(Catalogue GPA EN - V4- en cours [Mode de compatibilité])

GPA ACCESSORIES

Version april 2012

Index

•Tanks kit…………………............………………………………………….3

•Power pack…………….………………………………………………….. 5

•Pumps kit……………….………………………………………………….. 6

•Underride protection………………………………………………………. 13

•Stabilizers……………………….…………………………………………..17

•Subframe extension………………………….………..………………….. 19

•Working lights…………….……………………………………………….. 20

•Accessories for SAM ………………………………………………. …… 21

• Sideguards ……………………………………. 22

• Mounting kits ……………..…………………... 26

• ALU mudguards …………………………..….. 34

• Plastic mudguards…..…………………....…...36

• Fixations brackets for accessories …...…….. 37

• Support for rear lights…..………………..........39

• Extinguisher and working light supports.........40

• Tank supports…..………………………....…...41

• Tool box support….…..…………………....…..42

• Netbox and support...…..……..………....…...43

• Side light suports..…..…………………....…...44

GUIMA PALFINGER –V4 – April 2012

This guideline helps you to select the most suitable tank and pump according to the type and lifting capacity of your equipment.

Capacity CITY 2 3 4 5 7 9 10 12

C - PElectro Pompe

CASAP 11 CASAP 11 CASAP 20 LEDUC 25 LEDUC 25 LEDUC 25 LEDUC 40

T LEDUC 25 LEDUC 25 LEDUC 40

S LEDUC 25 LEDUC 40LEDUC 50

REXROTH 45

Capacity 13 15 16 18 20 22 24 26 30

G - P LEDUC 50 LEDUC 63/65 REXROTH 63

LEDUC 63/65 REXROTH 63

LEDUC 80 REXROTH 80

LEDUC 108 REXROTH

107

T LEDUC 50 LEDUC 63/65 REXROTH 63

LEDUC 63/65

REXROTH 63


LEDUC 80 REXROTH 80

LEDUC 80 REXROTH 80

LEDUC 108 REXROTH

107

LEDUC 108 REXROTH

107

SLEDUC 63/65 REXROTH 63


LEDUC 80 REXROTH 80

SELECTION GUIDELINE FOR THE PUMP KIT

Capacity 2t - 3t 4t 5t - 7t 9t -13t 15t - 17t 18t - 24t 25 t - 30 Option Option Option

Minimum volume of the

tank11L 19L 30L 50L 75L 100L 140L 120L Vertical 160L Vertical 200L

SELECTION GUIDELINE FOR THE TANK KIT

2

Pump kit and tank kit

Selection guideline


Choice of main hyd. valve:SDS150 for oil flow up to 80L/minSDS180 for 100L/min flow or higherAt 80L/min, the speed increase is around 5% between SDS180 and SDS150

PTO installation:Take care about the PTO acceptable torque in the pump choiceIf possible choose a PTO ratio near to1 � 80cm3/rot pump give 80L/minIn case of different PTO ratio, the pump size needs to be adjusted

Rear engine pump:In case of fixed pump a bypass valve must be added to stop flow (Switch is already in cab when the pump is delivered with the truck – Volvo mounting)PTO ratio = 1 by defaultMax PTO speed shouldn’t exceed 150rpm (the PTO ratio needs to be integrated in the rpm)

Tanks kit

Kit Tank on the wheelbase

Dimensions

3

Composition

Rep 1 Tank

Rep 2-3-5 Set of couplings

Rep 4 Valve

Rep 6 Hose clamp

Rep 10 Return valve

Rep 13 Collars

Filter 10 micron

Pipes are not supplied in the kit


Weight A B C Coupling Rep 10(kg) (mm) (mm) (mm) (section)

Tank kit 11L ( <=4t) M2371091 6 320 350 230 16STank kit 19L ( <=4t) M2371090 7 400 410 250 16STank kit 30L ( <=4t) M2371092 21 400 630 420 16STank kit 30L (5 to 12t) M2371058 22 410 630 420 22LTank kit 50L (>=5t) M2371057 30 410 580 580 22LTank kit 75L (>=5t) M2371056 37 590 580 550 28LTank kit 100L (>=5t) M2371055 43 560 810 480 28LTank kit 140L (>=13t) M2371204 61 510 710 680 28LTank kit 200L (>=13t) M2371094 69 700 700 670 28L

Designation References

See p.41

Tanks Kit

Vertical Tank Kit

The lack of free place between the axles of the truck is more and more frequent. We have developed avertical tank to be mounted at the rear of the cabin. It is delivered with mounting plates.

