CATALOG - ROCKET RACK® · ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524...

TM

CATALOG

903.680.4222 [email protected]

ROCKET RACK® Sanitary Support System For Electrical & Mechanical Installations

www.rocket-rack.com903.680.4222 [email protected]

Don't see the size you need? Call 903.680.4222.

ROCKET RACK® TENTEDTM

U.S. Patent #D653,524 S

ROCKET RACK® Tented™ is fabricated with the slot and mounting holes cut on the heel of the angle and hung trapeze style from ceiling of structure using ROCKET ROD™. ROCKET RACK® Tented™ is used to support process pipe & electrical conduit or cable tray. Hygienic design features sloped sides (45°) to eliminate a horizontal ledge where dirt and bacteria can accumulate. Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run, creating a beautiful installation, even suitable for high-end residential or commercial buildings. Pipe & conduit are secured with U-Bolts or ROCKET STANDOFFS™ & approved sanitary clamps. Made from 2x2x1/4 Angle, ROCKET RACK® Tented™ is pre-engineered to withstand heavy loads. Radius corners for added safety.

Length (in inches) refers to overall length of the rack, NOT to the length of the slot. We can fabricate racks almost any length and width. Just let us know the center to center distance between mounting holes. Call for pricing and lead time on lengths not listed here or racks made from 316 Stainless.

FACTORY STOCK AVAILABLE FOR TENTEDTM RACKS LISTED BELOW

ROCKET RACK® Tented™ is supplied with specially-designed

stainless mounting hardware – 3/8" or 1/2" – leaving no gaps or

spaces between the rack and mounting rod.

PART NUMBER DESCRIPTION

RRTNT304123/8 RRTNT304121/2 RRTNTALU123/8 RRTNTALU121/2 12" ROCKET RACK® TentedTM | 2x2x1/4






3/8" HDW304 STAINLESS 6061-T6 ALUM.

3/8" HDW1/2" HDW 1/2" HDW

1

SPECIALTY MOUNTING HARDWARE INCLUDED

A

B

www.rocket-rack.com Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.

ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.


Specially-designed stainless mounting hardware supplied with tented angle, one set per mounting hole. Please specify rod size – 3/8" or 1/2"

ROCKET RACK® TENTEDTM ASSEMBLY DETAILSU.S. PATENT NO. D653,524 S

DIMENSIONS

A: 1 7/8" when using 1/2" rod or 3/8" rod

B: 7/8" when using 1/2" rod or 3/8" rod

Simply cut your ROCKET ROD® one inch longer than where you want to place the bottom of your pipe. Then skin off Dimension A and you are ready to install!


2

ROCKET RACK Tented is ideally suited for use with rigid conduit—Stainless, aluminum or galvanized steel–anchored with ROCKET RACK Stainless U-Bolts. Please note that when using thin-walled tubing or coated conduit we recommend standing off the rack with ROCKET Standoff™ and a sanitary clamp (each sold separately—See ROCKET RACK Stainless Hardware). ROCKET RACK Tented supplied with specially-designed mounting hardware. All other items sold separately.

NSF InternationalFounded in 1944, NSF International is an independent, accredited organization, that tests, audits and certifies products and systems.

NSF CertificationRecognized by regulatory agencies at the local, state, federal and international level, NSF certification demonstrates that a product complies with all standard requirements. NSF conducts periodic facility audits and product testing to verify that the product continues to comply with the standard.

The NSF mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today. It is valued by consumers, manufacturers, retailers and regulatory agencies worldwide.

The NSF certification mark on a product means that the product complies with all standard requirements. NSF conducts periodic unannounced inspections and product testing to verify that the product continues to comply with the standard.

The mark provides:* Knowledge that an impartial review against established criteria or guidelines has been conducted* Evidence that product labeling and claims have been objectively reviewed by a trusted third party* Backing by a team of professionals dedicated to public health and safety operating in more than 170 countries around the world

Robroy Industries Rocket Rack Products have been tested & certified under the Food Safety and Quality Product/System Category to standard NSF/ANSI/3-A 14149-1 -2014.

About NSF

Manufacturing the patented ROCKET RACK® without the permission of Robroy Industries, (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law.


ROCKET RACK® STANDARDU.S. Patent #’s D608,183 S & D599,194 S

ROCKET RACK® Standard is fabricated with the slot and mounting holes cut into the leg of the angle and hung trapeze style from ceiling of structure using ROCKET ROD™. Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run, creating a beautiful installation, even suitable for high-end residential or commercial buildings. Pipe & conduit are secured with ROCKET RACK U-Bolts or ROCKET STANDOFFS™ & approved sanitary clamps. Made from 2x2x1/4 Angle, ROCKET RACK® Standard is engineered to withstand heavy loads. Radius corners for added safety.


FACTORY STOCKAVAILABLE FOR STANDARD

RACKS LISTED BELOW

ROCKET RACK® Standard can be installed using a Serrated

Flange Nut, a Nyloc Flange Nut and ROCKET ROD™, ALL SOLD

SEPARATELY

PART NUMBERDESCRIPTION

RRSTD30412 RRSTDALU12 12" ROCKET RACK® Standard | 2x2x1/4






6061-T6ALUMINUM

304 STAINLESS


Don't see the size you need? Call 903.680.4222.3



ROCKET RACK® STANDARD



ROCKET RACK® FLAT

PART NUMBERDESCRIPTION

RRFR0412 RRFRALU12 12" ROCKET RACK® Flat | 2x1/4






6061-T6ALUMINUM

304 STAINLESS

FACTORY STOCKAVAILABLE FOR FLAT RACKS

LISTED BELOW

ROCKET RACK® Flat can be installed using a Serrated Flange

Nut, a Nyloc Flange Nut and ROCKET ROD™, ALL SOLD

SEPARATELY

U.S. Patent #D649,863 S

ROCKET RACK® Flat is used for vertical or horizontal pipe runs along the wall. It is mounted off the wall several inches using ROCKET ROD™ for easy access during cleaning. ROCKET RACK® Flat can also be used with the ROCKET RACK® Post Mount System. Patented slot design allows for additional lines to be added at a future time and assures a perfectly straight run, creating a beautiful installation, suitable even for high-end residential or commercial buildings. Pipe & conduit are secured with ROCKET RACK U-Bolts or ROCKET STANDOFFS™ & approved sanitary clamps. Made from 2x1/4 Flat Stock with radius corners for added safety.

