CATALOG - Unistrutunistrut.us/E-document/Unistrut-Commercial/A104F719CBAA5D504503F... · A PART OF...
Transcript of CATALOG - Unistrutunistrut.us/E-document/Unistrut-Commercial/A104F719CBAA5D504503F... · A PART OF...
COVER
A PART OF
CATALOG
FITTING PIPE CLAMP POST BASE HARDWARE
22
UNISTRUT® COMMERCIALValue-engineered fittings for commercial projects
Unistrut® is the standard for industrial support systems. Many commercial projects do not require the extreme strength it delivers. The marketplace is demanding products designed for sleeker installations. With that in mind, our engineers have developed Unistrut® Commercial. This expanded product offering will complement our current product line by meeting the need for fittings used in lighter support applications. The line of .197” [5mm] thick fittings for use with 3⁄8˝ nuts and bolts is ideal to carry the equipment used in smaller commercial projects.
PRODUCT FEATURES
Value-engineered fittings for commercial projects
Specifically designed for use with 3⁄8 ˝ nuts and bolts
Hole size compatible with metric products
Many selections available pre-assembled for easier installation (includes pre-installed bolt & channel nut)
Lower package quantities for smaller commercial jobs
Electro-galvanized coating per ASTM B663 Zinc plating
All products have been fully tested and value engineered by Unistrut for optimum efficiency
Products manufactured to Unistrut quality standards
PRODUCT BENEFITS
Can be used with any size channel, especially suited for use with 14 gauge and 16 gauge
Perfect alternative to the ½˝ bolted system when industrial strength is not required
Eliminates the need for a flat washer with 3⁄8 ˝ bolts
Streamlined channel nut design offers maximum value
Value engineered for competitive pricing
Lighter weight, quicker installation leads to reduced labor costs
Lower total installed costs
Visit www.unistrut.us for comparative load ratings
®
3
Hex HeadCap Screws
Page 4
Hex SlottedMachine Screws
Page 4
HexagonNuts
Page 4
Channel NutWith Spring
Page 4
Channel Nut Without Spring
Page 4
Channel NutWith Spring
Page 4
SquareNuts
Page 4
FlatWashersPage 4
LockWashersPage 4
SteelThreaded Rod
Page 4
Pipe Clamps for Thin Wall Conduit (E.M.T.)Pipe Clamps for Rigid Steel Conduit
Page 5
SquareChannel Washer
Page 6
3 HoleConnector
Page 6
4 HoleConnector
Page 6
4 Hole“T”Connector
Page 6
2 HoleConnector
Page 6
4 HoleElbow Connector
Page 6
15 8" “Z”Connector
Page 7
13 16" “ZConnector
Page 8
15 8" ChannelSplicePage 8
15 8" Clevis Wing,2 LegsPage 8
15 8" Clevis Wing,3 LegsPage 8
15 8" 90°Wing
Page 8
13 16" 2 HoleChannel Splice
Page 8
15 8" “U”Connector
Page 8
13 16" “U”Connector
Page 8
2 HoleOpen 45° Fitting
Page 7
4 Hole90° Fitting
Page 7
3 Hole Flush90° Fitting
Page 7
3 Hole Flush90° Fitting
Page 7
3 Hole Bench90° Fitting
Page 7
2 Hole90° Fitting
Page 7
2 Hole90° Fitting
Page 7
Hardware Hardware
Pipe/Conduit Clamps Flat Fittings
Angle Fittings “Z” Shape Fittings
Post Bases
Brackets
Beam Clamps
“U” Shape Fittings
15 8" Single ChannelBracketPage 9
15 8" Double ChannelBracketPage 9
Page 915 8" Post Base
Page 9C Shape Channel
Beam ClampPage 10
Top Mount Beam ClampPage 10
U-Bolt Beam ClampPage 10
Cast Beam ClampPage 10
C Shape HD ChannelBeam Clamp
Page 10
15 8" WindowBeam Clamp
Page 10
Light Duty Beam ClampPage 10
3 HoleElbow Connector
Page 6
PICTORIAL INDEX
4
Part No. SizeBag
Quantity
Estimated Weight (Ea.)