Dimensions

4

Mounting fixation

Weight A B C X Y Coupling Rep 10(kg) (mm) (mm) (mm) (mm) (mm) (section)

Tank kit 120L (>13t) with mounting plate M2371731 65 890 550 300 840 234 28L

Designation Reference

Accessories

Suction Hose

To make the hydraulic connection between the tank and the pump, we can supply the suction hose in rolls.

Designation Reference Unit length DiameterHose CARBOPRESS 1" M63030897 25 m 25/35Hose CARBOPRESS 2" M63030898 20 m 50/65


Composition of the pump kit: Pump, pressure and return couplings

Power Pack

Dimensions

Drawing

Motor C.C 12V 1.5kW ventilatedGear pump 1.6cc/trTank capacity 6L

5

Weightaspiration pression (kg)

Power pack 12V M2375128 16S 12S 14Power pack 24V M2375129 16S 12S 14

Designation ReferenceCouplings


CASAPPA pumps are especially designed for applications onutility trucks.The main advantages:• High performance level even with a slow speed• Low noise level• Modular design• Direct mounting on the PTO• Special sealings system reducing leakage risks


CASAPPA Pump Kit

Dimensions

Single flow

6

Displacement Pump weightvolume cc/rot suction pressure kg

Pump kit CASAPPA 20 11L M2371425 11,2 1" 1/2" 5,5Pump kit CASAPPA 20 16L M2371426 16,8 1" 1/2" 6Pump kit CASAPPA 20 20L M2371427 21 1" 1/2" 6,5

DesignationCouplings

Reference


The LEDUC PA and PAC pump kits are manufactured to resist even with used oil and thus optimal for hard working conditions.Concerning the hydraulic sealings, this range hasbeen also equipped with the newest technologiesavailable.• Easy handling• Ideal for difficult demands– Pressure peaks– Slightly degraded fluids– Most difficult working conditions• Double shaft sealing• Economic solution for twin flow requirements• Arbitrary rotating direction

Single and twin flow

LEDUC Pump Kit: PA and PAC series

7

Dimensions


Pump kit LEDUC PA12L 281 94,9 103,3 62 73,2 54 98 - -Pump kit LEDUC PA18L 281 94,9 103,3 62 73,2 54 98 - -Pump kit LEDUC PA25L 315 102 126 47 78 65 107 98 -Pump kit LEDUC PA32L 315 102 126 47 78 65 107 98 -Pump kit LEDUC PA40L 315 102 126 47 78 65 107 98 -Pump kit LEDUC PA50L 315 102 126 47 78 65 107 98 -Pump kit LEDUC PAC65L 299 102,5 112,8 63 78 65 107 98 105Pump kit LEDUC PAC80L 302,5 102,5 116,3 63 78 65 107 98 105Pump kit LEDUC PA2x40L 345 123 138 69 90 69 124 112 120Pump kit LEDUC PA2x57L 345 123 138 69 90 69 124 112 120

Type A B C H ID - D' E F G

LEDUC Pump Kit: PA and PAC series

Single and twin flow

8



Pump kit LEDUC PA12L M2371424 12 1" 3/4" 12,5Pump kit LEDUC PA18L M2371175 18 1" 3/4" 12,5Pump kit LEDUC PA25L M2371172 28 2" 3/4" 17Pump kit LEDUC PA32L M2371234 34 2" 3/4" 17Pump kit LEDUC PA40L M2371233 43 2" 3/4" 17Pump kit LEDUC PA50L M2371173 50 2" 3/4" 17Pump kit LEDUC PA50L (>13t) M2371239 50 2" 3/4" 17Pump kit LEDUC PAC65L M2371174 68 2" 3/4" 18,5Pump kit LEDUC PAC65L (>13t) M2371101 68 2" 3/4" 19Pump kit LEDUC PAC80L M2371102 78 2" 3/4" 19Pump kit LEDUC PA2x40L M2371236 2x39 2" 3/4" 19Pump kit LEDUC PA2x57L M2371200 2x57 2" 3/4" 20

