catalog | Optical Cables Atmos | GelKore4sproducts.com/.../10_Binder_Optical-Atmos-GelKore.pdf ·...
Transcript of catalog | Optical Cables Atmos | GelKore4sproducts.com/.../10_Binder_Optical-Atmos-GelKore.pdf ·...
Optical Cables
Atmos | GelKorecatalog |
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
FTTH cables are used in the last
portion of an all-optical network, such
as fiber-to-the-home (FTTH) or fiber-
to-the-business (FTTB) networks. Acts
as a bridge between the distribution
network and the subscriber premises.
Fiber Count up to 12f
The dry water blocking materials
can easily be removed without the
use of cable cleaning solvents,
yielding significant labor cost
savings
Easy access single tube design
All dielectric design eliminates
grounding and/or bonding
Rapid deployment
Single PE Jacket suitable for short-
span applications
�
�
�
�
�
�
�
�
�
G.651 multi-mode fiber
G.652D single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
Water blocked
N/A
�
�
Outdoor
Aerial
Cable cut-away
Typical parameters
5.5 mm (0.22 in.) X 8.5 mm (0.34 in.)
Up to 12
40 kg/km (27 lb/kft)
100 mm (3.94 in.)
400 N (90 lbf)
Number of fibers
Nominal outer diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & Approvals
Outer PE jacket
FRP strength member
Water-swellable yarns
Fibers
Loose tube
Thixotrophic Jelly
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Central Tube Optical CablesStandard central tube with 2-12f
FTTH / FTTB Applications
Single Jacket
Steel Messenger Self Supporting
Test Procedure Specification
EIA/TIA-455-331350 N (during installation)
400 N (during operation)
220 N/cm
-40°C / 70 °C (-40 °F / 158 °F)
Cable Properties
Basic optical fiber
Strength member
Number of fibers in each tube
Number of loose tubes
Loose tube diameter
Color of loose tube
Color of fibers
Tensile strength test
Crush test
Temperature cycling
Bend radius (during installation)
Bend radius (during service)
Water penetration test
Mechanical Performance
Tube filling compound
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
All MM and SM type fiber
2 FRP rod, 1.6 mm (0.06 in.) O.D.
2-4-6-8-10-12
1
2.90 mm (0.12 in.) O.D.
Natural
Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua
Thixotropic jelly
Tube material PBT (Polybutylene Terephtalate)
Core filling compound No filling compound. There are water swellable yarns instead
Outer Jacket Black PE 1.1±0.1 mm (0.04±0.01 in.) nominal thickness
Approximate overall diameter 5.5 mm (0.22 in.) / 8.5 mm (0.34 in.)
150 mm (5.19 in.)
100 mm (3.94 in.)
1 m length in 24 hrs with no water leak
EIA/TIA-455-41
EIA/TIA-455-37
EIA/TIA-455-37
EIA/TIA-455-82
2-12 fibers FTTH/FTTB cable
1 thixotrophic jelly fi l led loose tube
Water swellable yarns
2 FRP rod strength elements
Medium density polyethylene outer jacket
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Central Tube Optical CablesStandard central tube with 2-12f
FTTH / FTTB Applications
Single Jacket
Steel Messenger Self Supporting
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
Single-mode
G.652D
1310/1550 nm
Attenuation (max)
Fiber Type
0.40 dB/km (1310 nm)
0.22 dB/km (1550 nm)
9.2 ± 0.5 µmMDF
Single-mode Fiber Specifications
Multi-mode
62.5 µm 50 µm
850/1300 nm 850/1300 nm
Fiber Type
Multi-mode Fiber Specifications
Chromatic Dispersion (max)
3.5 ps/(nm x km) (1310 nm)
18 ps/(nm x km) (1550 nm)
Attenuation (max)
3.5 dB/km (850 nm)
1.5 dB/km (1300 nm)
0.275 ± 0.015Numerical Aparature
Bandwidth (min)
200 MHz.km (850 nm)
500 MHz.km (1300 nm)
3.5 dB/km (850 nm)
1.5 dB/km (1300 nm)
0.2 ± 0.02
500 MHz.km (850 nm)
600 MHz.km (1300 nm)
35 in x 35 in x 39 in
13123 ft ± 10%Drum Length
Environmental & General Properties
Drum Size
27 lb/kftNet Weight
90 cm x 90 cm x 100 cm
4000 m ± 10%
40 kg/km
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Central Tube Optical CablesStandard central tube with 2-12f
FTTH / FTTB Applications
Single Jacket
Steel Messenger Self Supporting
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
ADSS cables are used on overhead
power lines and/or poles. The self
supporting design allows installations
independent of other wires/conductors.
