Iochpe-Maxion - Apresentação da Iochpe-Maxion Fevereiro 2003
CATALOGUE - Vrtačky MAXION · CATALOGUE Made in Germany A passion for perfection 2013/14. Made in...
Transcript of CATALOGUE - Vrtačky MAXION · CATALOGUE Made in Germany A passion for perfection 2013/14. Made in...
Drilling machinesTapping machinesDrilling-Milling Machines
CATALOGUE
M a d e i n G e r m a n y w w w . m a x i o n . d e
A passion for perfection
2013
/14
M a d e i n G e r m a n y
2
Company
MAXION Jänsch & Ortlepp GmbH
Our company MAXION Jänsch & Ortlepp GmbH is an owner managed company and is situated near the
city of Jena in the east of Thuringia. We are 68 employees with an own apprenticeship training, to secure a
base of skilled workers for years.
The company has a wide – ranging manufacturing profile with a big level of vertical integration.
The biggest segment is our manufacture of drilling- and customer-specific special purpose machines
up to 50 mm drilling diameter.
The machines are sold throughout whole Europe via a diversified dealer network.
A quick – growing division is our commission processing sector with its specialization on
deep – hole drilling with CNC – milling machines. The most important automotive manufacturers
as well as their sub – contractors are numbered among our key account.
In addition we are manufacturing special purpose machines for the furniture fitting industry and for
railtrack technology. Our traditional assortment of vices, accessories for portable drilling machines and
further hand tools is carried on.
By means of determined development work our company is aimed to stand for technical progress
with high standard. Via target – oriented investments we want to consolidate and extend our location
in Pößneck furthermore.
We make sure, that you can trust in our products as well as in our skills
“Made in Germany”.
Hartmut Ortlepp Nobert Jänsch
Managing Director Managing Director
Contents
Technical Information ...................................................4–5
Bench Drilling Machines .............................................6–9
Column Drilling Machines ................................... 10–13
Drilling-Milling Machines ..............................................14
Benchings ................................................................................15
Tapping Machines..................................................... 16–19
Flow Drilling Machines ...................................................19
Customer-Specific Special Solutions............. 20–21
Coordinate Drilling Machines .....................................22
Accessories .............................................................................23
Options .....................................................................................24
Service & Delivery ..............................................................25
microtap/jobtap ..................................................................18
Quality by MAXIO
N
MADE IN GERMANY
w w w . m a x i o n . d e
3
Contact PersonsBusiness Divisions
Contact Persons
Drilling Machines, Special Solutions
Mr Winfried Müller
Sales Manager
? +49 3647 4106-12
) +49 3647 415800
Mrs Peggy Gerboth
Sales
? +49 3647 4106-34
) +49 3647 415800
Mrs Silke Dommke
Sales
? +49 3647 4106-16
) +49 3647 415800
Hand tools, Systemic machines
Mrs Kerstin Däubner
Service
? +49 3647 4106-18
) +49 3647 415800
Deep Hole Drilling/Commission Processing
Mr Norbert Jänsch
Quotations
? +49 3647 4106-25
) +49 3647 415800
Mr Danny Schmidt
Data Entry and Editing
? +49 3647 4106-32
) +49 3647 4106-33
Mr Marco Hirt
Date Setting, Organization
? +49 3647 4106-48
) +49 3647 4106-33
Quality Assurance
Mr Ingo Walter
Representative
? +49 3647 4106-44
) +49 3647 415800
Business Divisions
Manufacturing of Chuck Tool
• pneumatic clamps
• drill rigs
• machine vices
• angle grinder rigs
Deep Hole Drilling and Commission Processing
Deep hole drilling as commission processing on
IXION-AUERBACH-deep hole drilling machines:
• deep hole drilling of prismatic components
with max. weight 10 t,
drill diameter from 2 up to 32 mm
• max. drilling depth from one side 1,800 mm
• angular drillings in two angles
• connection thread and countersink
• easy milling machining
• deep drilling of Rota-components from
2.0 up to 10 mm, max. drilling depth 350 mm
external diameter max. 40 mm
CNC-Milling: vertical 500 x 2,000 mm
horizontal 800 x 630 mm
CNC-Turning: Ø 250 x 600 mm
OD-Grinding: Ø 200 x 800 mm
Manufacturing of Drilling- and Customer-
specific Special Purpose Machines
• Bench Drilling Machines
• Column Drilling Machines
• Drilling-Milling Machines
• Benchings
• Tapping Machines
• Flow Drilling Machines
• Customer-specific Special Solutions
M a d e i n G e r m a n y
4
Technical Information
Intermediate gear GV/GLV
By fitting an intermediate gear and a 0.75 kW
motor, the tapping capacity of models 15G and
15GL is increased to M 16.
Main speed range:
160 - 280 - 500 - 800 rpm.
Further speeds can be achieved by appropriate
changing of 2 V-belts:
210; 360; 620; 1,000; 1,600 and 3,000 rpm.
Machine labelling
Motor electric supply 230 V
T-slot widhts
T-slot widths in machine table respectively in
machine base.
Intermediate gear V 17085
Tapping capacity M 3 - M 16
Threads per hour 1,600
Standard drilling capacity 20 mm
Not possible for H 15 GL
V
Manufactured size
BT 13, UNIMAX 1 FREQUENZ 10 mm
BT 6, BT 18, BTB 18, BS 18, BR 18
12 mm
BT 25, BT 35 BS 20, BS 25, BS 35 BS 40, BS 50, UNIMAX 2, UNIMAX 3, UNIMAX 4,BRK 18, BRK 35
14 mm
Experience, quality and reliability
Because of using hefty steel tubes for the
columns and the robust dimensioning of all
components the deflection, even under high
drilling pressure, stays slight.
The spindles up from installation size 15/18 are
embedded in ball casters.
The quills are secured against contortions due
to self-adjusting channels.
Large, dynamically balanced v-belt pulleys
guarantee a secure power transmission
even in the lower rotation speeds
and a calmer run.
According to the EU – machine directive
2006/42/EG our machines are equipped
with electrical drill guard.
Quality by MAXIO
N
MADE IN GERMANY
BT Bench drilling machine
BS Column drilling machine
25 Installation size according to drilling performance
ST Rotation speed adjustment stepless variable
AV Electromagnetic feed (automatic feed)
PV Pneumatic feed
AVST Electromagnetic feed/Rotation speed stepless variable
G Tapping unit
GL Tapping with leadscrew
GLE Tapping with leadscrew and rapid feed
F Drilling and milling machine
FST Drilling and milling machine stepless variable
FL Flow drilling machines
w w w . m a x i o n . d e
5
Technical Information
Star knob control
The feeds are connected by light lateral pressing
of on of the the feed-levers, very easy and most
favourable arranged.
The stop is released by the same lever or
automatically after reaching the programmed
drilling depth.
For drilling machines equipped with a tapping
unit, the direction of rotation will be changed
by lateral pressing of the feed lever..
ST Stepless drives
The stepless drives are operating very calm and
are especially low-maintenance. They are easily
adjustable and have, due to the speed reduction
between intermediate gear and spindle pulley,
even in the lower rotation speeds sufficient
power reserves. (see graph)
Only cross-stabilised high performance v-belts
with a long durability are used. The rotation
speed reading is carried out on a graduated
collar with good accuracy even in the lower
range or on the digital rotation speed display.
A rotation speed variation up to ca. 10 % is
possible due to tolerances in the
motor dimensioning.
Drilling depth gauge
Drilling depth gauge for
UNIMAX 1, UNIMAX 2
and UNIMAX 3.
AV Automatic feed gear
The automatic feed gears are constructed in
four different sizes for drilling performances
from 25 up to 50 mm. All are equipped with
electromagnetic couplings for changing gears
and as overload protection.
G Tapping unit
From installation size 18 on the machines can
be equipped with a modern tapping unit G
(approx. 8 threads/min at medium rotation
speed). For machines with automatic feeds
changes the function of the feed levers by using
the tapping mode: by means of a lateral
pushing the rotating direction will be changed,
which admits comfortable successive tapping
even for ifficult material.
Attention:
Therefore option 4 is required!
The tapping unit is always combined with an
emergency push button.
Each machine is equipped with an depth stop.
There to different types are available. The main
switch is lockable with a padlock.
The release spring is adjustable to
the tool weight.
