DESIGNING, PRODUCTION, SUPPORT OF SCIENTIFIC & INDUSTRIAL LABORATORY EQUIPMENT

ISO 9001

catalogue

V.032015a

Tissue culture

The Hellenic manufacturerfor solutions in the Laboratory & Industry

55 YEARS OF EXPERIENCE-TWO GENERATIONS OF

CONTINUOUS IMPROVEMENT.

CDR CHRYSSAGIS was originally established in 1954 by Ev. Chryssagis initially servicing commercial refrigerators. Since 1988 it designs and manufactures environment controlled chambers and material testing appliances for scientific, industrial laboratories and horticulture producers under the trademark CDR ©.

Today CDR CHRYSSAGIS is well known for the reliability and consistent support of its products. It is the only Hellenic company dedicated to the design and production of environment simulation chambers or appliances used exclusively in industrial quality control laboratories.

The technical knowledge and manufacturing tradition of the company are firmly established by the large number of specialized products designed for scientific and industrial laboratories that are in the Hellenic and International market

Our Company

Tissue cultureChambers

Applications

Any laboratory, in which tissue culture techniques are performed to

strengthen the propagation capability through production of disease-free

plant material through in vitro techniques, must contain a tissue culture

chamber or room.

CDR's TCU series chambers meet all required specifications for these

demand applications in tissue culturing and genetic experimenting

laboratories. They control temperature, relative humidity and light intensity.

The air circulation throughout the entire culture space ensures minimum

fluctuations.

TCU series chambers come in three standard sizes. The low cost models

with 200 and 300 Ltr internal space and the advanced models with 500

and 1000 Ltr internal space. For larger internal space requirements CDR

is manufacturing tailor made tissue culture rooms.

All products carry CE marks and are covered by a comprehensive

warranty. Since some research projects demand different specifications,

we understand that your chamber's requirements may not fit into our

standard products, so please contact us for specific details and options on

custom orders.Multi level shelves

with LED light canopies on top

Reach-in TCU seriesReach-in

TCU series

TCU-1000CMP3

TCU - 200-300-501-1001

ConstructiChambers designed for flexibility

CDR's TCU reach-in series chambers are specifically designed with

highly efficient but thin wall polyurethane insulation to minimize the use

of your laboratory space. This high-density (45Kgr/m3), fireproof and

environment friendly insulation (CFC free) ensures low power

consumption. As standard size 500 & 1000 have interior and exterior

walls made of stainless steel (304) and low cost size 200 has walls

made of galvanized steel baked with white baked enamel.

Large size chambers (500 & 1000 Ltr) contains 4 caster assemblies (2

with brakes). Wide door opening provides full and easy access to the

chamber's interior. A magnetic gasket provides a tight seal to door

frame. All models are equipped with an internal glass door that ensures

easy observation without disturbing the internal atmosphere.

To maximize versatility the growth area has multi-tiered shelving units

with adjustable height in 12mm steps. Because CDR emphasizes user

friendliness, every chamber has full front size door opening(s) for easy

access and an internal glass door that allows monitoring of every single

shelf without disturbing internal atmosphere.

Condensation-free culture vessels

Precisely designed and manufactured air plenums are used for uniform

air distribution. The conditioned air that is picked up from a fixed air

opening located at the top of the chamber circulates through a rear duct

and it is diffused by a specially designed plenum at the bottom of the

chamber.

The air that is delivered vertically upward at a slow speed through each

shelf eliminates condensation problems in culture vessels.

Incoming air (fresh air) passes through a HEPA filter and flow can be

manually controlled with a damper.

Refrigeration & optionally humidification systems

Standard models are equipped with <<tropical>> type refrigeration

systems that are designed to operate in ambient temperature up to 46 C.

Refrigeration plans are energy efficient , CFC free, with self contained

refrigeration compressors. All air cooled refrigeration plans include a hot

gas bypass system for high temperature stability and continuous

compressor operation that last long. This guarantees economy, reliability

and quiet operation.

Optionally all models may be equipped with a humidification/

dehumidification system. CDR's humidification systems are based on

reliable centrifugal atomizing humidifiers. Alternatively all chambers may

be equipped with electronic ultrasonic atomizing humidifiers.

Both these humidification systems produce very small water droplets

(>7μm) which evaporate immediately so they are not transferred inside

the working space.

