Category 6A UTP Cable - D-Link · 2017-07-21 · CAT6A(Patch Cord) CAT6A(Solid Cord) Conductor...
3
Ethernet Cables 01 Ethernet Cables Applications ■ 10Base-T4、100Base-TX、100VG- ANYLAN、155MbpsATM、622 Mbps ATM、1000Base-T、10GBase-T ■ ISO / IEC 11801、ANSI/TIA/EIA-568- B.2-1、ANSI/TIA/568-B.2-10 ■ Scanned till 500 MHz ■ High-speed and flame retardant Category 6A UTP Cable CAT6A Solid Cables D-LINK Category 6A UTP Cable determines a new performance assessment indicator;when used for horizontal cabling in system,it can provide obvious allowance space to cooperate with our high-performance 6A connection hardware so as to provide network application of 500MHZ bandwidth.This cable can pass the test requirements of TIA/EIA-568-B 500MHZ bandwidth and decrease near-end crosstalk loss (NEXT) and maintained impedance stability.Precise twist pitch matching of different wire pairs and balance design decrease near-end crosstalk loss (NEXT).Maximum bandwidth and SNR allowance are used for the transmission of key tasks.
Transcript of Category 6A UTP Cable - D-Link · 2017-07-21 · CAT6A(Patch Cord) CAT6A(Solid Cord) Conductor...
Ethernet Cables
01
Ethernet Cables
Applications ■ 10Base-T4、100Base-TX、100VG-
ANYLAN、155MbpsATM、622 Mbps ATM、1000Base-T、10GBase-T
■ ISO / IEC 11801、ANSI/TIA/EIA-568- B.2-1、ANSI/TIA/568-B.2-10
■ Scanned till 500 MHz
■ High-speed and flame retardant
Category 6A UTP Cable
CAT6A Solid Cables
D-LINK Category 6A UTP Cabledetermines a new performanceassessment indicator;when used forhorizontal cabling in system,it can provideobvious allowance space to cooperate withour high-performance 6A connectionhardware so as to provide networkapplication of 500MHZ bandwidth.Thiscable can pass the test requirements of
TIA/EIA-568-B 500MHZ bandwidth anddecrease near-end crosstalk loss (NEXT)and maintained impedance stability.Precisetwist pitch matching of different wire pairsand balance design decrease near-endcrosstalk loss (NEXT).Maximum bandwidthand SNR allowance are used for thetransmission of key tasks.
Ethernet Cables
02
CAT6A Modular ConnectorCAT6A Cable CAT6A Patch Cord
Ethernet Cables
Ethernet Cables
03
Ethernet Cables
D-Link CorporationNo. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan
Speci?cations are subject to change without notice.D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners.©2010 D-Link Corporation. All rights reserved.
Release 01 (May 2010)
CAT6A(Patch Cord) CAT6A(Solid Cord)
Conductor 24AWG,Multi-cores 23AWG,SolidConductor MetalColorJacket HardnessLength Type 1m/3m/5m/10m 305m+2mHeat ResistanceFlame Property
ConnectorContactsContacts BladeTemperature RangeDielectric WithstandingVoltageInsulation ResistanceDurabilityCable-to-Plug TensileStrengthUL Applications
Certifications UL Listed, ETL Verified,RoHS Compliant
√
ModularConnector/ Plug
RJ-45 8PGold plated: 30U”Phosphor Bronze
-10℃~80℃
500 V AC
60℃ min (temperature limited)VW-1 (UL); FT-1 (CSA)
CableSpecifications
Bare CopperBlue,Gray,Red,Yellow,White
55P (84A±3A, Shore)
35M ohm (max.)750 matching cycles
20 lbs (89N) (min.)
250 V AC, 2A (max.)
