Catalogue 2018

22222

The philosophy that has driven TSA for more than 30 years is summarized in two words "Constant Evolution".

TSA works hard every day innovating to meet the professional sound market trends, engineering and manufacturing a wide range of high performance products to supply solutions for any mobile or permanent installations.

This is the TSA R & D department set of mind, looking forward always. We research, test and analyze new materials, technologies and manufacturing processes in order to improve and create revolutionary sound systems.

We invest in R & D to bring high level solutions to the market, creating a powerful new dimension in the sound reinforcement industry.

The satisfaction of well done job is rewarded when the audience appreciates and enjoys the quality of our systems in live events and fixed installations.

• PA for stadia, rental companies, theatres, conference room, houses of worship, TV studios, shopping centres and sport centres.

• TSA® Engineering Department is open to OEM products development and new manufacturing projects.

• Technical Support and Technical services. All TSA products have two years' warranty.

HARD SERIES

CONSTANT EVOLUTION

44444

AX-212TR FEATURES

DESCRIPTION

Technical data

Usable bandwidth (-10dB) 38 - 20.000 Hz

Maximum SPL (*) 146 dB (preset)

Horizontal Coverage angle: 80° symmetric (-6 dB points)

Vertical Coverage angle: Depends of the array elements and curvature

Transducers LF: 2 x 12’’ Neodymium LF woofer

Transducers MF: 4 x 6,5’’ MF woofer

Transducers HF: 2 x 1,4’’ Neodymium compression driver with 2.9’’ voice coil

Nominal impedance: LF1: 8 Ω / LF2: 8 Ω / MF: 8 Ω / HF:16 Ω

AES power handling: LF1: 700 W / LF2: 700 W / MF: 1000 W / HF:140 W

Connectors: 2 x NL8

Rigging components: 4-point rigging system

Permissible flown load: 22 units (2-points)

Inter-enclosure angles (degrees): 0 / 0.25 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10

Physical data

W x H/h x D: 1186 x 380/303 x 558 mm

Weight (net): 71 kg.

Cabinet: First grade Baltic birch plywood

Side panels: Steel rigging hardware

Finish: High resistance rough black paint

Front Steel grill: Steel grid with anti-corrosion coating and foam

Rigging components: High grade steel with anti-corrosion coating

(*) Peak level at 1 m under free field conditions using 10 dB crest factor pink noise with specified preset.

• 3-way line array cabinet • High performance for long-throw

aplications • Controlled and constant directivity • Fast and intuitive fliying hardware • 2540 W AES // 146 dB peak

New and improved AX-212TR 3-way line source offers a clear and deep response for applications where high performance is required. This system is used in combination with SB-218LX subwoofer system for large format applications such as touring, stadiums or fixed installation. Each array element incorporates 2x12-inch neodymium transducers with cooling technology which offers powerful and clean high power bass without performance losses and 4x6.5-inch transducers for the mid frequencies for total clarity and transparency. It also features a exclusive double 1.4-inch waveguide design optimized for 2 neodymium compression drivers with 2.9-inch voice coil, offering broad and bright high frequencies reproduction with low distortion, even at large listening distances. The maximum vertical opening between units is 10 degrees. To facilitate the assembly, AX-212TR incorporates a double mechanism that uses a variable fixation, which oscillates between 0-10 degrees as a sliding and fixed positioning. The Flying Frame System CHSE212TR uses the same regulation mechanism as the units. In addition, a transport dolly (CHST212TR) is offered to store, transport and stack the AX-212TR cabinets.

55555

AX-210S/ND FEATURES

DESCRIPTION

AX-210S is a 2-way, full range bi-amp line array cabinet including dual 10-inch with cooling technology and 2x1.4-inch exit compression driver with 1.75-inch voice coil coupled to our waveguide design. Enclosure design has been optimized with phase corrector to promote horizontal and vertical coupling, preventing dispersion lobbing and improving the consistency of the wave front. The AX-210ND is the system version with all neodymium components and 2.9-inch voice coil compression drivers, achieving greater performance over long distances in a lighter enclosure. This system offers a wide range of possibilities for fixed and mobile installations and is an excellent choice for medium to large sound reinforcement applications, such as dance clubs, corporate events or medium size events. The SB-18LX subwoofer is used to reinforce the low frequencies. The AX-210SP incorporates a passive filter for small applications. The integrated rigging system allows easy installation of the system. It offers a flying piece for few units (up to 4) easy to fit and designed for fixed installation (HPVAX10-12). It also has the flying frame (CHSE210SG) and transport dolly (CHST210S) for stack and transport this system.

