 456S4FBDO 566M6FBDO 716L6
1370215010003200500250012507002100200500630800900250025005002000500/160400160021501000400125063025040032050055063050040025032010006301700320125010001100800500500500/1601840630500/160540630725110063010001240210010001840400400630/28025001000165019006001000500830165015506509001600
6000600063006300600063003000600060006300600060003000300060006300380100006000600060006000630060003000600060006000600060003000600060006000600060006000100001000060006000630030006000600060006000600060006000300060005500300010000100006000600063006000300030003000600030003000630010000105006000600030006300630063006300
148099014804959801485297074099029709859909852980298014851480738975/48073529759907403702975297098098598898529707389857359789781480147514809789907402980985980985975/480370985975/4805909901465298098874214859907403709809801478/9852951485298099293573773373329809901481989991
Ganz-MávagSzellõzõmûvek, Mecsek Coal MinesVác Cement PlantBélapátfalva Cement PlantBorsod Chemical Works, KazincbarcikaBorsod Ore Processing Factory, SajókeresztúrBorsod Thermal Power Plant, KazincbarcikaHejõcsaba Cement PlantHejõcsaba Cement PlantHejõcsaba Cement PlantMátraalja Coal Mines, VisontaPét Nitrogen WorksTaurus Rubber Factory, BudapestAjka Thermal Power PlantBánhida Power PlantBorsod Ore Processing Factory, SajókeresztúrCapital's Gas Utility, BudapestCapital's Water Utility, BudapestMány Coal MinesMátraalja Coal Mines, GyöngyösTisza Chemical WorksMecsek Coal Mines, PécsMecsek Metal Mines, PécsPét Nitrogen WorksBorsod Thermal Power Plant, KazincbarcikaBudapest Thermal Power PlantCoal Mines, GyöngyösCoal Mines, GyöngyösCoal Mines, GyöngyösCoal Mines, GyöngyösCoal Mines, KomlóCoal Mines, TatabányaCoal Mines, VisontaCoal Mines, VisontaCoal Mines, VisontaCoal Mines, VisontaDorog Coal MinesDuna Iron Works, DunaújvárosDuna Iron Works, DunaújvárosMátraalja Coal Mines, VisontaMetallurgy Factory, MiskolcSzellõzõmûvek, PécsThermal Power Plant, AjkaBudapest Power PlantChemical Co., KazincbarcikaCoal Mines, OroszlányCoal Mines, TatabányaMineral Oil Co., NagykanizsaOroszlány Power PlantOroszlány Power PlantPaper Mills, BudapestPét Nitrogen WorksSzellõzõmûvek, VeszprémAjka Power PlantDuna Iron Works, DunaújvárosDuna Iron Works, DunaújvárosHeating Plant, BudapestHejõcsaba Cement PlantMetal Mines, PécsMineral Oil Comp., NagykanizsaOroszlány Power PlantOroszlány Power PlantOroszlány Power PlantPaks Nuclear Power PlantPécs Power PlantPécs Power PlantVác Cement PlantWater Utility, BudapestWater Utility, BudapestBeremend Cement PlantBeremend Cement PlantERBE, Pécs Thermal Power PlantVác Cement PlantVác Cement PlantVác Cement PlantVác Cement Plant
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
33
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
19901991199119911991199119911993199319931994199419941994199419941994199519951995199619961997199819981999199920002000200020002000200320032003200320032004200420042004200520052005200620062007200720072007200820082009200920102011
19821983198319831983199720082010
2007200820092009
19811986
INDIA
IRAQ
IRAN
122422121142231215133233222352131221761155221142411111113221
186171111
1311
84
FBDO 716L6FBKO 456M6FBAO 716L6FDDe 354/16FVK 566M8FBDO 563E8FDTZ 297/2FBDO 456M8FBDO 566M8FTA 400H4FTC 450L4FRC 355H2FRC 400H2FVK 563S10FTC 450K10FTA 400H4FVK 563S10FTA 400H6FTA 400H4FDDZe 1126V16FTA 400H6FRA 500/2FDDZe 1126V16FTC 560K6FTA 400H4FTC 450L4FTC 560K6FTC 560K6FTA 400H6FTA 400Es4FTC 450K10FTA 400F6FTC 450L4FBAO 716L6FTA 800Ks6AT1 38x25/4-BAT1 38x25/4FTA 400Es4AT 1 38x25/4-BAT 1 38x25/4TG 8001500/12FTC 450Hs6FBDO 450M 8AT 1 38x25/4AT 1 38x25/4AT 1 46x25/4FTC 560Km6FBAO 716L6FRA 710Ks6FVM 566L12AT 1 38x25/4NFTA 450 Fs6FTA 400 H6AT 1 38x25/4NFRC 560 J2FHC 450 K2
FBDO 716S10FBDO 716L6FBDO 716L6FBDO 716M4FBDO 716S10FBDO 716S10FTA 800Kt6FTA 800Kt6
FTA 800Ht6FHC 450 K2FTA 500Fs6FTA 500Fs6
FVKZ 716V16FVKZ 716V16
19006302100125011005002500500830500330320600700400500700400500290040080029001400500330140014004006304002503302100540023516563023516580080050016516523515002100420058516563040016525001000
