Centrilift FLEXPump Series Pumps - Baker Hughes · baker hughes incorporated and its affiliates...
Transcript of Centrilift FLEXPump Series Pumps - Baker Hughes · baker hughes incorporated and its affiliates...
Applications
Conventional oil fields
Unconventional oil and gas fields
Horizontal or deviated wells
Mature oil fields
Features and benefi ts
Patent-pending hydraulic designs
– Sets higher standard in pump
hydraulics with innovative
design concepts
Extended system flow range
– Adapts to changing well production
Improved head curve lift to shut off
– Improves gas handling
– Increases well drawdown
– Improves ultimate reserve recovery
– Improves uptime by keeping gas
in solution
Lower hydraulic thrust
– Extends operating range
Heavier wall construction in
pump components
– Extends pump run life
Enhanced ESP system efficiency
– Lowers OPEX
– Reduces power costs
The revolutionary Centrilift FLEXPump™ series
pumps incorporate innovative hydraulic design
concepts to expand the application range of
electrical submersible pumping (ESP) systems.
These effi cient, reliable pumps have the
industry’s widest operating range, providing
operators with the operational fl exibility
required in dynamic well conditions to minimize
ESP system changeouts and nonproductive
time while at the same time reducing operating
expenses. The high-performance FLEXPump
series pumps are specifi cally designed to
maximize production and ultimate reserve
recovery from conventional oil fi elds, low-fl ow
rate mature oil fi elds, and unconventional
resource plays in which the production index
declines rapidly.
Expand the operational fl exibility of your
ESP system
The FLEXPump series pump designs reduce
the total hydraulic thrust in both upthrust and
downthrust conditions, allowing the pumps
to operate effi ciently and reliably in a wider
operating range.
The extended operating ranges of these pumps
mean the ESP system is adaptable to changing
Centrilift FLEXPump Series PumpsImprove ESP operational fl exibility and performance in dynamic well conditions
OVERVIEW| bakerhughes.com
FLEXPump is a trademark of Baker Hughes Incorporated.
Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affi liates do not make any warranties or representations of any kind regarding
the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fi tness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the
information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE
LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.
© 2014 Baker Hughes Incorporated. All rights reserved. 37481 01/2014
well conditions as production rates change.
These pumps provide operational fl exibility over
radial compression stages and deliver extensive
fl ow ranges from a minimal number of pump
models in the FLEXPump series. Flow rates
range from 50 to 10,500 B/D.
The FLEXPump line expands the application range
of ESP systems and Baker Hughes application
engineers choose the right FLEXPump series
pump for each well’s specifi c requirements,
focusing on what’s most critical to maximize the
return on investment from every well.
Enhance the effi ciency of your ESP system
Baker Hughes engineers designed the FLEXPump
series pumps to deliver superior effi ciency across
the wider operating range, lowering OPEX—
including power consumption—over the life of
the well.
These pumps deliver continuously rising lift per
stage, allowing for better well drawdown, higher
effi ciency, and improved uptime by reducing
cyclic shutdowns. This also lowers the motor
operating temperature for increased run life
and superior overall system effi ciency. Greater
effi ciency gives you an OPEX advantage over the
life of the reservoir.
Improve the reliability of your ESP system
From existing assets and new production
zones like shale resource plays, tight reservoirs,
and deeper zones, where fl ow conditions can
change dramatically over short periods of time,
the FLEXPump series pumps improve reliability
by providing a pump that can deliver stable
operation in varying conditions. The FLEXPump
series pumps can handle thrust conditions more
effectively than legacy pump models, which
increases run life, reduces workovers, and
decreases downtime.
Wider stage vane openings reduce pump
plugging and give ESP systems enhanced solids
and gas-handling capabilities. Lower hydraulic
thrust extends operation in lower fl ow conditions
and heavier construction of pump components
increases uptime and reliability.
Contact your Baker Hughes representative today
or visit www.bakerhughes.com/FLEXPump to
learn more about how the FLEXPump series
pumps can deliver operational fl exibility in
dynamic well conditions while increasing
reliability and effi ciency.
Specifi cations for FLEXPump Series Pumps
Pump name 400FLEXPump3.2 400FLEXPump10 400FLEXPump17.5 538FLEXPump47 538FLEXPump80
Stage material Ni-resist Ni-resist Ni-resist Ni-resist Ni-resist
Stage geometry Volute Mixed fl ow Mixed fl ow Mixed fl ow Mixed fl ow
Abrasion resistance SND, SHD 1:7SSD Hybrid 1:3 /
1:9, SXDSSD, SND, SXD
SND, SHD 1:4,
SSD 1:3, SXDSSD 1:3, SXD
Shaft diameter 9/16-in. 11/16-in. 11/16-in. 7/8-in.7/8-in.
(no large shaft option)
Housing pressure 5,627 psi 5,627 psi 5,627 psi 5,627 psi 5,627 psi
Minimum fl ow 50 BPD 275 BPD 500 BPD 2,400 BPD 3,500 BPD
Maximum fl ow 500 BPD 1,625 BPD 2,600 BPD 6,000 BPD 10,500 BPD
BEP head 20 ft 36 ft 20 ft 50 ft 50 ft
BEP effi ciency 50% 65% 71% 71% 77%
BEP horsepower 0.10 BHP 0.33 BHP 0.35 BHP 2.64 BHP 3.85 BHP
OVERVIEW