�
�
�
�
�
�
�
�
Fiber Count up to 216f
Suitable for all types of aerial lines
Rapid deployment
Installs on live power lines
Single PE Jacket suitable for short-
span applications
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
Water blocked
Track resistant
�
�
Outdoor
Aerial
Cable cut-away
Typical parameters
11.2 mm (0.44 in) to 18.8 mm (0.74 in)
Up to 216
110 kg/km (074 lbs/kft) to 300 kg/km (202
20 x cable O.D.
2500 to 4000 N (562 to 899 lbf)
Number of fibers
Nominal outer diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
outer PE jacket
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
polyester tape
aramid yarn
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
GelKore ADSS Loose Tube Optical Cables
Single Jacket Standard buffer tube with 2-216f
All Dielectric Self Supporting Short span - averageLight -
Medium -
Heavy -
60 m (197 ft.) max
46 m (151 ft.) max
30 m (098 ft.) max
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Weight & cube
11.2 mm (0.44 in)110 Kg/km (074 lbs/kft)
12.6 mm (0.50 in)140 Kg/km (094 lbs/kft)
12.6 mm (0.50 in)140 Kg/km (094 lbs/kft)
14.6 mm (0.58 in)180 Kg/km (121 lbs/kft)
18.8 mm (0.74 in)300 Kg/km (202 lbs/kft)
18.8 mm (0.74 in)300 Kg/km (202 lbs/kft)
Cable Properties
002 - 036f
037 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 144f
145 - 216f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
Span length on NESC conditions
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
18.8 mm (0.74 in)300 Kg/km (202 lbs/kft)
diameterweight
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Tensile strength (N) NESC Medium
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
25004800
27005000
27005000
30005500
40007500
40007500
operatinginstall
operationinstall
operatinginstall
operatinginstall
operatinginstall
operatinginstall
40007500
operatinginstall
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
GelKore ADSS Loose Tube Optical Cables
Single Jacket Standard buffer tube with 2-216f
All Dielectric Self Supporting
Light
Medium
Heavy
Short span - averageLight -
Medium -
Heavy -
60 m (197 ft.) max
46 m (151 ft.) max
30 m (098 ft.) max
60 m (197 ft.) max
46 m (151 ft.) max
30 m (098 ft.) max
Sag 1.0%
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
ADSS cables are used on overhead
power lines and/or poles. The self
supporting design allows installations
independent of other wires/conductors.
�
�
�
�
�
Fiber Count up to 216f
Suitable for all types of aerial lines
Rapid deployment
Installs on live power lines
Single PE Jacket suitable for short-
span applications
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
�
�
�
Full range of protections
Full range of applications
Optional protections
�
�
Water blocked
Track resistant
�
�
Outdoor
Aerial
Cable cut-away
Typical parameters
11.6 mm (0.46 in) to 19.2 mm (0.76 in)
Up to 216
110 kg/km (074 lbs/kft) to 300 kg/km (202
20 x cable O.D.