ROCKET RACK® Flat IS FOR WALL AND POST MOUNT INSTALLATIONS ONLY. NEVER HANG FLAT STOCK TRAPEZE STYLE.


ROCKET RODTM

by ROCKET RACK®

ROCKET ROD™ – 304S or Zinc-plated all-thread rod with FDA-CertifiedPVC encasement – is available in ¼" – ¾" diameters and 6’ & 12’ lengths. A proprietary manufacturing process ensures the encasement is tight and snug making it clean and smooth with no exposed threads – perfect for food and beverage-grade installations.

The installer simply cuts the rod to length, uses a utility knife to strip away the amount of FDA-Certified encasement to reveal precisely the threads needed, then mounts the rack. No on-site threading of rod saves time and substantial-ly reduces the danger of product contamination, while increasing on-the-job safety.

PART NUMBER


DESCRIPTION

ROCKET RODTM | 1/4"- 20x6' PVC Encasement ATR

ROCKET RODTM | 1/2"- 13x6' PVC Encasement ATR | FDA cert. PVC






RRPVC304061/4

RRPVC304061/2

RRPVC304123/8

RRPVC304063/8

RRPVC304063/4

RRPVC304065/8

RRPVC304121/2

304 STAINLESS

RRPVCZNC061/4

RRPVCZNC061/2

RRPVCZNC123/8

RRPVCZNC063/8

RRPVCZNC063/4

RRPVCZNC065/8

RRPVCZNC121/2

Zinc-Plated

FACTORY STOCKAVAILABLE FOR ROCKET RODTM

LISTED BELOW

6 ft.

12 ft.










PART NUMBER


PART NUMBER

DESCRIPTION

DESCRIPTION

RRHDWSUBS1/2

RRHDWSSERFLN3/8

RRHDWSRODCUP3/8

RRHDWSBEVNUT3/8

1/2" U-Bolt, 3/8" - 16, for 1/2" Rigid Pipe/Conduit

3/8"- 16 Serrated Flange Nut

3/8"- 16 Rod Coupler 11/16" Heavy Hex x 1_1/8" Long

3/8" Beveled Nyloc Nut, can be used with U-Bolts on ROCKET RACK® Tented™

RRHDWSUBS1 1" U-Bolt, 3/8" - 16, for 1" Rigid Pipe/Conduit

RRHDWSUBS2

RRHDWSUBS4

2" U-Bolt, 3/8" - 16, for 2" Rigid Pipe/Conduit


RRHDWSUBS3/4

RRHDWSSERFLN1/2

RRHDWSRODCUP1/2

3/4" U-Bolt, 3/8" - 16, for 3/4" Rigid Pipe/Conduit

1/2"- 13 Serrated Flange Nut

1/2"- 13 Rod Coupler 11/16" Heavy Hex x 1_3/4" Long

RRHDWSUBS1-1/2

RRHDWSUBS3-1/2

1_1/2" U-Bolt, 3/8" - 16, for 1_1/2" Rigid Pipe/Conduit


RRHDWSUBS1-1/4

RRHDWSUBS3



RRHDWSUBS2-1/2

RRHDWSUBNUT3/8


3/8" Nyloc Flange Nut, for use with U-Boltsalso available for separate purchase

Drawing Number:

Drawing Title:

A A

B B

2

2

1

1

Date:Material:

ROCKET RACK® 866-481-8899

Unique Metal Solutions, LLCPO Box 133

Gray Summit, MO 63039rocket-rack.com

Aprvd by:Drawn by:

OLD WAY

MM MM/RM 3-2018

SMPL.031318

304 SS

Drawing Number:

Drawing Title:

A A

B B

2

2

1

1

Date:Material:




Aprvd by:Drawn by:

OLD WAY

MM MM/RM 3-2018

SMPL.031318

304 SS

Drawing Number:

Drawing Title:

A A

B B

2

2

1

1

Date:Material:




Aprvd by:Drawn by:

OLD WAY

MM MM/RM 3-2018

SMPL.031318

304 SS

Drawing Number:

Drawing Title:

A A

B B

2

2

1

1

Date:Material:




Aprvd by:Drawn by:

OLD WAY

MM MM/RM 3-2018

SMPL.031318

304 SS

ROCKET RACK® STAINLESS U-BOLTS & HARDWARE

All ROCKET RACK® Hardware is made from 304 Stainless. ROCKET RACK® U-Bolts are custom manufactured to fit ROCKET RACK® products with the least amount of exposed threads, virtually eliminating pathogen harborage points. All U-Bolts are supplied with one pair of Stainless Nyloc Flange nuts. If ordering U-Bolts for Stainless or Copper Tube, please provide Tube O.D.

Nyloc Flange Nuts Included

ROCKET POSTSTM

& POST-TENTED

TM

RACK

ROCKET Posts can be used to run conduit and process pipe vertically or horizontally using our ROCKET RACK Flat or Post-Tented Racks.

