Catalog: Fittings, Flow Controls, Mufflers Series Accessories · Fitting Style 103= Straight 109 =...
Transcript of Catalog: Fittings, Flow Controls, Mufflers Series Accessories · Fitting Style 103= Straight 109 =...
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.2
ACCESSORIES
Numatics’ World Thread™ IN Fittings provide extreme versatility in use, which no longer requires the management of different fittings for different thread types or application.
• Extremely versatile – One fitting design for multiple thread types
• Rapid assembly – Requires fewer turns to tighten and seal
• Reusable – Fittings can be used several times without gasket deterioration• Reliable seal – Helical thread profile and PTFE gasket ensure proper seal• Maximum working pressure: 265 PSIG at 68 °F (18 bar at 20°C)• Conductor compatibility – Nylon, Polyurethane, Polyethylene
Numatics’ World Thread™ is designed with a helical thread design that represents the envelope for the profile of the NPTF, ISO 228/1 (BSPP), (G-Tap), ISO 7/1 (BSPT), (JIS B 0202) and (JIS B 0203) thread types. In conjunction with the thread design the seal between the male and female threads is created with a PTFE gasket, housed in a groove at the rear of the thread. This gasket seal meets UNI 571-65 standards.
O-ring (PTFE, Buna-N, FKM available)
O-ring (Buna-N, FKM available)
Stop Bushing (Brass)
Locking Ring (Stainless Steel)
Lead Bushing (Brass)
Housing (Brass, Nickel-plated)
Release Ring (Brass)• Pressure Rating to 265 psi• Temperature Range:
-20 °F to 176 °F (Buna-N O-ring) -20 °F to 230 °F (FKM O-ring)
• Tube Diameter: 1/8" to 1/2" 4mm to 12mm
• Thread Size: 1/8" to 1/2"
* See Fitting Style Charts on pages 3 – 6 for available Tube and Thread Configurations.
Tube SizeInch108 = 1/8"532 = 5/32"104 = 1/4"516 = 5/16"308 = 3/8"102 = 1/2"
Metric004 = 4mm005 = 5mm006 = 6mm008 = 8mm010 = 10mm012 = 12mm
*
INW Thread Size020 = 1/8"021 = 1/4"022 = 3/8"023 = 1/2"
NWB Thread Size000 = 1/8"001 = 1/4"002 = 3/8"003 = 1/2"
Options(blank) = Buna-N O-ringF = FKM O-ring
Fitting Style103 = Straight109 = Swivel Elbow109E = Extended Swivel Elbow114 = Swivel Branch Tee116 = Swivel Run Tee
Fitting SeriesINWB = World Thread™ Inch Tube (All Brass)NWB = World Thread™ Metric Tube (All Brass)
INWB 103 104 022
How to OrderWorld Thread™ Fittings
WORLD THREAD™ FITTINGS
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.3
ACCESSORIES
Brass Release Ring INWB109E
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW SW1
INWB 109E-108-020 1/8 1/8 0.709 0.236 1.043 2.067 0.512 0.531 0.591 0.591
INWB 109E-108-021 1/8 1/4 0.748 0.315 1.043 2.106 0.512 0.531 0.591 0.709
INWB 109E-532-020 5/32 1/8 0.394 0.157 0.638 1.461 0.374 0.472 0.354 0.512
INWB 109E-532-021 5/32 1/4 0.394 0.157 0.638 1.598 0.512 0.472 0.354 0.591
INWB 109E-104-020 1/4 1/8 0.394 0.157 0.657 1.457 0.374 0.492 0.354 0.512
INWB 109E-104-021 1/4 1/4 0.394 0.157 0.657 1.594 0.512 0.492 0.354 0.591
INWB 109E-104-022 1/4 3/8 0.472 0.157 0.740 1.575 0.374 0.531 0.433 0.512
INWB 109E-516-020 5/16 1/8 0.472 0.236 0.740 1.693 0.512 0.531 0.433 0.591
INWB 109E-516-021 5/16 1/4 0.472 0.236 0.740 1.732 0.512 0.531 0.433 0.709
INWB 109E-516-022 5/16 3/8 0.591 0.157 0.925 1.772 0.374 0.531 0.551 0.512
INWB 109E-308-020 3/8 1/8 0.591 0.236 0.925 1.909 0.512 0.531 0.551 0.591
INWB 109E-308-021 3/8 1/4 0.630 0.315 0.925 1.969 0.512 0.531 0.551 0.709
INWB 109E-308-022 3/8 3/8 0.669 0.157 1.043 1.929 0.374 0.531 0.591 0.512
INWB109E Extended Swivel Elbow/Inch Tube
Brass Release Ring INWB109
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW SW1
INWB 109-108-020 1/8 1/8 0.394 0.157 0.650 0.768 0.217 0.472 0.354 0.500
INWB 109-108-021 1/8 1/4 0.394 0.157 0.650 0.768 0.303 0.472 0.354 0.594
INWB 109-532-021 5/32 1/4 0.394 0.157 0.669 0.874 0.303 0.492 0.354 0.594
INWB 109-104-020 1/4 1/8 0.472 0.157 0.768 0.799 0.217 0.531 0.433 0.500
INWB 109-104-021 1/4 1/4 0.472 0.236 0.768 0.8155 0.303 0.531 0.433 0.594
INWB 109-516-020 1/4 1/8 0.472 0.236 0.768 0.906 0.323 0.531 0.433 0.750
INWB 109-516-021 5/16 1/4 0.591 0.157 0.945 0.878 0.217 0.650 0.551 0.500
INWB 109-308-020 3/8 1/8 0.689 0.157 1.063 0.929 0.217 0.669 0.630 0.500
INWB 109-308-021 3/8 1/4 0.689 0.236 1.063 0.945 0.303 0.669 0.630 0.594
INWB 109-308-022 3/8 3/8 0.689 0.315 1.063 1.039 0.323 0.669 0.630 0.750
INWB 109-308-023 3/8 1/2 0.689 0.315 1.063 1.197 0.406 0.669 0.630 0.938
INWB 109-102-021 1/2 1/4 0.827 0.236 1.201 1.059 0.303 0.728 0.688 0.594
INWB 109-102-022 1/2 3/8 0.827 0.315 1.201 1.122 0.323 0.728 0.688 0.750
INWB 109-102-023 1/2 1/2 0.827 0.315 1.201 1.280 0.406 0.728 0.688 0.938
INWB109 Swivel Elbow/Inch Tube
Brass Release Ring INWB103
Tube Diameter
(T)Thread
(F) D D2 L L2 H SW SW2
INWB 103-108-020 1/8 1/8 0.370 0.472 0.709 0.217 0.472 0.375 0.063
INWB 103-108-021 1/8 1/4 0.370 0.591 0.787 0.303 0.472 0.375 0.063
INWB 103-532-020 5/32 1/8 0.390 0.512 0.709 0.217 0.492 0.438 0.063
INWB 103-532-021 5/32 1/4 0.390 0.591 0.795 0.303 0.492 0.438 0.063
INWB 103-104-020 1/4 1/8 0.465 0.552 0.799 0.217 0.531 0.500 0.156
INWB 103-104-021 1/4 1/4 0.465 0.591 0.886 0.303 0.531 0.500 0.156
INWB 103-104-022 1/4 3/8 0.465 0.748 0.906 0.323 0.531 0.500 0.156
INWB 103-516-020 5/16 1/8 0.689 0.787 0.925 0.323 0.650 0.594 0.156
INWB 103-516-021 5/16 1/4 0.689 0.945 1.004 0.406 0.650 0.594 0.219
INWB 103-516-022 5/16 3/8 0.807 0.866 1.004 0.303 0.650 0.594 0.219
INWB 103-308-020 3/8 1/8 0.807 0.866 1.043 0.323 0.669 0.688 0.156
INWB 103-308-021 3/8 1/4 0.807 0.945 1.043 0.406 0.669 0.688 0.219
INWB 103-308-022 3/8 3/8 0.807 0.866 1.071 0.323 0.669 0.688 0.250
INWB 103-308-023 3/8 1/2 0.807 0.945 1.161 0.406 0.669 0.688 0.250
INWB 103-102-021 1/2 1/4 0.807 0.945 1.142 0.406 0.728 0.813 0.250
INWB 103-102-022 1/2 3/8 0.807 0.866 1.181 0.323 0.728 0.813 0.250
INWB 103-102-023 1/2 1/2 0.807 0.945 1.220 0.406 0.728 0.813 0.375
Dimensional Drawings - INWB103 Male Connector/Inch TubeDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.4
ACCESSORIES
Brass Release Ring INWB116
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW SW1
INWB 116-108-020 1/8 1/8 0.394 0.157 0.650 0.768 0.217 0.472 0.354 0.500
INWB 116-532-020 5/32 1/8 0.394 0.157 0.650 0.768 0.217 0.492 0.354 0.500
INWB 116-532-021 5/32 1/4 0.394 0.157 0.638 0.787 0.303 0.492 0.354 0.594
INWB 116-104-020 1/4 1/8 0.472 0.157 0.638 0.886 0.217 0.531 0.433 0.500
INWB 116-104-021 1/4 1/4 0.472 0.236 0.657 0.906 0.303 0.531 0.433 0.594
INWB 116-104-022 1/4 3/8 0.472 0.236 0.657 0.965 0.323 0.531 0.433 0.750
INWB 116-516-020 5/16 1/8 0.591 0.157 0.740 0.874 0.217 0.650 0.551 0.500
INWB 116-516-021 5/16 1/4 0.591 0.236 0.740 0.886 0.303 0.650 0.551 0.594
INWB 116-308-021 3/8 1/4 0.689 0.236 0.925 0.945 0.303 0.669 0.630 0.594
INWB 116-308-022 3/8 3/8 0.689 0.315 0.925 1.043 0.323 0.669 0.630 0.750
INWB 116-308-023 3/8 1/2 0.689 0.315 0.925 1.201 0.406 0.669 0.630 0.938
INWB 116-102-021 1/2 1/4 0.827 0.236 1.043 1.063 0.303 0.728 0.688 0.594
INWB 116-102-022 1/2 3/8 0.827 0.315 1.043 1.122 0.323 0.728 0.688 0.750
INWB 116-102-023 1/2 1/2 0.827 0.315 1.043 1.280 0.406 0.728 0.688 0.938
INWB116 Swivel Run Tee/Inch Tube
Brass Release Ring INWB114
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW SW1
INWB 114-108-020 1/8 1/8 0.394 0.157 0.650 0.768 0.217 0.472 0.354 0.500
INWB 114-108-021 1/8 1/4 0.394 0.157 0.650 0.787 0.303 0.472 0.354 0.594
INWB 114-532-020 5/32 1/8 0.394 0.157 0.669 0.768 0.217 0.492 0.354 0.500
INWB 114-104-020 1/4 1/8 0.472 0.157 0.768 0.886 0.217 0.531 0.433 0.500
INWB 114-104-021 1/4 1/4 0.472 0.236 0.768 0.906 0.303 0.531 0.433 0.594
INWB 114-104-022 1/4 3/8 0.472 0.236 0.768 0.965 0.323 0.531 0.433 0.750
INWB 114-516-020 5/16 1/8 0.591 0.157 0.945 0.874 0.217 0.650 0.551 0.500
INWB 114-516-021 5/16 1/4 0.591 0.236 0.945 0.886 0.303 0.650 0.551 0.594
INWB 114-308-020 3/8 1/8 0.689 0.157 1.063 0.925 0.217 0.669 0.630 0.500
INWB 114-308-021 3/8 1/4 0.689 0.236 1.063 0.945 0.303 0.669 0.630 0.594
INWB 114-308-022 3/8 3/8 0.689 0.315 1.063 1.043 0.323 0.669 0.630 0.750
INWB 114-308-023 3/8 1/2 0.689 0.315 1.063 1.201 0.406 0.669 0.630 0.938
INWB 114-102-021 1/2 1/4 0.827 0.236 1.201 1.063 0.303 0.728 0.688 0.594
INWB 114-102-022 1/2 3/8 0.827 0.315 1.201 1.122 0.323 0.728 0.688 0.750
INWB 114-102-023 1/2 1/2 0.827 0.315 1.201 1.280 0.406 0.728 0.688 0.938
Dimensional Drawings - INWB114 Swivel Branch Tee/Inch TubeDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.5
ACCESSORIES
D
L
H
CH.
ØT
CH.1
L1
L2
F
D1
F
L2
DØT
H
L
CH.
CH.1
D1
L1
D
D2
F
L
L2
CH.
