Lightning Bolt Catalog 2006Bolt... · 2016. 3. 31. · Created Date: 6/15/2006 1:32:02 PM
catalog bolt
-
Upload
tik-nereikia-musu-gasdinti -
Category
Documents
-
view
142 -
download
0
description
Transcript of catalog bolt
PR
OD
UC
T C
AT
AL
OG
UE
Sormat Oy is a Finnish company, the largest manufacturer of fasteningmaterials in Scandinavia. Our operations and our management policyare based on certified EN-ISO 9001 and EN-ISO 14001 quality- andenvironmental systems.Our plant in Rusko manufactures fastening materials as well as accessoriesand fixings for electric and plumbing installations. Sormat Oy is a member of Sormat Group. Other member companies areSormat-PFG B.V. in Holland, Sormat France SAS in France and OOO Sormat-Ost in Russia.OOO Sormat-Ost in Russia is producing injection moulding products.
We guarantee a good availability of our products through our retailers.They, together with the end users, are continuously trained by our ownsales organisation and technical staff. Thus we can achieve the bestpossible professional skill in solving different problems in the field offastening.
Our organisation is flat and effective, enabling us to serve all our clientswith competence and efficiency. The high quality of our products,production activities and internal logistics provides our delivery channelswith a competitive service concept and helps to reach a satisfied end user.
SORMAT - A STRONG BRAND ENSURING A LONG TERM PARTNERSHIP
SORMATSORMATQUALITY AND
ENVIRONMENTQUALITY AND
ENVIRONMENT
1
ISO 9001ISO 14001
CERTIFIED
ORGANIZATION
FS S
Essential features of our quality policy
We operate by taking in consideration all demands set by the environment. We develope our activities by complying with constant improvement perceiving economical resources.
We commit to fulfill all environmental commitments prescribed by laws and regulations.
In improving environmental aspects and decreasing their impacts, we keep up documented instructions according to EN-ISO 14001.
Products are designed and manufactured according to customers demands, taking in accountenvironmental impacts during the life cycle of the product. Manufacturing processes are planned and carried out so, that the environmental impacts are minimized.
The amount of waste is minimized and the becoming waste is handled in an acceptable way.
We are working so that there is a continuous awareness of environmental aspects and risks.
We have documented instructions concerning information about environmental topics to personnel,authorities and external interest groups.
An integrated idea of quality consists of both product quality, and the quality of services.A high customer satisfaction is achieved by managing both of these aspects.
To be able to fulfill the demands created by customers, competition and authorities, is a proof of managing both product and service qualities.
Service quality means that we are competitive, we serve our customers, and we gain our planned results doing it effectively.
One of the essential demands for our activities is a high productivity and a high delivery performance.
Quality is achieved by preventing nonconformities in advance. For us a nonconformity is specified from the customers point of view. Customer demands are determing our internal quality specifications.
Everybody in Sormat group is responsible to implement a quality liability that aims to a stable and satisfied customer relation.
Essential features of our environmental policy
S-KA, S-KAK, S-KAHLA, LAH MTA, MSASB, SBSLB, LBS, LBCES, ESS, ESSH, ESCEB, HBHDP, HDSRA, RAR, RAHCONFIX, PKNKRH, SKRH
Through bolt anchorsDrop in anchorsMultifunction- and brass anchorsPFG shieldanchorsPFG shieldanchorsPFG shieldanchorsPFG shieldanchorsHeavy duty anchorsScrew anchorsConcrete nails, Express nailsFrame anchors, adjustable frame anchors
METALLIC ANCHORS AND FASTENERS
...............................................................10....................................................................................12..................................................................................13..................................................................................14
.............................................................................16....................................................................18
...................................................................................19...............................................................................21
.........................................................................23............................................................................24
................................................................................25
NAT, NAT L, LITLYTKAT, KAT NKBT, KBT M
DRYWALL ANCHORS
KTS, KTH, RIP-L, RIP-U
KEMKEVA, VSS, VKS, VHKEMLA, VSS, VKS, VHITH PROGRAM
Nylon plugsNailplugsFacade plugsPlugs and screws for aerated concrete
Chemical capsulesStuds for chemical capsulesHammercapsules and studsInjection resins and accessories
Threaded bars, Installation bars
Driva and metallic drywall anchorCavity anchor and Universal plug
NYLON- AND PLASTIC ANCHORS
CHEMICAL ANCHORS
FIXING ACCESSORIES
DRIVA, DRIVA M, MOLAOLA, YLT
SDS PLUSSDS MAXIP, EIP, Special drills, SDS+ accessoriesSDS Max accessories
SDS + shankSDS Max shankMasonry drillsSDS Max accessories
DRILLBITS
BANDING KVA range, PVA range, LVA
.......................................................................30.........................................................................................31
..............................................................................32....................................................................33
........................................................................................26............................................................27
.........................................................28......................................................................29
........................................................34...................................................................................35
................................................................................36.................................................................................37
..........................38...........................................................39
..................................................40
.........................................................41
Essential subjects of quality and environmental policiesRight fixings for right base materialsDifferent base materials and suitable fixings for thoseInformation about restrictions of use for different anchorsInformation about rawmaterials and coatingsEnvironmental aspects and impacts of Sormat productsOfficial approvals granted by different authorities
Quality and environmental policyFixing guideBase materialsRestrictions of useMaterials and coatingsEnvironmental managementOfficial approvals
GENERAL
..............1.........................................4
................5..........6
.............................7.............8
....................9
CONCRETE INSERTS VASB, VASBS, VASBR, VASD, VASDS, VASDR, ST, ME ......42
SORMATPRODUCTSSORMAT
PRODUCTSINDEXINDEX
2
CABLE TIES
JS, JSS, JSM, JSSM, JST, SLACable ties, Cable tie plug, Banding wire
.......................................................................................43...........................................................................................44
................................45
SC, NTKK, KKA, KKKSKP, KPA, KLKR, VVA, VKARK, RKK, ALKI
NailclipsCable clamps, installation barCable clampsCable clamps, support piecesRow clamps, installation profile
CABLE GLANDS, PLASTIC
CABLE FIXINGS
GrommetsSET, SETH, SET V0
FIXING SYSTEMS
Facade reparation anchorsIsolation plastering bracketAccessories
RU, PUERKLPT, RVK, RVKM, UNIVERSAL SCREW
..................................................................55
...........................................................................46....................................................................47
PLUMBING ACCESSORIES
Pipe supportsPipe supports
KOPI, KUPIPPC, PPL, JR, JRL
.....................................................................................................48SETTING TOOLS
...................................................................................50.......................................................................51
.............................................................................52...........................................................................53...........................................................................54
SORMATPRODUCTS
INDEX
3
...........................................49
TECHNICAL DATA
WE SERVE YOU
NOTES
...........................................56
.......................................................57
.....................................................................................................58
CONTACT INFORMATION
FORCES AND FAILURE MODES
maxM8maxM8
(N)(N)
Concrete Brick Hollow brick
S-KA
LA, LAH
MTA
PFG
HDP, HDS
Aeratedconcrete
Lightgrovel
Plasterboard
(L)(L)
maxM8maxM8
maxM8maxM8
maxM8maxM8
maxM8maxM8
maxM8maxM8
KAT, KAT N (N)(N) (N)(N)
(L)(L)
MSA
PKN
Confix
KRH
NAT, NAT L
LYT
KBT
KEM, KEMLA
KBTM
ITH
DRIVA
OLA
MOLA
YLT
Heavy fixings Light fixings
FIXING GUIDE PRODUCT RANGE
4
maxM8maxM8
maxM8maxM8
maxM8maxM8
maxM8maxM8 Max. recommended anchor size
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
CONCRETEThe most common building material. Concrete is mainly used in industrial building because of it´s high strength.In housebuilding typical concrete structures are foundations, supporting structures, midsoles and stair elements.All expanding anchors as well as chemical anchors are suitable for use in concrete.Restrictions of use are spacings and edge distances.
