热敏电阻器国际认证证书 · 2019. 11. 1. · CERTIFICATE OF CONFORMITY WITH FACTORY...

热热敏敏电电阻阻器器国国际际认认证证证证书书CCEERRTTIIFFIICCAATTEE OOFF RREECCOOGGNNIIZZEEDD NNEEGGAATTIIVVEE

TTEEMMPPEERRAATTUURREE CCOOEEFFFFIICCIIEENNTT TTHHEERRMMIISSTTOORR

汕头保税区松田电子科技有限公司SHANTOU FREE TRADE ZONE SONGTIAN ELECTRONIC TECHNOLOGY CO.,LTD

热敏电阻器安全认证标准及证书号：

序号国家安规标准证书号

1中国

（CQC）GB/T6663.1-2007 CQC19001213204

2美国/加拿大

(UL/CUL)UL1434 E474052

3德国

（ VDE）

EN60539-1：2017-01

EN60539-1：201640050168

GUTACHTEN MIT FERTIGUNGSÜBERWACHUNGCERTIFICATE OF CONFORMITY WITH FACTORY SURVEILLANCE

Shantou High-New TechnologyDev. Zone Songtian Enterprise Co., Ltd.

No. 9 Kejixi RoadGaoxin District

515041 SHANTOU CITY, GuangdongCHINA

ist berechtigt, für ihr Produkt /is authorized to use for their product

Widerstand mit negativem Temperaturkoeffizienten,direkt geheizt, temperaturabhängig

Thermistor, directly heated, negative step functiontemperature coefficient

die hier abgebildeten markenrechtlich geschützten Zeichenfür die ab Blatt 2 aufgeführten Typen zu benutzen /

the legally protected Marks as shown below for the types referred to on page 2 ff.

B REG F702 oder/or B oder/or VDE-REG F702 REG F702

Geprüft und zertifiziert nach /Tested and certified according to

DIN EN 60539-1:2017-01; EN 60539-1:2016

VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteZertifizierungsstelle / Certification

Aktenzeichen: 5000368-4791-0001 / 262185File ref.:Ausweis-Nr. 40050168 Blatt 1 Certificate No. PageWeitere Bedingungen siehe Rückseite und Folgeblätter /further conditions see overleaf and following pages

Offenbach, 2019-06-05

VDE Zertifikate sind nur gültig bei Veröffentlichung unter: http://www.vde.com/zertifikatVDE certificates are valid only when published on: http://www.vde.com/certificate

VDE Prüf- und ZertifizierungsinstitutGutachten mit Fertigungsüberwachung

Ausweis-Nr. /Certificate No.

40050168

Blatt /Page

2

Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder

Shantou High-New Technology Dev. Zone Songtian Enterprise Co., Ltd., No. 9 Kejixi Road, Gaoxin District,515041 SHANTOU CITY, Guangdong, CHINA

Aktenzeichen / File ref. Datum / Date

5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05

Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr. 40050168.This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with factory surveillance No.40050168.

Widerstand mit negativem Temperaturkoeffizienten,direkt geheizt, temperaturabhängigThermistor, directly heated, negative step functiontemperature coefficient

Typ(en) / Type(s)

MF72 5D-5XMF72 6D-5XMF72 7D-5XMF72 8D-5XMF72 10D-5XMF72 12D-5XMF72 15D-5XMF72 16D-5XMF72 18D-5XMF72 20D-5XMF72 22D-5XMF72 25D-5XMF72 30D-5XMF72 33D-5XMF72 50D-5XMF72 60D-5XMF72 3D-7XMF72 4D-7XMF72 5D-7XMF72 6D-7XMF72 8D-7XMF72 10D-7XMF72 12D-7XMF72 14D-7XMF72 15D-7XMF72 16D-7XMF72 20D-7XMF72 22D-7XMF72 25D-7X

Fortsetzung siehe Blatt 3 /continued on page 3

VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute A__________________________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0

Telefax +49 (0) 69 83 06-555



40050168

Blatt /Page

3




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05



Typ(en) / Type(s)

MF72 30D-7XMF72 33D-7XMF72 35D-7XMF72 40D-7XMF72 45D-7XMF72 50D-7XMF72 2.5D-9XMF72 3D-9XMF72 4D-9XMF72 4.7D-9XMF72 5D-9XMF72 6D-9XMF72 6.8D-9XMF72 7D-9XMF72 8D-9XMF72 10D-9XMF72 12D-9XMF72 13D-9XMF72 15D-9XMF72 16D-9XMF72 20D-9XMF72 22D-9XMF72 25D-9XMF72 30D-9XMF72 33D-9XMF72 35D-9XMF72 40D-9XMF72 45D-9XMF72 50D-9X



