Catalogo Faro

GENERAL CATALOGuE 2012

DElightYOU.SOLUTIONS FOR DENTISTRY

AND LABORATORIES

SINCE 1948: EXPERIENCE AND INNOVATION

2 SOlUtiONS FOR DENTISTRY AND LABORATORIES

FARO DElightYOU. 3

Our company was born out of love by the dream of my grandfather and even today, after 60 years, it is as loved as the first day. It is a valuable asset that fills our lives with pride in its long history of all Italian prestige, for the innovative technologies and the support that our product provides to the work of every dentist.

I chose to accept the challenge of driving the company on its path because it’s been part of me ever since, as a child, I played along the corridors, in the workshop and in the yard. Today it belongs to my present, asking a lot but filling my heart with much satisfaction, tomorrow it will be part of my future, because this will always be my home.

Cristina Cesari FavonioGeneral Manager

DElightYOU.


salesTERMS AND CONDITIONS

GENERALThe commercial relationship between FARO and the client is regulated exclusively by the following conditions of sale which supersede and exclude all other previous agreements. For any claim, dispute, controversy arising in connection with the current price list, which cannot be satisfactorily settled by correspondence, we will refer to the Tribunal of Monza (MB) Italy.RESPONSABILITYFARO, except in cases of intentional or gross negligence, shall not be liable for any direct or indirect damages resulting from late or non delivery of the product, for the mismatch of the goods to the specifications published in the catalog or website, or for other reasons not relating to FARO.TECHNICAL INFORMATIONThis catalog contains information about some general characteristics indicative of the products shown. This information does not in any way constitute a description of specific characteristics from the manufacturer and/or seller. We therefore invite the customer to always consult the Company’s network at which the product is purchased in order to obtain complete information on the specifics. Some illustrations and descriptions sometimes refer to particular equipment, available only for extra charge. Some equipment and accessories may be introduced later.PRICE LISTPrices are on Ex works basis and expressed in Euro currency. This price list can be modified at anytime. This price list replaces and cancels any previous one.ORDERSThe order has to be sent by fax (+39 039 6010540) or by e-mail ([email protected]). Faro will confirm the order by sending the relevant order acknowledgement. Special request, and special colors are subjected to extra charges. The minimum amount to invoice is of Euro 104,00.SHIPMENTFARO is not responsible for shipments effected on Ex works basis. In case of any damage related to the shipments on Ex works basis, FARO will guarantee the repair at the customer’s expense.DELIVERYThe delivery time stated on the document is intended as an estimation and not as a commitment of Faro. In case of any delay this will never represent a breach to contracts or obligation of any reimbursement. Any terms for mandatory delivery have to be clearly agreed in writing by the parties.PAYMENTSAny delay in payment of the invoice will cause the debit of interests according to the legislative decree 231/02.RETURNSFARO reserves the right not to accept any return of material if not previously authorized. Any return authorization has to be required within 8 days upon the receipt of goods. Any material returned without authorization will be rejected at the customer’s expense. Material to return has to be packed into its original packing. The shipping document has to be filled in correctly with the indication of the purchasing details and Return Material Authorization number. FARO reserves the right to accept or not the return of material. Warranty will be recognized only upon the receipt of the relevant warranty certificate duly filled in.REPAIRS AND REPLACEMENTSGoods to be repaired or replaced by our Authorized Technical Center need to be previously authorized with the release of an RMA according to the terms indicated in the RMA itself. The material has to be sent indicating on the shipping document the cause “Return for repair” and the RMA number. All repairs will be returned by cash on delivery.WARRANTYWarranty will be recognized only upon the receipt of the relevant warranty certificate duly filled in within 60 days from the purchasing date.

FARO DElightYOU. 5

IllUMINaTION pag. 13LED AND HALOGEN

aPPlICaTIONseTs pag. 23AND COMPLEMENTS

sTeRIlIZaTION pag. 71AND WATER TREATMENT

INsTRUMeNTs pag. 79FOR DENTAL CABINETS

COMPONeNTs pag. 91FOR DENTAL UNITS

INsTRUMeNTs pag. 99FOR LABORATORIES

The six product lines that we are producing and marketing offer a full range of solutions for the construction of the medical and dental laboratory. Illumination includes several models of lamp, made with LED and HALOGEN technology. The application and complements sets are essential for the positioning of the lamps and related accessories on the dental unit and inside of the study; sterilization, which includes class B autoclaves, distillers, and systems for the treatment of water; instruments for dental cabinets, such as turbines, syringes, handpieces and contra-angles; a complete line of components, accessories and spare parts intended for dental units and, ultimately, the laboratory equipment with motors, handpieces and trimmers .

We can also customize our products to meet specific demands. For a custom project, please contact our Customer Service.

INDeXOF PRODUCTS

DElightYOU.SOLUTIONS FOR DENTISTRY

AND LABORATORIES



We prepare for the changes with positivity and enthusiasm.We develop our skills and personal abilities with formative training and updating activities.

Training has an important role: the responsibility for what we do is the solid foundation upon which we base our daily actions.

sHaReD VALUESThe excellence of our products is above all guaranteed by the great passion that drives us all. The values that we believe in are reflected in the details of every product that rolls off our assembly lines.

Top: the assembly of a lamp ALYA with LED technology, the pride of our production.

Left: the fixing of the closing door of the class B autoclaves SK07.

vaNgUaRDTeCHNOlOgYCRAFT AND MANUFACTORING

TaRgeT:TOTalQUalITYPROCESS CERTIFICATIONS

We work with the passion and humility that have always been the foundation of our company. We translate the needs of professionals in innovative products by merging the latest technologies and accurate techniques of craftsmanship. Curiosity, the spirit of observation, creativity and expertise allow us to grow and improve every day.

The quality, the safety, the effectiveness and the reliability of the entire FARO production is controlled

in every phase of the production flow. Since 1998 FARO quality system has been certified according

to rigorous ISO 9001:2008 and ISO 13485:2003 standards.

ISO 9001:2008 ISO 13485:2003

FARO DElightYOU. 7



ReseaRCH,DevelOPMeNTEXPERIENCE AND INNOVATION

Innovation for us means being able to anticipate the needs of our customers: a continuous journey whose goal is the development of advanced solutions for the construction of the dental cabinet and laboratory. The technological research conducted by the Research and Development Department allows our Technical Department to design products valued throughout the world. A great experience in daily progress, the result of which best expresses the pride of a product entirely made in Italy.

FARO DElightYOU. 9

The core of FARO equipment is packed with state of the art Italian technology, at the base of which is the constant and daily commitment of many people working to shape excellent products, designed on the real ergonomic needs of the doctor and patient.

BeHIND THE TECHNOLOGY



salesaNDaFTeRsaleseRvICesBEFORE, DURING AND AFTER THE PURCHASEThe effort we put into Sales and After Sale services of our products is thought to build solid, cordial, human relations. Reliable relations, as long lasting as our products.

Sharing common values that we believe in, we are joining forces to give you the best support at all stages: from sales to after sales. We are on your side to keep you informed of anything new, we help you choose the product that best suits your needs by answering your questions and providing all documentation and technical information; we assist you in managing the orders and, again, in the use and maintenance of the equipment.

FRaNCesCOFassIEXPORt SALES MANAGERPhone: +39 335 5826 720e-mail: [email protected]

PaOlOlegORIEXPORt AREA MANAGERPhone: +39 335 6895 888e-mail: [email protected]

FelICIaNOaMODIOitAlY SALES MANAGERPhone: +39 333 5932 371e-mail: [email protected]

MaUROIsaCCHIitAlY AREA MANAGERPhone: +39 346 0206 228e-mail: [email protected]

CallUsBYNaMeYOUCaNalwaYsCOUNTONUs.


FARO DElightYOU. 11

CUsTOMeRCAREAn ever present voice to guide you in choosingcustomized solutions.YOUR CONTACT IS saRaFUMagallIRESPONDING TO THE NUMBER +39 039 6878.205OR AT [email protected]

YOUR CONTACT IS gIOvaNNaDOZIORESPONDING TO THE NUMBER +39 039 6878.236OR AT [email protected]

MaRKeTINgAND COMMUNICATIONTo be informed of communications activities, events,or to request product literature.