T
H
CH.1
NWB109ETube
Diameter (T)
Thread (F) D D1 L L1 L2 H CH. CH.1
NWB109E-004-000 4 1/8 10.0 4 16.5 34.5 5.5 12.5 9 13
NWB109E-004-001 4 1/4 10.0 4 16.5 35 7.7 12.5 9 15
NWB109E-006-000 6 1/8 12.0 4 19 37.5 5.5 13.5 11 13
NWB109E-006-001 6 1/4 12.0 6 19 38 7.7 13.5 11 15
NWB109E-008-000 8 1/8 15.0 4 23.5 42.5 5.5 16 14 13
NWB109E-008-001 8 1/4 15.0 6 23.5 42.5 7.7 16 14 15
NWB109E-008-002 8 3/8 15.0 8 23.5 45.2 8.2 16 14 19
NWB109E-010-001 10 1/4 17.5 6 26.5 46.5 7.7 17 15 15
NWB109E-010-002 10 3/8 17.5 8 26.5 49 8.2 17 14 19
NWB109E Extended Swivel Elbow/Metric Tube
NWB109Tube
Diameter (T)
Thread (F) D D1 L L1 L2 H CH. CH.1
NWB109-004-000 4 1/8 10.0 4 16.5 19.5 5.5 12.5 9 13
NWB109-004-001 4 1/4 10.0 4 16.5 20.0 7.7 12.5 9 15
NWB109-005-000 5 1/8 11.0 4 16.5 21.0 5.5 13.0 10 13
NWB109-005-001 5 1/4 11.0 4 16.5 21.5 7.7 13.0 10 15
NWB109-006-000 6 1/8 12.0 4 19.0 20.5 5.5 13.5 11 13
NWB109-006-001 6 1/4 12.0 4 19.0 21.0 7.7 13.5 11 15
NWB109-008-000 8 1/8 15.0 4 23.5 22.5 5.5 16.0 14 13
NWB109-008-001 8 1/4 15.0 6 23.5 23.0 7.7 16.0 14 15
NWB109-008-002 8 3/8 15.0 8 23.5 25.5 8.2 16.0 14 19
NWB109-010-001 10 1/4 17.5 6 26.5 23.7 7.7 17.0 16 15
NWB109-010-002 10 3/8 17.5 8 26.5 26.4 8.2 17.0 16 19
NWB109-010-003 10 1/2 17.5 8 26.5 30.5 11.8 16.8 16 19
NWB109-012-001 12 1/4 20.5 6 29.1 27.1 7.7 18.6 17 15
NWB109-012-002 12 3/8 20.5 8 29.1 28.5 8.2 18.6 17 19
NWB109-012-003 12 1/2 20.5 8 29.1 32.5 8.2 17.0 15 19
NWB109 Swivel Elbow/Metric Tube
NWB103Tube
Diameter (T)
Thread (F) D D2 L L2 H CH. CH.1
NWB103-004-000 4 1/8 10.0 12 17.5 5.5 12.5 10 3
NWB103-004-001 4 1/4 10.0 15 20.5 7.7 12.5 10 3
NWB103-005-000 5 1/8 11.0 12 18.5 5.5 13.0 11 3
NWB103-005-001 5 1/4 11.0 15 21.0 7.7 13.0 11 3
NWB103-006-000 6 1/8 12.0 14 19.0 5.5 13.5 12 4
NWB103-006-001 6 1/4 12.0 15 21.0 7.7 13.5 12 4
NWB103-008-000 8 1/8 15.0 16 23.5 5.5 16.0 15 5
NWB103-008-001 8 1/4 15.0 16 23.5 7.7 16.0 15 6
NWB103-008-002 8 3/8 15.0 19 24.5 8.2 16.0 15 6
NWB103-010-001 10 1/4 17.5 20 27.0 7.7 17.0 18 6
NWB103-010-002 10 3/8 17.5 20 25.0 8.2 17.0 18 7
NWB103-010-003 10 1/2 17.5 24 28.5 10.3 17.0 18 7
NWB103-012-001 12 1/4 20.5 22 28.0 7.7 19.0 20 6
NWB103-012-002 12 3/8 20.5 22 28.5 8.2 19.0 20 8
NWB103-012-003 12 1/2 20.5 24 31.0 10.3 19.0 20 9
Dimensional Drawings - NWB103 Male Connector/Metric TubeDimensions: mm
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.6
ACCESSORIES
Dimensions: mm
L
T D
L
HSW.
F
L2
SW1
D1
L1
SW. H
L
T
D
L2
SW1
L1
L
D1F
NWB116Tube
Diameter (T)
Thread (F) D D1 L L1 L2 H SW SW1
NWB116-004-000 4 1/8 10.0 4 16.5 19.5 5.5 12.5 9 13
NWB116-005-000 5 1/8 11.0 4 16.5 19.6 5.5 13.0 10 13
NWB116-006-000 6 1/8 12.0 4 19.0 22.3 5.5 13.5 11 13
NWB116-006-001 6 1/4 12.0 6 19.0 23.6 7.7 13.5 11 15
NWB116-008-000 8 1/8 15.0 4 23.2 22.3 5.5 16.0 14 13
NWB116-008-001 8 1/4 15.0 6 23.2 22.5 7.7 16.0 14 15
NWB116-008-002 8 3/8 15.0 8 23.4 25.2 8.2 16.0 14 19
NWB116-010-001 10 1/4 17.5 6 26.5 23.7 7.7 17.0 15 15
NWB116-010-002 10 3/8 17.5 8 26.5 26.4 8.2 17.0 15 19
NWB116-010-003 10 1/2 17.5 8 26.5 26.5 8.2 16.8 16 19
NWB116-012-001 12 1/4 20.5 6 29.1 27.1 7.7 17.0 15 15
NWB116-012-002 12 3/8 20.5 8 29.1 28.5 8.2 17.0 15 19
NWB116-012-003 12 1/2 20.5 8 29.1 32.5 8.2 17.0 15 19
NWB116 Swivel Run Tee/Metric Tube
NWB114Tube
Diameter (T)
Thread (F) D D1 L L1 L2 H SW SW1
NWB114-004-000 4 1/8 10.0 4 16.5 19.5 5.5 12.5 9 13
NWB114-005-000 5 1/8 11.0 4 16.5 21.0 5.5 13.0 10 13
NWB114-006-000 6 1/8 12.0 4 19.0 22.7 5.5 13.5 11 13
NWB114-006-001 6 1/4 12.0 6 19.0 23.6 7.7 13.5 11 15
NWB114-008-000 8 1/8 15.0 4 23.5 22.3 5.5 16.0 14 13
NWB114-008-001 8 1/4 15.0 6 23.5 22.5 7.7 16.0 14 15
NWB114-008-002 8 3/8 15.0 8 23.5 25.2 8.2 16.0 14 19
NWB114-010-001 10 1/4 17.5 6 26.5 23.7 7.7 17.0 15 15
NWB114-010-002 10 3/8 17.5 8 26.5 28.5 8.2 17.0 15 19
NWB114-010-003 10 1/2 17.5 8 26.5 26.5 8.2 16.8 16 19
NWB114-012-001 12 1/4 20.5 6 29.1 27.1 7.7 17.0 15 15
NWB114-012-002 12 3/8 20.5 8 29.1 28.5 8.2 17.0 15 19
NWB114-012-003 12 1/2 20.5 8 29.1 32.5 8.2 17.0 15 19
Dimensional Drawings - NWB114 Swivel Branch Tee/Metric Tube
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.7
ACCESSORIES
Bushing for Swivel (Brass)
O-ring (Buna-N, FKM available)
Stop Bushing (Brass)
Lead Bushing (Brass)
Locking Ring (Stainless Steel)
Release Ring (Brass)
Housing (Brass, Nickel-plated)
• Pressure Rating to 265 psi• Temperature Range:
-20 °F to 176 °F (Buna-N O-ring) -20 °F to 230 °F (FKM O-ring)
• Push-in fittings with NPTF threads• PTFE thread sealant• Tube Diameter: 1/8" to 1/2"• Thread Size: 10-32 UNF to 1/2 NPTF
1 These fittings are only available in IN Fitting Series. All other styles are only available in INB Fitting Series.
2 See Fitting Style Charts on pages 8 – 13 for available Tube and Thread Configurations.
Tube Size108 = 1/8"532 = 5/32"104 = 1/4"516 = 5/16"308 = 3/8"102 = 1/2"000 = No Tube
2
Thread Size000 = No Thread0036 = 10-31 UNF020 = 1/8 NPTF021 = 1/4 NPTF022 = 3/8 NPTF023 = 1/2 NPTF
Options(blank) = Buna-N O-ringF = FKM O-ring
Fitting Style100 = Union101 = Bulkhead Union103 = Male Connector105 = Female Connector106 = Union Elbow107 = Fixed Elbow109 = Swivel Elbow109E = Extended Swivel Elbow110 = Union Tee114 = Swivel Branch Tee116 = Swivel Run Tee
118 = Plug119 = Double Male Union120 = Stem Adapter121 = Reducer122 = Single Banjo123 = Double Banjo124 = Single Manifold125 = Double Manifold131 = Union Y132 = Male Y
1
1
1
1
1
Fitting SeriesINB = NPTF/Inch Tube (Brass Release Ring)IN = NPTF/Inch Tube1
INB 109 104 022
How to OrderNPTF/Inch Tube Fittings
NPTF/INCH TUBE FITTINGS
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.9
ACCESSORIES
Brass Release Ring INB109
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW SW1
INB 109-108-036 1/8 10-32 UNF 0.394 0.087 0.638 0.630 0.165 0.472 0.354 0.354INB 109-108-020 1/8 1/8 NPTF 0.394 0.157 0.638 0.874 0.374 0.472 0.354 0.512INB 109-108-021 1/8 1/4 NPTF 0.394 0.157 0.638 1.008 0.512 0.472 0.354 0.591INB 109-532-036 5/32 10-32 UNF 0.394 0.087 0.657 0.630 0.165 0.492 0.354 0.354INB 109-532-020 5/32 1/8 NPTF 0.394 0.157 1.657 0.874 0.374 0.492 0.354 0.512INB 109-532-021 5/32 1/4 NPTF 0.394 0.157 1.657 1.008 0.512 0.492 0.354 0.591INB 109-104-036 1/4 10-32 UNF 0.472 0.087 0.740 0.709 0.165 0.531 0.433 0.354INB 109-104-020 1/4 1/8 NPTF 0.472 0.157 0.740 0.906 0.374 0.531 0.433 0.512INB 109-104-021 1/4 1/4 NPTF 0.472 0.236 0.740 1.031 0.512 0.531 0.433 0.591INB 109-104-022 1/4 3/8 NPTF 0.472 0.236 0.740 1.071 0.512 0.531 0.433 0.709INB 109-516-020 5/16 1/8 NPTF 0.591 0.157 0.925 0.984 0.374 0.630 0.551 0.512INB 109-516-021 5/16 1/4 NPTF 0.591 0.236 0.925 1.122 0.512 0.630 0.551 0.591INB 109-516-022 5/16 3/8 NPTF 0.591 0.315 0.925 1.181 0.512 0.630 0.551 0.709INB 109-308-020 3/8 1/8 NPTF 0.709 0.157 1.043 1.043 0.374 0.669 0.630 0.512INB 109-308-021 3/8 1/4 NPTF 0.709 0.236 1.043 1.181 0.512 0.669 0.630 0.591INB 109-308-022 3/8 3/8 NPTF 0.709 0.315 1.043 1.220 0.512 0.669 0.630 0.709INB 109-308-023 3/8 1/2 NPTF 0.709 0.315 1.043 1.358 0.709 0.669 0.630 0.866INB 109-102-021 1/2 1/4 NPTF 0.827 0.236 1.181 1.299 0.512 0.748 0.685 0.591INB 109-102-022 1/2 3/8 NPTF 0.827 0.315 1.181 1.299 0.512 0.748 0.685 0.709INB 109-102-023 1/2 1/2 NPTF 0.827 0.315 1.181 1.476 0.709 0.748 0.685 0.866
INB109 Swivel Elbow
Brass Release Ring INB107
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW
INB 107-532-020 5/32 1/8 NPTF 0.394 0.118 0.657 0.650 0.374 0.492 0.354
INB 107-532-021 5/32 1/4 NPTF 0.394 0.118 0.657 0.787 0.512 0.492 0.354
INB 107-104-020 1/4 1/8 NPTF 0.472 0.157 0.740 0.693 0.374 0.531 0.433
INB 107-104-021 1/4 1/4 NPTF 0.472 0.157 0.740 0.831 0.512 0.531 0.433
INB 107-308-021 3/8 1/4 NPTF 0.709 0.295 1.004 0.945 0.512 0.685 0.630
INB 107-308-022 3/8 3/8 NPTF 0.709 0.295 1.004 1.945 0.512 0.685 0.630
INB107 Fixed Elbow
Brass Release Ring INB106
Tube Diameter
(T)D D1 L H SW
INB 106-108-000 1/8 0.394 0.094 0.638 0.472 0.354
INB 106-532-000 5/32 0.394 0.118 0.657 0.492 0.354
INB 106-104-000 1/4 0.472 0.157 0.740 0.531 0.433
INB 106-516-000 5/16 0.591 0.236 0.858 0.630 0.551
INB 106-308-000 3/8 0.709 0.295 1.004 0.669 0.630