Telefax +49 (0) 69 83 06-555



40050168

Blatt /Page

4




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05



Typ(en) / Type(s)

MF72 60D-9XMF72 80D-9XMF72 120D-9XMF72 200D-9XMF72 1D-11XMF72 1.3D-11XMF72 1.5D-11XMF72 2.5D-11XMF72 3D-11XMF72 4D-11XMF72 5D-11XMF72 6D-11XMF72 6.8D-11XMF72 7D-11XMF72 8D-11XMF72 10X-11XMF72 12D-11XMF72 13D-11XMF72 15D-11XMF72 16D-11XMF72 18D-11XMF72 20D-11XMF72 22D-11XMF72 25D-11XMF72 30D-11XMF72 33D-11XMF72 35D-11XMF72 40D-11XMF72 45D-11X



Telefax +49 (0) 69 83 06-555



40050168

Blatt /Page

5




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05



Typ(en) / Type(s)

MF72 47D-11XMF72 50D-11XMF72 60D-11XMF72 80D-11XMF72 100D-11XMF72 120D-11XMF72 1D-13XMF72 1.3D-13XMF72 1.5D-13XMF72 2D-13XMF72 2.5D-13XMF72 3D-13XMF72 4D-13XMF72 4.7D-13XMF72 5D-13XMF72 6D-13XMF72 6.8D-13XMF72 7D-13XMF72 8D-13XMF72 10D-13XMF72 12D-13XMF72 15D-13XMF72 16D-13XMF72 18D-13XMF72 20D-13XMF72 22D-13XMF72 25D-13XMF72 30D-13XMF72 33D-13X



Telefax +49 (0) 69 83 06-555



40050168

Blatt /Page

6




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05



Typ(en) / Type(s)

MF72 35D-13XMF72 40D-13XMF72 47D-13XMF72 50D-13XMF72 60D-13XMF72 80D-13XMF72 120D-13XMF72 0.7D-15XMF72 1D-15XMF72 1.3D-15XMF72 1.5D-15XMF72 2D-15XMF72 2.5D-15XMF72 3D-15XMF72 4D-15XMF72 5D-15XMF72 6D-15XMF72 6.8D-15XMF72 7D-15XMF72 8D-15XMF72 10D-15XMF72 12D-15XMF72 15D-15XMF72 16D-15XMF72 18D-15XMF72 20D-15XMF72 22D-15XMF72 25D-15XMF72 30D-15X



Telefax +49 (0) 69 83 06-555



40050168

Blatt /Page

7




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05



Typ(en) / Type(s)

MF72 33D-15XMF72 35D-15XMF72 40D-15XMF72 45D-15XMF72 47D-15XMF72 50D-15XMF72 60D-15XMF72 80D-15XMF72 120D-15XMF72 0.7D-20XMF72 1D-20XMF72 1.3D-20XMF72 1.5D-20XMF72 2D-20XMF72 2.2D-20XMF72 2.5D-20XMF72 3D-20XMF72 4D-20XMF72 5D-20XMF72 6D-20XMF72 6.8D-20XMF72 8D-20XMF72 10D-20XMF72 12D-20XMF72 13D-20XMF72 15D-20XMF72 16D-20XMF72 18D-20XMF72 20D-20X



Telefax +49 (0) 69 83 06-555



40050168

Blatt /Page

8




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05



Typ(en) / Type(s)

MF72 22D-20XMF72 25D-20XMF72 30D-20XMF72 33D-20XMF72 35D-20XMF72 40D-20XMF72 45D-20XMF72 47D-20XMF72 50D-20XMF72 60D-20XMF72 0.7D-25XMF72 1D-25XMF72 1.3D-25XMF72 1.5D-25XMF72 2D-25XMF72 2.5D-25XMF72 3D-25XMF72 4D-25XMF72 4.7D-25XMF72 5D-25XMF72 6D-25XMF72 8D-25XMF72 10D-25XMF72 12D-25XMF72 15D-25XMF72 16D-25XMF72 20D-25X



Telefax +49 (0) 69 83 06-555



40050168

Blatt /Page

9




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05


Weitere Angaben siehe Anlage 200K vom 2019-06-05Further information see appendix 200K dated 2019-06-05__________________________________________________________________________________

VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteFachgebiet TL7Section TL7


Telefax +49 (0) 69 83 06-555



40050168

Beiblatt /Supplement




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05

Dieses Beiblatt ist Bestandteil des Gutachtens mit Fertigungsüberwachung Nr. 40050168.This supplement is part of the Certificate of Conformity with factory surveillance No. 40050168.