ROCKET Posts, made from 2” Sch. 40 304S pipe are sold individually. ROCKET Posts have a weld-sealed cap and mounting plate, (2” Sch 40 304S Butt Welded Cap and 4x6x1/4 304S Mounting Plate with four 9/16” Mounting Holes). Post-Tented Racks are fabricated with the slot in the peak of the angle, but with no mounting holes. These racks are welded to a 2x4x3/8 plate with holes perfectly spaced for use with a 2" ROCKET RACK U-Bolt (sold separately) and milled with a radius that fits the curvature of the post.

B.1


DESCRIPTIONPART NUMBER

RRPOSTM30448

RRTNT304MOD12

48" ROCKET Post, 2" Sch. 40 Pipe

12" Post-Tented Rack for ROCKET Post, 2x2x1/4

RRPOSTM30472

RRTNT304MOD24



RRPOSTM30496

RRNTT304MOD48



RRPOSTM30460

RRTNT304MOD18



RRPOSTM30484

RRTNT304MOD36



RRPOSTM30478

RRTNT304MOD30

RRPOSTM304120




RRPOSTM304108 108" ROCKET Post, 2" Sch. 40 Pipe

A.1

Figure A.1 shows ROCKET RACK Flat affixed to two ROCKET Posts using ROCKET RACK U-Bolts creating a vertical mounting system. This system is a quick and versatile way to attach disconnects, operator interface panels or mechanical devices, such as water-flow meters and valves. This same system can be used to run conduit or cable tray vertically.

Figure B.1 shows Post-Tented Rack affixed to two ROCKET Posts using ROCKET RACK U-Bolts. This system is used in instances requiring horizontal pipe runs along equipment where other mounting means are unavailable or unfeasible. It provides a quick and sanitary installation that allows for fine adjustments. The installer can add pipe runs without drilling or welding in the field.





Post-Tented™ Rack

Figure A.2 shows two ROCKET Posts that are spanned by ROCKET RACK® Flat. In this example the system is supporting a disconnect, and the conduit runs vertically.

Figure B.2 shows four ROCKET Posts, each pair spanned by Post-Tented Racks supporting conduit and cable tray horizontally independent of an attachment point, such as a wall.

A.2 B.2

ROCKET Post, ROCKET RACK® Flat, Post-Tented Racks and U-Bolts all sold separately. Call for pricingand lead times for ROCKET Post System.




8




9

ROCKET RACK® CUSTOMIZABLE ROCKET POSTSTM

ROCKET Posts are useful when no other means of fastening conduit or process pipe is available. This system allows the installer to bring conduit, basket tray or process piping down to the next to equipment, process lines or conveyors. It provides a secure and sanitary way to feed devices and equipment and gives a very clean and sleek-looking installation that is completely adjustable. ROCKET Post System can be tailored to suit your needs, as posts and racks are customizable in height and length.

SINGLE ROCKET POST WITH SANITARY CLAMP: A single conduit is attached to a single ROCKET Post by means of Sanitary Clamps.

ROCKET POSTS WITH POST-TENTED CANTILEVER:Similar to Post-Tented Racks – no mounting holes, slots only – but only one end is fitted with a welded plate. Here two Post-Tented Cantilever Racks are mounted to two ROCKET Posts by means of ROCKET RACK U-Bolts.

ROCKET POSTS WITH ROCKET RACK® FLAT, WELDED: A multiple conduit run is supported by ROCKET RACK Flat. The Flat racks are secured to the Posts by means of a ROCKET Spacer™, with a clean, tight, sanitary weld. Distance of ROCKET RACK Flat from Post is customizable by changing the length of ROCKET Spacer.

ROCKET RACK® STANDARD POSTS: Similar to the ROCKET Post System, but based on our Standard rack design. Our Standard Posts provide a more economical way to run conduit & process pipe along conveyors and equipment. Basket tray is attached to Standard Posts with Niedax Clamps (see Sanitary Clamp page).




10

ROCKET PLATETM

for INSULATED METAL PANEL WALLS (IMP)and other wall mounting applications

IMP Walls provide a sanitary finish that can be easily washed down and withstand harsh chemical cleaning. Many food manufacturers are using IMP walls in the construction of their facilities. The inset above shows an IMP wall cutaway and how the ROCKET Plate is anchored using a FAB-LOK® Fastener, which provides a secure fit and high resistance to vibration loosening. ROCKET Plate is a stainless steel plate, 4" x 2" x ¼" with 3/8" mounting holes – center hole threaded to accept rod.

MULTIPLE CONDUIT/PROCESS PIPE RUN: When installing multiple conduit or process pipe runs along an IMP wall, the installer uses ROCKET RACK U-Bolts to attach the run to ROCKET RACK Flat racks (parts listed on facing page). ROCKET RACK Flat stands off the wall with a ROCKET Plate and Bald/Slick Rod.

SINGLE CONDUIT/PROCESS PIPE RUN: When mounting a single conduit or process pipe to the IMP wall, the installer has several options (shown on facing page). The ROCKET Plate can be used with 1) ROCKET ROD®, 2) Bald Rod or 3) ROCKET SpacerTM. These options are customizable according to required distance from the IMP wall. All are pre-assembled & supplied with flange nuts. FAB-LOK® Fastener and Sanitary Clamps sold separately.