DesignationCouplngs

Reference


The X-range pumps are designed for the most severe working conditions. The exceedingly compact design combined with technologies shows that this pump range is ideal for narrow places and high revolution speeds, especially appropriate with conventional secondary drives.• Use of high-class, mechanically resistant materials• Compact design at max. displacement volume• High pump drive at high pressure demands• 7 piston technologies• Optimized synchonising between disc and drum• Change of rotating direction by simply changing a fitting• Reinforced sealings• Reduced noise levels• Higher working pressure• Easy handling• Long service life

LEDUC Pump Kit: XP SerieSingle flow

9

Dimensions


Pump kit LEDUC XP50L 214,4 195,6 92 118,9 85,7 108 54Pump kit LEDUC XP63L 214,4 195,6 92 118,9 85,7 108 54Pump kit LEDUC XP80L 241,7 220,9 103,5 133,3 97,4 123 60Pump kit LEDUCXP108L 241,7 222,5 104,8 133,3 97,4 123 60

HD E FType A B C

LEDUC Pump Kit: XP Serie

Single flow

10



Pump Kit LEDUC XP50L M2371733 50 2" 3/4" 12Pump Kit LEDUC XP63L M2371732 63 2" 3/4" 12Pump Kit LEDUC XP80L M2371310 80 2" 1" 18Pump Kit LEDUCXP108L M2371305 108 2" 1" 18


Reference


Pump dimensions with By-pass

Pump kit LEDUC XP50L 307,1 240,4 220 147,1 129,7 112,5 3/4" 54Pump kit LEDUC XP63L 307,1 240,4 220 147,1 129,7 112,5 3/4" 54Pump kit LEDUC XP80L 334 269 246,7 157,8 143,9 124,8 1" 60 123,5Pump kit LEDUCXP108L 334 269 246,7 157,8 143,9 124,8 1" 60 123,5

JType A B C HD E F G

LEDUC Pump Kit: XP Serie

By-pass valve

11

For certain X-pump applications with a continuous, not disconnectable secondary drive number existing (e.g. motor-camshaft drive), there is a special by-pass valve, which is mounted directly at the end of the pump body. This allows a continuous pumping rotation speed with the following advantages:• No heat development within the hydraulic circuit• No negative detraction of the pumps‘ service life• No further necessary modifications at the hydraulic system of the vehicleThe by-pass valve is a shiftable solenoid valve (24 volt). Without flow, the by-pass valve is open and connects the pressure side with the suction side. Charged with electric flow, the by-pass valve is closed and operating pressure is built up.

By-pass 24V M63060940 For LEDUC pump XP12 to XP63By-pass 24V M63060941 For LEDUC pump XP80 to XP130

Designation Reference Pump Type


• The fixed pump with axial conical piston driving ge ar in bent axis design with special features and dimensions for the use in commercial vehicles• The volume flow is proportional to the drive and the displacement volume• Large angle machine with 40° tilt angle, i.e. high performance density, small dimensions, optimal degrees of efficiency, economic conception• Easy change of rotational direction• Self-aspirating, for open circuit• No leakage pipe necessary• Flange and shaft for direct mounting on additional drive of trucks• Optimized noise

Pump Kit REXROTH: KFA Serie

Single flow


12

Pump kit REXROTH 45L G3/4 223 210 194 88 78 58 63 89 102 119 108 103 98 58,8 108 - G1 108Pump kit REXROTH 63L G3/4 232 219 203 88 78 58 63 96 110 126 108 103 98 64 108 - G1 108Pump kit REXROTH 80L G1 261 245 227 102 92 67,5 62,5 105 120 140 114 107 96 69 117 124 G1 1/4 121

Pump kit REXROTH 107L G1 272 256 238 102 92 73,5 68,5 114 129 149 120 107 96 77 129 - G1 1/4 133

K L M N S TO P Q RJType B(A) C D IE F G H


Pump kit Rexroth KFA 45L M2371699 45 1" angled 45° Ø50 3/4" 8Pump kit Rexroth KFA 63L M2371700 63 1" angled 45° Ø50 3/4" 9Pump kit Rexroth KFA 80L M2371701 80 1"1/4 angled 45° Ø50 3/4" 11,6Pump kit Rexroth KFA 107L M2371702 106 1"1/4 angled 45° Ø50 3/4" 14,5


