CATALOUGE SERIAL NO: TSL/AHB/DECEMBER/169/17-18 · Web view2019/11/14 · 31, Chowringhee Road,...

CATALOGUE SERIAL NO: FCP/AHB/NOVEMBER/001/19-20November 07, 2019

Rank Based Sealed Bid Tender conducted by A H Bilimoria & Co.Tender of Misc Items, Kharagpur

BEING SOLD ON ‘’AS IS WHERE IS AND NO COMPLAINT BASIS’’Catalogue Serial Number: FCP/AHB/NOVEMBER/001/19-20Seller: Fogla CorpRank Based Sealed Bid Tender website:

www.ahbilimoria.com

Rank Based Sealed Bid Tender Date & Time: 14th November, 2019…..….. Starting at 02:30 PM

Inspection Date & Time:11th November, 2019: At 10.30 AM---------------- For inspection of materials the interested customers should report at Bhagirathi Packaging Pvt Ltd., JL-86, Salua Road, Diwanmaro Ayma, PO Hariatara, Kalaikunda, P.S.- Kharagpur ,West Bengal -721304 BY 10.00 A.M.

Date of Security Money Deposit 14th November, 2019 Till ……… 02.:00 PMContact Details:

For Rank Based Sealed Bid Tender @ A H Bilimoria & CompanyArea Contact No. Email Id

Rank Based Sealed Bid Tender Room

033-22294833, 22296577

Lot Confirmation Related

033-22294833, 22296577 [email protected], [email protected]

Payment Related 033-22294833, 22296577 [email protected], [email protected], [email protected], [email protected], [email protected], [email protected]

For time bound resolution of unresolved issues log into our Customer Complaint Management portal

Type in www.ahbilimoria.com> Go to “Customer Complaint Management Portal” > Log in with your user id and password and write the details of issue.

For Any unresolved Issues beyond two (02) days mail to A H Bilimoria & Company :Mr. A K Sil (M-09830074122) & Mr. D Pyne (M-09830738481), E-mail: [email protected], [email protected]

Copy to Fogla Corp : Rishabh Ranjan ([email protected])

SPECIAL NOTE: - It is the responsibility of the buyer to furnish the valid GST no. & necessary documents to A H Bilimoria & Company before participating in the Rank Based Sealed Bid Tender . In case during the transactions, it is found that valid GST no. has not been provided, then all

of 24

mailto:[email protected]

http://www.ahbilimoria.com/


mailto:[email protected],%[email protected]





necessary liabilities if any & so accrued would be on account of the buyer. Fogla Corp. & A H Bilimoria & Company would not be responsible for any such liabilities.

Note: Fogla Corp. reserves the right to track IP address, MAC number and geolocation of bidding customers whenever customers participate in any Rank Based Sealed Bid Tender on the A H Bilimoria & Co. Rank Based Sealed Bid Tender platform for Fogla Corp.

A. Payment and Lifting Schedule:

Lot No.

Payment ScheduleLifting Schedule

(working days from the next day of DO release)EMD Balance Payment

For all lots02 Working days from Date of

Lot Confirmation 03 Working Days From Date of EMD 10 working days from date of DO

1. Suitable extension of due date for payment and lifting will be accorded in case of any eventualities like Strike/ Bandh/ Special restriction on vehicular movement imposed by the local Administration etc.

2. Requirements of participation:2.1 Registration: Before participation in the Rank Based Sealed Bid Tender, a prospective bidder shall be required to get registered with A H Bilimoria & Co. For details visit

www.ahbilimoria.com

2.2 Security Deposit: Non-Interest bearing security deposit of Rs. 50,000/- (Rupees Fifty Thousand only) in favour of “A H Bilimoria & Co.” through Online Payment only : Details as under :

Beneficiary Name

A. H. BILIMORIA & COMPANY

Bank Name HDFC BankBranch Name 31, Chowringhee Road, Kolkata – 700016Account No 6932560001205IFSC Code HDFC0000693

3. Inspection Rules & Policy:

of 24



All parties to send their request for registration of inspection through registered e-mail to [email protected], [email protected], [email protected], [email protected] one day prior to the date of inspection.

(Mail request should contain – Person Name, ID Proof, Firm Name, Mobile No., Name of the Rank Based Sealed Bid Tender & Letter of

authorization for inspection)

Visitor GP of only those customers would be approved, who have sent their request via mail to A H Bilimoria &Co, one day prior to

inspection. All interested parties should reach at Bhagirathi Packaging Pvt Ltd., JL-86, Salua Road, Diwanmaro Ayma, PO Hariatara, Kalaikunda, P.S.- Kharagpur by 10:00 AM

(or as announced) on the date of inspection. Only registered customers/bidders/representatives of firms shall be allowed for inspection of material, subject to fulfilling their safety requirement of the steel works.

Taking photographs of the material is strictly prohibited.

Customers are advised to ensure that they inspect the materials on offer on the scheduled date as mentioned in the catalogue, before Participating in the Rank Based Sealed Bid Tender . It is reiterated that all materials are offer / sold by Fogla Corp. on “AS-IS-WHERE-IS” and “NO-COMPLAINTS” basis, and no complaint what so ever shall be entertained regarding the quality of materials after the sale.

“Fogla Corp. would not accept any claim from any customer for non-inspection of materials.”