10 11 38
A I
2 7 9
Options
Packing/Delivery
9 10 11
A I
1 2 7
38
Options
Packing/DeliveryA I
7 11 38
Options
Packing/Delivery
1) Option
6
Constant capacity 14 mm
Standard capacity 15 mm
Spindle MT 2
Spindle travel 70 mm
Spindle to column 180 mm
Spindle to table up to 380 mm
Spindle to base 529 mm
Table surface 250 x 220 mm
Column diameter 65 mm
Total height 890 mm
Weight 63 kg
Pole changing motor 0.5/1.0 kW
400 V/50 Hz
Digital rotation speed display
Table adjustment via rack and pinion
ECOMAX 14 M00012
Stepless rotation speeds 420 - 2,100 rpm
Constant capacity in St 60 13 mm
Standard capacity 15 mm
Spindle B 16 or MT 2 (1)
Spindle travel 70 mm
Spindle to column 180 mm
Spindle to table up to 275 mm
Spindle to base 415 mm
Table surface 230 x 170 mm
Column diameter 65 mm
Total height 855 mm
Weight 65 kg
BT 13 20582
Motor 0.55 kW
5 rotation speeds 480 - 4,000 rpm
BT 13 P 20584
Pole changing motor 0.45/0.75 kW
10 rotation speeds 240 - 4,000 rpm
BT 13 ST 20586
Pole changing motor 0.65/1.0 kW
Stepless rotation speeds 420 - 2,100 rpm
BT 13 W 21224
Pole changing motor 0.75 kW
5 rotation speeds 480 - 4,000 rpm
Motor protection 14137
Spindle MT 2 14145
Table adjustment via rack and pinion 14147
Star feed lever | Column longer by 200 mm 14148 | 14149
Reverse switch right/left 51422
BT 13
Precise, smooth running drilling machine, high accuracy and quality.
(Image with option quick clamp device)
UNIMAX 1 FREQUENZ
Precise, smooth running standard drilling machine, high accuracy and quality. Table adjustment via rack and rotatable around column. Motor protection, star lever. Electric connection 230 V.
ECOMAX 14
Precise, smooth running and newly designed standard drilling machine, many options already included. Motor protection.
Constant capacity in St 60 15 mm
Standard capacity 18 mm
Spindle MT 2
Spindle travel 80 mm
Spindle to column 180 mm
Spindle to table up to 380 mm
Table surface 250 x 220 mm
Column diameter 65 mm
Total height 910 mm
Weight 80 kg
Reversing switch clockwise/counterclockwise rotation for tapping
Frequency-controlled 3-phase AC motor 1.1 kW
UNIMAX 1 FREQUENZ M00001
Stepless rotation speeds 200 - 4,000 rpm
Drill Package 1 58288
1 drill chuck taper MT 2/B 16
1 drill socket MT 2/MT 1
1 machine vice MSP 80
1 self clamping chuck 13 mm/B 16
If required, for tapping with key type chuck
38
When ordering please indicate your desired rotation speeds range if several are mentionend in the catalogue.For pictured machines with special equipment additional prices are applied!
Benc
h D
rilli
ng M
achi
nes
10 11 38
A I
2 7 9
Options
Packing/Delivery
1) Option
4 5 7
11 14
B
39
II
1 2 3
8 9 10
Options
Packing/Delivery
4 5 7
11 14
B
39
II
1 2 3
8 9 10
Options
Packing/Delivery
7
BTB 18
Sturdy precision drilling machine. Intermediate table with adjustment via rack. Motor protection, cross lever.
BT 18
Sturdy precision drilling machine. Headstock precisely adjustable to optimal working height. Motor protection, cross lever.
UNIMAX 1 TAP
Very powerful, universal bench drilling machine with integrated tapping unit and programmable digital display. Motor protection, Star lever. Electric connection 230 V.
Constant capacity 15 mm
Standard capacity 18 mm
Tapping capacity M 8
Spindle MT 2
Spindle travel 80 mm
Spindle to column 180 mm
Spindle to table up to 380 mm
Table surface 250 x 220 mm
Column diameter 65 mm
Total height 910 mm
Weight 80 kg
Integrated tapping unit
Frequency-controlled 3-phase AC motor 1.1 kW
UNIMAX 1 TAP M00017
Inclusive Tapping unit
Stepless rotation speeds 200 - 4,000 rpm
Rotation speeds for tapping 200 - 700 rpm
Constant capacity in St 60 18 mm
Standard capacity 20 mm
Tapping capacity M 16 (1)
Spindle MT 2
Spindle travel 100 mm
Spindle to column 215 mm
Spindle to table to 360 mm
Spindle to base 560 mm
Table surface 350 x 290 mm
Column diameter 75 mm
Total height 1,050 mm
Weight 100 kg
Pole changing motor 0.6/1.2 kW
BTB 18 66405
10 rotation speeds 240 - 3,800 rpm
BTB 18 ST 66406
Stepless rotation speeds 100 - 1,800 rpm
BTB 18 ST 66407
Stepless rotation speeds 200 - 3,600 rpm
Constant capacity in St 60 18 mm
Standard capacity 20 mm
Tapping capacity M 16 (1)
Spindle MT 2
Spindle travel 100 mm
Spindle to column 215 mm
Spindle to table 150 bis 450 mm
Table surface 220 x 285 mm
Column diameter 75 mm
Total height max. 950 mm
Weight 85 kg
Pole changing motor 0.6/1.2 kW
BT 18 66402
10 rotation speeds 240 - 3,800 rpm
BT 18 ST 66403
Stepless rotation speeds 100 - 1,800 rpm
BT 18 ST 66404
Stepless rotation speeds 200 - 3,600 rpm
Column longer by 200 mm 14154
Please provide an breakout for dipping the column in the base frame.
Drill Package 18 M00005
1 drill chuck taper MT 2/B 16
1 drill socket MT 2/MT 1
1 machine vice MSP 120
1 self clamping chuck 16 mm/B 16
If required, for tapping with key type chuck.
39Drill Package 1 58288
1 drill chuck taper MT 2/B 16
1 drill socket MT 2/MT 1
1 machine vice MSP 80
1 self clamping chuck 13 mm/B 16
If required, for tapping with key type chuck
38
Digital display for rotation speeds for BT 18 ST and BTB 18 ST as standard.
When ordering please indicate your desired rotation speeds range if several are mentionend in the catalogue.For pictured machines with special equipment additional prices are applied!
Benc
h D
rilli
ng M
achi
nes
6 7 8
14 40
C III
2 4 5
10 12 13
Options
Packing/Delivery
6 7 8
13 14
C
40
III
2 4 5
9 10 12
Options
Packing/Delivery
39
B II
2 7 10
Options
Packing/Delivery
1) Option
8
UNIMAX 2T
Powerful and precise universal bench drilling machine to cover large operative range. Vertical setting and clamping from front side. Headstock rotatable through 360°. Reverse switch for tapping. Adjustment of speed by potentiometer.
BT 25
Powerful and precise universal bench drilling machine with large operative range. Headstock vertically adjustable, rotatable around column by 360°. Motor protection, cross lever.
BT 25 AV
Powerful and precise universal bench drilling machine for production, electro-magnetic clutch for feed. Headstock vertically adjustable, rotatable around column by 360°. Motor protection. Cross lever.
Constant capacity in St 60 18 mm
Standard capacity 20 mm
Tapping capacity M 12
Spindle MT 2
Spindle travel 100 mm
Spindle to column 225 mm
Spindle to table 60 to 440 mm
Table surface 345 x 372 mm
Column diameter 90 mm
Total height 955 mm
Weight 110 kg
Frequency-controlled 3-phase motor 1.5 kW
UNIMAX 2T 44667
Stepless rotation speeds
Range A 100 - 2,000 rpm
Range B 200 - 4,000 rpm
Please provide an breakout for dipping the column in the base frame.
Constant capacity in St 60 25 mm
Standard capacity 30 mm
Tapping capacity M 20 (1)
Spindle MT 3
Spindle travel 120 mm
Spindle to column 260 mm
Spindle to table 220 to 600 mm
Table surface 390 x 420 mm
Column diameter 110 mm
Total height max. 1,200 mm
Weight 215 kg
Pole changing motor 0.8/1.5 kW
BT 25 50632
10 rotation speeds 80 - 1,400 rpm
BT 25 70728
10 rotation speeds 120 - 2,160 rpm
BT 25 70729
10 rotation speeds 160 - 2,800 rpm
BT 25 ST 50633
Stepless rotation speeds 80 - 1,400 rpm
BT 25 ST 70736
Stepless rotation speeds 120 - 2,160 rpm
BT 25 ST 70737
Stepless rotation speeds 160 - 2,800 rpm
Column longer by 200 mm 49393
Please provide an breakout for dipping the column in the base frame.
