Catalogo Silex Cables RF50ohm y Conectores Coaxiales 50ohm

55
Página | 1

Transcript of Catalogo Silex Cables RF50ohm y Conectores Coaxiales 50ohm

Página | 1

Página | 2

Table of Contents: Coaxial Cable Series

Coaxial RF 50 Cupper and Aluminum

Cooper – Pag.5 Aluminum – Pag.13 Jumpers – Pag.19 Jumpers Low PIM

Grounding Kits–Pag.23 Arrestors – Pag. 52 Clamps – Pag.24 Tools – Pag. 53

Connect 1/2"–Pag.31 Superflex 1/2"–Pag.37 Connect 7/8"–Pag.43 Connect 1-5/8"–Pag.48

Página | 3

Página | 4

Coaxial Cable - Comparison of different cable types

The product range includes high- frequency coaxial connectors and cables, RF- test & measurement products, as well as infrastructure site solutions, connectors, cables or accessories for radio base stations.

Image Overview Type Section Inner conductor Outer conductor Jacket options Order number

Superflexible Cables SilexFlex

1/4" Copper-Clad Aluminum Wire Corrugated Copper Tube

PE LCF14HR

HL-FR-Z LCF14HRZ

3/8" Copper-Clad Aluminum Wire Corrugated Copper Tube PE LCF38HR

HL-FR-Z LCF38HRZ

1/2" Copper-Clad Aluminum Wire Corrugated Copper Tube PE LCF12HR

HL-FR-Z LCF12HRZ

Flexible Cooper Cables SilexStd

1/4" Copper-Clad Aluminum Wire Corrugated Copper Tube PE LCF14STD

HL-FR-Z LCF14STDZ

3/8" Copper-Clad Aluminum Wire Corrugated Copper Tube PE LCF38STD

HL-FR-Z LCF38STDZ

1/2" Copper-Clad Aluminum Wire Corrugated Copper Tube PE LCF12STD

HL-FR-Z LCF12STDZ

5/8" Smooth Copper Tube Corrugated Copper Tube PE LCF58STD

HL-FR-Z LCF58STDZ

7/8" Smooth Copper Tube Corrugated Copper Tube PE LCF78STD

HL-FR-Z LCF78STDZ

1-1/4" Smooth Copper Tube Corrugated Copper Tube PE LCF114STD

HL-FR-Z LCF114STDZ

1-5/8" Helical Copper Tube Corrugated Copper Tube PE LCF158STD

HL-FR-Z LCF158STDZ

2-1/4" Helical Copper Tube Corrugated Copper Tube PE LCF214STD

HL-FR-Z LCF214STDZ

Flexible Aluminum Cables SilexStl

1/2" Copper-Clad Aluminum Wire Corrugated Aluminium Tube

PE LCF12STL

HL-FR-Z LCF12STLZ

7/8" Smooth Copper Tube Corrugated Aluminium Tube

PE LCF78STL

HL-FR-Z LCF78STLZ

1-1/4" Smooth Copper Tube Corrugated Aluminium Tube

PE LCF114STL

HL-FR-Z LCF114STLZ

1-5/8" Helical Copper Tube Corrugated Aluminium Tube

PE LCF158STL

HL-FR-Z LCF158STLZ

Jacket: PE Standard Polyethylene, PE, Metalhydroxite Filling, UV resistant PE jacket, halogen free according to IEC 60754 Jacket: HL-FR-Z Halogen Free & Fire resistant (Z) Test on flammability of single cables Test in accordance with: IEC 60332-1-2 EN 60332-1-2 Test on flammability of cable bundles Test in accordance with: IEC 60332-3 Cat. C EN 50266-2-4 Cat. C Test on smoke density Test in accordance with: IEC 61034-1 and -2 EN 61034-1 and -2 Test on corrosive gas emissions Test in accordance with: IEC 60754-2 EN 50267-2-2 Test on insulation integrity Test in accordance with: IEC 60331-23 VDE 0472 Part 814

Página | 5

General

LCF12STD(Z) LCF12STD(Z), Silexstd ® RF Low Density Foam Coaxial Cable 1/2", corrugated copper, 1/2 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z). Type HCAAY(Z)-50-12

Construction Materials Inner Conductor Copper-Clad Aluminum Wire Dielectric Physical Foam Polyethylene Outer Conductor Corrugated Copper Tube Jacket Black PE or Low Smoke Halogen-free Fire-retardant

Physical Dimensions Inner Conductor Diameter 4.80 mm Dielectric Diameter 12.30 mm Outer Conductor Diameter 13.80 mm Diameter Over Jacket 15.70 mm

Mechanical Specifications Minimum Bending Radius Single Bending 50 mm Repeated Bending 125 mm Minimum Number of Bends 15 Tensile Strength 1100 N (247 lb)

Electrical Specifications Capacitance 76.0 pF/m (23.2 pF/ft) Impedance 50 ± 1 O Velocity 88% RF Peak Voltage 1.60 kV Peak Power Rating 40 kW Cut-o" Frequency 18.8 GHz Shielding E"ectiveness>10MHz >120 dB Insulation resistance 5000M Ω-Km VSWR 0.8~1.0 GHz ≤1.10 1.7~2.2 GHz ≤1.10 2.2~2.7 GHz ≤1.13

Página | 6

Environmental Specifications Storage Temperature -55 ˚C ~ +85 ˚C Installation Temperature -40 ˚C ~ +60 ˚C Operation Temperature -55 ˚C ~ +85 ˚C

Perforance - Attenuation

Frequency Attenuation Attenuation Average MHz dB/100 m dB/100 ft Power Rating (kW)

100,00 3,42 1,04 2,23 150,00 4,22 1,29 1,81 200,00 4,90 1,49 1,56 280,00 6,00 1,83 1,27 450,00 7,50 2,29 1,02 800,00 10,20 3,11 0,75 900,00 10,90 3,32 0,71

1000,00 11,60 3,54 0,67 1500,00 14,40 4,39 0,53 1800,00 16,00 4,88 0,48 2000,00 17,00 5,18 0,46 2200,00 17,90 5,46 0,43 2400,00 18,70 5,70 0,42 2500,00 19,30 5,88 0,41 3000,00 21,30 6,49 0,37

Standard Conditions For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F) For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F) Inner Conductor temperature 100 °C (212 °F). No solar loading. Maximum attenuation value shall be 105% of the nominal attenuation value.