Interested bidders have to come with safety shoes, safety fluorescent jackets, and safety goggles & safety helmets at the time of inspection. All interested parties have to arrange for their own safety shoes, safety jackets, safety helmets and safety goggles as per Fogla Corp. standards. No person will be allowed to enter the works without these. Compliance to Fogla Corp. safety norms is a must. No complaints during lifting, in what-so-ever manner, will be entertained if customers fail to inspect the materials during scheduled inspection dates. No ''people movement'' shall be allowed at the loading point during loading/delivery of materials from the yards. Fogla Corp. will not be responsible for any delays arising out of non-compliance to Fogla Corp. norms.

4. Bidding modalities: 4.1 Price Bid Basis: In Indian rupees as per unit of measurement as given in Material List. Price to be quoted is basic, ex- location exclusive of taxes and any other statutory

levies.4.2 Type of Tender: Rank Based Sealed Bid Tender 4.3 Bid Validity: Bid shall be valid for 10 (Ten working days excluding Saturdays, Sundays and Bank holidays) working days counted from the next day of Rank Based Sealed Bid

Tender process in case of Rank Based Sealed Bid Tender against a catalogue which is completed on the same day. And if it is continuing on any other day the counting of days for lot confirmation shall be from the next day of completion of entire Rank Based Sealed Bid Tender process.

5. Taxes & duties:5.1 GST : As applicable5.2 TCS : As applicable. In case of availing of concessional rate of TCS proper certificate issued by appropriate Income Tax

authority are to be issued in favour of the Principal Company along with payment. Self certification of Form no 27C is not acceptable.

5.3 Any change in taxes applicable at the time of lifting shall be applicable.

of 24




6. Payment terms & conditions : 6.1 Payments: PAYMENT FACILITY BY RTGS / NEFT ONLY

Beneficiary Name

Bhagirathi Packaging Pvt. Ltd.

Bank Name HDFC BANK LTD.Branch Name Stephen House Branch, KolkataAccount No 00080330002205IFSC Code HDFC0000008

6.2 EMD: 10% of the material value to be paid within 02 (Two) working days from the date of lot confirmation. EMD to be adjusted in the final installment only. EMD payment is to be made within the time limit as given in letter of confirmation. No extension will be provided for the same.

6.3 Balance Payment Time: (As per payment schedule)6.4 Delayed Payment Charges (DPC) : Installment payments with DPC @ five (05) paise per Rs. 100 per day will be accepted up to 4 (Four) working days from due date of

installment payment as mentioned in the confirmation letter. This is not applicable for EMD payment.6.5 Saturdays (only Bank Holidays) & Sundays are excluded for counting purpose for payment schedule.6.6 In the event of Non-Receipt of Payment within the stipulated period of Payment, the Sale Offer for the approved Lot shall stand withdrawn automatically (Refer Clause#8).6.7 Buyers have to send the payment deposit slip (UTR No /Scan Copy of NEFT/RTGS Transaction Slip) against Lot No. immediately after the payment to AHB at email id:

[email protected] & [email protected]

7. Lifting terms & conditions:7.1 DOs will be handed over to authorized representatives of bidders on receipt of payment. Authorization letter to be issued via registered e-mail id’s. Authorized letter must be duly stamped and signed by the proprietor or partner or director on receipt of payment. Lifting date is calculated from the next day of DO Release date. 7.2 Loading Charges: As mentioned in material list7.3 Loading shall be given strictly as per the statutory norms & safety norms of Fogla Corp.7.4 Lifting with Ground Rent: Lifting along with ground rent will be allowed up to 4 (four) working days from the last date of lifting period. In case the lifting is not complete, and no

request is made by the customer within the period of four days, the company reserves the right to close the lot, and refund the balance to the party after deducting for any shortfall in lifting as per norms laid down in the catalogue. Ground Rent will be calculated on balance unlifted quantity @ 05 paise (inclusive of tax) per Rs.100/- per day

7.5 Additional lifting days for advance payment of installment - If the installment payment is made in advance, then additional lifting days (equivalent to the number of days payment made in advance) would be given. This would not be applicable for EMD payment.

7.6 PICK & CHOOSE NOT ALLOWED FOR ANY OF THE LOTS.7.7 LOT TRANSFER WILL NOT BE ALLOWED.7.8 USE OF HYDRA CRANES BY CUSTOMERS IN ANY PREMISES/LOCATION /STOCKYARDS OF FOGLA CORP. AND ITS VENDORS/CONSIGNMENT AGENTS' PREMISES IS BANNED.

8. Penalty:8.1 The following penalties shall be applicable in the eventuality of a buyer defaulting in making the payment of EMD (wherever applicable) or any installment/s, as per the

stipulated schedule for each lot, in a financial year: In the first instance, a penalty of Rs. 50,000/- (Rupees Fifty Thousand only) shall be recovered from the customer. In the second instance, a penalty of Rs.100,000/- (Rupees One Lakh only) shall be recovered from the customer.

of 24



In the third, and any subsequent instance, a penalty of Rs.150,000/- (Rupees One Lakh Fifty thousand only) shall be recovered and the customer shall be debarred from participating in any Rank Based Sealed Bid Tender for a period of three months from the date of debarment.

In the event of any default, the customer’s user id will be disabled and the customer will be blocked from participating in any Rank Based Sealed Bid Tender of Fogla Corp. with immediate effect.

The defaulting customer shall be allowed 06 (six) working days to deposit the penalty as mentioned above. In case the penalty is not received within the stipulated period, the customer’s security deposit shall be forfeited, and the defaulting customer shall be immediately debarred from participating in any Rank Based Sealed Bid Tender of Fogla Corp.