710180018001400180071048004800
56001000656750
13001300
6300600060006000600030006000630063006000630060006000315060006000315060006000600060006000600063006000630063006300600060006000600063006000630053042460005304247505250630042442453063006000660060004246000600042460006600
66006600660066006600660066006600
10500630033006600
60006000
9929809903687387342980733733147014882975297658758714705879841470371984297537199014701488990990984148058798614889909941760176414801764176415009917331764176411709939909934911764987984176429842987
5909909901485990590992992
9932987991990
366366
Vác Cement PlantChemical Co., KazincbarcikaHejõcsaba Cement PlantMineral Oil Comp. SzázhalombattaMineral Oil Comp. SzázhalombattaPécs Power PlantTatabánya Thermal Power Plant, BánhidaBeremend Cement PlantBeremend Cement PlantMátra Thermal Power PlantBeremend Cement PlantBudapest Thermal Power PlantBudapest Thermal Power PlantGanz GépgyárMátra Thermal Power PlantMátra Thermal Power PlantVértes Power PlantMátra Thermal Power PlantMátra Thermal Power Plant, VisontaNeuman & Esser, Zsana Underground Gas Storage of MOLMátra Thermal Power PlantPét Nitrogen WorksNeuman & Esser, Zsana Underground Gas Storage of MOLDuna-Dráva Cement Works, Beremend PlantMátrai Erõmû Rt.Duna-Dráva Cement Works, Beremend PlantDuna-Dráva Cement Works, Beremend PlantDuna-Dráva Cement Works, Beremend PlantMátra Power PlantMátra Power PlantMátra Power PlantMátra Power PlantDDC BeremendHOLCIM, HejõcsabaDDC VácGANZ TTGANZ TTMátrai Erõmû Rt. VisontaGANZ TTGANZ TTGANZ TTLábatlan Cement PlantBeremend Cement PlantGANZ TTGANZ TTGANZ TTHolcim Hejõcsaba Cement PlantHolcim Hejõcsaba Cement PlantASI SISTEMI HU KFT.Extren Kft.GANZ SKODA Zrt.Mátrai Erõmû Rt. VisontaMátrai Erõmû Rt. VisontaLicencia Ltd.Paks Nuclear Power PlantMVM
MHD, Neyveli Power PlantMHD, Neyveli Power PlantMHD, Neyveli Power PlantMHD, Neyveli Power PlantMHD, Neyveli Power PlantTranselektro, Neyveli Power PlantCGL-Italcementi, Zuari Cement PlantCGL-Italcementi, Zuari Cement Plant
German Client, Bazian Cement PlantGE EnergyMiddle Orbital Co., Old Badoosh Cement FactoryMiddle Orbital Co., New Hammam Cement Factory
EGI, Isfahan Power PlantEGI, Isfahan Power Plant
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
34
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
199019932009
2008
19931993199319931993199419941994199419941994199519951995199519951995199519971997199719981998199819991999199919991999200320052007200920102010
19932009
20072008
2011
1996
2008
2006
2009
19951995199519951995199519961996
IVORY COAST
ITALY
JORDAN
KAZACHSTAN
LEBANON
MEXICO
NIGERIA
OMAN
POLAND
PHILIPPINES
891
1
171214412211221111121011111111113111
11
22
1
2
5
1
2
14121122
FVKO 716L14FVKZ 716V16 FHC450 K2
FHC 450 K2
FHAV 710L22FHM 450H4FTA 400H6FTA 560H6FTA 630K6FHAV 450K6FHAV 450K6FTA 560H6FTA 710K6FTA 400H6FHA 500K8FHA 500E6FHA 560G8FTA 400H6FWA 400E6FTA 500K8FTA 500H6FTA 560J6FTA 400F4FTA 400F6FTMV 450F6FDA 500F6FHA 560E8FTA 400E4FTA 400F4FBAR 1006L14FTA 560F6FTA 630K6FHA 500F6FBAO 906W8FHCV 560Km8FHAV 710Kt8FTA 500Em6FRCV 710Kl14FRC 710Hl6
FVKO 716L12FRA 800Lm6
FRC 630Kt6FRC 630Kt6
FBAO 906W6
FRA 710K8
FHC 450 K2
FTA 800Km6
FTA 800 Kt6
FTA 400K4FTA 450H6FTA 450K12FTA 450K8FTA 630K6FTA 710K8FTA 450E6FTA 400E6
110013001000
1000
4601250315110022005605601600340030088016001000315510590110018003503154309501600500350441012502200950670014002 1001 2001 9004 450
14505700
22502250
6800
1500
1000
5400
5500
30170030140022003270700370
660060006000
6300
52006000600066005400660066005400540060002300360050006000350060004160670030006000600060005400660030006000660060006000630033009 0005 0006 0006 600
6006300
1000010000
6000
13800
6300
6600
6600
4160230041602300416041604160/23006600
4233672987
2987
26714789829949939889889909919858929887429829817421191992147698498999174314811476425994993991743755740991426997
495992
994994
994
893
2987
993
995
1780118959088811918941188/11871186
EGI, Shahid Radjai Power PlantEGI, Isfahan Power PlantMobin Petrochemical Co.
