Caterpillar Skid Steer Loaders The Educational Services ...
7
CATERPILLAR MACHINE PRICE LIST 2384D 2384D KNUCKLEBOOM LOADER Ship Weight LIST PRICE LAGRANGE, GA, USA lbs AT DEALER Standard Equipment: POWERTRAIN Engine, Cat C4.4 w/ACERT technology, 129.5 kw (174 hp) gross @ 1800 rpm, EPA/ARB tier 4 final and EU stage IV cert. with Cat Clean Emmissions Module (CEM); electric fuel priming pump; air precleaner; 2-stage air cleaner, enlarged cooling HYDRAULICS Hydraulic arrangement: -Bar slasher/delimber subframe valve and lines group -Hydraulic oil fill pump (24V electric) -Hydraulic completer ELECTRICAL 24V system with master disconnect and circuit breaker protection 95 amp alternator Two cab mounted long range flood lights Two 12V power points CB radio ready-includes mounting bracket 20 circuit for operation of delimber, slasher, outriggers Stabilizer movement alarm Pilot enable movement alarm OPERATOR ENVIRONMENT Deluxe pressurized isolation mounted cab -Swing out front guard meets SAE J2267 (OFPS) -Tinted safety glass -Lexan skylight -Air conditioner/heater -High back suspension seat with lumbar support -Electronic engine/machine monitoring system -Joystick control (pilot hyd actuation) for bar slasher/ delimber arrangement- forestry control pattern -Single rocker pedal swing control -Manual bar-up -Electric stabilizer controls -Pilot shut-off button -Push button throttle control Auxiliary work lights -2 rear cab mounted side facing lights -2 forward work lights -1 engine compartment service light Radio FRAMES Lower chassis: -Four stabilizer legs -Bolt on skid resistant fenders -Heavy duty truck/trailer installation kit -One subframe ladder with handrail Caterpillar Skid Steer Loaders Price Pages 1/2/19 -2384D The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS Grounds Equipment Bid #ESCNJ 18/19-25 1 Bid Term: 2/20/19 - 2/19/21
Transcript of Caterpillar Skid Steer Loaders The Educational Services ...
CATERPILLAR MACHINE PRICE LIST
2384D
2384D KNUCKLEBOOM LOADER Ship Weight LIST PRICE
LAGRANGE, GA, USA lbs AT DEALER
Standard Equipment:
POWERTRAINEngine, Cat C4.4 w/ACERT technology,129.5 kw (174 hp) gross @ 1800 rpm,EPA/ARB tier 4 final and EU stage IVcert. with Cat Clean Emmissions Module(CEM); electric fuel priming pump; airprecleaner; 2-stage air cleaner,enlarged cooling
HYDRAULICSHydraulic arrangement:-Bar slasher/delimber subframe valveand lines group-Hydraulic oil fill pump (24V electric)-Hydraulic completer
ELECTRICAL24V system with master disconnect andcircuit breaker protection95 amp alternatorTwo cab mounted long range flood lightsTwo 12V power pointsCB radio ready-includes mounting bracket20 circuit for operation of delimber,slasher, outriggersStabilizer movement alarmPilot enable movement alarm
OPERATOR ENVIRONMENTDeluxe pressurized isolation mounted cab-Swing out front guard meets SAE J2267(OFPS)-Tinted safety glass-Lexan skylight-Air conditioner/heater-High back suspension seat with lumbarsupport-Electronic engine/machine monitoringsystem-Joystick control (pilot hyd actuation)for bar slasher/ delimber arrangement-forestry control pattern-Single rocker pedal swing control-Manual bar-up-Electric stabilizer controls-Pilot shut-off button-Push button throttle controlAuxiliary work lights-2 rear cab mounted side facing lights-2 forward work lights-1 engine compartment service lightRadio
FRAMESLower chassis:-Four stabilizer legs-Bolt on skid resistant fenders-Heavy duty truck/trailer installationkit-One subframe ladder with handrail
Caterpillar Skid Steer Loaders Price Pages 1/2/19 -2384D
The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS
Grounds Equipment Bid #ESCNJ 18/19-25
1 Bid Term: 2/20/19 - 2/19/21
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY 2384D-001
Caterpillar Skid Steer Loaders Price Pages 1/2/19 -2384D
The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS
Grounds Equipment Bid #ESCNJ 18/19-25
2 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
2384D
2384D KNUCKLEBOOM LOADER Ship Weight LIST PRICE
LAGRANGE, GA, USA lbs AT DEALER
2018 YOY list price reductions will be offset by reductions indiscounts or merchandising support.
459-0207 2384D KNUCKLEBOOM LOADER 0 $227,120...............................