• 2x 10 inch 2-way line array cabinet • Controlled wide directivity (110°) • Technology to eliminate mid frequencies

lobing • 1140 W AES // 143 dB-peak

Technical data AX-210S AX-210SP AX-210ND

Usable bandwidth (-10dB) 60 - 19.000Hz 58 - 20.000Hz

Maximum SPL (*) 143 dB (preset) 144 dB (preset)

Horizontal coverage angle: 110° (-6 dB points) 110° (-6 dB points)

Vertical coverage angle: Depends of the number of elements and array curvature

Transducers LF: 2 x 10’’ LF woofer 2 x 10’’ Neodymium LF

Transducers HF: 2 x 1,4’’ Compression driver 2x 1,4'' Neodymium comp

driver. 2,9'' Voice coil

Nominal impedance: LF:4/16 Ω // HF: 4/16 Ω 4/16 Ω LF: 4/16 Ω // HF: 4/16 Ω

AES power handling: LF: 1000 W // HF: 150 W 1140 W LF: 1400 W // HF: 150 W

Connectors: 2 x NL4


Permissible flown load: 16 units

Inter-enclosure angles (degrees): 0 / 1 / 2 / 3 / 5

Physical data

W x H/h x D: 622 x 302 x 516 mm

Weight (net): 42 kg 38 kg






66666

AX-112ND/A FEATURES

DESCRIPTION

• 12 inch 2-way line array cabinet • High performance on compact design • Controlled wide directivity (100°) • 800 W AES // 138 dB-peak

AX-112ND is our 2-way line source cabinet, incorporating single 12-inch transducer offers a high performance on amazing compact design. Our waveguide with two next generation 1.75-inch compression driver provide seamless mid-high energy with minimized distortion at very high SPL levels. For long-throw applications, the AX-112A spherical unit can be coupled for the down-fill system. Combined with the SB series subwoofers, make up a high performance and quality solution for applications such as touring and rental. AX-112 incorporates an integrated double suspension mechanism for easy and quick implementation, a mobile element that allows opening angles from 0 to 10 degrees, and another fixed element to configure the separation angles between units. The flying frame system CHSE112 presents the same hardware mechanism. The system is completed with the CHST112 dolly for transport and stack the units.

Technical data AX-112ND AX-112A



Horizontal coverage angle: 90° (-6 dB) 90° (-6 dB)

Vertical coverage angle: Depends of the number of elements

and array curvature 40° (-6 dB)

Transducers LF: 1 x 12’’ Neodymium LF 1 x 12’’ LF

Transducers HF: 2x1,4'' Compression driver

1,75'' Voice coil 1'' Compression driver.

1,75" voice coil

Nominal impedance: 8 Ω

AES power handling: 800 W 600 W

Connectors: 2 x NL4



Inter-enclosure angles (degrees): 0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10

Physical data

W x H/h x D: 623 x 332/241 x 551 mm

Weight (net): 36 kg. 31 kg.




Grill: Steel grid with anti-corrosion coating and foam



77777

AX-110LA/LE

DESCRIPTION

FEATURES

• 2-way line array cabinet • Ultra-compact design • Controlled and constant directivity • Fast and intuitive fliying hardware • 650 W AES // 135 dB-peak

AX110LA is 10-inch line source that offers high performance (135 dB-peak) on a really compact size. The system offers a wide range of medium format applications, such as touring, rental and fixed installation. The SB-18LX or SB-218LX subwoofer is used to reinforce the low frequencies. Each unit mounts to 10-inch transducer with cooling technology and dual compression driver with 1.75-inch voice coil coupled to independent waveguide. AX-110LE incorporates 3xHF units for medium-thrown applications. The built-in hardware facilitates the system flow and allows variable angulation from 0 to 10 degrees in 1 degree steps between units. The flying frame (CHSEAX110) uses the same system as the enclosures and makes it possible to fly up to 22 cabinets. CHST110 trasnport dolly is available to store, transport and stack the system.

