Catálogo de productos Larivière 2012

- 1 -

Products

X-Ray film digitizer

VIDAR DiagnosticPRO Advantage 3

VIDAR Sierra Advantage 5

VIDAR DosimetryPRO Advantage (Red) 7

VIDAR CAD PRO Advantage 9

VIDAR Dental Film Digitizer 11

DICOM Film Acquisition Software 13

Radiological meeting rooms AcuScreenPRO DICOM 16

DICOM14 Calibration Solutions for projectors 18

Visualizer - Desktop Visualizer VZ-9plus³ 19

Visualizer - Ceiling Visualizers VZ-C12³ / VZ-C32³ 20

Visualizer - Lightboxes LB-38 and LB-9 21

Matrox Graphics Board, Xenia Series 23

Service

Warranty upgrade programme for the new VIDAR digitizer 25

Maintenance contracts for VIDAR digitizer 26

Casestudies and Whitepapers

Casestudies

Radiological clinic at the Bremen Mitte Klinik 28

Whitepaper

Realizing the Benefits of full-field digital Mammorgaphy 30

Technical Service

Our service department 39

Service call workflowchart 42

Shipping instructions for VIDAR digitizers 43

Company Information

Company profile 46

Contact persons 47

International telefon numbers 48

- 3 -


VIDAR DiagnosticPRO Advantage

- 4 -


VIDAR DiagnosticPRO Advantage

- 5 -


VIDAR Sierra Advantage

- 6 -


VIDAR Sierra Advantage

- 7 -


VIDAR DosimetryPRO Advantage (Red)

- 8 -


VIDAR DosimetryPRO Advantage (Red)

- 9 -


VIDAR CAD PRO Advantage

- 10 -


VIDAR CAD PRO Advantage

- 11 -


VIDAR Dental Film Digitizer

- 12 -


VIDAR Dental Film Digitizer

- 13 -

DICOM Film Acquisition Software

VIDAR Clinical Express | General Radiolgraphy & Mammography

- 14 -

DICOM Film Acquisition Software

VIDAR Clinical Express | General Radiolgraphy & Mammography

- 15 -

- 16 -

- 17 -

- 18 -

DDIICCOOMM--1144 CCAALLIIBBRRAATTIIOONN SSOOLLUUTTIIOONNSS

FFOORR PPRROOJJEECCTTOORRSS

- Colour balancing for dual projection. 100% DICOM 14 calibration

achievable. This takes into consideration the ambient light and other conditions in your presentation room

-

Easy-to-use software makes regular

DICOM 14 testing and recalibration simple.

-

Complete solution for your

radiological presentation; smooth PACS workstation integration

-

- Calibration of your medical monitors - Competent advice on DICOM from

our team. - Special projection surfaces for dual

projection. - Reproduction of digital x-ray images

at up to WUXGA 1920 x 1200 pixels.

- 19 -

Visualizer

Desktop Visualizer VZ-9plus³

The Visualizer VZ-9plus³ is the top of the line unit amongst WolfVision's portable Visualizers. It surpasses WolfVision's popular VZ-8 Visualizer series as well as any other Visualizer on the market in every way:

Unique features like the Synchronized Lasermarkers, a high resolution LCD monitor and many LAN/network features underline its leading position in the Visualizer market.

· even more useful and unique features · even easier to operate (easier positioning of

objects) · even better picture quality

Now in its third generation the VZ-9plus³ comes with a completely redesigned housing - new, modern and elegant.

· Large zoom range

· Outstanding mechanical Stability and long lifetime

· Easy positioning

· Synchronized laser markers

· Easy to use zoom wheel, continuous autofocus

· Flexible viewing area/ turntable

· Recording from any angle

- 20 -

Visualizer

Ceiling Visualizers VZ-C12³ / VZ-C32³

At the ISE 2009 in Amsterdam WolfVision introduced the Third Edition of the Ceiling Visualizers VZ-C123 and VZ-C323.

The product launch was a great success and our customers and dealers were very enthusiastic about the new Visualizers.

Both units clearly show WolfVision's attitude towards perfection. Many important details have been further improved and some innovative new features have been added.