3700 to 6700 N (832 to 1506 lbf)
Number of fibers
Nominal outer diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
outer PE jacket
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
polyester tape
aramid yarn
Standard buffer tube with 2-216f
Short span - averageLight -
Medium -
Heavy -
110 m (361 ft.) max
092 m (302 ft.) max
054 m (177 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Single Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Weight & cube
11.6 mm (0.46 in)110 Kg/km (074 lbs/kft)
13.0 mm (0.51 in)140 Kg/km (094 lbs/kft)
13.0 mm (0.51 in)140 Kg/km (094 lbs/kft)
15.0 mm (0.59 in)180 Kg/km (121 lbs/kft)
19.2 mm (0.76 in)300 Kg/km (202 lbs/kft)
19.2 mm (0.76 in)300 Kg/km (202 lbs/kft)
Cable Properties
002 - 036f
037 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 144f
145 - 216f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
Span length on NESC conditions
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
19.2 mm (0.76 in)300 Kg/km (202 lbs/kft)
diameterweight
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Tensile strength (N) NESC Medium
37006500
41007500
41007500
49009000
670012000
670012000
operatinginstall
operationinstall
operatinginstall
operatinginstall
operatinginstall
operatinginstall
670012000
operatinginstall
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
110 m (361 ft.) max
092 m (302 ft.) max
054 m (177 ft.) max
Sag 1.0%
Light
Medium
Heavy
Standard buffer tube with 2-216f
Short span - averageLight -
Medium -
Heavy -
110 m (361 ft.) max
092 m (302 ft.) max
054 m (177 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Single Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
ADSS cables are used on overhead
power lines and/or poles. The self
supporting design allows installations
independent of other wires/conductors.
�
�
�
�
�
�
�
�
Fiber Count up to 216f
Suitable for all types of aerial lines
Rapid deployment
Installs on live power lines
Available for long, medium and
short spans
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
Water blocked
Track resistant
�
�
Outdoor
Aerial
Cable cut-away
Typical parameters
13.3 mm (0.52 in) to 20.5 mm (0.81 in)
Up to 216
145 kg/km (097 lbs/kft) to 355 kg/km (238
20 x cable O.D.
5300 to 9400 N (1191 to 2113 lbf)
Number of fibers
Nominal outer diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
inner PE jacket
outer PE jacketaramid yarn
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
polyester tape
aramid yarn
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
Standard buffer tube with 2-216f
Short span - averageLight -
Medium -
Heavy -
150 m (492 ft.) max
122 m (400 ft.) max
074 m (243 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Dual Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Weight & cube
13.3 mm (0.52 in)145 Kg/km (097 lbs/kft)
14.7 mm (0.58 in)180 Kg/km (121 lbs/kft)
14.7 mm (0.58 in)180 Kg/km (121 lbs/kft)
16.5 mm (0.65 in)230 Kg/km (155 lbs/kft)
20.5 mm (0.81 in)355 Kg/km (238 lbs/kft)
20.5 mm (0.81 in)355 Kg/km (238 lbs/kft)
Cable Properties
002 - 036f
037 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 144f
145 - 216f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
20.5 mm (0.81 in)355 Kg/km (238 lbs/kft)
diameterweight
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Tensile strength (N) NESC Medium
53009500
590010000
590010000
700013000
940016000
940016000
operatinginstall
operationinstall
operatinginstall
operatinginstall
operatinginstall
operatinginstall
940016000
operatinginstall
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
Standard buffer tube with 2-216f
Short span - averageLight -
Medium -
Heavy -
150 m (492 ft.) max
122 m (400 ft.) max
074 m (243 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Dual Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
Span length on NESC conditions 150 m (492 ft.) max
122 m (400 ft.) max
074 m (243 ft.) max
Sag 1.0%
Light
Medium
Heavy
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
ADSS cables are used on overhead
power lines and/or poles. The self
supporting design allows installations
independent of other wires/conductors.
�
�
�
�
�
�
�
�
Fiber Count up to 216f
Suitable for all types of aerial lines
Rapid deployment
Installs on live power lines
Available for long, medium and
short spans
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
Water blocked
Track resistant
�
�
Outdoor
Aerial
Cable cut-away
Typical parameters
14.1 mm (0.56 in) to 21.2 mm (0.84 in)
Up to 216
165 kg/km (111 lbs/kft) to 380 kg/km (255
20 x cable O.D.