11

ROCKET PLATETM

AND ROCKET PLATE ASSEMBLIES

ASSEMBLY 1: A short piece of ROCKET ROD®, secured with Serrated Flange NutsCOMPONENTS: ROCKET Plate, ROCKET ROD and Two Serrated Flange NutsPART # RRRPLTRRODSET

ASSEMBLY 2: Bald rod threaded on both ends, secured with Serrated Flange NutsCOMPONENTS: ROCKET Plate, Bald Rod and Two Serrated Flange NutsPART # RRRPLTBRODSET

ASSEMBLY 3: All-Thread rod run through ROCKET SpacerTM COMPONENTS: ROCKET Plate, All-Thread Rod (no exposed threads), and ROCKET Spacer PART # RRRPLTSPCRSET

ALL ASSEMBLIES LISTED HERE: • Distance X from wall customizable• Call for Pricing & Lead Time• FAB-LOK® Fasteners and Sanitary Clamps Sold Separately

Dra

win

g N

umbe

r:

Dra

win

g Tit

le:

AA

BB

22

11

Dat

e:M

ater

ial:

ROCK

ET R

ACK®

86

6-48

1-88

99

Uniq

ue M

etal

Sol

utio

ns, L

LCPO

Box

133

Gra

y Su

mm

it, M

O 6

3039

rock

et-ra

ck.c

om

Apr

vd b

y:D

raw

n by

:

OLD

WAY

MM

MM

/RM

3-20

18

SMPL

.031

318

304

SS

X

Dra

win

g N

umbe

r:

Dra

win

g Tit

le:

AA

BB

22

11

Dat

e:M

ater

ial:

ROCK

ET R

ACK®

86

6-48

1-88

99

Uniq

ue M

etal

Sol

utio

ns, L

LCPO

Box

133

Gra

y Su

mm

it, M

O 6

3039

rock

et-ra

ck.c

om

Apr

vd b

y:D

raw

n by

:

OLD

WAY

MM

MM

/RM

3-20

18

SMPL

.031

318

304

SS

X

Dra

win

g N

umbe

r:

Dra

win

g Tit

le:

AA

BB

22

11

Dat

e:M

ater

ial:

ROCK

ET R

ACK®

86

6-48

1-88

99

Uniq

ue M

etal

Sol

utio

ns, L

LCPO

Box

133

Gra

y Su

mm

it, M

O 6

3039

rock

et-ra

ck.c

om

Apr

vd b

y:D

raw

n by

:

OLD

WAY

MM

MM

/RM

3-20

18

SMPL

.031

318

304

SS

X


RRRPLATE304 ROCKET PlateTM FOR IMP, 304S, 4" X 2" X ¼"

RRRPLTBRODSET ROCKET PlateTM BROD SET (ASSEMBLY 2)

RRRPLTRRODSET ROCKET PlateTM RROD SET (ASSEMBLY 1)

RRRPLTSPCRSET

RRRHDWSFAB230

ROCKET PlateTM SPCR SET (ASSEMBLY 3)

FAB-LOK FOR MOUNTING RPLT TO IMP WALL

ROCKET PLATE & ACCESSORIES




12




13

PART NUMBER

PART NUMBER

DESCRIPTION

DESCRIPTION

RRBCLMPIPE1

RRHDWSSNDOFF

RRHDWSTSNDOFF

RRHDWSHEXBOLT

RRHDWSNIEDSET

Behringer® Compact Threaded Anchor for 1" Pipe/Conduit

ROCKET StandoffTM

TALL ROCKET StandoffTM

ROCKET Bolt™

NIEDAX UNIVERSAL WIRE MESH MOUNTING BRACKET SET

RRBCLMPVC75 Behringer® Compact Threaded Anchor for 3/4" PVC Coated Conduit

RRBCLMPIPE2 Behringer® Compact Threaded Anchor for 2" Pipe/Conduit

FOR SANITARY CLAMP ON TOP OF TNT RACK1"D x 1"L

FOR SANITARY CLAMP ON TOP OF TNT RACK1"D x 2"L

FOR SANITARY CLAMP ON UNDERSIDE OF TNT RACKBEVELED CUSTOM BOLT, 3/8"-16 x 11/16"Hex X 2_1/8"L

FOR USE WITH CABLE TRAYINCLUDES: NIEDAX CLAMP, ¼"-20 BUTTON FLANGE HEAD SCREW AND ¼"-20 NYLOCK FLANGE NUT

RRBCLMPVC1

RRBCLMPVC125

Behringer® Compact Threaded Anchor for 1" PVC Coated Conduit

Behringer® Compact Threaded Anchor for 1_1/4" PVC Coated Conduit

STAINLESS SANITARY PIPE CLAMPS & ACCESSORIES

ROCKET Bolt™: Used on the underside of ROCKET RACK Tented, securing the ROCKET Standoff. Beveled shoulders of bolt fit snugly into the peak of the angle, leaving no gaps or spaces where dirt or bacteria could collect.

BEHRINGER, 304SRRHDWSSNDOFF

NIEDAX BRACKETS

RRHDWSHEXBOLT

ROCKET StandoffTM: Used for installing Sanitary Clamps on ROCKET RACK Tented™ racks. Specially designed to fit the sloping sides of ROCKET RACK Tented, leaving NO gaps or spaces where bacteria or dirt could collect.



ROCKET RINGS®: A Cable Management/Mounting System, available threaded or unthreaded, to secure cabling for devices and drives on conveyors, skids or equipment.

ROCKET SPACERTM: Used to mount equipment, conduit, process pipe or ROCKET RACK Flat away from the wall or other structure to maintain desired distance for easy cleaning. One-inch diameter, available in various lengths, threaded or unthreaded.

PART NUMBER

PART NUMBER

PART NUMBER

DESCRIPTION

DESCRIPTION

DESCRIPTION

RRHDWSRRING11/4

RRBROD304123/8

ROCKET RING® ¼"D x 1_1/4"L

304S BALD/SLICK ROD, 3/8"D x 12'L

RRHDWSRRING2

RRBROD304121/2

RRHDWSSPCR1

ROCKET RING® ¼”D x 2"L

304S BALD/SLICK ROD, 1/2"D x 12'L

1"D x 1"L ROCKET SpacerTM

ROCKET RACK® STAINLESS HARDWARE & ACCESSORIES




14Don't see the size you need? Call 903.680.4222.




