Centro Trac System - Straight & Curved - TEGAN LIGHTING · System: Centro Trac 8’ (CT8). Centro...
9
Trac System - Straight & Curved Centro 415-504-3536 TG01 12/17 • • teganlighting.com 1 [email protected] • Category: Centro Straight and custom Curved Trac is a 12VAC & 24VDC system manufactured from a lightweight low profile aluminum extrusion. It can form complex shapes using the compre- hensive range of hardware available. There are two trac adaptors available for wall or ceiling mounting. The Twist & Click system allows the luminaires to be easily removed for cleaning or relamping. The luminaires click into the connector, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or alternatively, can be secured in place using two locking pins. Material: Machined aluminum. Finish: Brushed Aluminum (AL). System: Centro Trac 8’ (CT8). Centro End Cap (CEC). Square tube construction. 8’ (2.4m) Standard lengths. Field cuttable. Contact factory for curved Trac. Mounting: Centro Ceiling Anchor (CCA), Centro Ceiling Anchor – Cable (CCAC); Centro Ceiling Anchor – Stem (CCAS), Centro Universal Anchor (CUA) Centro Wall Cantilever with Power Feed (CWCPF), Centro Wall Mount Power Feed (CWMPF), Centro Sloped Ceiling Anchor w/72” (1.8m) stem (CSCA72), Centro Dual Mount Bracket (CDMB). Custom Centro Trac can be supplied in custom curved shapes (factory curved only). Curved Trac: Circles; Minimum radius is 18” (45.7cm). Tight or gentle curves. One time set-up fee per project. Designer to provide a CAD drawing. Wall or ceiling mount. Tegan Lighting will provide a system drawing with complete installation instructions. Contact the factory for a quote. Refer to the Centro Curved Trac Design Guide for ideas. Span: Maximum span between supports is 4’ (1.2m). Couplers: Centro Coupler (CC), Centro Adjustable Coupler (CAC), Centro T Coupler (C90TC). Connectors: Centro Trac Connector (CTC), Centro 90° Connector (C90C). Supplied as specified with selected Spotlight. Refer to Spotlight Specification Sheet for details. Isolator: Centro Isolator (CI). Power Feeds: Centro Power Bolt (CPB), Centro Power Canopy - Cable (CPCC), Centro Single Feed Canopy (CSFC), Centro Wall Power Anchor (CPWA), Centro Wall Cantilever with Power Feed (CWCPF). . Electrical: 300W Max. per circuit. NOTE: Centro Trac is either 24VDC for a dedicated LED luminaire/spot or 12VAC for MR-16 LED or Halogen. The two electrical operations utilize unique power supplies that cannot be combined on one run of Trac. NOTE: For dimming LED MR-16 lamps (Soraa) with 12VAC transformers, please refer to page 3 of our MR-16 LED Specsheet. Power Supply: Refer to 24VDC Driver Specsheet #13, 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for Power Supply options. Spotlights: Evo, Pico 1, Pico 3, Claro, Argent, Oculus, Arte-MR-16, Arte-AR-111/PAR-36, Tiro-SGS, Tiro- FGS, Mini-Kore Pendants, Luz (Centro Straight Trac Only). Installation: Refer to Installation Instructions for details. For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link. Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty. IP 12VAC 24VDC 300W MAX LED HALOGEN MR-16 LED AR-111 LED PAR-36 LED
Transcript of Centro Trac System - Straight & Curved - TEGAN LIGHTING · System: Centro Trac 8’ (CT8). Centro...
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
Category: Centro Straight and custom Curved Trac is a 12VAC & 24VDC system manufactured from a lightweight low profile aluminum extrusion. It can form complex shapes using the compre- hensive range of hardware available. There are two trac adaptors available for wall or ceiling mounting. The Twist & Click system allows the luminaires to be easily removed for cleaning or relamping. The luminaires click into the connector, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or alternatively, can be secured in place using two locking pins.
Material: Machined aluminum. Finish: Brushed Aluminum (AL).
System: Centro Trac 8’ (CT8). Centro End Cap (CEC). Square tube construction. 8’ (2.4m) Standard lengths. Field cuttable. Contact factory for curved Trac.