Constant capacity in St 60 25 mm
Tapping capacity M 20 (1)
Spindle MT 3
Automatic feed 0.1 - 0.16 - 0.25 mm/turn
Spindle travel 120 mm
Spindle to column 260 mm
Spindle to table 220 to 600 mm
Table surface 390 x 420 mm
Column diameter 110 mm
Total height max. 1,200 mm
Weight 235 kg
Pole changing motor 0.8/1.5 kW
BT 25 AV 61979
10 rotation speeds 80 - 1,400 rpm
BT 25 AV 70730
10 rotation speeds 120 - 2,160 rpm
BT 25 AV 70732
10 rotation speeds 160 - 2,800 rpm
BT 25 AVST 61980
Stepless rotation speeds 80 - 1,400 rpm
BT 25 AVST 70734
Stepless rotation speeds 120 - 2,160 rpm
BT 25 AVST 70735
Stepless rotation speeds 160 - 2,800 rpm
Column longer by 200 mm 49393
Please provide an breakout for dipping the column in the base frame.
Drill Package 18 M00005
1 drill chuck taper MT 2/B 16
1 drill socket MT 2/MT 1
1 machine vice MSP 120
1 self clamping chuck 16 mm/B 16
If required, for tapping with key type chuck.
39
For UNIMAX 2, BT 25 ST, BT 25 AVST digital display for rotation speeds as standard.
Benc
h D
rilli
ng M
achi
nes
1
12
7 9 10
A I
2 6
Options
Packing/Delivery
6 7 8
14
C III
2 4 5
10 12 13
Options
Packing/Delivery
6 7 8
14
C III
2 4 5
10 12 13
Options
Packing/Delivery
1) Option
9
BT 35
Solid, multi-purpose bench drilling machine. Headstock vertically adjustable, rotatable through 360°. Motor protection, cross lever.
BT 35 AV
Solid and precise universal bench drilling machine for production, electro-magnetic clutch for feed. Headstock vertically adjustable, rotatable through 360°. Motor protection. Cross lever.
BT 6
Sensitive precision drilling machine, extremly smooth running. In particular suitable for precision and electronic engineering. Motor protection.
Constant capacity in St 60 35 mm
Standard capacity 40 mm
Tapping capacity M 30 (1)
Spindle MT 4
Spindle travel 150 mm
Spindle to column 280 mm
Spindle to table 220 to 600 mm
Table surface 390 x 420 mm
Column diameter 120 mm
Total height max. 1,250 mm
Weight 250 kg
Pole changing motor 1.3/2.3 kW
BT 35 66944
12 rotation speeds 80 - 1,400 rpm
BT 35 66945
12 rotation speeds 160 - 2,800 rpm
BT 35 ST 66947
Stepless rotation speeds 80 - 1,400 rpm
BT 35 ST 66948
Stepless rotation speeds 160 - 2,800 rpm
Column longer by 200 mm 14172
Please provide an breakout for dipping the column in the base frame.
Constant capacity in St 60 35 mm
Tapping capacity M 30 (1)
Spindle MT 4
Automatic feed 0,1 - 0.2 - 0.3 mm/turn
Spindle travel 150 mm
Spindle to column 280 mm
Spindle to table 220 to 600 mm
Table surface 390 x 420 mm
Column diameter 120 mm
Total height max. 1,250 mm
Weight 265 kg
Pole changing motor 1.3/2.3 kW
BT 35 AV 66949
12 rotation speeds 80 - 1,400 rpm
BT 35 AV 66950
12 rotation speeds 160 - 2,800 rpm
BT 35 AVST 66951
Stepless rotation speeds 80 - 1,400 rpm
BT 35 AVST 66952
Stepless rotation speeds 160 - 2,800 rpm
Column longer by 200 mm 14172
Please provide an breakout for dipping the column in the base frame.
Drilling capacity in St 60 0.5 - 6 mm
Spindle B 12 or MT 1 (1)
Spindle travel 55 mm
Spindle to column 180 mm
Spindle to table 135 to 380 mm
Table surface 220 x 285 mm
Column diameter 75 mm
Total height max. 800 mm
Weight 73 kg
Pole changing motor 0.37/0.6 kW
BT 6 66391
8 rotation speeds 630 - 7,100 rpm
BT 6 66392
8 rotation speeds 900 - 10,000 rpm
BT 6 66393
8 rotation speeds 1.080 - 12,000 rpm
Albrecht Super Chuck 6 mm
Chuck range up to 6 mm 44052
Spindle MT 1 47291
Please provide an breakout for dipping the column in the base frame.
For BT 35 ST, BT 35 AVST digital display for rotation speeds as standard.
Benc
h D
rilli
ng M
achi
nes
When ordering please indicate your desired rotation speeds range if several are mentionend in the catalogue.For pictured machines with special equipment additional prices are applied!
1) Option
40 41
C III
7 10
Options
Packing/DeliveryC II
7 10 39
Options
Packing/Delivery
5 7 8
14 39
C II
1 3 4
9 10 11
Options
Packing/Delivery
10
BS 18
Light, but efficient column drilling machine. Table adjustable 350 mm via rack and pinion, rotatable around column.Motor protection, cross lever.
UNIMAX 2S
Powerful and precise column drilling machine with large operative range. Table adjustable via rack and pinion, rotatable around column.Reverse switch for tapping. Adjustment of speed via potentiometer.
UNIMAX 3
Powerful and precise column drilling machine with large operative range, drilling table adjustable via rack and pinion, rotatable around column. Reverse switch for tapping. Emergency push button. Motor protection. Star lever.
Constant capacity in St 60 18 mm
Standard capacity 20 mm
Tapping capacity M 16 (1)
Spindle MT 2
Spindle travel 100 mm
Spindle to column 215 mm
Spindle to table to 820 mm
Table surface 350 x 290 mm
Column diameter 75 mm
Total height 1,720 mm
Weight 125 kg
Pole changing motor 0.6/1.2 kW
BS 18 66408
10 rotation speeds 240 - 3,800 rpm
BS 18 ST 66409
Stepless rotation speeds 100 - 1,800 rpm
BS 18 ST 66410
Stepless rotation speeds 200 - 3,600 rpm
Constant capacity in St 60 18 mm
Standard capacity 20 mm
Tapping capacity M 12
Spindle MT 2
Spindle travel 100 mm
Spindle to column 225 mm
Spindle to table 55 to 880 mm
Table surface 450 x 315 mm
Column diameter 90 mm
Total height 1,745 mm
Weight 170 kg
Frequency-controlled 3-phase motor 1.5 kW
UNIMAX 2S 44668
Stepless rotation speeds
Range A 100 - 2,000 rpm
Range B 200 - 4,000 rpm
Constant capacity in St 60 25 mm
Standard capacity 30 mm
Tapping capacity M 20
Spindle MT 3
Spindle travel 125 mm
Spindle to column 260 mm
Spindle to table 90 to 840 mm
Table surface 500 x 365 mm
Column diameter 110 mm
Total height 1,855 mm
Weight 250 kg
Pole changing motor 0.8/1.5 kW
UNIMAX 3 37704
Stepless rotation speeds
Range A 80 - 1,440 rpm
Range B 180 - 3,200 rpm
Drill Package 3 37705
1 drill chuck taper MT 3/B 16
2 reduction insert MT 3/MT 2, MT 3/MT 1
1 machine vice MSP 140
1 self clamping chuck 16 mm/B 16
If required, for tapping with key type chuck.
40
Mill Package 37706
1 fine feed 1 compound table MF 3
1 clamping for quill 1 milling chuck taper MT 3
1 draw-in rod 3 collets 8, 10, 12 mm
41
Drill Package 18 M00005
1 drill chuck taper MT 2/B 16
1 drill socket MT 2/MT 1
1 machine vice MSP 120
1 self clamping chuck 16 mm/B 16
If required, for tapping with key type chuck.
39 Drill Package 2 45105
1 drill chuck taper MT 2/B 16
1 drill socket MT 2/MT 1
1 machine vice MSP 120
1 self clamping chuck 16 mm/B 16
If required, for tapping with key type chuck.
39
For BS 18 ST, UNIMAX 2S, UNIMAX 3 digital display for rotation speeds as standard.
