CERTIFICATE OF APPROVAL No CF 5204 - Warrington ... UK LTD International House, Millfield Lane,...

This certificate is the property of Exova (UK) Limited trading as Warrington Certification Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

Signed and sealed for and on behalf of Exova (UK) Limited trading as Warrington Certification

Paul Duggan Certification Manager

CERTIFICATE OF APPROVAL No CF 5204

This is to certify that, in accordance with

TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of

1

of 74

PYROGUARD UK LTD

International House, Millfield Lane, Haydock, WA11 9GA Tel: 01942 710720 Fax: 01942 710730

Have been assessed against the requirements of the Technical Schedule(s)

denoted below and are approved for use subject to the conditions appended hereto:

_____________________________________________________________________________________________________

CERTIFIED PRODUCT TECHNICAL SCHEDULE

‘Pyroguard T EI’ Insulating Fire Resisting Glass

TS 25 Fire Resistant Glass, Glazing Systems and Materials

Issued: 24th February 2014

Revised: 7th November 2017

Valid to: 23rd

February 2019

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5204

PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th

November 2017 Valid to: 23

rd February 2019

Pyroguard T EI Insulating Fire Resisting Glass

This Certificate of Approval relates to the fire resistance of Pyroguard UK Ltd. ‘Pyroguard T Insulating’ laminated glass products when used in the following applications, as defined in BS 476: Part 22: 1987 but using test results achieved against the following Standards - BS EN 1363-1 Fire Resistance Tests, BS EN 1364-1 Fire Resistance Tests on Doors, Shutters and Openable Windows or BS 1364-3 Fire Resistance Tests for Non Loadbearing Elements – Curtain Walling This product is approved on the basis of: a) Initial type testing b) A design appraisal against TS25 c) Product surveillance under BS EN ISO 9001: 2008 d) Audit testing e) Inspection and surveillance of factory production control

Glass Specification

Application

Fire Resistance Performance (mins) Page

No. Integrity Insulation

Pyroguard T EI30/18-1 or 18-2

Multiple paned Timber framed screens 30 30 6

Pyroguard T EI60/21-1 & 25-3 (inc.

V1 options)

Multiple paned Single and IGU Timber framed screens

60 60 8


Multiple paned Timber framed screens 30 30 10


Timber Doorsets 30 30 12


Multiple paned Single Steel framed screens 30 30 14


Multiple paned Steel framed screens 30 30 16





Pyroguard T EI90/32-2

Two paned Steel framed screens 60 60 22






Two paned Steel framed screens 90 90 28




Single glazed into steel doors 60 60 32




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI Insulating Fire Resisting Glass (continued)

Glass Specification Application Fire Resistance Performance (mins)

Page No.

Integrity Insulation

*Pyroguard T EI30/18-1VI or 18-2VI

Multiple panes of IGU in frame and in two Steel doors

30 30 34


Multiple panes of IGU in frame and in two Steel doors

60 30 36

Pyroguard T EI30/18-1VI or 18-2VI

Multiple paned IGU Timber framed screens

30 30 38


IGUs in multiple paned Timber framed screens

60 30 40

*Pyroguard T EW30/13-1 VI

IGUs in multiple paned Steel framed screens

30 30 42

Pyroguard T EW30/13-1 VI


60 30 44

*Pyroguard T EI30/13-1 VI


60 30 46

*Pyroguard T EI60/25-3VI

IGUs in multiple Steel framed screen 60 60 48

*Pyroguard T EW30/13-1 VI


90 30 50

*Pyroguard T

EI30/18-1 or 18-2VI


30 30 52

*Pyroguard T

EI90/32-2VI


60 60 54

*Pyroguard T

EI90/32-2VI


90 90 56



60 30 58

Pyroguard T SWS EI30/32-2

Four single Butt jointed panes in timber framed screens

30 30 60

Pyroguard T SWS EI60/40 and EI60/36-2

Three single Butt jointed panes in timber framed screens

60 60 62

Pyroguard T SWS

EI30/24-2

Three single Butt jointed panes in Steel framed screens

30 30 64


(inc. VI and VF variants)

Aluprof MB 78 EI Aluminium Screens 30 30 66




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI Insulating Fire Resisting Glass (continued)

Glass Specification Application Fire Resistance Performance (mins)

Page No.

