CENTRIFUGAL PUMPS HEAVY DUTY INDUSTRIAL€¦ · engineered bearing housing heavy duty industrial...
Transcript of CENTRIFUGAL PUMPS HEAVY DUTY INDUSTRIAL€¦ · engineered bearing housing heavy duty industrial...
Distributed by…
Form 2595D May 2005As Tyco policy is one of constant improvement, we reserve the right to make specification changes without notice and without incurring liability.
HEAVY DUTY INDUSTRIALCENTRIFUGAL PUMPS
APPLICATIONS● Designed for heavy duty
industrial use including belt drive applications.
● General water transfer in processing plants, mines, construction sites and irrigation.
FEATURES● Heavy duty oil lubricated
taper roller bearings.● Australian designed and
manufactured.● Superior hydraulic design
& manufacturing methods produce significantly higher efficiencies for lower runningcosts and reduced maintenance
● Wide range of options.● Australia wide backup.● Heads to 160 metres● Up to 250 litres per second
discharge.
HEAVY DUTY INDUSTRIALCENTRIFUGAL PUMPS
GUIDE TO PERFORMANCE
Optional Mounting for HorizontalDischarge to either side.
Back-Pull-OutFeature
VOLUMETRIC FLOW RATE
A.B.N. 83 000 922 690A division of Flow Control Pacific Pty Ltd
Ph: 131 786e-mail: [email protected]
web: www.tycoflowcontrol.com.au
SOUTHERN
CROSS
VOLUMETRIC FLOW RATE
TOTA
L H
EAD
IN M
ETR
ES
L/SEC 3 4 5 6 8 10 20 30 40 50 70 100 150 200 300
M3/HR 10 20 30 50 100 150 250 500 1,000
USGPM 50 100 150 250 500 1,000 1,500 2,500 5,000
TOTA
L H
EAD
IN F
EET
100
80
6050
40
30
20
10
8
65
400
300
200
100
50
40
30
20
15
TOTA
L H
EAD
IN M
ETR
ES
L/SEC 3 4 5 6 8 10 20 30 40 50 70 100 150
M3/HR 10 20 30 50 100 150 250 500
USGPM 50 100 150 250 500 1,000 1,500
IGPM 50 100 150 250 500 1,000 1,500
TOTA
L H
EAD
IN F
EET
200
150
100
80
6050
40
30
20
15
600500400
300
200
150
100
50
IGPM 50 100 150 250 500 1,000 1,500 2,500
1450 R.P.M.(Nominal Speed)
65x40-315
65x40-250
50x32-200
50x32-160
150x 125-250
65x50-160 100x80
-160
100x65-200
80x50-200
100x65-315
65x40 -200
80x65-160
80x50-250 100x65
-250
125 x100 -315
125 x100 -250
125x 100 -200 125
x80-200
125 x80-250
125 x80 -31580x50
-315
50x32-160 65x50
-160
50x32-200
65x40-250
80x50-200
80x50-250
80x50-315
80x65-160
65 x 40 -200 100x65
-200
125x80-400
100x65-315
100x65-250
125x100-400
200 x150-315150x
125-250
200 x150 -400
200 x150 -500
150 x125 -315 250
x 200 -315
150 x125 -500
125x100-500
150x125-400
100x80-160
125x 100- 250
125x 100 -200 125
x80-200
125x80-250
125 x100 -315
125 x80 -315
65x40-315
2900R.P.M.(NominalSpeed)
SOUTHERN CROSS
SOUTHERN CROSS
ENGINEERED BEARING HOUSING
HEAVY DUTY INDUSTRIALCENTRIFUGAL PUMPS
HEAVY DUTY INDUSTRIALCENTRIFUGAL PUMPS
ENGINEERED PUMP WET END● ISO 5199 STANDARD — Ensures dimensional interchangeability with pumps conforming
to ISO 2585 plus the more stringent mechanical requirements of ISO 5199 standard.
● HEAVY DUTY BEARINGS — Fitted as standard with heavy duty taper roller bearings running in oil filled housing with oil mister. Housing is fitted with breather and oil level and drain plugs. Options include constant level oilers and oil coolers. To meet AS2941 Fire Protection Pump Code deep groove grease lubricated bearings, either sealed for life or greasenipple lubricated, can be fitted. Labyrinth shaft seals are available optionally.
● RIGID SHAFT — Heavy duty design type 316 or optional 431 stainless steel shaft for minimum deflection, smoother running and longer bearing life. Water slinger preventsintrusion of gland leakage into shaft bearing.
● ROBUST BEARING HOUSING — High strength cast iron bearing housing.
● SUPERIOR QUALITY — Outstanding design andmanufacturing processes provide reliability and minimummaintenance.
● 2 YEARWARRANTY
● MECHANICALSEALS—Fitted as standard withsingle on-shaftmechanical seal.Options include singleor double cartridge sealsrunning on stainless steelshaft sleeves in balanced orunbalanced configuration ofvarious types to suit particularapplications. External cleanwater flushing and coolingcan be supplied for hightemperature, abrasiveor toxic applications.
● DESIGN EXCELLENCE—Superior hydraulic design and manufacturing processes, together with double curvature impeller blades, provide highly efficient suction performance, higher speed capabilities and greater performance for reduced running costs and maintenance.
● 1600kPa PRESSURE RATING
● WET END MATERIAL OPTIONSCast Iron AS1830 / T260Stainless Steel AS2074 / H6BZinc Free Bronze AS1565 / C90250SG Iron AS1831 / 400-12“Durimet 20” AS2074 / H9A
● TAPER MOUNTED IMPELLERImpeller is taper mounted and keyed to shaft for positive drive and easy removal.
● WEAR RINGS — Replaceable stainless steel or zinc free bronze wear rings are available for pump impeller and casing where abrasive liquids are pumped.
● 'O' RING OPTIONS — Reusable'O' ring body seals in “Viton” as standard and “Teflon®” or Graphite as options.
● FLANGES — AS2129 - Table “E”. Optional drillings on request.
● STANDARD TAPPINGS —Volute drain plug, suction flange tapping for suction gauge and discharge flange tapping forpressure gauge.
● PACKED GLAND SEALS —Optional packed glands runningon replaceable stainless steel shaft sleeves are available with pumped water by-pass lubrication, or external clean water flushing. Split glands are fitted for ease of service.
SOUTHERN CROSS