LANE 3 - AVAILABLE FROM LAGRANGE, GA FACTORY
0P-4232 2384D MISC MATERIAL 0 NC.....................................
AVAILABLE FROM LAGRANGE, GA FACTORY
Only reference numbers that have the text"ALSO AVAILABLE ON A MISCELLANEOUS ORDER" can be used on a MISC order.
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY 2384D-002
Caterpillar Skid Steer Loaders Price Pages 1/2/19 -2384D
The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS
Grounds Equipment Bid #ESCNJ 18/19-25
3 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
2384D
REF Ship Weight LIST PRICE
USE NO. lbs AT DEALERLANE 2 MANDATORY
LANE SELECTION
0P-9003 LANE 3 ORDER 0 NC........................................
BOOMS, STICKS, AND LINKAGES
BOOM
L 449-8586 BOOM, STANDARD 0 NC.....................................
32�6" reach (9.9 m) - 2 piece boom and sticklinkage arrangement
HEELS
L 439-7428 HEEL, V BOLT ON, LONG, 10" EXT 0 NC.........................
L 439-7425 HEEL, VV BOLT ON, LONG, 10"EXT 0 NC........................
HYDRAULICS
VALVE ARRANGEMENT
L 495-4278 VALVE, STANDARD 0 NC....................................
COMPLETER
L 469-5635 HYDRAULIC ARR, COMPLETER 0 NC.............................
DELIMBER HYDRAULICS
L 437-5236 HYDRAULIC ARR, DELIMBER 0 NC..............................
Bar slasher/delimber subframe valve and lines group
TRAILER LANDING GEAR HYDRAULICS
L 369-5254 HYDRAULIC ARR, TRAILER 0 NC................................
Controls and plumbing for hydraulic landing gear trailerREQUIRES: 517-5880 Delimber, PRE426
517-0664 Trailer, Pitts, W/Crawler SuspL 448-3411 HYD, TRLR, OMISSION, W/VALVE 43 $1,495........................
Includes hydraulic landing gear but NOT hosesREQUIRES: 526-6443 Trailer, Omission
L 452-2497 HYD, TRLR, OMISSION, W/O VALVE 3 $580.......................
Does NOT include hydraulic landing gearREQUIRES: 526-6443 Trailer, Omission
LINE GROUPS
CONDITIONER SELECTION
L 464-6428 CONDITIONER, STANDARD 0 NC...............................
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY 2384D-003
Caterpillar Skid Steer Loaders Price Pages 1/2/19 -2384D
The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS
Grounds Equipment Bid #ESCNJ 18/19-25
4 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
2384D
REF Ship Weight LIST PRICE
USE NO. lbs AT DEALERLANE 2 MANDATORY
ELECTRICAL
SWIVEL
L 515-5394 SWIVEL, 20 CIRCUIT ELECTRICAL 0 NC..........................
20 circuit for operation of delimber, slasher, outriggers
COMPLETER
L 479-6896 ELECTRICAL, COMPLETER 0 NC................................
OPERATOR ENVIRONMENT
CAB
L 468-1054 CAB, STANDARD 0 NC......................................
Deluxe pressurized isolation mounted cab
CONTROL SELECTION
L 513-7942 JOYSTICK ARR, STANDARD 0 NC..............................
Single rocker pedal swing control, manual bar-up, electricstabilizer controls, pilot shut-off button, push buttonthrottle control
WORK TOOLS
TRAILER
L 517-0664 TRAILER, PITTS, W/CRAWLER SUSP 0 $38,760........................