Integrity Insulation

Pyroguard T EI30/18-1 or 18-2 (inc. VI variant)

Aluprof MB 78 EI Aluminium Doorsets 30 30 69

Pyroguard T EI30/25-3 and 25-3VI

Aluprof MB 78 EI Aluminium Screens 60 60 71

Pyroguard T EI30/25-3VI

Aluprof MB 78 EI Aluminium Doorsets 60 60 74

Note* The fire resistant pane of the IGU construction can be used as a single glazed pane in any previously fire tested or CERTIFIRE approved system. Note: In this case the product code will change.




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI Insulating Fire Resisting Glass

General Requirements

Where the glass is installed in a timber or steel framed screen, the orientation of the screen shall be no more than ±10º from the vertical. The edge cover to each pane is normally a minimum of 12 mm minimum. See test reports for exact dimensions. Options

Can be etched or sandblasted on one glass face. Self - adhesive films/foils may be applied to either glass surface. Insulating Glass Units (IGUs) may incorporate fixed aluminium blinds or Georgian bars within the cavity between the inner and outer glass layers. Note:

Where IGUs are approved and the fire resistant pane is glazed to the non-fire side, the non-fire resistant glass on the fire side can be float, toughened or laminated glass. When the fire resistant pane is glazed to the fire side the non-fire resistant glass on the non-fire side can be any pane that does not contain a flammable organic material i.e. float glass or toughened glass but not a laminated or painted glass unless supported by test evidence not contained in this CF. Where a fire resistant IGU is required it can be manufactured from any single size glass listed in this certificate for a given fire performance. The IGU should be glazed into any previously fire tested or CERTIFIRE approved system. Within this certification IGU airspace widths can vary different products. For larger airspace widths please contact the owner of this Certification. The fire resistant pane of the IGU construction can be used as a single glazed pane in any previously fire tested or CERTIFIRE approved system. For doors described in this Certificate then the glazed element can also be used in any previously fire tested or CERTIFIRE approved glazed insulated steel or timber framed door. Additional non fire rated glass can be laminated to the fire glass but must be installed to the fire side.




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in Hardwood framed screens for periods of 30 minutes integrity and insulation

For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved framing system utilising the following basic specification:

Framework from Hardwood (e.g. Oak) and 90 mm by 50 mm section. Transoms and mullions assembled by steel screws 10 x 135 mm.

Hardwood beads 33 mm by 20 mm fixed with 3.5 x 45 mm screws.

Glazing and frame details as describe in Efectis test report No 271-37090 and WF343243




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in Hardwood framed screens for periods of 30 minutes integrity and insulation (Continued) This Certificate of Approval relates to the sizes 18 mm thick Pyroguard T EI30/18-1 or 18-2 shown in Figure 1 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

Figure 1. Maximum Permitted Glass Dimensions

500 1000 1500 2000 2500 1495 1869

3000

2500

2000

1500

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

2495

Maximum Area 4.66m2

3119




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/21-1 or 25-3 glass (inc. VI variants) in hardwood frame for periods of 60 minutes integrity and 60 minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved timber framing system utilising the following basic specification:

Frame: from softwood with minimum density 530kg/m3 (see below and test report for

dimensions) Beads: from softwood with minimum density 530kg/m

3 (see below and test report for

dimensions) Glass edge intumescent seal: Kerafix ceramic tape: 20x4mm thick capped with Firestp

700 for single glazed option. 15x3mm capped with Flexilodice BS for VI option. Aperture liner: Odice Flexilodice. 20x3mm thick for single glazed option. 40x2mm for VI

option. Glazing and frame details as describe in WF379049




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/21-1 or 25-3 glass (inc. VI variants) in hardwood frame for periods of 60 minutes integrity and 60 minutes insulation (Continued) The timber framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of Pyroguard T EI30/21-1 or 25-3 or Pyroguard T EI30/21-1 or 25-3 VI shown in Figure 2 and 3 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

2600 3146

Glass Height

(mm)

Glass Width (mm)

Towards 0

Maximum Area 4.7m

2

1815

1500

Figure 2. Maximum Permitted Glass

Dimensions


2600 3250

Glass Height

(mm)

Glass Width (mm)