LbsUCHCS025075EG 1⁄4" x 3⁄4" 25 0.017UCHCS025125EG 1⁄4" x 11⁄4" 25 0.024UCHCS037087EG* 3⁄8" x 7⁄8" 25 0.044UCHCS037125EG 3⁄8" x 11⁄4" 25 0.053UCHCS050125EG 1⁄2" x 11⁄4" 25 0.053UCHCS050150EG 1⁄2" x 11⁄2" 25 0.044* Assembled parts employ this bolt so the fitting will
work with any channel depth.
Hex Head Cap SCrewS Hex Slotted MaCHine SCrewS
Part No. Size
Bag Quantity
Estimated Weight (Ea.) Lbs
UCSHS025075EG 1⁄4" x 3⁄4" 25 0.017UCSHS031100EG 5⁄16" x 1" 25 0.026UCSHS037125EG 3⁄8" x 11⁄4" 25 0.030
Hexagon nutS
Part No. Size
Bag Quantity
Estimated Weight (Ea.) Lbs
UCHXN025EG 1⁄4" 50 0.006UCHXN037EG 3⁄8" 50 0.016UCHXN050EG 1⁄2" 25 0.048
Square nutS
Part No. Size
Bag Quantity
Estimated Weight (Ea.) Lbs
UCSQN025EG 1⁄4" 50 0.009UCSQN037EG 3⁄8" 50 0.027
loCk waSHerS
PartNo. Size
Bag Quantity
Estimated Weight (Ea.) Lbs
UCLKW025EG 1⁄4" 50 0.0025UCLKW037EG 3⁄8" 50 0.0063UCLKW050EG 1⁄2" 50 0.0132
Flat waSHerS
Part No. Size
Bag Quantity
Estimated Weight (Ea.) Lbs
UCFLW025EG 1⁄4" 50 0.008UCFLW037EG 3⁄8" 50 0.015UCFLW050EG 1⁄2" 50 0.035
Steel tHreaded rod
Standard Length 10' (3.0m)
Low Carbon Steel Fy = 32,000 psi minimumFt = 52,000 psi minimum
Part No. Size
Estimated Weight
(Ea.) LbsATHR-T-1/4-10EG 1⁄4" x 20 1.3ATHR-T-3/8-10EG 3⁄8" x 16 3ATHR-T-1/2-10EG 1⁄2" x 13 5.3
CHannel nut witHout Spring
Part No.
Nut SizeThread
Estimated Weight (Ea.) Lbs
UC3006 1/4" EG 1⁄4" - 20 0.06UC3008 3/8" EG 3⁄8" - 16 0.08UC 3010 1/2" EG 1⁄2" - 13 0.08
Use with any channel
Part No.
Nut SizeThread
Estimated Weight (Ea.) Lbs
UC1006 1/4" EG 1⁄4" - 20 0.07UC1008 3/8" EG 3⁄8" - 16 0.08
UC1010 1/2" EG 1⁄2" - 13 0.10
Use with Any Channel except P3300, P4100, P4000
Part No.
Nut SizeThread
Estimated Weight (Ea.) Lbs
UC4006 1/4" EG 1⁄4" - 20 0.07UC4008 3/8" EG 3⁄8" - 16 0.075UC4010 1/2" EG 1⁄2" - 13 0.08
Use with P3300, P4100, P4000 Channel
CHannel nut witH Spring
Hardware
5
Slotted hex head screw and nut included.
PIPE CLAMPS FOR THIN WALL CONDUIT (E.M.T.)
1 1 4"(32)
PartNo.
