Cementing Casing Sub Sea
-
Upload
vandear-goalcantara -
Category
Documents
-
view
216 -
download
0
Transcript of Cementing Casing Sub Sea
-
8/13/2019 Cementing Casing Sub Sea
1/1
JOB SHEET FOR 11-7/8" INTERMEDIATE CASINGENTER COMPANY NAME IN CELL A4
ENTER WELL NAME IN CELL A5Current mud weight = 12.5
Depth last casing set = 4,000' Running String Land Out Above RKB = 21.33'
Type mud system = Low pH Desco Length of Running String and Tools = 1,527.33'MD drilled for this job = 9,850 RKB ID of Running String = 4.276
#1, 2, 3, 4, and 5
RKB to Subsea Wellhead = 1,506.00'
Total pipe left out of string, ft 220.06
Total pipe tallied, ft 8,516.48
Total Pipe Run, ft 8,296.42 RATE, bpm 10 15
Casing Check Status Good News AV, fpm 134 202
PUMP, spm 85 128
Column Length of Mud, ft 6,659
Total Hydrostatic PSI Annulus 6,735
Total Hydrostatic PSI Casing 6,407
* Final Surface Pressure 328
Type Dual Type cement 50/50 Posmix RUNNING SEQUENCE
Length, ft 672 Length, ft 2,000
Volume,bbl 50 Sacks To Mix 917 1. Davis Lynch Float shoe
Density, ppg 15.0 Additive 1 3% D20 2. 2-Joints #193, #192.
Additive 2 .045 gps D81 3. Davis Lynch Float collar.
Type cement Class H Additive 3 .2% D-46 4. Run Joints #191 through #6, joints.
Length, ft 500 Additive 4 5. Wellhead Assembly with X/O joint.
Sacks To Mix 455 Density, ppg 14.0 6. Running string with tools, and land out.
Additive 1 .045 gps D81 Yield, ft/sx 1.29 7
Additive 2 .2% D46 Mix Water, gps 5.95 8
Additive 3 Thick Time, hrs 5.0 9
Additive 4 Thread Lock FS, FC and connections in between.
Density, ppg 16.4 Check FS and FC for circulation.
Yield, ft/sx 1.07
Mix Water, gps 4.36 EST. TOC = 7350'
Thick Time, hrs 3.0
Wellhead Ass'y = 6.69'
Used Per Jt. Starting Jt. # Ending Jt. # Quantity Used X/O Joint To Wellhead Ass'y = 18.88'2 193 191 6 Amount of Casing = 8210.90'1 190 190 1 Float Collar = 1.47'
Shoe Joint(s) = 85.52'Float Shoe = 1.97'
Total Footage Run = 8,325.43'
7
Depth Float Collar = 9,742.47'
Pump output, bbl/stk 0.117
To Latch DP Plug, bbls 27.1
To Land Casing Plug, bbls 918 Depth Float Shoe = 9,829.46'
To Land Casing Plug, stks 7,846 Depth Casing Set = 9,831.43'
Amount of Rathole = 18.57'
ID Last Casing = 14.822
This Casing OD = 11.875
Mfg & Size = Dril-Quip 13-5/8" x 11-7/8" Nominal ID This Casing = 10.711
Test PSI = 3600 Hole Size For Casing = 14.75 Date Run: 7/23/1995
JOINTS LEFT OUT OF STRING
Casing check: (pipe run + plus pipe out) = to the amount tallied.
STRING MAKE-UP
TYPE WELLHEAD & TEST PRESSURE
(ENTER RUN ORDER AND OTHER INSTRUCTIONS FOR STRING)
Enter the bpmto calculate an AV & PUMP spmto circulate and cement this casing string.SUGGESTED RATES ...CIRCULATION RATE: SAME AS MAX AVWHEN DRILLING THIS SECTION OF HOLE.DISPLACEMENT RATE: @ 1-1/2 TIMES THECIRCULATION RATE.BUMP PLUG: @ 1/2 CIRCULATION RATE.
*Final pressure neglects
friction pressure, assumesa gauge hole and full mud
returns during the job.
WELLHEAD
LEAD CEMENTSPACER
TAIL CEMENT
CALCULATED ANN VEL FOR JOB
FC
FS
CASING CHECK
ESTIMATED PSI WHEN PLUG DOWN
CENTRALIZERS or EQUIVALENT
DISPLACEMENT
Casing plug kicked out with mud, and nowater ahead. Displaced with rig pumps.
TOTAL USED