Towards 0

Maximum Area 4.2m

2

1622

1298


Dimensions

Pyroguard T EI30/18-1 VI or 18-2 VI




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in Softwood framed screens for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved framing system utilising the following basic specification:

Frame: from softwood with minimum density 450kg/m3 (see below and test report for

dimensions) Beads: from hardwood with minimum density 650kg/m

3 (see below and test report for

dimensions) fixed with 50 mm steel pins at 150 mm centres, 30° to glass Glass edge intumescent seal: Interdens, 15 mm x 2 mm Non-combustible setting blocks Glazing and frame details as describe in WF343243




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in Softwood framed screens for periods of 30 minutes integrity and insulation (Continued) This Certificate of Approval relates to the sizes 18 mm thick Pyroguard T EI30/18-1 or 18-2 shown in Figure 4 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

1555 1943

Glass Height

(mm)

Glass Width (mm)

Towards 0

Maximum Area 5.0m

2

3237

2590


Dimensions




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in timber Doorsets for periods of 30 minutes integrity and insulation

For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved framing doorset utilising the following basic specification:

Timber door leaf (softwood or hardwood with a minimum density of 477kg/m3) – 56

mm minimum thickness (Item 4 on drawing below)

Softwood or hardwood beads 33 mm by 25 with 17 mm by 10 mm rebate fixed with 1.7 mm x 50 mm pins at 150 mm centres fixed at 45° (Item 10)

2 mm thick by 15 mm wide Lorient Polyproducts Ltd LP1502 Interdens glazing

gaskets fitted between bead and glass (Item 9)

Glazing and doorset details as described in WF Test Report No. 356228




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in timber doorset for periods of 30 minutes integrity and insulation (Continued) This Certificate of Approval relates to the sizes 18 mm thick Pyroguard T EI30/18-1 or 18-2 shown in Figure 5 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

Figure 5 Maximum Permitted Glass Dimensions

841 1051

Glass Height

(mm)

Glass Width (mm)

Towards 0

2235

Maximum Area 1.88m2

2793




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in steel framed screens for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in IFT test report No 11-000423




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in steel framed screens for periods of 30 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of 18 mm thick Pyroguard T EI30/18-1 or 18-2 shown in Figure 6 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

1284

1868


1500 2000 2500 3000 3500 1264 1580 2594 3243

2500

2000

1500

1000

500

Glass Height

(mm)

Glass Width (mm)

Towards 0

1494

Maximum Area 4.16m2

1605

Maximum Area 2.36m2




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in steel framed screens for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in Efectis test report No 271-44217 and EFR-13-V-131496




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in steel framed screens for periods of 30 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of 18 mm thick Pyroguard T EI30/18-1 or 18-2 shown in Figure 7 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

1494

Maximum Area 2.37m2

1868


1500 2000 2500 3000 3500 1269 1586 2594 3243

2500

2000

1500

1000

500

Glass Height

(mm)

Glass Width (mm)

Towards 0

1284

Maximum Area 4.16m2

1605




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in steel framed screens for periods of 60 minutes integrity and 30 Minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in Efectis test report No 271-44217 and EFR-13-V-131496




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in steel framed screens for periods of 60 minutes integrity and 30 Minutes insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes 18 mm thick Pyroguard T EI30/18-1 or 18-2 shown in Figure 8 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1500 2000 2500 3000 3500 1269 2594 2680 1311

2500

2000

1500

1000

500

Glass Height

(mm)

Glass Width (mm)

Towards 0

1284

Maximum Area 3.44m2

1326

1543

1494

Maximum Area 1.96m2




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in steel framed screens for periods of 60 minutes integrity and 30 minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in IFT test report No 11-000423




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 glass in steel framed screens for periods of 60 minutes integrity and 30 minutes insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of 18 mm thick Pyroguard T EI30/18-1 or 18-2 shown in Figure 9 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

1284

1718


1264 1454 2594 2983

Glass Height

(mm)

Glass Width (mm)

Towards 0

1494

Maximum Area 3.83m2

1477

Maximum Area 2.17m2




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI 90/32-2 glass in steel framed screen for periods of 60 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in IFT test report No271-35263




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI 90/32-2 glass in steel framed screen for periods of 60 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes with 32 mm thick Pyroguard T EI90/32-2 shown in Figure 10 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1500 1600 1700 1800 1900 1875