The difference between the two new units is the built-in camera:

VZ-C123 = 1-CCD (1280 x 960 pixel, 30 fps) VZ-C323 = 3-CCD (3 x 1280 x 960 pixel, 30 fps)

· Designed like a projector – A vizualiser on the ceiling

· Easy positioning (with synchronized lightfield)

· Extremely high resolution / Advanced keystone correction

· 100% reflection free

· Extremely high depth of focus (Depth of Field)

· Shadow free illumination

· Illumination of hollow objects / No Light Adjustments

- 21 -

Visualizer

Lightboxes LB-38 and LB-9 (for Visualizers and Cameras)

WolfVision Lightboxes LB-9 and LB-38 are specially designed for dark transparent material like x-rays, color separatings or oversized slides, to be picked up in perfect quality with WolfVision Visualizers or other (document-) cameras. They guarantee a maximum on gray scale and true colors.

Please note that in general a lightbox is NOT necessary for transparencies, since they can be picked up in perfect quality on the crystalline white working surface of all WolfVision Visualizers. However, there are some rare situations where a lightbox is also useful for transparencies: When the room light causes reflections, if transparencies are very wavy or extremely dark.

Which WolfVision units need a lightbox?

Portable WolfVision Visualizers can pick up transparencies and slides. An external lightbox is only required for x-rays. (Plus slides an the Visualizers VZ-5F and VZ-8light, because these two units do not have a slide pick-up feature). Professional WolfVision Visualizers can pick up transparencies, slides and x-rays, as they have a built-in lightbox. The x-large lightbox LB-38 could be useful for extremely large x-rays.

- 22 -

Visualizer

Lightboxes LB-38 and LB-9 (for Visualizers and Cameras)

WolfVision Ceiling Visualizers can pick up transparencies on the supplied working plate. An external lightbox is only required for x-rays and slides.

EYE series cameras can use a light box for xrays, transparencies and slides

The LB-38 is WolfVision's LARGE lightbox. The extremely slim design looks very good on a table and is the perfect accessory for a WolfVision Ceiling Visualizer.

The LB-9 is designed for WolfVision's portable Visualizers. It fits perfectly on the working surface and has an attractive and professional appearance due to its very slim design

LB-38 LB-9

Size of lit area (length x width)

430 x 359 mm (16.9" x 14.1") 300 x 210 mm (11.8" x 8.3")

Size on outside (length x width)

503 x 419 mm (19.8" x 16.5") 370 x 260 mm (14.6" x 10.2")

Height 14 mm (0.6") 14 mm (0.6")

Light source CCFL, very even light CCFL, very even light

Guaranteed lamp lifetime

6.000 hours 6.000 hours

Color temperature 3200 K (optimized for use with Visualizers and other cameras)

3200 K (optimized for use with Visualizers and other cameras)

Power supply 12V output of Visualizers or

supplied power pack with 12 V output (multirange 90-240V)

12V output of Visualizers or external power pack with 12V output (multirange 90-240V)

Weight 2.7 kg (5.6 lbs) 1.2 kg (2.5 lbs)

- 23 -

Matrox Graphics Board

Xenia Series

Enjoy the view.

Matrox Xenia™ Series display controller boards are designed for use in computed radiography (CR), digital radiography (DR), and PACS workstations and support a wide range of display formats, resolutions and configurations. The native PCIe x16 single slot boards feature up to 1 GB of on-board RAM for fast image loading capacity and manipulation and each board can drive up to three high resolution digital displays, minimizing time required to install, configure and deploy imaging workstations. Each digital display output from Xenia and Xenia Pro supports the features listed below, including 8-, 10- and 13-bit independent GAMMA LUTs for precise DICOM calibration of grayscale and color displays, providing more accurate image display for viewing and diagnoses.

Xenia Xenia Pro

High Speed Frame Buffer 512 MB 1024 MB

Resolution Navigation

Console

Up to 3MP

(landscape or portrait)

Up to 4MP (landscape or portrait)

Resolution Imaging

Display 1

Up to 3MP



Resolution Imaging

Display 2

Up to 3MP



GAMMA LUTs (per output) 8/10/13-bits 8/10/13-bits

Hardware LUTs (per output) 8/10-bits 8/10-bits

Hardware Window IDs (HWIDs)

2

5 per display

output connector

9 per display output connector

- 24 -

Matrox Graphics Board

Xenia Series

· PCIe x16 single-slot board with triple high resolution digital-display output

· DICOM compliant 8/10/13-bit LUT GAMMA ramp correction supported on

all outputs in independent and/or stretched (NT-style) desktop modes for

accurate display calibration

· Digital Luminance Correction™ (DLC™)1–enables calibration packages to

uniformly calibrate display luminance to well-within industry standards.