8.2 If after making payment of EMD (wherever applicable), the installment payment/s are not made by the customer as per the stipulated schedule for each lot, the entire EMD amount against such lot shall be forfeited.

8.3 In case of non- lifting of full lot quantity after making full payment, a penalty equivalent to 20% of the material value for the un-lifted quantity against each lot shall be recovered from the customer.

9. Lot Closure Norms :For Lot Closure, the tolerance would be ± 10% of the original quantity.For High Value Items (>/= Rs 50000 per MT) tolerance for Lot closure is 0% of the lot quantity.

10. Refund : Refunds will only be made by Fogla Corp. vide RTGS/NEFT and hence all customers are required to submit their bank details to A H Bilimoria & Company or mail at [email protected], [email protected], [email protected], [email protected]. Fogla Corp. or A H Bilimoria & Company will not be responsible for any delay in refunds owing to absence of bank details of the customer.

11. Complaints :Complaints, if any, with regard to any transaction shall have to be lodged by the buyer within three calendar months from the date of last invoice. No complaint shall be entertained thereafter, under any circumstances. Customers can log their complaints at (www.ahbilimoria.com> Go to “Customer Complaint Management Portal” > Log in with your user id and password and write the details of issue.)

12. Jurisdiction :Any dispute arising out of any contract shall be decided in West Bengal by the courts in Jamshedpur and by no other courts. The courts in Jamshedpur shall have exclusive jurisdiction to adjudicate upon any such dispute.

13. General terms & conditions:13.1 Any dispute on quality & quantity of material and bid cancellation shall not be entertained at any point after the Rank Based Sealed Bid Tender .

13.2 All lots are offered/sold on “As is Where is Basis” and “No Complaint Basis”.

13.3 Lot transfer will not be allowed. Payment and invoicing has to done in the name of the H1 bidder, subject to the prices being approved.

13.4 Lot purchased should consist of material from the same lot and designated location only. Fogla Corp. has the right to check any vehicle at any moment of time. If material lifted differs from the material that is purchased by the buyer, then the buyer and authorized representative will be permanently debarred. Also Fogla Corp. can take any

of 24





penal action against the buyer/authorized representative. All the material loaded in the vehicle is to be covered in order to follow the safety compliance of Fogla Corp. works.

13.5 If the safety compliance is not followed, then Fogla Corp. can penalize the buyer / authorized representative as deemed fit.13.6 Customer attested photocopy of valid id proof (Voter id/Aadhar/Pan card) of all lifters / Authorized persons engaged by customers for lifting of materials from

Fogla Corp. is to be enclosed with the authorization letters & to be forwarded to Fogla Corp. for issue of gate pass.13.7 Dispatch is subjected to FORCE MAJEURE conditions 13.8 The seller reserves the right to terminate any offer at any point of time without assigning any reasons13.9 In the event of termination of the offer, seller shall refund the balance amount after due reconciliation13.10 No claims whatsoever would be entertained after cancellation of the bid13.11 In addition of earlier safety norms, the following would be compulsory:

The drivers of the vehicle must have the eye test certificate. The frequency of the testing would be as below: 1. If the age of the person is less than 45 years - Once in a year 2. If the age of the person is 45 years or more, the testing is required to be done once in every 6 months

Please ensure to comply with the safety norms

14. Compliance to safety norms14.1 Authorized persons (of the customer) involved in lifting of the materials will be allowed only with Personal Protective Equipment’s (PPE) i.e., Safety Shoes, Safety Helmet,

Safety Goggles, Fluorescent Jacket and Hand Gloves. No "people movement" shall be allowed at the time of loading/delivery of materials from the yards" Tata Steel will not be responsible for any delays arising out of Non- Compliance to the Safety Norms.

15. DISCLAIMER FOR RANK BASED SEALED BID TENDER BANDWIDTH PROBLEMS, CONNECTIVITY PROBLEMS WITH THE LOCAL ISP (INTERNET SERVICE PROVIDER), SLOWNESS TO ACCESS PAGES FOR DOWNLOADING ETC. ARE BEYOND THE CONTROL OF FOGLA CORP. AND A H BILIMORIA & COMPANY. HENCE NO RESPONSIBILITY LIES WITH FOGLA CORP. OR A H BILIMORIA & COMPANY FOR THE ABOVE PROBLEMS FACED, IF ANY, BY THE BIDDERS BEFORE/DURING THE RANK BASED SEALED BID TENDER ANY. BID PLACED USING THE BIDDER'S USERNAME AND PASSWORD IS UNCONDITIONALLY BINDING ON THE BIDDER TO WHOM SUCH USERNAME AND PASSWORD HAD BEEN ALLOTTED AND HE SHALL BE SOLELY RESPONSIBLE FOR MAINTAINING THE CONFIDENTIALITY OF THE SAME AND FULLY RESPONSIBLE FOR ALL ACTIVITIES THAT OCCUR UNDER THEIR USERNAME AND PASSWORD. HENCE THE USER IS ADVISED TO CHECK THE USERNAME AND PASSWORD BEFORE THE RANK BASED SEALED BID TENDER , IN ORDER TO FAMILIARISE HIMSELF WITH THE SAME AND IS ADVISED NOT TO REVEAL IT TO ANYONE ELSE SO AS TO PREVENT MISUSE OF THE SAME. THE BIDS MADE BY THE BIDDERS AGAINST THEIR USERNAME AND PASSWORD SHALL BE IRREVOCABLE.THE BIDDERS ARE ADVISED TO REGISTER AND PRE-QUALIFY FOR BIDDING WELL IN ADVANCE AND PLACE THEIR BIDS EARLY IN ORDER TO TAKE CARE OF ANY UNFORESEEN TECHNICAL DIFFICULTY THAT MIGHT SURFACE IN THE INTERNET OPERATIONS.

