• One-glass sensor on the surface of 5mm chemically strengthened glass substrate.

• Exceed industry-standard for impact resistance making it suitable for unattended, vandal-prone environments.

• This sensor's optimized design offers 88% light transmission and 66%(±2%) light transmission at rugged privacy filter.

37

37

Privacy filter rugged on Surface Capacitive (S-Cap) offers outstanding privacy protection allowing only those directly in front of the display screen to see on-screen data.

15" Surface Capacitive rugged with Privacy Filter

이노터치_전단_0812.indd 1 2014-09-12 오전 10:55:37

System Performance Mechanical(rugged privacy film)

Light transmission 66%(±2%) Dimensions 330.2mm x 204mm

Input method Finger input Glass Thickness 5mm

Accuracy >98.5% of true position 2Way Core Privacy Film Thickness 0.35mm

Resolution 2048 x 2048(maximum resolution) Pitch 61

Linearization Factory linearized Depth 145

Tail Connection Solder type Surface Scratch Hardness MoHS 7 or higher

Electronics Optical (privacy film)

Communication Serial interface Transmittance 65%

Dimensions 330.2mm x 204mm Haze 14%

Operating Currency 40 mA(typical) Chromacity(X) 0.313

Power Connection USB BUS(5V) or 5V/12V Serial Chromacity(Y) 0.32

ESD ±8KV Contact, ±15KV Air Bias Angle 11°

Report rate 180Hz Viewing Angle 60°

Response time 25 ms

Reliability

Surface Obstructions Withstand most surface contaminants

Chemical Resistance ASTM-D-1308-02 and ASTM-F-1598-95

Impact Resistance Steel ball test UL 60950

Operating Temperature -30° C to 70° C

Storage Temperature -40° C to 85° C

Humidity Up to 90% RH non-condensing

15" Surface Capacitive rugged with Privacy Filter

Specification

이노터치_전단_0812.indd 2 2014-09-12 오전 10:55:38

Privacy filter rugged on Projected Capacitive (P-Cap) with palm rejection offers outstanding privacy protection plus palm rejection functionality in public applications.

15" Projected Capacitive rugged with Privacy Filter plus Automatic Palm Rejection

• You will see or write the information on your display while people on either side only see a darkened screen.• Palm rejection enables you to drive in educational applications.

이노터치_전단_0812.indd 3 2014-09-12 오전 10:55:39

15" Projected Capacitive rugged with Privacy Filter plus Automatic Palm Rejection

System Performance Mechanical(rugged privacy film)

Light transmission 66%(±2%) Glass thickness 5mm CGS

Input method Finger input 2Way core privacy film thickness 0.35mm

Accuracy >99% of true position Pitch 61

Auto calibration Yes Depth 145

Anti-noise capability Yes Surface scratch hardness MoHS 7 or higher

Waterproof Yes

Palm rejection Yes Optical (privacy film)

Versatility in design Unlimited design Trasmittance 65%

Moire´ No Haze 14%

Chromacity(X) 0.313

Electronics Chromacity(Y) 0.32

Communication USB Bias Angle 11°

Report Rate max. 210Hz Viewing Angle 60°

Response Time 20 ms

Applicable Touch Number 2 points multi touch Controller

Power consumption Idle mode : 500mW Input voltage 3.5V~5.5V, typical 5V

Sleep mode : 28mW Operating temperature -25° C to 80° C

Power Connection USB BUS(5V) Storage temperature -25° C to 80° C

Terminal resistance Tx is less than 15 KΩ Relative humidity 95% at 60° C, RH non-condensing

Rx is less than 15 KΩ Interface USB, I²C, RS232

Resolution 2048x2048 or more

Reliability Power consumption

Active mode: max. 60mA

Surface Obstructions Withstand most surface contaminants Idle mode : 8~12mA

Chemical Resistance ASTMD-F-1598-95 Sleep mode : 2.5mW (20Hz)

Impact Resistance Steel ball test UL 60950

Liquid Resistance Normal operating when remove water

Normal operating where unwatered area

Operating Temperature -25° C to 70° C

Storage Temperature -30° C to 80° C

Condensation No in humidity rating 20%~90%

Surface hitting 1 million times

Specification

이노터치_전단_0812.indd 4 2014-09-12 오전 10:55:39

The world’s first Inotouch sensor based on silver nanowire film offers remarkable slim bezel solution like a smartphone as you experienced, high invisibility in pattern as well.

The 42” Inotouch Patterned Sensor

42" Large-Format Projected Capacitive

Comparison table

Metal Mesh

Inotouch B companyA company

Slim bezel / invisible pattern IR tube with metal case Wired pattern visible

이노터치_전단_0812.indd 5 2014-09-12 오전 10:55:41

System Performance Mechanical

Light transmission 87%(±2%) Dimensions 990.9 mm x 600.4 mm

Input method Finger input Glass Thickness up to 6mm

Accuracy >99% of true position Pencil hardness rating More than 7H(Typical)

Auto calibration Yes

Anti-noise capability Yes Controller

Waterproof Yes Input voltage 3.5V~5.5V, typical 5V

Versatility in design Unlimited design Operating temperature -25° C to 80° C

Moire´ No Storage temperature -25° C to 80° C

Relative humidity 95% at 60° C, RH non-condensing

Electronics Interface USB, I²C, RS232

Communication USB Resolution 2048x2048 or more

Report Rate max.240Hz

Power consumption

Active mode: max. 60mA

Applicable Touch Number 10 points multi touch Idle mode : 8~12mA

Power consumption Idle mode : 240mW (240Hz) Sleep mode : 2.5mW (20Hz)