Technical data AX-110LA AX-110LE



Horizontal coverage angle: 90° (-6 dB points) 100° (-6 dB points)

Vertical coverage angle: Depends of the number of elements and array curvature

Transducers LF: 1 x 10” LF woofer

Transducers HF: 2 x 1,75” Compression driver 3 x 1” HF unit



Connectors: 2 x NL4


Permissible flown load: 22 units (2-point)

Inter-enclosure angles (degrees): 0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10

Physical data

W x H/h x D: 604 x 290/222 x 440 mm








88888

AX-215AS FEATURES

DESCRIPTION

AX-215AS is our most powerful linear source system, designed for large format events such as stadiums, touring and festivals. It incorporates 2x15-inches horn-loaded units for low frequencies that offer 148 dB peak for a deep response. It also mounts 4x 6.5-inch transducers for mid frequency range and 3x 1.4” compression drivers coupled with our exclusive waveguide to achieve a clear response even over long distances. The system has a robust flying system for angulation between 0 to 10 degrees, completed with the CHSE215 flying frame made of 8 mm iron that allows a fast flow from the transport dolly (CHST215)

Technical data AX-215AS

Usable bandwidth (-10 dB) 40 - 20.000 Hz


Horizontal Coverage: 110° symmetric (-6 dB points)

Vertical Coverage: Depends of the array elements and curvature

Transducers LF: 2 x 15” LF woofer

Transducers MF: 4 x 6,5” MF woofer

Transducers HF: 3 x 1,4” Compression driver. 1.75” Voice-coil

Nominal impedance: LF1: 8 Ω // LF2: 8 Ω // MF: 8 Ω // HF: 24 Ω

AES power handling: LF1: 1000W // LF2: 1000W // MF: 1000W // HF: 200 W

Connectors: 2 x NL8


Permissible flight load: 20 units (2-point)

Inter-enclosure angles (degrees): 0 / 1 / 2 / 3 / 4 / 5

Physical data

W x H x D: 1190 x 440 x 720 mm








• 3-way line array cabinet • High performance for long-throw

aplications • Controlled wide directivity • Hardy intuitive fliying hardware • 3200 W AES // 148 dB peak

Z SERIES

CONSTANT EVOLUTION

1010101010

Z-24 FEATURES

DESCRIPTION

• Ultra-slim 2-way line array • Integrated solution for small aplications • Quick assembly • 400 W AES // 132 dB peak

Z-24 is the most plane line array system on the market. With variable directivity, the height of each unit is 13 inch. The 2-way speaker cabinet is powered by one single amplifier channel (HF crossover network) and mounts two 6.5 inch low-mid frequency transducers and 4-1 inch high frequency piezoelectric horns. This cabinet offers a wide range of possibilities for permanent and mobile installations and is an excellent choice for medium and small sound reinforcement applications. Low frequencies can be reinforced with the SB-15 subwoofer. The mechanical design of the Z-24 enables vertical angles between units of 0 to 10 degrees without use of flying pins allowing easy and quickly deployment for just one operator. The rigging frame (HZ-26) uses the same rigging system as the cabinets.

Technical data Z-24

Usable bandwidth (-10dB) 80 - 20.000Hz


Coverage angle (-6 dB). Horizontal: 90°


Transducers LF: 2 x 6,5’’ LF woofer

Transducers HF: 4 x 1’’ HF unit

Nominal impedance: 4/16 Ω

AES power handling: 400 W

Connectors: 2 x NL4


Permissible flight load: 12 units

Inter-enclosure angles (degrees): 0 / 0.25 / 2.5 / 5 / 10

Physical data

W x H x D: 440 x 364 x 150 mm.








1111111111

Z-600 FEATURES

DESCRIPTION

• Ultra-slim 2-way line array • Integrated solution for small aplications • Quick assembly • 600 W AES // 136 dB peak

Z-600 is the most market plane line array system. With variable directivity, the height of each unit is 20 inch. The 2-way speaker cabinet is powered by one single amplifier channel (HF crossover network) and mounts two 10-inch low-mid frequency for a deep response and 6x1-inch high frequency piezoelectric horns that offers a brilliant and crispy high frequencies. This cabinet offers a wide range of possibilities for permanent and mobile installations and is an excellent choice for medium and small sound reinforcement applications. Low frequencies can be reinforced with the SB-15 or SB-18LX subwoofer. The mechanical design (HZ-600) of the Z-600 enables vertical angles between units of 0 to 10 degrees with-out use of flying pins allowing easy and quickly deployment for just one operator. The rigging frame (CHSEZ600) uses the same rigging system as the cabinets.