Colu
mn
Dri
lling
Mac
hine
s
1) Option, 3) also available as bench drilling machine
7 8 10
16 40
C III
4 5 6
12 13 14
Options
Packing/Delivery
7 8 9
14 16
C
40
III
4 5 6
10 12 13
Options
Packing/Delivery
13
C III
4 7 10
Options
Packing/Delivery
11
UNIMAX 3 AV(3)
Modern and precise column drilling machine for manu-facturing according to the succesful concept of Unimax 3 with stepless variable feed drive, automatic tool ejector and chip breakage control as standard. Feed, rotation speeds as well as drilling depth are shown in digital dis-play. Reversing switch clockwise/counterclockwise rotati-on for tapping. Emergency push button. Motor protection.
BS 25
Powerful and precise column drilling machine with large operative range, drilling table adjustable via rack and pinion, rotatable around column.Machine base without T-slots.Motor protection, cross lever.
BS 25 AV
Powerful and precise production column drilling machine. Electromagnetic clutch for feed. Table adjustable via rack and pinion, rotatable around column. Machine base without T-slots.Motor protection.
Constant capacity in St 60 25 mm
Tapping capacity M 20 (1)
Spindle MT 3
Feed stepless variable within the range
30 - 400 mm/min
Programmable drilling depth 125 mm
Spindle to column 260 mm
Spindle to table 90 to 840 mm
Table surface 500 x 365 mm
Column diameter 110 mm
Total height 1,900 mm
Weight 280 kg
Pole changing motor 0.8/1.5 kW
UNIMAX 3 AV M00003
Stepless rotation speeds
Range A 80 - 1,440 rpm
Range B 180 - 3,200 rpm
Constant capacity in St 60 25 mm
Standard capacity 30 mm
Tapping capacity M 20 (1)
Spindle MT 3
Spindle travel 120 mm
Spindle to column 260 mm
Spindle to table 90 to 760 mm
Table surface 500 x 365 mm
Column diameter 110 mm
Total height 1,850 mm
Weight 260 kg
Pole changing motor 0.8/1.5 kW
BS 25 50641
10 rotation speeds 80 - 1,400 rpm
BS 25 70742
10 rotation speeds 120 - 2,160 rpm
BS 25 70743
10 rotation speeds 160 - 2,800 rpm
BS 25 ST 50644
Stepless rotation speeds 80 - 1,400 rpm
BS 25 ST 70746
Stepless rotation speeds 120 - 2,160 rpm
BS 25 ST 70747
Stepless rotation speeds 160 - 2,800 rpm
Column longer by 100 mm 26433
Constant capacity in St 60 25 mm
Tapping capacity M 20 (1)
Spindle MT 3
Automatic feed 0.1-0.16-0.25 mm/turn
Spindle travel 120 mm
Spindle to column 260 mm
Spindle to table 90 to 760 mm
Table surface 500 x 365 mm
Column diameter 110 mm
Total height 1,850 mm
Weight 275 kg
Pole changing motor 0.8/1.5 kW
BS 25 AV 50674
10 rotation speeds 80 - 1,400 rpm
BS 25 AV 70740
10 rotation speeds 120 - 2,160 rpm
BS 25 AV 70741
10 rotation speeds 160 - 2,800 rpm
BS 25 AVST 50675
Stepless rotation speeds 80 - 1,400 rpm
BS 25 AVST 70744
Stepless rotation speeds 120 - 2,160 rpm
BS 25 AVST 70745
Stepless rotation speeds 160 - 2,800 rpm
Column longer by 100 mm 26433
For UNIMAX 3, UNIMAX 3 AV, BS 25 ST, BS 25 AVST digital display for rotation speeds as standard.
When ordering please indicate your desired rotation speeds range if several are mentionend in the catalogue.For pictured machines with special equipment additional prices are applied!
Colu
mn
Dri
lling
Mac
hine
s
1) Option
7 8 10
16
C IV
4 5 6
12 13 14
Options
Packing/Delivery
44
7 8 10
16
C IV
4 5 6
12 13 14
Options
Packing/Delivery
44
13 16
D V
7 10 12
Options
Packing/Delivery
44
12
Constant capacity in St 60 35 mm
Standard capacity 40 mm
Tapping capacity M 30 (1)
Spindle MT 4
Spindle travel 150 mm
Spindle to column 280 mm
Spindle to table 85 to 755 mm
Table surface 550 x 400 mm
Column diameter 120 mm
Total height 2,020 mm
Weight 350 kg
Pole changing motor 1.3/2.3 kW
BS 35 66931
12 rotation speeds 80 - 1,400 rpm
BS 35 66934
12 rotation speeds 160 - 2,800 rpm
BS 35 ST 66935
Stepless rotation speeds 80 - 1,400 rpm
BS 35 ST 66936
Stepless rotation speeds 160 - 2,800 rpm
Column longer by 100 mm 26443
Electric coolant equipment in base-plate with T-slots.
26441
Constant capacity in St 60 35 mm
Tapping capacity M 30 (1)
Spindle MT 4
Automatic feed 0.1 - 0.2 - 0.3 mm/turn
Spindle travel 150 mm
Spindle to column 280 mm
Spindle to table 85 to 755 mm
Table surface 550 x 400 mm
Column diameter 120 mm
Total height 2,020 mm
Weight 365 kg
Pole changing motor 1.3/2.3 kW
BS 35 AV 66938
12 rotation speeds 80 - 1,400 rpm
BS 35 AV 66939
12 rotation speeds 160 - 2,800 rpm
BS 35 AVST 66940
Stepless rotation speeds 80 - 1,400 rpm
BS 35 AVST 66941
Stepless rotation speeds 160 - 2,800 rpm
Column longer by 100 mm 26443
Electric coolant equipment in base-plate with T-slots
26441
BS 35
Powerful column drilling machine for universal application. Drilling table with T-slots, adjustable in height via rack and pinion. Table and headstock rotatable. Machined base plate with t-slots.Motor protection. Cross lever.
BS 35 AV
Strong and precise column drilling machine for production. Electromagnetic clutch for feed. Worktable adjustable via rack and pinion, rotatable around column. Base plate with T-slots.Motor protection. Cross lever.
UNIMAX 4 Basic
Universal and very modern column drilling machine with MT 4, tapping unit, enormous capacity and good price-performance ratio. Digital rotation speeds and drilling depth display.Cross lever. Chip breakage.
Constant capacity in St 60 35 mm
Standard capacity 40 mm
Tapping capacity M 30
Spindle MT 4
Automatic feed stepless variable 20 - 400 mm/min
Drilling depth programmable 175 mm
Distance spindle/table 70 - 830 mm
Distance spindle to column 300 mm
Table surface 550 x 400 mm
Column diameter 120 mm
Total height 1,980 mm
Weight 450 kg
Pole-changing motor 1.5/3.0 kW
Operating voltage 400 V
Frequency 50 Hz
Power fuse 16 A
UMIMAX 4 Basic M00014
Tapping unit included
stepless rotation speeds:
Range A 120 - 2,500 rpm
Range B 60 - 1,250 rpm
Functions Chip breakage
Option Chip removal M00015
Option Free-cutting device M00016
For BS 35 ST, BS 35 AVST digital display for rotation speeds as standard.
Drill Package 4 M00018
1 drill chuck taper MT 4/B 16
3 reduction insert MT 4/3, MT 4/2, MT 4/1
44 1 machine vice MSP 140
1 self clamping chuck 16 mm/B 16
If required, for tapping with key type chuck
Colu
mn
Dri
lling
Mac
hine
s
1) Option
7 8 10
16
E VI
4 5 6
12 14 10
Options
Packing/DeliveryD V
7 10 16
Options
Packing/Delivery Packing/Delivery on request
44
13
Constant capacity in St 60 40 mm
Standard capacity 45 mm
Tapping capacity M 36
Spindle MT 4
Feed rate 30 - 1,650 mm/min
Automatic feeds freely programmable
Spindle travel 175 mm
Spindle to column 300 mm
Spindle to table 70 to 830 mm
Table surface 600 x 450 mm
Column diameter 140 mm
Total height 1,980 mm
Weight 450 kg
Frequency-controlled 3-phase motor 7.5 kW
UNIMAX 4 52508
Stepless rotation speeds 30 - 2,400 rpm
Quick-change tapping chuck. Chuck with MT3 and length compensation on tension.
M 3 - M 14 59031
M 4.5 - M 24 56484
M 14 - M 36 59032
Insert for quick change tapping chuck, available without overload clutch. Please name required insert when ordering.