Mounting: Centro Ceiling Anchor (CCA), Centro Ceiling Anchor – Cable (CCAC); Centro Ceiling Anchor – Stem (CCAS), Centro Universal Anchor (CUA) Centro Wall Cantilever with Power Feed (CWCPF), Centro Wall Mount Power Feed (CWMPF), Centro Sloped Ceiling Anchor w/72” (1.8m) stem (CSCA72), Centro Dual Mount Bracket (CDMB).
Custom Centro Trac can be supplied in custom curved shapes (factory curved only). Curved Trac: Circles; Minimum radius is 18” (45.7cm). Tight or gentle curves. One time set-up fee per project. Designer to provide a CAD drawing. Wall or ceiling mount. Tegan Lighting will provide a system drawing with complete installation instructions. Contact the factory for a quote. Refer to the Centro Curved Trac Design Guide for ideas.
Span: Maximum span between supports is 4’ (1.2m).
Couplers: Centro Coupler (CC), Centro Adjustable Coupler (CAC), Centro T Coupler (C90TC).
Connectors: Centro Trac Connector (CTC), Centro 90° Connector (C90C). Supplied as specified with selected Spotlight. Refer to Spotlight Specification Sheet for details.
Isolator: Centro Isolator (CI).
Power Feeds: Centro Power Bolt (CPB), Centro Power Canopy - Cable (CPCC), Centro Single Feed Canopy (CSFC), Centro Wall Power Anchor (CPWA), Centro Wall Cantilever with Power Feed (CWCPF). . Electrical: 300W Max. per circuit. NOTE: Centro Trac is either 24VDC for a dedicated LED luminaire/spot or 12VAC for MR-16 LED or Halogen. The two electrical operations utilize unique power supplies that cannot be combined on one run of Trac. NOTE: For dimming LED MR-16 lamps (Soraa) with 12VAC transformers, please refer to page 3 of our MR-16 LED Specsheet.
Power Supply: Refer to 24VDC Driver Specsheet #13, 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for Power Supply options.
Spotlights: Evo, Pico 1, Pico 3, Claro, Argent, Oculus, Arte-MR-16, Arte-AR-111/PAR-36, Tiro-SGS, Tiro- FGS, Mini-Kore Pendants, Luz (Centro Straight Trac Only).
Installation: Refer to Installation Instructions for details. For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link.
Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.
IP 12VAC
24VDC
300WMAX LED HALOGEN
MR-16 LED AR-111 LED PAR-36 LED
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
Example: TG - CT8/2 - AL - CCA/3 - CC/2 - CI/0 - CPC/1 - CEC-BK/2
Tegan
CentroTrac /
Quantity3 Finish
MountingHardware /Quantity3
Coupler /Quantity3
Isolator /Quantity3
Power Feeds2 /Quantity3
Accessory /Quantity3,4
TG CT8/ AL
CCACCACCCASCUACWCPF6
CWMPF7
CSCA72CDMB
CCCACC90TC
CI CPBCPCCPWACSFC
Notes: 1 Centro Track is supplied in 8’ (2.4m) lengths (field cuttable). Specify quantity of 8’ (2.4m) lengths after slash. 2 For remote power supply, specify separately. Refer to Specification Sheet 13 for more detail. 3 List quantity of components required for a complete system. Specify after slash. 4 Required for proper electrical operation. 5 Custom factory curved Trac. See page 2 for details. Contact factory for a quote and lead-time.6 The Centro Wall Canopy Power Feed can function as power feed. If utilized in this manner, no additional power feeds are required.7 Mounts to a switch box (by others). Refer to drawing below. .
CEC-BLK
Centro End Cap(CEC-BLK)
Centro Universal Anchor(CUA)
Centro Power Canopy (CPC)
Centro Adjustable Coupler(CAC)
Centro Ceiling Anchor (CCA)
Centro Coupler
(CC)
Centro Single Feed Canopy
(CSFC)
Centro Isolator (CI)
Centro Ceiling Anchor Cable
(CCAC)
Centro Ceiling Anchor Stem
(CCAS)Centro Power Wall Anchor
(CPWA)
Centro - Components
Lightweight low profile aluminim extrusion. Square tube construction. Field cuttable. Available in Brushed Aluminum (AL) finish. 8’ (2.4m) Standard length. Maximum span between supports: 4’ (1.2m). Maximum total run: 50’ (15.2m). 300W Max at 12VAC & 24VDC, Surface Mount or Remote Power Supply. Refer to Installation Instructions for details.