9800 to 17600 N (2203 to 3957 lbf)
Number of fibers
Nominal outer diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
Standard buffer tube with 2-216f
Medium span - averageLight -
Medium -
Heavy -
290 m (951 ft.) max
250 m (820 ft.) max
160 m (525 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Dual Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
inner PE jacket
outer PE jacketaramid yarn
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
polyester tape
aramid yarn
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Weight & cube
14.1 mm (0.56 in)165 Kg/km (111 lbs/kft)
15.5 mm (0.61 in)200 Kg/km (134 lbs/kft)
15.5 mm (0.61 in)200 Kg/km (134 lbs/kft)
17.3 mm (0.68 in)245 Kg/km (165 lbs/kft)
21.2 mm (0.84 in)380 Kg/km (255 lbs/kft)
21.2 mm (0.84 in)380 Kg/km (255 lbs/kft)
Cable Properties
002 - 036f
037 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 144f
145 - 216f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
21.2 mm (0.84 in)380 Kg/km (255 lbs/kft)
diameterweight
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Tensile strength (N) NESC Medium
980016000
1110018000
1110018000
1290021000
1760029000
1760029000
operatinginstall
operationinstall
operatinginstall
operatinginstall
operatinginstall
operatinginstall
1760029000
operatinginstall
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
Standard buffer tube with 2-216f
Medium span - averageLight -
Medium -
Heavy -
290 m (951 ft.) max
250 m (820 ft.) max
160 m (525 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Dual Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
Span length on NESC conditions 290 m (951 ft.) max
250 m (820 ft.) max
160 m (525 ft.) max
Sag 1.0%
Light
Medium
Heavy
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
ADSS cables are used on overhead
power lines and/or poles. The self
supporting design allows installations
independent of other wires/conductors.
�
�
�
�
�
�
�
�
Fiber Count up to 216f
Suitable for all types of aerial lines
Rapid deployment
Installs on live power lines
Available for long, medium and
short spans
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
Water blocked
Track resistant
�
�
Outdoor
Aerial
Cable cut-away
Typical parameters
14.6 mm (0.58 in) to 21.8 mm (0.86 in)
Up to 216
180 kg/km (121 lbs/kft) to 405 kg/km (272
20 x cable O.D.
16100 to 27000 N (3619 to 6070 lbf)
Number of fibers
Nominal outer diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
Standard buffer tube with 2-216f
Long span - averageLight -
Medium -
Heavy -
640 m (2100 ft.) max
500 m (1640 ft.) max
320 m (1050 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Dual Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
inner PE jacket
outer PE jacketaramid yarn
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
polyester tape
aramid yarn
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Weight & cube
14.6 mm (0.58 in)180 Kg/km (121 lbs/kft)
16.0 mm (0.63 in)215 Kg/km (144 lbs/kft)
16.0 mm (0.63 in)215 Kg/km (144 lbs/kft)
17.8 mm (0.70 in)265 Kg/km (178 lbs/kft)
21.8 mm (0.86 in)405 Kg/km (272 lbs/kft)
21.8 mm (0.86 in)405 Kg/km (272 lbs/kft)
Cable Properties
002 - 036f
037 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 144f
145 - 216f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
21.8 mm (0.86 in)405 Kg/km (272 lbs/kft)
diameterweight
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Tensile strength (N) NESC Medium
1610027500
1730030000
1730030000
2000035000
2750045000
2700045000
operatinginstall
operationinstall
operatinginstall
operatinginstall
operatinginstall
operatinginstall
2700045000
operatinginstall
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
Standard buffer tube with 2-216f
Long span - averageLight -
Medium -
Heavy -
640 m (2100 ft.) max
500 m (1640 ft.) max
320 m (1050 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Dual Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
Span length on NESC conditions 640 m (2100 ft.) max
500 m (1640 ft.) max
320 m (1050 ft.) max
Sag 1.5%
Light
Medium
Heavy
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
ADSS cables are used on overhead
power lines and/or poles. The self
supporting design allows installations
independent of other wires/conductors.
�
�
�
�
�
�
�
�
Fiber Count up to 216f
Suitable for all types of aerial lines
Rapid deployment
Installs on live power lines
Available for long, medium and
short spans
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
Water blocked
Track resistant
�
�
Outdoor
Aerial
Cable cut-away
Typical parameters
15.8 mm (0.62 in) to 23.0 mm (0.91 in)
Up to 216
210 kg/km (141 lbs/kft) to 470 kg/km (316
20 x cable O.D.