Technical data Z-600





Transducers LF: 2 x 10’’ LF woofer


Nominal impedance: 4/16 Ω


Connectors: 2 x NL4




Physical data

W x H x D: 560 x 540 x 150 mm.








SB SERIES

CONSTANT EVOLUTION

1313131313

SB-218/LX FEATURES

DESCRIPTION

• 2 x 18-inch long excursion subwoofer system • Detailed and powerful “kick” • Neodymium transducers with cooling

technology • Cardioid connector on demand • 3200 W AES // 146 dB-peak

New SB-218LX is a horn-loaded subwoofer system with the highest performance on the market for that size. Loaded with two long excursion neodymium 18-inches, it is surprising for its compact cabinet and also for the punch and clear sound that is achieved. SB-218 is the ferrite transducer same version, with 2800 W AES and 144 dB-peak, with practically the same sound and functionality as the neodymium version. The system is made with baltic phenolic birch plywood and all necessary reinforcements, resulting in a surprisingly clean response and mechanical noise free. Each unit incorporates slots that allow stacking units easely. In addition, it is possible to incorporate on demand NL4 connectors on the front to facilitate cardioid configurations. SB-218LXH and SB-218H are the same products but incorporating the flying hardware manufactured with the highest quality and maximum strength steel.

Technical data SB-218 SB-218H SB-218LX SB-218LXH

Usable bandwidth (-10dB) 33 Hz - 170Hz 28 Hz - 170Hz


Transducers LF: 2 x 18’’ LF woofer 2 x 18’’ Neodymium LF woofer


Nominal impedance: 4 Ω 4 Ω

Connectors: 2 x NL4 (Cardioid front connector on demand)

Physical data

W x H x D 546 x 940/1004 x 719 mm 546 x 940/1004 x 719 mm

Weight (net) 85 kg. 104 kg. 70 kg. 89 kg.

Cabinet First grade Baltic birch plywood

Side panels: - Steel rigging panels - Steel rigging panels



Rigging components - High grade steel - High grade steel


1414141414

SB-18/LX FEATURES

DESCRIPTION

• 18-inch long excursion subwoofer system • Detailed and powerful “kick” • Neodymium transducers with cooling technology • Cardioid connector on demand • 1600 W AES // 140 dB peak

New SB-18LX is our compact 18-inch subwoofer system. A light-weight, long excursion neodymium driver are mounted in an efficient horn-loaded subwoofer. Fully designed to reproduce clean, musical low frequency information on a ultra-compact size. SB-18 is the ferrite transducer same version, with 1400 W AES and 138 dB-peak, with the same functionality as the neodymium version. The system is constructed with nordic phenolic birch plywood and all necessary reinforcements, resulting in a surprisingly clean response and mechanical noise free. Each unit incorporates slots that allow stacking units easily. In addition, it is possible to incorporate on demand NL4 connectors on the front to facilitate cardioids configurations. SB-18LXH and SB-18H are the same products but incorporating the flying hardware manufactured with the highest quality and maximum strength steel.

Technical data SB-18 SB-18H SB-18LX SB-18LXH

Usable bandwidth (-10dB) 35 Hz - 170Hz 33 Hz - 170Hz


Transducers LF: 1 x 18’’ LF woofer 1 x 18’’ Neodymium LF woofer



Connectors: 2 x NL4 (Cardioid front connector on demand)

Physical data

W x H x D 546 x 680/744 x 719 mm. 546 x 680/744 x 719 mm.

Weight (net) 51 kg. 70 kg. 44 kg. 63 kg.


Side panels: - Steel rigging panels - Steel rigging panels



Rigging components - High grade steel - High grade steel


1515151515

SB-15 FEATURES

DESCRIPTION

• 15-inch long excursion subwoofer system • Cooling technology ltransducers • Cardioid connector on demand • 1000 W AES // 136 dB peak

SB-15 is our ultra-compact subwoofer system. A cooling technology long excursion driver are mounted in an efficient horn-loaded subwoofer. Fully designed to reproduce clean, musical low frequency information on a ultra-compact size. The 1000 W AES driver employs a 4” voice coil for exceptional power handling, with a dual-spider suspension system for extra stability even under extreme excursion (136 dB-peak). The system is constructed with nordic phenolic birch plywood and all necessary reinforcements, resulting in a surprisingly clean response and mechanical noise free. Each unit incorporates slots that allow stacking units easely. SB-15H are the same system but incorporating the flying hardware manufactured with the highest quality and maximum strength steel.