17mm(11/16”)
8mm(5/16”)8mm
(5/16”)
17mm(11/16”)
17mm(11/16”)
8mm(5/16”)8mm
(5/16”)
17mm(11/16”)
Centro Trac LED low voltage lighting system can be supplied in customcurved shapes (factory curved only). Centro Trac can be formed into circles or random curves to beautifully complement any architectural design.Minimum radius is 18” (45.7cm). Designer to provide a CAD drawing for accuratequote. Wall or ceiling mount. Rated at 300W with remote mount PowerSupplies for LED and Halogen sources. Contact the factory for a quote.
Centro Trac (CT8) Centro Trac (CT8)Curved Trac
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
Centro Trac - Mounting
Ceiling Mount Anchor for Centro Trac. Available in Brushed Aluminum (AL)finish. Mount Ceiling Anchor every 48” (1.2m) (min.). Supplied withisolating washer. Refer to Installation Instructions for details.
Ceiling Anchor - Stem for ceiling mount Centro Trac with field cuttable rigid stem. Available in Brushed Aluminum (AL) finish. Supplied with 8’ (2.4m) of rigid stem and with an isolating washer. Mount Ceiling Anchor every 48” (1.2m) (min.). Contact factory for custom lengths; overall length must be specified in feet. Refer to Installation Instructions for details.
Universal Achor for Centro Trac mounting to any surface; wall or ceiling.Available in Brushed Aluminum (AL) finish. Mount Universal Anchor every48” (1.2m) (min.). Refer to Installation Instructions for details.
Ceiling Anchor - Cable for ceiling mount Centro Trac with aircraft cable.Anchor Available in Brushed Aluminum (AL) finish. Supplied with 8’ (2.4m)of cable and an isolating washer. Field adjustable. Mount Ceiling Anchorevery 48” (1.2m) (min.). Recommended for sloped ceiling applications.Refer to Installation Instructions for details.
Centro Ceiling Anchor (CCA) Centro Universal Anchor (CUA)
Centro Ceiling Anchor - Stem (CCAS) Centro Ceiling Anchor -Cable (CCAC)
52mm(2”)
ø19mm(3/4”)
32mm(1 -1/4”)
16mm(9/16”)
2.43m(8’)
19mm(3/4”)
52mm(2”)
ø19mm(3/4”)
32mm(1-1/4”)
16mm(10/16”)
6mm(1/4”)6mm
(1/4”)
52mm(11/16”)
8mm(5/16”)
15mm(5/8”)
2.43m(8’)
19mm(3/4”)
52mm(11/16”)
21.2mm(13/16”)
15mm(5/8”)
Sloped Ceiling Anchor for mounting Centro Trac. Tilts 90° and rotates 350°. Field-cuttable stem up to 72” (1.8m) long. Available in Brushed Aluminum (AL) finish. Refer to Installation Instructions for details.
Dual Mount Bracket for suspending two parallel runs of Centro Trac. Allows for two-circuit installation of multiple Spotlights. Separate Power Feeds are required per run). Available in Brushed Aluminum (AL) finish with Black (BL) polymer bracket. Refer to Installation Instructions for details.
Centro Sloped Ceiling Anchorw/72” Stem (CSCA72)
Centro Dual Mount Bracket w/8’ Cable (CDMB)
1.8m(72”)
ø19mm(3/4”) 32mm
(1 1/4”)
2.43m(8’)
51mm(2”)
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
Centro Trac - Couplers
Centro Coupler mechanically and electrically connects sections of CentroTrac for one circuit applications. Order Centro Isolator (CI) to isolate anygiven length of track for more than one circuit operation (300W Max.).Separate electrical feeds are required. Available in Brushed Aluminum (AL)finish. Refer to Installation Instructions for details.
Centro Adjustable Coupler mechanically and electrically connects sectionsof Centro Trac for one circuit applications. Order Centro Isolator (CI) toisolate any given length of track for more than one circuit operation (300WMax.). Separate electrical feeds are required. Up to 180° of adjustment,Available in Brushed Aluminum (AL) finish. Refer to Installation Instructionsfor details.