22300 to 38000 N (5013 to 8543 lbf)
Number of fibers
Nominal outer diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
Standard buffer tube with 2-216f
Transmission span - averageLight -
Medium -
Heavy -
950 m (3117 ft.) max
800 m (2625 ft.) max
490 m (1608 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Dual Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
inner PE jacket
outer PE jacketaramid yarn
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
polyester tape
aramid yarn
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Weight & cube
15.8 mm (0.62 in)210 Kg/km (141 lbs/kft)
17.1 mm (0.67 in)245 Kg/km (165 lbs/kft)
17.1 mm (0.67 in)245 Kg/km (165 lbs/kft)
19.0 mm (0.75 in)290 Kg/km (195 lbs/kft)
23.0 mm (0.91 in)470 Kg/km (316 lbs/kft)
23.0 mm (0.91 in)470 Kg/km (316 lbs/kft)
Cable Properties
002 - 036f
037 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 144f
145 - 216f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
diameterweight
23.0 mm (0.91 in)470 Kg/km (316 lbs/kft)
diameterweight
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Tensile strength (N) NESC Medium
2230038000
2480042000
2480042000
2800048000
3800058000
3800058000
operatinginstall
operationinstall
operatinginstall
operatinginstall
operatinginstall
operatinginstall
3800058000
operatinginstall
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
Standard buffer tube with 2-216f
Transmission span - averageLight -
Medium -
Heavy -
950 m (3117 ft.) max
800 m (2625 ft.) max
490 m (1608 ft.) max
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Dual Jacket
All Dielectric Self Supporting
GelKore ADSS Loose Tube Optical Cables
Span length on NESC conditions 950 m (3117 ft.) max
800 m (2625 ft.) max
490 m (1608 ft.) max
Sag 2.0%
Light
Medium
Heavy
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
�
�
�
�
�
�
�
�
�
Fiber Count up to 288f
Suitable for all types of light aerial
applications except power lines
Low installation costs
Excellent handling characteristics
Utilizes traditional aerial cable
hardware
Suitable for short and medium
spans
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
�
�
Water blocked
HDPE jacket
Single jacket / single armor
Dual jacket / single armor
�
�
Outdoor
Aerial
Self supporting outdoor fiber optic
cable in a figure 8 configuration for
aerial installation on telecom poles.
Designed for maximum typical span
lengths of 152 m (500 ft.) under NESC
heavy loading conditions.
Cable cut-away
Typical parameters
11.6 mm (0.46 in)
Up to 288
316 kg/km (212 lbs/kft) to 522 kg/km (351 lbs/kft)
20 x cable O.D.
13360 N (3000 lbf)
Number of fibers
Diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
GelKore Loose Tube Optical Cables
PE jacket
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
Standard buffer tube with 2-288f
polyester tape
aramid yarn
NESC Heavy Conditions
Steel Messenger Self Supporting Fig-8 Sheath
Single Jacket / Dielectric Core
steel messenger
major axes
minor axes
11.5 mm (0.45 in) to 21.5 mm(0.85)
Max. Span 152 m (500 ft.)
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
13360 N (3000 lbf)
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Diameter
11.5 mm (0.45 in)11.6 mm (0.46 in)
12.2 mm (0.48 in)11.6 mm (0.46 in)
14.1 mm (0.56 in)11.6 mm (0.46 in)
16.1 mm (0.63 in)11.6 mm (0.46 in)
17.6 mm (0.69 in)11.6 mm (0.46 in)
18.4 mm (0.72 in)11.6 mm (0.46 in)
Cable Properties
002 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 192f
193 - 216f
217 - 240f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
Max. tensile load
Jacket core diameterJacket messenger diameter
19.5 mm (0.77 in)11.6 mm (0.46 in)
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Weight
316 kg/km (212 Ibs/kft)
241 - 288f 21.5 mm (0.85 in)11.6 mm (0.46 in)
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
330 kg/km (222 Ibs/kft)
364 kg/km (245 Ibs/kft)
405 kg/km (272 Ibs/kft)
420 kg/km (282 Ibs/kft)
441 kg/km (296 Ibs/kft)
467 kg/km (314 Ibs/kft)
522 kg/km (351 Ibs/kft)
EIA/TIA-455-33FOTP-33
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
GelKore Loose Tube Optical Cables
Standard buffer tube with 2-288fNESC Heavy Conditions
Steel Messenger Self Supporting Fig-8 Sheath
Single Jacket / Dielectric Core
Max. Span 152 m (500 ft.)