Technical data SB-15 SB-15H

Usable bandwidth (-10dB) 38 Hz - 170Hz





Connectors: 2 x NL4

Physical data

W x H x D 450 x 500 x 660 mm.

Weight (net) 32 Kg. 47 kg.


Side panels: - Steel rigging panels



Rigging components - High grade steel


1616161616

SB-112H FEATURES

DESCRIPTION

SB-112H is our ultra-lightweight subwoofer system. Mounts a long excursion transducer with cooling technology in a highly efficient bass-reflex enclosure. Fully designed to reproduce the low frequencies musically pleasing in an exceptionally small size. The 700 W AES transducer uses a 4-inch coil for an exceptional performance, with a double-spider suspension system for additional stability even in extreme excursion conditions (134 dB peak). The system is built with Nordic phenolic birch plywood and all the necessary reinforcements, resulting in a terrific clean and free of mechanical noise. It incorporates flying hardware manufactured with steel of the highest quality and resistance, offering the possibility of making subwoofer arrays, or it can be combined with the STAR-106 system for interior or small format line-array systems.

Technical data SB-112H

Usable bandwidth (-10dB) 38 - 200Hz





Connectors: 2 x NL4



Physical data

W x H x D 495 x 364 x 415 mm

Weight (net) 29 kg.





Rigging components High grade steel with anti-corrosion coating


• 12-inch subwoofer system • Incorporated flying hardware • Extremely compact size • 700 W AES // 134 dB-peak

STAR SERIES

CONSTANT EVOLUTION

1818181818

STAR-110/110P FEATURES

DESCRIPTION

STAR-110 is a reinforcement unit for multiple applications, clubs, theaters, schools, etc. It can work as a module of array system, as a floor monitor and mounted above a subwoofer unit. The system incorporates a 10-inch cooling technology transducer and 1-inch exit compression driver with 1.75- inch voice coil coupled to 90ºx40º rotable horn. STAR-110P incorporates 3x1-inch HF units for the array applications. The simple angulations mechanism can be removed by removing the pins that hold it. It incorporates a handle for transport and 35 mm socket pole to attach a lifting support. The front of each cabinet is protected with a steel grid covered with a filter. Units are constructed with waterproof birch plywood with a black WARNEX coating.

• 2-way multi-function system • Compact design • Steel flying hardware • Clear response for install aplications • 600 W AES // 134 dB peak

Technical data STAR-110 STAR-110P



Horizontal coverage angle (-6 dB) 90° 90°

Vertical coverage angle (-6 dB) 40° 40°

Transducers LF: 10’’ LF woofer 10’’ LF woofer

Transducers HF: 1’’ compression driver with 1.75''

coice coil 3 x 1’’ HF unit



Connectors: 2 x NL4



Inter-enclosure angles (degrees): 0 / 2.5 / 5 / 7.5 / 10 / 12.5 / 15

Physical data

W x H x D: 570 x 305 x 290 mm.








1919191919

STAR-106

Technical data STAR-106





Transducers LF: 1 x 6,5’’ LF woofer




Connectors: 2 x NL4




Physical data

W x H x D: 500 x 190 x 150 mm.

Weight (net): 8 kg.







FEATURES

DESCRIPTION

STAR-106 is our most compact and light-weight line source unit. This 2-way full range cabinet is used for multiple applications, including fixed installation and also touring. The efficiency of the HF units allows greater vertical dispersion without sacrificing the presence of high frequencies in the far field. The cabinet offers a wide range of possibilities and is an excellent choice for small sound reinforcement applications. The low frequencies can be reinforced with the SB-15 subwoofer. The mechanical design of STAR-106 enables vertical splay angles between units of 0º to 10º without use flying pins, allowing an easy and quickly deployment with just one person. The rigging frame use the same rigging system like the cabinets.

• 2-way ultra-compact line array • Light-weight 8 kg cabinet • Steel flying hardware • Clear response for install aplications • 200 W AES // 124 dB peak

2020202020

AX-110 FEATURES

DESCRIPTION

AX-110 is a reinforcement unit for multiple applications, clubs, theaters, schools, etc. It can work as a module of array system, as a floor monitor or mounted above a subwoofer unit. A very efficient coaxial unit are mounted with a 10-inch loudspeaker for the low-mid range and a 1.75-inch voice coil compression driver for high frequencies. The simple angulations mechanism can be removed by removing the pins that hold it. It incorporates a handle for transport and a 35mm pole socket to attach a lifting support. The front of each cabinet is protected with a steel grid covered with a filter. Units are constructed with waterproof birch plywood with a black WARNEX coating.