The dehumidification system is always based on an independent

refrigeration system.

NOTE Atomizing humidifiers must be supplied with clean water to the

following specification; pH=7.0 ±0.5, filtration <2 microns (0.00008in) and

resistivity between 0.5 and 1.0 Meg Ohms.

<<Tropical>> refrigeration plan

Centrifugal atomizinghumidifier

Ultrasonichumidifier(optional)

Lighting

To meet you unique needs CDR is providing a number of lighting

solutions. According to light bank (canopy) position and light spectrum

(lamp types) types you can order the following models:

CANOPY POSITION

SD/ Lights at the SIDES & on the DOOR of the working space

(Fluorescent lamps)

SH/ Lights at the TOP of every shelf (LED lights).

LIGHT QUALITY (spectrum)

FL/ Fluorescent lamps

FLH/ High frequency fluorescent lamps with electronic ballasts.

FLHd/ frequency fluorescent lamps with dimmable electronic ballasts

LED/ LED lighting with standard spectrum

LEDd/ LED lighting with adjustable spectrum and intensity.

BARRIERED OR NON BARRIERED CANOPIES

Fluorescent light based chambers have light banks with a separating

double glazed glassbarriers and LED light based chambers have LED

lighting inside the chamber. These chambers have barriered and ventilated

light bank.

· Depending on model and desired configuration, lighting levels

range start from 25 to 200 μmoles/m2/s at 15 cm from the lamps.

· Every lamp type can provide different maximum intensity.

Light bank at the side of the chamber

Light bank on the door

TCU-1000CMP3

TCU - 200/DGe

Walk-inTissue Culture Chambers

TCU Walk-in

Standard and custom from

drive-ins; modular design small step-ins to large

determine the best fit. allows customer to

Applications

Any laboratory, in which tissue culture techniques are

performed to strengthen the propagation capability through

production of disease-free plant material through in vitro

techniques, must contain a tissue culture chamber or room.

Walk-in TCU series chambers are an ideal solution for any

production tissue culture laboratory as well as for these

tissue culturing and genetic experimenting laboratories with

an eye to large volume. CDR is manufacturing by request any

size of tissue culture room.

All products carry CE marks and are covered by a comprehensive

warranty. Since some research projects demand different specifications,

we understand that your room's requirements may not fit into our standard

products, so please contact us for specific details and options on custom

orders.

Construction specificationsWalk-in tissue culture chambers are manufactured with GERMAN made

panels that feature an attractive, corrosion resistant enamel finish on

galvanized steel walls, which assure long service life. High density,

fireproof, non CFC polyurethane insulation saves on energy consumption.

Our panels stand out for their three (3) thermal barriers whose side joints can sustain the produced energy and their holhlkammer profile (HKP) which builds into the panel in the form of a longitudinal flange seals the joints airproof and covers the grooves according to the directions of the EU. The Ems-ThyssenKrupp panels are manufactured: according to the specifications of the Berlin Polytechnic University by DIN, German Thyssen steel sheets, Bayer German Polyurethane, offering the largest 15% -20% usable volume space.

The floor is made of specially processed plywood that is water tight in the

connections and the final surface. It is powerful and of high resistance

(2.000 kg/m2), insulating, unaffected by the humidity, do not retain

pollutants and is easily cleaned.

The hinged doors are assembled with German materials, accessories and mechanisms and they close hermetically. Their polyurethane (PU) insulation comes from the house of BAYER Germany, with triple insulating ability in contrast to the other insulating materials. Optional features include a double glazed observation window with a built in cover. Door Is locked with a key.

CDR's tissue culture rooms provide modular multi level shelving that

ensure wide mounting surface for tissue culture production.

There are two options concerning shelve’s design. First there are

shelves with lights (LED or fluorescent lamps) on top and shelves

with barriered lights banks that are mounted on the side of chamber’s

walls. Please contact with our engineers for designing a special room

based on your needs.

LED lighting is an advanced way for production because they

consume significantly less energy than the fluorescent lighting, but

also because the substantially lower amount of heat generated by the

LEDs means less cooling is required. This reduces the load on the

energy network, which then allows greater flexibility for witching the

lighting. This in turn results in better control of the growing process.