GE Energy
Ansaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo MilanoAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo MilanoHelmke Italia s a r lBrulliABB Italy, EndesaItalcementi - Hazemag EPR.Edison SpaENEL Power
Phosphate MinesNorth Region Cement - ASI Monfalcone
Phosphate Mine PlantPhosphate Mine Plant
Cimenterie Nationale S.A.L.
Ansaldo Deutschland, Sicartsa Steel Mills
GE Energy
Larsen & Toubro Ltd., Oman Cement Plant
Lafarge Ciment, Kujawy
Ansaldo Deutschland, Terefa Cement PlantAnsaldo Deutschland, Terefa Cement PlantAnsaldo Deutschland, Terefa Cement PlantAnsaldo Deutschland, Terefa Cement PlantAnsaldo Deutschland, Terefa Cement PlantAnsaldo Deutschland, Terefa Cement PlantAnsaldo Deutschland, Terefa Cement PlantAnsaldo Deutschland, Cebufa Cement Plant
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
35
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
1996199619961996199619961996199619961996
200720072007200720072008
197619782009
2008
199619982006
2005
2008
2008200820082008
2008
19972008
2008
2009
199720052009
1978197819781982198219821983198319831983198319831988
QATAR
ROMANIA
RUSSIA
SAUDI ARABIA
SCOTLAND
SIMBABWE
SUDAN
SWEDEN
SYRIA
TAIWAN
THAILAND
TUNESIA
TURKEY
1111212142
112221
331
1
181
1
1
2411
2
61
1
1
432
44122261111113
FTA 400F4FTA 450F6FTA 500F6FTA 500G8FTA 560E6FTA 560F6FTA 630K6FTA 630L14FTA 710K6FTA 710K8
FTA 500Fs6FTA 500Kt6FTA 710Kt6FTA 560Ft6FRA 710m6FTA 710Kl8
FHBz 307/6FHKz 275/2FTA 800 Kt6
FTA 630Ku4
FTA 400H6FRA 710K4FTA 710Hm8
FHCV 710Lv8
FTA 630Ks6
FTA 800Km6FTA 560Et6FTA 450Es6FTA 560Ev6
FHA 800Ls12
FTC 710L14FTC 710L14
ONV2600L30
FHC 450 K2
FRAV 630L6TC 330FTCV 630 LI12
FBDO 716V6FBDZ 566L4FBDZ 716L12FBDO 566L6FBDO 566S4FBDO 716S10FBDO 566L6FBDO 566S4FBDO 716S10FBDO 716V6FBDZ 716L12FHDZ 566L4 FBDO566L6 FBDO
28250079057015401300240079030002800
9001 1003 2001 3004 2002800
230010005500
3000
31531004400
2000
2500
480015008001150
2500
11201120
4008
1000
25003201085
2000130091095080071095080071020009101300950
6600660066006600660066006600660066006600
6 0006 0006 0006 0006 0006000
600060006600
6000
6000138006600
11000
6600
11000110001100011000
10500
63006300
6000
6300
55006806600
6000600060006000600060006000600060006000660060006000
1776119011918891192119311925041193893
990990990990990743
9902980995
1486
9851788895
755
993
992992992992
495
426426
240
2987
9911300493
9901480494985148059098514805909904941480985
Ansaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement PlantAnsaldo Deutschland, Cebufa Cement Plant
ASI France - FCB Ciment, Qatar Cement PlantASI France - FCB Ciment, Qatar Cement PlantASI France - FCB Ciment, Qatar Cement PlantASI France - FCB Ciment, Qatar Cement PlantASI France - FCB Ciment, Qatar Cement PlantTransorga Cem. AG - Intercem Eng. GmbH, Q.C.Plant
Ganz-MávagTranselektro, Suceava As.Lafarge Ciment, Medgidia
German Client, Ball mill
Ansaldo DeutschlandAnsaldo Industria MonfalconeI.S.C.O., Arabian Cement Company
Culligran Hydro Plant, VA -TECH HYDRO
German Client, Ball mill
Ansaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria MonfalconeAnsaldo Industria Monfalcone
German Client, Shredder
Gea EGI, Al ZaraAl Zara Power Station
Kirloskar Brothers LTD.