Fertigungsstätte(n)Place(s) of manufacture

Referenz/Reference30024868

SHANTOU FREE TRADE ZONE SONGTIANELECTRONIC TECHNOLOGY CO.,LTD.Songtian science and technologypark, Free trade zone515071 SHANTOUGuangdongCHINA

VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteFachgebiet TL7Section TL7


Telefax +49 (0) 69 83 06-555



40050168

Infoblatt /Info sheet




5000368-4791-0001 / 262185 / TL7 / CHM 2019-06-05


Genehmigung zum Benutzen des auf Seite 1 abgebildeten markenrechtlich geschützten Zeichens desVDE:

Grundlage für die Benutzung sind die Allgemeinen Geschäftsbedingungen (AGB) der VDE Prüf- undZertifizierungsinstitut GmbH (www.vde.com\AGB-Institut). Das Recht zur Benutzung erstreckt sich nur auf diebezeichnete Firma mit den genannten Fertigungsstätten und die oben aufgeführten Produkte mit denzugeordneten Bezeichnungen. Die Fertigungsstätte muss so eingerichtet sein, dass eine gleichmäßigeHerstellung der geprüften und zertifizierten Ausführung gewährleistet ist.Die Genehmigung ist so lange gültig wie die VDE-Bestimmungen gelten, die der Zertifizierung zugrunde gelegenhaben, sofern sie nicht auf Grund anderer Bedingungen aus der VDE Prüf- und Zertifizierungsordnung (PM102)zurückgezogen werden muss.Der Gültigkeitszeitraum einer VDE-GS-Zeichengenehmigung kann auf Antrag verlängert werden. Beigesetzlichen und / oder normativen Änderungen kann die VDE-GS-Zeichengenehmigung ihre Gültigkeit zueinem früheren als dem angegebenen Datum verlieren. Produkte, die das Biozid Dimethylfumarat (DMF) enthalten, dürfen gemäß der Kommissionsentscheidung2009/251/EG nicht mehr in den Verkehr gebracht oder auf dem Markt bereitgestellt werden.Der VDE-Zeichengenehmigungsausweis wird ausschließlich auf der ersten Seite unterzeichnet.

Approval to use the legally protected Mark of the VDE as shown on the first page:Basis for the use are the general terms and conditions of the VDE Testing and Certification Institute(www.vde.com\terms-institute). The right to use the mark is granted only to the mentioned company with thenamed places of manufacture and the listed products with the related type references. The place of manufactureshall be equipped in a way that a constant manufacturing of the certified construction is assured. The approval is valid as long as the VDE specifications are in force, on which the certification is based on,unless it is withdrawn according to the VDE Testing and Certification Procedure (PM102E).The validity period of a VDE-GS-Mark Approval may be prolonged on request. In case of changes in legal and /or normative requirements, the validity period of a VDE-GS-Mark Approval may be shortened.Products containing the biocide dimethylfumarate (DMF) may not be marketed or made available on the ECmarket according to the Commission Decision 2009/251/EC.The approval is solely signed on the first page.

File E474052 Vol 1 Auth. Page 1 Issued: 2015-01-30

Revised: 2019-01-22

FOLLOW-UP SERVICE PROCEDURE

(TYPE R)

COMPONENT - THERMISTOR-TYPE DEVICES

(XGPU2,XGPU8)

Manufacturer: SEE ADDENDUM FOR MANUFACTURER LOCATIONS

151081 (Party Site)

Applicant: SHANTOU HIGH-NEW TECHNOLOGY DEVELOPMNT ZONE SONGTIAN ENTERPRISE

CO LTD

(701335-001) 9 KEJIXI RD

GAOXINQU

SHANTOU

GUANGDONG 515000 CHINA

151081 (Party Site)

Recognized Co.: SAME AS APPLICANT

(701335-001)

This Follow-Up Service Procedure authorizes the above Manufacturer(s) to use the marking

specified by UL LLC, or any authorized licensee of UL LLC, including the UL Contracting

Party, only on products when constructed, tested and found to be in compliance with the

requirements of this Follow-Up Service Procedure and in accordance with the terms of the

applicable service agreement with UL Contracting Party. The UL Contracting Party for Follow-

Up Services is listed on addendum to this Follow-Up Service Procedure ("UL Contracting

Party"). UL Contracting Party and UL LLC are referred to jointly herein as "UL."