15

The ROCKET RACK® slots are to be used for securing conduit and process pipe fasteners (U-Bolts, ROCKET STANDOFF™, Sanitary Clamps, etc.) only. The proprietary slot is NOT to be used as a means of installing the ROCKET RACK itself. The ROCKET RACK should be installed using only the mounting holes provided.

ROCKET RACK FLAT is for WALL MOUNT & POST MOUNT ONLY!

ROCKET RACK is a pre-engineered product. Do not attempt to cut or alter the ROCKET RACK product in any way. The load ratings provided in this document only apply to unaltered ROCKET RACK products. Robroy Industries, dba ROCKET RACK disclaims all potential liability that may result from improper installation of the ROCKET RACK product or from cutting the rack or changing the size of the slot or mounting holes. You agree to indemnify and hold Robroy Industries harmless from any loss, damage, claim, cost, or expense incurred or suffered by Robroy Industries relating to any ROCKET RACK product that you improperly installed or altered in any way.

Manufacturing the patented ROCKET RACK Conduit & Pipe Support Racks without the permission of Robroy Industries (by license or waiver) constitutes infringement and will expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. Robroy Industries respects intellectual property rights and expects to have its rights respected. Robroy Industries has invested considerable resources in protecting its intellectual property, and fully intends to vigorously protect these assets against any infringement or other unlawful actions.

ROCKET RACK U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

LOAD RATINGS

***ATTENTION***




16

LOAD RATINGSROCKET RACK® TENTEDTM

U.S. PATENT NO. D653,524 S

• These slots and mounting holes are centered on the heel of the angle.

• Loads on these tables are based on utilizing the outside mounting holes.

• Load ratings are based on an allowable stress equal to 60% of the material's Yield Stress, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.

LOAD RATINGS ARE LISTED FOR TWO MATERIALS HAVING THE FOLLOWING PROPERTIES:

Material

304/316 Stainless Steel

6061-T6 Aluminum

Yield Stress (KSI)

30

37

Mod of Elasticity (KSI)

28100

10000

6 SLOT TENTEDTM

1 SLOT TENTEDTM

OVERALL LENGTH

SLOT LENGTH SLOT LENGTH SLOT LENGTH SLOT LENGTH SLOT LENGTH SLOT LENGTH

0.394" 1"

2" 916 "

1"

2"

SLOT LENGTH

OVERALL LENGTH

916 "

1"

Drawing Number:

Drawing Title:

A A

B B

2

2

1

1

Date:Material:




Aprvd by:Patented: Drawn by:

ROCKET RACK® Tented™

D653,524S MM MM/RM 2-2018

TNT.

.394" wide slot

1"

2"

SLOT LENGTH

OVERALL LENGTH

916 "

1"

Drawing Number:

Drawing Title:

A A

B B

2

2

1

1

Date:Material:





ROCKET RACK® Tented™

D653,524S MM MM/RM 2-2018

TNT.

.394" wide slot

• These slots and mounting holes are centered on peak or heel of the angle.


• Load rating are based on ASD, 9th Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.

• For slot dimensions & placement, Call ROCKET RACK® 903.680.4222




17

SECTION PROPERTIES OF REDUCED SECTION FOR LOAD AND DEFLECTION RATING

Area Min. Section Mod. Moment of Inertia Radius of Gyration

(lbs.) (in.)(in.^4) (in.^3)

0.720 0.2990.0642 0.1074

PART NUMBEROverall

RRTNT30412 | RRTNT31612 12"

14"

16"

18"

20"

22"

24"

26"

28"

30"

32"

34"

36"

38"

40"

42"

44"

46"

48"

50"

52"

54"

56"

58"

60"

773

644

552

483

429

386

351

322

297

276

258

242

227

215

203

193

184

176

168

161

155

149

143

138

133

0.0089

0.0129

0.0175

0.0229

0.0289

0.0357

0.0432

0.0514

0.0604

0.0700

0.0804

0.0914

0.1032

0.1157

0.1290

0.1429

0.1575

0.1729

0.1890

0.2058

0.2233

0.2415

0.2604

0.2801

0.3004

773

644

552

483

429

386

351

322

297

276

258

242

227

215

203

193

184

176

168

157

144

133

124

115

107

773

644

552

483

429

386

351

322

297

276

258

235

208

186

166

150

136

124

114

104

96

89

82

77

71

1546

1288

1104

966

859

773

703

644

595

552

515

483

455

429

407

386

368

351

336

322

309

297

286

276

267

0.0112

0.0161

0.0219

0.0286

0.0362

0.0447

0.0540

0.0643

0.0755

0.0875

0.1005

0.1143

0.1290

0.1447

0.1612

0.1786

0.1969

0.2161

0.2362

0.2572

0.2791

0.3019

0.3255

0.3501

0.3755

RRTNT30428 | RRTNT31628
























Length

Max Point Deflection DeflectionMax. Dist.L/240 L/360 L/240 L/360

Load (LB) (IN) (IN)Load (LB)(LB) (LB) (LB) (LB)


TentedTM 304 & 316 Stainless 2x2x1/4

1546

1288

1104

966

859

773

703

644

595

552

515

483

455

429

400

361

327

298

273

250

231

213

198

184

172

1546

1288

1104

966

859

773

703

644

569

491

427

376

333

297

266

240

218

199

182

167

154

142

132

123

114










18



(lbs.) (in.)(in.^4) (in.^3)

0.720 0.2990.0642 0.1074

PART NUMBEROverall

RRTNTALU12 12"

14"

16"

18"

20"

22"

24"

26"

28"

30"

32"

34"

36"

38"

40"

42"

44"

46"

48"

50"

52"

54"

56"

58"

60"