Página | 7

General

LCF12HR(Z) LCF12HR(Z), Silexflex ® RF SuperFlexible Foam Coaxial Cable 1/2", corrugated copper, 1/2 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z). Type HRCAY(Z)-50-9

Construction Materials Inner Conductor Copper-Clad Aluminum Wire Dielectric Physical Foam Polyethylene Outer Conductor Corrugated Copper Tube Jacket Black PE or Low Smoke Halogen-free Fire-retardant

Physical Dimensions Inner Conductor Diameter 3.60 mm Dielectric Diameter 8.70 mm Outer Conductor Diameter 12.00 mm Diameter Over Jacket 13.30 mm

Mechanical Specifications Minimum Bending Radius Single Bending 15 mm Repeated Bending 30 mm Minimum Number of Bends 15 Tensile Strength 650 N (143 lb)

Electrical Specifications Capacitance 80.0 pF/m (24.4 pF/ft) Impedance 50 ± 1 Ω Velocity 83% RF Peak Voltage 1.13 kV Peak Power Rating 19 kW Cut-off Frequency 12.50 GHz Shielding Effectiveness>10MHz >120 Db Insulation resistance 5000M Ω-Km VSWR 0.8~1.0 GHz ≤1.10 1.7~2.2 GHz ≤1.10 2.2~2.7 GHz ≤1.13

Página | 8

Environmental Specifications Storage Temperature -55 ˚C ~ +85 ˚C Installation Temperature -40 ˚C ~ +60 ˚C Operation Temperature -55 ˚C ~ +85 ˚C

Perforance - Attenuation

Frequency Attenuation Attenuation Average MHz dB/100 m dB/100 ft Power Rating (kW)

100,00 3,22 0,98 3,03 150,00 4,05 1,23 2,39 200,00 4,65 1,42 2,11 280,00 5,65 1,72 1,69 450,00 7,20 2,19 1,37 800,00 9,86 3,01 1,00 900,00 10,56 3,22 0,94

1000,00 11,15 3,40 0,88 1500,00 13,80 4,21 0,70 1800,00 15,55 4,74 0,63 2000,00 16,40 5,00 0,59 2200,00 17,35 5,29 0,56 2400,00 18,10 5,52 0,53 2500,00 18,50 5,64 0,52 3000,00 20,90 6,37 0,48

Standard Conditions For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F) For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F) Inner Conductor temperature 100 °C (212 °F). No solar loading. Maximum attenuation value shall be 105% of the nominal attenuation value .

Página | 9

General

LCF78STD(Z) LCF78STD(Z), Silexstd ® RF Low Density Foam Coaxial Cable 7/8”, corrugated copper, 7/8 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z). Type HCTAY (Z)-50-22

Construction Materials Inner Conductor Smooth Copper Tube Dielectric Physical Foam Polyethylene Outer Conductor Corrugated Copper Tube Jacket Black PE or Low Smoke Halogen-free Fire-retardant

Physical Dimensions Inner Conductor Diameter 9.00 mm Dielectric Diameter 22.30 mm Outer Conductor Diameter 24.90 mm Diameter Over Jacket 27.50 mm

Mechanical Specifications Minimum Bending Radius Single Bending 90 mm Repeated Bending 250 mm Minimum Number of Bends 15 Tensile Strength 1470 N (330 lb)

Electrical Specifications Capacitance 75.0 pF/m (22.9 pF/ft) Impedance 50 ± 1 Ω Velocity 89% RF Peak Voltage 3.00 kV Peak Power Rating 91 kW Cut-off Frequency 5.20 GHz Shielding Effectiveness>10MHz >120 dB Insulation resistance 5000M Ω-Km VSWR 0.8~1.0 GHz ≤1.10 1.7~2.2 GHz ≤1.10 2.2~2.7 GHz ≤1.13

Página | 10

Environmental Specifications Storage Temperature -55 ˚C ~ +85 ˚C Installation Temperature -40 ˚C ~ +60 ˚C Operation Temperature -55 ˚C ~ +85 ˚C

Perforance - Attenuation

Frequency Attenuation Attenuation Average MHz dB/100 m dB/100 ft Power Rating (kW)

100,00 1,19 0,36 8,62 150,00 1,47 0,45 7,20 200,00 1,71 0,52 5,99 280,00 2,05 0,62 4,94 450,00 2,64 0,80 3,88 800,00 3,62 1,10 2,83 900,00 3,87 1,18 2,65

1000,00 4,10 1,25 2,50 1500,00 5,16 1,57 1,99 1800,00 5,73 1,75 1,79 2000,00 6,09 1,86 1,68 2200,00 6,44 1,96 1,59 2400,00 6,78 2,07 1,54 2500,00 6,95 2,12 1,50 3000,00 7,74 2,36 1,33

Standard Conditions For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F) For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F) Inner Conductor temperature 100 °C (212 °F). No solar loading. Maximum attenuation value shall be 105% of the nominal attenuation value.