M 3 - M 14 59034
M 4.5 - M 24 59033
M 14 - M 36 59035
Constant capacity in St 60 50 mm
Tapping capacity M 45 (1)
Spindle MT 4 or MT 5 (1)
Automatic feeds 4
Spindle travel 200 mm
Spindle to column 325 mm
Spindle to table 80 bis 675 mm
Table surface 650 x 500 mm
Column diameter 160 mm
Total height 2,070 mm
Weight 670 kg
Pole changing motor 2.0/3.8 kW
BS 50 AVST 66957
Stepless rotation speeds 35 - 1,060 rpm
with auto feed 0.1-0.18-0.28-0.45 mm/turn
BS 50 AVST 66958
Stepless rotation speeds 50 - 1,500 rpm
with auto feed 0.08-0.12-0.2-0.32 mm/turn
BS 50 AVST 66959
Stepless rotation speeds 66 - 2,000 rpm
with auto feed 0.06-0.09-0.15-0.25 mm/turn
Spindle MT 5 51890
UNIMAX 4
Powerful, universally applicable column drilling machi-ne with stepless programmable feeds and rotation speeds. As simple as a conventional one, but with functions of a controlled machine. Adapted user interface for workshop needs, input via touchscreen.
UNIMAX 4 Revolver
In addition to machining centers or as stand-alone for production of parts in small or medium quanti-ties this easy-to-use column drilling machine is designed with a revolving drilling head.
A complete processing cycle can be program-med in this machine and run automatically at a keystroke.
For each of up to 6 spindles can be freely programmed: rotation speeds – rapid feed – working feed – clockwise/counterclockwise rotation – chip removal or chip breakage – bridging voids in profiles – coolant on/off – change of rotational direction.
Revolver drilling heads for different maximum diameters can be offered on request.
BS 50 AVST
High performance drilling machine. Electromagnetic clutch for feedStepless rotation speeds. Train of gear wheels in 2 steps. Recirculating oil lubrication system. Table adjustment on frontside. Motor protection. Cross lever.
For BS 50 AVST digital display for rotation speeds as standard.
When ordering please indicate your desired rotation speeds range if several are mentionend in the catalogue.For pictured machines with special equipment additional prices are applied!
Colu
mn
Dri
lling
Mac
hine
s
1) Option, 2) DIN 2079
12 13 22
26 36
D
44
VI
5
4
6 7
23 24 25
Options
Packing/Delivery
12 13 22
4
26 36
D
40
IV
5 6 7
23 24 25
Options
Packing/Delivery
7 12 20
39
C III
4 5 6
21 25 26
Options
Packing/Delivery
14
Spindle MT 2
Drawbar M 10
Quill stroke 75 mm
Standard capacity 20 mm
Tapping capacity M 16 (1)
Spindle/Compound table max. 480 mm
Table surface 430 x 240 mm
Long/cross traverse 240/160 mm
Column diameter 75 mm
Weight 220 kg
Total height max. 1,670 mm
Pole changing motor 0.7/1.3 kW
BT 18 F 67112
10 rotation speeds 240 - 3,800 rpm
BT 18 FST 67113
Stepless rotation speeds 100 - 1,800 rpm
BT 18 FST 67114
Stepless rotation speeds 200 - 3,600 rpm
Spindle MT 3 or SK 30 (1)
Drawbar M 12
Quill stroke 100 mm
Standard capacity 30 mm
Tapping capacity M 20 (1)
Spindle/Compound table 80 to 450 mm
Table surface 600 x 240 mm
Long/cross traverse 350/160 mm
Column diameter 110 mm
Weight 340 kg
Total height max. 1,920 mm
Pole changing motor 0.8/1.5 kW
BT 25 F 61935
10 rotation speeds 80 - 1.400 min-1
BT 25 F 70750
10 rotation speeds 120 - 2.160 min-1
BT 25 F 70751
10 rotation speeds 160 - 2.800 min-1
BT 25 FST 61909
Stepless rotation speeds 80 - 1.400 min-1
BT 25 FST 70752
Stepless rotation speeds 120 - 2.160 min-1
BT 25 FST 70753
Stepless rotation speeds 160 - 2.800 min-1
Spindle SK 30 (2) | 3 feeds 53736 | 14263
Spindle MT 4 or SK 30 (1)
Drawbar M 16 or M 12
Quill stroke 130 mm
Standard capacity 35 mm
Tapping capacity M 30 (1)
Spindle/Compound table 60 to 430 mm
Table surface 800 x 240 mm
Long/cross traverse 470/245 mm
Column diameter 120 mm
Weight 500 kg
Total height max. 1,970 mm
Pole changing motor 1.3/2.3 kW
BT 35 F 73734
12 rotation speeds 80 - 1,400 rpm
BT 35 F 73733
12 rotation speeds 160 - 2,800 rpm
BT 35 FST 68795
Stepless rotation speeds 80 - 1,400 rpm
BT 35 FST 68116
Stepless rotation speeds 160 - 2,800 rpm
Spindle SK 30 (2) 68134
3 Feeds 14230
BT 18 F
Small but highly efficient drilling and milling machine with a wide working range. Smooth drive and perfect quill locking ensure a good surface finish when milling. Tightening of milling tools from inside. The compound table guide and adjustment are precise. Increments 0.05 mm, clamping for both axes.Motor protection.
BT 25 F
An accurate and handy drilling and milling machine with a wide working range. The extremly smooth drive and proper quill locking ensure a good surface finish when milling. Headstock adjustable in height, can be swivelled to either side. The compound table guide and adjustment are precise. Increments 0.05 mm, clamping in both axes. Motor protection.
BT 35 F
Solid, precise drilling and milling machine with a wide working range. A very smooth running drive and perfect quill locking ensure a good surface finish when milling. Headstock can be swivelled to either side. The compound table guide and adjustment are precise. Increments 0.05 mm,Clamping in both axes. Motor protection.
BT 25 F, BT 35 F are illustrated with additional equipment. Please ask for additional prices.
Information All Drilling-milling machines on floor unit.
For BT 18 FST, BT 25 FST, BT 35 FST digital display for rotation speeds as standard.
Dri
lling
-Mill
ing
Mac
hine
s
1) Option
E EPacking Packing
15
Distance between units 370 mm
Height of table 860 mm
Length of table = number of heads x 370 mm
Depth of table 460 mm
Throat working depth 340 mm
Alternative heads:
BT 6, BT 18, BT 15 G, BT 15 GL, BT 15 GLE
For PV empty location necessary.
The total cost of a BRK 18 multi-head unit is calculated from the required base, i.e. table bed and cast pedestals, plus the relevant individual prices of the units mounted.
Base BRK 18/3 61931
Base BRK 18/4 61990
Base BRK 18/5 61991
Base BRK 18/6 61992
Electrical coolant equipment 60 l best price.
14247
Extra charge for each connected unit 14248
Distance between units 450 mm
Height of table 860 mm
Length of table = number of heads x 450 mm
Depth of table 680 mm
Throat working depth 460 mm
Alternative heads:
BT 23 GL, BT 25, BT 25 AV, BT 30 GL, BT 30 GLE, BT 35, BT 35 AV
The total cost of a BRK 35 multi-head unit is calculated from the required base, i.e. table bed and cast pedestals, plus the relevant individual prices of the units mounted.
Base BRK 35/3 61993
Base BRK 35/4 61994
Base BRK 35/5 61995
Base BRK 35/6 61997
Electrical coolant equipment 60 l base price
14246
Extra charge for each connected unit 14248
BRK 18
The BRK 18 multi-head units are mounted on box-type stands and can be supplied with 3, 4, 5 or 6 units. Each box-type stand has two storage shelves. The heavy, torsionresistant cast-iron table has two T-slots.The electrical equipment is clearly laid out in a central terminal switch-box.
BRK 18, BRK 35 From 2 units on the machine is serially equipped with emergency push button at the sliding operator panel.
When ordering please indicate your desired rotation speeds range if several are mentionend in the catalogue.For pictured machines with special equipment additional prices are applied!
BRK 35
The BRK 35 multi-head units are mounted on box-type stands and can be supplied with 3, 4, 5 or 6 units. Each box-type stand has two storage shelves. The heavy, torsionresistant cast-iron table has two T-slots. Units can be pivoted over table top.The electrical equipment is clearly laid out in a central terminal switch-box.
