Catalogue e om - Amazon S3 · Catalogue e om CSA AC and DC Power Packs HY-SPEC CATALOGUE - CSA AC...
Transcript of Catalogue e om - Amazon S3 · Catalogue e om CSA AC and DC Power Packs HY-SPEC CATALOGUE - CSA AC...
Catalogue
Visit our w
ebsite
www.Hy-s
pec.com
CSA AC and DC Power Packs
HY-SPEC CATALOGUE - CSA AC AND DC POWER PACKS
For more information or for OEM requests
1.866.546.3267To find a Hy-Spec retailer near you
Hy-spec.com
Catalogue
Visit our w
ebsite
www.Hy-s
pec.com
Accessories
HY-SPEC CATALOGUE - ACCESSORIES
WIC-EN-CATALOGUES-COVERS-2012-DYNAMIC-16.indd 17 2014-05-02 16:27:19
Catalogue
Visit our w
ebsite
www.Hy-s
pec.com
AC/DC Power Packs
HY-SPEC CATALOGUE - AC/DC POWER PACKS
WIC-EN-CATALOGUES-COVERS-2012-DYNAMIC-16.indd 5 2014-05-02 16:25:52
Catalogue
Visit our w
ebsite
www.Hy-s
pec.com
Gas Engine Products
HY-SPEC CATALOGUE - GAS ENGINE PRODUCTS
WIC-EN-CATALOGUES-COVERS-2012-DYNAMIC-16.indd 9 2014-05-02 16:26:15
Catalogue
Visit our w
ebsite
www.Hy-s
pec.com
Hydraulic Cylinders
HY-SPEC CATALOGUE - HYDRAULIC CYLINDERS
WIC-EN-CATALOGUES-COVERS-2012-DYNAMIC-16.indd 13 2014-05-02 16:26:35
Catalogue
Visit our w
ebsite
www.Hy-s
pec.com
Hydraulic Valves
HY-SPEC CATALOGUE - HYDRAULIC VALVES
WIC-EN-CATALOGUES-COVERS-2012-DYNAMIC-16.indd 1 2014-05-02 16:25:26
Catalogue
Visit our w
ebsite
www.Hy-s
pec.com
Mobile Directi onal Control Valves
HY-SPEC CATALOGUE - MOBILE DIRECTIONAL CONTROL VALVES
WIC-EN-CATALOGUES-COVERS-2012-DYNAMIC-16.indd 21 2014-05-02 16:27:41
Catalogue
Visit our w
ebsite
www.Hy-s
pec.com
CSA AC and DC Power Packs
HY-SPEC CATALOGUE - CSA AC AND DC POWER PACKS
HYS-EN-CAT-COVER-CSA-AC-AND-DC-POWER-PACKS-052215-FINAL.indd 1 2015-05-22 14:18
� Accessories � AC/DC Power Packs � CSA AC and DC Power Packs � Gas Engine Products � Hydraulic Cylinders � Hydraulic Valves � Mobile Directional Control Valves
HY-SPEC CARRIES A COMPREHENSIVE SELECTION OF HIGH QUALITY HYDRAULIC PRODUCTS
HY-SPEC PRODUCT FAMILY
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.Product availability and specifications are subject to change without notice.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com 3
Ta
ble
of C
on
ten
ts
CCode Builder 6CSA AC Motor and Pump Performance Curves 10DD03 Directional Control Valves 17D03 Modular Valve Options 13DC Motor and Pump Performance Curves 12Dimensions 15Double Acting Power Pack 5EElectrical Motors 15HHow to Read DC Motor and Pump Performance Curves 11MManifold Function 9Manual Override Valve 5Modular Valves - D03 13OOptions 4PParts 16Power Pack Types 8Prebuilt Models 4RReservoirs 14SSchematics 8Snow Plow Power Pack 5Specifications 4TTrailer Power Pack 5VValves Types 8WWarranty Policy 19Wireless Remote Control 18Wiring Diagram for DC Power Pack 18
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.
