CATEGORY 1 HITCHES - The CTD Group · CATEGORY 1 HITCHES CTD106M Base Hitch • Vertical mounting...

thectdgroup.com • [email protected] • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

CATEGORY 1 HITCHES

CTD106M Base Hitch• Vertical mounting hitch• Draft load 7,800 lbf pull on bottom tongue

CTD126VR Base Hitch• Vertical mounting hitch• Vertical load 1000 lbf• Draft load 29,000 lbf• Maximum drawpin size 1.5” for 40°of roll & pitch articulation

• Up to 64 HP

CTD12XL Base Hitch• Austempered hitch• Vertical mounting hitch• Vertical load 1,600 lbf• Draft load 45,000 lbf• Maximum drawpin size 1.5” for 40°of roll & pitch articulation

• Up to 64 HP

THE •••

CTD @ © GROUP MANUFACTURING INTEGRA CASTINGS MACHINE WORKS CONTRACTING


I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 2 HITCHES

CTD201VH Base Hitch• Vertical mounting hitch• Vertical load 4,000 lbf• Draft load 56,000 lbf• Maximum drawpin size 1.5” for40°of roll & pitch articulation

• Up to 154 HP• Also available with 3-sided heattreatment - CTD201V3

CTD201VH Perfect Hitch Option

Clevis Options• CTD206VR (Clevis - 1” drawpin size)• CTD207V (Clevis - 1.375” drawpin size)• CTD208VR (Clevis - 1.25” x 1.75” slotted

hole)• 15,000 lbf pull on bottom tongue• WB90 (Grade 8 Bolt)• WB91 (Nut)

• CTD202V (Top Plate)• CTD203VR (V-Block)• CTD205H (Neoprene

Cushions)• WB85 (Grade 5 Bolt)

208 Clevis

206 Clevis

THE .•,

CTD @ © @ t® GROUP

~ MANUFACTURING INTEGRA CASTINGS MACHINE WORKS CONTRACTING


I N T E G R A

C

A S T I N G

S


CATEGORY 3 HITCHES

CTD237VR Base Hitch• Vertical mounting hitch• Vertical load 4,700 lbf• Draft load 60,000 lbf• Maximum drawpin size 1.5” for 40°of roll & pitch articulation

• Up to 248 HP

CTD237VR Perfect Hitch Option

CTD237VR Clevis Options• CTD206VR (Clevis - 1” drawpin size)• CTD207V (Clevis - 1.375” drawpin size)• CTD208VR (Clevis - 1.25” x 1.75” slotted




208 Clevis206 Clevis

THE .•, •••

CTD ~ @@ t@ GROUP



I N T E G R A

C

A S T I N G

S


CATEGORY 3 HITCHES

CTD301VH & CTD301V3 Base Hitch• Vertical mounting hitch• Vertical load 5,000 lbf• Draft load 68,000 lbf• Maximum drawpin size 1.5” for 40°of roll & pitch articulation

• Up to 248 HP



208 Clevis

206 Clevis



CTD301VH & CTD301V3 Perfect Hitch Option

THE .•, •••

CTD ~ @@ t@ GROUP



I N T E G R A

C

A S T I N G

S


CATEGORY 3 HITCHES

CTD321CTD3 Base Hitch• Vertical mounting hitch• Vertical load 6,000 lbf• Draft load 70,000 lbf• Maximum drawpin size 1.5” for 40°of roll & pitch articulation

• Up to 248 HP

CTD331VH Base Hitch• Vertical mounting hitch• Vertical load 5,500 lbf• Draft load 70,000 lbf• Maximum drawpin size 1.5”for 40° of roll & pitch articulation

• Up to 248 HP

CTD331VH Perfect Hitch Option





208 Clevis

206 Clevis

GROUP ~

MANUFACTURING INTEGRA CASTINGS MACHINE WORKS CONTRACTING


I N T E G R A

C

A S T I N G

S


CATEGORY 3 HITCHES

CTD23XL Base Hitch• Austempered hitch• Vertical mounting hitch• Vertical load 7,000 lbs.• Draft load 85,000 lbs.• Maximum drawpin size 1.5”

for 40° of roll & pitch articulation• Up to 248 HP

Clevis Options


CTD23XL Perfect Hitch Option

• CTD206VR (Clevis - 1” drawpin size)• CTD207V (Clevis - 1.375” drawpin size)• CTD208VR (Clevis - 1.25” x 1.75” slotted