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
�
�
�
�
�
�
�
�
�
�
Fiber Count up to 288f
Suitable for all types of light aerial
applications except power lines
Low installation costs
Excellent handling characteristics
Utilizes traditional aerial cable
hardware
Suitable for short and medium
spans
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
�
�
�
Water blocked
Rodent resistant
HDPE jacket
All dielectric
Dual jacket / single armor
�
�
Outdoor
Aerial
Self supporting outdoor fiber optic
cable in a figure 8 configuration for
aerial installation on telecom poles.
Designed for maximum typical span
lengths of 152 m (500 ft.) under NESC
heavy loading conditions.
Cable cut-away
Typical parameters
11.6 mm (0.46 in)
Up to 288
370 kg/km (249 lbs/kft) to 620 kg/km (417 lbs/kft)
20 x cable O.D.
13360 N (3000 lbf)
Number of fibers
Diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
GelKore Loose Tube Optical Cables
corrugated steel armor
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
Standard buffer tube with 2-288f
polyester tape
aramid yarn
NESC Heavy Conditions
Single Jacket / Single Armor
steel messenger
major axes
minor axes
13.4 mm (0.53 in) to 23.5 mm(0.93)
Max. Span 152 m (500 ft.)
PE jacket
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
Steel Messenger Self Supporting Fig-8 Sheath
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
13360 N (3000 lbf)
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Diameter
13.4 mm (0.53 in)11.6 mm (0.46 in)
14.2 mm (0.56 in)11.6 mm (0.46 in)
16.1 mm (0.63 in)11.6 mm (0.46 in)
18.1 mm (0.71 in)11.6 mm (0.46 in)
19.6 mm (0.77 in)11.6 mm (0.46 in)
20.4 mm (0.80 in)11.6 mm (0.46 in)
Cable Properties
002 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 192f
193 - 216f
217 - 240f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
Max. tensile load
Jacket core diameterJacket messenger diameter
21.5 mm (0.85 in)11.6 mm (0.46 in)
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Weight
370 kg/km (249 Ibs/kft)
241 - 288f 23.5 mm (0.93 in)11.6 mm (0.46 in)
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
390 kg/km (262 Ibs/kft)
431 kg/km (290 Ibs/kft)
480 kg/km (323 Ibs/kft)
499 kg/km (335 Ibs/kft)
523 kg/km (351 Ibs/kft)
556 kg/km (374 Ibs/kft)
620 kg/km (417 Ibs/kft)
EIA/TIA-455-33FOTP-33
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
GelKore Loose Tube Optical Cables
Standard buffer tube with 2-288fNESC Heavy Conditions
Single Jacket / Single Armor
Max. Span 152 m (500 ft.)
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.
Steel Messenger Self Supporting Fig-8 Sheath
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
Sp
eci
fica
tions
are
sub
ject
to c
ha
ng
e w
ithout
prior
notice
. 4
SPro
duct
s ca
ble
s a
re d
esi
gned
and
test
ed
per
IEC s
peci
fica
tions.
Application
Benefits
Fiber types
�
�
�
�
�
�
�
�
�
Fiber Count up to 288f
Suitable for all types of light aerial
applications except power lines
Low installation costs
Excellent handling characteristics
Utilizes traditional aerial cable
hardware
Suitable for short and medium
spans
G.651 multi-mode fiber
G.652 single-mode fiber
G.655 NZDS fiber for DWDM
applications
Full range of protections
Full range of applications
Optional protections
�
�
�
�
�
Water blocked
Rodent resistant
HDPE jacket
All dielectric
Single jacket / single armor
�
�
Outdoor
Aerial
Self supporting outdoor fiber optic
cable in a figure 8 configuration for
aerial installation on telecom poles.
Designed for heavy duty applications
and maximum typical span lengths of
152 m (500 ft.) under NESC heavy
loading conditions.
Cable cut-away
Typical parameters
11.6 mm (0.46 in)
Up to 288
424 kg/km (285 lbs/kft) to 718 kg/km (482 lbs/kft)
20 x cable O.D.