SOLID BRICKA very common building material. Brick is used mainly in small house building.In industrial building brick is mainly used as material of separating structures.All expanding anchors as well as chemical anchors are suitable for use in brick.Restrictions of use are spacings, edge distances and sizes of fixings (max. M 8 is recommended).
HOLLOW BRICKA very common building material. Hollow brick is mainly used as material for separating structures, andin constructions where some kind of thermal isolation is required.Suitable anchors for hollow brick are Nylon plugs made with a long expanding zone as well as injectionresins used with a sleeve. Restrictions of use are the same as in solid brick.
NATURAL STONEMain use in buidings is in covering surfaces like facades and floors.All expanding and chemical anchors are suitable for use in natural stone.Restrictions of use are spacings and edge distances. Because of brittleness, stone cracks easily.
AERATED CONCRETEA rather common building material in all building because of it´s weight and flexibility in use.Aerated concrete is used mostly in separating structures, but also in supporting structures. Suitable anchors for aerated concrete are Nylon plugs with long expansion zone and those, specially designed for this material, like KBT. Chemical fixings can be used with restricions ( special shape of the hole).
LIGHT GROVEL A common building material in small house building. It is mainly used in foundations and supportingstructures. Suitable anchors for this material are Nylon plugs with long expanding zone. Chemical anchorscan be used with restrictions (special shape of the hole).
PLASTERBOARDA very common building material in all building. Main use of this material is in surface structures.Suitable fixings are hollow wall and cavity anchors.
TECHNICAL DATA BASE MATERIALS
h = min. Thickness of the embedment membermin
d = drill hole diameter0
h = drill hole depth1
h = overall embedment depth of the anchornom
t = fixture thicknessfix
General symbols
MATTERS TO BE OBSERVED WHEN INSTALLING AN ANCHOR
Following matters have to be considered in order to make a proper fixing:Enough strength in the base material (Concr. >C20); base material´s strength har a remarkable influence in the capacity of an anchor.Right size of the hole; anchors do not fit in too small holes, and they do not work properly, or at all, in too big holes.Embedment depth according to instructions; embedment depth has a remarkable influence in the capacity of an anchor.
5
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENTTECHNICAL DATASETTING DEPTHS
DISTANCES
h min
h nom
s cr
c cr
N
V
Force in general
Tension force
Shear force
Min. thickness of concrete member
Min. embedment depth
Min. spacing of two anchors
Min. edge distance
F
Anchor type
20xØ
4xh nom
4xh nom
4xh nom
4xh nom
4xh nom
15xØ
2,5
10xØ
1xh nom
1xh nom
10xØ
10xØ
4xh nom
xh nom
10xØ
2xh nom
2xh nom
2xh nom
2xh nom
2xh nom
6xØ
1,25Xh nom
50
1xh nom
1xh nom
50
50
2xh nom
15xØ
6xh nom
6xh nom
6xh nom
6xh nom
6xh nom
15xØ
2,5xh nom
100
2xh nom
2xh nom
100
100
4xh nom
10xØ
3xh nom
3xh nom
3xh nom
3xh nom
3xh nom
10xØ
1,5xh nom
75
1xh nom
1xh nom
75
75
2xh nom
30xØ
9xh nom
9xh nom
9xh nom
9xh nom
9xh nom
30xØ
3xh nom
150
2xh nom
2xh nom
150
150
4xh nom
1,5x h nom
1,5xh nom
1xh nom
1xh nom
h nom+10
1xh nom
1,5xh nom
1,5xh nom
h nom+20
h nom+10
h nom+10
h nom+10
h nom+10
1,5xh nom
C + C1 2h min C cr
VN
S cr C + C1 2C cr
Edge distances and spacings
Through bolt
Drop in anchor
PFG anchor
Multifunction anchor
Heavy duty anchor
Brass anchor
Screw anchor
Chemical anchors
Facade plug
Nailplug
Nylon plug
Express nail
Concrete nail
Concrete inserts
All dimensions in millimeters
In anchoring, distances like spacings and edge distances have remarkable influence in capacities. Capacities for different types of anchors in the table below are based on tests in which the distances shown in the table have been used.If the distances are reduced, the capacities are also decreasing.
6
Unless it is not separately mentioned, the capacities of anchors on the product sides are based on the spacings and edge distances in the table below.
Metals
TECHNICAL DATA MATERIALS ANDCOATINGS
Coldforming steel
Freecutting steel
Freecutting steel
Stainless steel
Stainless steel
Cold rolled steelband
Brass
Construction steel
Cold rolled steelband
Stainless steelband
Plastics
Polyamide PA 6
Polyamide PA 66
Polypropene
Polystyrene
Polyethylene
Thermoplastic elastomere
Polyolefine
Coatings
Zinc plating
Hot dip galvanizing
Sherardizing
Nickling
DIN 1654
DIN 1651
DIN 1651
EN 10088
EN 17440
EN 10016
DIN 17660
EN 10025
EN 10142
EN 10088
440-660
390-650
390-650
500-850
550-850
420-500
380-450
340-500
400-450
600-700
Through bolts M8 - M16 L max. 150 mm
Through bolts M6, M20 and M8-M16 L>150 mm
Drop-in anchors, Concrete inserts
Stainless steel through bolts M8 - M16 L max. 150 mm
Stainless steel through bolts M6, M20 and M8-M16 L>150 mm
PFG shields
Brass ancors
Threaded bars and studs
Steel bandings
Stainless steel bandings
Type Standard Tensile strength *2
N/mm
Used f.ex. in following products
Temperature range in useOC
-40 ... +80
-40 ... +80
0 ... +90
-20 ... +70
-50 ... +80
-70 ... +110
-40 ... +100
NAT, LYT, KAT, DRIVA
JS, JSS, JST
SC RANGE
RK
YLT, NT
OLA
SET RANGE
Type of plating Standard
SFS 4405
SFS 4449
BS 4921
SFS 4444
Min. 5
25 - 45 *
15 - 80 **
15
Thicknessµ
Use in following conditions
* Varies with thread dimension: < M8 = 25 µ, M10 - M22 = 45 µ
* Varies with material dimension.