• 2-way multi-function system • Compact design • Stell flying hardware • Clear response for install aplications • 300 W AES // 128 dB peak

Technical data AX-110



Coaxial coverage angle (-6 dB) 90°

Coaxial Transducer LF/HF 10” LF woofer / 1.75” Compression driver



Connectors: 2 x NL4



Inter-enclosure angles (degrees): 0 / 2.5 / 5 / 7.5 / 10 / 12.5 / 15

Physical data

W x H x D: 290 x 310 x 340 mm.








MULTY SERIES

CONSTANT EVOLUTION

2222222222

MULTY 15F/ND FEATURES

DESCRIPTION

MULTY 15ND is our multi-purpose PA system. The cabinet offers a wide range of possibilities for permanent and mobile installations and is an excellent choice for small to medium sound reinforcement applications. Low frequencies can be reinforced with SB-18 or SB-218 subwoofer. The 2-way speaker cabinet is powered by two external amplifier channels and mounts a 15-inch low-mid frequency driver and one 1.4-inch high frequency compression driver with 2.9-inch voice coil. The MULTY 15F is the same version but with ferrite transducers. The system incorporates inserts to attach flying mechanisms and a 35 mm socket pole is incorporated to mount with a loudspeaker stand.

• 2-way bi-amp system • High performance on a compact size • Deep response for multi-propose aplications • Steel flying hardware on demand • 1000 W AES // 139 dB peak

Technical data MULTY 15F MULTY 15ND

Usable bandwidth (-10dB) 50 - 20.000Hz. 48 - 20.000Hz.


Horizontal coverage angle (-6 dB) 80° 80°

Vertical coverage angle (-6 dB) 50° 50°

Transducers LF: 15’’ LF woofer 15’’ Neodymium LF woofer

Transducers HF: 1.4’’ compression driver with 2.9''

voice coil 1.4’’ compression driver with 2.9''

voice coil



Connectors: 2 x NL4

Physical data

W x H x D: 450 x 730 x 580 mm

Weight (net): 26 kg 26 kg




Rigging components (on demand): High grade steel with anti-corrosion coating


2323232323

MULTY 12F

Technical data MULTY 12F



Horizontal coverage angle (-6 dB) 90°

Vertical coverage angle (-6 dB) 40°

Transducers LF: 12’’ LF woofer

Transducers HF: 1’’ compression driver with 1.75'' voice coil



Connectors: 2 x NL4

Physical data

W x H x D: 360 x 610 x 460 mm

Weight (net): 23 kg




Rigging components (on demand): High grade steel with anti-corrosion coating


FEATURES

DESCRIPTION

MULTY 12F is our multi-purpose PA system. The cabinet offers a wide range of possibilities for permanent and mobile installations and is an excellent choice for small to medium sound reinforcement applications. Low frequencies can be reinforced with SB-18 or SB-218 subwoofer. The 2-way speaker cabinet is powered by a single external amplifier channel and mounts a 12-inch low-mid frequency driver and one 1-inch high frequency compression driver with 1.75-inch voice coil. The system incorporates inserts to attach flying mechanisms and a 35 mm socket pole is incorporated to mount with a loudspeaker stand.

• 2-way bi-amp system • Compact multi-purpose PA • Clean response for medium-small aplications • Steel flying hardware on demand • 600 W AES // 135 dB peak

PX SERIES

CONSTANT EVOLUTION

2525252525

PX-115/115R/115S FEATURES

DESCRIPTION

PX-115 family is the multi-purpose monitor system for applications of wedge or side-fill, and other applications such as front-fill or small PA. In its wedge application, it allows angles of 30 and 60 degrees to perfectly accommodate the listening position PX-115S incorporates a 15-inch transducer with cooling technology and a 2.9-inch voice coil compression driver with 1.4-inch throat, coupled to a narrow dispersion rotable horn. PX-115 and PX-115R mount a 1-inch throat compression driver with 1.75-inch voice coil coupled to a rotable horn. This systems can be flown with optional rigging hardware (HPVPX115). The mechanism allows the configuration of two units in a cluster as a point source with a coverage of 80º vertical and 90º horizontal, as well can be used as a suspended vertical point source and can be angled from 20º up to 90º. A 35 mm pole socket is incorporated to mount on a loudspeaker stand.