5000

4000

3000

2000

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

Maximum Area 5.31 m2

2834

3543




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI 90/32-2 glass in steel framed screen for periods of 60 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI 90/32-2 glass in steel framed screen for periods of 60 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes with 32 mm thick Pyroguard T EI90/32-2 shown in Figure 11 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1000 1500 2000 3500 4000 2824 3530

2000

1750

1500

1250

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

Maximum Area 5.3 m2

1875




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI90/32-2 glass in steel framed screen for periods of 90 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI90/32-2 glass in steel framed screen for periods of 90 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of 32 mm thick Pyroguard T EI90/32-2 shown in Figure 12 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1000 1500 2000 3500 4000 2824

2000

1750

1500

1250

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI90/32-2 glass in steel framed screen for periods of 90 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI90/32-2 glass in steel framed screen for periods of 90 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of 32 mm thick Pyroguard T EI90/32-2 shown in Figure 13 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1500 1600 1700 1800 1900

5000

4000

3000

2000

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

Maximum Area 5.1 m2

2834

3401




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T Interfire EI 120/47-3 glass in steel framed screen for periods of 120 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in Efectis test report No 08-V-437




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T Interfire EI 120/47-3 glass in steel framed screen for periods of 120 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes with 47 mm thick Pyroguard T EI120/47-3 shown in Figure 14 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

1379

1724


1000 1100 1200 1300 1400

3000

2500

2000

1500

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

Maximum Area 3.67m2

2825




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/25-3 glass in steel framed doors for periods of 60 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel framing doors system which have achieved 60 minutes integrity and insulation in accordance with BS 476: Part 22: 1987, utilising the following basic specification:

Glazing and frame details as describe in IFT test report No 271 41119




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/25-3 glass in steel framed doors for periods of 60 minutes integrity and insulation The insulated steel framing doors system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of single glazed 25 mm thick Pyroguard T EI60/25-3 shown in Figure 15 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


761 913

Glass Height

(mm)

Glass Width (mm)

Towards 0

2329

Maximum Area 2.13 m2 2795




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in steel framed doors for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel framing doors system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in steel framed doors for periods of 30 minutes integrity and insulation (Continued) The insulated steel framing doors system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 35 mm thick Pyroguard T EI30/18-1 or 18-2 VI shown in Figure 16 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1000 1100 1200 1300 1400 1029 1286

3500

3000

2500

2000

1500

Glass Height

(mm)

Glass Width (mm)

Towards 0

2684

Maximum Area 3.45 m2 3355




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in steel framed doors for periods of 60 minutes integrity and 30 minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel framing doors system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in steel framed doors for periods of 60 minutes integrity and 30 minutes insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 35 mm thick Pyroguard T EI30/18-1 or 18-2 VI shown in Figure 17 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


700 800 900 1000 1100 1029

3500

3000

2500

2000

1500

Glass Height

(mm)

Glass Width (mm)

Towards 0

2684





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in hardwood frame for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved timber framing system utilising the following basic specification:

Intumecent seal between non fire glass and bead, 25 by 1.5mm Intumex (Odice) or (Flexpress 100 (Gluske) or 20 by 3 mm Fibrefrax FT paper (GLUSKE) or superwool(Odice).

Glazing and frame details as describe in Efectis test report No 09-V-481 and

WF343243




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in hardwood frame for periods of 30 minutes integrity and insulation (Continued) The insulated timber framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 35 mm thick Pyroguard T 30/18-1 or 18-2 VI shown in Figure 18 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1500 2000 2500 3000 3500 2585 3231

2500

2000

1500

1000

500

Glass Height

(mm)

Glass Width (mm)

Towards 0

1856

Maximum Area 4.8 m2

1485




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in hardwood frame for periods of 60 minutes integrity and 30 minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved timber framing system utilising the following basic specification:

Intumecent seal between non fire glass and bead, 25 by 1.5mm Intumex (Odice) or (Flexpress 100 (Gluske) or 20 by 3 mm Fibrefrax FT paper (GLUSKE) or superwool(Odice).