Type
Dry atmosphere indoors
Dry and humid atmosphere indoors
Dry and humid atmosphere indoors
Prevents brass from oxygenizing
** Varies with thread dimension
7
Used f.ex. in following products
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENTENVIRONMENTLIFESPAN
IMPACTS
In use
Metals
Plastics
Chemicals
Type
Impacts of steel manufacturing
Impacts of oil refining- and chemical industry
Impacts of oil refining- and chemical industry
Rawmaterials
Production
Metal products
Metal products
Metal products
Plastic products
Chemical products
Products generally
Product type Process
Coldforming
Turning
Pressing
Injection moulding
Packaging
Packaging
Environmental impacts
Use of electric energy, expired oils and waste are recycled
Use of electric energy, waste and expired coolant fluid is recycled
Use of electric energy, waste is recycled
Use of electric energy, waste is recycled
Rawmaterial packings are recycled, waste is collected as problem-waste
Use of electric energy, use of recycklable packaging material.
Environmental impacts
In use
Metals
Plastics
Chemicals
Type
Products in use
Environmental impacts
In use
Metals
Plastics
Chemicals
Type
Products after use
Environmental impacts
Can be recycled
Not harmful waste, can be taken to dump site / energy recovery
Not harmful waste, can be taken to dump site
None
None
None
8
National and international approvals
TECHNICAL DATA OFFICIALAPPROVALS
S - KA
S - KAD
S - KAK
S - KAKD
S - KAH
PFG
LA
LAH
PU M6
RU M8
RAH 10x55
VA
Confix
Drills
ETA-01/0004 Option 4
ETA-00/0006 Option 6
ETA-01/0003 Option 4
ETA-01/0012 Option 8
BY 5B SITAC I T B
No. 143
No. 143
No. 143
No. 143
No. 143
No. 144
No. 144
No. 151
No. 151
No. 143
No. 152
3711/81
3711/81
3711/81
3711/81
3711/81
2629/93
AT-15-4496/2000
AT-15-4496/2000
AT-15-4496/2000
AT-15-4496/2000
AT-15-2523/97
AT-15-2523/97
NT Fire 005 ISO 834
NT Fire 005 ISO 834
NT Fire 005 ISO 834
NT Fire 005 ISO 834
Others
NT Fire 005 ISO 834
NT Fire 005 ISO 834
International National
Product
Sormat products have several national and internationalapprovals of which the most important is the European Technical Approval ETA, that allows the use of CE marking.All these approvals are connected with an external quality control, performed by neutral authorities, to convince the quality of products and manufacturing processes.
SITACSITAC
FINNISH CONCRETE ASSOCIATION
NT FIRE 005ISO 834
NT FIRE 005ISO 834
PGM Pruefgemeinschaft
Mauerbohrer
Sormat as a company has certified quality- and environmentalsystems according to EN-ISO 9001 and EN-ISO 14001.
9
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
S-KAD, S-KAKDS-KA, S-KAK, S-KAH
S-KA steel, zinc platedS-KAK steel, hot dip galvanizedS-KAH stainless steel (grade 316)
THROUGH BOLT METAL ANCHORS
Range and packages
Approved by
Size PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Code
Through bolt is designed for medium heavy and heavy fixings in hard embedments like concrete, solid brick (max. M 8) and natural stone.A ready to install anchor specially suitable for through fixings. A wide selection of sizes and corrosion protections.More technical information on technical pages 7 and 9.
10
S-KAKD S-KAHS-KAKS-KADS-KA
6õ40
6/15
6/50
8õ50
8/10
8/30
8/55
8/85
10õ60
10/10
10/25
10/30
10/55
10/80
12/5
12/20
12/35
12/65
12/105
12/155
16õ90
16/5
16/20
16/45
16/70
16/95
20/20
20/70
20/130
00100
00102
00104
00110
00112
00114
00116
00118
00130
00132
00136
00137
00139
00150
00152
00153
00155
00157
00169
00170
00171
00173
00175
00176
00180
00182
00184
00134
00138
00140
00154
00156
00158
00160
00172
00174
02100
02102
02104
02110
02112
02114
02116
02118
02130
02132
02136
02137
02139
02150
02152
02153
02155
02157
02170
02171
02173
02175
02176
02180
02182
02184
04100
04102
04110
04112
04114
04116
04130
04132
04136
04138
04150
04152
04154
04156
04170
04171
04172
04180
04182
10,4
15,4
22,7
22,2
29,5
36,1
43,5
52,8
44,4
53,2
60,8
62,8
75,9
88,3
81,7
92,3
103,8
124,7
186,1
219,5
159,4
185,7
204,6
239,0
296.2
328,2
448,3
570,2
717,8
200/1000/56000
150/750/42000
100/500/28000
100/500/28000
50/250/14000
50/250/14000
50/250/14000
50/250/14000
50/250/14000
50/250/14000
25/125/7000
25/125/7000
25/125/7000
25/125/7000
25/125/7000
25/125/7000
25/125/7000
25/125/7000
25/125/3500
10/50/2800
10/50/2800
10/50/2800
10/50/2800
10/50/2800
10/50/2800
10/50/2800
5/25/1400
5/25/1400
5/25/1050
02134
02138
02140
02154
02156
02158
02160
02172
02174
Anchorsize
6 x 40 *
M 6 *
8 x 50 *
M 8
10 x 60 *
M 10
M 12
16 x 90 *
M 16
M 20 *
Anchor size T insth nom
CrackedNon cracked
30
40
40
55
40
60
70
70
95
120
7
7
18
18
30
30
54
100
120
240
mm Nm kN kN
Permissible loads in concrete > C 25
* Do not belong to ETA** D versions with 2 cones
Capacities
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
2
15
50
2
10
30
55
85
3
10
25
30
55
80
5
20
35
65
105
155
3
5
20
45
70
95
20
70
130
6
6
6
8
8
8
8
8
10
10
10
10
10
10
12
12
12
12
12
12
16
16
16
16
16
16
20
20
20
l d 0 h 1 t fix max
mm mm mm
f
mm
18
28
28
25
32
41
66
92
28
34
37
54
67
92
35
50
52
82
46
46
45
53
65
76
55
55
55
55
55
Installation parameters
1,4
1,8
1,6
2,4
2,1
3,6
6,4 4,8**
7,5
10,0
13,9
2,0
3,0
4,8 3,6**
6,4
35
50
50
45
65
65
65
65
50
70
70
70
70
70
80
80
80
80
80
80
80
105
105
105
105
105
130
130
130
THROUGH BOLTMETAL ANCHORS
11
6õ40
6/15
6/50
8õ50
8/10
8/30
8/55
8/85
10õ60
10/10
10/25
10/30
10/55
10/80
12/5
12/20
12/35
12/65
12/105
12/155
16õ90
16/5
16/20
16/45
16/70
16/95
20/20
20/70
20/130
40
65
100
50
75
95
120
150
60
80
95
100
125
150
85
100
115
145
185
235
90
110
125
150
175
200
170
220
280
mm
LA, LAH
METAL ANCHORSDROP IN ANCHOR
LA(H) 6
LA(H) 8
LA(H) 10
LA(H) 12
LA(H) 16
LA(H) 20
25
30
40
50
60
80
8
10
12
15
20
25
11
13
15
19
25
33
25
30
40
50
60
80
M 6
M 8
M 10
M 12
M 16
M 20
LT 6
LT 8
LT 10
LT 12
LT 16
LT 20
1,0 / 1,1
1,6 / 1,3
2,2 / 1,5
3,4 / 2,6
5,6 / 4,6
7,9 / 6,6
1,5 / 1,1
1,9 / 1,5
2,4 / 1,8
3,9 / 2,8
6,8 / 4,7
9,8 / 6,6
ConcreteC 20
Setting tool
Size Thread l d0 h1 f
LA zinc platedLAH stainless steel grade 316 (A4)
d = drillhole diameter0
f = thread lengthl = anchor lengthh = embedment depth1
Drill a hole acc. to instructions below.
