2011 Catalogue€¦ · Title: 2011 Catalogue Created Date: 11/22/2011 3:22:25 PM
Catalogue 2011
Transcript of Catalogue 2011
pages
FLAGPOLES PERMANENTLY FIXED IN THE GROUND
… . AND WHAT ABOUT AN EVENT ADVERT ?
ALUMINUM SECTIONAL PROFILE
MOBILE FLAGPOLES
WALL MOUNTED FLAGPOLE? WHY NOT…WALL MOUNTED FLAGPOLES
PROFILE OF SWAGE FLAGPOLE
PROFILE OF FIBERGLASS CONICAL FLAGPOLE
LARGE FORMAT GRAPHICS? NOTHING IS AS SIMPLE AS THATFLAG / BANNER / DECORATIVE TISSUE
CYLINDRICAL PROFILE WITH A GAP
BANNER FRAME
BANNER SYSTEMADVERTISING SAIL
PROFILE OF ALUMINUM CONICAL FLAGPOLEPROFILE AND HEIGHT OF FLAGPOLE
STANDARD / SUPERBANNER / SUPERWINDTRACKER
Looking for a highly visible and effective advertising?
In the world full of colorful advertisements,
flags on flagpoles (which can have an advertising
area of many square meters)
will enable you to be extraordinary.
We would like to present to you our solutions
for successful advertising.
The flag is of course most notably the symbol of a nation,
but it is becoming more and more common
as in important advertising medium.
In this catalogue we would like to present to
you several ways of using flags in your advertising.
Here you will find not only flagpoles but also
other interesting solutions in the advertising field.
FLAGPO
LES PERM
ANEN
TLY FIXED IN
THE GRO
UND
SUPER- it's a flagpole with an internal halyard system - this solution eliminates the noise which can be caused by an external rope hitting the flagpole. Hoisting of the flag is done by the internal rope. It secures the flag against theft. At the bottom of the flag there is a flag weight which stretches the flag. The flag display depends on gusts of wind.
STANDARD-The flag is hoisted by an external rope tied off at a belaying cleat which is 1,5m above the ground. The flag display depends on gusts of wind.
Trust the nature...The windworks for You
BELAYING CLEAT
VISIBLE ROPE
INTERNAL CLEAT
FLAG WEIGHT
FLAGPO
LES PERM
ANEN
TLY FIXED IN
THE GRO
UND
You can find the profiles and heights of these flagpoles on pages 4 to 8
Flag visible at all times
FLAG WEIGHT
FLAG WEIGHT
BANNER ARM
WINDTRACKER ARM
INTERNAL CLEAT
BANNER- flagpole with a permanent rotating arm.
The horizontal arm revolves around
the flagpole because of the wind.
It's a flagpole without a halyard system
so to change the flag You should
put the flagpole down. This kind of flagpole
perfectly displaysYour logo on the flag because it is always
outstretched.
SUPERWINDTRACKER-(a combination
of Banner and Super flagpole)
it's a flagpole with an internal halyard systemand a hoistable horizontal arm.
This version allows flag changing without
the need to take down the flagpole
because You can hoist the arm with the flag. This kind of flagpole
perfectly displaysYour logo on the flag because it is always
outstretched.
CHOOSE THE BEST PRO
FILE AND HEIGHT ACCORD
ING TO YOUR NEEDS
height: 5-15 m
PROFILE OF ALUMINUM CONICAL FLAGPOLE
Aluminum anodized conical flagpole is made of one aluminum tapered tube. To make the flagpoles more aesthetic and durable the aluminum tubes are anodized. The basic advantages of this treatment are: no need to maintain the flagpole which is especially crucial in areas near salty water and attractive appearance. Moreover, the weight of a flagpole made of aluminum is only 1/3 of the weight of a flagpole made of steel.
ALUMINUMCONICALTUBE
visible from a great distancehighly durableprestigious shape and lookone piece constructionhigh quality aluminum alloyanodized surfacelacquering possibilty
CHARACTERISTIC FEATURESAND ADVANTAGES
GROUND SLEEVE
FOR EASE OF USE AND INCREASED PRESTIGE
mechanisms making the flag hoisting easier
wide range of finials
RAL palette colors available
flagpole turns with wind direction
HINGED BASE PLATEWITH A ROTATING HINGED BASE PLATE
WITH A MOVABLE BASE
IDEAS FOR FLAGPOLE INSTALLATION
CHOOSE THE BEST PRO
FILE AND HEIGHT ACCORD
ING TO YOUR NEEDS
height: 6-22 m
IDEAS FOR FLAGPOLE INSTALLATION
PROFILE OF FIBERGLASS CONICAL FLAGPOLE
Fiberglass conical flagpole is made of polyester laminateIt's a single-piece tapered flagpole. The unique structure of the reinforcement (using tighly woven fabric) results in superior mechanical prosperities based on glass fiber and epoxy resin.