Reference

GUIMA PALFINGER – V4 – April 2012

URP choice

13GUIMA PALFINGER – V4 – April 2012

Trucks GVWGVW 13-44 tons

URP T13-44 XL M2093099

URP T13-44 L M2093106


Designation Type/Model Hoo

klift

Tip

per

Ski

ploa

der

Ski

ploa

der

on c

radd

le

Fin

ishe

r

Veh

icle

with

rol

ler

stab

ilize

r

Pla

ce f

or t

owin

g ho

ok

GVW 13-44 tons

URP T13-44 XL M2093099 Hydraulic Télescopic yes no no yes no yes no

URP T13-44 L M2093106 Hydraulic Télescopic yes no no yes no yes no

URP T13-44 M M2093107 Hydraulic Télescopic yes yes no yes no yes no

URP T13-44 S M2093101 Hydraulic Télescopic yes yes no yes no yes no

Référence

Type / Model of URP

- Hydraulical or Manual

- Fixed or Articuled or Télescopic

Check the rear overhang depending of URP homologation

GVW 13-44 tons

Compatibility with customer application

Underride Protection

CE Homologated

. Homologated following the CE directive 2006/20/CEin application since march 2010.

• Delivered ready to be mounted, screwed andpainted, it makes mounting and service muchquicker and easier.

• Easy connection with GUIMA PALFINGERequipments

• Wide range fulfilling all applications

SELECT GUIDELINES

1

2

3

4


CE Homologated

14

Type/Model Ho

okl

ift

Tip

pe

r

Ski

plo

ad

er

Ski

plo

ad

er

on

cra

dd

le

Fin

ish

er

Ve

hic

le w

ith r

olle

r st

ab

ilize

r

Pla

ce fo

r to

win

g h

oo

kGVW 13-44 tons KTLURP T13-44 XL M2093099 Hydraulic Télescopic yes no no yes no yes no screw ed RAL 9011 360 153

URP T13-44 L M2093106 Hydraulic Télescopic yes no no yes no yes no screw ed RAL 9011 360 150

URP T13-44 M M2093107 Hydraulic Télescopic yes yes no yes no yes no screw ed RAL 9011 360 146

URP T13-44 S M2093101 Hydraulic Télescopic yes yes no yes no yes no screw ed RAL 9011 360 137

URP TM13-44 XL M2093126 Manual Télescopic yes no no yes no yes no screw ed RAL 9011 360 137

URP TM13-44 L M2093127 Manual Télescopic yes no no yes no yes no screw ed RAL 9011 360 134

URP TM13-44 M M2093128 Manual Télescopic yes yes no yes no yes no screw ed RAL 9011 360 130

URP TM13-44 S M2093129 Manual Télescopic yes yes no yes no yes no screw ed RAL 9011 360 121

URP A 13-44 M2093117 Hydraulic Articuled yes no no no no yes no screw ed RAL 9011 338 208

URP F13-44 M2093119 Fixed yes no yes no no yes no screw ed RAL 9011 314 95

GVW 7-13 tons

URP F9,5-13 M2093121 Fixed 9,5 to 13 T yes no no no no yes no w elded Primer 381 62

URP FT7-13 M2093124 Manual Fixed Télescopic yes no no no no no no screw ed Primer 377 58

GVW 3,5-7 tons

URP FT3,5-7 M2093125 Manual Fixed Télescopic yes no no no no no no screw ed Primer 378 42

Wei

ght

Type

of m

ount

ing

Fini

tion

Designation Référence Xb

max

i hom

olog

ated

acc

ordi

ng to

200

6/20

/CE

Applications

URP selection table

1 2

3

4


S

URP A13-44

GVW 13-44 tons


URP - Fixed

URP F13-44


CE Homologated

URP T13-44 – Hydraulic telescopic

URP TM13-44 – Manual telescopic

URP A 13-44 – Hydraulic articulated

URP T13-44 L

Length. HT 1053mm

URP T13-44 XL

Length. HT 1253mm

URP T13-44 M

Length. HT 853mm

URP T13-44 S

Length HT 553mm

S

URP TM13-44 L

Length. HT 1053mm

URP TM13-44 XL

Length. HT 1253mm

URP TM13-44 M

Length. HT 853mm

URP TM13-44 S

Length HT 553mm

To mount this underride protection with a new hookl oader , do not forget to select « Hydraulic predispo sition for URP »(Option nr 6707) in your hookloader order.

Composition: KTL Painted , Mounting kit,

To mount this underride protection with a new hookl oader , do not forget to select « predisposition for mechanical Telescopic URP »(Option nr 6712) in your hookolader order.

