Cds3 fiche produit
-
Upload
bw-group-france -
Category
Technology
-
view
92 -
download
3
Transcript of Cds3 fiche produit
CDS3
The CDS3 is a dedicated surround speaker and is an in-wall version of the on-wall DS6 S3. Most multi-channel music is
recorded with home entertainment in mind and is monitored using two, three or four monopole surround speakers. This enables
good location of side and rear images. The CDS3 offers a choice of both monopole and dipole operation, so you may choose
whichever type of operation best suits the conditions of the listening room, the size of audience and the type of programme
being played. Indeed, you may use different modes for side and rear speakers, or change the characteristic for different types
of programme. The CDS3, with its swing-out clamps, is easy to install in either new construction or retrofit situations and gives
minimal intrusion into the living space.
See nothing, hear everything
Low profile dedicated surround speakerSwitchable between dipole and monopileSwing-out dog fixings
2-way in-wall dipole/monopole system
1x ø25mm (1 in) aluminium dome tweeter1x ø130mm (5 in) woven Kevlar® cone mid/bass2x ø80mm (3 in) paper cone mid/high frequency
-6dB at 63Hz and 42kHz (monopole)-6dB at 63Hz and 15kHz (dipole)
85Hz-22kHz ±3dB on reference axis (monopole)85Hz-10kHz ±3dB on reference axis (dipole)
89dB spl (2.83V, 1m)
8Ω (minimum 3.0Ω)
4kHz (monopole) 250Hz (dipole)
100W continuous into 8Ω on unclipped programme
285mm (11.2 in) x 373mm (14.7 in)
247mm (9.8 in) x 335mm (13.2 in) 90mm (3.5 in) behind surface
3.9kg (8.6lb)
Semi-matt white suitable for customising or pre-painting
Pre-mount kit for new construction (PMK CDS3)
Technical features
Description
Drive units
Frequency range
Frequency response
Sensitivity Nominal impedance
Crossover frequency
Recommended amplifier power Frame size
Cut-out size
Min depth req
Net weight
Finish
Accessories
Technical Specification
©2006 B&W Group Ltd.
CDS3
The loudspeaker system shall be of the mono-amped 2-way selectable monopole/dipole type comprising of a single flush
mountable rectangular enclosure with protruding rectangular front containing one 5in bass driver with Kevlar cone and one 1in
tube loaded aluminium dome tweeter for monopole usage and two 3in midrange/high frequency side firing drive units for dipole
mode.
Performance specifications of a typical production unit shall meet or exceed the following:
Frequency response shall be 85 – 22kHz in monopole mode, 85Hz – 10kHz in dipole mode. Nominal impedance shall be 8
Ohm. Total power handling shall be 100W continuous into 8 Ohm on unclipped programme. Sensitivity measured with 2.83V
at 1-metre distance on axis, mean averaged between 85 – 22kHz shall be 89dB. External dimensions shall be 285mm (11.2in)
height x 373mm (14.7) width x 160mm (6.3in) depth with a protrusion of 71mm (2.8in). Total weight shall be 3.9kg (8.2lb).
The loudspeaker system shall be the B&W CDS3. No other system shall be acceptable unless the above combined
performance are equalled or exceeded.
Architectual and Engineering Specifications
Cut
-out
with
Pre
-mou
nt K
itC
ut-o
ut w
ithou
t Pre
-mou
nt K
it
Baffle outline
285m
m (1
1.2
in)
247m
m (9
.75
in)
254m
m (1
0 in
)
373mm (14.7 in)
335mm (13.25 in)
343mm (13.5 in)
Monopole Polar Response Horizontal Monopole Polar Response Vertical
Frequency Response
Dimensions
Dipole Polar Response Horizontal
Kevlar is a registered trademark of DuPont. Nautilus is a trademark of B&W Group Ltd. Copyright © B&W Group Ltd. E&OEB&W Group Ltd reserves the right to amend details of the specification without notice in line with technical developments
B&W Group (UK Sales)T +44 1903 221 500E [email protected]
B&W Group North AmericaT +1 978 664 2870 E [email protected]
B&W Group Asia LtdT +852 2 790 8903E [email protected]
B&W Group Ltd Dale Road Worthing West Sussex BN11 2BH England
T +44 (0) 1903 221800 F +44 (0) 1903 [email protected] www.bowers-wilkins.com