Página | 11

General

LCF158STD(Z) LCF158STD(Z), Silexstd ® RF Low Density Foam Coaxial Cable 1-5/8", corrugated copper, 1-5/8 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z). Type HHTAY(Z)-50-42

Construction Materials Inner Conductor Helical Copper Tube Dielectric Physical Foam Polyethylene Outer Conductor Corrugated Copper Tube Jacket Black PE or Low Smoke Halogen-free Fire-retardant

Physical Dimensions Inner Conductor Diameter 17.40 mm Dielectric Diameter 42.80 mm Outer Conductor Diameter 46.50 mm Diameter Over Jacket 49.50 mm

Mechanical Specifications Minimum Bending Radius Single Bending 200 mm Repeated Bending 510 mm Minimum Number of Bends 15 Tensile Strength 3300 N (750 lb)

Electrical Specifications Capacitance 76.0 pF/m (23.2 pF/ft) Impedance 50 ± 1 Ω Velocity 88% RF Peak Voltage 5.70 kV Peak Power Rating 320 kW Cut-off Frequency 2.80 GHz Shielding Effectiveness>10MHz >120 dB Insulation resistance 5000M Ω-Km VSWR 0.8~1.0 GHz ≤1.10 1.7~2.2 GHz ≤1.10 2.2~2.7 GHz ≤1.13

Página | 12

Environmental Specifications Storage Temperature -55 ˚C ~ +85 ˚C Installation Temperature -40 ˚C ~ +60 ˚C Operation Temperature -55 ˚C ~ +85 ˚C

Perforance - Attenuation

Frequency Attenuation Attenuation Average MHz dB/100 m dB/100 ft Power Rating (kW)

100,00 0,67 0,20 16,90 150,00 0,84 0,26 13,48 200,00 0,98 0,30 11,60 280,00 1,20 0,37 9,47 450,00 1,53 0,47 7,36 800,00 2,12 0,65 5,26 900,00 2,28 0,69 4,93

1000,00 2,42 0,74 4,61 1500,00 3,09 0,94 3,64 1800,00 3,45 1,05 3,27 2000,00 3,68 1,12 3,00 2200,00 3,91 1,19 2,85 2400,00 4,13 1,26 2,70 2500,00 4,24 1,29 2,61

Standard Conditions For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F) For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F) Inner Conductor temperature 100 °C (212 °F). No solar loading. Maximum attenuation value shall be 105% of the nominal attenuation value.

Página | 13

General

LCF12STL(Z) LCF12STL(Z), Silexstl ® RF Low Density Foam Coaxial Cable 1/2", corrugated Aluminium, 1/2 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z). Type HCAAY-L(Z)-50-12

Construction Materials Inner Conductor Copper-Clad Aluminum Wire Dielectric Physical Foam Polyethylene Outer Conductor Corrugated Aluminium Tube Jacket Black PE or Low Smoke Halogen-free Fire-retardant

Physical Dimensions Inner Conductor Diameter 4.80 mm Dielectric Diameter 12.30 mm Outer Conductor Diameter 13.80 mm Diameter Over Jacket 15.70 mm

Mechanical Specifications Minimum Bending Radius Single Bending 50 mm Repeated Bending 125 mm Minimum Number of Bends 15 Tensile Strength 1000 N

Electrical Specifications Capacitance 76.0 pF/m (23.2 pF/ft) Impedance 50 ± 1 O Velocity 88% RF Peak Voltage 1.60 kV Peak Power Rating 36 kW Cut-o" Frequency 8.8 GHz Shielding E"ectiveness>10MHz >120 dB Insulation resistance 5000M Ω-Km VSWR 0.8~1.0 GHz ≤1.10 1.7~2.2 GHz ≤1.10 2.2~2.7 GHz ≤1.13

Página | 14

Environmental Specifications Storage Temperature -55 ˚C ~ +85 ˚C Installation Temperature -40 ˚C ~ +60 ˚C Operation Temperature -55 ˚C ~ +85 ˚C

Perforance - Attenuation

Frequency Attenuation Attenuation Average MHz dB/100 m dB/100 ft Power Rating (kW)

100,00 2.40 (0.73) 3,58 200,00 3.45 (1.05) 2,50 450,00 5.25 (1.60) 1,64 800,00 7.15 (2.18) 1,21 900,00 7.65 (2.33) 1,14 1000,00 8.10 (2.47) 1,07 1500,00 10.10 (3.08) 0,86 1800,00 11.15 (3.40) 0,78 2000,00 11.85 (3.61) 0,74 2200,00 12.50 (3.81) 0,70 2400,00 13.05 (3.98) 0,68 2500,00 13.40 (4.08) 0,66 3000,00 14.80 (4.51) 0,59

Standard Conditions For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F) For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F) Inner Conductor temperature 100 °C (212 °F). No solar loading. Maximum attenuation value shall be 105% of the nominal attenuation value.

Página | 15

General

LCF78STL(Z) LCF78STL(Z), Silexstl ® RF Low Density Foam Coaxial Cable 7/8", corrugated Aluminium, 7/8 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z). Type HCTAY-L (Z)-50-22

Construction Materials Inner Conductor Smooth Copper Tube Dielectric Physical Foam Polyethylene Outer Conductor Corrugated Aluminium Tube Jacket Black PE or Low Smoke Halogen-free Fire-retardant

Physical Dimensions Inner Conductor Diameter 9.00 mm Dielectric Diameter 22.30 mm Outer Conductor Diameter 24.90 mm Diameter Over Jacket 27.50 mm

Mechanical Specifications Minimum Bending Radius Single Bending 130 mm Repeated Bending 250 mm Minimum Number of Bends 15 Tensile Strength 1350 N

Electrical Specifications Capacitance 75 pF/m(22.9 pF/ft) Impedance 50 ± 1 Ω Velocity 88% RF Peak Voltage 3.00 kV Peak Power Rating 82 kW Cut-off Frequency 5.20 GHz Shielding Effectiveness>10MHz >120 dB Insulation resistance 5000M Ω-Km VSWR 0.8~1.0 GHz ≤1.10 1.7~2.2 GHz ≤1.10 2.2~2.7 GHz ≤1.13

Página | 16

Environmental Specifications Storage Temperature -55 ˚C ~ +85 ˚C Installation Temperature -40 ˚C ~ +60 ˚C Operation Temperature -55 ˚C ~ +85 ˚C

Perforance - Attenuation

Frequency Attenuation Attenuation Average MHz dB/100 m dB/100 ft Power Rating (kW)

100 MHz 1.25 (0.38) 6,50 200 MHz 1.80 (0.55) 4,50 450 MHz 2.77 (0.84) 3,00 800 MHz 3.83 (1.17) 2,20 900 MHz 4.08 (1.24) 2,10 1000 MHz 4.30 (1.31) 2,00 1500 MHz 5.45 (1.66) 1,70 1800 MHz 6.05 (1.84) 1,60 2000 MHz 6.45 (1.97) 1,50 2200 MHz 6.85 (2.09) 1,40 2400 MHz 7.15 (2.18) 1,30 2500 MHz 7.35 (2.24) 1,20 3000 MHz 8.20 (2.50) 1,10

Standard Conditions For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F) For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F) Inner Conductor temperature 100 °C (212 °F). No solar loading. Maximum attenuation value shall be 105% of the nominal attenuation value.

