Cato Concept

12

description

Brochure - English

Transcript of Cato Concept

Page 1: Cato Concept
Page 2: Cato Concept

2 LEVITH COUNTER CONCEPTprovides your business with a professional image and a modern, vibrant first impression. Unlike any other counter programme it looks like a table, acts like a storage system, and performs like a work station.

THE LOOksLEVITH is style, elegance and minimalism - key words behind this groundbreaking levitating design. The clear cubic look is in line with the contemporary architectural expression. Colour and material options make it feasible to decorate any interior and let you express you own corpo-rate identity.

THE maTERIaLs LEVITH comes in a range of diverse and complementary materials such as a beautiful selection of veneers and col-our finishes. modern high-end materials such as composite, stainless steel and non-translucent glass provides elegance and transparency. Good craftsmanship simply pinpoints LEVITH’s elegance and quality.

THE PRINCIPLELEVITH is simplicity allowing complexity. a basic set of ele-ments makes it possible to tailor the counter to the compa-ny’s individual needs. Its interchangeable components add superb adaptability to room size and room interior.

THE CHaRaCTERLEVITH is adapted to modern use with emphasis on con-temporary design, multiple options quality, and ease of use. LEVITH is technologically adept and raises the level of performance.

Pr

od

uc

t st

ory

Product story

Page 3: Cato Concept

3

co

mP

osi

tio

ns

Full WinG: TyPE dEsIGNaTION wHEN 4 sIdEmOdULEs aRE aTTaCHEd TO bOTH UPPER aNd LOwER PaRTs Of THE CENTERmOdULE

compositions

Page 4: Cato Concept

4

co

mP

osi

tio

ns

A

AtoP WinG: TyPE dEsIGNaTION wHEN 2 sIdEmOdULEs aRE aTTaCHEd TO THE UPPER PaRT Of THE CENTERmOdULE – 1 ON EaCH sIdE

comPositionsPaRTITIONswhen only side boxes are attached on the upper side modules, adding partitions on each side will create an efficient enclosed office while ensur-ing a sufficient privacy sphere.

Page 5: Cato Concept

5

co

mP

osi

tio

ns

co

mP

osi

tio

ns

cross WinG: TyPE dEsIGNaTION wHEN 2 sIdEmOdULEs aRE aTTaCHEd TO THE CENTERmOdULE – 1 aTTaCHEd TO THE UPPER CENTERmOdULE, THE OTHER TO THE LOwER

comPositions

Page 6: Cato Concept

6

A

A

B

B

ch

Ar

Ac

ter

isti

cs

PROfILE with a counter length up to 2,3 m in excess of the plinth, and a height of 92 cm, without top shelf , LEVITH has an elegant, monumental profile and the floating base gives the LEVITH Counter its very unique levitating appear-ance.

chArActeristicswORksPaCENo other modular counter has an integrated workspace like the LEVITH Counter. One system with a variety of standard components and integrated add-ons. No need for supplementary products.

THE TabLEThe work space is an integrated part of the center mod-ule having same length as the counter itself. a reception counter often needs to accommodate more than one oc-cupant thus the table can be electrically adjusted within the range of 67,5-90,5 cm. The table top is made of white composite as standard.

Page 7: Cato Concept

7

c

dc

d

ch

Ar

Ac

ter

isti

cs

sHadOw GaPstraight shadow lines – both vertical and horizontal – add a sophisticated look and a distinctive appearance.

sIdEbOxOpen cabinets can be fitted with different functions such as: drawers, doors or shelves. side boxes width 60 and 90 cm have partitions attached. functions like drawers and doors come with ‘’push to open’’ functions to avoid need for handles.

Page 8: Cato Concept

8

co

mP

on

en

ts

CENTERmOdULEstandard widths are 160, 180 and 200 cm, height is 92 cm. The center module consists of front (depth 20 cm), plinth and an electrical height adjustable table (depth 70 cm). front construction accommodates concealed cabling and easy access to inside wiring.

sIdEmOdULEstandard widths are 20, 60 and 90 cm, height is 36,5 cm. shadow gap between connected parts. Inside wiring is possible due to inside construction. you may choose between upper and lower sideboxes, a combo or simply none at all.

comPonents

Page 9: Cato Concept

9

co

mP

on

en

ts

sIdEbOxstandard widths are 20, 60 and 90 cm, height is 36,5 cm. They are attached to the backside of the sidemodules. Each side module can be fitted with 1 side box. you may choose between upper and lower sideboxes, a combo or simply none at all.

INTERIOREach 60 or 90 cm sidebox can be fitted with shelves, doors and drawers. a pen tray for drawers is available.

On a 60 cm sidebox only the one side can be fitted with above add ons – on the 90 cm sidebox both sides.

comPonents

Open

shelve

drawer

door

Pen tray

Page 10: Cato Concept

10

co

nst

ru

cti

on

s

EdGEsThe LEVITH Counter has no visible joints. Every module looks as if it was cut in one piece. all joints of the indi-vidual modules are bevelled on edges (all parts are folded together). an incredible strong way to connect parts.

sHadOw GaPIncorporated between center and side modules and side boxes. The 1x1 cm shadow gap comes in any finish mate-rial. standard finishes are: black lacquer, counter colour, or stainless steel. Regardless of finish selected, all add a nice design accent.

wIRINGIt is possible to conceal in-frame wiring within all front modules enabling you to add electric or IT components according to your needs. for easy access, the backside of the lowest center module is mounted with 3-4 doors with brushes on top.

LaCqUERsThe counter can be produced in any colour you wish within the RaL or NCs colour scale – gloss 30.

qUaLITy& maTERIaLsall components applied are carefully chosen and for a product as LEVITH materials of course are of first grade quality.

constructions

Page 11: Cato Concept

11

co

un

ter

sP

ec

Als

VENEERsflat cut veneers in the same width as the counter surface to give the counter as beautiful a structure and character as possible. Veneer is forth running on both center and sidemodules. as standard finishes we have chosen: maple, ash, black stained ash, walnut and smoked oak.

“LEVITH is a piece of system furniture combining the essence of architecture, design, function and application into one unit. With a clear cubic and an almost levitating design LEVITH meets the requirements for a contemporary cohesive expres-sion. LEVITH’S modularity means your creativity. Its functionality gives room for your versatility and its adaptability allows for your very own individuality – in other words: Simplicity made simple.

counter sPeciAls

dEsIGNGROUP aRCHITECTs a/sdesignGroup architects are co-owned by archi-tect Christian Giese and industrial designer/architect morten Ulf Jørgensen. Christian Giese and morten Jørgensen teamed up to design the LEVITH counter system for Cato Concept.

asH

smOkEd Oak maPLE

bLaCk sTaINEd asHwaLNUT

Page 12: Cato Concept

cAto concePtUggeløse bygade 74dK-3540 lynge

+45 2131 8489

[email protected]

counterscomPosite &Project Furniture