Any size to suit customer's needs. CDR is equipped with computer-aided design and manufacturing

technology in order to conform to your specific needs. Optionally

CDR offers an on-site service to establish exactly what is needed to

meet customer requirements.

Our modular rooms are manufactured at any dimensions to meet

particular room restrictions or to effectively accommodate any budget.

They are designed for accurate, quick on-site assembly by our

experienced technicians. Please contact our sales department for

information on orders and local support of our products in your

region.

Modular Walk-ins. Every model has walls, ceiling and floor made of German origin

prefab panels with pour-in-place polyurethane. This high-density

(45Kgr/m3), fireproof and environment friendly insulation ensures low

power consumption.

Panel's skins are made of galvanized sheet metal, finished off in

white baked enamel which assures long service life and even light

distribution.

Αll joints are perfectly sealed at both sides by double barreled NSF®

approved gaskets. The added raised surface pattern of the floor

increase traction thus reduces the potential of slip-and-fall accidents,

even in wet conditions.

Ready-Built Walk-ins As an alternative to our modular chambers, factory pre-assembled models are available and ready to be installed. On site. structures arrive at the site typically on a gooseneck truck and, depending on size and customer preference, lifted into place by crane, boom-lift or forklift and they are immediately fully operational.

Ready-built walk-ins

Modular walk-ins

.

CMP3 control system with7” color touch screen.

Multi password protection

CMP3 on board data logging

DG control system’s panelBasic-low cost system

CMP3 control system’s panelwith 7” color touch screen

SELECTABLE CONTROL SYSTEM

Every reach-in or walk-in tissue culture chamber may be equipped with the economical

(DG) or the advanced (CMP3) control system.

DG CONTROL SYSTEM is our low cost solution. DG series chambers are equipped

with microprocessor PID controllers which offer dual set point (day-night) temperature

and humidity, analog timer for the photo period and independent switch for every lamp.

All models feature high/low temperature protection with audio and visual alarm.

CMP3 CONTROL SYSTEM includes our 24 years of experience in environment

control chamber design. It is a PLC based control systems with LCD color touch screens

that offer program flexibility.

CMP3 offer full PID that controls environment with high stability. Multiple screens with

drop down menus and help system permit authorized users (code protected) to easily

adjust variables of the programs. All chambers can control temperature, relative

humidity, light photoperiod, light intensity in up to 10 step-levels or electronically from

10-100% and optionally CO2 concentration and PAR light measurement. System’s

language may be selected between Greek, English, German or French.

Real time clock supported from one year's rechargeable battery ensures automatically

program adjust after a power failure (Watchdog Timer). Real-time programming is

available to all working parameters. Audio and visual alarm system supports

temperature, relative humidity, sensors burn out, self diagnostic system for refrigeration

plan and humidifier malfunction, open door. Alarm’s data are logged with time stamp

and alarm control system can be connected with central alarm system.

The CMP3 programmable control has a 7” color touch screen and capacity for 48 steps

per day program for every working parameter. It has a memory of 25 daily programs

with user selectable names as well as an internal on screen data logger with USB

connection for trasffering collected data with a stick.

NIKI CMP3 control system features:

7” color touch-screen with graphical interface menus.

Multi point programming with 48 steps per day program capability for every

working parameter. CMP3 has a memory of 25 daily programs with user

selectable names.

Control menu with password protected access for authorized users only.

Real- time chamber monitoring of all controlled parameters.

Full PID control mode for temperature & relative humidity.

Light intensity in up to 10 step-levels or electronically from 10-100%.

Self-diagnostic menus for all electromechanical systems with warning screens for

faulty condition.

Audible and visual alarms with alarm log for temperature & relative humidity or

any faulty system. Alarm logs record when limits are exceeded and corrected.

Alarm connection capability to building's central alarm system.

Integrated data logging facility. Data is optionally exportable for processing with

Excel and other spreadsheet applications with a USB stick. Viewing archived data

appears in list or graphical format. Access data-log file while continuing to log

current data without disruption. Program reading rate is adjustable by the user.

UPS protection of the control system for 45 minutes (optional).

Control systems

CMP3 OPTIONAL FEATURES:

Temperature uniformity protection with multi-point measurement.

Alarm extension with GSM voice or SMS message.

Ethernet connectivity (please see central management software).

