Catia Freestyle

FreeStyle Sketch Tracer

Preface Getting Started Basic Tasks Workbench

Description Index

Dassault Systmes 1994-2000. All rights reserved.

TOC

file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskugtoc.htm [9/22/2000 2:29:33 PM]

PrefaceCATIA Version 5 FreeStyle Sketch Tracer is a new-generation tool used to import stylist'sdrawings into the 3D world.

Using this product you can convert 2D images into a 3D scene to create 3D geometry fromyour hand drawings, or other source such as pictures. You position the 3D model in relation tothe sketch and, in conjunction with other CATIA products, create geometric outlines directlyover the sketches.

The CATIA - FreeStyle Sketch Tracer User's Guide has been designed as an aid to using theFreeStyle Sketch Tracer by itself, but also in conjunction with other CATIA Version 5 FreeStyleproducts or any other CATIA workbench.

Using This GuideMore Information

Preface

file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskugpr01.htm [9/22/2000 2:29:54 PM]

Using This GuideThis User's Guide is intended for the user who need to become quickly efficient with the CATIAVersion 5 FreeStyle Sketch Tracer. Before reading it, you should be familiar with the basic CATIA Version 5 concepts, such as thedocument windows, standard toolbars and menus.

To make the most out of this book, we suggest that a beginning user reads the Getting Startedchapter first of all.

Using This Guide


Where to Find More InformationPrior to reading this book, we recommend that you read the CATIA Version 5 InfrastructureUser's Guide that describes generic capabilities common to all CATIA Version 5 products. Italso describes the general layout of CATIA V5, and interoperability between workbenches.

Also read the CATIA Product Structure User's Guide that presents the component structure andmanagement.

See also the Conventions.

More Information


ConventionsCertain conventions are used in CATIA, ENOVIA & DELMIA documentation to help yourecognize and understand important concepts and specifications. The following textconventions may be used: The titles of CATIA documents appear in this manner throughout the text. File -> New identifies the commands to be used.

The use of the mouse differs according to the type of action you need to perform.

Use thismouse button, whenever you read

Select (menus, commands, geometry in graphics area, ...)Click (icons, dialog box buttons, tabs...)Double-clickShift-clickCtrl-clickCheck (check boxes)DragDrag and drop (icons onto objects, objects onto objects)DragMove

Right-click (to select contextual menu)

Graphic conventions are denoted as follows:

indicates the estimated time to accomplish a task.

indicates a target of a task.

indicates the prerequisites.

indicates the scenario of a task.

indicates tips

indicates a warning.

Conventions

file:///E|/WWW/FmoCXR5/CATEnglish/commain.doc/src/conventions.htm (1 of 2) [9/22/2000 2:29:58 PM]

indicates information.

indicates the end of a task.

indicates functionalities that are new or enhanced with this Release.Enhancements can also be identified by a blue-colored background in the left-handmargin.

Conventions

file:///E|/WWW/FmoCXR5/CATEnglish/commain.doc/src/conventions.htm (2 of 2) [9/22/2000 2:29:58 PM]

Getting StartedThe following tutorial aims at giving you a feel of what you can do with CATIA - FreeStyleSketch Tracer It provides a step-by-step scenario showing you how to use key capabilities.

The main tasks proposed in the chapter are:

Entering The WorkbenchImporting SketchesSketch Positioning

All together, this scenario should take about 10 minutes to complete.

Getting Started

file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskuggs01.htm [9/22/2000 2:30:02 PM]

Entering The WorkbenchThis task shows how to open a activate the FreeStyle Sketch Tracer workbench.

Select the File -> New commands (or click the New icon).1.

The New dialog box is displayed, allowing you to choose the typeof the document you need.

Select Product in the List of Types field and click OK.A CATProduct document is opened.

2.

The use of a CATProduct-type document is especially useful toaccommodate several sketches, one for each view for example,or one sketch for several parts (located in CATPart documents).

Choose Designer Workbench from the Start -> Infrastructure menu.3. The FreeStyle Sketch Tracer workbench is loaded.

Entering The Workbench

file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskuggs02.htm (1 of 2) [9/22/2000 2:30:04 PM]

The FreeStyle Sketch Tracer workbench document is made of:the specification tree and the geometry area in the main windowspecific toolbara number of contextual commands available in the specification tree and in the geometry.Remember that these commands can also be accessed from the menu bar.

If you wish to use the whole screen space for the geometry, remove the specification tree clicking offthe View -> Specifications menu item, or using the F3 key.



Importing a SketchThis task shows you how to load a sketch into CATIA.

Click the Create an Immersive sketch icon .1.

A file selector popsup into which youcan navigate to openthe sketch you wish.

Here, navigate to theSamples directoryand select theSampleCar1_Top.TIFimage.

Click Open.The image is loaded and the Sketch Parameters dialog box is displayed.

2.