Product availability and specifications are subject to change without notice.4
Pre
bu
ilt M
od
els
/ S
pe
cif
ica
tio
ns
& O
pti
on
s
MODEL MOTOR RESERVOIR VALVE CONTROL OPTION PUMP SIZE(CC/REV)
SE12H3GSMOR23-R2 HYS 12 Volt 1.5kw Horizontal rectangular 3gal Electrical power up gravity down 2.3
SE12H5GSMOR23-R2 HYS 12 Volt 1.5kw Horizontal rectangular 5gal Electrical power up gravity down 2.3
YBZ-F2.1S1W14/WUAAT1 HYS 12 Volt 1.5kw Horizontal round 1.5 liters Electrical valving for snow plow 2.1
SE12H3GA1MOR233C612R2 HYS 12 Volt 1.5kw Horizontal rectangular 3gal Electrical valving for double acting 2.3
Power Pack Prebuilt Models
HY-SPEC power packs are designed for a wide range of applications.Multiple options are available to suit your needs:
Specifications:• Pressure up to 3000 PSI• Flows up to 7 GPM
Options:General Option• Pumps from 0.63 to 8.08 cc/rev• 1 gallon to 9.25 gallon Horizontal and Vertical reservoir• Pre-wired Remote control with 10’ cable
CSA AC and DC electrical option• 1.5 KW/12V/210A, 2.0KW/24V/110A DC Motor• 1 HP, 2 HP, 3 HP, 110V, 220V, 600V AC CSA Motor• 12Volt, 24Volt, 110 Volt Directional Valves
Valve Option• Manual power up, gravity down• Electrical power up, gravity down• D03 directional valve• D03 Manifold for parallel circuit• D03 Modular valve including port relief valve, pilot operated check valve, throttle valve and pressure reducing valve• Single and double acting manual valve with multiple choice of spool
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.Product availability and specifications are subject to change without notice.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com 5
Tra
iler, S
no
w P
low
& D
ou
ble
Ac
ting
Po
we
r Pa
ck
POWER PACK FOR TRAILER APPLICATION
MODEL DESCRIPTION
SE12H3GSMOR23-R2 HYS Dump Trailer power pack - 7 ton
SE12H5GSMOR23-R2 HYS Dump Trailer power pack - 12 ton
LSV2-08-2NCP-M-ID HYS 2 Position - 2 Way cartridge valve with manual override
Emergency manualoverride feature
7 3/4"
8 1/8"
7 ton = 22"12 ton = 31"
POWER PACK FOR DOUBLE ACTING CIRCUITMODEL DESCRIPTIONSE12H3GA1MOR233C612R2 HYS Double Acting Power Pack
POWER PACK FOR SNOWPLOW
MODEL DESCRIPTION
YBZ-F2.1S1W14/WUAAT1 HYS Snow plow power pack
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.
Product availability and specifications are subject to change without notice.6
CS
A A
C a
nd
DC
Po
we
r P
ac
k C
od
e B
uild
er
• 1HP/115/230VAC/1750RPM CSA AC MOTOR.• 3 Gallon Horizontal Reservoir• 1.27 cc/rev Pump• D03, 3 Pos./4 Ways, Tandem Center, 120V, Din connection, Directional Valve.
MODEL CODE EXAMPLE
#0 #1 #2 #3 #4 #5 #6 #7
HPU CSA1HP12018 P12 H3G A1 3C6110 - -
Model Shown: HPUCSA1HP12018P12H3GA13C6110 HYS
Model Shown Specification
# 1 - CSA1HP12018 AC MOTOR
# 2 - P12 PUMP
# 3 - H3G RESERVOIR
# 4 - A1 D03 MANIFOLD
# 5 - 3C6110 DO3 DIRECTIONAL VALVE
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.Product availability and specifications are subject to change without notice.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com 7