Glazing and frame details as describe in Efectis test report No 09-V-481 and

WF343243




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in hardwood frame for periods of 60 minutes integrity and 30 minutes insulation (Continued) The insulated timber framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 30 mm thick Pyroguard T EI30/18-1 or 18-2 VI shown in Figure 19 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1500 2000 2500 3000 3500 2585 2628

2500

2000

1500

1000

500

Glass Height

(mm)

Glass Width (mm)

Towards 0

1510


1485




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EW30/13-1 VI glass in steel framed Curtain Walling System with glazed panels for periods of 30 minutes integrity and 30 minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in Efectis test report No 007-CVB-RO495




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EW30/13-1 VI glass in steel framed Curtain Walling System with glazed panels for periods of 30 minutes integrity and 30 minutes insulation The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU with 13 mm thick Pyroguard T EW30/13-1 VI shown in Figure 20 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


500 1000 1500 2000 2500 1875

4000

3500

3000

2000

1500

Glass Height

(mm)

Glass Width (mm)

Towards 0

2928

Maximum Area 5.49m2

3660




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EW30/13-1 VI glass in steel framed system for periods of 60 minutes integrity and 30 minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EW30/13-1 VI glass in steel framed system or Isofire 45 system for periods of 60 minutes integrity and 30 minutes insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU with 26 mm thick Pyroguard T EW30/13-1 VI shown in Figure 21 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1400 1479 1494 1578

Glass Height

(mm)

Glass Width (mm)

Towards 0


2800

1391

1484

Maximum Area 2.19m2

2988




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EW30/13-1 VI glass in steel framed Curtain Walling System with glazed panels for periods of 60 minutes integrity and 30 minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019



500 1000 1500 2000 2500 1875

4000

3500

3000

2000

1500

Glass Height

(mm)

Glass Width (mm)

Towards 0

2928

Maximum Area 5.49m2

3660




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/25-3 VI glass in steel framed system for periods of 60 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/25-3 VI glass in steel framed system for periods of 60 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 40 mm thick Pyroguard T EI60/25-3 VI shown in Figure 23 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1500 1600 1700 1800 1900 1415 1769

5000

4000

3000

2000

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0


2820

3525




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EW30/13-1 VI glass in steel framed Curtain Walling System with glazed for periods of 90 minutes integrity and 30 minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019



500 1000 1500 2000 2500

3000

2500

2000

1500

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

2928





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in steel framed screens for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in steel framed screens for periods of 30 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 35 mm thick Pyroguard T EI30/18-1 or 18-2 VI shown in Figure 25 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

1372

1097


1100 1300 1500 1700 1900 1484 1618 1855 1494

3000

2500

2000

1500

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

2855

Maximum Area 3.7m2

2284

Maximum Area 2.04m2




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI90/32-2 VI glass in steel framed screens for periods of 60 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in IFC test report No576




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI90/32-2 VI glass in steel framed screens for periods of 60 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 35 mm thick Pyroguard T EI90/32-2 VI shown in Figure 26 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


500 1000 1500 2000 2500 1503 1879

1500

1400

1300

1200

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

1079

Maximum Area 2.03m2

1349




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI90/32-2 VI glass in steel framed screens for periods of 90 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:

Glazing and frame details as describe in IFC test report No576




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI90/32-2 VI glass in steel framed screens for periods of 90 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 35 mm thick Pyroguard T EI90/32-2 VI shown in Figure 27 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


500 1000 1500 2000 2500 1503 1804

1500

1400

1300

1200

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

1079

Maximum Area 1.95m2

1295




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in steel framed screens for periods of 60 minutes integrity and 30 Minutes insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel system utilising the following basic specification:





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 or 18-2 VI glass in steel framed screens for periods of 60 minutes integrity and 30 Minutes insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of IGU of 35 mm thick Pyroguard T EI30/18-1 or 18-2 VI shown in Figure 28 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions

2323

1097


1100 1300 1500 1700 1900 1294 1484 1319 1316 1509

3000

2500

2000

1500

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

Maximum Area 3.01m2

2284

Maximum Area 1.66m2

1116




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/32-2 SWS Butt Jointed Glass in hardwood frame for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved timber framing system utilising the following basic specification:

Hardwood frame with a density of 650 kg/m3 and 107 mm by 38 mm section. Assembled

in the construction with dowels and screws 10 x 160 mm every 900 mm. Double hardwood beads 35 mm by 20 mm fixed by screws 4 x 60 mm every 170 mm at angle of 30

0 degrees around the framework 30 x 2 mm Flexpress intumescent strip.