Composition: KTL Painted, Mounting kit,


CE Homologated

16

URP F9.5-13

URP FT – Fixed Télescopic

URP FT7-13

URP FT3.5-7

GVW 3,5-7 tons

GVW 7-13 tons

URP F - Fixed

URP FT – Fixed Télescopic


Stabilizers

GUIMA PALFINGER has developped a complete range ofstabilizers to ensure perfect stability during loading/unloadingand during the tipping. With our load repartition calculation, wecan help you to choose the most suitable stabilizer.

• Quick mounting

• Easy connection with GUIMA PALFINGER equipments

• Wide range adapted to every application

The axle stabilizers kits are available in two different models,short and long.

To connect hydraulically the axle stabilizers to yourequipment, you have two different solutions :

-Through a dedicated hydraulic line. The axle stabilizer isthen controlled by the cab control

Dimensions

17

A mini A maxi Weight (mm) (mm) (kg)

Axle stabilizers kit - Short version M2371437 235 343 23,6Axle stabilizers kit - Long version M2371445 285 443 25,6


Mounting application : only on 6x4 / 6x6 / 8x4 / 8x8 trucks

Axle stabilizers kit - Short version � RVI – VOLVO – MAN only with MAN code option 262 CM forrear brake

Axle stabilizers kit - Long version � MERCEDES – SCANIA – IVECO – DAF – MAN on standardversion

Other on request

To mount this axle stabilizer with a new hookloade r , do not forget to select « predisposition for axl e stabilizers » (4401 to 4403)) in your hookloader order.

Axle Stabilizers


This kit is available in 3 different versions:

- Small tonnage (1 cylinder) : For equipments with liftingcapacity below or under 13 tons

- Large (2 cylinders) : For equipments with lifting capacityabove 13 tons. It is especially adapted to be mounted witharticulated URP.

- Standard (2 cylinders) : For equipments with lifting capacityabove 13 tons.

Dimensions

Stabilizers

18

Rear Roller Stabilizers

A B C D Weight(mm) (mm) (mm) (mm) (kg)

Rear roller stabilizer small tonnage <=13T M2371438 900 410 846 256 90Large rear roller stabilizer (1150mm) >=13T M2085021 1460 1150 916 268 215Standard rear roller stabilizer (850mm) >=13T M2085023 1160 850 916 268 185


To mount these rollers stabilizers with a new hoo klift, do not forget to select « predisposition for rear roller stabilizer » (4400) in your hookloader order.


Subframe Extension

To make easier the mounting of the different equipmentsplaced behind the cabin (crane, tank, Palcover …), wecan supply an extension of our subframe

This kit is composed of 1 extension of 2m painted inprimer, chosen following the type of your equipment.

19

Weight(kg)

Subframe extension M5328662 T05 - T07 20Subframe extension M5331248 T07S - T08 -T10 25Subframe extension M5328677 T13 - T15 - P14 38Subframe extension M5328665 T18 - P17 - S17 - T20 (L<=6000) 40Subframe extension M5328666 T20 (L>=6150) - T22 - T24 - P20 - S21 52Subframe extension M5328667 T26 - T30 - P24 56Subframe extension M5328670 P05 - P07 - S07 23Subframe extension M5328671 P09 - S09 28Subframe extension M5328672 P12 30Subframe extension M5328677 T17 SCAN 38Subframe extension M5328678 T20 SCAN - T22 SCAN 49

Designation References For equipment


Working Lights

20

Working light

Working light 24V M65030222Working light 12V M65030303Working light 24V ADR M65030500


2 models availables:

ADR for transportation of dangerous goods by road

Standard 12Vand 24V


21

ACCESSORIES for SAM MOUNTING

AVANTAGES OF SAM Secured Advanced Mounting


● Mounting without painting, welding, or drilling

● Standardization of mounting

● Chassis mountings according to PALFINGER instructions & truck producers recommendations

● Interchangeability of the accessories

Sideguards

The GUIMA PALFINGER sideguards comply to CEdirective 89/297/CEE. They are especially designed tobe easy to install and the modular design helps youto adapt it to every situation.

• Easy to mount

• Possibility to articulate one bar for an easier accessto the accessories placed between the axles(toolbox,…).

• The bars are adjustable in height and width. Youcan add an extension or compose yourself your ownkit.