Benc
hing
s
3) both as bench and column drilling machines available
14 27 28
35 37
B II
2 6 12
29 32 33
Options
Packing/Delivery
14 27 28
35 37
C III
2 6 12
29 32 33
Options
Packing/Delivery
14 27 28
37
B II
2 6 12
29 33 35
Options
Packing/Delivery
16
Tapping capacity M 3 - M 10
Threads per hour 500
Standard capacity 15 mm
Spindle MT 2
Depth of thread 80 mm
Spindle travel 100 mm
Spindle to column 215 mm
Table surface BT 15 G 220 x 285 mm
Column diameter 75 mm
Total height BT 15 G max. 950 mm
Weight BT 15 G 90 kg
Special motor 0.55 kW
BT 15 G as bench machine 66415
4 rotation speeds 320 - 1,600 rpm
BS 15 G as column machine 66417
Mechanical equipment like BS 18 (see page 10)
Column longer by 200 mm for BT 14154
Tappet for fine adjustment for depth of thread
14198
Tapping capacity M 3 - M 10
Threads per hour 1,000
Standard capacity 15 mm
Spindle MT 2
Depth of thread 60 mm
Spindle travel 100 mm
Spindle to column 215 mm
Table surface BT 15 GL 220 x 285 mm
Column diameter 75 mm
Total height BT 15 GL max. 950 mm
Weight BT 15 GL 95 kg
Special motor 0.55 kW
BT 15 GL as bench machine 66418
4 rotation speeds 320 - 1,600 rpm
BS 15 GL as column machine 66420
Mechanical equipment like BS 18 (see page 10)
Leadscrew 115
Leadscrew < 0.5 mm and/or left-hand threads
116
Bottoming release switch 14210
Force ventilated motor 14216
Column longer by 200 mm for BT 14154
Tapping capacity M 3 - M 20
Threads per hour 1,200
Standard capacity 28 mm
Spindle MT 3
Depth of thread 90 mm
Spindle travel 120 mm
Spindle to column 260 mm
Spindle to table 220 to 600 mm
Table surface 390 x 420 mm
Column diameter 110 mm
Total height max. 1,200 mm
Weight 270 kg
Special motor 0.9 kW
BT 23 GL as bench machine 13562
5 rotation speeds 100 - 900 rpm
BT 23 GL as bench machine 73957
5 rotation speeds 150 - 1,350 rpm
BS 23 GL as column machine 73958
5 rotation speeds 100 - 900 rpm
BS 23 GL as column machine 73959
5 rotation speeds 150 - 1,350 rpm
Leadscrew 119
Leadscrew < 0.7 mm and/or left-hand threads 120
Bottoming release switch 14211
Force ventilated motor 14227
Column longer by 200 mm for BT 23 GL 14167
Note GL-machines can, if required, also be used without lead screw for drilling or tapping.
BT 15 G(3)
High performance tapping machine. Manual feed until the tool begins to cut. Automatic shift in rotating direction. Cross lever.Programme for drilling single and continuous cycles.
BT 15 GL(3)
High performance tapping machine with leadscrew and optimum safety arrangement for prevention of tool breakage. Programme for drilling single and continuous cycles. Electronically controlled motor braking for single cycle operation.Simple replacement of leadscrew by means of quick coupling. Detachable feed lever supplied.
BT 23 GL(3)
High performance tapping machine with leadscrew and optimum safety arrangement for prevention of tool breakage. Programme for drilling single and continuous cycles. Electronically controlled motor braking for single cycle operation. Easy change of leadscrew by means of quick coupling. Detachable feed lever supplied.
Tapp
ing
Mac
hine
s
1) Option, 3) both as bench and column drilling machines available
32 33 35
B I
27 28 29
37
Options
Packing/Delivery
16 28 29
37
E VI
6 12 14
32 33 35
Options
Packing/Delivery
16 27 28
35 37
C III
6 12 14
29 32 33
Options
Packing/Delivery
17
Tapping capacity M 5 - M 30
Threads per hour 800
Standard capacity 35 mm
Spindle MT 4
Depth of thread 90 mm
Spindle travel 150 mm
Spindle to column 280 mm
Spindle to table 85 to 755 mm
Table surface 550 x 400 mm
Column diameter 120 mm
Total height 2,020 mm
Weight 365 kg
Special motor 1.2 kW
BT 30 GL as bench machine 67095
5 rotation speeds 80 - 440 rpm
BT 30 GL as bench machine 67096
5 rotation speeds 160 - 880 rpm
BS 30 GL as column machine 67092
5 rotation speeds 80 - 440 rpm
BS 30 GL as column machine 67093
5 rotation speeds 160 - 880 rpm
Leadscrew 119
Leadscrew < 0.7 mm and/or left-hand threads 120
Bottoming release switch 14212
Force ventilated motor 14231
Column longer by 100 mm for BS 30 GL 14179
Tapping capacity M 6 - M 45
Threads per hour 600
Standard capacity 50 mm
Spindle MT 4 or MT 5 (1)
Depth of thread 150 mm
Spindle travel 200 mm
Spindle to column 325 mm
Spindle to table 80 to 675 mm
Table surface 650 x 500 mm
Column diameter 160 mm
Total height 2,150 mm
Weight 680 kg
Pole changing motor 1.8/3.4 kW
BS 50 GL 67464
Stepless rotation speeds 35 - 530 rpm
BS 50 GL 67465
Stepless rotation speeds 50 - 750 rpm
Leadscrew 131
Leadscrew < 1.0 mm and/or left-hand threads
132
Bottoming release switch 14213
Force ventilated motor 14236
Spindle MT 5 59333
Coolant equipment in baseplate 26452
Tapping capacity M 3 - M 10
Threads per hour 1,000
Spindle MT 2
Depth of thread 60 mm
Special motor 0.55 kW
H 15 GL 13476
4 rotation speeds 320 - 1,600 rpm
Leadscrew 115
Leadscrew < 0.5 mm and/or left-hand threads
116
Foot switch 44960
Bottoming release switch 14210
Force ventilated motor 14216
BS 30 GL(3)
High performance tapping machine with leadscrew and optimum safety arrangement for prevention of tool breakage. Programme for drilling single and continuous cycles. Electronically controlled motor braking for single cycle operation. Easy change of leadscrew by means of quick coupling.
BS 50 GL(3)
Heavy, high-performance tapping machine. Operating mode as for BS 30 GL. Additional equipment: Return stroke at double speed (dR). Stepless rotation speeds. Toothed reduction transmission in two stages. Recirculating oil lubrication system. Table adjustment in front.
H 15 GL
High performance tapping machine as horizontal unit, tip height 125 mm, with leadscrew and optimal protection device against tool breakage. Programme for drilling single and continuous cycles.Electronically controlled motor braking for single cycle operation. Easy change of leadscrew by means of quick coupling.
When ordering please indicate your desired rotation speeds range if several are mentionend in the catalogue.For pictured machines with special equipment additional prices are applied!
Tapp
ing
Mac
hine
s
4) On request, 5) Not for workshop model MAXION jobtap
D IPacking/Delivery
18
MMS
Tapping perfor-mance
X5CrNi189/1,4435 M 1 - M 5 M 2.5 - M 8 M 3.5 - M 12 M 4 - M 14
9sMn28/1,0715 M 1 - M 6 M 2.5 - M 10 M 3.5 - M 11 M 4 - M 18
AlCuMgPb/3,1645 M 1 - M 6 M 2.5 - M 12 M 3.5 - M 16 M 4 - M 20
MICROTAP/JOBTAP G5 G8 G14 G16
Max. tapping depth/stroke 45/65 mm 75/85 mm 75/85 mm 75/85 mm
Insert holder quick change system SWS 0 SWS 1 SWS 2 SWS 3
inkl. 5 inserts inkl. 6 inserts inkl. 7 inserts inkl. 9 inserts
Insert holder/spindle B 10 B 12 B 12 B 12
Distance tool holder/worktable 0 - 280 mm 0 - 400 mm 0 - 400 mm 0 - 400 mm
Torque range Mz (stepless) 5 - 220 Ncm 50 - 700 Ncm 120 - 1,680 Ncm 150 - 2,100 Ncm
Spindle speed range (stepless) 250 - 2,200 rpm 300 - 3,000 rpm 125 - 1,250 rpm 100 - 1,000 rpm
Width 323 mm 312 mm 312 mm 312 mm
Depth 510 mm 530 mm 544 mm 544 mm
Height 780 mm 930 mm 930 mm 930 mm
Weight net 51.4 kg 61.7 kg 63.3 kg 63.3 kg
Column (adjustable with hand wheel) 600 mm 750 mm 750 mm 750 mm
Base plate 280 x 475 x 50 mm 280 x 475 x 50 mm 280 x 475 x 50 mm 280 x 475 x 50 mm
2 x T-slot M 12 x 14 M 12 x 14 M 12 x 14 M 12 x 14
Mains voltage 230 V~/ 50 - 60 Hz 230 V~/ 50 - 60 Hz 230 V~/ 50 - 60 Hz 230 V~/ 50 - 60 Hz
Power consumption 300 W 2,900 W 2,900 W 2,900 W
Options/Accesories
microtap/jobtap
ZAP Z-axis controlled pneumatic feeding system
MMS controllable minimum quantity lubricant unit
SWS & SZS quick change tool holder system & optional-fixed collet holder system (4)
DSK double spindle head adapter
SHV & HVS column special size & horizontal adjustment (4)
LSM spindle motor air seal
MLM magnetic machine light
SSB/ASL security key/audible signal light
microtap
QND serial printer for qualitiy report
MPT integrated manual positioning XY-table
SSW customer-specific software for handling actuations (4)
WinPCA TAP analysing PC software for comparison, evaluation of series of measurement and their storage
microtap/jobtap
Reliable tapping units for quality-orientated tapping respectively thread moulding M 1 to M 18, screw in of thread inserts(5), rethreading and postforming as well as checking already manufactured threads.