Importing A Sketch


Importing A Sketch


Make sure the correct visualization options are active by selecting the ApplyCustomized View icon in the View ->Render Style command. If this option isnot active, you may view only a black picture.You are now ready to set up the sketch positioning according to the import mode youchoose.

Importing A Sketch


Positioning The SketchThis task shows you how to define the position a sketch in 2D.

From theSketchParametersdialog box,choose theSet cylindricalview icon.

1.

The loaded imagelooks like this:

Sketch Positioning


The displayed axis-system allows you to define the document's origin. Move thepointer overtheaxis-system'smiddle point.A manipulatoris displayedand thepointer turnsinto a hand.

2.

Click themiddle pointand drag it tothe front ofthe car,aligning thehorizontal lineonto the leftside of thecar.

3.

Sketch Positioning


Repeat thisoperation withthemanipulator tothe right, thatyou move tothe back ofthe car.

4.

With thepointer stillover the sizemanipulator,right-click,and choosethe Editcontextualmenu item.

5.

TheTunerdialogbox isdisplayed.

CheckRelative, thenTrue Length,and enter 400as the exactlength fromthe image'saxis-systemmiddle point

6.

Sketch Positioning


to thismanipulator,representingthe size of thecar.

Repeat theframepositioningoperation,using the topmanipulator,to align thetop of theframe with theright side ofthe car.

7.

Click OK in the Sketch Parameters dialog box.7.

The image has been imported into the .CATProduct document and a Paintingfeature has been added to the specification tree.

8.

Sketch Positioning


You now are ready to create geometry based on this imported image, using others CATIAproducts, such as CATIA FreeStyle Shaper, or CATIA Generative Shape Design, forexample.

Sketch Positioning


Basic TasksEntering The Workbench

Importing Sketches2D Positioning

Managing an Imported Sketch

Basic Tasks

file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskugbt0000.htm [9/22/2000 2:30:37 PM]

Entering The WorkbenchThis task shows how to open a activate the FreeStyle Sketch Tracer workbench.

Select the File -> New commands (or click the New icon).1.

The New dialog box is displayed, allowing you to choose the typeof the document you need.

Select Product in the List of Types field and click OK.A CATProduct document is opened.

2.

The use of a CATProduct-type document is especially useful toaccommodate several sketches, one for each view for example,or one sketch for several parts (located in CATPart documents).

Choose Designer Workbench from the Start -> Infrastructure menu.3. The FreeStyle Sketch Tracer workbench is loaded.


file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskugbt0100.htm (1 of 2) [9/22/2000 2:30:38 PM]

The FreeStyle Sketch Tracer workbench document is made of:the specification tree and the geometry area in the main windowspecific toolbara number of contextual commands available in the specification tree and in the geometry.Remember that these commands can also be accessed from the menu bar.

If you wish to use the whole screen space for the geometry, remove the specification tree clicking offthe View -> Specifications menu item, or using the F3 key.You could also directly choose Designer Workbench from the Start menu. It would automatically open anew CATProduct document, provided there already is a CATIA session running.



Importing a SketchThis task shows you how to load a sketch into CATIA.

A CATProduct must be open and the FreeStyle Sketch Tracer workbench active.

Click the Create an Immersive sketchicon .1.

The Image File Selectordialog box pops up into whichyou can navigate to open thesketch you wish.

Here, navigate to the Samplesdirectory and select theSampleCar1_side.TIF image.

Click Open.The image is loaded and the Sketch Parameters dialog box is displayed.

2.

Importing Sketches


Make sure the correct visualization options are active by selecting the Apply Customized View icon in the View ->Render Style command. If this option is not active, you may view only a black picture.You are now ready to set up the sketch positioning according to the import mode you choose.

Importing Sketches


Positioning in 2D ModeThis task shows you how to define the position a sketch according to a cylindrical view: front, top, bottom or sideview within the document.A image has been loaded as described in Importing a Sketch.

From the Sketch Parameters dialog box,choose the Set cylindrical view icon.

1.

The loaded image looks like this:

The displayed axis-system allows you to define the document's origin.

2D Positioning


Move the pointer over the axis-system's middlepoint.A manipulator is displayed and the pointerturns into a hand.

2.

Use the standard CATIA manipulations(translation, rotation, and so forth) to positionthe main axis-system at the correct location.

3.

Release the axis-system's middle point whenyou are satisfied with its position.

4.

Move over to one of the frame's corner.5.

Using the manipulators, you can rotate or zoom the positioning frame, depending on the selectedarrow.

Increasing/decreasingRotating

With the pointer still over the size manipulator,right-click, and choose the Edit contextualmenu item.

6.

The Tuner dialog box is displayed,allowing you to enter exact values, inrelation to the document's origin.

This let's you define the model's size.