Centro Coupler (CC) Centro Adjustable Coupler (CAC)
8mm(5/16”)
17mm(11/16”)
23mm(7/8”)
17mm(11/16”)
8mm (5/16”)
17mm (11/16”)
25mm(1”)
17mm(11/16”)
23mm (7/8”)
14mm(9/16”)
Centro Trac - Mounting (cont’d)
T Coupler allows for layout of a 90° angle on a run of Centro Trac. Available in Brushed Aluminum (AL) finish. Refer to Installation Instructions for details.
Centro T Coupler (C90TC)
42mm(1 -5/8”)
75mm(2 -15/16”)
Centro Wall Cantilever Power Feed with aircraft cable. Used to cantilever the Centro Trac 36” (.9m) from the vertical surface. Field cuttable rigid stem. Required every 48” (1.2m) for structural support. Available in Brushed Aluminum (AL) finish. .
Centro Wall CantileverPower Feed (CWCPF)
25mm (1”)1.04m(41”)
Centro Wall Mount Power Feed creates is minimalist wall mount option for Centro Trac. To be mounted to a “switch” box (provided by others) instead of a 4” J-Box to achieve a clean appearance on the wall. Available in Brushed Aluminum (AL) finish.
Centro Wall Mount Power Feed (CWMPF)
17mm(11/16”)
23mm (7/8”)
700mm(27”)
12mm (.5”)
ø115mm(4.5”)
76mm(3”)
114mm(4 -1/2”)
23mm(1”)17mm
(11/16”)
23mm (7/8”)
Switch Box By Others
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
Centro Trac - Power Feeds
11mm(7/16”)
19mm(3/4”)
ø40mm(1 -1/2”)
28mm(1 -1/8”)
2.43m(96”)
ø115mm(4 -1/2”)
25mm(1”)
Connects Power Feed Cable to Centro Trac. Single circuit. Remote Power Supply. Order Centro Isolator (CI) to isolate any given length of track for more than one circuit operation (300W Max.). Additional electrical feeds are required. Available in Brushed Aluminum (AL) finish. Pack of two (2).Refer to Installation Instructions for details.
Connects power to Centro Trac discreetly through the wall with an iso-latingwasher. Single circuit. Remote Power Supply. Order Centro Isolator (CI) toisolate any given length of track for more than one circuit opera-tion (300WMax.). Additional electrical feeds are required. Available in Brushed Aluminum (AL) finish. Refer to Installation Instructions for details.
Covers standard 4” octagonal junction box. 8’ (2.43m) Power Feed Cable leads provided. Power Bolts included. Single circuit. Power wire ordered-separately - contact factory. Remote Power Supply. Order Centro Isolator(CI) to isolate any given length of track for more than one circuit operation(300W Max.). Additional electrical feeds are required. Available in Brushed Aluminum (AL) finish with clear (only) power cord. Refer to Installation Instructions for details.
Covers standard 4” octagonal junction box. Centro Trac mounts directly tothe power feeds on the canopy. Single circuit. Remote Power Supply.Use with Centro Ceiling Anchor (CCA) Mounting Hardware. Order CentroIsolator (CI) to isolate any given length of track for more than one circuitoperation (300W Max.). Additional electrical feeds are required. Avail-able in Brushed Aluminum (AL) finish. Refer to Installation Instructions for details.
19mm(3/4”)
11mm(7/16”)
28mm (1-2/16”)
ø41mm(1.5”)
12mm (.5”)13mm(1/2”)
700mm(27”)
12mm (.5”)
ø115mm(4.5”)
12mm(1/2”)
ø115mm (4.5”)
25mm (1”)
27mm (1 1/16”)ø115mm
(4 1/2”)
27mm(11/16”)
Centro Power Bolt (CPB) Centro Power Wall Anchor (CPWA)
Centro Power Canopy (CPC) Centro Single Feed Canopy (CSFC)
Centro Isolator electrically isolates sections of Centro Trac to allow separatecircuits on one run. Separate electrical feeds are required (300W Max.).Black finish only. Refer to Installation Instructions for details.