CS
A A
C a
nd
DC
Po
we
r Pa
ck
Co
de
Bu
ilde
r
CODE DESCRIPTION CODE DESCRIPTION
# 1 MOTOR # 4 CIRCUIT
12VDC 12 VOLT, EARTH RETURN (1 TERMINAL) MOTOR PU PUMPING UNIT P & T SAE 6
24VDC 24 VOLT, EARTH RETURN (1 TERMINAL) MOTOR PUGD SOLENOID, SINGLE ACTING, POWER UP GRAVITY DOWN
CSA1HP12018 1HP/110/220/1PH/1800 RPM, MOTOR A1 MANIFOLD FOR 1 D03 VALVE
CSA1HP12036 1HP/110/220/1PH/3600 RPM, MOTOR A2 MANIFOLD FOR 2 D03 VALVES (PARALLEL CIRCUIT)
CSA2HP12018 2HP/110/220/1PH/1800 RPM, MOTOR MAN MONOBLOCK VALVE, MANUAL
CSA2HP12036 2HP/110/220/1PH/3600 RPM, MOTOR # 5 D03 DIRECTIONAL VALVE
CSA2HP23018 2HP/220/440/3PH/1800 RPM, MOTOR 2B212 SINGLE ACTING SPOOL, 12 VOLT, DIN
CSA2HP23036 2HP/220/440/3PH/3600 RPM, MOTOR 2B224 SINGLE ACTING SPOOL, 24 VOLT, DIN
CSA2HP60018 2HP/600/3PH/1800 RPM, MOTOR 2B2110 SINGLE ACTING SPOOL, 110 VOLT, DIN
CSA2HP60036 2HP/600/3PH/3600 RPM, MOTOR 3C212 CLOSED CENTER SPOOL, 12 VOLT, DIN
CSA3HP23018 3HP/220/440/3PH/1800 RPM, MOTOR 3C224 CLOSED CENTER SPOOL, 24 VOLT, DIN
CSA3HP23036 3HP/220/440/3PH/3600 RPM, MOTOR 3C2110 CLOSED CENTER SPOOL, 110 VOLT, DIN
CSA3HP60018 3HP/600V/3PH/1800 RPM, MOTOR 3C312 OPEN CENTER SPOOL, 12 VOLT, DIN
CSA3HP60036 3HP/600V/3PH/3600 RPM, MOTOR 3C324 OPEN CENTER SPOOL, 24 VOLT, DIN
# 2 PUMP 3C3110 OPEN CENTER SPOOL, 110 VOLT, DIN
P06 0.63 CC/REV 3C412 "P" CLOSED, 12 VOLT, DIN
P08 0.89 CC/REV 3C424 "P" CLOSED, 24 VOLT, DIN
P12 1.27 CC/REV 3C4110 "P" CLOSED, 110 VOLT, DIN
P15 1.49 CC/REV 3C6012 TANDEM CENTER, 12 VOLT, DIN
P16 1.60 CC/REV 3C6024 TANDEM CENTER, 24 VOLT, DIN
P20 2.05 CC/REV 3C60110 TANDEM CENTER, 110 VOLT, DIN
P21 2.17 CC/REV # 5 MANUAL VALVE
P25 2.56 CC/REV Q35103 MANUAL VALVE 1 SECTION NO METERING
P28 2.80 CC/REV Q451X103 MANUAL VALVE 1 SECTION METERING
P33 3.32 CC/REV Q452X103 MANUAL VALVE 2 SECTIONS METERING
P38 3.80 CC/REV # 6 REMOTE CONTROL
P43 4.30 CC/REV R2 2 BUTTON WITH 10' CABLE
P51 5.10 CC/REV R4 4 BUTTON WITH 10' CABLE
P60 6.03 CC/REV W2 WIRELESS REMOTE CONTROL
P80 8.08 CC/REV # 7 D03 MODULAR VALVE
# 3 RESERVOIR DLAW THROTTLE & CHECK VALVE (METER OUT)
H1G HORIZONTAL 1 GALLON DLAW1 THROTTLE & CHECK VALVE (METER IN)
H3G HORIZONTAL 3 GALLON DYJ REDUCING VALVE ON "P"
H5G HORIZONTAL 5 GALLON DYP RELIEF VALVE "P" TO "T"
V5G VERTICAL 5 GALLON DYW DUAL RELIEF VALVE "A" & "B" TO "T"
V8G VERTICAL 8 GALLON DAYA PILOT OPRATED CHECK VALVE ON "A"
V9G VERTICAL 9.25 GALLON DAYB PILOT OPRATED CHECK VALVE ON "B"
DAYW DUAL PILOT OPRATED CHECK VALVE
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.
Product availability and specifications are subject to change without notice.8
Po
we
r P
ac
k V
alv
e T
yp
es
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.Product availability and specifications are subject to change without notice.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com 9
Ma
nifo
ld F
un
ctio
n
• Hy-Spec Power Packs offer flexibility. Multiple options can be configured to cover a wide rande of applications.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.