Expand the anchor with a setting tool (page 48).
Drop in anchor is designed for medium heavy and heavy loads. The anchor is suitable for fixings in hard materials like concrete, solid brick (max. M 8) and natural stone.The anchor has a female thread. Suitable screwlength is 1-1,5x the nominal size of anchor + fixture thickness.
It must be observed that the anchor can not be expanded with the screw !
LA 6
LA 8
LA 10
LA 12
LA 16
LA 20
70006
70008
70010
70012
70016
70020
LAH 6
LAH 8
LAH 10
LAH 12
LAH 16
LAH 20
74006
74008
74010
74012
74016
74020
100 / 1000 / 76000
100 / 1000 / 48000
50 / 500 / 24000
50 / 500 / 21000
25 / 250 / 10500
20 / 100 / 4200
6,8
12,2
22,8
46,3
96,8
192,0
100 / 1000 / 76000
100 / 1000 / 48000
50 / 500 / 24000
50 / 500 / 21000
25 / 250 / 10500
20 / 100 / 4200
6,8
12,2
22,8
46,3
96,8
192,0
Range and packages
Range and packages
Installation parameters and capacities
mm mm mm mm
ProductCode PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Permissible loads in kN Tension / Shear
ConcreteC 40
ProductCode PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
12
MTA
METAL ANCHORS MTA MSA
MTA 8/12
MTA 10/16
50
60
12
16
10/22
12/30
25
25
M 8/12
M 10/16
LT MTA 8/12
LT MTA 10/16
2,0 / 2,6
4,2 / 4,6
3.0 / 2,6
6,0 / 4,6
Permissible loads in kN *Tension / Shear
Concr. C 50 emb.dpth 25 mm
Settingtool
Product Threadfemale/male
l d0 h1 min ffemale/male
ProductCode PackagesBox / Outer box
Drill a hole acc. to the table below.
Expand the anchor with a setting tool.
Multifunction anchor MTA is designed for medium heavy and heavy loads.MTA can be installed in hard materials like concrete, brick and natural stone.The anchor has both male- and female thread.Using the nut and the washer MTA can be installed also in thin or hollow constructions. In such situation the anchor acts like an undercut anchor !
It must be taken in consideration that the anchor can not be expanded with a screw !
Weightkg/1000 pcs
Restrictions of use (emb.depth, spacings and edge distances) on page 6.Materials and coatings on page 7, official approvals on page 9.
MTA 8/12
MTA 10/16
70030
70031
MSA 4
MSA 5
MSA 6
MSA 8
MSA 10
MSA 12
MSA 16
72204
72205
72206
72208
72210
72212
72216
25 / 250
25 / 250
48,4
103,5
200 / 2000
200 / 2000
100 / 1000
100 / 1000
50 / 500
50 / 500
25 / 250
1,1
2,7
4,7
8,1
13,3
24,0
53,7
Range and packages
Installation parameters and capacities
mm mm mm mm
l d0 h1 min
mm mm mm
MSA
Product
MSA 4
MSA 5
MSA 6
MSA 8
MSA 10
MSA 12
MSA 16
M 4
M 5
M 6
M 8
M 10
M 12
M 16
Thread
16
20
24
30
34
40
44
5
6
8
10
12
16
20
16
20
24
30
34
40
44
Screw length
16
20
24
30
34
40
44
+ t fix+ t fix
+ t fix+ t fix+ t fix+ t fix
t fix = Fixture thickness
Permissible loads in kN *
TensionConcrete C 25
0,6
0,7
1,0
1,5
2,1
3,2
4,1
* includes safety factor 5
l
d0
h1 min
= Anchor length
= Anchor od / drill dia.
= Min. embedm.depth
= Thread lengthf
** 8/12=35 mm, 10/16=45 mm
An anchor made of brass, designed for light and medium heavy fixings in hard materials like concrete, brick and natural stone. MSA is expanded with the screw that is going to be used for attaching the fixture.
Range and packages
ProductCode PackagesBox / Outer box
Weightkg/1000 pcs
* includes safety factor 4
Restrictions of use (emb.depth, spacings and edge distances) on page 6.Materials and coatings on page 7.
l
d0
h1 min
t fix
= Anchor length
= Anchor od / drill dia.