YOUR CONTACT IS gaBRIellaMaRsONRESPONDING TO THE NUMBER +39 039 6878.256OR AT [email protected]

EXPORT CUsTOMeRseRvICeBeside you to manage orders and update you on the status of deliveries in foreign markets.

YOUR CONTACT IS BIaNCaMOsCONIRESPONDING TO THE NUMBER +39 039 6878.310OR AT [email protected]

ITALY CUsTOMeRseRvICeBeside you to manage orders and update you on the status of deliveries in the Italian market.

YOUR CONTACT IS RaFFaellaDall’aRMIRESPONDING TO THE NUMBER +39 039 6878.249OR AT [email protected]

aFTeRSALEProvides timely and accurate answers on technical assistance (CAT addresses) and suggestions on the use and maintenance of the products.

IllUMINaTIONLED AND HALOGEN

01


AlYAlEd

t E c h

The state of the art of LED technology ultimate generation. Powerful and

reliable, Alya is equipped as standard with the patented FARO triaxial

movement and optical system and with a sophisticated electronic device for better control of the lighting spot.

AVAILABLE cOlOURS :

RAL 9003RAL 9002 Special ColoursRAL 9010 RAL 9016

5.000 K* k

from 3.000 to 50.000*lUX6x3 mm ellipse*S-FX

for a better colour perception (maximum value = 100)CRI = 95*

24-MONTH-GUARANTEE

OPticAl SYStEM PATENT N. 18477623-d OPticAl AXiS ROtAtiON PATENT N. 1847762dESigN PATENT N. 0001780834-0001

Medical Device complies to the directive 93/42/CE

FARO SPA Ornago (Italy)

FARO DElightYOU. 15

tEchNicAl DATA

ElEctRONic CONTROLS Switching and dimming controls by micro joystick on the head; Switching control from unit or by foot control versions available; Proximity sensor with permanent memory and dimming management; Electronic microprocessor for lighting adjustment; Remote control from the unit: allows to repeat all joystick functions; Automatic memorization of the used light intensity, also after unit power

off or “rinse” function; Sound signal at minimum and maximum light intensity; Exclusive “one touch” adjustment

(composite position) to reach the minimum intensity with a simple “click”.’

L. 810/960

Standard pin Ø 35

55 550

Medical Device complies with Directive 93/42/CE and s.m.i. - Medical devices - class IApplied Standards: EN 60601-1, EN 60601-1-2, EN 60825 , EN 62471; Guaranteed 24 months

GENERAL FEATURES*Power Supply 17 - 24 Vac 50/60 Hz - 22 - 35 Vdc

With transformer 230V - 50/60Hz

Absorbed Power max 26 VA

Lighting source 2 LED

Lighting spot 180 x 90 mm

Cooling System static heat sink (no fan required)

Handles removable and autoclavable

ALYA lamp with gray inserts version

*(The above specifications are typical values subject to tolerance)


3-d ROtAtiON ON OPTICAL AXIS

FARO PATENTThe perfect balance, combined with the unique patented 3-D rotation on the optical axis of the head, provides

the best accuracy of the beam orientation, reducing the risk of accidental glare on the patient.

Allows the lamp rotation on three axes and provides a perfect

balance with the head thanks to its center of gravity positioned on

the rotation fulcrum.

3d

FARO DElightYOU. 17

AlYA VERSIONSALYA LAMP 81 AND 96 CM ARMdENtAl UNit VERSiONSwitching control from unit or by foot control, with or without transformer versions available

alYa81UNITwITHOUTTRaNsFORMeR wHITe gReYALYA dental light, arm 81 cm, without transformer dental unit version 310000000 310003000

ALYA dental light, arm 81 cm, without transformer, switching On/Off from dental unit, dental unit version 312000000 312003000

ALYA dental light, arm 81 cm, without transformer, with sensor switch, dental unit version 310100000 310103000

alYa96UNITwITHOUTTRaNsFORMeR wHITe gReYALYA dental light, arm 96 cm, without transformer, dental unit version 310010000 310013000

ALYA dental light, arm 96 cm, without transformer, switching On/Off from dental unit version 312010000 312013000

ALYA dental light, arm 96 cm, without transformer, with sensor switch, dental unit version 310110000 310113000

alYa81UNITwITHTRaNsFORMeR wHITe gReYALYA dental light, arm 81 cm, with transformer, dental unit version 310400000 310403000

ALYA dental light, arm 81 cm, with transformer, switching On/Off from dental unit version 312400000 312403000

ALYA dental light, arm 81 cm, with transformer, with sensor switch version, dental unit version 310500000 310503000

alYa96UNITwITHTRaNsFORMeR wHITe gReYALYA dental light, arm 96 cm, with transformer, dental unit version 310410000 310413000

ALYA dental light, arm 96 cm, with transformer, switching On/Off from dental unit version 312410000 312413000

ALYA dental light, arm 96 cm, with transformer, with sensor switch version, dental unit version 310510000 310513000

25

141

5

1730

L= / 960810

40

50

APPLICAZIONE A PAVIMENTO LATERALE LAMPADA ALYACON BRACCIO POSTERIORE L=810 / 960


alYa81CeIlINgwITHOUTTRaNsFORMeR wHITe gReYALYA dental light, arm 81 cm, without transformer, ceiling version 311000000 311003000

ALYA dental light, arm 81 cm, without transformer, with sensor switch, ceiling version 311100000 311103000

alYa81CeIlINgwITHTRaNsFORMeR wHITe gReY

ALYA dental light, arm 81 cm, with transformer, ceiling version 311400000 311403000

ALYA dental light, arm 81 cm, with transformer, with sensor switch, ceiling version 311500000 311503000

alYa96CeIlINgwITHOUTTRaNsFORMeR wHITe gReYALYA dental light, arm 96 cm, without transformer, ceiling version 311010000 311013000

ALYA dental light, arm 96 cm, without transformer, with sensor switch, ceiling version 311110000 311113000

alYa96CeIlINgwITHTRaNsFORMeR wHITe gReY

ALYA dental light, arm 96 cm, with transformer, ceiling version 311410000 311413000

ALYA dental light, arm 96 cm, with transformer, with sensor switch, ceiling version 311510000 311513000

ALYA LAMP 81 AND 96 CM ARMcEiliNg VERSiONSwitching control from unit or by foot control, with or without transformer versions available

20

L17

00

102

0

40

50

L= / 960810 H

L= H-1700-20


MAiA

The ideal solution for anyone looking for a LED operating light with high

performances at an affordable price. Faro patented Optical System

and Design.

lEdt E c h

5.000 K* k

from 3.000 to 35.000*lUX

9x6 mm ellipse*S-FX

OPticAl SYStEM PATENT N. 1847762dESigN PATENT

AVAILABLE cOlOURS :




FARO DElightYOU. 21

tEchNicAl DATA

ElEctRONic CONTROLS Switching control on the head; Switching control from unit or by foot control versions available; Electronic microprocessor for lighting adjustment from minimum to

maximum power;

OPTIONALS Remote control from the unit: allows to repeat all joystick functions; Three-axes rotation system; 24-month-guarantee extension; Complete RAL colour range.

Medical Device complies with Directive 93/42/CE and s.m.i. - Medical devices - class IApplied Standards: EN 60601-1, EN 60601-1-2, EN 60825, EN 62471; Guaranteed 12 months

GENERAL FEATURES*Power Supply 17 - 24 Vac 50/60 Hz - 22 - 35 Vdc

With transformer 230V - 50/60Hz

Absorbed Power max 9 VA

Lighting source 2 LED


Cooling System static heat sink (no fan required)

Handles removable and autoclavable

L. 750/900 68 550

Standard pin Ø 35



3Rd AXiS

ROTATIONPerfect balance of the 2-D rotation

system on the two axes of the head. As an option a 3-D system on the third rotation axis which

allows better positioning is available.