Product availability and specifications are subject to change without notice.10
CS
A A
C M
oto
r a
nd
Pu
mp
Pe
rfo
rma
nc
e C
urv
e
TESTING CONDITIONS1.0 ~ 3.0 C.C. PumpsOIL VISCOSITY: 46 CSTOIL TEMPERATURE: 40°C
3. 0
2. 31. 9
1. 5
1. 0 1. 0
1. 5
1. 9
2. 3
3. 0
1. 0
1. 5
1. 92. 3
3. 0
1. 0
1. 5
1. 9
2. 3
3. 0
1720 RPM 1720 RPM
3450 RPM3450 RPM
0
1
2
3
5
6
7
4
10
8
9
11
13
12
24
0
26
2
6
20
22
8
4
DE
LIV
ER
Y (L
PM)
Pressure (bar)
30 60 90 120 210 240180150 270
0 7 20 9
Pressure (bar)
180150 21030 60
DE
LIV
ER
Y (L
PM)
120 240
90 180 210 27015003 06 240
Pressure (bar)
120
15060 9030 120
Pressure (bar)
210 240180 270
0. 5
0
1. 0
2. 0
1. 5
3. 5
2. 5
4. 0
3. 0
6. 0
5. 5
6.
5. 0
4. 5
INPU
T H
OR
SE P
OW
ER
(HP)
INPU
T H
OR
SE P
OW
ER
(HP)
2. 0
3. 5
4. 0
6. 5
2. 5
3. 0
6. 0
0. 5
1. 5
5. 0
4. 5
0
5. 5
1. 0
4. 8
0. 4
2. 0
2. 8
4. 0
0. 8
5. 2
1. 6
1. 2
3. 2
2. 4
3. 6
0 ( KW )
4. 4
0. 8
3. 2
5. 2
4. 4
0. 4
2. 8
2. 4
1. 6
2. 0
3. 6
4. 0
0 ( KW )
1. 2
4. 8
18
16
14
10
12
• When RPM is known, you can easly find the pump flow delivery; refer to the left chart below. Flow are in LPM, to convert to GPM divide result by 3.7854.
• When pump displacement and pressure requirement are known, input horsepower (HP) needed, can be found on the right chart below. Electric motor RPM need to be considered.
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.Product availability and specifications are subject to change without notice.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com 11
• DC power pack pump flow will decrease as system pressure requirement increases, please refer to flow curve (Q) to find flow reduction.
• When application flow and pressure is known you can find current requirement and define duty cycle allowed by following these easy steps:
1. Find cross point of flow (Q) and pressure (P) required on the chart. GPM / 3.7854 = LPM ***** PSI/145=MPa2. Select closest pump displacement (Q curves) to the cross point.3. In relation to pressure find vertical cross point on the current curve ( I ) of the selected pump.4. Draw a horizontal line from this point to the right side I(A) number to find amperage.5. Take I(A) number and plot on bottom of S2/S3 chart I(A) line.6. Draw a vertical line from this point that intersects with S2/S3 curves.7. Horizontaly to the left, you will find maximum time the unit can run before motor brushes reach 150°C (Maximum DC motor operating temperature).8. Horizontaly to the right, you will find percentage of a 10 minutes cycle the unit can run.
Short time-duty type: S2Operation at constant load, of short duration, without thermal equilibrium being reached. A no load period follows, sufficient for the motor to return to ambient temperature.Example: S2=4.5 minutesThe motor runs continuously for 4.5 minutes, and stops a time sufficient to return to ambient temperature.
Intermittent periodic-duty type: S3Operations which consist of a sequence of uniform cycles (duty cycle 10 minutes) consisiting of a period at constant load and a no load period.Example: S3=13%The motor runs 1.3 minutes and stops 8.7 minutes.
Ho
w to
Re
ad
DC
Mo
tor a
nd
Pu
mp
Pe
rform
an
ce
Cu
rve
s
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.
Product availability and specifications are subject to change without notice.12
DC
Mo
tor
& P
um
p P
erf
orm
an
ce
Cu
rve
s
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.Product availability and specifications are subject to change without notice.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com 13
OPTION P/N AND DESCRIPTION SYMBOL STACK HEIGHT
MOUNTING HOLE THREAD
2B*3C*
See p.17 for D03 directional valve model code 45mm
M5 x 0.8
DLAWDLA02-W-31.5-70Throttle with free flow check valve meter out
40mm
DLAW1DLA02-W1-31.5-70Throttle with free flow check valve meter in
40mm
DYJ DYJ02-P-21-70Pressure reducing valve 40mm
DYP DY02-P31.5-70Relief valve 40mm
DYW DY02-W-31.5-70Dual port relief valve 40mm
DAYA DAY02-A1-31.5-70Pilot operated check valve on A 40mm
DAYB DAY02-B1-31.5-70Pilot operated check valve on B 40mm
DAYW DAY02-W1-31.5-70Dual Pilot operated check valve 40mm
On circuit #0 type manifold, in addition to D03 directional valve, modular valve options can be installed for circuit flexibility.For proper mounting bolt length add 40 mm to the height listed in the chart per modular valve.