Thanks to the menu guided operation the machine parameters can be entered fast and uncomplicated. For each particular machining process the ideal rota-tion speeds, drilling depth as well as the minimum
and maximum tapping torque can be entered. If the machine leaves these parameters, the thread will be identified as defective. By means of an integrated piece counter an overview of already processed workpieces is provided everytime.
For analysis and control of the tapping processes the machine can be connected to a PC or optional to a log printer (5).
Tapp
ing
Mac
hine
s
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
4000
3600
3000
21602000
1000
BTB 18 FL
BS 25 FL
Not possibleLimit rangen (rpm)
Ø (mm)
6) Also available as BT 18 FL and BS 18 FL.
10 12 13
B II
5 6 9
35 40
Options
Packing/Delivery
5 9 10
B II
1 2 3
11 35 39
Options
Packing/Delivery
27 28 29
37
E V
6 12 14
32 33 35
Options
Packing/Delivery
19
BT 30 GLE
High performance tapping machine with leadscrew feed and pneumatic rapid feed for nonoperational spindle travel. Safety device against tool breakage.Double return speed dR. Blind hole control.Pole changing brake motor, forced air ventilated. Bottoming release. Floor cabinet.Maintenance device.Also available as BT 15 GLE.
BTB 18 FL(6)
Sturdy precision flow drilling machine. Intermediate table with adjustment via rack. Motor protection, Cross lever.
BS 25 FL
Powerful and precise column flow drilling Machine with big application area. Table adjustable via rack and pinion, rotatable around column. Machine base without T-slots.Motor protection, Cross lever.
Tapping capacity M 5 - M 30
Threads per hour 800
Spindle MT 4
Operating stroke 90 mm
Rapid feed stroke max. 80 mm
Spindle to column 280 mm
Spindle to table 220 to 600 mm
Table surface 390 x 420 mm
Column diameter 120 mm
Total height max. 2,100 mm
Weight 370 kg
Pole changing brake motor 1.3/2.4 kW
BT 30 GLE 67098
5 rotation speeds 80 - 440 rpm
BT 30 GLE 67099
5 rotation speeds 160 - 880 rpm
Leadscrew 119
Leadscrew < 0.7 mm and/or left-hand threads 120
Column longer by 200 mm 14172
Spindle MT 2
Spindle travel 100 mm
Spindle to column 215 mm
Spindle to table to 360 mm
Spindle to base 560 mm
Table surface 350 x 290 mm
Column diameter 75 mm
Total height 1,050 mm
Weight 100 kg
Motor 2 kW
BTB 18 FL 67104
Stepless rotation speeds 400 - 3,600 rpm
Tapping unit including separately driven fan
33264
Spindle MT 3
Spindle travel 120 mm
Spindle to column 260 mm
Spindle to table 90 to 760 mm
Table surface 500 x 350 mm
Column diameter 110 mm
Total height 1,850 mm
Weight 260 kg
Motor 3 kW
BS 25 FL 61981
Stepless rotation speeds 240 - 2,160 rpm
Tapping unit including separately driven fan
33809
Column longer by 100 mm 26433
When ordering please indicate your desired rotation speeds range if several are mentionend in the catalogue.For pictured machines with special equipment additional prices are applied!
Tapp
ing
& F
low
Dri
lling
Mac
hine
s
M a d e i n G e r m a n y
20
Customer-Specific Special Solutions
Translation table
Translation table, position of index under
spindle centre of units, low-abrasive
recirculating ball bearing guide.
For BRK with 3 to 6 units.
Throat enlargement
Special design for enlargement of
usable throat between spindle
and column.
Price on request.
Rail units
Benchings BRK 3 to 6 with, on recirculating ball
bearing guides, laterally smooth-running
moveable units.
Clamping manually in operating position.
Applicable to drill long workpieces.
BRK for 3-sided machining
Rotary transfer machine UNIMAX 1 PV 12 with rotating axis
BRK for several spindles and multilateral machining
w w w . m a x i o n . d e
21
Out of our machine components
we offer special solutions relating
to your workpiece.
Customer-Specific Special Solutions
Rotary transfer machine Special purpose machine for multilateral machining
Benching with horizontal tapping unit Fully automated tapping
Automated drilling of sheet-metal parts left and right Automated flow drilling and thread moulding
354 5 25
Options
12 13 354 5 9
Options
Prices on request.Prices on request.
22 Coordinate Drilling Machines
Constant capacity in St 60 20 mm
Tapping capacity M 16
Spindle MT 3
Motor perfomance 0.8/1.5 KW
Spindle travel 125 mm
Distance spindle/table 60 to 320 mm
Spindle to column 260 mm
Table surface 600 x 240 mm
Maximal table load 75 kg
Traverse paths x = 340/y = 160 mm
Number of T-slots 3 pcs. DIN 650 12 mm
Rapid traverse speed (x/y-Achse) 6 m/min
Rapid traverse speed (z-Achse) 1.5 m/min
Positioning accuracy of table +/- 0.02 mm
Repeat accuracy of table +/- 0.01 mm
Automatic drill feed stepless within the range
30 - 400 mm/rpm
MAXBOMAT 3 AVG M00013
Stepless rotation speeds:
Range A 80 - 1,440 rpm
Range B 180 - 3,200 rpm
Quotations only on request with specified machining task.
MAXBOMAT 3 AVG
automatedMAXBOMAT 3 AVG – An all-purpose computerised coordinate drilling machine.Easy programming of cross table by using accusto-med Windows user interface, there is no need of CNC-knowledge. Predefined hole patterns like e.g. rows of holes, hole circles or breadboards are assuring short programming times.The profile rail-guided cross table is moved via servo motor and a backlash-free ballscrew with high accuracy and dynamics.
MAXBOMAT L
automatedFully automated drilling unit for drilling of bar stocks.Determination of zero point at end of bar via laser measurement (optional).Easy programming of rows of holes without any CNC-knowledge. Dialogue control assures a short programming time.
max. length of bars, x-direction x = 6 m
manual movement in Y y = possible up to 150 mm (optional)
The following MAXION table drilling machines can be installed as drilling units: BT 25, BT 25 AV, BT 35, BT 35 AV
Quotations only on request with specified machining task.
Programming Entered data is immediately apparent on the display.On the basis of only a few data for example the exact position of pitch circle drillings or specific hole patterns is calculated automatically and the progress of the machining is shown.
Once generated programmes can be saved to a data medium and be modified if necessary.
23
Drum-Stop Revolver-Stop
6 different drilling depths adjustable, mechanicalFor drilling machines 43552For tapping machines 67915(Only for installation sizes 18, 25 and UNIMAX 3 with special drill guard)
Drill Chucks
Machine Lamps
Drilling Heads
Revolving drilling heads Multi spindle heads(on request) (on request)
Compound tables
Feed units
Hydro-pneumatical feed unit for semi-automatic production drilling up to 12, 16 or 20mm drilling capacity. Stepless adjustable feed rates, optional also with final stop retardation and chip breakage control. Also possible for retrofitting of older machines.Working cycle: 1. rapid feed to workpiece 2. drilling with constant, stepless feed rate 3. rapid return to start position
Electrical Drill Guard
Protective device for covering the tool with electrical fuse protection equipped as standard.Drill guard is height adjustable for all drilling and tapping machines.