Página | 17

General

LCF158STL(Z) LCF158STL(Z), Silexstl ® RF Coaxial Cable 1-5/8", corrugated Aluminium, 1-5/8 in, Black PE or Low Smoke Halogen-free Fire-retardant (Z). Type HHTAY-L (Z)-50-42

Construction Materials Inner Conductor Helical Copper Tube Dielectric Physical Foam Polyethylene Outer Conductor Corrugated Aluminum Tube Jacket Black PE or Low Smoke Halogen-free Fire-retardant

Physical Dimensions Inner Conductor Diameter 17.40 mm Dielectric Diameter 42.80 mm Outer Conductor Diameter 46.50 mm Diameter Over Jacket 49.50 mm

Mechanical Specifications Minimum Bending Radius Single Bending 200 mm Repeated Bending 510 mm Minimum Number of Bends 15 Tensile Strength 3000 N

Electrical Specifications Capacitance 76.0 pF/m (23.2 pF/ft) Impedance 50 ± 1 Ω Velocity 88% RF Peak Voltage 5.70 kV Peak Power Rating 290 kW Cut-off Frequency 2.80 GHz Shielding Effectiveness>10MHz >120 dB Insulation resistance 5000M Ω-Km VSWR 0.8~1.0 GHz ≤1.10 1.7~2.2 GHz ≤1.10 2.2~2.7 GHz ≤1.13

Página | 18

Environmental Specifications Storage Temperature -55 ˚C ~ +85 ˚C Installation Temperature -40 ˚C ~ +60 ˚C Operation Temperature -55 ˚C ~ +85 ˚C

Perforance - Attenuation

Frequency Attenuation Attenuation Average MHz dB/100 m dB/100 ft Power Rating (kW)

100 MHz 0.76 (0.23) 15,55 200 MHz 1.09 (0.33) 10,27 450 MHz 1.72 (0.52) 6,46 800 MHz 2.40 (0.73) 4,62 900 MHz 2.58 (0.79) 4,30 1000 MHz 2.74 (0.84) 4,05 1500 MHz 3.50 (1.07) 3,17 1800 MHz 3.94 (1.20) 2,83 2000 MHz 4.20 (1.28) 2,65 2200 MHz 4.46 (1.36) 2,49 2400 MHz 4.74 (1.44) 2,34 2500 MHz 4.86 (1.48) 2,28 3000 MHz -

-

Standard Conditions For Attenuation: VSWR 1.0, Cable temperature 20 °C (68 °F) For Average Power: VSWR 1.0, Ambient temperature 40 °C (104 °F) Inner Conductor temperature 100 °C (212 °F). No solar loading. Maximum attenuation value shall be 105% of the nominal attenuation value.

Página | 19

General Specifications

LCF12STD-xxM-DINF-DINF Low PIM |-160 dBc Jumper 1/2" Standard type LCFSTD Silexjpx ® Jumper with interface types 7/16 DIN Female straight to 7/16 DIN Female Low PIM, (xx) Length

Jumpers feature specially designed connectors which are soldered-on in a strictly controlled industrial process. The connector design and manufacturing process has been optimized to produce premium PIM3, VSWR and IM levels. The low PIM coaxial jumper cable assemblies have an injection molded boot on each connector which provides added strain relief and weather sealing ensuring long term durability. Available in 1/2" flexible and 1/2" superflexible coaxial cables, Silexjpx low PIM coax cables can be ordered in standard and custom lengths with 7/16 DIN and Type N connectors to meet your specific requirements.

Cable assembly Series connector 1 7/16 Interface 1 jack straight female Cable, Nominal Size 1/2〃Standard LCF Type Series connector 2 7/16 Interface 2 jack straight female

Outline Drawing

Construction Materials Cable Type 1/2" LCF Jacket PE or (Z) Fire Retardancy Test Method IEC 60332-1 flame retardant | IEC 60332-3C-24 fire retardant

Smoke Index Test Method IEC 61034 low smoke Toxicity Index Test Method IEC 60754-1 | IEC 60754-2 smoke emission: halogen free, non corrosive

Connector 1 7/16 DIN Female straight Connector 1 7/16 DIN Female straight Specifications Connector Inner Conductor Pin Brass/Silver Plating

Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber

Durability >500 cycle Sealing class IP68

Página | 20

Electrical Specifications Frequency Range DC to 3 GHz Impedance Ohms 50 Ω Maximum VSWR 1.15:1 Velocity Propagation 83% RFShielding 120 dB PeakPower 16 KWatts Passive Intermodulation -160 dBc VSWR (Return Loss, dB) 1.065 (30) @ 1710 - 1990 MHz

1.065 (30) @ 2000 - 2200 MHz 1.083 (28) @ 2200 - 2700 MHz

Environmental Specifications Installation Temperature, °C(°F) -25 to 60 (-13 to 140 ) Operation Temperature, °C(°F) -50 to 85 (-58 to 185 ) Storage Temperature, °C(°F) -70 to 85 (-94 to 185 )