0.0310

0.0446

0.0607

0.0792

0.1003

0.1238

0.1498

0.1783

0.2092

0.2427

0.2786

0.3169

0.3578

0.4011

0.4469

0.4952

0.5460

0.5992

0.6549

0.7131

0.7738

0.8369

0.9025

0.9706

1.0412

0.0387

0.0557

0.0758

0.0990

0.1253

0.1548

0.1872

0.2228

0.2615

0.3033

0.3482

0.3962

0.4472

0.5014

0.5587

0.6190

0.6825

0.7490

0.8186

0.8914

0.9672

1.0461

1.1281

1.2133

1.3015

RRTNTALU28

RRTNTALU20

RRTNTALU36

RRTNTALU46

RRTNTALU16

RRTNTALU32

RRTNTALU24

RRTNTALU40

RRTNTALU50

RRTNTALU56

RRTNTALU14

RRTNTALU30

RRTNTALU22

RRTNTALU38

RRTNTALU48

RRTNTALU54

RRTNTALU18

RRTNTALU34

RRTNTALU44

RRTNTALU26

RRTNTALU42

RRTNTALU52

RRTNTALU58

RRTNTALU60

Length




TentedTM 6061-T6 Aluminum 2x2x1/4

1907

1426

1048

802

634

513

424

356

304

262

228

201

178

158

142

128

116

106

97

89

82

76

70

65

61

1369

951

698

535

422

342

283

238

202

175

152

134

118

106

95

86

78

71

65

59

55

51

47

44

41

953

794

681

596

530

477

433

397

367

340

318

298

280

265

251

238

227

217

207

199

191

183

177

170

164

1907

1589

1362

1192

1059

953

867

794

733

681

636

596

561

530

502

477

454

433

414

397

381

367

353

340

329

953

794

655

501

396

321

265

223

190

164

143

125

111

99

89

80

73

66

61

56

51

47

44

41

38

856

594

437

334

264

214

177

149

127

109

95

84

74

66

59

53

49

44

40

37

34

32

29

27

25






19





ROCKET RACK® TENTEDTM ANGLEU.S. PATENT NO. D653,524 S

PART NUMBEROverall

RR3TNT30436 | RR3TNT31636









36"

38"

40"

42"

44"

46"

48"

50"

52"

54"

56"

58"

60"

62"

64"

66"

68"

70"

72"

681

643

610

579

552

526

504

483

463

445

429

414

399

386

374

362

351

341

331

0.0649

0.0727

0.0810

0.0898

0.0990

0.1086

0.1187

0.1293

0.1403

0.1517

0.1636

0.1760

0.1888

0.2020

0.2157

0.2298

0.2444

0.2595

0.2750

681

643

610

579

552

526

504

483

463

445

429

414

399

386

374

362

351

341

331

681

643

610

579

552

526

504

483

459

424

393

366

341

319

298

280

263

248

234

1363

1287

1219

1158

1103

1053

1007

965

927

891

858

827

799

772

747

724

702

681

662

0.0811

0.0909

0.1013

0.1122

0.1237

0.1358

0.1484

0.1616

0.1754

0.1897

0.2045

0.2200

0.2360

0.2525

0.2696

0.2873

0.3055

0.3243

0.3437

1363

1287

1219

1158

1103

1053

1007

965

927

891

858

827

799

764

716

672

632

595

562

1363

1287

1219

1147

1040

948

867

796

734

679

629

585

545

510

477

448

421

397

374











Length



TENTEDTM ANGLE ROCKET RACK®



(lbs.) (in.)(in.^4) (in.^3)

1.220 0.5010.3061 0.3217

TentedTM 304 Stainless 3x3x1/4




20





ROCKET RACK® TENTEDTM ANGLEU.S. PATENT NO. D653,524 S



(lbs.) (in.)(in.^4) (in.^3)

1.220 0.5010.3061 0.3217

PART NUMBEROverall

RR3TNTALU36 36"

38"

40"

42"

44"

46"

48"

50"

52"

54"

56"

58"

60"

62"

64"

66"

68"

70"

72"

840

794

752

714

680

649

621

595

571

549

529

510

493

476

461

446

433

420

408

0.2248

0.2520

0.2808

0.3112

0.3431

0.3765

0.4115

0.4481

0.4862

0.5259

0.5671

0.6099

0.6542

0.7001

0.7476

0.7966

0.8471

0.8992

0.9529

530

472

424

383

347

316

289

266

245

226

210

195

182

170

159

149

141

132

125

353

315

283

255

231

211

193

177

163

151

140

130

121

113

106

100

94

88

83

1681

1587

1504

1428

1360

1299

1242

1190

1143

1099

1058

1020

985

952

922

893

866

840

816

RR3TNTALU52

RR3TNTALU44

RR3TNTALU60

RR3TNTALU70

RR3TNTALU40

RR3TNTALU56

RR3TNTALU48

RR3TNTALU64

RR3TNTALU38

RR3TNTALU54

RR3TNTALU46

RR3TNTALU62

RR3TNTALU72

RR3TNTALU42

RR3TNTALU58

RR3TNTALU68

RR3TNTALU50

RR3TNTALU66

Length



TENTEDTM ANGLE ROCKET RACK®

TentedTM 6061-T6 Aluminum 3x3x1/4

0.2810

0.3150

0.3510

0.3889

0.4288

0.4706

0.5144

0.5601

0.6077

0.6573

0.7089

0.7623

0.8178

0.8751

0.9344

0.9957

1.0589

1.1241

1.1912

847

756

678

612

555

506

463

425

392

362

336

312

291

272

255

239

225

212

200

565

504

452

408

370

337

309

283

261

241

224

208

194

181

170

159

150

141

133

OVERALL LENGTH

1" 9

16 "

SLOT LENGTH

2" .394"

Drawing Number:

Drawing Title:

A A

B B

2

2

1

1

Date:Material:





ROCKET RACK® Standard

D608,183S & D599,194S MM MM/RM 2-2018

STD.