Conduit SizeIn (mm)
O.D. SizeIn (mm)
ThicknessGauge (mm)
Design Load
Estimated Weight (Ea.) Lbs
UC1425 EG (3/8") AS 3⁄8 (10) 0.577 (14.7) 16 (1.5) 400 0.09UC1426 EG (1/2") AS 1⁄2 (13) 0.706 (17.9) 16 (1.5) 400 0.11UC1427 EG (3/4") AS 3⁄4 (19) 0.922 (23.4) 16 (1.5) 400 0.12
UC1428 EG (1") AS 1 (25) 1.163 (29.5) 16 (1.5) 400 0.15UC1429 EG (1 1/4") AS 11⁄4 (32) 1.510 (38.4) 16 (1.5) 400 0.18UC1430 EG (1 1/2") AS 11⁄2 (38) 1.740 (44.2) 12 (2.7) 750 0.29
UC1431 EG (2") AS 2 (51) 2.197 (55.8) 12 (2.7) 750 0.33UC1118 EG (2 1/2") AS 21⁄2 (64) 2.875 (73.0) 12 (2.7) 750 0.4
UC1119 EG (3") AS 3 (76) 3.500 (88.9) 12 (2.7) 750 0.47UC1120 EG (3 1/2") AS 31⁄2 (89) 4.000 (101.6) 12 (2.7) 750 0.62
UC1121 EG (4") AS 4 (102) 4.500 (114.3) 12 (2.7) 750 0.67
PIPE CLAMPS FOR RIGID STEEL CONDUIT
11 4"(32)
Slotted hex head screw and nut included
Part No.
IPS Pipe or Rigid Conduit Size
InO.D. Size In (mm)
Thickness Gauge (mm)
Design Load
Estimated Weight (Ea.) Lbs
UC1109 EG (3/8") AS 3⁄8 0.675 (17.1) 16 (1.5) 400 0.1UC1111 EG (1/2") AS 1⁄2 0.840 (21.3) 16 (1.5) 400 0.11UC1112 EG (3/4") AS 3⁄4 1.050 (26.7) 16 (1.5) 400 0.15
UC1113 EG (1") AS 1 1.315 (33.4) 16 (1.5) 400 0.17UC1114 EG (1 1/4") AS 11⁄4 1.660 (42.2) 16 (1.5) 400 0.19UC1115 EG (1 1/2") AS 11⁄2 1.900 (48.3) 12 (2.7) 750 0.29
UC1117 EG (2") AS 2 2.375 (60.3) 12 (2.7) 750 0.34UC1118 EG (2 1/2") AS 21⁄2 2.875 (73.0) 12 (2.7) 750 0.4
UC1119 EG (3") AS 3 3.500 (88.9) 12 (2.7) 750 0.47UC1120 EG (3 1/2") AS 31⁄2 4.000 (101.6) 12 (2.7) 750 0.62
UC1121 EG (4") AS 4 4.500 (114.3) 12 (2.7) 750 0.67
PIPE CLAMPS
6
A
0.2” (5mm)Thick
FLAT PLATE FITTINGS
3 1 8"(80)
4 3 4"(120)
6 5 16"(160)
3 9 16"(90)
3 9 16"(90)
3 9 16"(90)
5 7 16"(138)
Part No. "A"
Estimated Weight (Ea.)
Lbs
UC1062 EG 14" 0.135
UC1063 EG 38" 0.13
US1064 EG 12" 0.128
Part No.
Estimated Weight (Ea.)
Lbs
UC1065 EG 0.285
UC1065 EG AS 0.553
Part No.
Estimated Weight (Ea.)
Lbs
UC1066 EG 0.42
UC1066 EG AS 0.822
Part No.
Estimated Weight (Ea.)
Lbs
UC1067 EG 0.59
UC1067 EG AS 1.126
Part No.
Estimated Weight (Ea.)
Lbs
UC1380A EG 0.6
Part No.
Estimated Weight (Ea.)
Lbs
UC1036 EG 0.44
UC1036 EG AS 0.842
Part No.
Estimated Weight (Ea.)
Lbs
UC1031 EG 0.6
UC1031 EG AS 1.136
SQUARE CHANNEL WASHER 2 HOLE CONNECTOR
3 HOLE CONNECTOR
4 HOLE CONNECTOR 4 HOLE ELBOW CONNECTOR
3 HOLE ELBOW CONNECTOR
4 HOLE "T" CONNECTOR
(136)5 3⁄8"
3 1⁄2"(89)
"AS" parts are furnished assembled. Unless otherwise noted, fittings are .197" (5mm) thick and hole size is 7⁄16". Assembled components are supplied with 3 8" x 7 8" bolt and channel nut, for use with all channel depths.