3D technology

2D technology

2d3d

FARO DElightYOU. 23

MAiA VERSIONS

MaIa75UNITwITHOUTTRaNsFORMeR CODeMAIA dental light, arm 75 cm, without transformer, with sterilizable open handles 320010300

MAIA dental light, arm 75 cm, without transformer, switching On/Off from dental unit and with sterilizable open handles 322010300

MAIA dental light, arm 75 cm, without transformer, with sensor switch and with sterilizable open handles 320110300

MaIa90UNITwITHOUTTRaNsFORMeR CODeMAIA dental light, arm 90 cm, without transformer, with sterilizable open handles 320020300

MAIA dental light, arm 90 cm, without transformer,switching On/Off from dental unit and with sterilizable open handles 322020300


MaIa75UNITwITHTRaNsFORMeR CODeMAIA dental light, arm 75 cm, with transformer, with sterilizable open handles 320410300

MAIA dental light, arm 75 cm, with transformer, switchingOn/Off from dental unit and with sterilizable open handles 322410300

MAIA dental light, arm 75 cm, with transformer, with sensor switch and with sterilizable open handles 320510300

MaIa90UNITwITHTRaNsFORMeR CODeMAIA dental light, arm 90 cm, with transformer, with sterilizable open handles 320420300

MAIA dental light, arm 90 cm, with transformer,switchingOn/Off from dental unit and with sterilizable open handles 322420300


MAIA LAMP 75 AND 90 CM ARMdENtAl UNit VERSiONSwitching control from unit or by foot control, with or without transformer versions available

3RD AXIS MOVEMENTVERSION AVAILABLE

750

1750

40°

50°

1380

( 135

0 )

( 108

0 )


MaIa75CeIlINgwITHOUTTRaNsFORMeR CODeMAIA dental light, arm 75 cm, without transformer, with sterilizable open handles 325010300


MaIa75CeIlINgwITHTRaNsFORMeR CODeMAIA dental light, arm 75 cm, with transformer, with sterilizable open handles 325410300


MaIa90CeIlINgwITHOUTTRaNsFORMeR CODeMAIA dental light, arm 90 cm, without transformer, with sterilizable open handles 325020300


MaIa90CeIlINgwITHTRaNsFORMeR CODeMAIA dental light, arm 90 cm, with transformer, with sterilizable open handles 325420300



MAIA LAMP 75 AND 90 CM ARMcEiliNg VERSiONSwitching control from unit or by foot control, with or without transformer versions availableH

40°

50°

933

1700

L

20

750

L=H-1700-20


Edi

Advanced design and a powerful halogen light source scattered by a double glass dish. EDI has a sophisticated mechanism to

facilitate the orientation of the light. Available with two or three

axes movement.

AlOt E c h

5.000 K* k

from 8.000 toover 25.000*lUX

12x8 mm ellipse*S-FX

dESigN PATENT

AVAILABLE cOlOURS :




FARO DElightYOU. 27

tEchNicAl DATA

ElEctRONic CONTROLS Switching control on the head or by proximity sensor; Microprocessor assisted fan cooling system; Opened Sterilizable or Fixed and Fork handgrips.

OPTIONALS Three-axes rotation system; Complete RAL colour range.

Medical Device complies with Directive 93/42/CE and s.m.i. - Medical devices - class IApplied Standards: EN 60601-1, EN 60601-1-2; Guaranteed 12 months

GENERAL FEATURES*Power Supply 17 V - 50/60 Hz

With transformer 230 V - 50/60 Hz

Absorbed Power 95 VA

Lighting source 1 halogen 17 V - 95 W


Cooling System forced with fan

Handles fixed or removable and autoclavable

L. 750/900 68 550

Standard pin Ø 35



3D technology

2D technology

2d3d

3Rd AXiS

ROTATIONPerfect balance of the 2-D rotation

system on the two axes of the head. As an option a 3-D system on the third rotation axis which

allows better positioningis available.

FARO DElightYOU. 29

VERSIONI Edi

eDI75UNITwITHOUTTRaNsFORMeR CODe

EDI dental light, arm 75 cm, without transformer, with fixed handles and sterilizable forked lower handle 306010000

EDI dental light, arm 75 cm, without transformer, with sterilizable open handles 306010300

EDI dental light, arm 75 cm, without transformer, with sensor switch, with fixed handles and sterilizable forked lower handle 306110000

EDI dental light, arm 75 cm, without transformer, with sensor switch and with sterilizable open handles 306110300

eDI90UNITwITHOUTTRaNsFORMeR CODe



EDI dental light, arm 90 cm, without transformer, with sensor switch and with fixed handles and sterilizable forked lower handle 306120000


eDI75UNITwITHTRaNsFORMeR CODe

EDI dental light, arm 75 cm, with transformer, with fixed handles and sterilizable forked lower handle 306410000

EDI dental light, arm 75 cm, with transformer, with sterilizable open handles 306410300


EDI LAMP 75 AND 90 CM ARMdENtAl UNit VERSiONSwitching control from unit or by foot control, with or without transformer versions available





EDI dental light, arm 90 cm, with transformer, with sensor switch, with fixed handles and sterilizable forked lower handle 306520000

EDI dental light, arm 90 cm, with transformer, with sensor switch and with sterilizable open handles 306520300

eDI75CeIlINgwITHOUTTRaNsFORMeR CODe



EDI dental light, arm 75 cm, without transformer, with sensor switch, with fixed handles and sterilizable forked lower handle 307110000






EDI LAMP 75 AND 90 CM ARMcEiliNg VERSiONSwitching control from unit or by foot control, with or without transformer versions available

FARO DElightYOU. 31

eDI75CeIlINgwITHTRaNsFORMeR CODe





eDI90CeIlINgwITHOUTTRaNsFORMeR CODe



EDI dental light, arm 90 cm, without transformer, with sensor switch and with fixed handles and sterilizable forked lower handle 307120000


eDI90CeIlINgwITHTRaNsFORMeR CODe






Easy to fit Changes the light emission spectrum avoiding the activation of

the composites Reduces the effect of curing by over 99.9% on resins with

photoactivator sensitive between 360 and 520 nm Sterilizable at 121°c (guaranteed up to 40 cycles)

POliblOckAntipolimerization filter for composites

AccESSORiES

LED LAMPS ALYA AND MAIASPECIFIC ACCESSORY

avaIlaBIlITY CODePOLIBLOCK, Anti-polymerization Filter (only for ALYA and MAIA lamps) 3 1 0 2 1 5

FARO DElightYOU. 33

Unique adults size Unique children size Sterilizable at 121°c

Help for the full protection of the delicate eyes of children and patients with eye diseases

New sanitizing composition Specific for odonthoiatric cabinets Reflectors and plastic surfaces cleaner Antistatic, not polluting and over 90%

biodegradable

Detergent for dental lamps and monitorsPERFlEX

blUE bAN & bAbY blUE bAN

avaIlaBIlITY CODeBLUE BAN, adult glasses 310374

BABY BLUE BAN, child glasses 310378

avaIlaBIlITY CODePERFLEX, Detergent for dental light (ml.100) 310205


iNSidE

Intraoral endoscope: the new FARO patented system capable

of satisfying all needs in modern dentistry. Maximum comfort for the

operator and the patient.

0051



FARO DElightYOU. 35

ElEctRONic CONTROLS The system consists of an Endoscope (in stainless steel) complete with an

articulated arm and an integrated electronic board; It contains an electronic system to manage the images.

This makes it possible to work in the mouth with indirect vision: the operator visualizes the operating field on the monitor and obtains a perfectly coherent image on the screen by rotating and mirroring this image;

autonomous illumination of the operating field by LED light; automatic cleaning system of the fiber optic by compressed air which

allows the use of instruments with a spray; easy to use control panel integrated in the articulated arm; Freeze frame with integrated mosaic function; Analogic RCA video output; Available in different versions for dental unit, wall, ceiling or self standing

structure applications; Protection accessory kit with an easily detachable and sterilizable mirror

for a direct 90° vision; Class IIa medical device.