THE .•,

CTD ~ © GROUP



I N T E G R A

C

A S T I N G

S


CATEGORY 3 HITCHES

CTD30XL Base Hitch

Clevis Options







• Austempered hitch• Vertical mounting hitch• Vertical load 7,200 lbs.• Draft load 87,000 lbs.• Maximum drawpin size 1.5”

for 40° of roll & pitch articulation• Up to 248 HP

THE .•,

CTD @ © @ t® GROUP



I N T E G R A

C

A S T I N G

S


CATEGORY 3 HITCHES

CTD33XL Base Hitch


Clevis Options

208 Clevis

206 Clevis





• Austempered hitch• Vertical mounting hitch• Vertical load 8,000 lbf• Draft load 91,000 lbf• Maximum drawpin size 1.5”for 40° of roll & pitch articulation

• Up to 248 HP

~ ~

C.To@@ @ t® .a..~"--~ •---~-t G RQ Up MANUFACTURING INTEGRA CASTINGS MACHINE WORKS CONTRACTING ... . Q ~ ¥ • 11.:=,t a

~


I N T E G R A

C

A S T I N G

S


CATEGORY 4 HITCHES

CTD401V3 Base Hitch• Vertical mounting hitch• Vertical load 7,500 lbf• Draft load 106,000 lbf• Maximum drawpin size 2.0” for 40°of roll & pitch articulation

• Up to 402 HP

CTD401V3 Perfect Hitch Option

Clevis Options• Clevis on cat. 4 hitch for transport use only!• CTD206VR (Clevis - 1” drawpin size)• CTD207V (Clevis - 1.375” drawpin size)• CTD208VR (Clevis - 1.25” x 1.75” slotted hole)• 15,000 lbf pull on bottom tongue• WB82 (Grade 8 Bolt)• WB91 (Nut)



208 Clevis

206 Clevis

GROUP ~

MANUFACTURING INTEGRA CASTINGS MACHINE WORKS CONTRACTING


I N T E G R A

C

A S T I N G

S


CATEGORY 4 HITCHES

CTD40XL Base Hitch


Clevis Options

CTD421V3 Base Hitch• Vertical mounting hitch• Vertical load 8,000 lbf• Draft load 106,000 lbf• Maximum drawpin size 2.0” for

40° of roll & pitch articulation• Up to 402 HP

• Clevis on Category 4 hitchfor transport use only!





• Austempered hitch• Vertical mounting hitch• Vertical load 9,000 lbf• Draft load 110,000 lbf• Maximum drawpin size 2.0” for 40°of roll & pitch articulation

• Up to 402 HP

208 Clevis

206 Clevis

THE .•, . •••

CTD ~ @@ t@ GROUP



I N T E G R A

C

A S T I N G

S


CATEGORY 4 HITCHES

CTD42XL Base Hitch

CTD41RO Base Hitch

• Austempered hitch• Vertical mounting hitch• Vertical load 9,500 lbf• Draft load 112,000 lbf• Maximum drawpin size 2.0” for 30°of roll & pitch articulation

• Up to 402 HP

• Vertical mounting hitch• Vertical load 9,000 lbf• Draft load 110,000 lbf• Maximum drawpin size 2.0” for 40°of roll & pitch articulation

• Up to 402 HP

THE .•, . •••

CTD ~ @@ t@ GROUP



I N T E G R A

C

A S T I N G

S


CATEGORY 5 HITCHES

CTD52XL Base Hitch

CTD52XLA Perfect Hitch Option

CTD53XL Base Hitch

CTD53XLA Perfect Hitch Option

• Austempered hitch• Vertical mounting hitch• Vertical load 14,000 lbf• Draft load 155,000 lbf• Maximum drawpin size 2.75” for30° of roll & pitch articulation

• Up to 670 HP

• Austempered hitch• Vertical mounting hitch• Vertical load 12,000 lbf• Draft load 130,000 lbf• Maximum drawpin size 2.75” for30° of roll & pitch articulation

• Up to 670 HP

• AP5XLP - Adjustment Plate (.500” thk - plated)• FA227 - Carriage Bolt (.750-10UNC x 4.5” lg)• PMI-136 - Compression Spring (1.05” OD x .125” wire)• WA65 - Washer (.812” ID x 1.5” OD x .125” thk)• WB91 - Lock Nut (.750-10UNC Steel hex Grade 8)

• AP4-5P - Adjustment Plate (.375” thk - plated)• FA228 - Carriage Bolt (.625-11UNC x 4” lg)• PMI-136 - Compression Spring (1.05” OD x .125” wire)• WA28 - Washer (1.312” OD x .625” ID x .093” thk)• WB131 - Lock Nut (.625-11UNC Steel hex Grade 5 - plated)

THE .•, . •••

CTD ~ @@ t@ GROUP


HITCH BRACKETS

1.62.25

TYP.R.25

.751.50

5.00

TYP.