7
ANGLE, “Z” AND “U” SHAPE FITTINGS
1 15 16"(50)
1 7 8"(47)
1 5 8"(41)
2 1 4"(57)
4 1 8"(104)
(89)3 1 2" 1 5 8"
(41)
4 1 8"(104)
3 7 8"(98)
(47)1 7 8"
Part No.
Estimated Weight (Ea.)
Lbs
UC1026 EG 0.3
UC1026 EG AS 0.568
Part No.
Estimated Weight (Ea.)
Lbs
UC1068 EG 0.3
UC1068 EG AS 0.568
Part No.
Estimated Weight (Ea.)
Lbs
UC1325 EG 0.61
UC1325 EG AS 1.146
Part No.
Estimated Weight (Ea.)
Lbs
UC1326 EG 0.46
UC1326 EG AS 0.86
Part No.
Estimated Weight (Ea.)
Lbs
UC1346 EG 0.46
UC1346 EG AS 0.86
2 HOLE 90° FITTING 2 HOLE 90° FITTING
4 HOLE 90° FITTING 3 HOLE FLUSH 90° FITTING
3 HOLE FLUSH 90° FITTING
2 3 16"(56)
3 1 2"(89)
Part No.
Estimated Weight (Ea.)
Lbs
UC1458 EG 0.46
UC1458 EG AS 0.86
3 HOLE BENCH 90° FITTING
2 13 16"(71)
1 3 4"(44)
A
Part No.
Estimated Weight (Ea.)
Lbs
UC1546 EG 0.46
UC1546 EG AS 0.73
2 HOLE OPEN 45° FITTING
3 3 4"(95)
(54)2 1 8"
1 5 8"(41)
Part No.
Estimated Weight (Ea.)
Lbs
UC1045 EG 0.43
1 58” "Z" CONNECTOR
"AS" parts are furnished assembled. Unless otherwise noted, fittings are .197" (5mm) thick and hole size is 7⁄16". Assembled components are supplied with 3 8" x 7 8" bolt and channel nut, for use with all channel depths.
U1026
UniformDesign Load
(Safety Factor 2.5)2,000 Lbs
U1068
UniformDesign Load
(Safety Factor 2.5)2,000 Lbs
U1325
UniformDesign Load
(Safety Factor 2.5)4,000 Lbs
U1326
UniformDesign Load
(Safety Factor 2.5)1,000 Lbs
U1346
UniformDesign Load
(Safety Factor 2.5)2,000 Lbs
U1458
UniformDesign Load
(Safety Factor 2.5)2,000 Lbs
8
1 15 16"(49)
1 15 16"(49)
3 7 16"(88)
13 16"(21)
P4000P4100
5 3 8"(137)
13 16"(21)
P3300P4000P4100
1 11 16"(43)
Part No.
Estimated Weight (Ea.)
Lbs
UC1376 EG 1
Part No.
Estimated Weight (Ea.)
Lbs
UC2345 EG 0.73
Part No.
Estimated Weight (Ea.)
Lbs
UC2227 EG 0.89
Part No.
Estimated Weight (Ea.)
Lbs
UC2223 EG 0.6
Part No.
Estimated Weight (Ea.)
Lbs
UC4045 EG 0.37
Part No.
Estimated Weight (Ea.)
Lbs
UC4047 EG 0.56
Part No.
Estimated Weight (Ea.)
Lbs
UC4376 EG 0.67
1 58” CHANNEL SPLICE
1 58” CLEVIS WING, 2 LEGS 1 5
8” CLEVIS WING, 3 LEGS
1 58” 90° WING 13
16” "Z" CONNECTOR
1316” "U" CONNECTOR 13
16” 2 HOLE CHANNEL SPLICE
ANGLE, “Z” AND “U” SHAPE FITTINGS
(41)1 5 8"
(137)5 3 8"
1 11 16"(43) Part
No.
Estimated Weight (Ea.)