Sleep mode : 2.5mW (20Hz)

Power Connection USB BUS(5V)

Terminal resistance Tx is less than 15 KΩ

Rx is less than 15 KΩ

Reliability

Surface Obstructions Withstand most surface contaminants

Chemical Resistance Test Method: ASTMD-F-1598-95

Impact Resistance Steel ball test UL 60950

Liquid Resistance when water removed

Normal operating where unwatered area

Operating Temperature -10° C to 60° C

Storage Temperature -20° C to 70° C

Condensation No in humidity rating 20%~90%

Surface hitting 1 million times

42" Large-Format Projected Capacitive

Specification

이노터치_전단_0812.indd 6 2014-09-12 오전 10:55:42

• Thicker glass touchable up to 6mm• Waterproof• Faster report rate: 240Hz. equivalent to 4ms response time• Auto calibration• Superb sensitivity without any delayed action

The Inotouch’ sensor provides customers with industry-leading solution that resolves up to 10 simultaneous multi-touch events, enabling array of choices to glass thickness up to 6mm.

The Inotouch All-round Sensors

32" Projected Capacitivewith touchable up to 6mm thickness glass

Versatile features

Waterproof

이노터치_전단_0812.indd 7 2014-09-12 오전 10:55:43

32" Projected Capacitive

System Performance Mechanical

Light transmission 87%(±2%) Dimensions 748 mm x 442 mm

Input method Finger input Glass thickness up to 6mm

Accuracy >99% of true position Pencil hardness rating More than 7H(Typical)

Auto calibration Yes

Anti-noise capability Yes Controller

Waterproof Yes Input voltage 3.5V~5.5V, typical 5V

Versatility in design Unlimited design Operating temperature -25° C to 80° C

Moire´ No Storage temperature -25° C to 80° C

Relative humidity 95% at 60° C, RH non-condensing

Electronics Interface USB, I²C

Communication USB Resolution 2048x2048 or more

Report rate 25ms

Power consumption

Active mode: max. 60mA

Applicable touch number 10 points multi touch Idle mode : 8~12mA

Power consumption Idle mode : 240mW (240Hz) Sleep mode : 2.5mW (20Hz)

Sleep mode : 2.5mW (20Hz)

Power connection USB BUS(5V)

Terminal resistance Tx is less than 40 KΩ

Rx is less than 40 KΩ

Reliability

Surface obstructions Withstand most surface contaminants

Chemical resistance Test Method: ASTMD-F-1598-95

Impact resistance Steel ball test UL 60950

Liquid resistance Normal operating when remove water

Normal operating where unwatered area

Operating temperature -10° C to 60° C

Storage temperature -20° C to 70° C

Condensation No in humidity rating 20%~90%

Surface hitting 1 million times

Specification

이노터치_전단_0812.indd 8 2014-09-12 오전 10:55:43

Inotouch helps integrators to meet the growing demand matching for the size equivalent to LCD outer dimension

Inotouch advanced silver nanowire film offers excellent optical transparency, high product quality, enabling unlimited versatility in sensor design.

Slim Borders

Silver Nanowire Film

21.5" Slim Border designed Projected Capacitive

A purpose-built sensor for applications that demand high-class services at realizing true slimness with high -performance multi-touch functionality, enabling array of choices to innovative design.

The Inotouch Purpose –built Sensors

Total tracer width : 8mm

Tracer Width : 45umTracer Gap : 35um

이노터치_전단_0812.indd 9 2014-09-12 오전 10:55:44

21.5" Slim Border designed Projected Capacitive

System Performance Mechanical

Light Transmission 86%(±2%) Dimensions 496.6mm x 295.6mm

Input method Finger input Glass Thickness 2mm

Accuracy >99% of true position Pencil hardness rating More than 7H(Typical)

Auto Calibration Yes

Anti-noise Capability Yes Controller

Waterproof Yes Input voltage 3.5V~5.5V, typical 5V

Versatility in design Unlimited design Operating temperature -25° C to 80° C

Moire´ No Storage temperature -25° C to 80° C

Relative humidity 95% at 60° C, RH non-condensing

Electronics Interface USB, I²C

Communication USB Resolution 2048x2048 or more

Report Rate max.240Hz

Power consumption

Active mode: max. 60mA

Applicable Touch Number 10 point multi touch Idle mode : 8~12mA

Power consumption Idle mode : 240mW (240Hz) Sleep mode : 2.5mW (20Hz)

Sleep mode : 2.5mW (20Hz)

Power Connection USB BUS(5V)

Response Time 20 ms

Reliability

Surface Obstructions Withstand most surface contaminants

Chemical Resistance ASTMD-F-1598-95

Impact Resistance Steel ball test UL 60950

Liquid Resistance Normal operating when remove water

Normal operating where unwatered area

Operating Temperature -10° C to 60° C

Storage Temperature -20° C to 70° C

Humidity Up to 90% RH from 0° C to 85° C

non-condensing

Specification

이노터치_전단_0812.indd 10 2014-09-12 오전 10:55:45