= Min. embedm.depth
= Fixture thickness
Concr. C 50 max. emb.dpth **
Installation parameters and capacities
13
+ t fix
mm
METAL ANCHORSPFG ANCHORSSB, SBS
Size
77101*
77125*
77102*
77103*
77104
77105
77106
77107
77126
77108
77109
77127
77110
77128*
77111
77130*
77129
77112
77113
77114
77115
77131
77132*
77116*
77133
77117
77136*
77118
77134*
77135
77138*
77119
77120
77121
77122
SB / SBS
50 / 500
50 / 500
50 / 500
50 / 500
50 / 500
50 / 500
50 / 250
50 / 250
50 / 250
50 / 250
50 / 250
50 / 250
25 / 125
25 / 125
50 / 250
25 / 125
50 / 250
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
10 / 100
10 / 100
10 / 50
10 / 100
10 / 100
10 / 50
10 / 50
10 / 50
10 / 50
10 / 50
10 / 50
14,7
15,8
18,3
22,2
24,8
27,5
32,0
49,9
62,7
56,7
69,9
77,1
82,7
89,0
84,7
96,2
89,1
106,1
98,6
117,1
126,3
136,2
147,0
154,3
190,6
200,3
239,3
171,0
179,4
212,6
254,2
230,8
325,5
399,1
366,1
SB Studbolt, zinc platedSBS Studbolt, sherardized
5-10
5-20
5-40
6- 8
6-13
6-28
6-53
8- 7
8-17
8-27
8-42
8-62
8-82
8-102
10-10
10-10x60
10-20
10-30
10-40
10-50
10-70
10-90
12- 8
12-18
12-18x80
12-28
12-28x100
12-38
12-48
12-48x 80
12-48x100
12-65
16-15
16-25
16-45
SB SBS
77150*
77151*
77152*
77153*
77154
77155
77156
77157
77159
77158
77160
77161
77162
77163*
77164
77166*
77165
77168
77167
77169
77170
77171
77172*
77173*
77175
77177
77179*
77174
77176*
77178
77181*
77180**
77182*
77184*
77183*
14
PFG anchor is for meadium heavy and heavy fixings in solid and hard materials like concrete, solid brick (max. M 8) and natural stone.Due to PFG´s large expansion, it is suitable also in materials of slightly worse and porous quality like in many old constructions.
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
Range and packages
Codes PackagesBox / Outer box
Weightkg/1000 pcs
* Outgoing products** Non-stock products
Installation parameters and capacities
Size Thread
METAL ANCHORS PFG ANCHORSSB, SBS
L = t fix max T instd 0 h 1h nom
mmmmmm Nmmm
Permissible loads in kN*Tension / Shear
Concrete >C 25
* Includes safety factor >3Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
T Installation torqueinst
l Length of the anchor shield
d Drilling diameter0
h Drilling depth1
t Fixture thicknessfix
h Embedment depthnom
4
4
4
6
6
6
6
14
14
14
14
14
14
14
27
27
27
27
27
27
27
27
46
46
46
46
46
46
46
46
46
46
110
110
110
10
20
40
8
13
28
53
7
17
27
42
62
82
102
10
10
20
30
40
50
70
90
8
18
18
28
28
38
48
48
48
65
15
25
45
40
40
40
40
45
45
45
45
55
45
55
55
55
55
60
70
60
70
70
70
70
70
70
70
90
90
110
70
70
90
110
90
90
110
90
8
8
8
10
10
10
10
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
25
25
25
M 5
M 5
M 5
M 6
M 6
M 6
M 6
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M16
M16
M16
5-10
5-20
5-40
6- 8
6-13
6-28
6-53
8- 7
8-17
8-27
8-42
8-62
8-82
8-102
10-10
10-10x60
10-20
10-30
10-40
10-50
10-70
10-90
12- 8
12-18
12-18x80
12-28
12-28x100
12-38
12-48
12-48x80
12-48x100
12-65
16-15
16-25
16-45
15
35
35
35
35
40
40
40
40
50
40
50
50
50
50
50
60
50
60
60
60
60
60
60
60
80
80
100
60
60
80
100
80
80
100
80
2,1
2,1
2,1
2,6
2,6
2,6
2,6
4,8
4,8
4,8
4,8
4,8
4,8
4,8
6,5
6,5
6,5
6,5
6,5
6,5
6,5
6,5
8,7
8,7
8,7
8,7
8,7
8,7
8,7
8,7
8,7
8,7
12,8
12,8
12,8
3,5
3,5
3,5
4,6
4,6
4,6
4,6
8,3
8,3
8,3
8,3
8,3
8,3
8,3
13,2
13,2
13,2
13,2
13,2
13,2
13,2
13,2
19,2
19,2
19,2
19,2
19,2
19,2
19,2
19,2
19,2
19,2
22,8
22,8
22,8
METAL ANCHORSPFG ANCHORSLB, LBS, LBC
5-10
6-15
6-30
6-35
6-45
8-15
8-20
8-30
8-45
10-15
10-30
10-35
10-50
10-80
12-20
12-35
12-50
12-70
16-20
16-25
16-35
16-60
CodesSize
LB / LBS / LBC
50 / 500
50 / 500
50 / 500
50 / 500
50 / 500
50 / 250
50 / 250
50 / 250
50 / 250
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
10 / 50
10 / 50
10 / 50
10 / 50
10 / 50
15,2
23,4
28,0
27,2
27,4
57,8
58,3
62,0
65,9
92,4
99,6
102,3
111,4
129,0
175,3
178,4
193,6
212,8
363,0
360,0
368,0
424,0
Approved by
LB Loose bolt, shield zinc platedLBS Loose bolt, shield sherardizedLBC Loose bolt, shield cast iron, unplated
LBSLB LBC*
77200*
77201
77210
77202
77211
77212
77203
77213
77204
77205
77214
77206
77215
77216
77207
77217
77208
77218
77219
77209
77220
77221
-
77260 *
-
77261 *
-
-
77262 *
-
77263 *
77264 *
-
77265 *
-
-
77266 *
-
77267 *
-
-
77268 *
-
-
77229 *
77230
77231 **
77232
77233 **
77234 **
77235
77236 **
77237
77238
77239 **
77240
77241 **
77242 **
77243
77244 **
77245 **
77246 **
77247 **
77248 **
77249 **
77250 **
16
PFG shield anchor is designed for medium heavy and heavy loads. PFG can be installed in hard materials like concrete, brick (max. M 8) and natural stone.Due to PFG´s powerful and large expansion, it can also well be used in more porous materials like in old constructions, often of slightly worse quality.