13360 N (3000 lbf)
Number of fibers
Diameter
Cable weight
Max. bend radius
Max. working tension
Operating temperature range -40 °C / 70 °C (-40 °F / 158 °F)
GelKore Loose Tube Optical Cables
corrugated steel armor
petroleum jelly
thixotropic jellydielectric central member
optical fiber
buffer tube
ripcord
Standard buffer tube with 2-288f
polyester tape
aramid yarn
NESC Heavy Conditions
Steel Messenger Self Supporting Fig-8 Sheath
Dual Jacket / Single Armor
steel messenger
major axes
minor axes
15.3 mm (0.60 in) to 25.5 mm(1.00)
Max. Span 152 m (500 ft.)
inner PE jacket
outer PE jacket
www.4SProducts.com
4621 Ponce de Leon Boulevard
Coral Gables, FL 33146, USA
[1] 305.666.7474
[1] 305.666.7272 fax
[email protected] e-mail
1st ISSUE
REA PE-90
Bellcore Standards
ITU Standards
TIA/EIA Standards
Qualifications & approvals
Test Procedure Specification
EIA/TIA-455-37AFOTP-37
EIA/TIA-455-25AFOTP-25
EIA/TIA-455-41AFOTP-41
EIA/TIA-455-85FOTP-85
EIA/TIA-455-104FOTP-104
EIA/TIA-455-37AFOTP-37
20 x cable O.D.
@ -30 °C and 60 °C
25 impact cycles
220 N/cm (124 lbs/in.)
2 meter length ± 180°
20 x cable O.D.
25 cycles
20 x cable O.D.
10 x cable O.D.
13360 N (3000 lbf)
Test Procedure Specification
EIA/TIA-455-3AFOTP-3
EIA/TIA-455-37FOTP-37
EIA/TIA-455-98FOTP-98
EIA/TIA-455-82BFOTP-82
EIA/TIA-455-81BFOTP-81
Telcordia GR-20
168 hours @ 85 °C
Frozen in ice
75 °C
Colors stable after aging
1meter for 24 hours
Operation
Installation
Storage/Shipping
-40 to +70 °C (-40 to +158 °F)
-20 to +70 °C (-04 to +158 °F)
-40 to +75 °C (-40 to +168 °F)
Diameter
15.3 mm (0.60 in)11.6 mm (0.46 in)
16.2 mm (0.64 in)11.6 mm (0.46 in)
18.1 mm (0.71 in)11.6 mm (0.46 in)
20.1 mm (0.79 in)11.6 mm (0.46 in)
21.5 mm (0.85 in)11.6 mm (0.46 in)
22.4 mm (0.88 in)11.6 mm (0.46 in)
Cable Properties
002 - 060f
061 - 072f
073 - 096f
097 - 120f
121 - 192f
193 - 216f
217 - 240f
Low & high temperature cable
Impact resistance
Compressive strength
Cable twist
Cable cyclic flexing
Max. bend radius
Max. tensile load
Jacket core diameterJacket messenger diameter
23.5 mm (0.93 in)11.6 mm (0.46 in)
Cable aging
Cable Freezing
Water penetration
Compound drip temperature
Color coding permanence
Environmental Performance
Temperature
Mechanical Performance
Weight
424 kg/km (285 Ibs/kft)
241 - 288f 25.5 mm (1.00 in)11.6 mm (0.46 in)
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
Jacket core diameterJacket messenger diameter
450 kg/km (302 Ibs/kft)
498 kg/km (335 Ibs/kft)
556 kg/km (374 Ibs/kft)
578 kg/km (388 Ibs/kft)
610 kg/km (410 Ibs/kft)
645 kg/km (433 Ibs/kft)
718 kg/km (482 Ibs/kft)
EIA/TIA-455-33FOTP-33
4SProducts
Optical Cable Assemblies
Technical
Data Sheet
Atmos
GelKore Loose Tube Optical Cables
Standard buffer tube with 2-288fNESC Heavy Conditions
Steel Messenger Self Supporting Fig-8 Sheath
Dual Jacket / Single Armor
Max. Span 152 m (500 ft.)
1st ISSUE
Specifications are subject to change without notice. The data given is subject to normal manufacturing tolerances.
4SProducts Loose Tube Optical Cables are tested in accordance with the requirements of Bellcore GR-20.
Performance specifications are measured per EIA Fiber Optic Test Procedures.