Lot Photograph: Photographs of lots are at best indicative only and do not necessarily reflect the actual condition of lots. All bidders are advised to physically inspect the offered lots before participating in the Rank Based Sealed Bid Tender s. Fogla Corp. or A H Bilimoria & Co. shall not be responsible or liable for any error of judgment or bids put by bidders acting on the basis of these photographs.

Quantity offered is based on eye estimation. Delivery will be made for the estimated quantity or actual ground stock. Estimation error may arise. After inspection, no complaint of whatsoever nature on estimated /offered quantity shall be entertained under any circumstances. Bidders are advised to make their own judgment on offered quantity before bidding.

of 24


MATERIAL DETAILS: AS PER ANNEXURE :

List of materials

Sl. No. Location Lot No.

Tender Timing Material description Qty UOM GST TCS Loading

LIFTING

PERIOD

Contact person Contact no

1

Bhagirathi Packaging Pvt Ltd., JL-86, Salua

Road, Diwanmaro Ayma, PO Hariatara,

Kalaikunda, P.S.-

FCP-191101

2:30-3:00

Rej. Pump Motors in as is where is condition, As per annexture-1

1 Lot 18% 1% Self

10 Working

Days from the D/O date

Mr. Dilip Muduli/

Mr. Rishab Ranjan

7603029504/9831173126

2

Bhagirathi Packaging Pvt Ltd., JL-86, Salua

Road, Diwanmaro Ayma, PO Hariatara,

Kalaikunda, P.S.-

FCP-191102

2:30-3:05

Rej. Misc Items in as is where is basis, As per annexture-2

1 Lot 18% 1% Self

10 Working

Days from the D/O date

Mr. Dilip Muduli/

Mr. Rishab Ranjan

7603029504/9831173126

Annexture-1 (Lot No. FCP-191101)

Sr. No. Item Description

Qty

Unit LOCATION

1 PUMP MOTOR 2.2KW, 415V, 4.7A 1 PCSKHARAGPUR



4 MOTOR 2.2 KW, 415V, 5.1A 1 PCSKHARAGPUR

5 MOTOR 1.12 KW, 415V, 3.2A 3 PCS KHARAGPU

of 24


R

6 MOTOR 2.2 KW, 415V, 4.2A 4 PCSKHARAGPUR

7 MOTOR 0.35HP, 0.6A, 415V 4 PCSKHARAGPUR

8 MOTOR 0.25KW, 415V, 0.8A 2 PCSKHARAGPUR


10 DC MOTOR 0.5KW, 220V, 2.9A 1 PCSKHARAGPUR

11 MOTOR 0.75KW, 415V 1 PCSKHARAGPUR

12 MOTOR 0.75KW, 415V, 1.5V 1 PCSKHARAGPUR



15 MOTOR 3KW, 415V, 6.15A 2 PCSKHARAGPUR

16 MOTOR 5.5KW, 415V, 11A 1 PCSKHARAGPUR

17 MOTOR 1.5KW 415V, 6A 1 PCSKHARAGPUR

18 MOTOR 1.5KW, 415V 1 PCSKHARAGPUR

Annexture-2 (Lot No. FCP-191102)

Sr. No. Item Description (NON MOVING MATERIALS) Qty Unit LOCATION

1 Hot Plate 1 No KHARAGPUR2 LENO LOOMS GATE RING(REED) WITH SOME SPARES 4 Nos KHARAGPUR3 SCREW & BARREL 1 Each KHARAGPUR

of 24


4 Hoist Parts of OVER HEAD CRANE 1 No KHARAGPUR5 AC DRIVE LOOM 1 PCS KHARAGPUR6 PS 20 CARD 2 PCS KHARAGPUR7 LS 20 CARD 2 PCS KHARAGPUR8 FERRULES NUMERIC 10 PCS KHARAGPUR9 FERRULES ALPHABETIC 30 PCS KHARAGPUR

10 THERMOCOUPLE HOLDER 20 PCS KHARAGPUR11 PVC SLEEVE 3MM 1 ROLL KHARAGPUR12 CONNECTOR 12 POINTS 4 PCS KHARAGPUR13 METAL CLAD PROTECTED AS20-TP 3 PCS KHARAGPUR14 BACKELIGHT CONNECTOR 2.5MM, 690V, TYPEUK2.5B 20 PCS KHARAGPUR15 BACKELIGHT CONNECTOR JCST 2.5, 750V 13 PCS KHARAGPUR16 BACKELIGHT CONNECTOR JCST 16, 750V 1 PCS KHARAGPUR17 REGULATOR RW3, 10K 4 PCS KHARAGPUR18 REGULATOR RW1, 500K 2 PCS KHARAGPUR19 REGULATOR RW1, 1K 1 PCS KHARAGPUR20 SWITCH ON/OFF 6A, 250V 1 PCS KHARAGPUR21 SWITCH ON/OFF 6A/80A, 250V 1 PCS KHARAGPUR22 KNOB REGULATOR 5 PCS KHARAGPUR23 LAMP TORCH LIGHT 5 PCS KHARAGPUR24 LAMP 130V, 0.02A 3 PCS KHARAGPUR25 OIL SEAL 65X45X10 6 PCS KHARAGPUR26 OIL SEAL 110X70X10 4 PCS KHARAGPUR27 SENSOR MB80-12GM50-E2, PART-805349 1 PCS KHARAGPUR28 SENSOR MB80-12GM50-E0, PART-805347 8 PCS KHARAGPUR29 RATIO / SPEED INDICATOR 3 PCS KHARAGPUR30 SWITCH BOARD 1 PCS KHARAGPUR31 HOLDER- PUSH BOTTOM ELEMENTS 40 PCS KHARAGPUR32 CABLE GLAND 70MM CBW012 16 PCS KHARAGPUR33 CABLE GLAND 40MM 2 PCS KHARAGPUR34 CABLE GLAND 30 MM 2 PCS KHARAGPUR35 CABLE GLAND 20 MM 17 PCS KHARAGPUR36 CABLE GLAND 15 MM 11 PCS KHARAGPUR37 CABLE GLAND 38 MM 2 PCS KHARAGPUR