INB 106-102-000 1/2 0.827 0.413 1.161 0.748 0.685
Dimensional Drawings - INB106 Union ElbowDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.10
ACCESSORIES
F
L2
DT
H
L
SW
SW1
D1
L1
Brass Release Ring INB114
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW SW1
INB 114-108-036 1/8 10-32 UNF 0.394 0.087 0.638 0.630 0.165 0.472 0.354 0.354
INB 114-108-020 1/8 1/8 NPTF 0.394 0.157 0.638 0.874 0.374 0.472 0.354 0.512
INB 114-108-021 1/8 1/4 NPTF 0.394 0.157 0.638 1.008 0.512 0.472 0.354 0.591
INB 114-532-036 5/32 10-32 UNF 0.394 0.087 0.657 0.630 0.165 0.492 0.354 0.354
INB 114-532-020 5/32 1/8 NPTF 0.394 0.157 0.657 0.874 0.374 0.492 0.354 0.512
INB 114-532-021 5/32 1/4 NPTF 0.394 0.157 0.657 1.008 0.512 0.492 0.354 0.591
INB 114-104-020 1/4 1/8 NPTF 0.472 0.157 0.740 0.996 0.374 0.531 0.433 0.512
INB 114-104-021 1/4 1/4 NPTF 0.472 0.236 0.740 1.142 0.512 0.531 0.433 0.591
INB 114-104-022 1/4 3/8 NPTF 0.472 0.236 0.740 1.181 0.512 0.531 0.433 0.709
INB 114-516-020 5/16 1/8 NPTF 0.591 0.157 0.925 0.984 0.374 0.630 0.551 0.512
INB 114-516-021 5/16 1/4 NPTF 0.591 0.236 0.925 1.122 0.512 0.630 0.551 0.591
INB 114-308-020 3/8 1/8 NPTF 0.709 0.157 1.043 1.043 0.374 0.669 0.630 0.709
INB 114-308-021 3/8 1/4 NPTF 0.709 0.236 1.043 1.181 0.512 0.669 0.630 0.591
INB 114-308-022 3/8 3/8 NPTF 0.709 0.315 1.043 1.220 0.512 0.699 0.630 0.709
INB 114-308-023 3/8 1/2 NPTF 0.709 0.315 1.043 1.394 0.709 0.699 0.630 0.866
INB 114-102-021 1/2 1/4 NPTF 0.827 0.236 1.181 1.299 0.512 0.748 0.685 0.591
INB 114-102-022 1/2 3/8 NPTF 0.827 0.315 1.181 1.299 0.512 0.748 0.685 0.709
INB 114-102-023 1/2 1/2 NPTF 0.827 0.315 1.181 1.476 0.709 0.748 0.685 0.866
INB114 Swivel Branch Tee
Brass Release Ring INB110
Tube Diameter
(T)D D1 L H SW
INB 110-108-000 1/8 0.394 0.094 0.638 0.472 0.354
INB 110-532-000 5/32 0.394 0.118 0.657 0.492 0.354
INB 110-104-000 1/4 0.472 0.157 0.740 0.531 0.433
INB 110-516-000 5/16 0.591 0.236 0.858 0.630 0.551
INB 110-308-000 3/8 0.709 0.295 1.004 0.669 0.630
INB 110-102-000 1/2 0.827 0.413 1.161 0.748 0.685
INB110 Union Tee
Brass Release Ring INB109E
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW SW1
INB 109E-108-020 1/8 1/8 NPTF 0.394 0.157 0.638 1.461 0.374 0.472 0.354 0.512
INB 109E-108-021 1/8 1/4 NPTF 0.394 0.157 0.638 1.598 0.512 0.472 0.354 0.591
INB 109E-532-020 5/32 1/8 NPTF 0.394 0.157 0.657 1.457 0.374 0.492 0.354 0.512
INB 109E-104-020 1/4 1/8 NPTF 0.472 0.157 0.740 1.575 0.374 0.531 0.433 0.512
INB 109E-104-021 1/4 1/4 NPTF 0.472 0.236 0.740 1.693 0.512 0.531 0.433 0.591
INB 109E-104-022 1/4 3/8 NPTF 0.472 0.236 0.740 1.732 0.512 0.531 0.433 0.709
INB 109E-516-021 5/16 1/4 NPTF 0.591 0.236 0.925 1.909 0.512 0.531 0.551 0.591
INB 109E-308-020 3/8 1/8 NPTF 0.669 0.157 1.043 1.929 0.374 0.531 0.591 0.512
INB 109E-308-021 3/8 1/4 NPTF 0.709 0.236 1.043 2.067 0.512 0.531 0.591 0.591
INB 109E-308-022 3/8 3/8 NPTF 0.748 0.315 1.043 2.106 0.512 0.531 0.591 0.709
Dimensional Drawings - INB109E Extended Swivel ElbowDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.11
ACCESSORIES
IN119 T D L
IN119-108-000 1/8 0.063 1.102
IN119-532-000 5/32 0.079 1.181
IN119-104-000 1/4 0.157 1.260
IN119-516-000 5/16 0.236 1.535
IN119-308-000 3/8 0.295 1.614
IN119-102-000 1/2 0.394 1.811
IN119 Double Male Union
IN118 T D L
IN118-108-000 1/8 0.197 0.827
IN118-532-000 5/32 0.236 0.906
IN118-104-000 1/4 0.315 0.984
IN118-516-000 5/16 0.394 1.063
IN118-308-000 3/8 0.472 1.102
IN118-102-000 1/2 0.591 1.260
IN118 Plug
Brass Release Ring INB116
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H SW SW1
INB 116-108-036 1/8 10-32 UNF 0.394 0.087 0.638 0.630 0.165 0.472 0.354 0.354
INB 116-108-020 1/8 1/8 NPTF 0.394 0.157 0.638 0.874 0.374 0.472 0.354 0.512
INB 116-108-021 1/8 1/4 NPTF 0.394 0.157 0.638 1.008 0.512 0.472 0.354 0.591
INB 116-532-036 5/32 10-32 UNF 0.394 0.087 0.657 0.630 0.165 0.492 0.354 0.354
INB 116-532-020 5/32 1/8 NPTF 0.394 0.157 0.657 0.874 0.374 0.492 0.354 0.512
INB 116-532-021 5/32 1/4 NPTF 0.394 0.157 0.657 1.008 0.512 0.492 0.354 0.591
INB 116-104-020 1/4 1/8 NPTF 0.472 0.157 0.740 0.996 0.374 0.531 0.433 0.512
INB 116-104-021 1/4 1/4 NPTF 0.472 0.236 0.740 1.142 0.512 0.531 0.433 0.591
INB 116-104-022 1/4 3/8 NPTF 0.472 0.236 0.740 1.181 0.512 0.531 0.433 0.709
INB 116-516-020 5/16 1/8 NPTF 0.591 0.157 0.925 0.984 0.374 0.630 0.551 0.512
INB 116-516-021 5/16 1/4 NPTF 0.591 0.236 0.925 1.122 0.512 0.630 0.551 0.591
INB 116-308-020 3/8 1/8 NPTF 0.709 0.157 1.043 1.043 0.374 0.669 0.630 0.512
INB 116-308-021 3/8 1/4 NPTF 0.709 0.236 1.043 1.181 0.512 0.669 0.630 0.591
INB 116-308-022 3/8 3/8 NPTF 0.709 0.315 1.043 1.220 0.512 0.699 0.630 0.709
INB 116-308-023 3/8 1/2 NPTF 0.709 0.315 1.043 1.394 0.709 0.699 0.630 0.866
INB 116-102-021 1/2 1/4 NPTF 0.827 0.236 1.181 1.299 0.512 0.748 0.685 0.591
INB 116-102-022 1/2 3/8 NPTF 0.827 0.315 1.181 1.299 0.512 0.748 0.685 0.709
INB 116-102-023 1/2 1/2 NPTF 0.827 0.315 1.181 1.476 0.709 0.748 0.685 0.866
Dimensional Drawings - INB116 Swivel Run TeeDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.12
ACCESSORIES
Brass Release Ring INB123
Tube Diameter
(T)Thread
(F) D D1 L L1 H
INB 123-532-036 5/32 10-32 UNF 0.394 0.118 0.748 0.472 0.492INB 123-104-020 1/4 1/8 NPTF 0.472 0.157 0.811 0.571 0.531INB 123-104-021 1/4 1/4 NPTF 0.472 0.157 0.890 0.689 0.531INB 123-308-021 3/8 1/4 NPTF 0.709 0.295 1.067 0.709 0.669
INB123 Double Banjo
Brass Release Ring INB122
Tube Diameter
(T)Thread
(F) D D1 L L1 H
INB 122-532-036 5/32 10-32 UNF 0.394 0.110 0.748 0.472 0.492
INB 122-532-020 5/32 1/8 NPTF 0.394 0.118 0.795 0.571 0.492
INB 122-308-021 3/8 1/4 NPTF 0.709 0.295 1.067 0.709 0.669
INB122 Single Banjo
Brass Release Ring INB121 T T1 D D1 L H
INB 121-104-108 1/4 1/8 0.394 0.094 1.082 0.472
INB 121-104-532 1/4 5/32 0.394 0.118 1.142 0.492
INB 121-308-104 3/8 1/4 0.472 0.157 1.339 0.531
INB 121-102-104 1/2 1/4 0.472 0.157 1.417 0.531
INB 121-102-308 1/2 3/8 0.669 0.295 1.673 0.669
INB121 Reducer
IN120 T Thread (F) D1 L L1 L2 SW
IN120-108-020 1/8 1/8 NPTF 0.063 1.181 0.374 0.531 3/8
IN120-108-021 1/8 1/4 NPTF 0.063 1.358 0.512 0.531 1/2
IN120-532-020 5/32 1/8 NPTF 0.079 1.201 0.374 0.551 3/8
IN120-532-021 5/32 1/4 NPTF 0.079 1.378 0.512 0.551 1/2
IN120-104-020 1/4 1/8 NPTF 0.157 1.252 0.374 0.602 3/8
IN120-104-021 1/4 1/4 NPTF 0.157 1.429 0.512 0.602 1/2
IN120-516-020 5/16 1/8 NPTF 0.236 1.358 0.374 0.709 3/8
IN120-516-021 5/16 1/4 NPTF 0.236 1.535 0.512 0.709 1/2
IN120-308-021 3/8 1/4 NPTF 0.276 1.654 0.512 0.827 1/2
IN120-308-022 3/8 3/8 NPTF 0.276 1.673 0.512 0.827 19/32
IN120-102-022 1/2 3/8 NPTF 0.394 1.752 0.512 0.906 19/32
IN120-102-023 1/2 1/2 NPTF 0.394 1.949 0.709 0.906 11/16
Dimensional Drawings - IN120 Stem AdapterDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.13
ACCESSORIES
Brass Release Ring INB132
Tube Diameter
(T)Thread
(F) D D1 L L1 L2 H
INB 132-108-020 1/8 1/8 NPTF 0.394 0.094 1.339 0.512 0.374 0.472
INB 132-532-020 5/32 1/8 NPTF 0.394 0.118 1.350 0.512 0.374 0.492
INB 132-104-020 1/4 1/8 NPTF 0.394 0.094 1.319 0.512 0.165 0.472
INB132 Male Y
Brass Release Ring INB131
Tube Diameter
(T)D D1 L L1 H
INB 131-108-000 1/8 0.394 0.094 1.240 0.512 0.472
INB 131-532-000 1/8 0.394 0.118 1.280 0.512 0.492
INB 131-104-000 5/32 0.472 0.157 1.398 0.598 0.531
INB131 Union Y
IN125 Thread (F) D1 L L2 SW SW1
IN125-000-020 1/8 NPTF 0.197 2.187 0.374 0.551 0.551
IN125-000-021 1/4 NPTF 0.276 2.715 0.512 0.669 0.669
IN125 Double Manifold
IN124 Thread (F) D1 L L2 SW SW1
IN124-000-036 10-32 UNF 0.079 0.827 0.223 0.315 –
IN124-000-020 1/8 NPTF 0.197 1.634 0.374 0.551 0.551
IN124-000-021 1/4 NPTF 0.276 2.067 0.512 0.669 0.669
Dimensional Drawings - IN124 Single ManifoldDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.14
ACCESSORIES
O-ring (Buna-N)
O-ring (Buna-N)
Stop Bushing (Brass)
Locking Ring (Stainless Steel)
Lead Bushing (Brass)
Housing (Brass, Nickel-plated)
Release Ring (Brass)• Pressure Rating to 265 psi• Temperature Range:
-20 °F to 176 °F (Buna-N O-ring) -20 °F to 230 °F (FKM O-ring)
• Push-in fittings with G threads• Tube Diameter: 4mm to 12mm• Thread Size: M5 to 1/2 G