D0
3 M
od
ula
r Va
lve
Op
tion
s
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.
Product availability and specifications are subject to change without notice.14
Reservoir
ORDERING CODE REF.
RESERVOIR P/N DIAMETER L (mm) H (mm) VOLUME
(liters)
H1G KR45W HYS 170 250 40 3.8
ORDERING CODE REF. RESERVOIR P/N L
(mm)A
(mm)B
(mm)C
(mm)VOLUME
(liters)
H3G TK03 WUXI HYS 301.5
213 25 20.5
3.0 GAL (12)
H5G TK15 WUXI HYS 534 5.0 GAL (20)
ORDERING CODE REF. RESERVOIR P/N L (mm) K (mm) H (mm) VOLUME
(liters)
V5G TK-120-20L-L-D HYS 340 280 220 17.1
V8G TK-120-30L-L-A HYS
L (mm) K (mm) H (mm) VOLUME(liters)
360 300 300 27.1
ORDERING CODE REF. RESERVOIR P/N L (mm) K (mm) H (mm) VOLUME
(liters)
V9G TK-120-35L-L-A HYS 340 460 300 35CS
A A
C a
nd
DC
Po
we
r P
ac
ks
- G
en
era
l Dim
en
sio
ns
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.Product availability and specifications are subject to change without notice.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com 15
Add up “L” dimensions of reservoir and electric motor plus 32 mm (manifold) to get typical overall length of power pack.For all other dimension, please contact our tehchnical support department.
Electrical Motors
AC
DC
MOTOR REFERENCES POWER VOLTAGE TYPE L
12VDC DM21-1WWU-3BC2R-B HYS 1500W 12 EARTH RETURN (MOTOR WITH 1 TERMINAL)181
24VDC DM21-2AWU-3BC1R-B HYS 2000W 24 EARTH RETURN (MOTOR WITH 1 TERMINAL)
ORDERING CODE REF. AC MOTOR P/N HP VOLTAGE RPM A B L W
CSA1HP12018 F56C1S4C HYS1 115/230
1800
4.6
83 242 278CSA1HP12036 F56C1S2C HYS 3600CSA2HP12018 F56C2S4C HYS
2
115/2301800
CSA2HP12036 F56C2S2C HYS 3600CSA2HP23018 F56C2M4A HYS
220/4401800
85 248 245
CSA2HP23036 F56C2M2A HYS 3600CSA2HP60018 F56C2M4D HYS
5751800
CSA2HP60036 F56C2M2D HYS 3600CSA3HP23018 F56C3M4A HYS
3220/440
1800
6.3CSA3HP23036 F56C3M2A HYS 3600CSA3HP60018 F56C3M4D HYS
5751800
CSA3HP60036 F56C3M2D HYS 3600
Unit: mm
108.5
82.5
8.5
Ø
176
157
68
110
Ø149.22
160
16
4XR5
100
Ø11
4.3±
0.0
54
Ø15
.87
7.5
42.3
76.2 64.2
37
2
140
8X4.2576
.2
4X3/8-16UNC-2B 15
88.9
0 -1.5
45° 0'
B W
LA
-
L
CS
A A
C a
nd
DC
Po
we
r Pa
ck
s - G
en
era
l Dim
en
sio
ns
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.