of 24


38 CABLE GLAND 32 MM 5 PCS KHARAGPUR39 CABLE GLAND 19 MM 10 PCS KHARAGPUR40 CABLE GLAND 25 MM 5 PCS KHARAGPUR41 LUGS 400 ALU 7 PCS KHARAGPUR42 LUGS 300 ALU 5 PCS KHARAGPUR43 LUGS 185 ALU 8 PCS KHARAGPUR44 LUGS 150 ALU 4 PCS KHARAGPUR45 LUGS 240 ALU 2 PCS KHARAGPUR46 LUGS 85 ALU 1 PCS KHARAGPUR47 LUGS 50 ALU 4 PCS KHARAGPUR48 LUGS 300 COPPER 5 PCS KHARAGPUR49 LUGS 240 COPPER 2 PCS KHARAGPUR50 LUGS 150 COPPER 1 PCS KHARAGPUR51 DISTRIBUTION BOX 4 WAY, TPN, BH304SD13 1 PCS KHARAGPUR52 DISTRIBUTION BOX 6 WAY, TPN, BH306SD13 2 PCS KHARAGPUR53 DISTRIBUTION BOX 4 WAY, TPN, DSDMTNHCS104 1 PCS KHARAGPUR54 DISTRIBUTION BOX 4 WAY, SPN, DMSN0S04 1 PCS KHARAGPUR55 DISTRIBUTION BOX 6 WAY, BHE00DP 1 PCS KHARAGPUR56 BOARD WOODEN 8X12 2 PCS KHARAGPUR57 BOARD WOODEN 8X10 3 PCS KHARAGPUR58 BOARD GI 4X6 2 PCS KHARAGPUR59 BOARD GI 4X8 3 PCS KHARAGPUR60 BOARD GI 4X10 2 PCS KHARAGPUR61 BOARD GI 3X8 2 PCS KHARAGPUR62 BOARD GI 3X6 2 PCS KHARAGPUR63 BOARD GI 4X4 1 PCS KHARAGPUR64 BOARD GI 3X3 1 PCS KHARAGPUR65 BOARD GI 4X3 1 PCS KHARAGPUR66 HANDLE FOR CHANGE OVER SWITCH 1 PCS KHARAGPUR67 WEIGH MACHINE 300 GM 1 PCS KHARAGPUR68 WEIGH MACHINE 50 GM 1 PCS KHARAGPUR69 WEIGH MACHINE 5000 GM 1 PCS KHARAGPUR70 CARBON B6 32X12.5X40 5 PCS KHARAGPUR71 CARBON 32X13X50 3 PCS KHARAGPUR

of 24


72 CARBON 16X6X32 1 PCS KHARAGPUR73 CORD (+/-) FOR MULTIMETER 1 SET KHARAGPUR74 FILTER KU2.505.02.0.00 (INNER+OUTER) 2 PCS KHARAGPUR75 FILTER KVO.505.03.00 2 PCS KHARAGPUR76 FILTER KVO.505.02.0.00 2 PCS KHARAGPUR77 FILTER 1457 431 003 -8F8 2 PCS KHARAGPUR78 FILTER 4811705000 1 PCS KHARAGPUR79 FILTER 03.040.19.0.00 2 PCS KHARAGPUR80 AUTOMATIC VOLTAGE REGULATOR TAVR-3A 1 PCS KHARAGPUR81 OIL FILTER TUBE 1 PCS KHARAGPUR82 SHOVEL HANDLE 3 PCS KHARAGPUR83 PAINT YELLOW 8 LTR KHARAGPUR84 PAINT GRAY 1 LTR KHARAGPUR85 BLACK BITUMIN PAINT 4 LTR KHARAGPUR86 RED OXIDE PRIMER 5 LTR KHARAGPUR87 PAINT BRUSH 75MM 1 PCS KHARAGPUR88 PAINT OIL 8 LTR KHARAGPUR89 GLASS FILM 1 PKT KHARAGPUR90 REXINE 1 PCS KHARAGPUR91 PVC BUSH FOR AIR VENTILATION 63 PCS KHARAGPUR92 O RING FOR AIR VENTILATION 32 PCS KHARAGPUR93 RUBBER BUSH FOR AIR VENTILATION 59 PCS KHARAGPUR94 GOUNTING BOLT 8MMX100MM 7 PCS KHARAGPUR95 GOUNTING BOLT 10MMX200MM 43 PCS KHARAGPUR96 GOUNTING BOLT 12MMX100MM 80 PCS KHARAGPUR97 PIPE CLAMP 9 PCS KHARAGPUR98 U-TYPE HOOK 4.5" 20 PCS KHARAGPUR99 U-TYPE HOOK 3.5" 8 PCS KHARAGPUR