· Dynamic Field-of-View Correction (DFC)1–with appropriate 3rd party

applications, DFC reduces color and/or grayscale inaccuracies caused by

different viewing angles of LCDs.

· Image Color Profiling (ICP)1–allows 3rd party developers to use hardware-

enabled ICP with up to 13-bits for accurate color rendering of subtle

anatomical image structures.

· Programmable Gamma LUTs supporting 8, 10 and 13-bit wide formats–for

the highest calibration, meeting or exceeding DICOM industry standards

across the entire display.

· Hardware Window IDs and LUTs–with multiple screen regions available,

application can exploit hardware-accelerated window and level functionality

on a specified region.

· Hardware pivot and cursor support as well as optimized bus performance

and increased memory provide fast and smooth user experience for window

& level and cineloops.

· Enhanced features available through Matrox imaging Library (MIL) to

enable hardware-accelerated operations such as image cached

window/levelling, zoom, and the ability to view 1024 simultaneous shades

of gray from 16-bit source images.

- 25 -

Warranty upgrade programme

For new VIDAR digitizers

Standard Warranty Basic Plus Warranty Premium Warranty

2 years for new units return shipping costs to customer labour and replacement parts

repair time: max. 7 working days loan unit for the duration of repair time if repair lasts longer than 7 days replacement parts (except consumable parts) shipping costs

repair time: max. 2 working days loan unit for the duration of repair time if repair lasts longer than 2 working days replacement parts and/or replacement of entire unit shipping costs

Scanner-Model Service package

2 yearwarranty

3 year warranty

4 year warranty

5 year warranty

6 year warranty

VIDAR Standard incl. 1.495,-- € 1.895,-- € 2.990,-- € 4.450,--€ Sierra Adv. Basic Plus 795,-- € 1.795,-- € 2.295,-- € -- -- Premium 995,-- € 1.995,-- € 2.595,-- € -- -- VIDAR Standard incl. 1.595,-- € 2.195,-- € 3.295,-- € 3.995,-- € DiagnosticPro Adv. Basic Plus 995,-- € 1.995,-- € 2.595,-- € 3.995,-- € 5.295,-- € Dosimetry Adv. Premium 1.195,-- € 2.195,-- € 2.895,-- € VIDAR CAD Standard incl. 2.295,-- € 3.095,-- € 4.995,-- € 6.495,-- € Pro Adv. Basic Plus 1.695,-- € 2.695,-- € 3.495,-- € -- -- Premium 1.995,-- € 2.995,-- € 3.995,-- € -- --

Please fill out form and send back by fax Fax: +49 (421) 430 66-26

Customer details:

Scanner model:

Company: Type:

Department: Serial-No.:

Contact person:

Address: Date of purchase

Tel.-No.: Contract starting date

Fax.-No.:

E-mail: Order

- 26 -

Maintenance contracts

For VIDAR digitizer

To ensure you can still keep a clear financial overview of your operating costs for your Vidar X-ray scanners even after the regular guarantee period has elapsed, we are pleased to offer you the following service: Maintenance contracts for Vidar X-ray scanners This service agreement covers all costs for replacement parts (excluding consumable spare parts like lamps etc. ), repair costs, free delivery service including transport insurance to your premises and the costs of the special transport box. Repairs are completed within 15 working days after receiving the scanners in our facility at the most. Should the repair take longer for any reason, you will be provided with a loan unit free of charge. Using your personal log-in to our Internet Service Portal (www.pacs-service.com ) allows you to access the FAQ and Forum areas and register repairs with your units directly. The yearly charge for each unit is just € 1.788.00 for units from the Sierra models and € 1.992.00 for Diagnostic models. In addition, you can also complement the basic agreement by selecting from the optional services below in accordance with your personal requirements

□ Reduced processing time: 7 days

Should the repairs take longer than 7 working days we will provide you with a loan unit free of charge. You will not be required to pay any transport or packaging costs. This option costs € 250.00 p.a.