Product availability and specifications are subject to change without notice.16
CODE DESCRIPTION P/N
# 1 - MOTOR12VDC 12 VOLT, EARTH RETURN (1 TERMINAL) MOTOR DM21-1WWU-3BC2R-B HYS24VDC 24 VOLT, EARTH RETURN (1 TERMINAL) MOTOR DM21-2AWU-3BC1R-B HYS
CSA1HP12018 1HP/110/220/1PH/1800 RPM, MOTOR F56C1S4C HYSCSA1HP12036 1HP/110/220/1PH/3600 RPM, MOTOR F56C1S2C HYSCSA2HP12018 2HP/110/220/1PH/1800 RPM, MOTOR F56C2S4C HYSCSA2HP12036 2HP/110/220/1PH/3600 RPM, MOTOR F56C2S2C HYSCSA2HP23018 2HP/220/440/3PH/1800 RPM, MOTOR F56C2M4A HYSCSA2HP23036 2HP/220/440/3PH/3600 RPM, MOTOR F56C2M2A HYSCSA2HP60018 2HP/600/3PH/1800 RPM, MOTOR F56C2M4D HYSCSA2HP60036 2HP/600/3PH/3600 RPM, MOTOR F56C2M2D HYSCSA3HP23018 3HP/220/440/3PH/1800 RPM, MOTOR F56C3M4A HYSCSA3HP23036 3HP/220/440/3PH/3600 RPM, MOTOR F56C3M2A HYSCSA3HP60018 3HP/600V/3PH/1800 RPM, MOTOR F56C3M4D HYSCSA3HP60036 3HP/600V/3PH/3600 RPM, MOTOR F56C3M2D HYS
# 2 - RESERVOIRH1G HORIZONTAL 1 GALLON KR45W HYSH3G HORIZONTAL 3 GALLON TK03 WUXI HYSH5G HORIZONTAL 5 GALLON TK15 WUXI HYSV5G VERTICAL 5 GALLON TK-120-20L-L-D HYSV8G VERTICAL 8 GALLON TK-120-30L-L-A HYSV9G VERTICAL 9 GALLON TK-120-35L-L-A HYS
# 3 - CIRCUITPU PUMPING UNIT P & T SAE 6
PUGD POWER UP/GRAVITY DOWN2pos/2 way, lead wire, 12 VDC, MANUAL OVERRIDE LSV2-08-2NCP-M-1D HYS2pos/2 way, lead wire, 24 VDC LSV-08-2NCP-2D HYS2pos/2 way, lead wire, 110 VAC LSV-08-2NCP-3D HYS
A1 1x D03 DIRECTIONAL VALVED03 manifold adaptor kit D03ADAPTK HYS1x valve D03 manifold D03MAN HYSBolt kit for 1x D03 manifold MBK1D03 HYS
A2 2x D03 DIRECTIONAL VALVE, PARALLELD03 manifold adaptor kit D03ADAPTK HYS1x valve D03 manifold D03MAN HYS (2x require)Bolt kit for 2x D03 manifold MBK2D03 HYS
MAN MONOBLOCK VALVE, MANUAL See manual valve next page#4 - PUMP
P06 0.63 CC/REV CBK06PK HYSP08 0.89 CC/REV CBK08PK HYSP12 1.27 CC/REV CBK12PK HYSP15 1.49 CC/REV CBK15PKHYSP16 1.60 CC/REV CBK16PK HYSP20 2.05 CC/REV CBK20PK HYSP21 2.17 CC/REV CBK21PK HYSP25 2.56 CC/REV CBK25PK HYSP28 2.80 CC/REV CBK28PK HYSP33 3.32 CC/REV CBK33PK HYSP38 3.80 CC/REV CBK38PK HYSP43 4.30 CC/REV CBK43PK HYSP51 5.10 CC/REV CBK51PK HYSP60 6.03 CC/REV CBK60PK HYSP80 8.08 CC/REV CBK80PK HYS
Po
we
r P
ac
k -
Pa
rts
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.Product availability and specifications are subject to change without notice.