100 U-TYPE HOOK 3" 1 PCS KHARAGPUR101 J- TYPE HOOK SMALL 167 PCS KHARAGPUR102 J- TYPE HOOK 4" 140 PCS KHARAGPUR103 J- TYPE HOOK 3" 32 PCS KHARAGPUR104 PIPE FIX CLAMP 3" 22 PCS KHARAGPUR105 PIPE FIX CLAMP 2.5" 22 PCS KHARAGPUR

of 24


106 PIPE FIX CLAMP 0.5" 45 PCS KHARAGPUR107 PIPE FIX CLAMP 1.5" 14 PCS KHARAGPUR108 PIPE FIX CLAMP 1" 109 PCS KHARAGPUR109 WINDOW BREAKER 68 PCS KHARAGPUR110 DOOR/WINDOW FRAME LOCK 56 PCS KHARAGPUR111 DOOR/WINDOW LOCK 82 PCS KHARAGPUR112 L- CLAMP 42 PCS KHARAGPUR113 PULLEY 2 GROOVE 12" & 5" 1 PCS KHARAGPUR114 PULLEY 3 GROOVE 10" 1 PCS KHARAGPUR115 PULLEY 1 GROOVE 8" 1 PCS KHARAGPUR116 PULLEY 1 GROOVE 10" 1 PCS KHARAGPUR117 PULLEY 1 GROOVE 9" 1 PCS KHARAGPUR118 PULLEY 2 GROOVE 7" 4 PCS KHARAGPUR119 PULLEY 2 GROOVE 5.5" 2 PCS KHARAGPUR120 PULLEY 2 GROOVE 4.5" 1 PCS KHARAGPUR121 PULLEY 2 GROOVE 4" 4 PCS KHARAGPUR122 PULLEY 1 GROOVE 2.5" 1 PCS KHARAGPUR123 PULLEY 2 GROOVE 3" 1 PCS KHARAGPUR124 PULLEY 2 GROOVE 4" 1 PCS KHARAGPUR125 LEAD SEAL 5 KGS KHARAGPUR126 WIRE LEAD SEAL 2 ROLL KHARAGPUR127 HEATER STAND (PIPE CUTTING) 1 SET KHARAGPUR128 LENGTH COUNTER METER, KAYEE 4 PCS KHARAGPUR129 PVC TEE 6" 12 PCS KHARAGPUR130 PVC ELBOW 6" 2 PCS KHARAGPUR131 PVC 4 WAY 6" 1 PCS KHARAGPUR132 PVC JOINT 6" 5 IN 1 1 PCS KHARAGPUR133 PVC JOINT 6" 4 PCS KHARAGPUR134 PVC BEND 6" 6 PCS KHARAGPUR135 TP WASTE WATER EXTENTOIN PIPE (OLD) 4 PCS KHARAGPUR136 PVC FLEXIBLE PIPE 40MM 2 PCS KHARAGPUR137 GI REDUCER 3" 2 PCS KHARAGPUR138 GI NIPPLE 3"X6" 2 PCS KHARAGPUR139 GI TEE 3"X1" 2 PCS KHARAGPUR

of 24


140 GI PLUG 3" 2 PCS KHARAGPUR141 GI ELBOW 3" 6 PCS KHARAGPUR142 GI SOCKET 3" 14 PCS KHARAGPUR143 GI SQUARE FLANGE 2 PCS KHARAGPUR144 GI ELBOW 3"X1.5" 1 PCS KHARAGPUR145 GI ELBOW 2.5" 5 PCS KHARAGPUR146 GI TEE 2.5" 1 PCS KHARAGPUR147 GI SOCKET 2.5" 16 PCS KHARAGPUR148 GI TEE 2.5"X2" 1 PCS KHARAGPUR149 GI TEE 2.5"X1.5" 1 PCS KHARAGPUR150 GI TEE 2.5" X 1.1/4" 6 PCS KHARAGPUR151 GI REDUCER 2.5" X 1.5" 4 PCS KHARAGPUR152 GI REDUCER 2.5"X2" 1 PCS KHARAGPUR153 GI PLUG 2.5" 5 PCS KHARAGPUR154 GI ELBOW 2.5"X1.5" 4 PCS KHARAGPUR155 GI REDUCER 2" 4 PCS KHARAGPUR156 GI TEE 2" 1 PCS KHARAGPUR157 GI TEE 2"X1" 1 PCS KHARAGPUR158 GI ELBOW 2" 1 PCS KHARAGPUR159 GI PLUG 2" 2 PCS KHARAGPUR160 GI SOCKET 2" 3 PCS KHARAGPUR161 GI ELBOW 2"X1" 1 PCS KHARAGPUR162 GI JOINT 1.5" 1 PCS KHARAGPUR163 GI REDUCER 1.5" 6 PCS KHARAGPUR164 GI SOCKET 1.5" 7 PCS KHARAGPUR165 GI TEE 1.5" 3 PCS KHARAGPUR166 GI TEE 1"X1.5" 5 PCS KHARAGPUR167 GI TEE 1.5" X 3/4" 3 PCS KHARAGPUR168 GI TEE 1.5"X 0.5" 3 PCS KHARAGPUR169 GI ELBOW 1.5" 7 PCS KHARAGPUR170 GI ELBOW 1.5"X1" 2 PCS KHARAGPUR171 GI PLUG 1.5" 5 PCS KHARAGPUR172 GI CONNECTOR 1.5" 1 PCS KHARAGPUR173 GI STOPPER 1.5" 1 PCS KHARAGPUR