17/32" - 0"+1/16"

1.00TYP.1.50 1.00

8.00 2.00

1.00 2.13

(TYP).656+

-.063.000

TYP .25 2.87

R.25(TYP)

1.19 2.37

.75 1.50(TYP)

6.00 .781+-.063.000

(TYP) .38 4.06

R.38(TYP)

-

(TYP).000

1.25

(TYP) .75

.063

2.63

.813+1.50

6.00

.50 4.06

R.50(TYP)

4.06 .375

R.38 (TYP)

9.00

1.19

(TYP)(TYP).000 .75 1.50 .781+

-.063

2.38

.50 4.06

R.63(TYP)

1.71 3.43

1.88 2.25(TYP)

6.00

1.030+-.060.000

1.71

10.00

.060

(TYP).000 1.62 -

(TYP)1.030+ 2.25

3.43

.50 4.06

R.63(TYP)

1.03

12.00

1.50 TYP.

.060+

.000-

3.431.71

2.25TYP.4.06.50

R.63TYP.

4.06.50

R.63TYP.

1.713.43

1.03

12.00

1.50- .000+.060

TYP.3.00TYP.

3

.63 4.06

R.63TYP.

.000

.060

3.50

+

1.63

1.03-

1.88

6.00

2.25±.030

HB106 - FITS CTD106M HB126 - FITS CTD126 & CTD12XL

HB237 - FITS CTD237 HB237H - FITS CTD23XL

HB237-6 / HB237-8 - FITS CTD237 HB302 - FITS CTD201, 301, 321, 401, 421

HB304 - FITS CTD201, 301, 321, 401, 421 HB305 - FITS CTD201, 301, 321, 401, 421

HB331 - FITS CTD331 HB402 - FITS CTD42XL

e


I N T E G R A

C

A S T I N G

S


WELD-ON IMPLEMENT HITCH BRACKETSVarious sizes allow for easy adaptation of the 3-in-1 Implement Hitch.

Always maintain proper PTO dimensions when replacing your implement hitches. It is the responsibility of the Implement Manufacturer / Engineer to determine if the Weld-On Bracket / 3-in-1 Implement Hitch is adequate for the implement application.

IMPORTANT

WARRANTY

The vertical loads and draft loads of hitches and clevises in this catalogue are maximum ultimate strength ratings only.

High vertical loads may require additional induction hardening if affected areas are not hardened already.

Excessive vertical loads which exceed proposed ISO 6489-3 Tractor Drawbar standards will result in excessive wear to hitch or drawbar. Please consult with our sales personnel.

When mounting hitches, always use full shank of the bolt through brackets to maximize the bolt strength.

Warranty for all applications is VOID if usages are outside ASAE standards.

CANADIAN TOOL & DIE LTD. warrants its products to be free from defects in workmanship and material for a period of one year from the date of purchase.

CANADIAN TOOL & DIE LTD. will not be held responsible for any failure of these products due to misuse or abuse (ie. overloading) or incorrect installation.

CANADIAN TOOL & DIE LTD.’s responsibility on all goods purchased is limited to replacement of defective parts only and excludes any compensations for cost of transportation, installation, removal or repairs as well as any contingent or resulting loss or damage that may have occured as a result of defects in workmanship and material.

AFTER AUTHORIZATION FROM CANADIAN TOOL & DIE LTD., such parts are to be returned prepaid to CANADIAN TOOL & DIE LTD., Winnipeg, MB, Canada for inspection. Parts found to be defective will be replaced at no charge, FOB our plant, or full credit will be allowed at our option.

THE .•, . •••

CTD ~ @@ t@ GROUP


CATEGORY 1 HITCHES - The CTD Group · CATEGORY 1 HITCHES CTD106M Base Hitch • Vertical mounting...

Documents

Transcript of CATEGORY 1 HITCHES - The CTD Group · CATEGORY 1 HITCHES CTD106M Base Hitch • Vertical mounting...