Central managment control software

CMP3/SCADA central management software. CDR understands the convenience of managing your chambers right from

your desktop or from any internet-enabled PC. We now offer the

advanced SCADA based system with data communication support. CDR

CSADA in conjunction with CMP3 is a powerful management system that

allows you to precisely and effectively control, monitor and acquire data

from your chamber. From your desktop computer with intranet access or

from anywhere with internet connected laptop you can use the friendly

graphical interface of our SCADA/CMP3 to master your chamber. The

system Is capable of:

1. A supervisory “dashboard” view displaying the status of all CDR's

chambers.

2. Alarms adjusting by setting critical control parameters and

tolerances.

3. Immediate alert/alarm notification to your PC, on your mobile

phone with voice or SMS message.

4. Data Acquisition of all working parameters of your chambers. All

history data are available:

a) for viewing in graphical form.

b) for viewing as tabular form

c) for printing in real time or intervally.

d) temperature is available also as mean kinetic temperature

reading.

CMP3/SCADA alarm monitoring

CMP3/SCADA on line monitoring

Multi level shelves with attached light fixtures at the top.

Light compartment outside the side wall with a double glazed insulating barrier (TBLOUS).

Walk-in chamber’s Lighting systems.To meet you unique needs CDR is providing a number of lighting

solutions. According to light bank (canopy) position and light spectrum

(lamp types) types you can order the following models:

LIGHTING SYSTEMS (Selectable)

FLS/ Fluorescent lamps at the side walls of the walk-in chamber.

Lighting system is installed outside the room with separating double glazed

glass barriers.

FLHS/ High frequency fluorescent lamps with electronic ballast. Lighting

system is installed outside the room with separating double glazed glass

barriers.

FLT/ Fluorescent lamps at the TOP of every shelf.

FLHT/ High frequency fluorescent lamps with electronic ballast at the TOP

of every shelf.

FLHdT/ High frequency fluorescent lamps with dimmable electronic

ballasts at the TOP of every shelf.

LEDT/ LED lights at the top of every shelf.

· Depending on lighting system and the desired configuration,

lighting levels range start from 160 to 1000 μmoles/m2/s at 15 cm

from the lamps.

· Every lamp type can provide different maximum intensity.LEDs at the top of the shelves

TCU Reach-in Chamber’s specificationTCU - 500 & 1000/DG or CMP3

TCU-1001

1020 Ltr

5-45 C lights ON-OFF (other upon request)

6 (height adjustable)

1300X610

up to 300 μmol/m2/sec(fluorescent lamps)

centrifugal (opt. ultrasonic) atomizer

220-240VAC/1Ph/50Hz (other upon request)

50-95% (optional)

2 Fans

10-46

0,1

0,2

0,5

0,5

1%

3% / 2%

1%

0,1

498 Ltr.

TCU-501

610X550

Internal Volume

Shelf dimensions

Relat. humidity selection resolution

Temperature selection resolution

Relative humidity resolution

C 2 enrichment

Rel.humidity stability /accuracy

Temperature resolution

Temperature accuracy

Temperature uniformity

Relative humidity range

Humidification system

Temperature stability

Working environment

Number of shelves

Temperature range

Air circulation

Light intensity

Power supply19.

10.

11.

12.

13.

14.

15.

16.

17.

18.

1.

2.

3.

4.

5.

6.

7.

8.

9.

TCU - 200 & 300/DG

10.

11.

12.

13.

14.

15.

16.

17.

18.

1.

2.

3.

4.

5.

6.

7.

8.

9.

19.

Rel. humidity selection resolution

Temperature selection resolution

Relative humidity resolution

Relative humidity accuracy

Internal Volume (Ltr)

Relative humidity stability

Shelf dimensions (mm)

Temperature resolution

Temperature accuracy

Temperature uniformity

Relative humidity range

(optionally) Humidification system

Temperature stability

Working environment

Number of shelves

Temperature range

Air circulation

Light intensity

Power supply 220-240VAC/1Ph/50Hz (other upon request)

210

environment to 90% (optional)

166 μmol/m2 sec(other upon request)

mist atomizing

TCU-300

400X460

1 Fan

10-46

5-40

0,1

0,2

0,5

0,7

1%

3%

3%

1%

0,1

TCU - 300

TCU - 500

TCU-1000

TCU-200

300

500X480

(other upon request)