of 24


174 GI ELBOW 1.1/4" 12 PCS KHARAGPUR175 GI TEE 1 1/4" 7 PCS KHARAGPUR176 GI TEE 1 1/4" 1 PCS KHARAGPUR177 GI REDUCER 1 1/4" 2 PCS KHARAGPUR178 GI REDUCER 1 1/4" X 1" 2 PCS KHARAGPUR179 GI SOCKET 1 1/4" 2 PCS KHARAGPUR180 GI PLUG 1 1/4" 1 PCS KHARAGPUR181 GI REDUCER 1 1/4"X1" 2 PCS KHARAGPUR182 GI TEE 1" 23 PCS KHARAGPUR183 GI SOCKET 1" 36 PCS KHARAGPUR184 GI REDUCER 1" 13 PCS KHARAGPUR185 GI TEE 1"X3/4" 8 PCS KHARAGPUR186 GI PLUG 1" 1 PCS KHARAGPUR187 GI STOPPER 1" 2 PCS KHARAGPUR188 GI NEEPLE 1"X16" 1 PCS KHARAGPUR189 GI NEEPLE 1"X6" 3 PCS KHARAGPUR190 GI NEEPLE 1"X4" 2 PCS KHARAGPUR191 GI NEEPLE 1"X8" 1 PCS KHARAGPUR192 GI NEEPLE 1"X2" 3 PCS KHARAGPUR193 GI TEE 1"X1/2" 6 PCS KHARAGPUR194 GI ELBOW 1" 8 PCS KHARAGPUR195 GI ELBOW 1"X3/4" 7 PCS KHARAGPUR196 GI ELBOW 1"X1/2" 24 PCS KHARAGPUR197 GI CONNECTER (FEMALE) 1"X1" 1 PCS KHARAGPUR198 GI CONNECTER (FEMALE) 1"X16MM 1 PCS KHARAGPUR199 GI REDUCER 1"X1/2" 4 PCS KHARAGPUR200 GI REDUCER 2"X3/4" 9 PCS KHARAGPUR201 GI REDUCER 3/4" 11 PCS KHARAGPUR202 GI SOCKET 3/4" 12 PCS KHARAGPUR203 GI NIPPLE 3/4"X2" 2 PCS KHARAGPUR204 GI NEEPLE 3/4"X3" 1 PCS KHARAGPUR205 GI NEEPLE 3/4"X4" 8 PCS KHARAGPUR206 GI NEEPLE 3/4"X6" 8 PCS KHARAGPUR207 GI BEND NIPPLE 3/4"X6" 1 PCS KHARAGPUR

of 24


208 GI REDUCER 3/4"X1/2" 2 PCS KHARAGPUR209 GI ELBOW 3/4"X1/2" 1 PCS KHARAGPUR210 GI TEE 3/4" 25 PCS KHARAGPUR211 GI ELBOW 3/4" 18 PCS KHARAGPUR212 GI TEE 3/4"X1/2" 24 PCS KHARAGPUR213 GI REDUCER 1/2" 10 PCS KHARAGPUR214 GI TEE 1/2" 11 PCS KHARAGPUR215 GI ELBOW 1/2" 10 PCS KHARAGPUR216 GI SOCKET 1/2" 8 PCS KHARAGPUR217 GI NIPPLE 1/2"X4" 5 PCS KHARAGPUR218 GI NIPPLE 1/2"X3" 2 PCS KHARAGPUR219 GI NIPPLE 1/2"X12" 4 PCS KHARAGPUR220 GI NIPPLE 1/2"X16" 1 PCS KHARAGPUR221 WEAVING RING 356MM -LENO 6 PCS KHARAGPUR222 WEAVING RING 372MM -LENO 5 PCS KHARAGPUR223 FLOWER GUIDE -LENO 190 PCS KHARAGPUR224 LEVER -LENO 53 PCS KHARAGPUR225 TENSION COVER -LENO 26 PCS KHARAGPUR226 THREAD EYE -LENO 1500 PCS KHARAGPUR227 ECCENTRIC BOLT -LENO 69 PCS KHARAGPUR228 STAR 1.1MM THICK(OLD) 1000 PCS KHARAGPUR229 SPRING 310 PCS KHARAGPUR230 INNER COMB 28 PCS KHARAGPUR231 OUTER COMB 31 PCS KHARAGPUR232 COMB HOLDER 31 PCS KHARAGPUR233 SWIVEL ARM 52 PCS KHARAGPUR234 ELSTOMER TENSIONER 51 PCS KHARAGPUR235 SWIVEL ARM CLIP 100 PCS KHARAGPUR236 BUSH (BRASH) 47 PCS KHARAGPUR239 WOOLEN FELT CAP 300 PCS KHARAGPUR240 PRINTEL ADOPTER 50 PCS KHARAGPUR241 BUSH (BRASH) 45 PCS KHARAGPUR242 CAM ROLLER 10 PCS KHARAGPUR243 BOOM PIPE 13" 2 PCS KHARAGPUR