Lbs
UC1047 EG 0.69
1 58” "U" CONNECTOR
3 1 2"(89)
2"(51)
5 (137)
1 7⁄8"(48)
1332"
2"(51)
(137)1 7⁄8"(48)
(41)1 5⁄8"
(42)1 "21
32
5 "1332
3 1⁄2"(89)
"AS" parts are furnished assembled. Unless otherwise noted, fittings are .197" (5mm) thick and hole size is 7⁄16". Assembled components are supplied with 3 8" x 7 8" bolt and channel nut, for use with all channel depths.
9
0.2"(5.0)
3 1 2"(89)
Part No.
Estimated Weight (Ea.)
Lbs
UC2072A EG 2.93
UC2072A SQ EG 2.93
Part No.
Estimated Weight (Ea.)
Lbs
UC2941 EG 2.82
UC2942 EG 2.82
1 58” POST BASE
1 58” POST BASE
POST BASES & BRACKETS
Part No. "A"
Estimated Weight (Ea.)
Lbs
UC2945 EG 12" 2.9
UC2946 EG 18" 4
UC2947 EG 24" 5
Part No. "A"
Estimated Weight (Ea.)
Lbs
UC2542 EG 12" 5
UC2543 EG 18" 6.9
UC2544 EG 24" 8.8
1 58” SINGLE CHANNEL BRACKET
1 58” DOUBLE CHANNEL BRACKET
1⁄4"(9.5)
9⁄16" (for 1 2" Bolt)(14.3)
A
2"(50.8)
45 8"(117.5) P1000
1⁄4"(6.0)
9⁄16"(14.3)
61 4"(159)
A
2" (50.8)
P1001
"AS" parts are furnished assembled. Unless otherwise noted, fittings are .197" (5mm) thick and hole size is 7⁄16". Assembled components are supplied with 3 8" x 7 8" bolt and channel nut, for use with all channel depths.
UC2941 UC2942
2 Holes 11 11⁄16 " (18) Dia.
2 Holes ⁄16 " (18) Dia.
515⁄16"(150)
315⁄16"(100)
315⁄16"(100)
515⁄16"(150)
3 1⁄2"(89)
0.2"(5.0)
515⁄16"(150)
515⁄16"(150)
4 Holes3⁄4" (19) Dia. 4 Holes
3⁄4" (19) Dia.
515⁄16"(150)
515⁄16"(150)
UC2072AUC2072A SQ
10
3 8" X 11 2" Set Screw Included
7 8"(22)max.
3 16"(5)
1 15 16"(50)
1"(25)
1 3 16"(30)
3⁄8"(9.5)
7⁄8"(22)max
1 5 8"(41)
1 1 2"(38)
1 2" - 13 X 11 2" Set Screw Included
1 2"(13)max.
0.2"(5.0)2 1 16"
(52)
1 2" - 13 X 11 2" Hex Head Cap Screwand 1 2" Channel Nut
1 3 4"(45)
3 9 16"(90) 3 16"
(5)
3 9 16"(90)
7 8"(22)max.
3 8" X 11 2" Set Screw Included
HHu
7 8"(22)max.
2 15 16"(75)
3 16"(5)
3 8" U-Bolt
Mild steel "U" bolts are zinc plated.
Total Design Load (when Used in Pairs) UC2785 -- 1,500 LbsUC2786 -- 900 Lbs
Safety Factor 5
Part No.
Estimated Weight (Ea.)
Lbs
UC1272S EG 0.29
Part No.
Estimated Weight (Ea.)
Lbs
UC1985S 0.52
Part No.
Estimated Weight (Ea.)
Lbs
UC1386 EG AS 0.2Part No.
Estimated Weight (Ea.)
Lbs
UC1796S EG 0.69
Part No. "H" "Hu"
Estimated Weight (Ea.)
Lbs
UC2785 EG 15⁄8" 33⁄8" 0.7
UC2786 EG 31⁄2" 5" 0.79
C SHAPE CHANNEL BEAM CLAMP C SHAPE HD CHANNEL BEAM CLAMP
TOP MOUNT BEAM CLAMP 1 58” WINDOW BEAM CLAMP
U-BOLT BEAM CLAMP
BEAM CLAMPS
Part No.