Glazing material Kerafix 2000 mineral fibre 20 x 3 mmat glazed edges. Fire Resistant

Sealant at butt joint between glass junction 30 mm wide.

80 by 6 mm Promatect H or Flammi 12(GLUSKE) setting blocks and Bottom edge clearance 6 mm, edge cover 14mm

Intumecent seal between non fire glass and bead, 25 by 1.5mm Intumex (Odice) or

(Flexpress 100 (Gluske) or 20 by 3 mm Fibrefrax FT paper (GLUSKE) or superwool(Odice)





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/32-2 SWS Butt Jointed Glass in hardwood frame for periods of 30 minutes integrity and insulation (Continued) The insulated timber framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of 32 mm thick Pyroguard T EI30/32-2 SWS shown in Figure 29 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1500 2000 2500 3000 3500 1830 2288

5000

4000

3000

2000

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

2900


3625




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/40-2 and EI60/36-2 SWS Butt Jointed Glass in hardwood frame for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved timber framing system utilising the following basic specification:

40 mm thick fire glass Pyroguard T EI60/40-2 SWS with 2 x 11 mm safety glass with 5.5.2 construction/2 x 6 mm intumescent interlayer/6 mm float glass, symmetrical glass construction with glazing beads on both side.

Alternatively constructed with 4.4.2 safety glass construction to give 36 mm thick fire

glass Pyroguard T EI60/36-2 SWS.





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/40-2 and EI60/36-2 SWS Butt Jointed Glass in hardwood frame for periods of 30 minutes integrity and insulation (Continued) The insulated timber framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of 40mm or 36 mm thick Pyroguard T EI60/40-2 SWS or Pyroguard T EI60/36-2 shown in Figure 30 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


500 1000 1500 2000 2500 1830

3000

2500

2000

1500

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

2900





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/24-2 SWS Butt Jointed Glass in steel partition system for periods of 30 minutes integrity and insulation. For this application the following conditions shall apply: The glass shall be glazed within a previously fire tested or CERTIFIRE approved insulated steel partition system utilising the following basic specification:

Glazing with a double bead system 15 x 20 mm on the fire side and 20 x 20 mm non fire side, screw fixed every 300 mm with 20 mm by 3 mm Flexlit Kerafix ceramic glazing (Gluske) tape. Thinnest beads on fire side.

The butt joints of the glazing were assembled side by side with 24 mm by 5 mm fire

resistant silicone. Along the top of all glazing, Kerafix Silicone (GLUSKE) was applied on the unexposed side.

Clearance between glass and frame was 7.5 mm. Edge Cover was 12.5 mm.





PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/24-2 SWS Butt Jointed Glass in steel partition system for periods of 30 minutes integrity and insulation (Continued) The insulated steel framing system shall have test evidence or be CERTIFIRE approved for the inclusion of apertures of the proposed dimensions. This Certificate of Approval relates to the sizes of Pyroguard T EI30/24-2 SWS shown in Figure 31 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.


1000 1200 1400 1600 1800 1300 1560

4500

4000

3500

3000

2500

1000

Glass Height

(mm)

Glass Width (mm)

Towards 0

3265


3918




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 and 18-2 (including VI and VF Variants) within Aluprof MB-78 EI aluminium framing screen system for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within an Aluprof MB-78 EI aluminium framed screen asdetailled diagrammatically below. Please consult the frame manufacturer for full specification of framing system. Glazing and frame details are as described in Efectis test report No’s. EFR-14-V-003556A, EFR-14-V-003554 and EFR-14-V-003555




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 and 18-2 (including VI and VF Variants) within Aluprof MB-78 EI aluminium framing screen system for periods of 30 minutes integrity and insulation This Certificate of Approval relates to the sizes of Pyroguard T EI30/18-1 and 18-2 (including VI and VF Variants)shown in Figure 32, 33 and 34 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

Glass Height

(mm)

1875

2800

Maximum Area 5.14m2

1470 1837 2385 2981

Glass Width (mm)

Towards 0

1500

3500


Figure 32. Maximum Permitted Glass Dimensions - Pyroguard T EI30/18-1 and 18-2




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 and 18-2 (including VI and VF Variants) within Aluprof MB-78 EI aluminium framing screen system for periods of 30 minutes integrity and insulation