• 2-way monitor system • 2-position wedge (30° and 60°) • Clear response for voice and musical reproduction • Steel flying hardware for fixed install • 900 W AES // 137 dB peak

Technical data PX-115 PX-115R PX-115S

Usable bandwidth (-10dB) 55 - 20.000Hz 55 - 20.000Hz 55 - 20.000Hz

Maximum SPL (*) 135 dB (preset) 137 dB (preset) 137 dB (preset)

Horizontal coverage angle: 90° (-6 dB points) 90° (-6 dB points) 80° (-6 dB points)

Vertical coverage angle: 40° (-6 dB points) 40° (-6 dB points) 50° (-6 dB points)

Transducers LF: 15’’ LF woofer 15’’ LF woofer 15’’ LF woofer

Transducers HF: 1'' Compression driver

1.75'' Voice coil 1'' Compression driver

1.75'' Voice coil 1,4'' Compression driver

2,9'' Voice coil


AES power handling: 600 W 900 W 900 W

Connectors: 2 x NL4

Physical data

W x H x D: 450 x 730 x 400 mm.

Weight (net): 25 kg. 24 kg. 24 kg.




Rigging components: Multi-point high grade steel cluster hardware

Cluster angles (degrees): 20 / 30 / 40 / 50 / 58 / 66 / 74 / 82 / 90



2626262626

PX-112R FEATURES

DESCRIPTION

PX-112R is the multi-purpose 12-inch monitor system for wedge or side-fill applications, and other applications such as front-fill or small PA. In its wedge application, it allows angles of 30 and 60 degrees to perfectly accommodate the listening position. PX-112R incorporates a 12-inch transducer with cooling technology and a 1-inch throat compression driver with 1.75-inch voice coil coupled to a rotatable horn. This systems can be flown with optional rigging hardware (HPVPX112). The mechanism allows the configuration of two units in a cluster as a point source with a coverage of 80º vertical and 90º horizontal, as well can be used as a suspended vertical point source and can be angled from 20º up to 90º. A 35 mm pole socket is incorporated to mount on a loudspeaker stand.

• 2-way monitor system • 2-position wedge (30° and 60°) • Clear response for voice and musical reproduction • Steel flying hardware for fixed install • 600 W AES // 135 dB-peak

Technical data PX-112R



Horizontal coverage angle: 90° (-6 dB points)

Vertical coverage angle: 40° (-6 dB points)

Transducers LF: 12’’ LF woofer

Transducers HF: 1'' Compression driver. 1.75'' Voice coil



Connectors: 2 x NL4

Physical data

W x H x D: 360 x 610 x 330 mm.





Rigging components: Multi-point high grade steel cluster hardware

Cluster angles (degrees): 20 / 30 / 40 / 50 / 58 / 66 / 74 / 82 / 90



AM POWER AMPLIFIER

CONSTANT EVOLUTION

2828282828

V series

TSA introduces this new generation of professional touring amplifiers based on the field proven QuantaPulse™ Technology: V Series. These new devices feature two or four channel models, ready for rough handling in the touring world. For this purpose, V Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status. This together with oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution, full digital control from LCD display on the front panel… Resulting in: just power, reliability and robustness for your touring gigs!

DESCRIPTION

Continuos Power V6000 V9000 V12000 V9004 V9044 V12004 V12044

2 ohm 2x3025W 2x4400W 2x5900W 4x2260W - 4x3025W -

4 ohm 2x1600W 2x2300W 2x3100W 4x1150W 4x2200W 4x1600W 4x2950W

8 ohm 2x820W 2x1200W 2x1600W 4x600W 4x1150W 4x820W 4x1550W

Bridge 4 ohm 1x6050W 1x8800W 1x11800W 2x4520W - 2x6050W -

Bridge 8 ohm 1x3200W 1x4600W 1x6200W 2x2300W 2x4400W 2x3200W 2x5900W

High Z

70Vrms / 100Vpeak - - - 4x2260W - - -

100Vrms / 140Vpeak - 2x4400W 2x5900W - 4x2200W - 4x2950W

2929292929

S series

Modern power amplifiers have developed into light, powerful, versatile, rugged and reliable instruments designed to keep working in the most arduous conditions. At TSA, we have an enviable reputation in the industry, and continue to stay at the forefront of audio design by offering our many customers all those concepts combined with the following major advantage: a sensible price level for our pedigree products.