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com 17
CODE DESCRIPTION P/N
# 5 - D03 DIRECTIONAL VALVE
2B212 SINGLE ACTING SPOOL, 12 VOLT, DIN FW-02-2B2-D12-Z5L-60 02-0322012 HYS
2B224 SINGLE ACTING SPOOL, 24 VOLT, DIN FW-02-2B2-D24-Z5L-60 02-0322024 HYS
2B2110 SINGLE ACTING SPOOL, 110 VOLT, DIN FW-02-2B2-B110-Z5L-60 02-0322110 HYS *
3C212 CLOSED CENTER SPOOL, 12 VOLT, DIN FW-02-3C2-D12-Z5L-60 02-0332012 HYS
3C224 CLOSED CENTER SPOOL, 24 VOLT, DIN FW-02-3C2-D24-Z5L-60 02-0332024 HYS
3C2110 CLOSED CENTER SPOOL, 110 VOLT, DIN FW-02-3C2-B110-Z5L-60 02-0332110 HYS *
3C312 OPEN CENTER SPOOL, 12 VOLT, DIN FW-02-3C3-D12-Z5L-60 02-0333012 HYS
3C324 OPEN CENTER SPOOL, 24 VOLT, DIN FW-02-3C3-D24-Z5L-60 02-0333024 HYS
3C3110 OPEN CENTER SPOOL, 110 VOLT, DIN FW-02-3C3-B110-Z5L-60 02-0333110 HYS *
3C412 "P" CLOSED, 12 VOLT, DIN FW-02-3C4-D12-Z5L-60 02-0334012 HYS
3C424 "P" CLOSED, 24 VOLT, DIN FW-02-3C4-D24-Z5L-60 02-0334024 HYS
3C4110 "P" CLOSED, 110 VOLT, DIN FW-02-3C4-B110-Z5L-60 02-0334110 HYS *
3C6012 TANDEM CENTER, 12 VOLT, DIN FW-02-3C60-D12-Z5L-60 02-0336012 HYS
3C6024 TANDEM CENTER, 24 VOLT, DIN FW-02-3C60-D24-Z5L-60 02-0336024 HYS
3C60110 TANDEM CENTER, 110 VOLT, DIN FW-02-3C60-B110-Z5L-60 02-0336110 HYS *
* Included rectified DIN connector must be used with 110 VAC valve.
# 5 - MANUAL VALVE, DOUBLE ACTING
Q35103 MANUAL VALVE 1 SECTION NO METERING Q35-F7SN-103/A1/M1-SAE HYS
Q451X103 MANUAL VALVE 1 SECTION METERING Q45/1E-F1SN-103/A1/M1-F3D-S-SAE HYS
Q452X103 MANUAL VALVE 2 SECTIONS METERING Q45/2E-F1SN-2X103/A1/M1-F3D-S-SAE HYS
# 6 - REMOTE CONTROL
R2 2 BUTTON WITH 10' CABLE RC-2B3L3M HYS
R4 4 BUTTON WITH 10' CABLE RC-4B6L3M HYS
W2 WIRELESS REMOTE CONTROL GS-HYD-07 HYS
# 7 - D03 MODULAR VALVE
DLAW THROTTLE & CHECK VALVE (METER OUT) DLA02-W-31.5-70 HYS
DLAW1 THROTTLE & CHECK VALVE (METER IN) DLA02-W1-31.5-70 HYS
DYJ REDUCING VALVE ON "P" DYJ02-P-21-70 HYS
DYP RELIEF VALVE "P" TO "T" DY02-P-31.5-70 HYS
DYW DUAL RELIEF VALVE "A" & "B" TO "T" DY02-W-31.5-70 HYS
DAYA PILOT OPRATED CHECK VALVE ON "A" DAY02-A1-31.5-70 HYS
DAYB PILOT OPRATED CHECK VALVE ON "B" DAY02-B1-31.5-70 HYS
DAYW DUAL PILOT OPRATED CHECK VALVE DAY02-W1-31.5-70 HYS
MISCELLANEOUS PARTS
- 12VDC STARTER SOLENOID SINGLE POLE YBZ1203 Y HYS
- MANIFOLD BLOCK O-RING 348PK-02 DAE
Po
we
r Pa
ck
- Pa
rts
1 . 8 6 6 . 5 4 6 . 3 2 6 7 www.Hy-spec.com
ASK FOR HY-SPEC QUALITYNote actual products may differ from photos shown in this brochure.
Product availability and specifications are subject to change without notice.18
When you connect the power source (battery), you must use the correct wire size for amperage requirement of the circuit to prevent the wire from over heating.
See performance curve on page 9 for amperage requirement.
AWG Wire Size Max Current Amperage Specifications0000 310
• Ambient temperature: 25 ~ 30oC• Working time: approx 30 sec.• Wire length: 1m
000 250
00 190
0 150
1 119
2 94
Wire Connection DiagramMax. Tighten Torque36 lbf · in(4.1 N · m)
Max. Tighten Torque16 lbf · in(1.8 N · m)
Up
Small Current Wire
Control Switch
Down
PowerWires
Battery
Oil Tank
SmallCurrentWire
Small Current WireSolenoid Valve
(EARTH RETURN MOTOR)
Small current wire must hold 2 Amps minimum.