ADVANTAGES OF ENdOScOPE

MagNIFICaTION OF THE AREA TO BE TREATED

UPRIgHTWORKING POSITION

VISION ON THE MONITOR

Higher precision of intervention Reduced eye fatigue Access to all working areas

Physiological position with upright head and neck

Muscle fatigue and osteo-articular pathologies reduction

More comfort for the operator Reduction of cross contamination

Better communication with the patient Understanding and acceptance of the

treatment plan Valorisation of the work of the doctor Possibility to store all the images and

videos on digital devices continuous training

FARO DElightYOU. 37

iNSidE VERSIONS

PReMIUMINsIDeseTUNITveRsION CODe

Inside Premium Set: Inside endoscope (643000), Inside holder arm l. 750 (377000), freeze box (377050), 17” LCD Monitor (302647002), monitor holder arm (375000020), set handle (303165), internal cables version

KT643750P

Inside Premium Set: Inside endoscope (643000), Inside holder arm l. 400 (377100), freeze box (377050), 17” LCD Monitor (302647002), monitor holder arm (375000020), set handle (303165), internal cables version

KT643400P

Inside Premium Set: Inside endoscope (643000), Inside holder arm l. 750 (377000001), freeze box (377050), 17” LCD Monitor (302647002), monitor holder arm (375000020), set handle (303165), external cables version

KT643750PE

Inside Premium Set: Inside endoscope (643000), Inside holder arm l. 400 (377100001), freeze box (377050), 17” LCD Monitor (302647002), monitor holder arm (375000020), set handle (303165), external cables version

KT643400PE

BasICINsIDeseTUNITveRsION CODe

Inside Basic Set: Inside endoscope (643000), Inside holder arm l. 400 (377100), freeze box (377050), internal cables version KT643750B

Inside Basic Set: Inside endoscope (643000), Inside holder arm l. 750 (377000), freeze box (377050), internal cables version KT643400B

Inside Basic Set: Inside endoscope (643000), Inside holder arm l. 400 (3771000001), freeze box (377050), external cables version KT643750BE

Inside Basic Set: Inside endoscope (643000), Inside holder arm l. 750 (3770000001), freeze box (377050), external cables version KT643400BE

INSIDE SETdENtAl UNit VERSiONInside Endoscope with a special arm, freeze box, with or without medical monitor.


PReMIUMINsIDeseTCeIlINgveRsION CODe

Inside Premium Set ceiling version - Inside endoscope (643000), Inside ceiling arm l. 750 (377000010), freeze box (377050), 17” LCD monitor (302647002),Monitor holder ceiling arm L.600 (375062000), set handle (303165), arm adaptation diam.60 (410305)

KT643000SP

INsIDeseTTOTeMveRsION CODe

Totem Inside Set mobile version: Inside endoscope (643000), Inside holder arm l. 750 (377000), freeze box (377050), 17” LCD Monitor (302647002), monitor holder arm (376520), set handle (303165), totem (376500) internal cables version

KT643000100T

BasICINsIDeseTCeIlINgveRsION CODe

Inside Basic Set ceiling version: Inside endoscope (643000), Inside holder ceiling arm l. 750 (377000010), freeze box (377050), ceiling application with column 130 cm (377500), external cables version

KT643000SB

INSIDE SETMObilE VERSiONInside Endoscope with a special arm, freeze box, with or without medical monitor.

INSIDE SETcEiliNg VERSiONInside Endoscope with a special arm, freeze box, with or without medical monitor.

FARO DElightYOU. 39

AccESSORiES

PROTeCTION CODeProtection accessory with easily detachable mirror 643070

aPPlICaTIONseTsAND COMPLEMENTS

02


CEILING APPlicAtiONS

Ceiling applications (with or without transformer) complete with cover, column

Ø 60 mm with pivot Ø 35 mm. The M8 X 50 mm plugs which are provided have

a capacity of 400 kg (guaranteed value for

applications in a wall of compacted concrete).

FARO DElightYOU. 43

seTswITHOUTTRaNsFORMeR CODe

Ceiling mounting without transformer (410510), column l. 130 cm (300761) and cover (408601) 300750

Ceiling mounting without transformer (410510), column l. 170 cm (300782) and cover (408601) 300780

seTswITHTRaNsFORMeRFORleD CODe

Ceiling mounting with ALYA/MAIA transformer (408770), column l. 130 cm (300761) and cover (408601) 300810


seTswITHTRaNsFORMeRFORHalOgeN CODe

Ceiling mounting with transformer (408750), column l. 130 cm (300761) and cover (408601) 300785

Ceiling mounting with transformer (408750), column l. 170 cm (300782) and cover (408601) 300795


COMPONeNTsaNDsPaRePaRTs CODe

Column l. 130 cm Ø 60 mm 300761

Column l. 170 cm Ø 60 mm 300782

Cover for ceiling mounting 408601

Ceiling application holder without transformer and without cover 408510

Ceiling application holder with 1 ALO TECH transformer, without cover 408750

Ceiling application holder with 1 LED TECH transformer, without cover 408770

Ceiling application holder with 2 LED TECH transformers, without cover 408780

Ceiling application holder with 2 ALO TECH transformers, without cover 408785

Ceiling application holder with 2 transformers: 1 ALO TECH and 1 LED TECH without cover 408790

avaIlaBIlITY CODeCovering plate for suspended ceiling 410512

The finishing touch that allows you to hide the passage of the column

through the ceiling.

6

200

COVERINGPlAtE

AccESSORiES

FARO DElightYOU. 45

avaIlaBIlITY CODeFixing guide for ceiling application support 4 1 0 5 1 3

The practical fixing guide which facilitates the installation of

the set of ceiling application.

EdiP FIXING GUIDE

Once fixed to the base plate, the guide EDIP supports the other components until the final tightening of the structure.


DUOAPPlicAtiON

“DUO” is a new ceiling fixing system which meets the diverse needs of the

medical cabinet.Its ergonomic combination makes

the most of the work area allowing complete freedom of movement. In

particular, the version with dual lamp offers the possibility of enhancing

the illumination of the surgical field and increases the scialytic effect of

the lamps, giving more comfort to the doctor and his team.

Example of ceiling mounting of an Halogen Dental lamp with a Monitor Arm.

FARO DElightYOU. 47

DUOaPPlICaTION CODe

DUO - Ceiling support for dual application of lamps,monitor/pc and camera holding arms 410264

COMPONeNTs CODeColumn for “DUO” application l. 70 cm Ø 60 mm 300783

Supports for ceiling mounting applications: see page 44 (COMPONENTS) -

In the following pages you can find some examples of ergonomic solutions. Our Technical Design Service is at your disposal to study any type of customized solution.


COMPOsITION CODeCeiling LED lamps (on your choice): see SECTION 01 - ILLUMINATION -

DUO ceiling suport 410264

Column for “DUO” application l. 70 cm Ø 60 mm 300783

Ceiling application holder with 2 LED TECH transformers, without cover 408780


For those who practice surgery, this solution offers the possibility

to increase the illumination of the surgical field and to increase the

scialytic effect giving more comfort to the doctor and his team.

ERGONOMICSOlUtiON 1

LED Lamp + LED Lamp

FARO DElightYOU. 49

1810

mm

1900

mm

from

1390

to 2

165

mm

from

1300

to 2

075

mm

2500

mm

min

.

LIghT CONTROLAdjustable power from 3,000 to 50,ooo Lux on each lamp..

ADJUSTABLE LIghT To illuminate the most difficult areas you can control two lamps individually.

SCYALITIC EFFECT The scialytic effect of the optical system FARO is further reduced thanks to the use of two alya lamps.

1

2

3

S-FXMinimum size of the net shadow required by the norms: Ø 12mm

The FARO scyalitic effect generates an ellipse of only 6x3 mm (or 9x6 mm depending on the model)

1

2 3


The benefits of a complete and elegant system, optimizing your workspace.