GE Energy
Ansaldo Industria MonfalconeSNCFTGhannouch P.P. - Alstom Bergeron - ASI France
MHD, Kangal Power PlantMHD, Kangal Power PlantMHD, Kangal Power PlantMHD, Catalagzi Power PlantMHD, Catalagzi Power PlantMHD, Catalagzi Power PlantMHD, Catalagzi Power PlantMHD, Catalagzi Power PlantMHD, Catalagzi Power PlantMHD, Kangal Power PlantMHD, Kangal Power PlantMHD, Kangal Power PlantMHD, Catalagzi Power Plant
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
36
Re fe r e nce L i s t
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com
198819881997199719971997199819991999199920032008201120112011
2008
199319981998200420062007200820092010
2011
2010201020102011
20102011
1975197619761978197819781980
20102010
TURKMENISTAN
UAE
UKRAINE
UNITED KINGDOM
USA
YUGOSLAVIA
ZAMBIA
374262111122131
2
121111111
1
1111
149
4612324
88
566S4 FBDO716S10 FTC800L14FTC 500H4FTC 500K4FTC 710K6FTA 630K8FTC 500H4FTC 500K4FTC 710K6FRC 710 LI12FHC 450 K2FBDz 566 L4FBDz 716 Ll12FBRO 909 X8
FHC 450 K2
FTA 400H6FTA 560E6FTA 800K6FTA 800K 6FTA 560E6FTA 800Kt8FTA 800Ks6FTA 800 Kl8FTA 800Ll8
FTA 800Ku6
FTA 630 Hm6FTA 500 ES6FDA 719M12FTC 630 F6
FHC 450 K2FHC 450 K2
FVB 355/16FBKz 296/2FOD 276/6FCDW 906W10FDKZ 806x4FVKR 1126L20FBDO 566M4
FRC 560Hu4FRC 500Hw4
8007101600120095030001690120095030009101000170012506450
1000
31517255250525017253700520045003000
3500
3500130018504584
10001000
17502000670520070002200920
25001300
6000600063006600660066006300660066006600600063006000600010000
6300
600063006300630063006000600066006000
6000
60006000110003300
63006300
6000600060006600660066006600
1100011000
1480590424148714829927411487148299249429871481493745
2987
985993991991993745992745994
992
991987494994
29872987
370298099059014802901480
14921492
MHD, Catalagzi Power PlantMHD, Catalagzi Power PlantEGI, Bursa Power PlantGanz Röck, Kangal Power PlantGanz Röck, Kangal Power PlantGanz Röck, Kangal Power PlantAnsaldo MilanoGanz Röck, Kangal Power PlantGanz Röck, Kangal Power PlantGanz Röck, Kangal Power PlantExtren Ltd., Kangal Power PlantGE EnergyEUASEUASEUAS
GE Energy
Ansaldo Deutschland (KHD)Ansaldo Ind. Monfalcone, Ras Al Khaimah Cement PlantAnsaldo Ind. Monfalcone, Ras Al Khaimah Cement PlantRas Al Khaimah Cement PlantRas Al Khaimah Cement PlantTransorga Cem. AG - Intercem Eng. GmbH, Sharjah C.F.Christian Pfeiffer Maschinenfabrik GmbH, Sharjah C.F.Transorga Cem. AG - Intercem Eng. GmbH, El BanaBinani Cements, Dubai
Christian Pfeiffer Maschinenfabrik GmbH, Ivano-Frankv. C.P.
CEMEX UKCEMEX UKCEMEX UKCEMEX UK
GE EnergyGE Energy
Transelektro, Obrenovac Power PlantTranselektro, Ljubljana Power PlantTranselektro, Obrenovac Power PlantTranselektro, Obrenovac Power PlantTranselektro, Obrenovac Power PlantTranselektro, Obrenovac Power PlantO. Bányagépgyártó V., Obrovac Power Plant
Konkola Copper MinesKonkola Copper Mines
YEAR
CLIE
NT
QUAN
TITY
TYPE
RATI
NG(K
W)
VOLT
AGE
(V)
SPEE
D(R
PM)
37
CG Electric Systems Hungary Zrt.
Rotating Machines Business Unit
Phone
Fax
Internet
H–1095 Budapest Máriássy u. 7.+36 1 483 6725
+36 1 483 [email protected]
www.cgglobal.com