CENTRIFUGAL PUMP - Advanced Lines
Transcript of CENTRIFUGAL PUMP - Advanced Lines
CENTRIFUGAL PUMP
Centrifugal Pumps area sub-class of dynamic axisymmetric work- absorbing turbo-
machinery. Centrifugal pumps are used to transport fluids by the conversion of
rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational
energy typically comes from an engine or electric motor. The fluid enters the pump
impeller along or near to the rotating axis and is accelerated by the impeller, flowing
radially outward into a diffuser or volute chamber (casing), from where it exits.
Skid Custom made heavy duty skid with Crash Frame L x W x H – 3.0 x 1.3 x 1.5 m
Engine New Caterpillar C4.4, 84bhp Diesel Engine
PTO New Mechanical PTO NACD
Centrifugal Pump Double Life 6 x 5 x 11, 800gpm at 65 psi
Manifolds 2 Suction Ports and 2 Discharge Ports with Butterfly Valves
Diesel Tank Mild Steel Diesel Tank Mounted on Frame
Control Engine starting, RPM and engine gauges on control panel
Coating Derekane 411.45 anti acid coating of pump interior and piping
Valves PTFE Acid Resistant Valves
No. of Vessels Two (2) Vessels per Unit
No. of Cartridge Fifty (50) Cartridges each Vessel / 40” (101.6 cm) Long
Skid Heavy Duty crash Frame with Forklift Pockets, Certified Pad Eye and Lifting Slings, Operator Platform for Maintenance purposes, Epoxy Coated.
Vessels Stainless Steel or Mild Steel, designed for Non-Hazardous Fluids with Drain Valve for each.
Piping & Valves All 4” Stainless Steel with 4” Butterfly Valves
PRV & Pressure Gauges
Each Vessel has one Pressure Relieve Valve set to 7 Bar with Inlet and Outlet Pressure Gauges
Vessels Cover Equipped with Swing Bolts and Nuts for quick and easy operation.
Maximum Working Pressure
7 Bar (101.5 psi)
Maximum Working Temperature and Flow
70°C (158°F) / Recommended Flow: 12 BBL/min (120 m³/min)