Fixed arm mm 400 (vertical) x 200 (horizontal) VGA with round connectorfor 17” Monitor 375011000

17” LCD Monitor 302647002





LED Lamp + fixed arm for monitor

ERGONOMICSOlUtiON 2

FARO DElightYOU. 51

2500

mm

min

.

from

1390

to 2

165

mm

1900

mm

1560

mm

1

2 3

PRACTICAL POSITIONMonitor out of sight of the patient with the possible rotation of the arm.

VIDEO POSITIONAllows patients to viewmovies or clips.

wORKINg POSITIONAdjustable screen at eye level for the job, to avoid muscle tension.

1

2

3



Ceiling-mounted articulated arm L. 600 mm (for 17” Monitor) 375062000






With the articulated adjustable monitor arm everything is possible,

raise or lower the screen: the choice is yours! The communication with the

patient is much more intuitive, the images at the service of the treatment.

LED Lamp + Articulated Arm for monitor

ERGONOMICSOlUtiON 3

FARO DElightYOU. 53

hEAD POSITIONFacilitates communication with the patient and the explanation of the treatment.

VIDEO POSITIONAllows patients to view movies or clips.

wORKINg POSITIONAdjustable screen at eye level for the job, to avoid muscle tension.

1

2

3

2500

mm

min

.

1900

mm

from

1390

to 2

165

mm

from

1400

to 18

15 m

m

150

mm

min

.

1

2 3



Articulated arm L. 600 mm for cameras 303150000





With the camera arm you can record your interventions and take pictures

from any angle. The universal connection allows the coupling of your

favorite equipment customizingyour workstation.

LED Lamp + Camera Arm

ERGONOMICSOlUtiON 4

FARO DElightYOU. 55

ADAPTABILITYThe universal mounting system allows the installation of your choice of equipment.

PRECISIONThe articulated arm allows each movement with precision and handling to facilitate all your shots.

1

2

1

2

2500

mm

min

.

1900

mm

1815

mm

from

1465

to 2

165

mm

from

1930

to 2

165

mm


Ceiling mounting of aMonitor arm with

a Camera arm.

Camera Arm + Articulated Arm for monitor

COMPOsITION CODeArticulated arm L. 600 mm for cameras 303150000

Ceiling-mounted articulated arm L. 600 mm (for 17” Monitor) 375062000






ERGONOMICSOlUtiON 5


wallMOUNTINgaPPlICaTIONs CODeWall mounting for lamps and arms 408500

Wall mounting for monitor and lamps arms.

FlOORMOUNTINgaPPlICaTIONs CODe

Floor stand with base (408801) and column 170 cm Ø 60 mm (300782) 300800

Floor mounting complete with base and Ø 60 mm column with pivotØ 35 mm.

OTHER APPlicAtiONS

FARO DElightYOU. 59

Fixed adapter lamp or arms holder for Ø 50 and Ø 60 mm columns.

Multi-arm Jaw adapter for lamps, arms, cameras and Inside with an innovative fixing system which does not need mounting holes.

POleMOUNTINgaPPlICaTIONs-sINgleaRM CODeAdapter for column Ø 60 mm (for dental light) 410290

Adapter for column Ø 50 mm (for monitor holder, Inside and tray arms) 410300

Adapter for column Ø 60 mm (for monitor holder, Inside and tray arms) 410305

POleMOUNTINgaPPlICaTIONs-MUlTIaRM CODe

Versatile adapter on the top of column 45–50 mm (for dental light, monitor, Inside and tray arms) 410600

Versatile adapter for column Ø 45-50 mm (for Inside and tray arms) 410605

Versatile adapter on the top of column Ø 45-50 mm (for Inside arm) external cables 410660

Versatile adapter for column Ø 45-50 mm (for Inside arm) with external cables 410665


avaIlaBIlITY CODeFixed arm mm 200 (vertical) x 200 (horizontal) for 17” Monitor 375000000

Fixed arm mm 200 (vertical) x 400 (horizontal) for 17” Monitor 375001000

Fixed arm mm 200 (vertical) x 200 (horizontal) VGA with round connector for 17” Monitor 375010000

Fixed arm mm 400 (vertical) x 200 (horizontal) VGA with round connector for 17” Monitor 375011000

ARMSFOR MONITORS/CAMERAS

Complete line of monitor / camera arms: a response to all installation requirements.

Supplied with VGA / Power / Stereo Audio / Video IN / IN S-VHS video

cables integrated.

Made of extruded aluminum and liquid painted Solid structure to ensure the absence of vibration and

precise movements Wide range for dental unit and ceiling applications

AVAILABLE cOlOURS :

RAL 9003RAL 9002 SPECIAL COLOURSRAL 9010 RAL 9016

FIXED ARM FOR mONITOR

FARO DElightYOU. 61

avaIlaBIlITY CODeArticulated arm L. 600 mm (for 17” monitor) 375052000

Articulated arm L. 900 mm (for 17” monitor) 375054000

avaIlaBIlITY CODeCeiling-mounted articulated arm L. 600 mm (for 17” Monitor) 375062000

CEILINg MOUNTED ARTICULATED ARM FOR mONITOR

ARTICULATED ARM FOR mONITOR

1465/17651465/1765

600/900


avaIlaBIlITY CODeArticulated arm L. 600 mm for cameras 303150000

Articulated arm L. 900 mm for cameras 303150100

avaIlaBIlITY CODe17” LCD Monitor 302647002

Handle set for FARO monitors 303165

VGA cable L. 2,5 mt with round connector Ø 17 mm 303088

VGA cable L. 4,9 mt with round connector Ø 17 mm 303089

Perflex - Detergent (100 ml) 310205

AccESSORiES

ARTICULATED ARM FOR CAmERA (mAX LOAD: 3 kg.)

163

Ø35

1375/1675

600/900

FARO DElightYOU. 63

The FARO monitor and camera arms offer many types of integrated cable to allow the connection of remote devices.

STANDARD LENGTH OF INTEGRATED CABLES: 4000 mm Monitor cable entry on: 600 mmCamera cable entry on: 300 mm

Cable entry on the pin (fixed arm l.200 horizontal): 3200 mmCable entry on the pin (fixed arm l.400 horizontal): 3000 mm

Cable entry on the pin (articulated arm l.600): 2000 mm

Subject to preventive technical evaluation

STANDARD WIRINg CONFIgURATION

wiRiNgSMONITOR/CAMERA ARMS

Our technicians are at your disposal to recommend the best configuration to suit your needs.


ARMSWITH TRAY

Standard arm load 1-2 Kg Tray load up to 4 Kg blocking the

clutch

Experience and attention to the needs of professionals.

Arms with tray available in different versions. They can be fitted to the dental unit or installed on a floor

stand, giving an additional working surface.

ARTICULATED ARM WITh TRAy

avaIlaBIlITY CODeArticulated arm with tray L. 600 mm 302530

Articulated arm with tray L. 400 mm 302537

FARO DElightYOU. 65

FIXED ARM WITH TRAy

ARM WITh TRAy

avaIlaBIlITY CODeFixed arm with tray L. 600 mm 302580

avaIlaBIlITY CODeArm with tray 302570


ARM WITh TRAy AND COLUmN FOR DENTAL UNIT mOUNTINg

ARM WITh TRAy AND COLUmN FOR DENTAL LIghT

avaIlaBIlITY CODeArm with tray and column for dental unit 302330

avaIlaBIlITY CODeArm with tray and column for dental light 302310

FARO DElightYOU. 67

ARM AND FLOOR STAND WITh SPECIAL COLUmN FOR DENTAL LIghT

ARM WITh TRAy AND FLOOR STAND WITh COLUmN

avaIlaBIlITY CODeArm with tray and floor stand with column 302320

avaIlaBIlITY CODeArm with tray and floor stand (408801) with special columnfor dental light 302315



Articulated arm with tray L. 600 mm 302530

Adapter for column Ø 60 mm (for dental light) 410290


The simplest solution and ergonomic for the installation of an additional

bearing surface.