mechanisms making the flag hoisting easier
wide range of finials
RAL palette colors available
flagpole turns with wind direction
visible from a great distancehighly durableprestigious shape and lookone piece constructionhigh quality fiberglass matand epoxy resins white surface, resistant to UV light(color doesn't yellow)lacquering possibilty
FIBERGLASS TUBE
FOR EASE OF USE AND INCREASED PRESTIGE
CHARACTERISTIC FEATURESAND ADVANTAGES
GROUND SLEEVE HINGED BASE PLATE WITH A MOVABLE BASE
CHOOSE THE BEST PRO
FILE AND HEIGHT ACCORD
ING TO YOUR NEEDS
height: 5-12 m
CHARACTERISTIC FEATURESAND ADVANTAGES
GROUND SLEEVE
FOR EASE OF USE AND INCREASED PRESTIGE
IDEAS FOR FLAGPOLE INSTALLATION
HINGED BASE PLATE WITH A MOVABLE BASE
hoistable arm permanently exhibiting the flag
wide range of finials
RAL palette colors available
rope placed inside the profilemechanism for hosting the flag in standardprestigious shape and looksingle-element constructionsame diameter at the whole height of the flagpolehigh quality aluminum alloyanodized surfacelacquering possibilty
Flagpoles of Exclusive type are single-element cylindrical aluminum flagpoles with a profile which allows the rope and clips to fit inside the profile.
CYLINDRICAL PROFILE WITH HALYARD SYSTEM IN A SLOT
AVAILABLE IN VERSION SUPER AND IN VERSION WITH HOISTABLE ARM
SECTIONFLAGPOLE TUBE
CHOOSE THE BEST PRO
FILE AND HEIGHT ACCORD
ING TO YOUR NEEDS
height: 5-15 m
CHARACTERISTIC FEATURESAND ADVANTAGES
IDEAS FOR FLAGPOLE INSTALLATION
mechanisms making the flag hoisting easier
wide range of finials
RAL palette colors available
GROUND SLEEVE HINGED BASE PLATE WITH A MOVABLE BASE
low weight of the flagpolelow transport costs (the longest element is about 4m) high quality aluminum alloyanodized surfacelacquering possibilty
easy transportation – sectional construction
SECTIONAL FLAGPOLE TUBE
Sectional flagpole made of two or more cylindrical aluminum profiles of different diameters, joined together by special reduction sleeves. The number and diameter of sections depends on the height of the flagpole.
REDUCTIONSLEEVE
ALUMINUM SECTIONAL PROFILE
FOR EASE OF USE AND INCREASED PRESTIGE
CHOOSE THE BEST PRO
FILE AND HEIGHT ACCORD
ING TO YOUR NEEDS
height: 3 - 6 m
CHARACTERISTIC FEATURESAND ADVANTAGES
FOR EASE OF USE AND INCREASED PRESTIGE
IDEAS FOR FLAGPOLE INSTALLATION
wide range of bases to be used indoor and outdoors
RAL palette color available
low weight of the flagpolelow transport costs (the longest element is about 2m) high quality aluminum alloyanodized surfacelacquering possibilty
easy transportation – sectional construction
SWAGE FLAGPOLE TUBE
perfect solution for events (see page no 10)
Swage flagpole is made of one or more cylindrical aluminum profiles -same diameter throughout the whole height of the flagpole. They are joined together by putting one tube into another. The upper part of the tube is narrowed so that its diameter after narrowing goes into the tube of the next segment. The end of next segment is also narrowed so that one can add another element and extend the flagpole up to 6,5 m height.
PROFILE OF SWAGE FLAGPOLE
.
INTO THE GROUND INTO THE SNOW
FOR CAR TIREFOR INTERNAL
USAGE AND FLAT SURFACES
FOR INTERNAL USAGE AND FLAT
SURFACES
TO USE ON CONCRETE
WALL M
OUNTED FLAGPO
LE? WHY NOT…SINGLE
Unique long distance - visible form of advertising
TRIPLEDOUBLE
INCLINATION ANGLE 75 DEGREES
INCLINATION ANGLE 60 DEGREES
INCLINATION ANGLE 45 DEGREES
WALL MOUNTED FLAGPOLES O 30mm, O 50mm UP TO 3m LONG
WALL MOUNTED FLAGPOLES O 30mm, O 50mm UP TO 3m LONG
WALL MOUNTED FLAGPOLES UP TO 8m LONG, INCLINATION ANGLE 30 DEGREES OR 0 DEGREES
WALL MOUNTED FLAGPOLES O 80mm UP TO 3,7m LONG
WALL MOUNTED FLAGPOLES UP TO 6m LONG, INCLINATION ANGLE 75, 60 OR 45 DEGREES
WALL MOUNTED FLAGPOLES - OTHER OPTIONS
Wall mounted flagpoles are designed for installation on building elevations. They are a great solution for advertising where it is not possibility to install the flagpole in the ground due to lack of free space in front of the building. Moreover, it is a solution which provides You with an interesting and visible display.
WALL MOUNTED FLAGPOLES
… AND W
HAT ABO
UT AN EVEN
T ADVERT ?
FOR A PRO
MOTION
Quick to install, cheap
and movable display,
which you can put
in the boot
of Your car...
