Ceramics NotesMrs. Jones’s Classes

Define what clay is: Clay is firm, plastic (capable of being

molded), fine-grained earth. Red clay comes form the southern U.S.

(no Glaciers) and Gray comes from the Northern U.S. (Glaciers).

Define the term ceramics:Ceramics is the general term for clay that has been fired to create a more durable surface.

Explain the difference between high fire and low fire clay. High fire clay is more durable, it can be

baked, put on the stove, microwaved, and washed in a dishwasher. The colors are usually less vibrant. It is fired at very high temperatures.

Low fire clay is more decorative with more bright colors available. It has to be hand washed.

Explain what the kiln is:The Kiln is an oven in which clay is fired to make it hard.

Explain what it means to fire clay: Firing clay is “baking”

it. Our clay is low fire

cone 06 and it is fired for 6 hours at about 2000°.

Describe ceramic glaze and what it does:

Ceramic glaze is a chemical compound containing glass that is used to decorate, waterproof, and protect clay objects.

Explain the difference between wet and leather hard clay: Wet clay is easy to model (mold and

manipulate) but hard to carve because it is so soft.

Leather hard clay is easy to carve but cracks and breaks if modeled.

Leather hard clay is also cooler and smoother to the touch.

Explain what Greenwareor Bone dry clay is: Greenware or bone dry clay is

clay that is completely dry but unfired.

It feels room temperature and it is very fragile.

It cannot be manipulated or modeled. If it is wetted it tends to melt.

It should not be sanded as it created dust, which is a safety hazard.

Explain what Bisqueware is:

Bisqueware is clay that has been fired once.

Explain what Glazeware is:

Glazeware is clay that has a glaze on it and has been fired.

Define and explain what wedging is:

Wedging is the process of removing air bubbles (that would explode in the kiln) from clay. The clay is kneaded like bread dough to twist out or pop the air bubbles.

Explain what slipping and scoring are: Slipping is adding very

wet clay to two pieces of clay leather hard that will be connected to each other.

Scoring is adding lines with a fettling knife to the clay (this creates more surface area to the clay).

It is done to make added clay stick together better.

Explain what a pinch pot is and how one is made: A pinch pot is a pot that is made out of a

single ball of clay. To make a pinch pot: roll a ball of clay,

push your thumb into the center of it, pinch starting at the bottom all the way round the ball, and continue pinching up the sides until you have formed the desired shape.

Explain what a coil is and how it can be used to create a pot:

A coil is a “snake” of clay that has been rolled on a table or in between your hands. Coils can be scored together in many ways to form a pot.

Explain what a slab is and how it can be used to create a pot: A slab is clay that has been rolled thin

using a rolling pin. Slabs can be cut into any shape and

slipped and scored together when they are leather hard.

Explain what a pressed mold is and how it can be used to make a pot: A pressed mold is a plaster (or other)

shape that a slab of clay is pushed into to the mold to make a specific shape.

Explain what throwing is and how it can be used to make a pot: Throwing is making a pot using a

potter’s wheel. Clay is: wedged, centered, opened,

raised, shaped, trimmed, reshaped and cut off of the wheel.

It is then allowed to dry and is centered, trimmed, footed, and smoothed.

Explain the dug out method and how it can be used to make a pot: The dug out method is hollowing out an

irregular solid shape so that it will not explode in the kiln.

Explain what a fettling knife does: A fettling knife cuts and scores clay.

Explain what wooden tools do: Wooden tools shape and smooth clay.

Explain what wire loop tools do: Wire loop tools cut away extra clay.

They are also used to trim thrown pots on the potter’s wheel.

Explain what a rolling pin does: Rolling pins flatten clay into slabs.

Explain what an elephant ear sponge does: Elephant ear

sponges are used to wet and smooth clay.

Explain what a rib tool does: A rib shapes and smoothes clay in

specific ways. They are also used to clean a potter’s wheel.

Explain what appliqué is: Appliqué is adding small cut out slabs to

the surface of a clay piece. Done to leather hard clay.

Explain what pressed texture is: Pressed texture is

when objects are pushed or rolled on clay to create a design or texture.

Done to wet clay.

Explain what sgraffito is: Sgraffito is a

design that is scratched (drawn) into clay using a sharp tool.

Done to leather hard clay.

Explain what piercing is: Piercing is cutting

out open shapes through the side of a piece. Done to leather hard clay.

Explain what lip refers to on a pot:

The lip is the open top of a pot.

Explain what foot refers to on a pot:

A foot what a pot sits on. It is added as a coil or trimmed into a pot

to keep it level after firing (the clay will sometimes warp while being fired and not sit flat if it does not have a foot attached to it.)

Explain what body refers to on a pot:

The body of the pot is everything in between the lip and the foot.

Explain what a gloss glaze looks like: Gloss glaze is very shiny.

Explain what a matte glaze looks like: Matte glaze is not

shiny.

Explain what an underglaze is: An underglaze is a

glaze that is applied to clay that has not been bisqued.

Explain an opaque glaze looks like: An Opaque glaze does not

allow and of the color of the clay to show through.

Explain what a transparent glaze looks like: A transparent glaze allows the color of

the clay to show through.

Explain what a translucent glaze looks like: Translucent glass allows

some of the clay color to show through.