SOlUtiONFOR TRAY HOLDING

LED Lamp + Arm with tray

FARO DElightYOU. 69

LIFTED POSITIONThe upper position allows greater flexibility of movement and access to the sink.

ERgONOMICBy lowering the shelf to 70 cm you will get the best working position.

LIghTINgThe correct position to allow a complete action of the light beam.

1

2

3

1500

mm

1930

mm

from

1420

to 2

165

mm

2500

mm

min

.

from

800

to 16

00 m

m

1

2 3

sTeRIlIZaTION

03sTeRIlIZaTIONAND WATER TREATMENT


sK07AUTOCLAVE

16 -21

High-tech class B autoclave, with an attractive and ergonomic design. Highly reliable, standing out for extremely low power and distilled water

consumption.

0051



FARO DElightYOU. 73

ElEctRONic CONTROLS User-friendly Control panel with 4 buttons LCD Display to visualize instructions and information Status of the different components indicated by icons Control of the physical cycle characteristics A safety system monitors every phase of the sterilization cycle and

informs of any failure Performs fractioned vacuum phases, as required for B-type cycles: (121°C - 134°C -

134°C B-Flash - 134°C Prion) and test cycles: Bowie and Dick, Helix Test, Vacuum Test B Flash cycle can reduce the sterilization process time for small loads (up to 0,5 kg) Conforms to the EN13060 Standard Direct connection to the main water supply Quick coupling faucets to rapidly fill the filling tank with water and drain the

draining tank Multi-level tray holder with three trays to place the materials to be sterilized Automatic loading tank by integrated water pump Volume of load tank 3,65 lt Long autonomy: 10-12 cycles (version 16) or 7-8 cycles (version 21) with a single

load of distilled water in the integrated tank Low consumption of water and energy thanks to a dosage system of the

water in chamber and the copper chamber (best heat conductor) Maximum uniformity: the temperature and the pressure remain steady inside

the sterilization chamber Perfect drying phase


SK07 VERSIONS (16 and 21)

DemineralizerWhen there is a direct connection to the water supply, the demineralizer solves the problem of limescale in the water inlet, to preserve the efficiency of the autoclave and to ensure its functionality.

Diagnostic software SK07 AGENTWith this software the technical assistance can have access, in a reserved section, to a historical archive of cycles, and can activate devices for monitoring and rapid fault diagnosis.

Direct connection to the water supply Quick plug valves for loading and unloading of the water

SK07 16 and 21iNtEgRAtEd PRiNtERthe printing or data storage devices are housed inside the lower door.

SK07 16 and 21cOMPAct FlAShMemory card type: Compact Flashrecord the cycles by means of the specific SK07 Agent Compact Flash software supplied

SK07 16 and 21EXtERNAl PRiNtERwith a connection to an external printer which allows coupon printing with detailed information about each cycle.

FARO DElightYOU. 75

aCCessORIes CODe1 Software for SK07, diagnostic software for technical assistance 742619

CD software for compact flash 742862

Memory Card 1 Gb 742863

Tray (16 lt) 711029

Tray holder (16) for 3 trays 74 2 1 1 2

Tray holder (16) for 3 or 5 trays 742885

Tray (21) 745022

Tray holder (21) for 3 trays 745021

2 Water demineralization machine (with cartridge) 7426903 External printer 742200

AccESSORiES

sK07-16ClassB CODe

SK07 - Class B autoclave with integrated printer and connection to the main water supply 742500

SK07 - Class B autoclave with Compact Flash-Memory Card complete with memory card software and connection to the main water supply 742750

SK07 - Class B autoclave prepared for an external printer (ref. 742200) 742900

sK07-21ClassB CODe

SK07 - Class B autoclave with integrated printer and connection to the main water supply 745000

SK07 - Class B autoclave with Compact Flash-Memory Card complete with memory card software and connection to the main water supply 745100

SK07 - Class B autoclave prepared for an external printer (ref. 742200) 745200

1 2 3


CHeMICalINDICATORS

Complete set of tests for monitoring the functions of the autoclave.

avaIlaBIlITY CODe

Steriking for the validation of the steam autoclaves(250/500 pcs) 708010

Bowie & Dick Test to check the penetration of the steam in the textil and porous materials 708020

Helix test complete with 25 stripes to check the penetration of the steam inside the hole bodies 739197

Stripes for Helix test (50 pcs) 739235

FARO DElightYOU. 77

DROPPYsWATER PURIFIER

Water purifier: fast and efficient.

3 lt of purified water in less than 5 hours Perfect to supply an autoclave 6 carbon filters included automatic turn off at the end of the purification process 4 lt carafe included Dimensions Ø 23 cm H. 36 cm Weight 3,5 kg

avaIlaBIlITY CODeDroppy S water purifier 730100

sPaRePaRTs CODe1 Carbon filter (12 pcs) 7301072 Cleaning solution (500 gr.) 7301083 Tank for Droppy-S 730109

AccESSORiES

1 2 3


CalBeNIUM Sanitizes the water of the dental complex, noticeably reducing the risk of contamination by viruses and bacteria. Also effective for elimination of calcareous concretions, weeds and biofilm within the pipes of the dental complex.

COCCIBROM allows verification of the bacteriological reset of the water present in the pipes of the dental complex. To be used every 15 days.

aQUaNIUM is a tablet for sanitizing the water basin of the dental unit. The duration of a tablet is approximately one month.

CalBeNIUM CODe1 Calbenium solution (1 litre) mint flavor 7092461 Calbenium solution (1 litre) apple flavor 7092642 Calbenium powder (160 gr) mint flavor 709190

COCCIBROM CODeCoccibrom, disinfectant solution (250 ml) 709262

aQUaNIUM CODe

Aquanium, tablets (4 pcs) for Aquaniumatic the filter for the sanitising of the basin water in the dental unit 709249

waTeRTREATMENT

10499 2

INsTRUMeNTs

04INsTRUMeNTsFOR DENTAL CABINETS


s333TURBINE

Power, reliability and accuracy in all conditions of use.24-MONTH-GUARANTEE

NEW

Rotation speed> 340000, Weight 55 g Embedded optical fibers which allow accurate cleaning Strong hold chuck, more than 3.5 kg, to work safely Perfectly balanced rotor, head Ø 12.5 mm Ceramic ball bearings with integral screen to improve lubrication Non-return valve inside of the turbine so as not to spread contamination Led> 25,000 lux on the quick connection FARO type 3 cooling sprays Noise reduction (<65 db) thanks to a careful study of fluid dynamics Reduced power consumption:

• Maximum water ml / min 80, • max air 32 l / min, • Pressure 2.9 ± 0.1

Long life of the caliper thanks to the new profile and to the use of special materials

the weight of only only 55 g, the surface treatment which increases the grip with gloves and its design is the result of a meticulous study of ergonomics.

Available for FARO and KAVO quick connection

0051



FARO DElightYOU. 81

lUBRICaNTs CODeAdapter for lubricant spray turbine handpiece FARO type 041080

Adapter for lubricant spray turbine handpiece Kavo type 041080500

Lubricant spray with adapter for turbine handpiece FARO Type 041085

Lubricant spray with adapter for turbine handpiece Kavo type 041085500

Lubricant spray without adapter (ml. 200) 058050

avaIlaBIlITY CODes333 Turbine lux FARO connection 045000000

s333 Turbine lux Kavo connection 045000500

AccESSORiES

1

1

2 3

1

aCCessORIes CODe1 Electrified quick connector with fiber optic 041250000

Quick connector 4 way 041250100

Quick connector 3 way 0412502002 Led assembly FARO turbine 0411100002 Led assembly Kavo turbine 0411105003 Led assembly Bien Air turbine 041110750


COMPONeNTs for fiber optic circuits CODe

1 Potentiometer 1 Kohm (for light intensity item 054616) 054614

1 Potentiometer 10 Kohm (for light intensity item 054595) 054597

1 Potentiometer 1 Mohm (for prolonged power offtimer item 054595) 054598

2 Electropneumatic switch 2 2 4 3 3 13 3 Way nylon connection for internal tube Ø 1,6 mm 250106

4 3 Way metal connection: 2 Way for internal tube Ø 2,6 mm and 1 Way for internal tube Ø 1,6 mm 2 5 0 1 2 3

eleCTRONICCONTROlBOaRDsfor fiber optic CODe

1 Standard electronic control for fiber optic instruments with adjustment of the light intensity and prolonged power off timer 054595