IN FRO
NT OF A STO
RE
ON THE HILLSIDE
FOR TH
E BEACH
Light construction flagpole, small size after packing, wide range of bases to choose from – all these features allow You to use mobile flagpoles anytime, anywhere.
MOBILE FLAGPOLES
TELESCOPIC FLAGPOLEALUMAX WINDERS
THINKING ABOUT DIFFERENT PLACES OF INSTALLATION – DIFFERENT BASES
swaged flagpoles are also a good solution for an event – see page 13
INTO THE GROUND
FOR FLAT SURFACES
FOR CAR TIRE FOR INDOORUSE AND FLAT
SURFACES
Water pou
ches
TO USE ON CONCRETE
SCREWED INTO THE GROUND
SCREWED INTO THE SNOW
Plastic base
Steel b
ase
Ham
mered
Roun
d steel b
ase
FOR INDOORUSE AND FLAT
SURFACES
Squa
re steel base
Hea
rt sha
ped ba
se
BANNER FRAME
Frame is made of light anodized tubes. Due to telescopic tubes which length can be adjusted, You can adopt the Banner Frame to the dimensions of Your banner. It is ideal for using on the streets because it gives the opportunity of two – sided advertisement.
Big advertising space for small money!
light constructionlow transport cost (can be folded)easy to install and reinstalllow cost advertising spacelow cost in comparison to alternative productssimple change of the advertisement bannercan easily adjust the frame configurationcan adopt the frame size to the banner size
Need another size?
– ask our consultant
We advice,
produce,
install…
… AND W
HAT ABO
UT AN EVEN
T ADVERT ?
VIRTUES OF OUR BANNER FRAME:
… AND W
HAT ABO
UT AN EVEN
T ADVERT ?
Sail advertising system the newest product on the Outdoor market. The result of using high quality aluminum and simple construction is a product that gives you 15m2 advertising space in the shape of a sail. The aluminum tube on which the construction is based can be permanently fixed in the ground, or optionally it can be delivered with a portable base on which You have to put some extra ballast like bricks etc. In order to make the construction more stable we use stay ropes (ropes which are straining the construction. They are fixed to the top of the pole and to the pegs which are hammered to the ground symmetrically around the pole).
ADVERTISING SAIL
of advertisingsurface
Use the existing infrastructure.
BANNER SYSTEM is a solution which allows you
to display Your advert on lighting columns
Installation of horizontal arms on the lamp post
gives you huge and effective advertising space
Virtues of BANNER SYSTEM:
- The length of the arm allows you
to use 60cm width graphic
- The size of the advertising carrier
we advise is 60cm x 120 cm,
- The installation on the post is very simple
and requires only commonly used tools
- Changing the banner is the easiest
and fastest ever
- It requires only minimal maintenance
- It can resist winds up to force 7 Beaufort (17,1 m/s)
OPTIONS
…. AND W
HAT ABO
UT AN EVEN
T ADVERT ?
We haveidea
for You
LARG
E FO
RMAT GRA
PHICS? NOTH
ING IS
AS SIMPLE AS TH
AT
FLAG, BANNER, DECORATIVE TISSUE
We offer them in 7 standard sizes, from 15cm x 24cm to 150cm x 240 cm. This is the right address, we can supply national flags of all countries.
Do You need a NATIONAL FLAG?
You can display them wherever You like; they give fast and readable information about Your company or brand; they are a prestigious solution because of their historic heritage; they are a moving advert and so attract attention among other stable adverts and the environment. We can make any flag You need.
Advertising flags have now become a basic tool for outdoor promotion and advertising. Their popularity stems from their advantages:
Flag is also a perfect advertising media.
DECORATIVE TEXTILES printed by a color sublimation are designed for indoor use. Printing on such textiles is a great way to promote a company, brand or product. Decorative textiles are used at trade fairs, in exhibitions, indoor arrangements, decorations and stage designs. Characteristic feature of a graphic printed on a decorative textile is a good quality and the depth of the color. The textiles are printed according in CMYK colors.
Are you interested in the banner frame? We will also supply you with the banner.
BANNERS, because of their durability, are used especially in the large format exhibitions, such as: on buildings, car tarpaulins, over streets, by passages, on fences. The printing on the banner can be in any size and in full CMYK color. The finish dependson the proposed installation.
Are you thinking about a decoration, stage design? Use a high quality decorative textile.
We will printon what Youwant...
Based on our long – term experience we offer flags which meet all your expectations regarding esthetics
and durability. Our flags can be printed in both methods: screen and digital printing.
To satisfy our customers' growing needs
ALUMAST S.A. has from the outset made
the quality and safety in use of its flagpoles
its most important objective.
In cooperation with the Central Mining Institute we developed technology for producing fiberglass poles.
Collaborating with the Institute for Ferrous Metallurgy and using a grant from
the State Committee for Scientific Research we built a device for narrowing aluminum tubes.
ALUMAST S.A. also uses studies carried out for us by the Silesian University of Technology
concerning technical documentation for the construction
of flagpoles and foundations. Moreover, in cooperation
with the Institute of Aviation in Warsaw we managed to work out
a detailed wind norm for flagpoles.