PackagesBox / Outer box
Weightkg/1000 pcs
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
Range and packages
* Outgoing products** Non-stock products
Type Thread
METAL ANCHORS PFG ANCHORSLB, LBS, LBC
l = t fix max T instd 0 h 1h nom
mmmmmm Nmmm
2,4*
2,8
2,8
2,8
2,8
5,0
5,0
5,0
5,0
6,7
6,7
6,7
6,7
6,7
8,9
8,9
8,9
8,9
13,4*
13,4*
13,4*
13,4*
6
10
10
10
10
25
25
25
25
50
50
50
50
50
85
85
85
85
120
120
120
120
10
15
30
35
45
15
20
30
45
15
30
35
50
80
20
35
50
70
20
25
35
60
40
45
45
45
45
55
55
55
55
65
65
65
65
65
85
85
85
90
105
105
105
105
8
10
10
10
10
14
14
14
14
16
16
16
16
16
20
20
20
20
25
25
25
25
35
40
40
40
40
50
50
50
50
60
60
60
60
60
80
80
80
80
100
100
100
100
M 5
M 6
M 6
M 6
M 6
M 8
M 8
M 8
M 8
M10
M10
M10
M10
M10
M12
M12
M12
M12
M16
M16
M16
M16
LBLBS/LBC
5-10
6-15
6-30
6-35
6-45
8-15
8-20
8-30
8-45
10-15
10-30
10-35
10-50
10-80
12-20
12-35
12-50
12-70
16-20
16-25
16-35
16-60
Approved by
17
Installation parameters and capacities
Permissible loads in kNConcrete >C 25
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
* these sizes are not included in the approval
Tension Shear
3,5*
4,6
4,6
4,6
4,6
8,3
8,3
8,3
8,3
13,2
13,2
13,2
13,2
13,2
19,2
19,2
19,2
19,2
22,8*
22,8*
22,8*
22,8*
T Installation torqueinst
l Length of the anchor shield
d Drilling diameter0
h Drilling depth1
t Fixture thicknessfix
h Embedment depthnom
METAL ANCHORSPFG ANCHORSES, ESS, ESSH, ESC
ES ESS / ESSH / ESC
Approved byES ESS ESSHESC
Anchorshield, zinc platedAnchorshield, stainless steel AISI 316 (A4)Anchorshield, sherardizedAnchorshield, cast iron, unplated
Range and packages
ProductCode
77500
77501
77502
77503
77504
77505
77601
77602
77603
77604
77520
77521
77522
77523
77524
77525
77510
77511
77512
77513
77514
77515
77516
77506
7,3
12,2
31,5
44,2
92,6
155,0
12,2
31,5
44,2
92,6
7,3
12,2
31,5
44,2
92,6
155,0
9,1
11,2
17,0
29,9
47,3
101,9
212,3
410,3
50 / 500
50 / 500
50 / 500
50 / 250
25 / 125
10 /100
50 / 500
50 / 500
25 /250
10 /100
50 / 500
50 / 500
50 / 500
50 / 250
25 / 125
10 / 100
50 / 500
50 / 500
50 / 500
50 / 250
50 / 250
25 / 125
10 / 100
5 / 25
ES 5 *
ES 6
ES 8
ES 10
ES 12
ES 16
ESS 6
ESS 8
ESS 10
ESS 12
ESSH 5 *
ESSH 6
ESSH 8
ESSH 10
ESSH 12
ESSH 16
ESC 4 *
ESC 5 *
ESC 6 *
ESC 8 *
ESC 10 *
ESC 12 *
ESC 16 *
ESC 20 *
18
PackagesBox / Outer box
Weightkg/1000 pcs
PFG anchor is for meadium heavy and heavy fixings in solid and hard materials like concrete, brick (max. M 8) and natural stone.Due to PFG´s large expansion, it is suitable also in materials of slightly worse and porous quality like in many old constructions.
* Outgoing products
METAL ANCHORS PFG ANCHORSEB. / HB.
Sizes and codesType PackagesBox / Outer box
HBHBSHBFHBFS
Zinc plated anchor with hookboltSherardized anchor with hookboltZinc plated anchor with forged hookboltSherardized anchor with forged hookbolt
Range and packages
HBT / HBTS HBH / HBHS
HB / HBS / HBF / HBFSEB / EBS / EBF / EBFS
EB *
EBS *
EBF
EBFS *
HB *
HBS *
HBF
HBFS *
HBT *
HBTS *
HBH *
HBHS *
77401
77410
-
-
77301
77310
-
-
-
-
77355
77350
77402
77411
77430
77420
77302
77311
77330
77320
-
-
77356
77351
77403
77412
77431
77421
77303
77312
77331
77321
77375
77370
77357
77352
77404
77413
77432
77422
77304
77313
77332
77322
77376
77371
-
-
77405
77414
77433
77423
77305
77314
77333
77323
-
-
-
-
77406
77415
77434
77424
77306
77315
77334
77324
-
-
-
-
M 5 M 6 M 8 M10 M12 M16 M 5 M 6 M 8 M10 M12 M16
50/500
50/500
-
-
50/500
50/500
-
-
-
-
50/500
50/500
25/250
25/250
25/250
25/250
25/250
25/250
25/250
25/250
-
-
50/500
50/500
25/125
25/125
25/125
25/125
25/125
25/125
25/125
25/125
50/250
50/250
25/125
25/125
10/50
10/50
10/50
10/50
10/50
10/50
10/50
10/50
50/250
50/250
-
-
10/50
10/50
10/50
10/50
10/50
10/50
10/50
10/50
-
-
-
-
5/25
5/25
5/25
5/25
5/25
5/25
5/25
5/25
-
-
-
-
HBTHBTS
Zinc plated anchor with studSherardized anchor with stud
19
* Outgoing products
Zinc plated anchor with eyeboltSherardized anchor with eyeboltZinc plated anchor with forged eyeboltSherardized anchor with forged eyebolt
EB EBSEBFEBFS
HBHHBHS
Zinc plated anchor with hookSherardized anchor with hook
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
Size Thread
M 5
M 6
M 8
M10
M12
M 16
35
40
50
60
80
100
40
45
55
65
85
110
8
10
14
16
20
25
7
10
25
50
85
120
2,4
2,8
5,0
6,7
8,9
13,4
l = T instd 0 h 1h nom
mmmm Nmmm
HB..
HB..
HB..
HB..
HB..
HB..
EB..
EB..
EB..
EB..
EB..
EB..
Type Thread
M 5
M 6
M 8
M 10
M 12
M 16
M 5
M 6
M 8
M 10
M 12
M 16
35
40
50
60
80
100
35
40
50
60
80
100
40
45
55
65
90
110
40
45
55
65
90
110
8
10
14
16
20
25
8
10
14
16
20
25
-
8,0
10,0
12,5
16,0
19,0
-
10,0
11,8
14,5
17,0
-
4
6
14
27
46
100
4
6
14
27
46
100
l = T instd 0 h 1h nom
mmmm Nmmm
D
mm
* length of the screw minus length of the anchor
ES.. 5 *
ES.. 6
ES.. 8
ES.. 10
ES.. 12
ES.. 16
DForged
bolt
8
10
12
16
20
26
8
10
15
18
22
29
mm
20
METAL ANCHORSPFG ANCHORSEB AND HB
T Installation torqueinst
l Length of the anchor shield
d Drill diameter0
h Drilling depth1
t Max. Fixture thickness *fix
h Embedment depthnom
Permissible loads in kN *Tension
Forged / Standard
Installation parameters and capacities
Permissible loads in kN **Concrete C25
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
Tension Shear
3,5
4,6
8,3
13,2
19,2
22,8
Bowedbolt
* Loads are determined by the strength of the hook- / eyebolt.