1 Miniature electronic control for fiber optic instruments with light intensity adjustment 054616

CORDONIsIlICONaTIper tu r b i n e CODe1 Grey silicone cable 3 way Borden connection l. 1,80 m 052020 1 Grey silicone cable 4 way l. 1,80 m 058850 1 Black silicone cable 4 way with fiber optic l. 1,80 m 058940 1 Grey silicone cable 4 way with fiber optic l. 1,80 m 058845

2 Grey silicone cable Unified 4 ways with fiber optic l. 1,80 m (for turbine handpieces, Modo Infinity Unified micromotor and Bien Air MC3 micromotor) 052200

1

1

1

2

2

2

3 4

FARO DElightYOU. 83

MC01CONTRA-ANGLES AND STRAIGHT

HANDPIECES

Perfectly balanced Instrument Ergonomic Design for a safe hold Single integrated spray Non-retraction anti-contamination valve Push button chuck Straight handpiece drill insertion and release with rotating bezel High brightness fiber optic Compatible with electric or air motors fitting ISO connection 3964

avaIlaBIlITY wITHFIBeROPTIC wITHOUTFIBeROPTIC

MC01 red contra-angle 1:4,25 235000100 235000000

MC01 green contra-angle 6:1 235100100 235100000

MC01 blue contra-angle 1:1 235200100 235200000

MC01 straight handpiece 1:1 - 235300000

Complete line of contra-angles that combine mechanical reliability

and strength with a minimalist and ergonomic design.0051




sM3SYRINGE

3 cold-functions siringes.

aCCessORIesaNDsPaRePaRTs CODe1 Grey silicone cable with metal ring nut l. 1.80 m for SM3 093550

Metal nozzle SP0914602 Plastic nozzle SP091554

avaIlaBIlITY CODe

Set SM3 dental syringe metal body with grey silicone cable 091940

SM3 - only - 3 function dental syringe metal body 091900

AccESSORiES

21

NEW

Metal housing with removable nozzles and secure sterilizable at 121 °C/135 °C

New generation internal body Proportional system of air and water supply

0051



FARO DElightYOU. 85

sM6SYRINGE

avaIlaBIlITY CODe

Set SM6 dental syringe metal body with grey silicone cable 091980

SM6 - only - 6 function dental syringe metal body 091950

AccESSORiES

1

NEW

6 cold/hot-functions siringes.

aCCessORIesaNDsPaRePaRTs CODe1 Grey silicone cable with metal ring nut l. 1.80 m for SM6 093550

Metal nozzle SP091460

Plastic nozzle SP091554

Metal housing with removable nozzles and secure sterilizable at 121 °C/135 °C

New generation internal body Proportional system of air and water supply

0051




sYR3THREE-FUNCTION SYRINGE

Essential design and ergonomic metal housing resistant to

sterilization.

0051



Metal housing with twist-off nozzle, autoclavable at 121 °C/135 °C Two metal nozzles: a straight one and an angled one It can be detached from the power cord by unscrewing the

connecting ring

FARO DElightYOU. 87

aCCessORIesaNDsPaRePaRTs CODeSYR 3 Straight - only - 3 function dental syringe metal body 094000

SYR 3 Angled - only - 3 function dental syringe metal body 094000001

Grey silicone cable with metal ring nut l. 1.80 m 094200

Straight Metal nozzle SP094001

Angled Metal nozzle SP094004

Straight Plastic nozzle SP094048

Angled Plastic nozzle SP094049

avaIlaBIlITY CODe

Set SYR 3 Straight - dental syringe metal body with grey silicone cable 094000100

Set SYR 3 Angled - dental syringe metal body with grey silicone cable 094000101

AccESSORiES


POlIsCaleRPIEzOELECTRIC SCALER

Manageable and versatile scaler, with adjustable frequency and high efficiency. It is supplied as standard

with 3 standard tips.

Light, handy and compact size Handpiece and tips sterilizable at 121 °C/135 °C Complete with box for the sterilization of the handpiece, tips and

dynamometric key Available in the unit version with control board and in the stand

alone version with P-Mobile control box

0051



FARO DElightYOU. 89

aCCessORIesaNDsPaRePaRTs CODePoliscaler handpiece 652010

Silicone cable for Poliscaler and Poliled with Poliscaler connection 6520501 Tip D1 6520262 Tip D2 6520213 Tip D3 6520224 Tip D4 6520235 Tip D5 652027

Sterilizable Box 652020

Key 652024

avaIlaBIlITY CODe

Set Poliscaler, scaler with cable, sterilizable box, electronic control, key and 3 tips (type D2, D3 e D4) 652000

Set P-Mobile, stand alone version, scaler with cable and control box, sterilizable box, key and 3 tips (type D2, D3 e D4) 652000010

AccESSORiES

1 23 4 5

COMPONeNTs

05COMPONeNTs

FOR DENTAL UNITS

FARO DElightYOU. 93

FOOTPeDalsA complete line of foot pedals for dental units

24-MONTH-GUARANTEE

FOOTPeDals CODeElectropneumatic foot pedal P2L1 (base mm.15 - kg. 2,8) 224900000

Electropneumatic foot pedal P2L1 (potentiometer 10 khom and base mm.15 - kg. 2,8) 224900001

Electropneumatic foot pedal P2L1 (base mm.20 - kg. 3,5) 224900005

Pneumatic foot pedal P2L1 (base mm.15 - kg. 2,8) 224900100

Pneumatic foot pedal P2L1 (base mm.20 - kg. 3,5) 224900105

Electric foot pedal P2L1 224900200

Foot pedals with functions: Chip air, Spray, Motive air Activates all functions of the instruments, while avoiding any risk of cross

contamination The electric and electropneumatic versions are equipped with

potentiometer for micromotor Production of special foot pedals for every need


PNeUMaTICseleCTIONvalves CODe1 Miniature pneumatic valve, 4 way, 1 stage without air supply connectors plate 223201 2 Complete miniature valve 4 way, 1 stage with plate pneumatic operation 223202 3 Complete miniature valve 4 way, 2 stages with plate pneumatic operation 223149 4 Complete miniature valve 4 way, 3 stages with plate pneumatic operation 223345

1 2 3 4

Complete range of valves. Every single valve manages all the supplies necessary for the functioning of a dynamic device

Valve components for the assemblage of additional levels

eleCTRICalseleCTIONvalvesC.C. CODe1 Miniature electrical valve, 4 way, 1 stage without air supply connectors plate 223250 2 Complete miniature valve 4 way, 1 stage with plate electrical operation 223280 3 Complete miniature valve 4 way, 2 stages with plate electrical operation 223290 4 Complete miniature valve 4 way, 3 stages with plate electrical operation 223300

1 2 3 4

eleCTRICalseleCTIONvalvesa.C. CODe1 Miniature electrical valve, 4 way, 1 stage without air supply connectors plate 223255 2 Complete miniature valve 4 way, 1 stage with plate electrical operation 223285 3 Complete miniature valve 4 way, 2 stages with plate electrical operation 223295 4 Complete miniature valve 4 way, 3 stages with plate electrical operation 223305

1 2 3 4

valves

FARO DElightYOU. 95

COMPONeNTsfor assembly valves CODeThreaded tie rod 1 stage (L=33mm) 223208

1 Threaded tie rod 2 stages (L=55mm) 2231662 Lock nut threaded tie rod 6090253 Plate without connector 2231554 Plate with connectors (1-2 stages only) 2231465 O’ring gasket for plate 055019