4 (height adjustable)

up to 200 μmol/m2/sec(LED)

1 Fan

Optionally O

TCU Reach-in Chamber’s dimension

60 or 100mm non CFC polyurethane

environment up to 95%

TCU WALK-IN CMP3

380-400VAC/3Ph/50Hz

Design upon request

centrifugal atomizers

Design upon request

Size upon request

-10 up to +46

Forced convection

0,1

0,2

0,5

0,7

1%

3% /

Optional

1%

0,1Temperature selection resolution

Relative humidity resolution

CO2 control

External Dimensions (mm)

Relative humidity stability/accuracy

Temperature resolution

Temperature uniformity

Relative humidity range (optional)

Temperature accuracy

Temperature stability

Humidification system

Working environment

Shelf dimensions

Temperature range

Air circulation

Light intensity

Power supply

Insulation

Relat. humidity selection resolution

19.

10.

11.

12.

13.

14.

15.

16.

17.

18.

1.

2.

3.

4.

5.

6.

7.

8.

9.

5 -45 C Standard / Other upon request

Other upon request

(25-300μmoles/m2/sec)

TCU Walk-in Specification

Specifications are based on nominal voltages of 400 or 440V in ambients of

22C to 25C . Continuing research and improvments may result in specification

changes at any time without previous notice.

LED Lighting system (optional)

I ĜG I HĠĢİ WAVELENGTHS

FAR RED (nm) 725(min) 740(nom) 750(max)

DEEP RED (nm) 650(min) 660(nom) 670(max)

BLUE (nm) 455(min) 470(nom) 485(max)

3%

Optional Accessories

o Advanced ultrasonic humidifier.

o Extended temperature ranges available upon request.

o On board paperless recorder.

o Central management software for control & monitoring

with Ethernet or Rs232 / 488 connection.

o Waste water evaporator or recirculation system.

o Water deionizers.

TCU Walk-in 5.3Chamber’s dimension(This is not a standard model it is for sampling purposes only. We design tissue culture rooms according

to our customer's needs).

CDR’s LED lightsSpectra for

all propagation applications

LED lighting for propagation

The growth of a plant is strongly determined by the total number of photons that it absorbs in the PAR region.

Total absorbed energy varies according to:

Day length

Total propagation time requirement is influenced by the photoperiod.

Spectrum

The mix of colors in the light (spectrum) also strongly influences the development of a plant. CDR provides in

cooperation with Philips special LED light recipes for specific applications.

Light uniformity

When using artificial lighting, uniformity and constant quality of the light spectrum is very important for a

constant quality of crop production. Light is an important horticultural production tool and a key factor in plant

research. LEDs (light-emitting diodes) are set to play a major role in horticultural lighting. With LED lighting,

the growth light – spectral output – can be tuned, which makes it possible to apply the optimum 'light recipe'

at every stage of a crop's growth. This capability,

together with effective heat management, long

lifetime, high luminous efficiency and energy

efficiency, opens up tremendous opportunities for

researchers, growers and breeders.

High luminous efficiency

As LEDs produce only a little radiant heat, it is

possible to position the light source close to the

crop without burning the leaves.

LED modules in the controlled environment of a

propagation room allowed better control of the

plant growth cycle, resulting in higher rooting

percentages. Quality is improving drastically with

more uniform and consistent growth, better roots

and stronger plants.

Information subject to change without written notice.

Propagation (Tissue culture and seedlings, cuttings & young plants)

When using artificial lighting, uniformity and constant quality of the light spectrum is very important for a constant quality

of crop production. LED lights provide a good alternative light source for propagation purposes due to high luminous

efficiency and maintained uniformity of illumination. The capability to reduce distance between layers is an ideal solution

for CDR's TCU models with light banks mounted on top of every shelf. CDR's TCU series chambers are equipped with one

of the following type of LED lamps.

1. Philips GreenPower TLED (25-100 μmol/m2/s) which offer an extremely effective and efficient alternative in tissue

culture to traditional fluorescent lamps, delivering energy savings up to 70% compared to fluorescent lighting.

GreenPower TLED also improves tissue culture growth parameters, resulting in a higher multiplication factor,

better rooting quality and a

shortening of the total growth

cycle. On top of energy savings

these parameters brings more

profit! To improve growth

performance dedicated recipes

are needed. GreenPower TLED is

available in six different versions.