Installation parameters and capacities
0,6
1,1
1,4
4,7
6,2
10,0
1,1
1,5
3,6
6,3
7,6
10,0
-
2,7
4,8
6,7
8,9
12,0
-
2,8
5,0
6,7
8,9
13,4
EB HB
** Including safety factor >3* Outgoing product
Assortiment en verpakking
METAL ANCHORS HEAVY DUTYHDP, HDS
Type
HDP
Code
HDP
Approval for Option 1 applied
Range and packages
HDP 10/0
HDP 10/10
HDP 10/25
HDP 12/0
HDP 12/10
HDP 12/25
HDP 12/50
HDP 15/0
HDP 15/10
HDP 15/25
HDP 15/50
HDP 18/0
HDP 18/10
HDP 18/25
HDP 18/50
HDP 24/10
HDP 24/25
HDP 24/50
HDP 28/10
HDP 28/25
HDP 28/50
77701
77702
77703
77704
77705
77706
77707
77708
77709
77710
77711
77712
77713
77714
77715
77716
77717
77718
77719
77720
77721
50 / 250
50 / 250
50 / 250
50 / 250
50 / 250
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
10 / 50
10 / 50
10 / 50
10 / 50
5 / 25
5 / 25
5 / 25
5 / 25
5 / 25
5 / 25
HDS
Type
HDS
HDS 10/0
HDS 10/10
HDS 10/25
HDS 12/0
HDS 12/10
HDS 12/25
HDS 12/50
HDS 15/0
HDS 15/10
HDS 15/25
HDS 15/50
HDS 18/0
HDS 18/10
HDS 18/25
HDS 18/50
HDS 24/10
HDS 24/25
HDS 24/50
HDS 28/10
HDS 28/25
HDS 28/50
50 / 250
50 / 250
50 / 250
50 / 250
50 / 250
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
25 / 125
10 / 50
10 / 50
10 / 50
10 / 50
5 / 25
5 / 25
5 / 25
5 / 25
5 / 25
5 / 25
77730
77731
77732
77733
77734
77735
77736
77737
77738
77739
77740
77741
77742
77743
77744
77745
77746
77747
77748
77749
77750
21
PackagesBox / Outer box
PackagesBox / Outer box
Weightkg/1000 pcs
Weight kg/1000 pcs
Code
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
Heavy duty anchor is available in two versions, HDP with hexagonal bolt and HDS with stud, nut and washer. These anchors are suitable for meadium heavy and heavy fixings in solid and hard materials like concrete, also cracked concrete, brick (max. M 8) and natural stone. Due to it´s powerful and controlled expansion it is suitable for heavy loads. The deforming ring guarantees that after tightening the anchor, the fixture is completely and strongly attached to the base.
HDP Heavy duty anchor with hexagonal boltHDS Heavy duty anchor with stud and nut
38,0
43,2
51,1
70,0
78,6
91,4
111,4
135,7
147,6
167,7
200,3
218,2
235,2
268,7
311,2
572,3
616,3
696,3
835,7
922,0
1035,7
38,0
43,2
51,1
70,0
78,6
91,4
111,4
135,7
147,6
167,7
200,3
218,2
235,2
268,7
311,2
572,3
616,3
696,3
835,7
922,0
1035,7
Installation parameters and capacities
Product Thread
M 6
M 6
M 6
M 8
M 8
M 8
M 8
M 10
M 10
M 10
M 10
M 12
M 12
M 12
M 12
M 16
M 16
M 16
M 20
M 20
M 20
65
75
90
75
85
100
125
90
100
115
140
105
115
130
155
160
175
200
165
180
205
70
70
70
80
80
80
80
95
95
95
95
110
110
110
110
155
155
155
165
165
165
METAL ANCHORSHEAVY DUTY
HDP, HDS
10
10
10
12
12
12
12
15
15
15
15
18
18
18
18
24
24
24
28
28
28
-
10
25
-
10
25
50
-
10
25
50
-
10
25
50
10
25
50
10
25
50
10
10
10
25
25
25
25
50
50
50
50
80
80
80
80
120
120
120
180
180
180
l t fix max T instd 0 h 1
mmmmmm Nmmm
HDP / HDS 10/0
HDP / HDS 10/10
HDP / HDS 10/25
HDP / HDS 12/0
HDP / HDS 12/10
HDP / HDS 12/25
HDP / HDS 12/50
HDP / HDS 15/0
HDP / HDS 15/10
HDP / HDS 15/25
HDP / HDS 15/50
HDP / HDS 18/0
HDP / HDS 18/10
HDP / HDS 18/25
HDP / HDS 18/50
HDP / HDS 24/10
HDP / HDS 24/25
HDP / HDS 24/50
HDP / HDS 28/10
HDP / HDS 28/25
HDP / HDS 28/50
T = installation torqueinst
l = length of the anchorshieldd = drill hole diameter0
h = drilling depth1
t = fixture thicknessfix
h = total drilling depth h + ttot 1 fix
HDP HDS
22
Permissible loads in kN* Concrete >C25
Tension Shear
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
4,5
4,5
4,5
9,4
9,4
9,4
9,4
12,3
12,3
12,3
12,3
16,7
16,7
16,7
16,7
25,2
25,2
25,2
31,0
31,0
31,0
5,5
5,5
5,5
11,7
11,7
11,7
11,7
16,0
16,0
16,0
16,0
23,0
23,0
23,0
23,0
43,5
43,5
43,5
51,0
51,0
51,0
* Testreport ER 553 01 0524
RA
SCREW ANCHORSRA, RAH
METAL ANCHORS
Range and packages
72001
72002
72003
72005
72011
100 / 1000
50 / 500
50 / 500
100 / -
100 / -
10,3
16,0
19,0
6,0
30,0
Screw anchors are developed from through bolts by equipping them with a female thread.Screw anchors are designed for “inattentive” installations due to their countersunk screw.These anchors can be installed in hard and solid embedments like concrete, solid brick and natural stone. Stainless steel anchors, RAR and RAH are delivered without screw.Screw anchors are often used in fixing doorsteps, window frames and structuresfor balcony glazing.
ProductCode
RAR, RAH
PackagesBox / Outer box
Weightkg/1000 pcs
RA 6 x 50
RA 6 x 75
RA 6 x 90
RAR 6 x 40 *
RAH 10 x 55 *
Installation parameters and capacities
M 5
M 5
M 5
M 5
M 8
0,5 / 0,75
0,5 / 0,75
0,5 / 0,75
0,5 / 0,75
1,7 / 2,0
Product
RA 6 x 50
RA 6 x 75
RA 6 x 90
RAR 6 x 40
RAH 10 x 55
* Attn. delivery without a screw
Thread l t * fix maxd 0 h nom
mm
40
65
80
40
55
6
6
6
6
10
30
30
30
30
40
Drill a hole throughthe fixture.