22

FIXED SIDEGUARDS



Sideguards

Composition: Boltable mounting plates, support, aluminium bars and plastic tip, screws

Sideguards

24

Kit 4 fixed supports + 4 alu. profiles 3,5M M9000400 4 4 3,5MKit 4 fixed supports + 2 alu. profiles 5M M9000401 4 2 5MKit 6 fixed supports + 4 alu. profiles 5M M9000402 6 4 5MKit 4 fixed supports + 2 alu. profiles 3,5M M9000403 4 2 3,5M


3901< F < 5000F < 3900F > 5000

Nr

of s

uppo

rts

Nr

of b

arre

srof

iles

Pro

file

leng

th

GVW < 8 Tons

4x-- 6x-- 8x--

Distance F for 4x- and 6x- trucks Distance F for 8x- trucks


You can also compose your own kit

Kit 1 support + accessories M9000404

Composition : Fastener, angled support for extension,plastic tips

The aluminium profiles are not supplied

Sideguards

25

Articulation kit for sidegards M9000405

Kit of 2 hinges for 1 side

This kit allows you to articulate one bar of your sideguardfor an easy access of the different equipments placedbehind the sideguard.

These aluminium profiles are not supplied

Aluminium profile

Ref.: M62010651 -> (L3500mm)

Ref.: M62010652 -> (L5000mm )

Angled bracket kit for extension

Ref.: M9000425

Fixation bracket kit

Ref.: M9000423 left

Ref : M9000500 right

Rear cap

Ref.: M62010616

Angle profile

Ref.: M62010615 �� (L 100)

Ref.: M62010639 �� (L 3030 to cut on request)

Designation ReferenceKit 1 single support + accessories M9000404Articulation kit for side protection M9000405Fixation bracket kit - left M9000423Fixation bracket kit - right M9000500Angled bracket kit M9000424Angled bracket kit for extension M9000425Aluminium profile L3500 M62010651Aluminium profile L5000 M62010652Angle profile L 100 M62010615Rear cap M62010616Angle profile L 3030 to cut M62010639

Angled bracket kit

Ref.: M9000424


Mounting Kits – POP (Palfinger Origin Protection)

26

The new mounting brackets generation POP and SAM are designed for following trucks manufacturers ranges:

KERAX – PREMIUM – PREMIUM LANDER

FMX – FH – FM (4x4 and 4x2 excluded)

ACTROS – AXOR (4x4 excluded)

TGA – TGS – TGX (4x4 exclus)

And concerns only the following Palift ranges :

Telescopic T13 – T15 – T18 – T20 – T22 – T24 – T26 – T30

Telescopic A T13A – T15A – T18A – T20A – T22A – T24A – T26A

Power P14 – P17 – P20 – P24

Power A P14A – P17A – P20A – P24A

Synchron S17 – S21



Kit for RENAULT trucks

27

Designation ReferenceRENAULT basic mounting kit M9000446Additionnal high bracket RENAULT-VOLVO M9000436Blocking RENAULT-VOLVO T13/15-P14 M9000461Blocking RENAULT-VOLVO T18/24- P17/20- S17/21 M9000435Additionnal low bracket RENAULT-VOLVO M9000432Additionnal flexible bracket RENAULT-VOLVO M9000456Blocking RENAULT-VOLVO T26/30-P24 M9000462Nut M14 - per 100 M9000463Screw M14X40 - per 50 M9000464Screw M14X50 - per 50 M9000465

Palift lengthM9000436

Additionnal high bracket

M9000464 Screw M14x40

Box of 50

M9000465 Screw M14x50

Box of 50

M9000463 Nut M14

Box of 100

[ 0 ; 5400 ] 0 1 1 1[ 5400 ; 6250 ] 1 2 1 2[ 6300 ; 6760 ] 2 2 1 2

Additional high bracket and screws has to be ordered in following cases


28

Kit for VOLVO trucks 6x2 – 6x4


Designation ReferenceVOLVO 6x2 - 6x4 basic mounting kit M9000446Additionnal high bracket RENAULT-VOLVO M9000436Blocking RENAULT-VOLVO T13/15-P14 M9000461Blocking RENAULT-VOLVO T18/24- P17/20- S17/21 M9000435Additionnal low bracket RENAULT-VOLVO M9000432Additionnal flexible bracket RENAULT-VOLVO M9000456Blocking RENAULT-VOLVO T26/30-P24 M9000462Nut M14 - per 100 M9000463Screw M14X40 - per 50 M9000464Screw M14X50 - per 50 M9000465