1 These fittings are only available in N Fitting Series. All other styles are only available in NB Fitting Series.
2 See Fitting Style Charts on pages 15 – 19 for available Tube and Thread Configurations.
Tube Size004 = 4mm005 = 5mm006 = 6mm008 = 8mm010 = 10mm012 = 12mm000 = No Tube
2
Thread Size000 = 1/8 G001 = 1/4 G002 = 3/8 G003 = 1/2 G005 = M5
Options(blank) = Buna-N O-ringF = FKM O-ring
Fitting Style100 = Union101 = Bulkhead Union102 = Male Connector104 = Male Connector w/o External Hex105 = Female Connector w/o External Box106 = Union Elbow108 = Swivel Elbow110 = Union Tee113 = Swivel Branch Tee
115 = Swivel Run Tee117 = Union Cross118 = Plug119 = Double Male Union120 = Stem Adapter121 = Reducer122 = Single Banjo123 = Double Banjo124 = Single Manifold125 = Double Manifold
1
1
1
1
1
Fitting SeriesNB = Metric (Brass Release Ring)N = Metric1
NB 102 006 001
How to OrderMetric Fittings
METRIC FITTINGS
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.15
ACCESSORIES
NB104Tube
Diameter (T)
Thread (G) D L L1 H SW1
NB104-004-005 4.0 M5 10.0 18.4 4.0 14.4 2
NB104-005-005 5.0 M5 11.0 18.7 4.0 14.7 2
NB104-006-005 6.0 M5 12.0 19.3 4.0 15.3 2
NB104 Male Connector without External Hex
NB102Tube
Diameter (T)
Thread (G) D D1 L L1 H SW SW1
NB102-004-000 4.0 1/8 14.0 9.9 18.1 5.7 12.2 10 3
NB102-004-001 4.0 1/4 17.0 9.9 18.8 6.0 12.2 10 3
NB102-005-000 5.0 1/8 14.0 10.9 18.8 5.7 12.7 11 3
NB102-005-001 5.0 1/4 17.0 10.9 19.2 6.0 12.7 11 3
NB102-006-000 6.0 1/8 14.0 11.9 19.0 5.7 13.3 12 4
NB102-006-001 6.0 1/4 17.0 11.9 19.8 6.0 13.3 12 4
NB102-008-000 8.0 1/8 17.0 15.0 24.5 5.7 15.8 15 6
NB102-008-001 8.0 1/4 19.0 15.0 22.0 6.0 15.8 16 6
NB102-008-002 8.0 3/8 21.0 15.0 22.7 6.5 15.8 16 6
NB102-010-001 10.0 1/4 20.0 17.4 25.3 6.0 16.8 18 7
NB102-010-002 10.0 3/8 22.0 17.4 23.3 6.5 16.8 18 7
NB102-010-003 10.0 1/2 26.0 17.4 28.3 9.5 16.8 18 7
NB102-012-001 12.0 1/4 22.0 20.0 27.4 6.0 18.9 20 7
NB102-012-002 12.0 3/8 22.0 20.0 28.0 6.0 18.9 20 7
NB102-012-003 12.0 1/2 26.0 20.0 31.5 9.5 18.9 20 9
NB102 Male Connector
NB101Tube
Diameter (T)
External Thread
(G)D1 L H Min. S Max. S SW
NB101-004-000 4.0 M11 2.0 28.7 12.2 0 6 14
NB101-005-000 5.0 M12 3.0 29.2 12.7 0 6 15
NB101-006-000 6.0 M13 4.0 31.6 13.3 0 8 16
NB101-008-000 8.0 M16 6.0 36.5 15.8 0 8 19
NB101-010-000 10.0 M19 8.0 41.6 16.8 0 11 22
NB101-012-000 12.0 M22 10.0 48.0 18.9 0 15 26
NB101 Bulkhead Union
NB100Tube
Diameter (T)
D D1 L H
NB100-004-000 4.0 10.0 2.0 26.0 12.2
NB100-005-000 5.0 11.0 3.0 27.0 12.7
NB100-006-000 6.0 12.0 4.0 28.0 13.3
NB100-008-000 8.0 15.0 6.0 33.0 15.8
NB100-010-000 10.0 18.0 8.0 35.5 16.8
NB100-012-000 12.0 20.0 10.0 41.0 18.9
Dimensional Drawings - NB100 UnionDimensions: mm
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.16
ACCESSORIES
NB108Tube
Diameter (T)
Thread (G) D D1 L L1 L2 H SW SW1
NB108-004-005 4.0 M5 9.9 2.3 16.6 16.5 4.0 12.2 9 9
NB108-004-000 4.0 1/8 9.9 4.0 16.6 19.8 5.7 12.2 9 13
NB108-004-001 4.0 1/4 9.9 4.0 16.6 20.0 6.0 12.2 9 15
NB108-005-005 5.0 M5 10.9 2.3 16.6 18.0 4.0 12.7 10 9
NB108-005-000 5.0 1/8 10.9 4.0 16.6 20.0 5.7 12.7 10 13
NB108-005-001 5.0 1/4 10.9 4.0 16.6 20.2 6.0 12.7 10 15
NB108-006-005 6.0 M5 11.9 2.3 19.1 18.5 4.0 13.3 11 9
NB108-006-000 6.0 1/8 11.9 4.0 19.1 20.9 5.7 13.3 11 13
NB108-006-001 6.0 1/4 11.9 6.0 19.1 21.0 6.0 13.3 11 15
NB108-008-000 8.0 1/8 15.0 4.0 23.3 22.7 5.7 15.8 14 13
NB108-008-001 8.0 1/4 15.0 6.0 23.3 22.7 6.0 15.8 14 15
NB108-008-002 8.0 3/8 15.0 8.0 23.3 25.2 6.5 15.8 14 18
NB108-010-000 10.0 1/8 17.4 4.0 26.5 24.0 5.7 16.8 16 13
NB108-010-001 10.0 1/4 17.4 6.0 26.5 24.1 6.0 16.8 16 15
NB108-010-002 10.0 3/8 17.4 8.0 26.5 26.4 6.5 16.8 16 18
NB108-010-003 10.0 1/2 17.4 8.0 26.5 30.4 9.5 16.8 16 18
NB108-012-001 12.0 1/4 20.0 6.0 29.1 27.3 6.0 18.9 17 15
NB108-012-002 12.0 3/8 20.0 8.0 29.1 29.5 6.5 18.9 17 18
NB108-012-003 12.0 1/2 20.0 8.0 29.1 33.5 9.5 18.9 17 18
NB108 Swivel Elbow
NB106Tube
Diameter (T)
D D1 L H SW
NB106-004-000 4.0 9.9 2.0 16.6 12.2 9
NB106-005-000 5.0 10.9 3.0 16.6 12.7 10
NB106-006-000 6.0 11.9 4.0 19.1 13.3 11
NB106-008-000 8.0 15.0 6.0 21.8 15.8 14
NB106-010-001 10.0 17.4 8.0 25.3 16.8 16
NB106-012-000 12.0 20.4 10.0 29.1 18.9 17
NB106 Union Elbow
NB105Tube
Diameter (T)
Thread (G) D D1 D2 L L1 H SW
NB105-004-005 4.0 M5 9.9 2.0 8.0 19.4 5.5 12.2 10
NB105-004-000 4.0 1/8 9.9 2.0 12.0 22.4 8.5 12.2 10
NB105-005-005 5.0 M5 10.9 3.0 8.0 19.7 5.5 12.7 11
NB105-005-001 5.0 1/4 10.9 3.0 17.0 24.7 10.5 12.7 11
NB105-006-000 6.0 1/8 11.9 4.0 12.0 23.3 8.5 13.3 12
NB105-006-001 6.0 1/4 11.9 4.0 17.0 25.3 10.5 13.3 12
NB105-008-000 8.0 1/8 15.0 6.0 12.0 25.8 8.5 15.8 15
NB105-008-001 8.0 1/4 15.0 6.0 17.0 28.3 10.5 15.8 15
NB105-010-001 10.0 1/4 17.4 8.0 17.0 29.3 10.5 16.8 18
NB105-010-002 10.0 3/8 17.4 8.0 20.0 30.3 11.5 16.8 18
NB105-012-001 12.0 1/4 20.0 10.0 22.0 32.0 10.5 18.9 20
NB105-012-002 12.0 3/8 20.0 10.0 22.0 33.0 11.5 18.9 20
NB102-012-003 12.0 1/2 20.0 10.0 26.0 37.4 16.0 18.9 20
Dimensional Drawings - NB105 Female Connector without External BoxDimensions: mm
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.17
ACCESSORIES
NB117Tube
Diameter (T)
D D1 L H SW
NB117-004-000 4.0 9.9 2.0 16.6 12.2 9
NB117-005-000 5.0 10.9 3.0 16.6 12.7 10
NB117-006-000 6.0 11.9 4.0 19.1 13.3 11
NB117-008-000 8.0 15.0 6.0 21.8 15.8 14
NB117-010-000 10.0 17.4 8.0 25.3 16.8 16
NB117-012-000 12.0 20.4 10.0 29.1 18.9 17
NB117 Union Cross
NB115Tube
Diameter (T)
Thread (G) D D1 L L1 L2 H SW SW1
NB115-004-000 4.0 1/8 9.9 4.0 16.6 19.8 5.7 12.2 9 13
NB115-005-000 5.0 1/8 10.9 4.0 16.6 20.0 5.7 12.7 10 13
NB115-006-000 6.0 1/8 11.9 4.0 19.1 20.9 5.7 13.3 11 13
NB115-006-001 6.0 1/4 11.9 6.0 19.1 21.5 6.0 13.3 11 15
NB115-008-000 8.0 1/8 15.0 4.0 23.3 22.7 5.7 15.8 14 13
NB115-008-001 8.0 1/4 15.0 6.0 23.3 22.7 6.0 15.8 14 15
NB115-008-002 8.0 3/8 15.0 8.0 23.3 25.2 6.5 15.8 14 18
NB115-010-001 10.0 1/4 17.4 6.0 26.5 24.1 6.0 16.8 16 15
NB115-010-002 10.0 3/8 17.4 8.0 26.5 26.4 6.5 16.8 16 18
NB115-010-003 10.0 1/2 17.4 8.0 26.5 30.4 9.5 16.8 16 18
NB115-012-002 12.0 3/8 20.0 8.0 29.1 29.5 6.5 18.9 17 18
NB115-012-003 12.0 1/2 20.0 8.0 29.1 33.5 9.5 18.9 17 18
NB115 Swivel Run Tee
NB113Tube
Diameter (T)
Thread (G) D D1 L L1 L2 H SW SW1
NB113-004-000 4.0 1/8 9.9 4.0 16.6 19.8 5.7 12.2 9 13
NB113-006-000 6.0 1/8 11.9 4.0 19.1 20.9 5.7 13.3 11 13
NB113-006-001 6.0 1/4 11.9 6.0 19.1 21.5 6.0 13.3 11 15
NB113-008-000 8.0 1/8 15.0 4.0 23.3 22.7 5.7 15.8 14 13
NB113-008-001 8.0 1/4 15.0 6.0 23.3 22.7 6.0 15.8 14 15
NB113-008-002 8.0 3/8 15.0 8.0 23.3 25.2 6.5 15.8 14 18
NB113-010-001 10.0 1/4 17.4 6.0 26.5 24.1 6.0 16.8 16 15
NB113-010-002 10.0 3/8 17.4 8.0 26.5 26.4 6.5 16.8 16 18
NB113-010-003 10.0 1/2 17.4 8.0 26.5 30.4 9.0 16.8 16 18
NB113-012-001 12.0 1/4 20.0 6.0 29.1 27.3 6.0 18.9 17 15
NB113-012-002 12.0 3/8 20.0 8.0 29.1 29.5 6.5 18.9 17 18
NB113-012-003 12.0 1/2 20.0 8.0 29.1 33.5 8.5 18.9 17 18
NB113 Swivel Branch Tee
NB110Tube
Diameter (T)
D D1 L H SW
NB110-004-000 4.0 9.9 2.0 16.6 12.2 9
NB110-005-000 5.0 10.9 3.0 16.6 12.7 10
NB110-006-000 6.0 11.9 4.0 19.1 13.3 11
NB110-008-000 8.0 15.0 6.0 21.8 15.8 14
NB110-010-000 10.0 17.4 8.0 25.3 16.8 16
NB110-012-000 12.0 20.4 10.0 29.1 18.9 17
Dimensional Drawings - NB110 Union TeeDimensions: mm
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.18
ACCESSORIES
NB121From Tube Diameter
(T)
To Tube Diameter
(T1)D D1 L H
NB121-005-000 5.0 4.0 10.0 3.0 28.2 12.2
NB121-006-000 6.0 4.0 10.0 3.0 29.2 12.2
NB121-006-001 6.0 5.0 11.0 3.0 29.6 12.7
NB121-008-000 8.0 4.0 10.0 2.0 32.2 12.2
NB121-008-001 8.0 5.0 11.0 3.0 32.5 12.7
NB121-008-002 8.0 6.0 12.0 4.0 33.1 13.3
NB121-010-002 10.0 6.0 12.0 4.0 25.9 13.3
NB121-010-003 10.0 8.0 15.0 6.0 38.3 15.8
NB121-012-002 12.0 6.0 12.0 4.0 36.3 13.3
NB121-012-003 12.0 8.0 15.0 6.0 40.3 15.8
NB121-012-004 12.0 10.0 18.0 8.0 42.8 16.8
NB121 Reducer
N120Tube
Diameter (T)
Thread (G) D L L1 L2 SW
N120-004-005 4.0 M5 2.0 23.0 4.0 14.0 9
N120-004-000 4.0 1/8 2.0 26.7 5.7 14.0 12
N120-004-001 4.0 1/4 2.0 27.0 6.0 14.0 15
N120-005-000 5.0 1/8 3.0 27.7 5.7 15.0 12
N120-006-005 6.0 M5 2.0 24.3 4.0 15.3 9
N120-006-000 6.0 1/8 4.0 28.0 5.7 15.3 12
N120-006-001 6.0 1/4 4.0 28.3 6.0 15.3 15
N120-008-000 8.0 1/8 6.0 30.7 5.7 18.0 12
N120-008-001 8.0 1/4 6.0 31.0 6.0 18.0 15
N120-010-001 10.0 1/4 8.0 34.0 6.0 21.0 15
N120-010-002 10.0 3/8 8.0 35.0 6.5 21.0 18
N120-010-003 10.0 1/2 8.0 40.0 9.5 21.0 18
N120-012-001 12.0 1/4 10.0 36.0 6.0 23.0 15
N120-012-003 12.0 1/2 10.0 42.0 9.5 23.0 18
N120 Stem Adapter
N119Tube
Diameter (T)
D L
N119-004-000 4.0 2.0 30.0
N119-006-000 6.0 4.0 32.0
N119-008-000 8.0 6.0 38.0
N119-010-000 10.0 8.0 41.0
N119-012-000 12.0 10.0 46.0
N119 Double Male Union
N118Tube
Diameter (T)
D L
N118-004-000 4.0 6.0 23.1
N118-005-000 5.0 7.0 25.1
N118-006-000 6.0 8.0 25.1
N118-008-000 8.0 10.0 27.1
N118-010-000 10.0 12.0 28.1
N118-012-000 12.0 14.0 32.0
Dimensional Drawings - N118 PlugDimensions: mm
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.19
ACCESSORIES
N125 Thread (G) L H H1 SW
N125-000-000 1/8 8.0 43.0 39.0 14
N125-000-001 1/4 11.0 45.5 41.0 17
N125 Double Manifold
N124 Thread (F) D1 L L2 SW SW1
N124-000-036 10-32 UNF 0.079 0.827 0.223 0.315 –
N124-004-000 1/8 NPTF 0.197 1.634 0.374 0.551 0.551
N124-000-001 1/4 NPTF 0.276 2.067 0.512 0.669 0.669
N124 Single Manifold
NB123Tube
Diameter (T)
For Banjo Bolts
(A)D D1 L L1 H
NB123-004-005 4.0 M5 10.0 2.0 19.0 12.0 12.2
NB123-004-000 4.0 1/8 10.0 2.0 20.2 14.5 12.2
NB123-006-005 6.0 M5 12.0 4.0 20.6 12.0 13.3
NB123-006-000 6.0 1/8 12.0 4.0 20.6 14.5 13.3
NB123-006-001 6.0 1/4 12.0 4.0 22.6 14.5 13.3
NB123-008-001 8.0 1/4 15.0 6.0 25.8 17.5 15.8