SLOT LENGTH SLOT LENGTH SLOT LENGTH

ROCKET RACK® STANDARDU.S. PATENT NOS. D608,183 S & D599,194 S

• These slots and mounting holes are centered on horizontal flat leg of the angle.


• Load ratings are based on ASD, 9TH Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.

LOAD RATINGS ARE LISTED FOR TWO MATERIALS HAVING THE FOLLOWING PROPERTIES:

Material

304/316 Stainless Steel

6061-T6 Aluminum

Yield Stress (KSI)

30

37

Mod of Elasticity (KSI)

28100

10000

4 SLOT STANDARD

1 SLOT STANDARD OVERALL LENGTH

916 ".394"

SLOT LENGTH

2"

1"

Drawing Number:

Drawing Title:

A A

B B

2

2

1

1

Date:Material:





ROCKET RACK® Standard

D608,183S & D599,194S MM MM/RM 2-2018

STD.




21







• Load ratings are based on ASD, 9TH Edition, Section F1, however it is suggested that the loads in the tables be reduced by a Factor of Safety of 2 for safe performance.




22


PART NUMBEROverall

RRSTD30412 | RRSTD31612 12"

14"

16"

18"

20"

22"

24"

26"

28"

30"

32"

34"

36"

38"

40"

42"

44"

46"

48"

50"

52"

54"

56"

58"

60"

1507

1256

1076

942

837

753

685

628

580

538

457

380

443

419

397

377

359

342

328

314

301

290

279

269

260

0.0045

0.0065

0.0088

0.0115

0.0146

0.0180

0.0218

0.0260

0.0305

0.0354

0.0370

0.0373

0.0521

0.0584

0.0651

0.0722

0.0796

0.0873

0.0954

0.1039

0.1127

0.1219

0.1315

0.1414

0.1517

1507

1256

1076

942

837

753

685

628

580

538

457

380

443

419

397

377

359

342

328

314

301

290

279

269

260

1507

1256

1076

942

837

753

685

628

580

538

457

380

443

419

397

377

359

342

328

314

301

290

279

269

260

3014

2511

2153

1883

1674

1507

1370

1256

1159

1076

915

760

886

837

793

753

718

685

655

628

603

580

558

538

520

0.0056

0.0081

0.0110

0.0144

0.0183

0.0225

0.0273

0.0325

0.0381

0.0442

0.0462

0.0466

0.0652

0.0731

0.0814

0.0902

0.0994

0.1091

0.1193

0.1299

0.1409

0.1524

0.1644

0.1768

0.1896

3014

2511

2153

1883

1674

1507

1370

1256

1159

1076

915

760

886

837

793

753

718

685

655

628

603

580

558

538

520

3014

2511

2153

1883

1674

1507

1370

1256

1159

1076

915

760

886

837

793

753

718

685

655

628

594

549

509

473

441

RRSTD30428 | RRSTD31628
























Length






(lbs.) (in.)(in.^4) (in.^3)

0.633 0.6260.248 0.209

Standard 304 & 316 Stainless 2x2x1/4








23



(lbs.) (in.)(in.^4) (in.^3)

0.633 0.6260.248 0.209

PART NUMBEROverall

RRSTDALU12 12"

14"

16"

18"

20"

22"

24"

26"

28"

30"

32"

34"

36"

38"

40"

42"

44"

46"

48"

50"

52"

54"

56"

58"

60"

1858

1549

1327

1161

1032

929

845

774

698

575

465

380

547

516

489

465

442

422

404

387

363

330

344

332

320

0.0156

0.0225

0.0306

0.0400

0.0506

0.0625

0.0756

0.0900

0.1032

0.1061

0.1057

0.1047

0.1807

0.2026

0.2257

0.2501

0.2757

0.3026

0.3307

0.3601

0.3815

0.3898

0.4558

0.4901

0.5258

1858

1549

1327

1161

1032

929

845

774

698

575

465

380

429

382

343

310

281

256

234

215

198

183

170

158

147

1858

1549

1327

1161

1019

826

682

573

489

421

367

323

286

255

229

206

187

171

156

143

132

122

113

105

98

3717

3097

2655

2323

2065

1858

1689

1549

1396

1150

931

760

1093

1032

978

929

885

845

808

774

726

659

688

664

641

0.0195

0.0281

0.0383

0.0500

0.0633

0.0781

0.0946

0.1125

0.1289

0.1327

0.1321

0.1309

0.2258

0.2532

0.2821

0.3126

0.3446

0.3782

0.4134

0.4501

0.4769

0.4873

0.5697

0.6127

0.6572

3717

3097

2655

2323

2065

1858

1638

1376

1173

1011

881

760

686

612

549

495

449

409

375

344

317

293

272

253

236

3717

3097

2655

2064

1631

1321

1092

917

782

674

587

516

457

408

366

330

300

273

250

229

211

195

181

169

157

RRSTDALU28

RRSTDALU20

RRSTDALU36

RRSTDALU46

RRSTDALU16

RRSTDALU32

RRSTDALU24

RRSTDALU40

RRSTDALU50

RRSTDALU56

RRSTDALU14

RRSTDALU30

RRSTDALU22

RRSTDALU38

RRSTDALU48

RRSTDALU54

RRSTDALU18

RRSTDALU34

RRSTDALU44

RRSTDALU26

RRSTDALU42

RRSTDALU52

RRSTDALU58

RRSTDALU60

Length



ROCKET RACK® STANDARDStandard 6061-T6 Aluminum 2x2x1/4





24






PART NUMBEROverall

RR3STD30436 | RR3STD31636 36"

