CCNA 4 v3.1 Module 1 Scaling IP Addresses
-
Upload
lillian-underwood -
Category
Documents
-
view
101 -
download
4
description
Transcript of CCNA 4 v3.1 Module 1 Scaling IP Addresses
222© 2004, Cisco Systems, Inc. All rights reserved.
Purpose of This PowerPoint
• This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.1.
• It was created to give instructors a PowerPoint to take and modify as their own.
• This PowerPoint is:
NOT a study guide for the module final assessment.
NOT a study guide for the CCNA certification exam.
• Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.
333© 2004, Cisco Systems, Inc. All rights reserved.
To Locate Instructional Resource Materials on Academy Connection:
• Go to the Community FTP Center to locate materials created by the instructor community
• Go to the Tools section
• Go to the Alpha Preview section
• Go to the Community link under Resources
• See the resources available on the Class home page for classes you are offering
• Search http://www.cisco.com
• Contact your parent academy!
666© 2004, Cisco Systems, Inc. All rights reserved.
NAT
• A NAT-enabled device typically operates at the border of a stub network.
777© 2004, Cisco Systems, Inc. All rights reserved.
NAT Terms
• Inside Local Addresses – An IP address assigned to a host inside a network. This address is likely to be a RFC 1918 private address.
• Inside Global Address – A legitimate IP address assigned by the NIC or service provider that represents one or more inside local IP address to the outside world.
• Outside Local Address - The IP address of an outside host as it known to the hosts in the inside network.
• Outside Global Address - The IP address assigned to a host on the outside network. The owner of the host assigns this address.
888© 2004, Cisco Systems, Inc. All rights reserved.
NAT Features
• Static NAT is designed to allow one-to-one mapping of local and global addresses.
Outside
10.0.0.10 DA
179.9.8.10
Inside
Internet
179.9.8.1010.0.0.10
179.9.8.8010.0.0.2
Inside Global IP Address
Inside Local IP Address
NAT Table10.0.0.2
http://179.9.8.10
DA
10.0.0.10
999© 2004, Cisco Systems, Inc. All rights reserved.
NAT Features
• Dynamic NAT is designed to map a private IP address to a public address.
Outside
10.0.0.10
Inside
Internet
179.9.8.1010.0.0.10
179.9.8.8010.0.0.2
Inside Global IP Address
Inside Local IP Address
NAT Table10.0.0.2
SA
10.0.0.2
SA
179.8.9.80
101010© 2004, Cisco Systems, Inc. All rights reserved.
PAT Features
• PAT uses unique source port numbers on the inside global IP address to distinguish between translations.
SA
10.0.0.3:2333
Outside
Inside
Internet
10.0.0.2
SA
10.0.0.2:1456
SA
179.9.8.80:1345
10.0.0.3
179.9.8.80:233310.0.0.3:2333
179.9.8.80:145610.0.0.2:1456
Inside Global IP Address
Inside Local IP Address
NAT Table
126.23.2.2:80126.23.2.2:80
202.6.3.2:80202.6.3.2:80
Outside Global IP Address
Outside Local IP Address
SA
179.9.8.80:2333
202.6.3.2
126.23.2.2
111111© 2004, Cisco Systems, Inc. All rights reserved.
NAT Benefits
• Eliminates re-assigning each host a new IP address when changing to a new ISP
• Eliminates the need to re-address all hosts that require external access, saving time and money
• Conserves addresses through application port-level multiplexing
• Protects network security
121212© 2004, Cisco Systems, Inc. All rights reserved.
Configuring Static NAT Translations
• Static translation are entered directly into the configuration and are permanent in the translation table
Router(config)#ip nat inside source static
10.6.1.20 171.69.68.10
131313© 2004, Cisco Systems, Inc. All rights reserved.
Inside/Outside interface
• An interface on the router can be defined as inside or outside
• Translations occur only from inside to outside interfaces or vice versa—never between the same type of interface
NATInside InterfaceInside
Interface
Inside Network Outside Network
ip nat inside ip nat outsideInside Host Outside Host
Router(config-if)#ip nat inside
Outside InterfaceOutside Interface
151515© 2004, Cisco Systems, Inc. All rights reserved.
Dynamic Translations
• Dynamic translation specify the pool of global addresses that inside addresses can be translated into
Router(config)#ip nat pool nat-pool
179.9.8.80 179.9.8.95 netmask 255.255.255.240
• Dynamic translations use access lists to identify IP addresses that NAT should create translations for
Router(config)#ip nat inside source list 1 pool nat-pool
Router(config)#access-list 1 permit 10.0.0.0 0.0.255.255
171717© 2004, Cisco Systems, Inc. All rights reserved.
Configuring PAT
• Establishes overload translation, specifying the IP address to be overloaded as that assigned to an outside interface
Router(config)#ip nat inside source list 1
interface serial0/0 overload
• Establishes overload translation, specifying the IP address to be overloaded as that assigned to a pool name
Router(config)# ip nat pool nat-pool2 179.9.8.20
netmask 255.255.255.240
Router(config)#ip nat inside source list 1
pool nat-pool2 overload
191919© 2004, Cisco Systems, Inc. All rights reserved.
Clearing the NAT Translation Table
• Clears all dynamic address translation entries
Router#clear ip nat translation *
232323© 2004, Cisco Systems, Inc. All rights reserved.
DHCP
• DHCP works by providing a process for a server to allocate the IP information to clients.
242424© 2004, Cisco Systems, Inc. All rights reserved.
• Clients lease the information from the server for an administratively defined period.
DHCP
252525© 2004, Cisco Systems, Inc. All rights reserved.
BOOTP and DHCP Differences
• DHCP defines mechanisms through which clients can be assigned an IP address for a finite lease period. This lease period allows for re-assignment of the IP address to another client later, or for the client to get another assignment, if the client moves to another subnet. Clients may also renew leases and keep the same IP address.
• DHCP provides the mechanism for a client to gather other IP configuration parameters, such as WINS and domain name.
262626© 2004, Cisco Systems, Inc. All rights reserved.
Major DHCP Features
• Automatic Allocation
• Manual Allocation
• Dynamic Allocation