Centro Trac - Isolators
Black decorative caps (2 per pack) cover the ends of Centro Trac andprovides a clean finish to the end of a Trac run. Required for properelectrical operation. Black finish only.
Centro Isolator (CI) Centro End Cap (CEC-BLK)
40mm(1 -1/2”)
17mm(11/16”)
17mm(11/16”)
15mm(5/8”)
40mm(1.5”)
17mm (11/16”)
17mm (11/16”)
15mm(9/16”)
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
Connector for Centro Trac system. Supplied with Spotlight as specified. Brushed Aluminum (AL) finish. Refer to the Trac Design Guide for layout and specification assistance.
Connector for Centro Trac System. 90º Mounting. Supplied with Spotlight as specified. Brushed Aluminum (AL) finish. Refer to the Trac Design Guide for layout and specification assistance.
Centro Trac Connector (CTC) Centro 90° Connector (C90C)
25mm1”)
ø19mm(3/4”)
ø19mm(3/4”)
25mm(1”)ø19mm
(3/4”)
25mm(1”)
25mm (1”)
ø19mm (3/4”)
Centro Trac - Connectors
Surface mount, 300W integral 12V transformer with decorative cover and4’ (1.2m) power cable with power bolts for Centro Trac System connection only. Mount canopy to a standard 4” J-box.
Surface mount, 70W integral 24V driver with decorative cover and 4’ (1.2m) power cable with power bolts for Centro Trac connection only. Mount canopy to a standard 4” J-box.
Centro Trac - Power Supplies
10cm(3 -7/8”)
ø18cm(7”)
1.2m(4’)
10cm(3 -7/8”)
ø18cm(7”)
1.2m(4’)
Surface Mount Decorative 300W Magnetic Transformer - Centro Trac(ST-M-300W-120V-CT)
Surface Mount Decorative 70W Driver - Centro Trac(SD-M-70W-120V-CT)
The Twist & Click system allows the Spotlights to be easily removed.The Spotlights click into the jack plug socket, the threaded jacket thenscrews into position to lock the connection in place. Once fixed,the luminaires are free to rotate or can be secured using two locking pins.
CLICK
TWIST
Twist & Click System
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
Centro Trac - Spotlights
LED LED
LED
HALOGENMR-16 LED
HALOGENMR-16 LED
HALOGENMR-16 LED
HALOGENMR-16 LED
Claro Argent
Evo - Long Glare Shield
CLARO ARGENT
EVO - LGSEVO - SGS
Evo - Long Glare Shield
Oculus - Short Glare Shield
OSGS
Pico -1 Pico -3
PICO - 3PICO -1
HALOGENMR-16 LED
Evo - Angled Glare Shield
EVO - AGS
ARTE - MR-16
Arte - MR-16
HALOGENMR-16 LED
LED
Oculus - Long Glare Shield
OLGS
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
Centro Trac - Spotlights (cont’d)
Centro Trac - Pendants
Note: Contact factory if Centro Trac and Mini-Kore Pendant(s) are used on sloped ceiling.
MINI-KORE PENDANT
Mini-Kore Pendant/Benton Shade
Mini-Kore Pendant/Labyrinth ShadeMini-Kore Pendant/Vidro ShadeMini-Kore Pendant/Karton Shade
MINI-KORE PENDANT MINI-KORE PENDANT MINI-KORE PENDANT
Mini-Kore Pendant/Knitted ShadeMini-Kore Pendant/Cylinder Gem/No ShadeMini-Kore Pendant/Candelabra Gem/No Shade
MINI-KORE PENDANT MINI-KORE PENDANT MINI-KORE PENDANT
ARTE - AR-111/PAR-36 12VAC AR-111 or PAR-36
LED
TIRO - SGS TIRO - FGS
Arte - AR-111/PAR-36Tiro - Short Glare Shield Tiro - Frit Glass Shield
12VAC MR-16LED/HAL
12VAC MR-16LED/HAL
Trac System - Straight & CurvedCentro
415-504-3536
415-504-3536 TG01 12/17 • • teganlighting.com [email protected] •
LED
Centro Trac - Luminaires
LED LED
Luz Pendant Direct Luz Surface Direct Luz Pendant Indirect
LUZ PENDANT DIRECT LUZ SURFACE DIRECT LUZ SURFACE INDIRECT