WIRELESS REMOTE CONTROLMODEL DESCRIPTION OPERATING VOLTAGE MAXIMUM CURRENT OPERATING TEMPERATURE
GS-HYD-07-HYS Wireless remote control +9 V DC to +28V DC 10 Amps DC Max-40 C to +125 C
GS-XMTR-02 HYS Transmitter only
Features and Benefits• Can handle 12 or 24 volt dc.• Potted for protection!• Installation wires instead of terminals• Learning transmitter!• 3-minute automatic time-out feature.• In-line fuse already installed!• Back-up manual switches on receiver.• On/off switch on transm. & receiver!• Can still use the tethered remote.
Ho
w t
o C
on
ne
ct
Va
rio
us
Wir
es
to
DC
Hyd
rau
lic P
ow
er
Pa
ck
HYDRAULIC AND GAS ENGINE PRODUCTS LIMITED WARRANTY
HY-SPEC HYDRAULIK WARRANTS ITS HYDRAULIC PRODUCTS AGAINST DEFECTS IN DESIGN, MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12-MONTHS FROM THE DATE OF SALE.
HY-SPEC HYDRAULIK WILL REPLACE ANY PART OF ITS PRODUCTS, FREE OF CHARGE, IF AFTER INSPECTION BY HY-SPEC HYDRAULIK THE PART IS DEEMED A MANUFACTURING DEFECT.
HY-SPEC HYDRAULIK WARRANTS ITS GAS ENGINE PRODUCTS AGAINST DEFECTS IN DESIGN, MATERIAL AND WORKMANSHIP FOR THE FOLLOWING PERIOD FROM THE DATE OF SALE:
- 12 MONTHS : CONSUMER USE**- 3 MONTHS : COMMERCIAL USE***
THIS WARRANTY DOES NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO UNAUTHORIZED MODIFICATION, REPAIR OR
ALTERATION, AN ACCIDENT, IMPROPER OPERATION OR MAINTENANCE, ABNORMAL CONDITIONS OR THE WEAR FROM NORMAL USE.
HY-SPEC HYDRAULIK SHALL NOT BE LIABLE FOR LOSS OF TIME, MANUFACTURING COSTS, LABOUR, TRANSPORT, MATERIAL, LOSS OF PROFITS OR CONSEQUENTIAL DAMAGES (DIRECT OR INDIRECT) AS A RESULT OF DEFECTIVE PRODUCTS.
HY-SPEC HYDRAULIK’S RESPONSIBILITY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT OR THE REIMBURSEMENT OF THE PRICE PAID AT THE TIME IT WAS ORDERED.
ANY WARRANTY CLAIM MUST BE PRESENTED WITHIN 30 DAYS OF DISCOVERING THE MANUFACTURING DEFECT. SHIPPING RETURN CHARGES ARE AT THE CUSTOMER’S EXPENSE.
** CONSUMER USE MEANS PERSONAL USE BY A CONSUMER.*** COMMERCIAL USE MEANS ALL OTHERS USERS, INCLUDING COMMERCIAL, INCOME GENERATING OR RENTAL.
HY-SPEC WARRANTY
For more information or for OEM requests
1.866.546.3267To find a Hy-Spec retailer near you
Hy-spec.com
Your distributor
HY-SPEC CATALOGUE - CSA AC AND DC POWER PACKS
HY-SPEC-CATALOGUE-CSA-AC-DC-POWER-PACKS-17-07-2015HY-SPEC IS A WAJAX INDUSTRIAL COMPONENTS BRAND.
HY-SPEC HYDRAULIK specializes in the import and export of a wide range of high quality hydraulic components such as: agricultural, telescopic and utility cylinders; directional control valves; gas engines; power packs and much more.
The HY-SPEC brand name stands for high quality hydraulic components. These products are manufactured around the world to our high specifications, which are established by our engineering department.
The HY-SPEC team members have been chosen for their experience and are trained to give professional and efficient service, which you can depend on. Their experience totals over 100 years in the hydraulic industry. They work closely with our customers to provide the best solution for their application.
CSA AC and DC Power Packs
Typical Equipment
� Fork Lifts � Loaders � Presses � Tractors
Typical Industries
� Agriculture � Construction � Forestry � Mining