NB123 Double Banjo
NB122Tube
Diameter (T)
For Banjo Bolts
(A)D D1 L L1 H
NB122-004-000 4.0 1/8 10.0 2.0 20.2 14.5 12.2
NB122-006-005 6.0 M5 12.0 4.0 20.6 12.0 13.3
NB122-006-000 6.0 1/8 12.0 4.0 20.6 14.5 13.3
NB122-006-001 6.0 1/4 12.0 4.0 22.6 14.5 13.3
NB122-008-000 8.0 1/8 15.0 6.0 23.8 17.5 15.8
NB122-008-001 8.0 1/4 15.0 6.0 25.8 17.5 15.8
NB122-010-001 10.0 1/4 17.6 8.0 27.1 18.0 16.8
Dimensional Drawings - NB122 Single BanjoDimensions: mm
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.20
ACCESSORIES
CH. 2
CH. 1
TLc (C
lose)
Lo (O
pen)
H
G
L1
N
M
H
CH. 1L1
L
G
T
N
M
CH. 2
CH. 1
TLc (C
lose)
Lo (O
pen)
H
F
L1
N
M
H
CH. 1L1
L
F
T
N
M
NWB139CTube
Diameter (T)
Thread (G) Lc Lo L1 M N H CH.1 CH.2
NWB139C-004-020 4mm 1/8 54.5 61.0 4.9 20.5 24.0 6 14 7
NWB139C-006-020 6mm 1/8 54.5 61.0 4.9 21.0 24.0 6 14 7
NWB139C-006-021 6mm 1/4 50.0 54.5 7.2 23.0 23.2 7 17 9
NWB139C-008-021 8mm 1/4 50.0 54.5 7.2 26.5 23.2 7 17 9
NWB139C-010-021 10mm 1/4 50.0 54.5 7.2 27.5 23.2 7 17 9
NWB139C-008-022 8mm 3/8 56.8 60.3 7.6 28.0 26.0 8 20 11
NWB139C-010-022 10mm 3/8 56.8 60.3 7.6 29.5 26.0 8 20 11
NWB139C World Thread™ Flow Control with Knob/Metric Tube
NWB1391CTube
Diameter (T)
Thread (G) L L1 M N H CH.1
NWB1391C-004-020 4mm 1/8 42.4 4.9 20.5 24.0 6 14
NWB1391C-006-020 6mm 1/8 42.4 4.9 21.0 24.0 6 14
NWB1391C-006-021 6mm 1/4 37.5 7.2 23.0 23.2 7 17
NWB1391C-008-021 8mm 1/4 37.5 7.2 26.5 23.2 7 17
NWB1391C-010-021 10mm 1/4 37.5 7.2 27.5 23.2 7 17
NWB1391C-008-022 8mm 3/8 42.2 7.6 28.0 26.0 8 20
NWB1391C-010-022 10mm 3/8 42.2 7.6 29.5 26.0 8 20
Dimensional Drawings - NWB1391C World Thread™ Flow Control/Metric TubeDimensions: mm
Brass Release Ring INWB139C
Tube Diameter
(T)Thread
(F) Lc Lo L1 M N H CH.1 CH.2
INB 139C-108-020 1/8 1/8 54.5 61.0 4.9 20.5 24.0 6 14 7
INB 139C-532-020 5/32 1/8 54.5 61.0 4.9 21.0 24.0 6 14 7
INB 139C-104-020 1/4 1/8 54.5 61.0 4.9 21.5 24.0 6 14 7
INB 139C-104-021 1/4 1/4 50.0 54.5 7.2 23.0 23.2 7 17 9
INB 139C-516-021 5/16 1/4 50.0 54.5 7.2 26.0 23.2 7 17 9
INB 139C-308-021 3/8 1/4 50.0 54.5 7.2 27.5 23.2 7 17 9
INB 139C-516-022 5/16 3/8 56.8 60.3 7.6 28.0 26.0 8 20 11
INB 139C-308-022 3/8 3/8 56.8 60.3 7.6 29.5 26.0 8 20 11
INWB139C World Thread™ Flow Control with Knob/Inch Tube
Brass Release Ring INWB1391C
Tube Diameter
(T)Thread
(F) L L1 M N H CH.1
INB 1391C-108-020 1/8 1/8 42.4 4.9 20.5 24.0 6 14
INB 1391C-532-020 5/32 1/8 42.4 4.9 21.0 24.0 6 14
INB 1391C-104-020 1/4 1/8 42.4 4.9 21.5 24.0 6 14
INB 1391C-104-021 1/4 1/4 37.5 7.2 23.0 23.2 7 17
INB 1391C-516-021 5/16 1/4 37.5 7.2 26.0 23.2 7 17
INB 1391C-308-021 3/8 1/4 37.5 7.2 27.5 23.2 7 17
INB 1391C-516-022 5/16 3/8 42.2 7.6 28.0 26.0 8 20
INB 1391C-308-022 3/8 3/8 42.2 7.6 29.5 26.0 8 20
Dimensional Drawings - INWB1391C World Thread™ Flow Control/Inch TubeDimensions: inches
WORLD THREAD™ FLOW CONTROLS
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.21
ACCESSORIES
Brass ReleaseRing INB136C
Tube Diameter
(T)PortsNPTF D L MAX L1 L2 H SW SW1
INB 136C-108-036 1/8 10-32 0.394 0.945 0.748 0.217 0.472 0.315 –
INB 136C-108-020 1/8 1/8 0.394 1.665 0.748 0.374 0.472 0.551 0.551
INB 136C-532-036 5/32 10-32 0.394 0.945 0.748 0.217 0.492 0.315 –
INB 136C-532-020 5/32 1/8 0.394 1.673 0.795 0.374 0.492 0.551 0.551
INB 136C-104-020 1/4 1/8 0.472 1.673 0.881 0.374 0.531 0.551 0.551
INB 136C-104-021 1/4 1/4 0.472 2.126 0.890 0.512 0.531 0.669 0.669
INB 136C-308-021 3/8 1/4 0.709 2.126 1.067 0.512 0.669 0.669 0.669
INB 136C-308-022 3/8 3/8 0.709 2.333 1.220 0.512 0.669 0.748 0.866
INB136C Flow Control with Knob
Brass Release Ring INB135C
Tube Diameter
(T)PortsNPTF D L MAX L1 L2 H SW SW1
INB 135C-108-036 1/8 10-32 0.394 0.945 0.748 0.217 0.472 0.315 –
INB 135C-108-020 1/8 1/8 0.394 1.665 0.748 0.374 0.472 0.551 0.551
INB 135C-532-036 5/32 10-32 0.394 0.945 0.748 0.217 0.492 0.315 –
INB 135C-532-020 5/32 1/8 0.394 1.673 0.795 0.374 0.492 0.551 0.551
INB 135C-104-020 1/4 1/8 0.472 1.673 0.881 0.374 0.531 0.551 0.551
INB 135C-104-021 1/4 1/4 0.472 2.126 0.890 0.512 0.531 0.669 0.669
INB 135C-308-021 3/8 1/4 0.709 2.126 1.067 0.512 0.669 0.669 0.669
INB 135C-308-022 3/8 3/8 0.709 2.333 1.220 0.512 0.669 0.748 0.866
Dimensional Drawings - INB135C Flow ControlDimensions: inches
0 1 2 3 4 5 6 7 8 9 100
2
4
6
8
10
12
14
16
Turns of Adjustment
SCFM
@ 6
0 ps
i
1/4
1/8
10-32
0 1 2 3 4 5 6 7 8 9 100
5
10
15
20
25
30
35
40
Turns of AdjustmentSC
FM @
60
psi
3/8
FeaturesKnob adjust, Screwdriver adjustSpecificationsTemperature Range: 0 °F to 176 °F Maximum Operating Pressure: 265 psiMaterials of ConstructionBody: Brass, Nickel-plated Screw: Stainless Steel Seals: Buna-N Release Button: Oil or Brass Adjustment Needle: Brass
OEM Flow Controls
VALVES AND FLOW CONTROLS
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.22
ACCESSORIES
Metric Flow ControlsChange N to G in part number for BSPP thread or tube option. For example, change 0FCTN to 0FCTG or change 0FTPTN4 to 0FTPTG4.
How to Order
Ports NPTF Without Push-in
With Push-in
Tube Diameter
(Tube O.D.)A B C D
10-32 0FCTN 0FPTN40FPTN5
1/85/32 1.21 0.62 0.43 0.69
1/8 1FCTN 1FPTN81FPTN5
1/45/32 2.21 0.98 0.65 1.00
1/4 2FCTN 2FPTN82FPTN12
1/43/8 2.50 1.28 0.91 1.03
3/8 3FCTN 3FPTN123FPTN16
3/81/2 3.23 1.45 1.02 1.30
1/2 4FCTN 4FPTN124FPTN16
3/81/2 3.96 1.84 1.28 1.40
Knob Adjust Flow Control (with and without Push-in Fitting)
Ports NPTF Without Push-in
With Push-in
Tube Diameter
(Tube O.D.)A B C D
10-32 0FCRN 0FPRN40FPRN5
1/85/32 0.81 0.62 0.43 0.38
1/8 1FCRN 1FPRN81FPRN5
1/45/32 1.41 0.98 0.65 0.79
1/4 2FCRN 2FPRN82FPRN12
1/43/8 1.7 1.28 0.91 1.07
3/8 3FCRN 3FPRN123FPRN16
3/81/2 2.19 1.45 1.02 1.15
1/2 4FCRN 4FPRN124FPRN16
3/81/2 2.74 1.84 1.28 1.47
Dimensional Drawings - Standard Flow Control (with and without Push-in Fitting)
Dimensions: inches
0
5
10
15
20
25
30
35
0 2 4 6 8 10 12
Needle Rotations
Con
trolle
d Fl
ow (S
CFM
)
10-32
1/8
1/4
0
20
40
60
80
100
120
140
0 2 4 6 8 10 12
Needle Rotations
Con
trolle
d Fl
ow (S
CFM
)
1/2
3/8
FeaturesBody swivels 360°, provides accurate speed control in a compact size and eliminates need for fittingSpecificationsTemperature Range: 0 °F to 160 °F Maximum Operating Pressure: 175 psi (12 bar)Materials of ConstructionBody: Anodized Aluminum Cartridge: Nickel-plated Brass Screw: Stainless Steel Spring: Stainless Steel Seals: Buna-N
Flow Controls
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.23
ACCESSORIES
Ports NPTF
Without Bottom
Port
With Bottom
PortCv A B C
1/2 4FC3 4FC3B 6.0 3.28 1.50 3.17
3/4 5FC3 5FC3B 7.5 3.28 1.50 3.17
Ports NPTF
Without Bottom
Port
With Bottom
PortCv A B C
1/4 2FC2 2FC2B 2.3 2.34 1.06 2.21
3/8 3FC2 3FC2B 2.7 2.34 1.06 2.21
FC2 Inline Flow Control
Knob 123-121(Includes set screw)
Nut 128-161
Nut128-157
Optional Knurled Knob (suffix K)
Ports NPTF
Without Knurled
Knob
With Knurled
KnobCv A B C D
1/8 1FC1 1FC1K 0.22 1.50 0.75 1.08 1.66
1/4 2FC1 2FC1K 0.22 1.50 0.75 1.08 1.66
Dimensional Drawings - 1FC1 Inline Flow ControlDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.24
ACCESSORIES
12
1
2
Minimum signal pressure p12 to open the valve
Flow Characteristics
ThreadedBanjo
Part Number A B C Max. Tightening Torque D Pilot Port
NCPGG-020-020 1/8" NPTF SW13 1.164 7 Nm 5.1 lbs/ft 1/8" NPTF 10-32 UNF
NCPGG-021-021 1/4" NPTF SW17 1.890 15 Nm 11.0 lbs/ft 1/4" NPTF 10-32 UNF
NCPGG-022-022 3/8" NPTF SW22 2.165 20 Nm 14.7 lbs/ft 3/8" NPTF 1/8” NPTF
NCPGG-023-023 1/2" NPTF SW27 2.579 20 Nm 14.7 lbs/ft 1/2" NPTF 1/8” NPTF
• NPTF threads have thread sealant applied• Temperature Range: 15 ˚F to 160 ˚F• Operating Pressure Range: 15 psi to 150 psi
PILOT OPERATEDCHECK VALVES
Dimensional Drawings - Pilot Operated Check ValvesDimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.25
ACCESSORIES
0.85
1.65
2.32
4.24
1∨8 1∨4 3∨8 1∨2
5
4
3
2
1
0
NPTF
CV
Quick Exhaust
Port
Supply Port
Cylinder Port
Ports NPTF OA22-1 A B C D E F G
1/8 OA22-1 1.93 0.95 0.75 1.26 0.91 0.87 0.20
SpecificationsTemperature Range: -4 °F to 194 °F Pressure Range: 3.9 psi to 145 psi
OA22-1 Shuttle Valve
F NPTF IN530 D L SW
1/8 IN530-020-020 0.98 1.89 0.55
1/4 IN530-021-021 1.18 2.28 0.75
3/8 IN530-022-022 1.38 2.76 0.87
1/2 IN530-023-023 1.57 3.15 1.06
FeaturesThe IN530 Slide Valve allows easy isolation of downstream components by dumping circuit pressure.SpecificationsTemperature Range: 0 °F to 160 °F Maximum Operating Pressure: 150 PSIG (10 bar) Pipe Sizes: 1/8, 1/4, 3/8 1/2 NPTFMaterials of ConstructionSleeve: Aluminum Body: Chrome-plated Brass Seal: Buna-N Snap Ring: Steel
IN530 Slide Valve
Ports G Tap SEV_B A B C D E
1/8 SEV10B G1/8 33 28 42 14
1/4 SEV25B G1/4 40 33 52 18
1/2 SEV50B G1/2 55 43 71 27
3/4 SEV75B G3/4 74 64 90 42
1 SEV100B G1 88 80 108 48NOTE: Service parts are available, please consult the factory.
Ports NPTF SEV_BN A B C D E
1/8 SEV10BN 1/8 1.30 1.10 1.65 0.55
1/4 SEV25BN 1/4 1.58 1.30 2.05 0.71
3/8 SEV38BN 3/8 1.70 1.30 2.16 0.75
1/2 SEV50BN 1/2 2.17 1.69 2.80 1.06
3/4 SEV75BN 3/4 2.45 1.93 3.55 1.42
SpecificationsQuick exhaust valve, line mounting Temperature Range: -40° °F to 165 °F Pressure Range: 3.9 psi to 145 psi
Dimensional Drawings - SEV Quick Exhaust ValveDimensions: inches
QUICK EXHAUST, SLIDE, AND
SHUTTLE VALVES
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.26
ACCESSORIES
ANSI SymbolApplication
The SSM Series Muffler is constructed with 300 Series stainless steel. Resistance to atmospheric corrosion, sterilizing solutions, organic chemicals, and many inorganic chemicals makes this a terrific product for dairy and food plants. The SSM Series Muffler softly exhausts air and disperses it over a 360° pattern. Because of its heavy-duty construction, it can withstand shock and continuous cycling.