Jumper Assembly Sample

Example Order Number: LCF12STD4M DINMA DINM

Cable Types

Length in Inches Connector 1 - Connector 2 = LCF12STD 4M DINMA DINM

Type Connector

LCF12STD M DIN Male

DINM HCF12STD M DIN Female

DINF

LMR240 M

DIN Male Right Angle

DINMA

LMR300 M N Male

NM LMR400 M N Female

NF

RG8 M N Male Right Angle

NMA

Connector 1:DIN Male Right Angle RG59 M

Connector 1: DIN Male 7/16

RG213 M

Length: 4 metres RG214 M

Cable Type: LCF12STD

Página | 21

General Specifications

LCF12HR-xxM-DINMA-DINM Low PIM |-160 dBc Jumper 1/2" Standard type LCFSTD Silexjpx ® Jumper with interface types 7/16 DIN Male right angle to 7/16 DIN Male straight Low PIM, (xx) Length

Jumpers feature specially designed connectors which are soldered-on in a strictly controlled industrial process. The connector design and manufacturing process has been optimized to produce premium PIM3, VSWR and IM levels. The low PIM coaxial jumper cable assemblies have an injection molded boot on each connector which provides added strain relief and weather sealing ensuring long term durability. Available in 1/2" flexible and 1/2" superflexible coaxial cables, Silexjpx low PIM coax cables can be ordered in standard and custom lengths with 7/16 DIN and Type N connectors to meet your specific requirements.

Cable assembly Series connector 1 7/16 Interface 1 jack right angle Cable, Nominal Size 1/2〃Superflex HR Type Series connector 2 7/16 Interface 2 jack straight

Jumper Assembly Sample

Example Order Number: LCF12STD4M DINMA DINM

Cable Types

Length in Inches Connector 1 - Connector 2 = LCF12STD 4M DINMA DINM

Type Connector

LCF12STD M DIN Male

DINM HCF12STD M DIN Female

DINF

LMR240 M

DIN Male Right Angle

DINMA

LMR300 M N Male

NM LMR400 M N Female

NF

RG8 M N Male Right Angle

NMA

Connector 1:DIN Male Right Angle RG59 M

Connector 1: DIN Male 7/16

RG213 M

Length: 4 metres RG214 M

Cable Type: LCF12STD

Página | 22

Outline Drawing

Construction Materials Cable Type 1/2" LCF Jacket PE or (Z) Fire Retardancy Test Method IEC 60332-1 flame retardant | IEC 60332-3C-24 fire retardant

Smoke Index Test Method IEC 61034 low smoke Toxicity Index Test Method IEC 60754-1 | IEC 60754-2 smoke emission: halogen free, non corrosive

Connector 1 7/16 DIN Male right angle Connector 1 7/16 DIN Male straigth Specifications Connector Inner Conductor Pin Brass/Silver Plating

Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber

Durability >500 cycle Sealing class IP68

Electrical Specifications Frequency Range DC to 2.7 GHz Impedance Ohms 50 Ω Maximum VSWR 1.11:1 Velocity Propagation 83% RFShielding 120 dB PeakPower 16 KWatts Passive Intermodulation -160 dBc VSWR (Return Loss, dB) 1.065 (30) @ 1710 - 1990 MHz

1.065 (30) @ 2000 - 2200 MHz 1.083 (28) @ 2200 - 2700 MHz

Environmental Specifications Installation Temperature, °C(°F) -25 to 60 (-13 to 140 ) Operation Temperature, °C(°F) -50 to 85 (-58 to 185 ) Storage Temperature, °C(°F) -70 to 85 (-94 to 185 )

Página | 23

General Specifications

GROUNDING KITS SLXGKM 3/8", 1/2", 7/8", 1-5/8

This Grounding Kit has been developed for copper and aluminum cable series. The Grounding Kit body facilitates a proper attachment

to the coaxial cable, ensuring that the performance of the coaxial cable.

The tin plated copper mesh provides a secure, low resistance contact to the cable outer conductor. The installation is fast and simple. Electrical Specifications

Item SLXGKM Type

Grounding Wire Length 1 m or Customized

Cable Section Acreage 16/25 mm2

Electric Pressure >500 N

Contact Material Tinned Copper

Wire Braiding

Waterproof Material -

Resistance ≤3 mΩ

Voltage Resistance 80 kA Power Frequency Withstand Voltage 35 kV

Insulation Resistance 10 GΩ

Earth Resistance 2 mΩ

Durability >10 years

Suitable Cable 3/8", 1/2", 7/8", 1-5/8

Página | 24

General Specifications

FEEDER CLAMPS SLXCL Through Type Feeder Clamp

Stainless steel clamps are applicable to fix feeder cables for microwave and mobile communication; they are made up of excellent anti-acid steel, will never rust under weather conditions.

Parts Specifications Materials C-clamp 5mm SUS304 Towl washer 1mm SUS304 Bolt M8*45 SUS304 Nut Ø8 SUS304 Threaded rod M8*80 SUS304 Plastic clamp 1/2", 7/8'', 1-5/8” PP Nut Ø8 SUS304 Flat washer Ø8 SUS304

Outdoor clamp for 1/2" Tower CLE Feeder Clamp

SXCL121E SXCL122E SXCL123E SXCL124E

Página | 25

Outdoor clamp for 7/8" Tower CLE Feeder Clamp

SXCL781E SXCL782E SXCL783E SXCL784E

SXCL781E2 SXCL783E2 SXCL783E2 Outdoor clamp for 1 5/8" Tower CLE Feeder Clamp

SXCL1581E SXCL1582E SXCL1583E

Página | 26

Outdoor clamp for 1 5/8" Tower CLE Feeder Clamp

SXCL1581E2 SXCL1583E2 SXCL1583E2 Outdoor clamp for 3/8, RG8, RG214 Tower CLE Feeder Clamp

SXCL381E2 SXCL382E2 SXCL383E2 SXCLRG81E2 SXCLRG82E2 SXCLRG83E2 SXCLRG2141E2 SXCLRG2142E2 SXCLRG2143E2

Outdoor clamp for UTP cable 2x7 or 2x11 Tower CLE Feeder Clamp

SXCLUTP271E2 SXCLUTP272E2 SXCLUTP273E2 SXCLUTP2111E2 SXCLUTP2112E2 SXCLUTP2113E2

Página | 27

Outdoor clamp for FO + DC Tower CLE Feeder Clamp

SXCLFO589131E2 SXCLFO589132E2 SXCLFO589133E2 Outdoor for Tower Through Clamp Hanger Kit