2D Positioning


The Relative option is used to positionthe frame corner in relation to the imageaxis-system's origin. In this case you canchoose to work in True Length mode, i.e.the value you enter corresponds to thelength between the axis-system's originand the defined point.

The Reset Origin button enable to switchthe reference origin onto any corner ofthe frame.

Once you are satisfied with the framepositioning, click OK in the dialog box.

7.

A Painting feature has been added to thespecification tree.

You can now manipulate the image asany element into a .CATProduct or.CATPart document.

Click on the Focus Off text at the bottom of the image to reset the image parallel to the screen. You can alsochoose the Activate Viewpoint contextual menu.

Once you have clicked this text, it changes to Focus On and lets you zoom or move (grabbing the red triangles) the image within the document, independently of the compass.

To return to standard document manipulations, click the Focus On text, or choose the the Deactivate Viewpointcontextual menu.

2D Positioning


2D Positioning


Managing an Imported SketchThis section shows how to manage imported sketches within the CATIA environment.

Refresh an image: double-click the image frame, choose the Open icon in the dialog boxand choose an image.Copy/paste an image: select an image, change document, paste the image

Import another image: select another image to be imported.

Managing an Imported Sketch


Refreshing an Imported SketchThis task shows how to refresh an image, that is update the document into which it hasbeen imported when the sketch has been modified outside CATIA.Open the CarSideView.CATProduct document from the Samples directory and selectDesigner Workbench from the Start -> Infrastructure menu.

Double-click the image name from the specification tree(Painting.1).

1.

The Sketch Parameters dialog box is displayed,containing the imported image's name andlocation path.

Click the Reload Image file icon from the dialog box.2.

The image is updated taking into account modifications done outside CATIA.If needed, re-position the frame on the new image.3. Click OK to save this new image within the Painting.x feature.4.

Refreshing an Imported Sketch


Copying/Pasting A SketchThis task shows how to copy/paste an image within the same document or within anotherdocument.Open the CarSideView.CATProduct and GettingStartedResults.CATProduct documentsfrom the Samples directory, select Designer Workbench from the Start -> Infrastructuremenu, then tile the windows, using the Window -> Tile Horizontally menu item.

Copying/Pasting a Sketch


Right-click the Painting.1 feature from the specification tree of theGettingStartedResults.CATProduct document (source document).

1.

Choose the Copy menu item.2.

Right-click Painting Gallery from the specification tree within theCarSideView.CATProduct document (target document), and choose the Paste menuitem.

3.

The copied Painting.1 feature is copied into the targetdocument.

Copying/Pasting a Sketch


Importing Another SketchThis task shows how to import second image within the a given document.

Open the CarSideView.CATProduct document from the Samples directory and selectDesigner Workbench from the Start -> Infrastructure menu.

Click the Create an Immersive sketch icon.1.

The Image File Selector dialog box pops up. By default, it opens to thelocation of the last imported image.If needednavigate to anew folder,select a newimage, andclick Open.

2.

Theimage isloadedand theSketchParametersdialogbox isdisplayed.

Position the image as described in Positioning in 2D Mode, then click OK in theSketch Parameters dialog box

3.

Thesecondimage isadded tothecurrentPaintingGallery.

Importing Another Sketch


Importing Another Sketch


Workbench DescriptionThis chapter describes the various menus, submenus, items and toolbar of the FreeStyleSketch Tracerr workbench.

Menu BarToolBar

Specification Tree

Workbench Description

file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskugwd0000.htm [9/22/2000 2:31:14 PM]

Menu BarThere are no menu command specific to the FreeStyle Sketch Tracer. Therefore you can referto general menu commands as described in the CATIA Version 5 Infrastructure User's Guide.Refer to the CATIA Menu Bar section, and to the commands related to .CATProductdocuments.

Menu Bar


ToolBarThis section describes the FreeStyle Sketch Tracer toolbar.

See Importing A Sketch

ToolBar


Specification TreeWithin the Sheet Metal Design workbench, you can generate a number of featuresthat are identified in the specification tree by the following icons.

Painting

Specification Tree


IndexNumerics

2D positioning

C commands

sketch import copying

I importing

sketch second sketch

Mmanaging images

P pasting

S specification tree

Index

file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskugix.htm (1 of 2) [9/22/2000 2:33:17 PM]

U updating

Index

file:///E|/WWW/FmoCXR5/FskEnglish/fskug.doc/src/fskugix.htm (2 of 2) [9/22/2000 2:33:17 PM]

Local DiskTOCPrefaceUsing This GuideMore InformationConventionsGetting StartedEntering The WorkbenchImporting A SketchSketch PositioningBasic TasksEntering The WorkbenchImporting Sketches2D PositioningManaging an Imported SketchRefreshing an Imported SketchCopying/Pasting a SketchImporting Another SketchWorkbench DescriptionMenu BarToolBarSpecification TreeIndexIndex

Catia Freestyle

Documents

Transcript of Catia Freestyle