NPTF Male DimensionsModel NPTF Cv A B C
SSM1MN 1/8 1.17 1.38 (34.9) 1.22 (31.0) 0.44 (11.1)
SSM2MN 1/4 2.54 1.75 (44.5) 1.53 (38.9) 0.56 (14.3)
SSM3MN 3/8 5.08 2.25 (57.2) 2.00 (50.8) 0.69 (17.5)
SSM4MN 1/2 7.32 2.72 (69.1) 2.41 (61.1) 0.88 (22.2)
SSM5MN 3/4 13.87 3.16 (80.2) 2.81 (71.4) 1.06 (27.0)
SSM6MN 1 19.53 3.88 (98.4) 3.47 (88.1) 1.31 (33.3)
SSM Series Stainless Steel Air Silencers
ApplicationThe M Series Muffler softly exhausts air and disperses it over a 360º pattern. Constructed of a corrosion resistant metal, it can withstand shock and continuous, heavy-duty use under many conditions. This muffler is ideal for use on the 22/32 Series Solenoid Soft Start Quick Exhaust Valve, Lockout Valves, Valve Exhaust Ports, Single Acting Cylinders, and many other applications.
ANSI Symbol
BSPT Male DimensionsModel BSPT Cv A B C
M1MB 1/8 1.17 1.38 (34.9) 1.22 (31.0) 0.44 (11.1)
M2MB 1/4 2.54 1.75 (44.5) 1.53 (38.9) 0.56 (14.3)
M3MB 3/8 5.08 2.25 (57.2) 2.00 (50.8) 0.69 (17.5)
M4MB 1/2 7.32 2.72 (69.1) 2.41 (61.1) 0.88 (22.2)
M5MB 3/4 13.87 3.16 (80.2) 2.81 (71.4) 1.06 (27.0)
M6MB 1 19.53 3.88 (98.4) 3.47 (88.1) 1.31 (33.3)
NPTF Female DimensionsModel NPTF Cv A B C
M1FN 1/8 1.17 1.38 (34.9) 1.22 (31.0) 0.50 (12.7)
M2FN 1/4 2.54 1.75 (44.5) 1.53 (38.9) 0.62 (15.9)
M3FN 3/8 5.08 2.25 (57.2) 2.00 (50.8) 0.75 (19.1)
M4FN 1/2 7.32 2.72 (69.1) 2.41 (61.1) 0.94 (23.8)
NPTF Male DimensionsModel NPTF Cv A B C
M1MN 1/8 1.17 1.38 (34.9) 1.22 (31.0) 0.44 (11.1)
M2MN 1/4 2.54 1.75 (44.5) 1.53 (38.9) 0.56 (14.3)
M3MN 3/8 5.08 2.25 (57.2) 2.00 (50.8) 0.69 (17.5)
M4MN 1/2 7.32 2.72 (69.1) 2.41 (61.1) 0.88 (22.2)
M5MN 3/4 13.87 3.16 (80.2) 2.81 (71.4) 1.06 (27.0)
M6MN 1 19.53 3.88 (98.4) 3.47 (88.1) 1.31 (33.3)
M7MN 1-1/4 28.32 4.50 (114.3) 4.16 (105.6) 1.69 (42.9)
M8MN 1-1/2 38.09 5.00 (127.0) 4.59 (116.7) 2.00 (50.8)
M9MN 2 52.73 5.50 (139.7) 5.06 (128.6) 2.38 (60.3)
Dimensional Drawings - M Series Metal Air SilencersDimensions: inches (mm)
SILENCERS
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.27
ACCESSORIES
ANSI Symbol
ApplicationCombining a sturdy nylon thread with a polyethylene body, the E Series Silencer gives a low-cost, lightweight alternative to heavier, metal-based mufflers while reducing decibel levels to an OSHA-approved level. It is perfect for robotic arm applications, low-traffic or enclosed areas, or where cost is of primary concern.
NPTF Male DimensionsModel NPTF A B C
E1MN 1/8 0.49 (12.5) 1.1 (28.3) 1.3 (34.0)
E2MN 1/4 0.61 (15.5) 1.4 (35.5) 1.7 (42.5)
E3MN 3/8 0.73 (18.5) 2.2 (56.0) 2.7 (67.5)
E4MN 1/2 0.93 (23.5) 2.6 (67.0) 3.1 (78.0)
E5MN 3/4 1.50 (38.5) 4.9 (123.5) 5.5 (140.0)
E6MN 1 1.90 (49.0) 5.5 (140.5) 6.3 (160.0)
E Series Polyethylene Air Silencers
ANSI Symbol
ApplicationThe P Series Muffler is perfect for limited space applications due to its compact size. This silencer can be used to muffle air valve exhaust noise, intake filtration, coalescing of oil mist exhaust, pressure or vacuum equalization, or on any other liquid vapor.
BSPT Male DimensionsModel BSPT Cv A B C
P1MB 1/8 1.07 0.84 (21.3) 0.69 (17.5) 0.44 (11.1)
P2MB 1/4 1.78 1.20 (30.5) 0.97 (24.6) 0.56 (14.3)
P3MB 3/8 2.30 1.45 (36.8) 1.20 (30.5) 0.69 (17.5)
P4MB 1/2 5.66 1.89 (48.0) 1.58 (40.1) 0.88 (22.2)
P5MB 3/4 9.67 2.12 (53.9) 1.78 (45.2) 1.06 (27.0)
P6MB 1 14.06 2.84 (72.1) 2.44 (62.0) 1.31 (33.3)
NPTF Male DimensionsModel NPTF Cv A B C
P0MN 10-32 0.23 0.75 (19.1) 0.62 (15.7) 0.38 (9.5)
P1MN 1/8 1.07 0.84 (21.4) 0.69 (17.5) 0.44 (11.1)
P2MN 1/4 1.78 1.20 (30.6) 0.97 (24.6) 0.56 (14.3)
P3MN 3/8 2.30 1.45 (36.7) 1.20 (30.6) 0.69 (17.5)
P4MN 1/2 5.66 1.89 (48.0) 1.58 (40.1) 0.88 (22.2)
P5MN 3/4 9.67 2.12 (54.0) 1.78 (45.2) 1.06 (27.0)
P6MN 1 14.06 2.84 (72.2) 2.44 (61.9) 1.31 (33.3)
P7MN 1-1/4 20.51 3.44 (87.3) 3.00 (76.2) 1.69 (42.9)
P8MN 1-1/2 29.10 4.00 (101.6) 3.56 (90.5) 2.00 (50.8)
P9MN 2 44.92 4.75 (120.7) 4.31 (109.5) 2.38 (60.3)
Dimensional Drawings - P Series Porous Bronze Air SilencersDimensions: inches (mm)
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.28
ACCESSORIES
ANSI Symbol
ApplicationThe Polyethylene Speed Control Muffler is designed to give fine adjustment to the low end of the flow range, followed by more coarse control as flow is increased toward the maximum. The body is made of highly versatile and cost-effective nylon. The adjusting screw is made of high tensile steel and is coated with electroplated zinc. The S Series Muffler reduces decibel levels to an OSHA-approved level.
Model SelectionPort Size
Models NPT A B C D E F G
M5 S0MN 0.52 (13.2)
0.36 (9.1)
0.36 (9.1) M5 0.05
(1.3)3.10
(78.7)0.30 (7.6)
1/8 S1MN 0.69 (17.5)
0.49 (12.4)
0.16 (4.1)
1/8 NPT
0.08 (2.0)
5.10 (129.5)
0.49 (12.4)
1/4 S2MN 0.95 (24.1)
0.72 (18.3)
0.23 (5.8)
1/4 NPT
0.13 (3.3)
5.90 (150.0)
0.59 (15.0)
3/8 S3MN 1.20 (30.5)
0.98 (24.9)
0.36 (9.1)
3/8 NPT
0.20 (5.1)
7.90 (200.7)
0.79 (20.1)
1/2 S4MN 1.60 (40.6)
1.30 (33.0)
0.49 (12.4)
1/2 NPT
0.26 (6.6)
8.40 (213.4)
0.98 (24.9)
Polyethylene Speed Control Muffler
ANSI Symbol
ApplicationThe Numatics Bronze Speed Control Muffler provides infinite metering of air flow. The sintered bronze is encased by an outer metal shroud. With linear adjusting capability, the speed of the cylinder can be decreased by adjusting the integrated screw. When optimal exhaust rate is reached, the locknut may be adjusted to prevent accidental adjustments due to vibration or other means. Maximum Operating Pressure: 300 psi; Temperature Range: 35 ºF to 300 ºF (1.7 ºC to 149 ºC).
Model SelectionPort Size Models NPT Cv A B C
1/8 A1MN 0.35 1.12 (28.4) 1.31 (33.3) 0.50 (12.7)
1/4 A2MN 0.67 1.42 (36.1) 1.56 (39.6) 0.63 (16.0)
3/8 A3MN 0.90 1.47 (37.3) 1.63 (41.4) 0.69 (17.5)
1/2 A4MN 1.35 1.75 (44.5) 2.00 (50.8) 0.88 (22.4)
3/4 A5MN 1.67 2.00 (50.8) 2.38 (60.5) 1.06 (27.0)
1 A6MN 2.32 2.25 (57.2) 2.50 (63.5) 1.31 (33.3)
Dimensional Drawings - Bronze Speed Control Muffler
MUFFLERS
Dimensions: inches (mm)
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.29
ACCESSORIES
ApplicationIdeal for air, oil, or water, the C Series Inlet Filter Strainer is compact and lightweight–perfect for point-of-use application. It features a brass fitting which contains a cone-shaped, sintered bronze, 40 micron filter. It is used as a prefilter, which eliminates bulk contamination from air lines, extending the life of filter elements and other downstream components.
Model SelectionPort Size Models NPT Cv A B
1/8 C1MN 0.31 1.25 (31.8) 0.43 (10.9)
1/4 C2MN 0.78 1.50 (38.1) 0.56 (14.2)
3/8 C3MN 1.0 1.75 (44.5) 0.69 (17.5)
1/2 C4MN 2.0 2.00 (50.8) 0.88 (22.4)
C Series Inlet Filter Strainer
ANSI Symbol
ApplicationThe Breather Vent Silencer offers some noise reduction, but is better suited for keeping contaminant out of valve exhaust ports, single-acting cylinder ports, or any other threaded port open to atmosphere which needs flow relief. It is also used on gear boxes, storage tanks, or wherever pressure equalization is needed. The Breather Vent Silencer is compact and inexpensive. Maximum Operating Pressure: 150 psi; Temperature Range: 35 ºF to 300 ºF (1.7 ºC to 149 ºC).
Model SelectionPort Size
ModelsCv A B
NPT BSPT
1/8 B1MN B1MB 0.44 0.44 (11.2) 0.44 (11.2)
1/4 B2MN B2MB 0.65 0.63 (16.0) 0.56 (14.2)
3/8 B3MN B3MB 1.12 0.75 (19.1) 0.68 (17.3)
1/2 B4MN B4MB 1.77 0.88 (22.4) 0.88 (22.4)
3/4 B5MN B5MB 4.72 1.00 (25.4) 1.06 (27.0)
1 B6MN B6MB 7.30 1.31 (33.3) 1.31 (33.3)
1-1/4 B7MN B7MB 10.63 1.41 (35.8) 1.68 (42.7)
1-1/2 B8MN B8MB 12.72 1.50 (38.1) 2.00 (50.8)
Dimensional Drawings - Breather Vent SilencerDimensions: inches (mm)
BREATHER VENT SILENCER AND INLET
FILTER STRAINER
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.30
ACCESSORIES
ANSI Symbol
ApplicationNumatics CV Series Check Valves are used in fluid systems to permit free flow of air in one direction and prevent the flow in the opposite direction. Each check valve is clearly marked with a direction arrow to prevent accidental misconnection.
