CCA 1200 Leaflet
5
CCA-1200 Cr oss Conv eyor UK: T : +44 1904 608 999 E: [email protected] China: T : +86 755 8222 5976 E: [email protected] om www.sheppee.com The design of the cross conveyor has a major i nfluence in the overall ware handling efficiency . Cross conveyors work in the most difficult conditions with wear and tear being common due to the nature of the mechanical design. The CCA-1200 has many in-built features, which allow for critical areas to be adjusted during a normal production run. Having this ability reduces fallen ware and is essential for accurate lehr loading and improved production efficiencies. Features and Benefits • Simple robust construction • Individual deadplate assembly with both tilt and lift feature • Adust able trans fer de adpl ate, idle r oller and wear plate • Full adjustment of height and linear position of conveyor beams • Quick interchangeable deadplates • Abili ty to c ount eract heat disto rtion • Low and simple maintenance • Safe and reliable operation • Consistent and trouble free container handling • Can be used in conjunction with Sheppee ware handling system • Suitable for any lehr width • Quick change wear strips
Transcript of CCA 1200 Leaflet
8/10/2019 CCA 1200 Leaflet
http://slidepdf.com/reader/full/cca-1200-leaflet 1/4
CCA-1200 Cross Conveyor
UK: T: +44 1904 608 999 E: [email protected] China: T: +86 755 8222 5976 E: [email protected] www.sheppee.com
The design of the cross conveyor has a major influence in the overall ware handling efficiency.
Cross conveyors work in the most difficult conditions with wear and tear being common due to
the nature of the mechanical design. The CCA-1200 has many in-built features, which allow for
critical areas to be adjusted during a normal production run. Having this ability reduces fallen
ware and is essential for accurate lehr loading and improved production efficiencies.
Features and Benefits
• Simple robust construction
• Individual deadplate assembly with both tilt and lift
feature
• Adustable transfer deadplate, idle roller and wear
plate
• Full adjustment of height and linear position of
conveyor beams
• Quick interchangeable deadplates
• Ability to counteract heat distortion
• Low and simple maintenance
• Safe and reliable operation
• Consistent and trouble free container handling
• Can be used in conjunction with Sheppee ware
handling system
• Suitable for any lehr width
• Quick change wear strips
8/10/2019 CCA 1200 Leaflet
http://slidepdf.com/reader/full/cca-1200-leaflet 2/4
This page folds in
UK: T: +44 1904 608 999 E: [email protected] China: T: +86 755 8222 5976 E: [email protected] www.sheppee.com
CCA-1200 Cross Conveyor
Conveyor Chain
ALLGUARD FX
Link spacer conveyor chain
(Recommended standard
for containers 40mm
diameter and above)
Lifeguard *
All link conveyor chain
(Recommended for
containers less than 40mm
diameter)
*Additional cost
Technical Specification
Drive Requirements:
• For use with customers synchronous or servo motor or integrated with Sheppee ware handling system.
Service Requirements:
• Connection to Lincoln centralised lubrication system (if applicable).
8/10/2019 CCA 1200 Leaflet
http://slidepdf.com/reader/full/cca-1200-leaflet 3/4
www.sheppee.com
CCA-1200 Cross Conveyor
CCA-1200 Drawings
Deadplate AdjustFloor Mounted Legs
Idle Roller Side
8/10/2019 CCA 1200 Leaflet
http://slidepdf.com/reader/full/cca-1200-leaflet 4/4
CCA-1200 Cross Conveyor
UK: Halifax Way, Airfield Business Park, Elvington, York, YO41 4AU
T: +44 1904 608 999 F: +44 1904 608 777E: [email protected]
China: Sheppee-AP Sales & Support Centre, Shenzhen, China,
T: +86 755 8222 5976 E: [email protected]
www.sheppee.com
Consumables
Part Number: Description:
CC/046 Deadplate
CC/238 Idler Sprocket
CCA/1150-FEV Idle Sprocket
Assembly
C315-6206HT Bearing
Part Number: Description:
CC/239 Shaft
CC/304 Transfer
Deadplate
CC/439 TransferDeadplate*
(*when running with a VFT-1000 transfer)
For additional parts refer to assembly drawings.
V1.0