□ Maximum repair time: 48 hrs

Should the repairs take longer than 48 hours we will provide you with a loan unit free of charge. You will not be required to pay any transport or packaging costs. This option costs € 595.00 p.a.

□ Replacement unit for the entire repair period

A replacement unit will be provided irrespective of the duration of the repairs. You will not be required to pay any transport or packaging costs. This option costs € 795.00 p.a.

□ Wearing parts (consumables)

Includes all wearing parts, e.g., film sprockets and illumination lamps etc. This option cost € 495.00 p.a.

- 27 -

- 28 -

Casestudies

Radiological clinic at the Bremen Mitte Klinik

The “Bremen-Mitte Clinic” for Radiological Diagnostics and Nuclear Medicine decided on the Larivière DICOM projection solution for digital presentation systems many months ago. By fitting out the radiological conference and training room of the Bremen clinic, led by Prof. Dr. Burckhard Terwey, assessments and image analyses can be carried out even more efficiently. In the next stage, the clinic has now tested an expansion of the presentation room concept with an X-Ray film scanner including the ClinicalExpress software made by American company VIDAR, meaning X-ray images used for current presentations can be quickly archived into a PACS by scanning in just a few work stages.

Current situation The radiological conference and training room of the Bremen-Mitte MR Centre is used every day for demonstrations and comparative studies of X-ray images and, for analysing illness progressions, meaning diagnostic pathways are drastically reduced and synergy effects in the areas of further training, Quality assurance and future development of image-producing

diagnosis processes utilised for the benefit of the patients and hospital operator. The professional Lavière DICOM projection solution “AcuScreen”, based on the Canon projectors, are available in the conference room.

This includes a Crestron media and room control system which allows the doctor to dedicate himself/herself completely to the presentation. This technology controls and visualises the operating states of the entire system on the central, interactive control panel.

The digitalisation of X-ray images for current presentations, and the further handling of the generated files have now also been tested at the clinic (Prof. Terwey) using a VIDAR X-ray image scanner and the associated VIDAR ClinicalExpress software.

To meet such needs, VIDAR offers a full product range of high definition HD-CCD film scanners, varying in price and technicality, to record X-ray, CT or MRT films with an optical film thickness of up to 4.0 OD. This also includes special scanners for mammograms.

- 29 -

Casestudies

Radiological clinic at the Bremen Mitte Klinik

The ClinicalExpress software used is a Windows-based programme for digitalising films and image transfers - e.g. DICOM image files to a DICOM printer or into a PACS. The programme includes modes for general radiography and mammography and can be purchased in various models: only for general radiography, only for mammography or with both modes. ClinicalExpress displays the images one after another and allocates them to a patient and study. The programme contains control elements to assess images and modify features. Mammogram images digitalised using ClinicalExpress should only be used for reference and test purposes, not for first diagnosis. General X-ray images digitalised with ClinicalExpress can also be used for the first diagnosis.

For more information, and answers to a customised solution, contact the company directly. Telephone : +49 (421) 43066-0, E-Mail: [email protected] , Internet: www.xray-digital.de .

About the company VIDAR Systems Corporation: The American company VIDAR Systems Corporation based in North Virginia has been a leader in the area of optical imaging technologies and the world’s number 1 manufacturer of X-ray image scanners for around a quarter of a century. For more information and background reports on the scanners and ClinicalExpress software, visit www.vidar.com About the company Larivière Gesellschaft für digitale Präsentations-systeme mbH: The Bremen company Larivière specialises in complete equipment of conference rooms in radiological clinics, but also fits out all other types of conference rooms with professional and state -of-the-art presentation technology and high-quality room controls. It also plans the construction of new rooms and installs the technology offered.