Pitts Trailer (KB50-DHL) with hydraulic landing gear,CRAWLER SUSPENSION (295/75R22.5 14 ply radial tires)and delimber lines group; includes installation ofloader & delimber.REQUIRES: 517-5880 Delimber, PRE426
L 526-6443 TRAILER, OMISSION 0 NC....................................
ONLY FOR USE WITH: 448-3411 HYD, Trlr, Omission W/Valve452-2497 HYD, Trlr, Omission, W/O Valve
DELIMBER
ALSO AVAILABLE ON A MISCELLANEOUS ORDER
L 517-5880 DELIMBER, PRE426 0 $55,600.....................................
0 $55,600 NIPRE426 LF (4 knife) Delimber with Topping Saw TMS
L 526-6445 DELIMBER, OMISSION 0 NC...................................
ONLY FOR USE WITH: 526-6443 Trailer, Omission
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY 2384D-004
Caterpillar Skid Steer Loaders Price Pages 1/2/19 -2384D
The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS
Grounds Equipment Bid #ESCNJ 18/19-25
5 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
2384D
REF Ship Weight LIST PRICE
USE NO. lbs AT DEALERLANE 2 MANDATORY
WORK TOOLS (CONT.)
LOG GRAPPLE
ALSO AVAILABLE ON A MISCELLANEOUS ORDER
L 517-5475 GRAPPLE, PRE5055 SN 0 $20,660..................................
0 $20,660 NIStraight narrow jaw
L 517-5476 GRAPPLE,PRE5055 SN,3 PORT SWVL 0 $21,860.......................
0 $21,860 NIStraight narrow jaw with 3 port swivel allows for grapplesaw mounting
L 517-5478 GRAPPLE, PRE5055 TW 0 $20,660.................................
0 $20,660 NITapered wide jaw
L 517-5479 GRAPPLE,PRE5055 TW,3 PORT SWVL 0 $21,860.......................
0 $21,860 NITapered wide jaw with 3 port swivel allows for grapplesaw mounting
L 526-6444 GRAPPLE, OMISSION 0 NC....................................
GRAPPLES - NOT INSTALLED ONLY
ONLY AVAILABLE ON A MISCELLANEOUS ORDER
P 517-5482 GRAPPLE,PRE4548 SN,3 PORT SWVL 0 $20,440 NI.......................
Straight narrow jaw with 3 port swivel allows for grapplesaw mountingONLY FOR USE WITH: 0P-4232 2384D Misc Material
P 517-5485 GRAPPLE,PRE4548 TW,3 PORT SWVL 0 $20,440 NI.......................
Tapered wide jaw with 3 port swivel allows for grapplesaw mountingONLY FOR USE WITH: 0P-4232 2384D Misc Material
INSTRUCTIONS
DECALS
432-4244 DECALS, ANSI 1 NC........................................
Standard ANSI decal package required for all USA shipments
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY 2384D-005
Caterpillar Skid Steer Loaders Price Pages 1/2/19 -2384D
The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS
Grounds Equipment Bid #ESCNJ 18/19-25
6 Bid Term: 2/20/19 - 2/19/21
CATERPILLAR MACHINE PRICE LIST
2384D
REF Ship Weight LIST PRICE
USE NO. lbs AT DEALERLANE 2 OPTIONAL
OTHER ATTACHMENTS
SAFETY AND SECURITY
L 515-3283 LADDERS, 2 ADDITIONAL SUBFRAME 0 $1,050.......................
Two additional subframe ladders with hand rails (left rearand left front mounting locations)
HYDRAULICS
L 453-8573 ADAPTER, SLASHER 6 $231....................................
Adapts ground slasher hoses to loader hydraulicports (JIC to ORFS)
PACKING
Must Select One
0P-3320 PACK, DOMESTIC TRUCK NC.......................................
0P-3323 PACK, MISC SHIPMENTS NC.......................................
Required when ordering miscellaneous materialwithout ordering a machine.
Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green
US-A-19-01 A U. S. DOLLAR CURRENCY 2384D-006
Caterpillar Skid Steer Loaders Price Pages 1/2/19 -2384D
The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS
Grounds Equipment Bid #ESCNJ 18/19-25
7 Bid Term: 2/20/19 - 2/19/21