Estimated Weight (Ea.)
Lbs
UC2893 EG 0.14
Part No.
Tapped Hole Size
Design Load Lbs.
Estimated Wt. (Ea.)
Lbs
UC2894-25 EG 1/4" - 20 250 0.23
UC2894-37 EG 3/8" - 16 500 0.95
UC2894-50 EG 1/2" - 13 1,000 1.95
LIGHT DUTY BEAM CLAMP
CAST BEAM CLAMP
Design Load75 Lbs
Safety Factor 5
Tapped forRod Size
Design Load(safety factor 5)
3⁄4"(19)
"AS" parts are furnished assembled. Unless otherwise noted, fittings are .197" (5mm) thick and hole size is 7⁄16". Assembled components are supplied with 3 8" x 7 8" bolt and channel nut, for use with all channel depths.
Total Design Load (when Used in Pairs) 1,400 LbsSafety Factor 5
Total Design Load (when Used in Pairs) 750 LbsSafety Factor 5
Total Design Load (when Used in Pairs) 900 LbsSafety Factor 5
11
The technical specification for UNISTRUT COMMERCIAL products shall include all pertinent elements of the Guide Specification as provided on page 19 of the Unistrut #17 catalog including:
Part 1 General01.01 Scope of Work01.02 Quality Assurance01.03 Submittals01.04 Product Delivery, Storage and Handling01.05 Guarantee
Part 2 Products2.01 Acceptable Manufacturers2.02 Materials2.03 Finishes, A2 Electro-galvanized (EG) and A4 Hot-Dip Galvanized (HG)
In addition to the aforementioned Product requirements the following product specifications are included for UNISTRUT COMMERCIAL metal framing fittings and components:
2.04 Design 2.04.1 Gage: The metal framing fittings shall be light weight and high strength. The standard connection fitting gage
shall be 5mm (.197 nominal) gage.2.04.2 Standard fitting connections: Metal Framing fittings shall be provided with fastener connection holes no larger than
7/16” nominal dia. to accommodate 3/8” diameter fasteners.2.04.3 Other Connections: Where ½” connections are required for trapeze drops or other similar installations, reduced
gage nuts shall be employed, however nut performance in slip resistance and pull-out strength shall be equivalent to the MFMA standard requirement (latest edition) for the bolt thread size required.
2.04.4 Ergonomics: Box quantities for metal framing fittings shall weigh no more than 30 lbs maximum.
2.05 Products: Manufacture, Testing and Certification2.05.1 The metal framing system shall be constructed from press and roll-formed products produced by a single
manufacturer. Products produced through other processes by third party partners (castings, fasteners, etc) shall be tested and certified by the metal framing fittings manufacturer.
2.05.2 All channel nuts shall be case hardened employing a heat treat and oil quench process to ensure consistent slip resistance.
2.05.3 All metal framing fittings shall be load rated by specific part numbers. The test set-up shall be with force applied vertical-down, beam load testing with fittings used in pairs. Test results including test set-up pictorials for fittings shall be available for submittal and review at the discretion of the owner. Allowable design loads shall be established based upon minimum safety factors applied to ultimate failure loads: Standard bolted connection fittings .....2.5 S.F.Pipe Clamps ............................................5 S.F.Beam Clamps ..........................................5 S.F.Channel Nuts ..........................................3 S.F.Certified test results shall be available and provided if requested by the Customer.
2.06 Packaging2.06.1 All products including welded channel brackets shall be shipped to Customers in boxes, clearly labeled with part
numbers, manufacturer’s information, country of origin and quantity per box.2.06.2 Box quantities shall be reduced from the standard packaging arrangements of full gage (1/4”) standard metal
framing fittings to accommodate tradesmen working at heights.
Part 3 Execution3.01 Examination3.02 Installation3.03 Cleanup3.04 Protection
SPECIFICATIONS
©2013 Atkore International, Inc. All rights reserved. USC-L-WebDocument
16100 S. Lathrop Ave.
Harvey, IL 60426
TOLL FREE / 800-882-5543
FAX / 708-339-7814
www.unistrut.us
®