M9000464 Screw M14x40

Box of 50

M9000465 Screw M14x50

Box of 50

M9000463 Nut M14

Box of 100

[ 0 ; 5400 ] 0 1 1 1[ 5400 ; 6250 ] 1 2 1 2[ 6300 ; 6760 ] 2 2 1 2



Kit for MERCEDES trucks


Designation ReferenceMERCEDES basic mounting kit M9000460Blocking MERCEDES T13/15-P14 M9000467Blocking MERCEDES T18/24- P17/20- S17/21 M9000443Blocking MERCEDES T26/30-P24 M9000468Additionnal high bracket MERCEDES M9000439Nut M14 - per 100 M9000463Screw M14X40 - per 50 M9000464Screw M14X50 - per 50 M9000465



M9000464 Screw M14x40

Box of 50

M9000465 Screw M14x50

Box of 50

M9000463 Nut M14

Box of 100

[ 0 ; 5400 ] 0 1 1 1[ 5400 ; 6250 ] 1 2 1 2[ 6300 ; 6760 ] 2 2 1 2



Kit for MAN trucks


Designation ReferenceMAN basic mounting kit M9000455Blocking MAN T13/15-P14 M9000469Blocking MAN T18/24- P17/20- S17/21 M9000453Blocking MAN T26/30-P24 M9000470Additionnal high bracket MAN M9000449Nut M14 - per 100 M9000463Screw M14X40 - per 50 M9000464Screw M14X50 - per 50 M9000465



M9000464 Screw M14x40

Box of 50

M9000465 Screw M14x50

Box of 50

M9000463 Nut M14

Box of 100

[ 0 ; 5400 ] 0 1 1 1[ 5400 ; 6250 ] 1 2 1 2[ 6300 ; 6760 ] 2 2 1 2


GUIMA PALFINGER – V4 – April 2012 30

Kit for IVECO trucks

Primer painted mounting kits with by welding adjustable vertical & horizontal brackets to be screwed on the trucks chassis and the subframe.

Mounting Kits


Designation ReferenceIVECO basic mounting kit M9000473Blocking IVECO T13/15-P14 M9000371Blocking IVECO T18/24- P17/20- S17/21 M9000357Blocking IVECO T26/30-P24 M9000364Additionnal bracket IVECO M9000342Screw M14X40 - per 50 M9000464Screw M14X50 - per 50 M9000465Nut M14 - par 100 M9000463


Palift lengthM9000342 Additionnal

bracket

M9000464 Screw M14x40

Box of 50

M9000465 Screw M14x50

Box of 50

M9000463 Nut M14

Box of 100

[ 0 ; 5400 ] 0 1 1 1[ 5400 ; 6250 ] 1 2 1 2[ 6300 ; 6760 ] 2 2 1 2

31

KIT for SCANIA trucks

Mounting Kits

32

Designation ReferenceSCANIA basic mountingkit M9000474Blocking SCANIA T13/15-P14 M9000372Blocking SCANIA T18/24- P17/20- S17/21 M9000358Blocking SCANIA T26/30-P24 M9000365Additionnal bracket SCANIA M9000345Screw M14X40 - per 50 M9000464Screw M14X50 - per 50 M9000465Nut M14 - per 100 M9000463


bracket

M9000464 Screw M14x40

Box of 50

M9000465 Screw M14x50

Box of 50

M9000463 Nut M14

Box of 100

[ 0 ; 5400 ] 0 1 1 1[ 5400 ; 6250 ] 1 2 1 2[ 6300 ; 6760 ] 2 2 1 2



Kit for DAF trucks

Mounting Kits

33

Designation ReferenceDAF basic mounting kit M9000475Blocking DAF T13/15-P14 M9000373Blocking DAF T18/24- P17/20- S17/21 M9000359Blocking DAF T26/30-P24 M9000366Additionnal bracket DAF M9000334Screw M16x50 - per 50 M9000505Screw M16x60 per 50 M9000506Nut M16 - per 100 M9000507


bracket

M9000505 Screw M16x50

Box of 50

M9000506 Screw M16x60

Box of 50

M9000507 Nut M16

Box of 100

[ 0 ; 5400 ] 0 1 1 1[ 5400 ; 6250 ] 1 2 1 2[ 6300 ; 6760 ] 2 2 1 2



34

Aluminium Mudguards

Kit composition :