This is made possible by our constant development of state-of-the-art designs, together with meticulous component selection and rigorous supervision of assembly quality.

The S Series amplifiers distils all these features to fulfill all your needs, whether you’re starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you’ll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep.

DESCRIPTION

Output Power S1500 S2000 S3000 S4000 S6000 S3004 S4004 S4044 S6004 S6044

2 ohm 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -

4 ohm 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W

8 ohm 2x340W 2x500W 2x680W 2x900W 2x1540W 4x320W 4x510W 4x830W 4x770W 4x1360W

Bridge 4 ohm 1x1950W 1x2720W 1x4120W 1x4920W 1x8450W 2x1780W 2x2340W - 2x4160W -

Bridge 8 ohm 1x1220W 1x1760W 1x2480W 1x3200W 1x5200W 2x1160W 2x1640W 2x2460W 2x2560W 2x4220W

High Z

70Vrms/100Vpeak - - 2x1240W 2x2460W - - - 4x1200W 4x1500W -

100Vrms/140Vpeak 1x1140W 1x2500W - - 2x2800W 2x1100W 2x2000W - - 4x1700W

3030303030

ZETTA series

The ZETTA Series, is the result of an in depth study, in order to reach the best compromise between economy and performances, taking advantage of latest improvements in automated mixed surface mount and through hole electronic assembly.

ZETTA Series are a project based on an up-side-down mono-block approach offering an all-in-one power module that contains the entire amplifier assembly. Simplicity and effectiveness run hand by hand through the entire design to obtain an effectively skilled and workable product.

The last generation QuantaPulse™ switching power supply allows to reach a new level of refined sensing and control of the power flow.

The cost-effective ZETTA Series amplifiers are packed with solid and convincing arguments for the professionals researching quality, reliability and value.

Output Power Z210 Z215 Z220 Z236 Z420 Z430 Z440

2 Ω 2x500W 2x750W 2x1000W 2x1800W 4x500W 4x750W 4x1000W



Bridge 4 Ω 1x1000W 1x1500W 1x2000W 1x3600W 2x1000W 2x1500W 2x2000W

Bridge 8 Ω 1x800W 1x1400W 1x2000W 1x3500W 2x800W 2x1400W 2x2000W

High Z

70Vrms / 100Vpeak 1x900W - 2x700W - 2x900W - 4x700W

100Vrms / 140Vpeak - 1x1400W - - - 2x1400W -

DESCRIPTION

3131313131

MDi series

MDi Series is the newest solution for fixed installations, where state-of-the-art amplification technology has been used to manage acoustic systems in the most efficient and greenest way possible, without diminishing quality of sound and dynamics that have always typified our amplifiers.

A new generation of QuantaPulseTM switching mode power supplies with Power Factor Correction to improve efficiency, with a schematic thought to give a very high capacity of instantaneous power, together with very evolved high efficiency audio modules in class D with an excellent quality of sound, are the basis on which has developed this new series that is capable of offering the most optimal solution to the very exigent fixed-installations market.

Output Power MDi2-1K4 MDi2-2K7 MDi2-6K MDi4-2K4 MDi4-6K MDi4-12K MDi8-2K7 MDi8-6K

4 ohm 2x700W 2x1350W 2x3000W 4x610W 4x1500W 4x3000W 8x340W 8x750W

8 ohm 2x375W 2x900W 2x1500W 4x350W 4x800W 4x1500W 8x225W 8x400W

Puente 8 ohm 1x1400W - - 2x1220W - - 4x680W 4x1500W

High Z

70Vrms/100Vpeak - 2x1350W - - 4x1500W - 4x680W -

100Vrms/140Vpeak 1x1400W - 2x3000W 2x1200W - 4x3000W - 4x1500W

100Vrms / 140Vpeak - 1x1400W - - - 2x1400W -

DESCRIPTION

3232323232

TSA Polígono Alcodar / Carrer Dels musics nº 3

46701 Gandia– Valencia (Spain) Tl: (+34) 96 286 8985 [email protected]

www.tsa-sound.com

Catalogue 2018 - TSA SOUND

Documents

Transcript of Catalogue 2018 - TSA SOUND