SpecificationsOperating Temperature: 0 °F to 140 °F (5 °C to 60 °C)Operating Pressure: 3.5 PSIG to 213 PSIG (0.24 bar to 14.69 bar)Materials of ConstructionBody: Nickel-plated Brass Valve: Brass
Model SelectionPort Size Models NPT A B
1/8 CV1FN-A 1.57 9/16
1/4 CV2FN-A 1.97 11/16
3/8 CV3FN-A 2.28 3/4
1/2 CV4FN-A 2.6 1
Dimensional Drawings - CV Series Check Valves
CHECK VALVES
Dimensions: inches
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.31
ACCESSORIES
ColorCL = ClearBK = BlackRD = RedGN = GreenBU = BlueYW = Yellow
Length (in feet)1002505001000
MaterialE = Low Density PolyethyleneU = PolyurethaneN = NylonW = Weld Spatter Resistant
Tubing DiameterT = InchM = Metric
QR T N 12 GN 1000
How to OrderTubing
Tubing
Tube SizeInch12 = 1/8"16 = 5/32"19 = 3/16"25 = 1/4"31 = 5/16"38 = 3/8"50 = 1/2"
Metric04 = 4mm06 = 6mm08 = 8mm10 = 10mm12 = 12mm
L
HApplicationThis tool will cut all composite tubes (e.g. nylon, PTFE, polyurethane, braided polyethylene, soft rubber, etc.) from 1/8” to 1/2” diameter inclusive. It is designed to give a clean cut at right angles to tube axis. A spring maintains the cutter in the closed position.
Model Number Height(H)
Length(L)
QR3000 71 00 0.98 3.11
Dimensional Drawings - QR300071 Tube CutterDimensions: inches
TUBING
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.32
ACCESSORIES
ModelNumber
O.D.(in)
I.D.(in)
Tolerance Working Pressure (PSIG) Roll Length
(ft)Wall(in) O.D. I.D. @ 0 ºC @ 40 ºC @ 80 ºC @ 120 ºC @ 160 ºC @ 200 ºC
135-124 1/4 1/8 0.31 ±0.008 ±0.005 180 135 97 60 48 22 1000
135-125 1/4 1/8 0.31 ±0.008 ±0.005 180 135 97 60 48 22 100
135-127 1/8 1/16 0.15 ±0.005 ±0.005 180 135 97 60 48 22 1000
135-126 1/8 1/16 0.15 ±0.005 ±0.005 180 135 97 60 48 22 100
Specifications• Vacuum Rating: to 28 inHg• Temperature Range: 0 °C to 200 °C• Shore 83 A
ApplicationThis highly flexible tubing allows easy connection to “barbed” fittings with sharp bends possible in less than one inch. Many Numatrol® installations that previously required the use of nylon tubing for high pressure, clamp functions for example, can now be easily accomplished with this tubing.
FeaturesNumatrol® polyurethane tubing offers superior performance to other composite tubing with regard to kink resistance. Low temperature flexibility, higher working pressures, and resistance to ambient ozone oil, grease, fuels and most chemicals.
Polyurethane Tubing for Numatrol® Series
MetricModel
NumberO.D.(mm)
I.D.(mm)
Wall(mm)
Min. BendRadius (mm)
Working Pressure (PSIG) Weight(lbs/100ft)@ 75 ºF @ 100 ºF @125 ºF @ 150 ºF
QRMU04__ 4 2.4 0.8 9.5 176 130 106 88 0.7
QRMU06__ 6 4.0 1.0 12.7 145 107 87 73 1.3
QRMU08__ 8 5.0 1.5 19.1 155 115 93 78 2.6
QRMU10__ 10 6.5 1.75 22.2 149 110 89 75 3.9
QRMU12__ 12 8.0 2.0 28.6 133 98 80 67 5.3
InchModel
NumberO.D.(in)
I.D.(in)
Wall(in)
Min. BendRadius (in)
Working Pressure (PSIG) Weight(lbs/100ft)@ 75 ºF @ 100 ºF @125 ºF @ 150 ºF
QRTU12__ 1/8 0.066 0.030 1/4 233 172 140 117 0.5
QRTU16__ 5/32 0.093 0.031 3/8 176 130 106 88 0.7
QRTU19__ 3/16 0.107 0.040 3/8 150 111 90 75 1.0
QRTU25__ 1/4 0.160 0.045 1/2 148 110 89 74 1.5
QRTU31__ 5/16 0.216 0.048 3/4 133 98 80 67 3.9
QRTU38__ 3/8 0.245 0.065 7/8 147 109 88 74 3.4
QRTU50__ 1/2 0.375 0.090 1-1/8 140 104 84 70 5.1
Specifications• Vacuum Rating: to 28 inHg• Temperature Range: -40 °F to 165 °F• UV Stabilized• Shore 95 A• NSF61 Compliant• Meets UL94HB• Dimensional Tolerance
– Imperial ± 0.005in – Metric ± 0.127mm
ApplicationPolyurethane tubing is ideal for compressed air and vacuum systems. This rigid wall tubing is compatible with push-to-connect pneumatic fittings.
FeaturesHas excellent abrasion resistance and shape retention while working in high humidity and low temperatures. Withstands salt water, ages well, has good vibration absorption, and excellent tear resistance.
Polyurethane 95 Tubing
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.33
ACCESSORIES
MetricModel
NumberO.D.(mm)
I.D.(mm)
Wall(mm)
Min. BendRadius (mm)
Working Pressure (PSIG)
@ 75 ºF @ 100 ºF @125 ºF @ 150 ºF
QRMN04__ 4 2.7 0.6 12.7 350 263 228 210
QRMN06__ 6 4 1 17 340 255 221 200
QRMN08__ 8 6 1 38 250 187.5 162.5 150
QRMN10__ 10 8 1 51 190 142.5 123.5 110
QRMN12__ 12 10 1 76 150 112.5 97.5 90
InchModel
NumberO.D.(in)
I.D.(in)
Wall(in)
Min. BendRadius (in)
Working Pressure (PSIG)@ 75 ºF @ 100 ºF @125 ºF @ 150 ºF
QRTN12__ 1/8 0.093 0.017 3/8 225 168 133 125
QRTN16__ 5/32 0.106 0.025 1/2 275 200 169 160
QRTN19__ 3/16 0.138 0.024 5/8 225 158 120 113
QRTN25__ 1/4 0.180 0.035 1 250 183 160 140
QRTN31__ 5/16 0.232 0.040 1-1/4 220 170 141 121
QRTN38__ 3/8 0.275 0.050 1-1/2 220 165 148 128
QRTN50__ 1/2 0.375 0.062 2 200 145 133 125
Specifications• Temperature Range: -60 °F to 200 °F• Vacuum Rating: to 28 inHg• Diameter Tolerances: + 0.002", - 0.004"
Metric: + 0.051mm, - 0.1mm• Hardness: 78 Rockwell R• Working Pressure: 4:1 Safety Factor• UV Stabilized: Yes• Base Resin Compliance: Meets UL94HB
Testing Requirements• Recommended Fittings: Push-in, Compression
ApplicationFlexible nylon tubing used for air and lubrication lines, instrumentation and process lines for chemicals and solvents. Contact factory for specific applications.FeaturesHas excellent resistance to a wide range of chemicals including petroleum products, soaps, salt solutions, and bases.
Nylon 11 Tubing
MetricModel
NumberO.D.(mm)
I.D.(mm)
Wall(mm)
Min.Bend
Radius (mm)
Working Pressure (PSIG)
@ 75 ºF @ 150 ºF
QRME04 4 2.7 .65 25.2 175 70
QRME06 6 4 1 31.8 175 70
QRME08 8 6 1 38 140 55
QRME10 10 8 1 51 115 45
QRME12 12 9 1.5 63.5 135 55
InchModel
NumberO.D.(in)
I.D.(in)
Wall(in)
Min.Bend
Radius (in)
Working Pressure (PSIG)
@ 75 ºF @ 150 ºF
QRTE12 1/8 0.062 0.031 1/2 305 120
QRTE16 5/32 0.106 0.025 1 175 70
QRTE25 1/4 0.170 0.040 1-1/4 200 80
QRTE31 5/16 0.187 0.062 1-1/2 230 90
QRTE38 3/8 0.250 0.062 2 190 75
QRTE50 1/2 0.375 0.062 2-1/2 135 55
Specifications• Temperature Range: All Diameters: -40 °F to 150 °F• Vacuum Rating: to 28 inHg• Diameter Tolerances: + 0.004"• Hardness: LDPE: 44 Shore D• Tube Markings: FW Specifications• Working Pressure: 3:1 Safety Factor• Base Resin Compliance: FDA (except red) NSF51 (LLDPE)• Recommended Fittings: LDPE: Push-in, Compression
• Lightweight and flexible• Superior dielectric properties• Easily heat sealed• Tasteless and odorless• Impermeable to gases and moisture
LDPE is extruded to close tolerances from high quality, low density polyethylene resins. All colors except red comply with FDA regulation 21 CFR 177.1520(c) for food contact applications. LDPE has a water absorption rate of 0.15% per ASTM D-570 standards.
Low Density Polyethylene Tubing
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.34
ACCESSORIES
MetricModel
Number*O.D.(mm)
I.D.(mm)
Min. Bend Radius (mm)
Working Pressure (PSIG) Weight(lbs/100ft)@ 25 ºF @ 65 ºF
QRMW06 6 4 12.7 160 65 2.59
QRMW08 8 5 19 190 75 4.15
QRMW10 10 6.5 22.2 170 70 5.71
QRMW12 12 8 28.6 155 60 7.43
Specifications• Temperature Range: All Diameters: -40 °F to 165 °F• Vacuum Rating: to 28 inHg• Diameter Tolerances: +/- 0.005" Inner• Working Pressure: 3:1 Safety Factor• Base Resin Compliance:
Outer Jacket: Meets UL94VO Testing Requirements Inner Tube: Meets UL94HB Testing Requirements
• Recommended Fittings: Push-in, Compression
Features• Protects tube from incidental weld spatter contact• Flexible with an excellent bend radius• Resistant to kink damage• Broad range of chemical resistance• Can be formed into retractable coils
Weld Spatter Resistant
WELD SPATTER TUBING
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.35
ACCESSORIES
Connector– = 6ft (2m) Power Cord
(with Grounded Plug)X = Conduit Connector
Voltage1224110230
CurrentACDC
Port Size02 = 1/403 = 3/804 = 1/2
Threads– = NPTB = BSPT
ModelEDV = Electronic Drain Valve
EDV – 04 – 110 AC
How to OrderElectronic Drain Valves
EDV-04-110AC pictured
Series A B C D
1/4, 3/8 5.75(146)
3.5(89)
2.25(57)
3.75(95)
1/2 6.0(152)
3.5(89)
2.75(70)
3.75(95)
ApplicationEliminate the manual draining of air lines with the EDV Series Electronic Drain Valve from Numatics. The EDV Series Valve is designed to remove condensation from filters, receiver tanks, separators, drip legs, drain traps, and dryers in electronically controlled intervals. The EDV valve is available in 1/4, 3/8, and 1/2 sizes. The large orifice allows even the largest rust and pipe scale particles to be easily expelled. Standard model includes a 110 Volt AC solenoid, 6ft (2m) power cord, and grounded plug. An EDV valve can be installed virtually anywhere.SpecificationsValve• Function: 2-Way, NC, Solenoid Valve• Valve Design: Pilot Operated Diaphragm Valve• Port Sizes: 1/4, 3/8• Orifice: 5/16” (8mm) 1.12 Cv; 1/2” (12mm) 2.45 Cv• Operating Pressure: 20 – 300 PSIG (1.3 – 20 bar)• Solenoid: Continuous Duty• Mounting: Any Position• Body Material: Brass
Timer• Material: Plastic Polyamid• Interval Timer: 1 – 45 min.• ‘On’ Timer: 0.25 – 25 sec.• Voltage: 12 – 230 V AC/DC• Frequency: 50/60 Hz• Power Rating: 10 Watt• Enclosure: NEMA 4/IP65• Ambient Temp: 130 ºF (55 ºC)
Lights• Left Indicator: Power On• Right Indicator: Solenoid Engineered
Dimensional Drawings - EDV Series Electronic Drain ValvesDimensions: inches (mm)
ELECTRONIC DRAIN VALVES
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.36
ACCESSORIES
ANSI Symbol
BSPP Thread Model SelectionBSPP Model PSIG (bar)
1/8 BSPP PS182AAG01 2 – 10 (0.14 – 0.69)
1/8 BSPP PS182BAG01 6 – 30 (0.40 – 2.07)
1/8 BSPP PS182CAG01 20 – 130 (1.38 – 8.96)
1/4 BSPP PS182AAG02 2 – 10 (0.14 – 0.69)
1/4 BSPP PS182BAG02 6 – 30 (0.40 – 2.07)
1/4 BSPP PS182CAG02 20 – 130 (1.38-8.96)
NPTF Thread Model SelectionNPTF Model PSIG (bar)1/8 NPT PS182AAN01 2 – 10 (0.14 – 0.69)
1/8 NPT PS182BAN01 6 – 30 (0.40 – 2.07)
1/8 NPT PS182CAN01 20 – 130 (1.38 – 8.96)
1/4 NPT PS182AAN02 2 – 10 (0.14 – 0.69)
1/4 NPT PS182BAN02 6 – 30 (0.40 – 2.07)
1/4 NPT PS182CAN02 20 – 130 (1.38 – 8.96)
Female Single Ended CordsetConnector
TypeConnector
Length Model Number
90° Elbow 5 Meters PS182-5-90
Straight 5 Meters PS182-5-ST
ApplicationNumatics PS182 is the most rugged of the Numatics Pressure Switches. Available in 1/8 or 1/4 NPT and BSPP threads, it is easily incorporated into an air system using a FlexiBlok® Diverter Plate or Diverter Block.The unique 12mm Micro Connector makes it simple for electrical connection. The knurled knob with tamper resistant hex screw makes it the easiest pressure adjustment on the market. It can be wired in either a normally open or normally closed configuration.SpecificationsHysteresis Adjustment: 10% Pressure Ranges: 2 – 10, 6 – 30, 20 – 130 Maximum Pressure: 600 psi Set Point Tolerance: +/- 1 psi or 5% Contact Rating: 4A Diaphragm Material: Buna-N Maximum Operating Cycles: 200/min Temperature Range: -40 ºF to 250 ºF (-40 ºC to 121 ºC) Voltage Range: 12 V DC to 250 V AC Sealing/Protection: IP 65 Housing Material: Brass Electrical Connection: 3-Pin Micro (12mm)*Comes standard with gold-plated contacts.