UL further defines responsibilities, duties and requirements for both Manufacturers and UL

representatives in the document titled, "UL Mark Surveillance Requirements" that can be

located at the following web-site: http://www.ul.com/fus. Manufacturers without Internet

access may obtain the current version of this document from their local UL customer service

representative or UL field representative. For assistance, or to obtain a paper copy of this

document or the Follow-Up Service Terms referenced below, please contact UL's Customer

Service at http://www.ul.com/aboutul/locations/, select a location and enter your request, or

call the number listed for that location.

The Applicant, the specified Manufacturer(s) and any Recognized Company in this Follow-Up

Service Procedure must agree to receive Follow-Up Services from UL Contracting Party. If

your applicable service agreement is a Global Services Agreement ("GSA"), the Applicant, the

specified Manufacturer(s) and any Recognized Company will be bound to a Service Agreement

for Follow-Up Services upon the earliest by any Subscriber of use of the prescribed UL Mark,

acceptance of the factory inspection, or payment of the Follow-Up Service fees which will

incorporate such GSA, this Follow-Up Service Procedure and the Follow-Up Service Terms which

can be accessed by clicking here: http://services.ul.com/fus-service-terms. In all other

events, Follow-Up Services will be governed by and incorporate the terms of your applicable

service agreement and this Follow-Up Service Procedure.

http://www.ul.com/fus

http://www.ul.com/aboutul/locations/

http://services.ul.com/fus-service-terms

File E474052 Vol 1 Auth. Page 2 Issued: 2015-01-30

Revised: 2019-01-22

It is the responsibility of the Recognized Company to make sure that only the products

meeting the aforementioned requirements bear the authorized Marks of UL LLC, or any

authorized licensee of UL LLC.

This Follow-Up Service Procedure contains information for the use of the above

Manufacturer(s) and representatives of UL and is not to be used for any other purpose. It is

provided to the Manufacturer with the understanding that it will be returned upon request

and is not to be copied in whole or in part.

This Follow-Up Service Procedure, and any subsequent revisions, is the property of UL and is

not transferable. This Follow-Up Service Procedure contains confidential information for use

only by the above named Manufacturer(s) and representatives of UL and is not to be used for

any other purpose. It is provided to the Subscribers with the understanding that it is not

to be copied, either wholly or in part unless specifically allowed, and that it will be

returned to UL, upon request.

Capitalized terms used but not defined herein have the meanings set forth in the GSA and the

applicable Service Terms or any other applicable UL service agreement.

UL shall not incur any obligation or liability for any loss, expense or damages, including

incidental, consequential or punitive damages arising out of or in connection with the use

or reliance upon this Follow-Up Service Procedure to anyone other than the above

Manufacturer(s) as provided in the agreement between UL LLC or an authorized licensee of UL

LLC, including UL Contracting Party, and the Manufacturer(s).

UL LLC has signed below solely in its capacity as the accredited entity to indicate that

this Follow-Up Service Procedure is in compliance with the accreditation requirements.

Bruce A. Mahrenholz

Director

Conformity Assessment Programs (CPO)

UL LLC

File E474052 Vol 1 Addendum To Page 1 Issued: 2015-01-30

Authorization Page Revised: 2019-01-22

LOCATION

151081 (Party Site)

(701335-001) SHANTOU HIGH-NEW TECHNOLOGY DEVELOPMNT ZONE SONGTIAN ENTERPRISE CO LTD

9 KEJIXI RD

GAOXINQU

SHANTOU

GUANGDONG 515000 CHINA

Factory ID: None

UL Contracting Party for above site is: UL GmbH

2246421 (Party Site)

SHANTOU FREE TRADE ZONE SONGTIAN ELECTRONIC TECHNOLOGY CO LTD

Songtian Science and Technology Park

Free Trade Zone

Shantou

Guangdong 515071 CHINA

Factory ID: A8

UL Contracting Party for above site is: UL GmbH

热敏电阻器国际认证证书 · 2019. 11. 1. · CERTIFICATE OF CONFORMITY WITH FACTORY...

Documents

Transcript of 热敏电阻器国际认证证书 · 2019. 11. 1. · CERTIFICATE OF CONFORMITY WITH FACTORY...