- 30 -

Whitepaper

Realizing the Benefits of Full-Field Digital Mammography

- 31 -

Whitepaper

Realizing the benefits of Full-Field Digital Mammography

- 32 -

Whitepaper


- 33 -

Whitepaper


- 34 -

Whitepaper


- 35 -

Whitepaper


- 36 -

Whitepaper


- 37 -

Whitepaper


- 38 -

- 39 -

Technical service

Our service department

Warranty repairs for manufacturers

Repairs after warranty has expired

Quality control

Medifications and inventions

Contracts for customers

Pick-up and delivery service

Free of charge hotline

Depot service

Individual customer statistics

Calibration service

- 40 -

Technical service


- 41 -

Technical service


- 42 -

Technical service

Service call workflowchart

- 43 -

Technical service

Shipping instructions for VIDAR digitizerers

Dear Vidar Customer, unfortunately, we are all too often presented with problems or damage when carrying out repairs on equipment which can be traced back to unsuitable packaging during shipment. For this reason, we would like to provide you with the following tips and information on how to ensure that your device reaches us in the best possible condition and thereby avoid any delay in our handling of the procedure. The digitizers in question are sensitive precision devices, which do not easily withstand severe blows or impacts. Damages, such as buckled or dented housing components can, in certain circumstances, lead to the device no longer being reparable. We accept no liability for damages occurring during shipment that can be traced back to unsuitable packaging! To avoid any damage occur during shipment, we recommend emphatically that you send the device in its original packaging. Please store this packaging carefully and enclose the device therein for transportation.

Should you, for any reason, no longer have the original packaging at your disposal, we can offer you the following (prices subject to change): packaging Sierra with PE foam: 129,00 Euro net per box. packaging DiagnosticPRO Advantage with PE foam: 129,00 Euro net per box. packaging DiagnosticPRO with PE foam: 145,00 Euro net per box. Should you not have the facility to store the packaging, please return it to us “carriage paid”. You will then receive a credit note from us to the sum of: 49.00€ net per box.

NONE of the following accessories should be sent with the device: power cable, SCSI card, SCSI cable, SCSI terminators, manuals, software… Please retain these yourself. Please send only the following components in with the device to be repaired. Units with the serial no. 100 000 to 109 999 DiagnosticPRO, DosimetryPRO, CAD PRO, VXR-16: - The digitizer itself - Film feeder - Important: short description of the problem!

- 44 -

Technical service

Shipping instructions for VIDAR digitizerers

Units with the serial no. 140 000 to 169 999 SIERRA (S/N 140 000 to 140 799), Sierra plus (S/N 140 800 to 169 999): - The digitizer itself - Multi sheet film feeder (from serial no. 140 800 when equipped accordingly) - The film entrance guide/ film dumper (If the black roller is defect or has become adhesive and needs to be replaced) - Important: short description of the problem! - NO Pedestal - NO Film exit tray - NO Power supply (Except: if malfunctioning (control light not illuminated)) Units with the serial no. 300 000 to 359 999: DiagnosticPRO Advantage, DosimetryPRO Advantage, CAD PRO Advantage - The digitizer itself - Film feeder - Important: short description of the problem. - NO Pedestal - NO Film collection container Please send the digitizer "carriage paid" to: Larivière Gesellschaft für digitale Präsentationssysteme mbH PACS Servicecenter Teerhof 48 28199 BREMEN GERMANY

- 45 -

- 46 -

Company information

Company profile

Since 1996, Larivière Gesellschaft für digitale Präsentationssysteme has been focusing its efforts on finding visualisation solutions in the IT and A/V fields. The MDI (Medical Digital Imaging) division is engaged in the digitalization of X-rays using high-quality scanning technology and the presentation of radiological data via projectors conforming to the DICOM 14 standard. Today, Larivière systems can be found in the X-ray departments of almost all large clinics and our service department takes care of the maintenance and repair of installed units across Europe.

Larivière Gesellschaft für digitale Präsentationssysteme mbH Teerhof 48 28199 Bremen Germany Tel: +49 (421) 43066-0 Fax: +49 (421) 43066-26 eMail: mail@ lariviere.de www.lariviere.de

- 47 -

Company information

Contact persons

- 48 -

Company information

International telefon numbers

For technical support over the telephone please call:

0800 – 223 26 37

Germany +49 (421) 430 66 23

Greece +30 (69) 73 88 85 69

Italy +39 (34) 70 69 41 87

Polska +48 (22) 510 24 51

United Kingdom +44 (121) 663 07 70

Spain +34 (617) 55 32 80

Turkey +90 (212) 635 79 70

Bahrain, Qatar +973 (1) 727 61 76

Egypt +20 (1) 29 00 99 01

Lebanon +961 (1) 61 39 99

Switzerland +41 (32) 512 65 54

Netherlands +31 (20) 891 03 34

Spain +34 (93) 181 63 14

Catálogo de productos Larivière 2012

Documents

Transcript of Catálogo de productos Larivière 2012