Página | 28

Indoor CLE Feeder Clamp for 1/2", FO, UTP, RG cables types singles and doubles Fixings example on steel wire-mesh cable trays

SXCL121I SXCL122I SXCL123I SXCL781I SXCL782I SXCL783I SXCL1581I SXCL1582I SXCL1583I SXCLFO55141I SXCLFO55142I SXCLFO55143I

SXCLFO589131I2 SXCLFO589132I2 SXCLFO589133I2

Página | 29

Connector & Cable - Comparison of different connector types

Size (1/4") (3/8") (1/2") (5/8") ( 7/8") (1-1/4") (1-5/8")

Sile

xStd

Con

nect

or C

able

Sta

ndar

d Fl

ex

Coaxial Cable

Standard Code HCAAY-50-6 HCAAY-50-8 HCAAY-50-12 HCTAY-50-16 HCTAY-50-22 HCTAY-50-32 HHTAY-50-42

Silex Code LCF14STD LCF38STD LCF12STD LCF58STD LCF78STD LCF114STD LCF158STD

Connector

Standard Code DINM-1/4"L DINM-3/8"L DINM-1/2"L DINM-5/8"L DINM-7/8"L DINM-1-1/4"L DINM-1-5/8"L

Silex Code CCF14STD716M CCF38STD716M CCF12STD716M CCF58STD716M CCF78STD716M CCF114STD716M CCF158STD716M

Connector

Standard Code DINF-1/4"L DINF-3/8"L DINF-1/2"L DINF-5/8"L DINF-7/8"L DINF-1-1/4"L DINF-1-5/8"L

Silex Code CCF14STD716F CCF38STD716F CCF12STD716F CCF58STD716F CCF78STD716F CCF114STD716F CCF158STD716F

Connector

Standard Code DINMA-1/4"L DINMA-3/8"L DINMA-1/2"L - DINMA-7/8"L - -

Silex Code CCF14STD716MA CCF38STD716MA CCF12STD716MA - CCF12STD716MA - -

Connector

Standard Code NM-1/4"L NM-3/8"L NM-1/2"L NM-5/8"L NM-7/8"L NM-1-1/4"L NM-1-5/8"L

Silex Code CCF14STDNM CCF38STDNM CCF12STDNM CCF58STDNM CCF78STDNM CCF114STDNM CCF158STDNM

Connector

Standard Code NF-1/4"L NF-3/8"L NF-1/2"L NF-5/8"L NF-7/8"L NF-1-1/4"L NF-1-5/8"L

Silex Code CCF14STDNF CCF38STDNF CCF12STDNF CCF58STDNF CCF78STDNF CCF114STDNF CCF158STDNF

Connector

Standard Code NMA-1/4"L NMA-3/8"L NMA-1/2"L - - - -

Silex Code CCF14STDNMA CCF38STDNMA CCF12STDNMA - - - -

Size (1/4") (3/8") (1/2") (5/8") ( 7/8") (1-1/4") (1-5/8")

Sile

xFle

x Co

nnec

tor

Cabl

e Su

perf

lex

Coaxial Cable

Standard Code HRCAY-50-5 HRCAY-50-7 HRCAY-50-9

Silex Code LCF14HR LCF38HR LCF12HR

Connector

Standard Code DINM-1/4"H DINM-3/8"H DINM-1/2"H

Silex Code CCF14STDNM CCF38STDNM CCF12STDNM

Connector

Standard Code DINF-1/4"H DINF-3/8"H DINF-1/2"H

Silex Code CCF14STDNF CCF38STDNF CCF12STDNF

Connector

Standard Code DINMA-1/4"H DINMA-3/8"H DINMA-1/2"H

Silex Code CCF14STDNMA CCF38STDNMA CCF12STDNMA

Connector

Standard Code NM-1/4"H NM-3/8"H NM-1/2"H

Silex Code CCF14HRNM CCF38HRNM CCF12HRNM

Connector

Standard Code NF-1/4"H NF-3/8"H NF-1/2"H

Silex Code CCF14HRNF CCF38HRNF CCF12HRNF

Connector

Standard Code NMA-1/4"H NMA-3/8"H NMA-1/2"H

Silex Code CCF14HRNMA CCF38HRNMA CCF12HRNMA

Página | 30

Connector 7/16 & N Types SilexConnector offers a variety of connector types for Sliex Cablex Coaxial. Silexst® connectors are engineered and manufactured to the highest standards, achieving maximum performance.

Silexst® connectors are available in both the male and female versions of type N and type 7/16 DIN connectors. Can be installed on coaxial cable quickly, easily and consistently.

Precision Products for Demanding Applications

SilexConnect™ high performance connectors are designed for use with both Silexstd® corrugated copper and Silexstl® corrugated aluminum cables. They are designed specifically to provide the highest quality connector-cable interface while simplifying and speeding up connector attachment.

Advantages of Silexst® Connectors & Adaptors

• Ease of Installation • Completely Weatherproof and Consistent • Long Life • Low Intermodulation and VSWR • Corrosion Resistant • Silver-plated bodies and silver-plated electrical

• Low PIM

Página | 31

General

CCF12STD716M

CCF12STD716M SilexConnect ® RF 7/16 Din Male Connector for 1/2” Coaxial Cable Type DINM-1/2"L

Nominal size 1/2" in Interface 7/16 DIN Male Body Style Straight Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss ≤0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze/Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal Plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 32

General

CCF12STD716F CCF12STD716F SilexConnect ® RF 7/16 Din Female Connector for 1/2” Coaxial Cable Type DINF-1/2"L

Nominal size 1/2" in Interface 7/16 DIN Female Body Style Straight Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating Insulator PTFE or TPX PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating Gasket Silicon Rubber Silicon Rubber Durability >500 cycle >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 33