Glass Height

(mm)

1625

2200

Maximum Area 3.55m2

1292 1615 2385 2981

Glass Width (mm)

Towards 0

1300

2750


Figure 33. Maximum Permitted Glass Dimensions - Pyroguard T EI30/18-1 VI and 18-2VI

Glass Height

(mm)

471

Maximum Area 2.84m2

1292 2866 3582

Glass Width (mm)

Towards 0

377

2200


Figure 34. Maximum Permitted Glass Dimensions - Pyroguard T EI30/18-1VF and 18-2VF




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 and 18-2 (including VI variant) within Aluprof MB-78 EI aluminium framed door systems for periods of 30 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within an Aluprof MB-78 EI aluminium framed doorset system as detailed diagrammatically below. Please consult the frame manufacturer for full specification and approved scope of doorset system. Glazing and frame details are as described in Efectis test report No’s. EFR-14-V-003552, EFR-14-V-003553 and EFR-15-V-003849




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI30/18-1 and 18-2 (including VI variant) within Aluprof MB-78 EI aluminium framed door systems for periods of 30 minutes integrity and insulation This Certificate of Approval relates to the sizes of Pyroguard T EI30/18-1 and 18-2 (including VI variant) shown in Figure 35 and 36 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

Glass Height

(mm)

2235

Maximum Area 2.90m2

1118 1221

Glass Width (mm)

Towards 0

2594

Figure 35. Maximum Permitted Glass Dimensions - Pyroguard T EI30/18-1 and 18-2

Glass Height

(mm)

2358

Maximum Area 3.40m2

1118 1342

Glass Width (mm)

Towards 0

3046

Figure 36. Maximum Permitted Glass Dimensions - Pyroguard T EI30/18-1VI and 18-2VI




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/25-3 and 25-3VI within Aluprof MB-78 EI aluminium framing screen system for periods of 60 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within an Aluprof MB-78 EI aluminium framed screen as detailled diagrammatically below. Please consult the frame manufacturer for full specification of framing system. Glazing and frame details are as described in Efectis test report No’s. EFR-14-V-003557A




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/25-3 and 25-3VI within Aluprof MB-78 EI aluminium framing screen system for periods of 60 minutes integrity and insulation This Certificate of Approval relates to the sizes of Pyroguard T EI60/25-3 and 25-3VI shown in Figure 37 and 38 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions.

Glass Height

(mm)

2800

Maximum Area 4.40m2

1470 1573

Glass Width (mm)

Towards 0

2996

Figure 37. Maximum Permitted Glass Dimensions - Pyroguard T EI60/25-3

Glass Height

(mm)

2200

Maximum Area 3.09m2

1312 1404

Glass Width (mm)

Towards 0

2354

Figure 38. Maximum Permitted Glass Dimensions - Pyroguard T EI60/25-3VI




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/25-3VI within Aluprof MB-78 EI aluminium framed door systems for periods of 60 minutes integrity and insulation For this application the following conditions shall apply: The glass shall be glazed within an Aluprof MB-78 EI aluminium framed doorset system as detailed diagrammatically below. Please consult the frame manufacturer for full specification and approved scope of doorset system. Glazing and frame details are as described in Efectis test report No’s. EFR-15-V-000202




PYROGUARD UK LTD

of 74 Signed D/007


Revised: 7th


rd February 2019

Pyroguard T EI60/25-3VI within Aluprof MB-78 EI aluminium framed door systems for periods of 60 minutes integrity and insulation This Certificate of Approval relates to the sizes of Pyroguard T EI60/25-3VI shown in Figure 39 below, when used in conjunction with the above system. The aspect ratio of the glass may be unlimited within these aperture dimensions. Glass

Height

(mm)

Maximum Area 2.64m2

1118

Glass Width (mm)

Towards 0

2358

Figure 39. Maximum Permitted Glass Dimensions - Pyroguard T EI60/25-3VI

CERTIFICATE OF APPROVAL No CF 5204 - Warrington ... UK LTD International House, Millfield Lane,...

Documents

Transcript of CERTIFICATE OF APPROVAL No CF 5204 - Warrington ... UK LTD International House, Millfield Lane,...