3 41 52

cOMPONENtS


HYDROPNEUMATIC AND PNEUMATIC cOMPONENtS

COMPONeNTsFORasseMBlY CODe5 Hose coupling 224803

6 Pressure gauge 0-12 1/8” MTG 2248027 Connector tubes G 1/8” internal tube Ø 4 mm - external tube Ø 6 mm 2240797 Connector tubes G 1/8” internal tube Ø 6 mm - external tube Ø 8 mm 224087

8 Plug G 1/8” 224807

COMPONeNTsFORaIRaNDwaTeRsUPPlYsYsTeM CODe1 Air cleaner 1/8” MTG 2248002 Pressure air reducer 1/8” MTG 2248053 Water cleaner 1/8” MTG 2248014 Pressure water reducer 1/8” MTG 224806

3 4

7

1

5 86

2

CONNeCTORs CODe1 Connector M4.5 for internal tube Ø 1,5/2,0 mm (to be cemented) 2501032 Connector M4.5 for internal tube Ø 1,5/2,0 mm (use Nylon gasket 250131) 2501293 Connector M4.5 for internal tube Ø 1,5/2,0 mm (use o’ring gasket 171005) 250101

1 2 3

FARO DElightYOU. 97

1 2 3

1 42 3

CONNeCTORs CODe1 Connector M4.5 for internal tube Ø 3,2 mm (to be cemented) 2501022 Connector M4.5 for internal tube Ø 3,2 mm (use Nylon gasket 250131) 2501281 Connector M4.5 for internal tube Ø 2,6 mm (to be cemented) 2501482 Connector M4.5 for internal tube Ø 2,6 mm (use Nylon gasket 250131) 2501493 Connector G 1/8” for internal tube Ø 6 mm 224602

PlUgsaNDgasKeTs CODe1 Plug (to be cemented) 2501042 Plug (use Nylon gasket 250131) 2501373 Plug (use o’ring gasket 171005) 2500144 Nylon gasket 2 5 0 1 3 15 O’ring gasket 171005

1 42 53

CONTROlvalves CODe1 Control valve with knob and with Air and Water plates 1180302 Water and Air control valve without knob internal Ø 1,6 mm 1170703 Water and Air control valve without knob internal Ø 2,6 mm 2003674 Water and Air control valve outside Ø tube max. 3,2 mm 224170


INsTRUMeNTs

42 51 3 6

UTIlITIesFORCONNeCTIONs CODe1 Universal body for junction with different connections 2500292 Air valve with flow rate and discharge control 224665

1 2

CONNeCTIONs CODe1 Through connector with air control 2244282 3 Way nylon connection for internal tube Ø 1,6 mm 2501063 3 Way metal connection for internal tube Ø 1,6 mm 2501054 3 Way metal connection for internal tube Ø 3,2 mm 2501455 3 Way metal connection: 2 Way for internal tube Ø 2,6 mm and 1 Way for internal tube Ø 1,6 mm 2501236 Hose coupling, 1 connector internal tube Ø 3,2 mm and 1 connector internal tube Ø 1,6 mm 250146

COMPONeNTs CODe1 Electropneumatic switch 224331

2 Connector wit one large inlet Ø 3,2 mm and 3 small outlets Ø 1,6 mm 234248

COMPONeNTs-valves CODeWater valve for instrument selection 223400

1 3 Way valve for housing and foot control 2240352 Double one-way valve 2242653 Water compensator 60 mm 2246394 Water compensator 10 mm 2246795 Unidirectional valve 224700

2

2 3 51 4

1

06INsTRUMeNTs

FOR LABORATORIES

FARO DElightYOU. 101

laBORaTORYHaNDPIeCesHAMMER HANDPIECES

A tradition of reliability and robustness to ensure

maximum precision and power.

laBORaTORYHaNDPIeCes Speed up to 22.000 rpm Running on self-regulating ball bearings Available with different connections: flexible, american and duplex

HaMMeRHaNDPIeCes The whole structure is made of metal Small size: Ø 19,5 mm Adjustable power by a knurled ring-nut

avaIlaBIlITY CODeLaboratory handpiece Ø 2,35 mm 010000

Laboratory handpiece Ø 3,00 mm 014000

Laboratory handpiece Ø 2,35 mm flexible shaft connection 011000

Laboratory handpiece Ø 2,35 mm duplex connection 011020

Laboratory handpiece Ø 2,35 mm USA connection 012000

Hammer handpiece HM20 020650

FARO SPAOrnago (Italy)


SUSPENdEdMOTOR SETS

A tested and reliable mechanism to ensure maximum flexibility in the

absence of vibrations.

Double insulated electronic rheostat High torque even at low speed Power 300 W Speed 22.000 rpm Electronic rheostat to ensure a good

progression of the rotation speed of the motor

Rheostat speed: 8.000 to 22.000 rpm “Contronic” version speed: 3.000 to 20.000 rpm

Very robust flexible shafts can withstand considerable and prolonged stress



COMPONeNTsaNDsPaRePaRTs CODeMotor 230/240V 486500

Electronic round rheostat 482200

Electronic round rheostat 240V UK 482240

Electronic round rheostat Contronic 482500

Clamp stand 469220

Motor brush 484011

Rheostat brush 458020

FleXIBlesHaFTs CODeFlexible shaft Ø 5,00 mm, l. 950 mm 082250

Stiffened flexible shaft Ø 5,00 mm, l. 950 mm 082330

Flexible shaft Ø 6,00 mm, l.1100 mm 082400

AccESSORiES

avaIlaBIlITY CODe

Set: Laboratory motor 230/240V (486500), electronic rheostat (482200) and flexible shaft Ø 5 mm (082250) KT486100

Set: Laboratory motor 230/240V (486500), electronic rheostat (482200) and stiffened flexible shaft Ø 5 mm (082330) KT486110

Set: Laboratory motor 230/240V (486500), electronic rheostat Contronic (482500) and stiffened flexible shaft Ø 5 mm (082330) KT486550

Set: Laboratory motor 230/240V (486500), electronic rheostat (482200) KT486400

Set: Laboratory motor 230/240V (486500), electronic rheostat Contronic (482500) KT486505

Set: laboratory motor 230/240V (486500), electronic rheostat (482240) and flexible shaft Ø5 (082250) KT486280

Set: laboratory motor 230/240V (486500), electronic rheostat (482240) and flexible shaft Ø6 (082400) KT486281


AccESSORiES

avaIlaBIlITY CODeWet model trimmer with abrasive disc 478000

DIsCs CODeAbrasive disc n. 24 478043

Diamond disc for dry model trimmer 478401

MODelTRIMMeR

The disk can be easily replaced by the end-user Powerful motor which guarantees short working times Rotation speed: 1.450 rpm Motor power: 360 W Regulation valve of water flow Automatic water flow on the disc when the machine starts

Water model trimmers: a solid and powerful motor resistant

to any condition of use. Easy to use and to maintain.



NOtES:

FARO S.p.A., founded in 1948 by Osvaldo Favonio, designs and produces equipment for the manufacturer of dental units, dental cabinets and dental laboratories.

In over 5,000 square meters of the production plant in Ornago (MB), both the production and the design and research & development take place.

Over the years, the Company has earned the position as world leader in the specific sector, a role gained thanks to the technology and design research and the ability to understand the real needs of end users.

Total quality, assured by the internal management of the entire production cycle and by a qualified and efficient pre- and post-sales service.

FARO experience best expresses the pride of a total-made-in-Italy product.


m90

5003

01 R

EV.2

_IN

g

FARO S.p.A. via Faro, 15 - 20876 Ornago (MB) - Italy Tel. +39 039.68781 - Fax +39 039.6010540 www.faro.it - [email protected]

FARO FRANCE za Tgv Coriolis - 71210 Monchanin - FranceTel. +33 385.779680 - Fax +33 385.779688www.farofrance.com - [email protected]

FARO DEuTSCHLAND GMBH Gewerbepark Heideckhof Heideckstr. 179D-47805 Krefeld - Germany Tel. +49 2151.936921 - Fax +49 2151.936933 www.faro.it - [email protected]

Certified Company

ISO 9001:2008 ISO 13485:2003

INFO LINE:

Catalogo Faro

Documents

Transcript of Catalogo Faro