Centrifugal pumps
1
treatment cycle in which each batch is individually treated and discharged. Circle 415 on the reader service card Centrifugal Pumps Fybroc Div., Met-Pro Corp. Telford, Pa. Centrifugal pumps molded of a new epoxy resin system for longer service life and added reliability in severe cor- rosive, high-temperature, and high-pres- sure applications are available from Fy- broc. The EY-2 epoxy resin pumps are designed for use with aggressive chem- icals/compounds, acids, and solvents typically encountered in processing pet- rochemials, pharmaceuticals, fertilizers, pesticides, plating solutions, and other applications where corrosives and/or high operating temperatures may affect pump performance and reliability. EY-2 pumps are available with flows up to 1,500 gpm, total dynamic head of 350 feet, and in configurations that include ANSI, self-priming, vertical, and canti- lever. Circle 416 on the reader service card Metering Pump Repair and Maintenance LMI, Div. of Milton Roy Acton, Mass. The RPM Pro Pac Repair & Preven- tative Maintenance Kit contains every- thing needed to perform routine, an- nual spare parts maintenance. Each kit contains a detailed illustration and sim- ple, step-by-step instructions for spare part replacement. Circle 417 on the reader service card Thickness Tester Kett U.S. Anaheim, Calif. Kett's LU200 is a simple-to-use, hand-held ultrasonics thickness gauge Circle 164 on reader information card that provides nondestructive measure- ment of coatings on polymer, organic, and thin metallic substrates. The LU200 doesn't require a metal substrate to mea- sure the coating. Multilayer polymers, coated glass, ceramics, and other organ- ics can be readily tested by selecting the appropriate calibration. Circle 418 on the reader service card Vacuum Trap MKS Instruments, HPS Div. Boulder, Colo. The new HPS Vapor Sublimation Trap has an 8-in. diameter body allow- ing it to contain a very large capacity in a compact space. The trap removes contaminants from the process system before they reach the pump. They catch by-products, such as ammonium chloride, that are generated in semi- conductor processes. The two-stage design traps effluent by-products in the first stage and particulates in the sec- ond stage. The trap is available in an- gle or inline configurations with 6- or 8-in. bodies. Ports are available in sizes NW 50, 80, 100 with a variety of flanges. The trap can be configured with a choice of seals and optional water fittings. METAL FINISHING • JUNE 1998 139
Transcript of Centrifugal pumps
treatment cycle in which each batch is individually treated and discharged.
Circle 415 on the reader service card
Centrifugal Pumps Fybroc Div., Met-Pro Corp. Telford, Pa.
Centrifugal pumps molded of a new epoxy resin system for longer service life and added reliability in severe cor- rosive, high-temperature, and high-pres- sure applications are available from Fy- broc. The EY-2 epoxy resin pumps are designed for use with aggressive chem- icals/compounds, acids, and solvents typically encountered in processing pet- rochemials, pharmaceuticals, fertilizers, pesticides, plating solutions, and other applications where corrosives and/or high operating temperatures may affect pump performance and reliability. EY-2 pumps are available with flows up to 1,500 gpm, total dynamic head of 350 feet, and in configurations that include ANSI, self-priming, vertical, and canti- lever.
Circle 416 on the reader service card
Metering Pump Repair and Maintenance LMI, Div. of Milton Roy Acton, Mass.
The RPM Pro Pac Repair & Preven- tative Maintenance Kit contains every- thing needed to perform routine, an- nual spare parts maintenance. Each kit contains a detailed illustration and sim- ple, step-by-step instructions for spare part replacement.
Circle 417 on the reader service card
Thickness Tester Kett U.S. Anaheim, Calif.
Kett's LU200 is a simple-to-use, hand-held ultrasonics thickness gauge
Circle 164 on reader information card
that provides nondestructive measure- ment of coatings on polymer, organic, and thin metallic substrates. The LU200 doesn't require a metal substrate to mea- sure the coating. Multilayer polymers, coated glass, ceramics, and other organ- ics can be readily tested by selecting the appropriate calibration.
Circle 418 on the reader service card
Vacuum Trap MKS Instruments, HPS Div. Boulder, Colo.
The new HPS Vapor Sublimation Trap has an 8-in. diameter body allow-
ing it to contain a very large capacity in a compact space. The trap removes contaminants from the process system before they reach the pump. They catch by-products, such as ammonium chloride, that are generated in semi- conductor processes. The two-stage design traps effluent by-products in the first stage and particulates in the sec- ond stage. The trap is available in an- gle or inline configurations with 6- or 8-in. bodies. Ports are available in sizes NW 50, 80, 100 with a variety of flanges. The trap can be configured with a choice of seals and optional water fittings.
METAL FINISHING • JUNE 1998 139