2. Philips GreenPower LED string is

used in tissue culture of Low

light intensity (5-30 μmol/m2/s)

and in seedling storage. This LED

light string is a good solution for

long tissue-culture shelves. Red,

blue, far-red, and white strings are available. Due to little radiant heat, it is possible to position the light source

close to the culture without burning tissues. Even with shelf heights of up to 25 cm, the light distribution on the

optical surface is guaranteed to be even.

3. Our regular multi color LED modules which incorporate groups of white, blue, red in equal color ration (1/3 each).

These modules are manufactured to be used with

different plant species in order to provide healthy

growth along with better energy efficiency.

Maximum light output is controlled from our

programmable control system (CMP3 system)

which is capable for full dimming control (0-100%)

individually for every LED group. Those way

customers may adjust precisely the light spectrum

& irradiance according to their application-plant's

need.

Information subject to change without written notice.

MODEL HEIGHT WIDTH DEPTH

LMR-75/120 750 1200 600

LMR-75/150 750 1500 600

LMR-75/180 750 1800 600

WORKING BENCH DIMENSIONS

TECHNICAL DATA

ULPA filter of typical efficency of >99.999% for 0,1 to 0,3 micron particles.

An easily-accessed, disposable prefilter arrests no less than 98% of particles 5 micron and larger, thus prolonging HEPA filter life.

A direct-drive fan is regulated by a speed controller to enable airflow to be maintained through filter life. Fans and filter plenums are designed to provide ultra-quiet operation and low vibration level.

Built-in warm white, electronically ballasted, 5000k lighting provides excellent illumination of the work zone and reduces operator fatigue. The reliable lighting system is zero-flicker and instant start.

CDR LMR-75 positive horizontal laminar flow cabinet series creates a particle-free working environment by taking air through a filtration system and exhausting it across the work surface with a unidirectional air stream for protecting your work. They are ideal for optics preparation; drug Compounding, Plant Cell Culture, Tissue Culture (non-biological), Media Preparation, Pharmaceutical procedures, Electronic assembly.

Laminar flowcabinets

Positive horizontalflow clean bench

Positive horizontalflow clean bench

LMR-75-120*150*180

SHPL - 6040 & 9060

Orbital shakingplatforms

Heavy duty series

Heavy duty series

MODEL HEIGHT WIDTH

SHPL-6040 750 1200

SHPL-9060 750 1500

CDR's SHPL heavy duty series orbital

shaking platforms are versatile instruments for many general

purpose shaking applications in research or Industrial laboratories.

They can be equipped with a variation of interchangeable accessories (clamps) for holding many different sizes of

vessels, including bottles, flasks, boxes and Petri-dishes. They can be used as floor stand or bench top shakers in laboratory

rooms or inside environment controlled chambers.

CDR produces 3 microprocessor controlled shaking platform models for continuous or timed operation ensuring accurate

repeatability of time-sensitive incubations. Speed is controllable with a frequency accurate HITACHI inverter. During

operation the LCD display clearly indicates actual orbital frequency. Optionally an analogue or electronic timer automatic

switch-off the shaker and an audible signal warns the end of the set time period.

� Competitive quality-price ratio.

� Adjustable agitation speed: 30 to 300 rpm. Shaking amplitude 30mm.

� Loads up to 18 kg (optional for higher loads).

� Choice of interchangeable

vessel holders to suit different

types of vessels - maximum

flexibility.

� Vibration free operation

due to counterweight

precision balanced orbital

circulation mechanism.

� Soft start/stop feature

ensures a smooth ramp-

up/down and avoids potential

CDR CHRYSSAGIS can deliver and install your new equipment with our factory trained personnel. Quotations upon request.

All service personnel are graduates of technical schools. Additionally, the technicians attend factory sponsored training seminars when available so that CDR can provide the best possible service. We have no limit in our area of coverage.

At CDR CHRYSSAGIS we are committed to our customers not only at the initial installation but to increasing the life and limiting downtime of that unit. We have designed a Preventive Maintenance program and provide Calibration services to help you meet your test requirements and recording requirements.