of 24


244 BOOM PIPE 10.5" 71 PCS KHARAGPUR245 BOOM PIPE 9.5" 447 PCS KHARAGPUR246 CREEL BRACKET WITH EYELET C6 5 PCS KHARAGPUR247 CREEL BRACKET C6 15 PCS KHARAGPUR248 CREEL BRACKET WTC6 130 PCS KHARAGPUR249 PHOTO CELL WITH STAND (COLOR SENSOR) 19 PCS KHARAGPUR250 PHOTO CELL BRACKET 10 SET KHARAGPUR251 CLOTH RING HOLDER 144 PCS KHARAGPUR252 STOPPER BLOCK 8 PCS KHARAGPUR253 SIDE PLATE FORM SM LSL6157401 3 PCS KHARAGPUR254 END SHEILD SM (INTERMEDIATE) 11 PCS KHARAGPUR255 CUTTER BLOCK 5.5MM 74 PCS KHARAGPUR256 CUTTER BLOCK 2.5MM 80 PCS KHARAGPUR257 SPACER 10MM 8 PCS KHARAGPUR258 CUTTER SEAL 2 PCS KHARAGPUR259 SPACER 4MM 1112 PCS KHARAGPUR260 SPACER 6MM 440 PCS KHARAGPUR261 SCREW OPENER 2 SET KHARAGPUR262 OLD UPS 1 PCS KHARAGPUR263 ANGLO FOR RP 15 HP 1 PCS KHARAGPUR264 MISPRINT PP OVEN BAGS 8434 KGS KHARAGPUR265 PP OVEN FABRIC WASTAGE 6857 KGS KHARAGPUR266 R P GRANUALS 3365 KGS KHARAGPUR

Non-Moving InkDESCRIPTION SUPPLIER CODE NO PARTY NAME BATCH NO. CLOSING LOCATION

BAJAJ BLUE LIQUECHEM L/P 1050 BAJAJ SUGER 4240317 24 KHARAGPU

R

COROMANDEL ORANGE (OLD) SPECTRUM SPP002203 COROMANDEL 32151990 60 KHARAGPU

R

COROMANDEL ORANGE (OLD) LIQUECHEM L/P 1691 COROMANDE

L 2540714 24 KHARAGPUR

COROMANDEL ORANGE (OLD) VARSHA 021-C COROMANDEL 75 KHARAGPU

R

COROMANDEL ORANGE (OLD) KAUSHIK COROMANDEL 10220115 20 KHARAGPU

R of 24


COROMANDEL RED VARSHA 032-C COROMANDEL 175 KHARAGPU

R

EXPORT BLUE (PEOCOCK) KKALPANA K/W 0068W/S EXPORT 2238WB0317 40 KHARAGPU

R

IFFCO BLUE LIQUECHEM 288C IFFCO 72 KHARAGPU

R

PURPLE KKALPANA KIW0081 PPL 2911315 BR-FASIL 80 KHARAGPU

R

NAVARATNA RED PPL (OLD) KKALPANA KW/0034 PPL 0395WE0517 140 KHARAGPUR

SAMRAT BLUE PPL LIQUECHEM L/P 1054 PPL 40 KHARAGPU

RTOTAL INK (NON MOVING) 750Non-Moving LOCATION

SWASTIK POLYMERS (mix)MASTER BATCH GOLDEN YELLOW 803 100

KHARAGPUR

PODDAR PIGMENTS LTDMASTER BATCH

GOLDEN YELLOW 9418-K2726G 21.8

KHARAGPUR

KKALPANA INDUSTRIESMASTER BATCH PPL RED 1F114 (PINK) 293

KHARAGPUR

KKALPANA INDUSTRIESMASTER BATCH ORANGE KIL/M/1E048 264

KHARAGPUR

PODDAR (MIX)MASTER BATCH GOLDEN YELLOW 4716 39.85

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH LLR RED 87

KHARAGPUR

KKALPANA INDUSTRIESMASTER BATCH GREEN 1H143 100

KHARAGPUR

KKALPANA INDUSTRIESMASTER BATCH 1H050/ PPL GREEN 267

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH LEMON GREEN 170 83

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH REGULAR GREEN 366 27

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH OXFORD BLUE 100

KHARAGPUR

of 24


SWASTIK POLYMERSMASTER BATCH REGULAR PINK 400 67.5

KHARAGPUR

RACHANA POLYMERSMASTER BATCH PARROT GREEN 04024 93

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH SILVER 200

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH BROWN 313 289

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH VIOLET 300

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH PRE GREEN 666 53

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH PRE RED 587 66.5

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH BRIGHTNER 41

KHARAGPUR

KKALPANA INDUSTRIESMASTER BATCH KIL/M/1G149 CFL blue 501

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH WHITE 110

KHARAGPUR

SWASTIK POLYMERSMASTER BATCH BLUE TSD 156.5

KHARAGPUR

3260.15

ALL THE PHOTOGRAPHS ARE INDICATIVE ONLY

of 24


Open www.ahbilimoria.com -> C lick on Customer Complaint Management Portal

of 24



Use your User ID & Password for login

of 24


Click Complaint Portal-> Click on “ Post a New Ticket ”

of 24


Post a New Ticket->Subject * ->Message * -> Email * -> Principal Company * -> Attach Document (If required any attachment) ->Submit

of 24


Your support request has been submitted successfully and the Reference No ----- is generated automatically

of 24


of 24

CATALOUGE SERIAL NO: TSL/AHB/DECEMBER/169/17-18 · Web view2019/11/14 · 31, Chowringhee Road,...

Documents

Transcript of CATALOUGE SERIAL NO: TSL/AHB/DECEMBER/169/17-18 · Web view2019/11/14 · 31, Chowringhee Road,...