38"

40"

42"

44"

46"

48"

50"

52"

54"

56"

58"

60"

62"

64"

66"

68"

70"

72"

1060

1001

948

901

858

819

783

751

721

693

667

643

621

600

581

563

546

530

515

2119

2002

1896

1801

1716

1638

1566

1501

1441

1386

1334

1287

1242

1201

1162

1126

1092

1060

1029

0.0417

0.0467

0.0520

0.0577

0.0636

0.0698

0.0762

0.0830

0.0901

0.0974

0.1051

0.1130

0.1212

0.1297

0.1385

0.1476

0.1570

0.1666

0.1766

2119

2002

1896

1801

1716

1638

1566

1501

1441

1386

1334

1287

1242

1201

1162

1126

1092

1060

1029

2119

2002

1896

1801

1716

1638

1566

1501

1441

1386

1334

1287

1242

1201

1162

1126

1092

1060

1029

RR3STD30452 | RR3STD31652


















Length






(lbs.) (in.)(in.^4) (in.^3)

1.008 0.6260.927 0.500

Standard 304 & 316 Stainless 3x3x1/4

0.0333

0.0374

0.0416

0.0461

0.0509

0.0558

0.0610

0.0664

0.0721

0.0779

0.0841

0.0904

0.0970

0.1038

0.1108

0.1181

0.1256

0.1333

0.1413

1060

1001

948

901

858

819

783

751

721

693

667

643

621

600

581

563

546

530

515

1060

1001

948

901

858

819

783

751

721

693

667

643

621

600

581

563

546

530

515




25







(lbs.) (in.)(in.^4) (in.^3)

1.008 0.9590.927 0.5


PART NUMBEROverall

RR3STDALU36 36"

38"

40"

42"

44"

46"

48"

50"

52"

54"

56"

58"

60"

62"

64"

66"

68"

70"

72"

1307

1234

1169

1111

1058

1010

966

926

889

854

823

793

766

741

717

694

673

653

635

2614

2469

2339

2222

2116

2020

1932

1851

1777

1709

1646

1587

1532

1481

1433

1389

1346

1307

1270

0.1444

0.1618

0.1803

0.1998

0.2203

0.2418

0.2643

0.2877

0.3122

0.3377

0.3642

0.3916

0.4201

0.4496

0.4800

0.5115

0.5440

0.5775

0.6119

2565

2288

2053

1853

1681

1532

1401

1287

1186

1097

1017

945

881

824

771

724

681

641

605

1710

1525

1369

1235

1121

1021

934

858

791

731

678

630

588

549

514

483

454

427

403

RR3STDALU52

RR3STDALU44

RR3STDALU60

RR3STDALU70

RR3STDALU40

RR3STDALU56

RR3STDALU48

RR3STDALU64

RR3STDALU38

RR3STDALU54

RR3STDALU46

RR3STDALU62

RR3STDALU72

RR3STDALU42

RR3STDALU58

RR3STDALU68

RR3STDALU50

RR3STDALU66

Length




0.1155

0.1295

0.1443

0.1598

0.1762

0.1934

0.2114

0.2302

0.2498

0.2701

0.2913

0.3133

0.3361

0.3597

0.3840

0.4092

0.4352

0.4620

0.4895

1307

1234

1169

1111

1051

957

876

804

741

685

636

591

551

515

482

452

425

401

378

1069

953

856

772

700

638

584

536

494

457

424

394

367

343

321

302

284

267

252

Standard 6061-T6 Aluminum 3x3x1/4

INFORMATION & DETAILS

ASK US ABOUT OUR LUNCH & LEARN PROGRAM

Thank you for your interest in the patented ROCKET RACK® Sanitary Support System for Electrical and Mechanical Installations.

Most items listed in this catalog are factory stock items to ensure quick order turnaround and product shipment to meet tight job time-line requirements.

For details on slot length & placement please call us at 903.680.4222.TO PLACE AN ORDER CALL 903.680.4222 OR SEND TO [email protected]

Since the invention of ROCKET RACK® by founder, Ron Meyer, ROCKET RACK continues to develop new and innovative products for our customers, always striving to make the contractor’s work easier, with faster and safer installations. Our design team is happy to assist with a unique and sanitary mounting solution for your next food-grade project. Just let us know what type of conduit or process piping you’ll be installing or the dimensions of any equipment you need to mount, and the size of the space you’ll be working in. We’ll be happy to support design efforts of your project! Our team has many years’ experience working in industrial facilities.

“ My customers really love the sleek design of ROCKET RACK® products. The racks have a nice simple, clean look and can be used in a variety of applications. No matter the project, the end result is a very sharp-looking installation.” - Electrical Contractor (Foreman), Missouri

“ We installed ROCKET RACK® supports for a recent plant upgrade. It was a quick and efficient installation. We’d previously had to custom make each support stand, and they don’t compare to your stands. We’re very pleased with the ROCKET RACK® product.” - Engineer, Pennsylvania




26

INNOVATION & DESIGNROCKET RACK® continues to develop new and innovative products. We're always striving to make

the contractor’s job easier, with faster and safer installations. Call and tell us about your next project,

and our design team can create a ROCKET RACK® solution for you.

" The unique & simple design of the ROCKET RACK® is perfect for my customer’s facilities. It creates such a beautiful installation. Fast and clean, too. Their customer service is outstanding – Ron and his team are very helpful when I need a one-of-a-kind rack. I just tell him the type of equipment we’re installing & the dimensions, and he comes up with the perfect mounting solution. Great products. Great company.”

- Engineer/Project Manager, Missouri


CATALOG - ROCKET RACK® · ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524...

Documents

Transcript of CATALOG - ROCKET RACK® · ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524...