- 2 ALU mudguards

- mudguard support tubes

- Rings, ALU brackets, screws

Designation ReferenceWidth (mm)

Radius (mm)

Length (mm)

Kit 2 axles ALU Mudguards M9000457 650 650 2700Kit 1 axle ALU Mudguards M9000477 650 650 1280


35

Aluminium Mudguards


KIT support tube for aluminium mudguard M9000501 650


Kit support tubes for aluminium mudguard

Aluminium Mudguard


Length (mm)

2 Axles aluminium mudguard M62010621 650 27001 Axle aluminium mudguard M62010622 650 1280

36

Plastic Mudguards


Kit support tubes for plastic mudguard

Plastic Mudguard


KIT support tube for plastic mudguard M9000502 650


Length (mm)

2 Axles plastic mudguard M62010409 650 27001 Axle plastic mudguard M62010179 650 1280

37

Fixations Brackets for Accessories

Kit fixation brackets for 2 axles mudguard

Kit fixation brackets for 1 axle mudguard

For tube Ø 42 mm

Designation ReferenceKit fixation brackets for 1 axle mudguard M9800213


Designation ReferenceLeft fixation bracket M9000503Right fixation bracket M9000504

Designation ReferenceKit fixation brackets for 2 axles mudguard M9800214

Fixation bracket

Content : 3 left supports 3 right supports6 plates

12 screws24 shim rings 12 nuts

Content : 2 left supports 2 right supports4 plates 8 screws16 shim rings 8 nuts


Gripper Clamp

Gripper clamp

This specific fixation allows you to screw the differentchassis accessories (mudguards, side guards, toolbox …)on the subframe (maximum diameter of the tube is 42mm)

Designation Reference Palift modelsGRIPPER CLAMP 170mm M9000381 T13/T15-P14GRIPPER CLAMP 190mm M9000382 T18/24-P17/20-S17/21GRIPPER CLAMP 230mm M9000383 T26/30-P24



38

39

Support for Rear Lights

Kit supports for rear lights


Designation ReferenceKit support for rear lights M9000481

Kit composition :

- 2 reflex supports

- 2 light supports

- 2 fixations

40

Extinguisher Supports

Kit Supports for extinguisher box and working light

Designation Reference PositionKit support for vertical extinguisher M9000495 behind cab/wheelbaseKit support for horizontal extinguisher M9000496 wheelbaseAdditionnal fixation for working light M5331980_80035 behind cabVertical support for working light M5332091_80035 behind cab

Kit support for horizontal extinguisher

Kit support for vertical extinguisher in the wheelbase

Vertical support for working light

Additionnal fixation for working light

Kit support for vertical extinguisher behind cab+Additionnal fixation for working light

Kit support for horizontal extinguisher in the wheelbase

3 mounting solutions :

Note: extinguisher box not supplied

Kit support for vertical extinguisher


41

Tanks Support

Tanks support kit


Designation Reference QuantitySupport kit for tanks 50L to100L 1Support kit for tanks 140L to 200L 2

M9000482

Support kit for tanks 50L to100L Support kit for tanks140L to 200L

Tank fixations drilled ex-work

Available only on the GUIMA tanks

Kit composition :

- 2 mounting fixations

- 4 spacers

42

Tool Box Support

Tool box support kit

Designation ReferenceTool box support kit M9000498

Dimensions

Kit composition :

- 2 flanges

- 2 supports

Ground


43

Netbox and support

Netbox and support

GUIMA PALFINGER – V4 – Avril 2012

Designation Reference Weight L l h750 480 180900 480 180

1050 480 1801200 480 180

Netbox support M5331981_80036 4 kg

Adjustable netbox M9000497 16 kg

Support adapted to Palift subframe

Netbox adjustable to 4 dimensions

44

Side light support

GUIMA PALFINGER – V4 – Avril 2012

Side Light Support

Side light support SCANIA / VOLVO Side light support RVI / MERCEDES

Side light support MAN Side light support DAF

Designation ReferenceSide light support SCANIA / VOLVO M5319590_80036Side light support RVI / MERCEDES M5317314_80036Side light support MAN M5329924_80036Side light support DAF M5329925_80036

(Catalogue GPA EN - V4- en cours [Mode de compatibilité])

Documents

Transcript of (Catalogue GPA EN - V4- en cours [Mode de compatibilité])