Certi˜ed product Nº: CP-16-16-101-2 SKATE TOTAL FLEXIBLE · TOTALFLEXIBLE BOLLARDS POLYURETHANE...
Transcript of Certi˜ed product Nº: CP-16-16-101-2 SKATE TOTAL FLEXIBLE · TOTALFLEXIBLE BOLLARDS POLYURETHANE...
https://youtu.be/siPI0qIn5tchttps://youtu.be/awUYdnZmCTc
Videos:
Nº: CP-16-16-101-2
Certi�ed product
C-430-TPUGRIS
C-430-TPU C-430-TPU-ROJRAL 3020
C-430-TPU-AZURAL 5005
C-430-TPU-AMA
C-430-TPU-VERRAL 6029
PARQUES Y JARDINES FÁBREGASGran Bretanya, 41 (Pol. Ind. Les Comes)08700 Igualada · BARCELONA (SPAIN)Tel. +34 93 805 11 25Fax +34 93 803 27 31
URBANCITY IBÉRICAMontduber, 346960 Aldaia · VALENCIA (SPAIN)Tel. +34 96 151 53 44Fax +34 96 151 75 65 [email protected]
TOTAL FLEXIBLEMod. C-430-TPUPOLYURETHANESKATE
BIKE LANE SEPARATOR
ENVIRONMENTAL ADVANTAGESWith each unit we avoid emitting 11,9 kg of CO2 into the atmosphere.“Skate green” allows to further reduce the carbon footprint.It is made with a mix of post-production and post-consumption PVC,with light organic polymers.
“SKATE” is part of a European project, “Life Future”, which provides a valuable tool to quantify our contribution in the mitigation of Climate Change.
SECURITYHigher re�ecting rate, absence of impact angle less than 50º.Optimal separation from 1,3 to maximum 2,3 m.
DESIGNBody, with re�ective areas, low relief to reduce the wear.
MAINTENANCEIt should be repainted periodically, when the re�ective paint is not visible.
OPTIONSTemplate to facilitate the maintenance operation.The anchor holes, are hidden by plugsinserted after the installation (Sold separately).
Wide and smooth surface, where the cyclist can support its foot in a stable way, to avoid accidents.
Ready to install by means of anchor plugs.The holes can be made without moving the lane separator.
Reduced Weight.Easy manipulation and installation.Made with recycled materials.Completely recyclable.
The re�ective area, is below the separator bodyof the lane, to avoid premature friction wear.
Anchor plugs. INOX A4 HIT-V-M12x150 mm - WS 9350 12x160 mm
Chemical plug.HILTI-HI-170 - Sika Anchor�x-1
Franjas laterales re�ectantes.
INSTALLATION MANUAL
DECELERATORS
BOLLARDS
DECELERATOR RE-1Mod. RE-1 505x405x50 mmMod. RE-1-FM 250x405x50 mmMod. RE-1-FH 250x405x50 mm
DECELERATOR RE-5-50x60Mod. RE-5-50x60 505x606x50 mmMod. RE-5-50x60-H 200x606x50 mmMod. RE-5-50x60-M 200x606x50 mm
DECELERATOR RE-3-50x60Mod. RE-3-50x60 505x606x30 mmMod. RE-3-50x60-H 200x606x30 mmMod. RE-3-50x60-M 200x606x30 mm
505
405
50
250 250
606
30
200 505 200
606
200 505 200
50
TOTALFLEXIBLE
BOLLARDS
POLYURETHANEMod. C-430-TPU PLUS
Nº: CP-16-16-101-2
Certi�ed product
It overcomes a �ex of 1500 cycles at 45º and 50 cycles at 90º, without damages (Report 16-31705992 issued by LGAI Technological Center). Classi�cation “E” of �re behaviour, according to UNE-EN 13501- 1:2007+A1:2010, and test according to UNE-EN 13238:2011 (Report 16/13069-1884 part 1 and 2 by LGAI Technological Center). Resistant to -50º according to UNE ISO 182 (Report 16/31707091 by LGAI Technolo-gical Center). In accordance with UNE EN 1176/1:2009
BIKE PARKING
ONAMod. A-03
Galvanized iron
BIKE LANE SEPARATORS
OPTIONAL
Bike lane separator with upper re�ective detachable painted.820 x 200 x 117 mm
MODELA-SKATE-G-16200 820
117
Bike lane separator with upper re�ective detachable painted.820 x 200 x 130 mm
MODELA-LOOP-G
Bike lane separator with upper re�ective detachable painted.820 x 200 x 127 mm
MODELA-SKATE-G-BCN
Bike lane separator with upper re�ective detachable painted.748 x 180 x 80 mm
MODEL SKATE-M-BCN
Bike lane separator with upper re�ective detachable painted.750 x 180 x 80 mm
MODELA-LOOP-M
200 820
130
200 820
127
748180
80
300 300
125
Bike lane separator with upper re�ective detachable painted.300 x 300 x 125 mm
MODELA-MID01-P
180 748
45
Bike lane separator with upper re�ective detachable painted.748 x 180 x 45 mm
MODELA-SKATE-P-BCN
BARCELONAMod. A-06 / Mod. A-06 INOX
Galvanized steel / stainless steel aisi 304
COPENHAGUENMod. A-04
Solid steel rods.Galvanized.
750180
80
200
750
40
200
100
812
192
100
1004
912
184
100
1089
1200
200
100
1400
704
130
193
Ø 18
135
135 Ø 200 Ø 200
Ø 11
Ø 100Ø 120
Ø 100Ø 120 Ø 120Ø 100
996
804
192
RIGID BOLLARDS
Mod. P41P
Sant FeliuPolypropylene
Mod. C-430
Pilona BCNPolypropylene
FLEXIBLE BOLLARDS
Mod. HITO H-75
Polyethylene
Mod. C-430-TPU
BCN BollardPolyurethane
Mod. C-430-TPU PLUS
BCN BollardPolyurethane
Mod. C-430-TPU 1200-PLUS
BCN BollardPolyurethane
Mod. C-430-TPU-BASE Basis to screw TPU bollards
Made in Polypropylene
Detachable option Detachable option Detachable option Detachable option