We recommend an Annual PM and Calibration to properly maintain your unit. The PM involves removal and replacement of all components that could fail within a year. This includes filters, float switches, orings, fans etc. This process usually takes one day and normally eliminates the need for further service calls.

Don't hesitate to contact us with your questions or problems.

CDR

Support & Repair

OMANAlAjmi Technical Supplies & Trading LLC (ATS Lab)Laboff Middle East OfficePO Box 333, Al Maladda, Post Code 314Sultanate of OmanTel: + 968 24797915Fax: + 968 24796114Email: laboff-me@atslaboman.com; bmss4ats@omantel.net.om

JORDAN Tatweer Group Amman Regional Office Phone: + 962 6 5546570 Fax: + 962 6 5546580 E-mail : info@tatweer.us , tatweer.mail@gmail.com Website: www.tatweer.us

PAKISTAN PROGRESSIVE TRADE COMPANY RawalpindiPhone: +92 (51) 4413291 , 4413293Fax: +92 (51) 4413293E-mail: progressivetradeco@gmail.com

HELLAS

ANTISEL SA 61 P. Karatasiou Street542 50, Thessaloniki, GreecePhone: +30 231 032 2525Fax: +30 231 032 1912e-mail: antisel@antisel.grWebsite: www.antisel.com

APEROTAN TECHNIKIEpictitou & ΖΥΓΟΥΡΗ Rd45445 Joannina GREECE Phone: +30 (26510) 31789 Fax: +30 (26510) 31794 e-mail: info@apeirotan.gr , diapost@otenet.gr Website: www.apeirotan.gr

HELIODYNAMI 224, Syngrou Ave. Scientific Devices S.A GR-176 72 Kallithea (Athens). GreecePhone: +30 (210) 9592323Fax +30 (210) 9581013e-mail: info.vector@pertip.grWebsite: www.heliodynami.gr

LABOR SCIENCE SA 6, Aftokratoron Angelon Str. GR114 73 Athens, Greece P.O. Box 26019Phone: +30 (210) 8848058Fax: +30 (210) 8847837e-mail: info@laborscience.gr

ISO 90018 Sahtouri St, 17341 Ayios Dimitrios, Athens, HELLASTel.: +30 (210) 9325221, Fax: +30 (210) 9350039e-mail: sales@chryssagis.eu

CHRYSSAGIS

http:// www.chryssagis.eu

ALBANIA OLS-END sh.p.kRr. Komuna e ParisitPallatet TIRHINOKulla D, Ap 7/3, TiranaPhone: +355 (67) 2525829E-mail: viola.allka@gmail.com

BANGLADESH MICRO ENGINEERING CoDhakaPhone: +880 (2) 9673809Fax: +880 (2) 9673809E-mail: micro@axisbd.net

CYPRUS TASNI TRADING CO LTD57 LIDRAS FLAT 4 111 LEFKOSIA0 NICOSIAPhone: +357 (22) 680413Fax: +357 (23) 87555Website: http://www.tasni.com

EGYPT FIRST MEDICAL INTERNATIONAL 19 Naser Al Thawra St. , El Haram,GizaPostal Code: 12111Phone : +0239768330Fax : 33273036 - 39768330 E-mail: firstmedical_226@yahoo.com Website: www.firstmedicalegy.com

INDIA JKG Bio Science Pvt Ltd 6D, MIG DDA Flats Shivam Enclave Delhi 110032 India Ph: +91 9810659284 Tel/Fax: 0091 43043126 Website: www.jkgbioscience.com

IRAQ Scientific apparatus Tatweer Group Amman Regional Office Phone: + 962 6 5546570 Fax: + 962 6 5546580 E-mail : info@tatweer.us , tatweer.mail@gmail.com Website: www.tatweer.us

KUWAITAl-Arfaj Engineering Co WLLPO Box 391, Salmiya, 22004, KuwaitTel : +965 2482-7934 / 2481-7944Fax: +965 2481-7442 / 2481-7443 /2482-7894Email: sales@arfajengg.comWebsite : www.arfajengg.com

Agents - Distributors

8 Sahtouri St, 17341 Ayios Dimitrios, Athens, HELLAStel.: +30 (210) 9325221, fax: +30 (210) 9350039e-mail: sales@chryssagis.eu

CHRYSSAGIS

http:// www.chryssagis.eu