3.4
1.3
PS182 Pressure Switches
ANSI SymbolBSPP Thread Dimensions
Model A B CPS180BAG02 2.3 (58) 1.0 (27) 2.9 (74)
PS180CAG02 2.3 (58) 1.0 (27) 2.9 (74)
NPTF Thread DimensionsModel A B C
PS180BAN01 2.5 (64) 1.0 (27) 3.1 (79)
PS180CAN01 2.5 (64) 1.0 (27) 3.1 (79)
PS180BAN02 2.5 (64) 1.0 (27) 3.1 (79)
PS180CAN02 2.5 (64) 1.0 (27) 3.1 (79)
BSPP Thread Model Selection BSPP Model PSIG (bar)
1/4 PS180CAG02 14 – 150 (1 – 10)
1/4 PS180CAG02 14 – 150 (1 – 10)
NOTE: Use G suffix for gold-plated terminals (for applications below 50 mA), ex: PS180BAN02G
NPTF Thread Model SelectionNPTF Model PSIG (bar)
1/8 PS180BAN01 4 – 20 (0.3 – 1.5)
1/8 PS180CAN01 14 – 150 (1 – 10)
1/4 PS180BAN02 4 – 20 (0.3 – 1.5)
1/4 PS180CAN02 14 – 150 (1 – 10)
ApplicationNumatics PS180 is a line of pressure switches designed for accurate indication that proper system pressure is being achieved. Available in 1/8 or 1/4 threads, it is easily incorporated into an air system using a FlexiBlok® Diverter Plate.Featuring a rugged housing made from zinc-coated steel, the PS180 is designed for industrial multi-million cycle life applications. The 4-pin connector plug is included and contains a key way of preventing accidental misconnection. Pressure adjustment is tamper resistant, hindering unauthorized changes. It can be wired in either normally open or normally closed configurations and includes a case ground pin.SpecificationsContact Rating: 4A @ 250 V AC Protection: IP 65, Terminals IP00 Maximum Operation: 200/min Temperature Range: 0 ºF to 190 ºF (-15 ºC to 85 ºC) Maximum Pressure: 300 PSI (20 bar) Maximum Voltage: 250 V AC (200 DC) Hysteresis Adjustment: 15% Connector Material: Polyamid Diaphragm Material: Buna-N Housing Material: Zinc-plated Steel
Dimensional Drawings - PS180 Pressure Switches
PRESSURE SWITCHES
Dimensions: inches (mm)
*
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.37
ACCESSORIES
FlexiBlok® Pilot Operated RegulatorDiaphragm Repair KitsIncludes upper & lower diaphragm, inner valve assembly and inner valve springKit # DescriptionRKW22 22 Series Relieving KitRKW32 32 Series Relieving KitRKW42 42 Series Relieving KitRKW22N 22 Series Non-relieving KitRKW32N 32 Series Non-relieving KitRKW42N 42 Series Non-relieving Kit
FlexiBlok® LubricatorLubricator Dome Repair KitsIncludes adjustment knob and adjustment assemblyKit # Description
RKL12T
12 & 14 Series Lubricator Dome Repair Kit22 Series Lubricator Dome Repair Kit32 Series Lubricator Dome Repair Kit42 Series Lubricator Dome Repair Kit
Replacement Adjustment Knob KitsIncludes adjustment knob onlyKit # Description
L32-0612 & 14 Series Adjustment Knob22 Series Adjustment Knob32 Series Adjustment Knob
FlexiBlok® Shut Off ValveShut Off Valve Repair KitsIncludes slide and 2 O-ringsKit # DescriptionRKSV12 12 Series Shut Off Valve Repair KitRKSV14 14 Series Shut Off Valve Repair KitRKSV22 22 Series Shut Off Valve Repair KitRKSV32 32 Series Shut Off Valve Repair Kit
Mounting BracketsIncludes bracket and panel nutKit # DescriptionPK12 12 & 14 Series Mounting BracketPK22 22 Series Mounting BracketPK32 32 Series Mounting Bracket
FlexiBlok® Solenoid Soft Start Quick ExhaustSolenoid Replacement KitsIncludes coil only (fits 22 or 32 Series)Kit # DescriptionS32-44A 110 V (fits 22 or 32 Series)S32-45A 230 V (fits 22 or 32 Series)S32-46A 24 V AC (fits 22 or 32 Series)S32-43A 24 V DC (fits 22 or 32 Series)
NOTE: Numatics FRL does not recommend the disassembly of a Solenoid Soft Start unit outside of our factory.
FlexiBlok® Screws & O-ringsScrew and O-ring Replacement KitsIncludes piston assembly, inner valve assembly and inner valve springKit # DescriptionKAVS12-06 12 Series incl. 2 81mm tie rods, 2 106mm tie rods,
4 nuts
BKAVS12-0 12 Series incl. 20 81mm tie rods, 20 106mm tie rods, 40 nuts
KG12 12 Series incl. 2 screws, 1 O-ring (M4 x 12mm)
KGB12 12 Series bulk pack 100 screws, 50 O-rings (M4 x 12mm)
KG14 14 Series incl. 2 screws, 1 O-ring (M4 x 12mm)
KGB14 14 Series bulk pack 100 screws, 50 O-rings (M4 x 12mm)
KG22 22 Series incl. 2 screws, 1 O-ring (M5 x 12mm)
KGB22 22 Series bulk pack 100 screws, 50 O-rings (M5 x 12mm)
KG32 32 Series incl. 2 screws, 1 O-ring (M6 x 16mm)
KGB32 32 Series bulk pack 100 screws, 50 O-rings (M6 x 16mm)
KG42 42 Series incl. 2 screws, 1 O-ring (M8 x 1.25mm)
KGB42 42 Series bulk pack 100 screws, 50 O-rings (M8 x 1.25mm)
NOTE: Numatics FRL does not recommend the disassembly of a Solenoid Soft Start unit outside of our factory.
To order the Bowl Replacement Kit with a Drain or Buttonhead Fill, specify the appropriate suffix in the kit number (keeping suffixes in alphabetical order). For example, to order a Drain with a BKL12 kit, order as BKF12K. To order a Buttonhead Fill with a BKL22M kit, order as BKL22FM. Drain suffixes are as follows: F = Buttonhead Fill, K = Drain.
Replacement Drain KitKit # DescriptionAKF02 Auto Float Drain Kit (incl. drain, bushing, clip, O-ring)BKF02 Flexible Drain (includes drain assembly)DKF02 Standard Drain (incl. drain assembly)QKF02 Metal Manual Drain (incl. drain, bushing, clip, O-ring)JKF02 External Pulse Drain (incl. drain, bushing, clip, O-ring)RKF02 Manual Lever Drain (incl. drain, bushing, clip, O-ring)
FlexiBlok® Particulate FilterElement Replacement Kits Filter & Filter-RegIncludes bowl and O-ringKit # DescriptionEKF12A 12 & 14 Series 40 micron ElementEKF12B 12 & 14 Series 5 micron ElementEKF22A 22 Series 40 micron ElementEKF22B 22 Series 5 micron ElementEKF32A 32 Series 40 micron ElementEKF32B 32 Series 5 micron ElementEKF42A 42 Series 40 micron ElementEKF42B 42 Series 5 micron Element
Filter Repair KitsIncludes Turbo-Flo, element retainer, quiet zone baffle, deflector retainerKit # DescriptionRKF12B 12 & 14 Series 5 micron ElementRKF22B 22 Series 5 micron ElementRKF32B 32 Series 5 micron ElementRKF42B 42 Series 5 micron Element
FlexiBlok® RegulatorRegulator & F/R Repair Cage KitsIncludes bonnet with main spring (0 – 125 psi), adjusting screw and adjusting knobKit # DescriptionRKC14 14 SeriesRKC22 22 SeriesRKC32 32 SeriesRKC42 42 Series
Diaphragm Repair KitsIncludes diaphragm, inner valve assembly and inner valve springKit # DescriptionRKR12R 12 & 14 Series Relieving KitRKR22R 22 Series Relieving KitRKR32R 32 Series Relieving KitRKR42R 42 Series Relieving KitRKR12N 12 & 14 Series Non-relieving KitRKR22N 22 Series Non-relieving KitRKR32N 32 Series Non-relieving KitRKR42N 42 Series Non-relieving Kit
Piston Repair KitsIncludes piston assembly, inner valve assembly and inner valve springKit # DescriptionRKR12R 12 & 14 Series Relieving KitPKR12R 12 Series Relieving KitPKR12N 12 Series Non-relieving Kit PKR14R 14 Series Relieving KitPKR22R 22 Series Relieving KitPKR32R 32 Series Relieving KitPKR42R 42 Series Relieving KitPKR14N 14 Series Non-relieving KitPKR22N 22 Series Non-relieving KitPKR32N 32 Series Non-relieving KitPKR42N 42 Series Relieving Kit
Replacement Adjustment Knob KitsIncludes adjustment knob onlyKit # DescriptionR12-03 12 & 14 Series Adjustment KnobR22-03B 22 Series Adjustment KnobR32-03 32 Series Adjustment KnobR32-03 42 Series Adjustment Knob
FlexiBlok® Coalescing Filter Element Replacement Kits Filter & Filter-RegIncludes filter element and sealKit # Description
12 & 14 SeriesEKF12C 0.7 micron ElementEKF12CD 0.7 micron Element with PrefilterEKF12D 0.3 micron ElementEKF12DD 0.3 micron Element with PrefilterEKF12E 0.01 micron ElementEKF12ED 0.01 micron Element with PrefilterEKF12F Adsorbing Element
22 SeriesEKF22C 0.7 micron ElementEKF22CD 0.7 micron Element with PrefilterEKF22D 0.3 micron ElementEKF22DD 0.3 micron Element with PrefilterEKF22E 0.01 micron ElementEKF22ED 0.01 micron Element with PrefilterEKF22F Adsorbing Element
32 SeriesEKF32C 0.7 micron ElementEKF32CD 0.7 micron Element with PrefilterEKF32D 0.3 micron ElementEKF32DD 0.3 micron Element with PrefilterEKF32E 0.01 micron ElementEKF32ED 0.01 micron Element with PrefilterEKF32F Adsorbing Element
42 SeriesEKF42C 0.7 micron ElementEKF42CD 0.7 micron Element with PrefilterEKF42D 0.3 micron ElementEKF42DD 0.3 micron Element with PrefilterEKF42E 0.01 micron ElementEKF42ED 0.01 micron Element with PrefilterEKF42F Adsorbing Element
DPI Replacement KitsIncludes DPI assemblyKit # DescriptionUK600 14 Series DPI Replacement KitDPI22 22 Series DPI Replacement KitDPI32 32/42 Series DPI Replacement Kit
Bowl Replacement Kits Filter & Filter-RegIncludes bowl and O-ringKit # Description
12 & 14 SeriesBKF12 Polycarbonate Bowl with GuardBKF12C CircleVision™ BowlBKF12M Metal Bowl
22 SeriesBKF22 Polycarbonate BowlBKF22C CircleVision™ BowlBKF22M Metal Bowl
32 Series & 42 SeriesBKF32 Polycarbonate BowlBKF32C CircleVision™ BowlBKF32M Metal Bowl
To order the Bowl Replacement Kit with a Drain, specify the drain suffix in the kit number (keeping suffixes in alphabetical order). For example, to order a Flexible Drain with a BKF12 kit, order as BKF12B. To order an External Pulse Drain with a BKF12M kit, order as BKF12JM. Drain suffixes are as follows: B = Flexible Drain, J = External Pulse Drain, Q = Metal Manual Drain, R = Manual Lever Drain. See page 35 for additional drain option information.
Bowl Replacement Kits LubricatorIncludes bowl and O-ringKit # DescriptionBKL12 12 & 14 Series Polycarbonate BowlBKL12M 12 & 14 Series Metal BowlBKL22 22 Series Polycarbonate BowlBKL22C 22 Series CircleVision™ BowlBKL22M 22 Series Metal BowlBKL32 32 Series Polycarbonate BowlBKL32C 32 Series CircleVision™ BowlBKL32M 32 Series Metal Bowl
REPLACEMENT PARTS
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.38
ACCESSORIES NOTES
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.39
ACCESSORIESNOTES
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.40
ACCESSORIES NOTES
ASCO Headquarters (USA) | Tel (1) 800.972.2726 | www.asco.com | e-mail: [email protected]
Netherlands (31) 33-277-7911Singapore (65) 6556-1100South Korea (82) 2-3483-1570Spain (34) 942-87-6100United Kingdom (44) 1695-713600
France (33) 2-37-24-42-24Germany (49) 7237-9960India (91) 44-39197300Italy (39) 02-356931Japan (81) 798-65-6361Mexico (52) 55-5809-5640
Australia (61) 2-9-451-7077Brazil (55) 11-4208-1700Canada (1) 519-758-2700China (86) 21-3395-0000Czech Republic (420) 235-090-061Dubai - UAE (971) 4-811-8200
Global Contacts
03/1810M-IPC-01/09