General

CCF12STD716MA CCF12STD716MA SilexConnect ® RF 7/16 Din Male Connector for 1/2” Coaxial Cable Type DINMA-1/2”L

Nominal size 1/2" in Interface 7/16 DIN Male Body Style Right angle Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating Insulator PTFE or TPX PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating Gasket Silicon Rubber Silicon Rubber Durability >500 cycle >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 34

General

CCF12STDNM CCF12STDNM SilexConnect ® RF N Male Connector for 1/2” Coaxial Cable Type DINNM-1/2”L

Nominal size 1/2" in Interface N Male Body Style Straight Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating Insulator PTFE or TPX PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating Gasket Silicon Rubber Silicon Rubber Durability >500 cycle >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions

Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F Outline Drawing

Página | 35

General

CCF12STDNF CCF12STDNF SilexConnect ® RF N Female Connector for 1/2” Coaxial Cable Type DINNF-1/2” L

Nominal size 1/2" in Interface N Female Body Style Straight Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating Insulator PTFE or TPX PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating Gasket Silicon Rubber Silicon Rubber Durability >500 cycle >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 36

General

CCF12STDNMA CCF12STD716NMA SilexConnect ® RF N Male Connector for 1/2” Coaxial Cable Type DINNMA-1/2”L

Nominal size 1/2" in Interface N Male Body Style Right angle Mounting cable Models: copper LCF12STD, aluminum LCF12STL, HCAAY-50-12

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions

Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 37

General

CCF12HR716M CCF12HR716M SilexConnect ® RF 7/16 Din Male Connector for 1/2” Coaxial Superflex Cable Type DINM-1/2"H

Nominal size 1/2" in Interface 7/16 DIN Male Body Style Straight Mounting cable Model LCF12HR, HCAAY-50-09

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating Insulator PTFE or TPX PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating Gasket Silicon Rubber Silicon Rubber Durability >500 cycle >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 38

General

CCF12HR716F CCF12HR716F SilexConnect ® RF 7/16 Din Female Connector for 1/2” Coaxial Superflex Cable Type DINF-1/2"H

Nominal size 1/2" in Interface 7/16 DIN Female Body Style Straight Mounting cable Model LCF12HR, HCAAY-50-09

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating Insulator PTFE or TPX PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating Gasket Silicon Rubber Silicon Rubber Durability >500 cycle >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 39

General

CCF12HR716MA CCF12HR716MA SilexConnect ® RF 7/16 Din Male Connector for 1/2” Coaxial Superflex Cable Type DINMA-1/2”H

Nominal size 1/2" in Interface 7/16 DIN Male Body Style Right angle Mounting cable Model LCF12HR, HCAAY-50-09

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Tin Bronze/Silver Plating Insulator PTFE or TPX PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Brass/Trimetal Plating Gasket Silicon Rubber Silicon Rubber Durability >500 cycle >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 40

General

CCF12HRNM CCF12HRNM SilexConnect ® RF N Male Connector for 1/2” Coaxial Superflex Cable Type DINNM-1/2”H

Nominal size 1/2" in Interface N Male Body Style Straight Mounting cable Model LCF12HR, HCAAY-50-09

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 41

General

CCF12HRNF CCF12HRNF SilexConnect ® RF N Female Connector for 1/2” Coaxial Superflex Cable Type DINNF-1/2” H

Nominal size 1/2" in Interface N Female Body Style Straight Mounting cable Model LCF12HR, HCAAY-50-09

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 42

General

CCF12HRNMA CCF12HRNMA SilexConnect ® RF N Male Connector for 1/2” Coaxial Superflex Cable Type DINNMA-1/2”H

Nominal size 1/2" in Interface N Male Body Style Right angle Mounting cable Model LCF12HR, HCAAY-50-09

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 43

General

CCF78STD716M CCF78STD716M SilexConnect ® RF 7/16 Din Male Connector for 7/8” Coaxial Cable Type DINM-7/8”L

Nominal size 7/8" in Interface 7/16 DIN Male Body Style Straight Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze/Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal Plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 44

General

CCF78STD716F CCF78STD716F SilexConnect ® RF 7/16 Din Female Connector for 7/8” Coaxial Cable Type DINF-7/8"L

Nominal size 7/8" in Interface 7/16 DIN Female Body Style Straight Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze/Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal Plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 45

General

CCF78STD716MA CCF78STD716MA SilexConnect ® RF7/16 Din Male Connector for 7/8” Coaxial Cable Type DINMA-7/8”L

Nominal size 7/8" in Interface 7/16 DIN Male Body Style Right angle Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze/Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal Plating Gasket Silicon Rubber Durability >500 cycle Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 46

General

CCF78STDNM CCF78STDNM SilexConnect ® RF N Male Connector for 7/8” Coaxial Cable Type DINNM-7/8”L

Nominal size 7/8" in Interface N Male Body Style Straight Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 47

General

CCF78STDNF CCF78STDNF SilexConnect ® RF N Female Connector for 7/8” Coaxial Cable Type DINNF-7/8”L

Nominal size 7/8" in Interface N Female Body Style Straight Mounting cable Models: copper LCF78STD, aluminum LCF78STL, HCTAY-50-22

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 48

General

CCF158STD716M CCF158STD716M SilexConnect ® RF 7/16 Din Male Connector for 1-5/8” Coaxial Cable Type DINM-1-5/8”L

Nominal size 1-5/8" in Interface 7/16 DIN Male Body Style Straight Mounting cable Models: copper LCF158STD, aluminum LCF158STL, HCTAY-50-42

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze/Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal Plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 49

General

CCF158STD716F CCF158STD716F SilexConnect ® RF 7/16 Din Female Connector for 1-5/8” Coaxial Cable Type DINF-1-5/8"L

Nominal size 1-5/8" in Interface 7/16 DIN Female Body Style Straight Mounting cable Models: copper LCF158STD, aluminum LCF158STL, HCTAY-50-42