Key type drill chuck Self-cocking drill chuck Drill chuck taper
1 - 13 mm 14274 1 - 13 mm 14277 MK 1, MK 2, MK 3,
3 - 16 mm 14275 3 - 16 mm 19505 MK 4 and MK 5
Lamp LED-Lamp Spot lamp
230 V, max. 60 W 230/12 V, 3 W 230/12 V, 20 W
For BT 6 - 20 64059 (on request) HALOFLEX 34012
For BT 25 - BS 50 64058 WALDMANN 14270
MF-0 for BT 13 and UNIMAX 1 28261
Table surface 230 x 164 mm
Long/cross traverse 120/110 mm
Weight 16 kg
MF-2 for BT 6 and BT/BTB 18 15424
Table surface 430 x 240 mm
Long/cross traverse 240/160 mm
Weight 57 kg
MF-3 for BT/BS 18, BS 20, UNIMAX 2 and UNIMAX 3 15397
Table surface 600 x 240 mm
Long/cross traverse 350/160 mm
Weight 74 kg
MF-4 for BT/BS 35, BS 40, BS 50 and UNIMAX 4 15421
Table surface 800 x 240 mm
Long/cross traverse 470/245 mm
Weight 110 kg
6 longitudinal feeds available for MF 3 and MF 4
Technical data PV 12 PV 16 PV 20
max. spindle travel 78 mm (UNIMAX 1) 78 mm (BT 15/18/20) 120 mm (UNIMAX 3)
70 mm (BT 13) 100 mm (BS/BT 25)
max. feed rate 3,000 rpm 2,300 rpm 2,000 rpm
max. compound power at 5 bar 2,100 N 3,300 N 3,900 N
max. compound power at 6 bar 2,500 N 4,000 N 4,800 N
max. compound power at 7 bar 3,000 N 4,800 N 5,800 N
Repetition accuracy of the spindle 0.1 mm 0.1 mm 0.1 mm
Air consumption 1.2 l/pass 1.8 l/pass 3.0 l/pass
Options: Final stop retardation and chip breakage control. Foot switch to start feed.
Accessories
Machine vices
Plug-in locking handle and 1 kit clamping screws included. Jaw width x span opening:
MSP, Heavy Machine Vices
MSP 80, 80 x 80 mm, Weight 5 kg 22620
MSP 100, 100 x 90 mm, Weight 7 kg 22621
MSP 120, 120 x 115 mm, Weight 11,5 kg 22622
MSP 140, 140 x 155 mm, Weight 13,5 kg 22623
MSW, Angle Tightener
MSW 100, Angle tightener MSW 100 30971
MSD, Pneumativ Vices
MSD 100, Pneumatic vice MSD 100 36888
MSD 140, Pneumatic vice MSD 140 45757
23 24
Drilling depth with fine adjustment1
Fine feed8
Flanged quill14
Chip tray25
Foot impulse switch28 Two-hand start29
Lead screw32
Swivelling table
310 x 220 mm, with protractor scale and height adjustment via rack.(only for BTB/BS 18)
3 Tapping unit4
Digital display
Display for rotation speeds for ST-machineIncluding drilling depth indicatorMachines with automatic feed, programmable
5 Motorised height adjustment
Including safety stop in finalpositions, manual clamping
6
Security against torsion
for drilling tables or headstocks standard accuracy ± 0.1 mm at the spindle
12
Die holder
For dies MT 2 or MT 3, correspondent die holder necessary!
37
Tap holder
GSIP-0 M 3 to M 10, GSIP-1 M 8 to M 18GSIP-2 M 14 to M 30
33
Electric cooling unit
With provided 20 liter coolant tank, including pump, pipe connections, flexible outlet and shut-off valve
7
Cooling unit
With T-slots in baseplate for BS 35, BS 40, BS 50 and UNIMAX 4 (controlled)
16
PV feed units
Drilling capacity 12, 16 or 20 mm
9 Compound table
For dimensions and allocation see page “Accessories”
10
TTV
Height adjustment on front side
13MKF Quick clamping device
MKF 65/65 Z, MKF 75 Z
11
Floor units
Without door:BT 13/UNIMAX 1 (225 x 380 x 660 mm, 15 kg)With door:UNIMAX 2T (345 x 602 x 730 mm, 45 kg)BT 25/35 (400 x 690 x 720 mm, 65 kg)BT 6/18/15 (300 x 470 x 760 mm, 40 kg)ECOMAX 14* (600 x 700 x 840 mm, 60 kg)
2
Milling chuck taper BF 16
Clamping range 2 - 16 mm
20
Milling cutter chuck HW 3-25
With 16 collet chucks 4 - 25 mm in handy box
24Milling cutter chuck ER 32
Clamping range 3 - 20 mm
22
Digital display table axes
for both table axes
26
Milling package
only for UNIMAX 3, see page 10
41
3 feeds AV
for BT 25 F, BT 35 F
36Minimum quantity lubrication system
Including 1.2 l storage tank and activation, unmounted, detached as a module for retrofitting machines.
35
Fine adj. cam for tapping depth27
Collet chuck BF 16
Clamping range 2 - 16 mm
21
Collet chuck ER 32
Clamping range 3 - 20 mm
23
Options
*) without illustration
M a d e i n G e r m a n y
25
Feel free to ask for spare parts for your
MAXION and IXION machines.
We maintain for you an extensive stock of
spare parts.
+49 3647 4106-18
Service & Delivery
Service stations
Scheidt
Maschinen- und Eisen GmbH & Co. KG
Helmholtzstraße 13/14 & 19
D-10587 Berlin
? +49 30 39041218
) +49 30 3938872
Michael Schlicker
Bahnhofstraße 72a
D-42551 Velbert
? +49 201 6162-997
) +49 201 6162-998
Zimmer Maschinen GmbH & Co. KG
Planckstraße 5
D-71691 Freiberg/Neckar
? +49 7141 2774-0
) +49 7141 2774-44
Landt, Technische Dienste
Hegholt 56
D-22179 Hamburg
? +49 40 386615-28
P +49 176 53078383
MAXION Jänsch & Ortlepp GmbH
Rosa-Luxemburg-Str. 5
D-07381 Pößneck
? +49 3647 4106-0
) +49 3647 415800
Shipment & Delivery
Shipping standards
Delivery conditions and warranty
We are delivering according to VDW S02, latest edition, and to our standard business conditions.
Non-obligatory guide prices, VAT and packing excluded. Delivery ex works.
Warranty period two years, apart from wearing parts. Changes and errors excepted.
Freight chart
3
1
0
9
87
6
5
4
2
Delivery classes I II III IV V VI
Delivery region postal codes up to 100 kg up to 200 kg up to 300 kg up to 400 kg up to 500 kg up to 700 kg
0/9 A 1 A 2 A 3 A 4 A 5 A 6
1/3/8 B 1 B 2 B 3 B 4 B 5 B 6
5/6/7 C 1 C 2 C 3 C 4 C 5 C 6
2/4 D 1 D 2 D 3 D 4 D 5 D 6
CE Following EU-Machinery Directive
Colour Machine grey RAL 7037, machine cover blue RAL 5012, special colour against additional charge
Electricity 230/400 V 50 Hz 3-/5- conductor net. Special electrical system against additional charge.
All machines with capacity up to 3 kW are delivered with a 3 m connecting cable and CE-plug-5 pole/shock-proof plug.
Drill guard All machines are serially equipped with a drill guard.
Safety Machines with staged feeds are serially equipped with automatic spindle-stop and restart protection.
Distribution of delivery classes, for regions
(see freight chart)
Service stationsA
A
A
B
D
D
C
C
E
E
B
Subject to alterations.
Version 08/2014M a d e i n G e r m a n y
Quality by MAXIO
N
MADE IN GERMANY
Neustadt
Kolba
Läusigsberg
Kurzackerstraße
Rosa-Luxemburg-Straße
Neustädter Straße
Pößneck
Pößneck
281
281
A9E51E49
towardsLeipzig, Erfurt
exitTriptis
towardsNuremberg
Pößneck/Thüringen
Jänsch & Ortlepp GmbH
Rosa-Luxemburg-Str. 5
D-07381 Pößneck/Thüringen
Phone +49 3647 4106-0
Fax +49 3647 415800
www.maxion.de
Sales
Phone +49 3647 4106-12 Sales Manager
Phone +49 3647 4106-16 Sales
Phone +49 3647 4106-34 Sales
QN -
09.20
14 -
quat
trone
t.de
UNIMAX 1 TAP
UNIMAX 4 Cam stop
Pneumatic Feed