Technical Specifications Characteristics DIN Type Impedance 50 Ω Operating Voltage 2700 V Frequency Range ≤7.5 GHz Shielding Effectiveness >115 dB Inner Contact Resistance ≤0.4 MΩ Outer Contact Resistance ≤0.2 MΩ Intermodulation ≤-155 dBc Insulation Resistance >10000 MΩ Dielectric Withstanding Voltage 3000 V Insertion Loss =0.08 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze/Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal Plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 50

General

CCF158STDNM CCF158STDNM SilexConnect ® RF N Male Connector for 1-5/8” Coaxial Cable Type DINNM-1-5/8”L

Nominal size 1-5/8" in Interface N Male Body Style Straight Mounting cable Models: copper LCF158STD, aluminum LCF158STL, HCTAY-50-42

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 51

General

CCF58STDNF CCF158STDNF SilexConnect ® RF N Female Connector for 1-5/8” Coaxial Cable Type DINNF-1-5/8”L

Nominal size 1-5/8" in Interface N Female Body Style Straight Mounting cable Models: copper LCF158STD, aluminum LCF158STL, HCTAY-50-42

Technical Specifications Characteristics N Type Impedance 50 Ω Operating Voltage 1500 V Frequency Range ≤18.0 GHz Shielding Effectiveness >115 Db Inner Contact Resistance ≤0.8 MΩ Outer Contact Resistance ≤0.25 MΩ Intermodulation ≤-155 dBc Insulation Resistance >5000 MΩ Dielectric Withstanding Voltage 2500 V Insertion Loss =0.1 dB VSWR 0.8 ~ 1.0GHz ≤1.08 1.7 ~ 2.5GHz ≤1.10 Inner Conductor Pin Brass/Silver Plating Inner Conductor Socket Tin Bronze /Silver Plating Insulator PTFE or TPX Body & Outer Conductor Brass/Trimetal plating Gasket Silicon Rubber Durability >500 cycle

Environmental Specifications Temperature Range -65 ºC ~ +165ºC Immersion Depth - Immersion Test Method IEC 60529:2001, IP65 Moisture Resistance Test Method IEC 60068-2-3 Mechanical Shock Test Method IEC 60068-2-27 Thermal Shock Test Method IEC 60068-2-14 Vibration Test Method IEC 60068-2-6 Corrosion Test Method IEC 60068-2-11

Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F

Página | 52

General

GLQ14DINKK627T Arrestors DINM–DINF 2700 Connector 7/16 Arrestors DINF–DINF 2700 Connector 7/16 Type DIN716

Surge arrestors are designed to protect wireless base stations, switching centers and transmission lines from the damaging effects of extreme high voltage surges caused by lightning strikes. We our lightning protection devices are designed and tested to the most demanding specifications. Their rugged construction utilizes solid metal housing, and superior plating, which results in outstanding system protection and operating continuity

• Superior IM performance for reliable long-term operation • Excellent electrical performance, low VSWR, low insertion loss • Waterproof to IP68 • Including grounding wire kit • Totally maintenance free

Technical Specifications Surge Arrestor Type Quarter Wave Design 90° Stub Coaxial Cable Type Foam Dielectric Connector Interface 7-16 DIN Frequency Range - MHz 690 - 2700 Minimum Return Loss, VSWR (dB) 690-2700 MHz: 1.19 (21) Insertion Loss, dB (Max) 0.10 3rd Order IM Product @ 2x20 Watts, dBc < -160 Center Contact Connector A Brass, silver plated Outer Contact Connector A Brass, white bronze Center Contact Connector B Brass, silver plated Outer Contact Connector B Brass, white bronze Body Brass, white bronze Dielectric PTFE Gasket Silicone Sealing class IP68 Operation Temperature, °C(°F) -45 to 85 (-49 to 185) Mounting / Grounding Bulkhead; Thread for grounding M8 Drill Hole Size, mm (in) M8

Página | 53

Tools Feeder Cutting

1/2" Standard Feeder Cutting Tool Product Model: T-1/2"-EM

Body Material: Hard Aluminium Alloy Match Cable: 1/2" Standard Feeder Cable Cut Inner Conductor: 6.0~11.5mm Stripper jacket: 15.0 & 20.0±1.0mm (Dual-Use) Working Style: Electric Pistol Drill or Manual Operation

1/2" Superflex Feeder Cutting Tool Product Model: TOL-1/2"SF-EM

Body Material: Hard Aluminium Alloy Match Cable: 1/2" Standard Feeder Cable Cut Inner Conductor: 6.0~11.5mm ***

Keep Dielectric: 2mm (Insulator Dielectric) Stripper jacket: 20.0±1.0mm (Stripper jacket)

Working Style: Electric Pistol Drill or Manual Operation

1/2" Standard Feeder Cutting Tool Item Name: 1/2" Standard Feeder Cutting Tool Product Model: T-1/2-RS

1/2" Superflex Feeder Cutting Tool

Item Name: 1/2" Superflex Feeder Cutting Tool Product Model: T-1/2SF-RS

7/8" Feeder Cutting Tool Product Model: TOL-7/8-HXC

Body Material: PP Injection Molding Match Cable: 7/8" Feeder Cable Working Style: Manual Operation

Página | 54

Página | 55

Global Worldwide Distribution

Regulatory Compliance/Certifications

RoHS 2011/65/EU RoHS Compliant

Designed, manufactured and/or distributed under quality management system

Silex System Telecom

San Erasmo, 31 Nave 8 28021 - Madrid (Spain) Tel.: + 34 915 05 67 76 Mobile: +34 619 332 634 E-Mail: [email protected] Web: www.silexst.com Certified Products: ISO / EN / IEC Ordering No. Info32543SLink/WERE/09-2014 pA 1SFSD34 © 09.2014 Silexst Production & Powered By Silexst

All specifications are subject to change. See www.silexst.com for the most current information. Revised: September 06, 2014

Silex Global Spain, S.L. | The information contained in this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part, in order to implement improvements. Silexst reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. [email protected] – www.silexst.com ©2014 Silexst All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of Silexst