Turn the screw few rounds into the anchor and install it into the drillhole so that the head of the screw meets the fixture.
Expand the anchor bytightening the screw.
l Anchor length
t Fixture thicknessfix
d Drillhole diameter0
h Min. Embedment depth nom
Permissible loads in kN **Tension / Shear
Concrete > C 20
* With min. embedm. depth and standard screw** Includes a safety factor >3
30
55
70
Screw length - 3 mm
Screw length - 3 mm
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
23
mmmmmm
CONFIX
METAL ANCHORSCONFIXPKN
45 x 4,5
55 x 4,5
65 x 4,5
75 x 4,5
85 x 4,5
100 x 4,5
35 x 5 A2
45 x 5 A2
55 x 5 A2
65 x 5 A2
75 x 5 A2
85 x 5 A2
100 x 5 A2
32231
32232
32233
32234
32235
32236
32239
32240
32241
32242
32243
32244
32245
100 / 1200
100 / 1200
100 / 1200
100 / 1200
100 / 800
100 / 800
100 / 1000
100 / 1000
100 / 1000
100 / 1000
100 / 1000
100 / 1000
100 / 1000
“Concrete nails” Confix and Express nail PKN are designed for light fixings in hard materials like concrete and brick. These anchors are quick and easy to install. Drill a hole through the fixture and hit the nail with a hammer into the hole. Because of a fully metallic construction these fixings are suitable in situations,where fire resistance is required. The stainless steel Confix is suitable also for outdoor use and for use in moderately heavy corrosion athmosphere.
PKN
Confix
6,8
8,2
9,7
11,0
12,6
15,4
7,8
8,1
9,7
11,1
12,7
14,1
17,1
l tfix maxd 0 h nom
mm mmmm mm
45
55
65
75
85
100
35
45
55
65
75
85
100
5
5
5
5
5
5
5
5
5
5
5
5
5
30
30
30
30
30
30
30
30
30
30
30
30
30
15
25
35
45
55
70
5
15
25
35
45
55
70
h1
40
40
40
40
40
40
40
40
40
40
40
40
40
mm
Permissible loads *Tension / shear
Concr. C 25 Concr. C 40
kN
0,4 / 1,7
0,4 / 1,7
0,4 / 1,7
0,4 / 1,7
0,4 / 1,7
0,4 / 1,7
0,4 / 1,7
0 4 / 1,7
0,4 / 1,7
0,4 / 1,7
0,4 / 1,7
0,4 / 1,7
0,4 / 1,7
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
1,0 / 2,1
Range, packages, installation parameters and capacities
6 x 30
6 x 60
6 x 80
8 x 70
8 x 90
8 x 110
8 x 130
8 x 150
72502
72506
72503
72504
72505
72507
72508
72509
200 / 2000 / 96000
200 / 2000 / 70000
200 / 2000 / 48000
100 / 1000 / 35000
100 / 1000 / 24000
100 / 1000 / 24000
100 / 1000 / 24000
100 / 1000 / 24000
PKN
2,9
5,7
7,5
10,9
14,2
17,5
20,2
23,4
l tfix maxd 0 h nom
mm mmmm mm
30
60
80
70
90
110
130
150
6
6
6
8
8
8
8
8
27
30
30
40
40
40
40
40
3
30
50
30
50
70
90
110
h1
35
40
40
50
50
50
50
50
mm kN
0,5 / 0,3
0,5 / 0,3
0,5 / 0,3
0,7 / 0,6
0,7 / 0,6
0,7 / 0,6
0,7 / 0,6
0,7 / 0,6
* Including safety factor >4
* SITAC 2629/93
ProductCode PackagesBox / Outer box
Weightkg/1000 pcs
ProductCode PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Range, packages, installation parameters and capacities
Permissible loads *Tension- / shearConcrete > C 25
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7. Official approvals on page 9.
24
l total lengthd drill hole diameter0
h drilling depth1
h min. setting depthnom
t fixture thicknessfix
KRH
FRAME ANCHORSKRH, SKRH
METAL ANCHORS
KRH 10 x 72
KRH 10 x 92
KRH 10 x 112
KRH 10 x 132
KRH 10 x 152
KRH 10 x 182
KRH 10 x 202
75860
75861
75862
75863
75864
75865
75866
100 / 500 / 14000
100 / 500 / 14000
100 / 500 / 14000
100 / 500 / 14000
50 / 250 / 7000
25 / 250 / 10500
25 / 250 / 10500
SKRH
Install the adjustable frame screw into the structurethrough the pre drilled hole in the frame by using the setting tool (page 48).
30,6
37,1
43,9
51,3
58,7
66,7
71,4
l t fix maxd 0 h nom
mm mmmm mm
72
92
112
132
152
182
202
10
10
10
10
10
10
10
30
30
30
30
30
30
30
42
62
82
102
122
152
172
Range and packages
ProductCode PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
SKRH 7 x 70
SKRH 7 x 90
SKRH 7 x 120
SKRH TOOL
75850
75851
75852
75855
200
200
200
10
25,4
30,0
39,5
16,7
Range and packages
ProductCode PackagesBox
Weightkg/1000 pcs
The frame can be adjustedin and out from the structureby using the other end ofthe setting tool.
The frame anchor KRH is designed for fixing wooden and metallic window and door frames. Suitable fixing bases are hard materials like concrete, solid- and hollow brick.Due to KRH´s fully metallic construction, it is very usable e.g. infire proof fixings like fire doors with metallic frames.
The adjustable frame screw SKRH is designed for fixing woodenwindow and door frames. SKRH consists of two elements, the body, a twin screw, and the adjusting element. SKRH is installed as an assembly through the pre drilled hole of the frame, with a suitable fastener into the structure by using a setting tool. After installing the screw, the frame can be adjusted by using the other end of the setting tool. The pre drilled hole diameter shall be 13 mm in soft wood and 14 mm in hard wood.
25
KEM
KEM
Break loadstension in kN *
Concrete >C25Steel 5.8 / SS 316
T inst max
* Safety factor not included. This is depending on conditions and situation in use. See page 27.
26
CHEMICAL ANCHORS
PackagesBox / Outer box
Weightkg/1000 pcs
Code Size
d = drillhole diameter0
h = drillhole depth1
h = setting depthnom
t = fixture thicknessfix
T = setting torqueinst
Drill a hole acc. to information in table above.Diamond drilled holes must be coarsed.
Clean the hole properly from drilling dust witha brush or airblow. It is not recommendedto clean the hole with water.
Insert the capsule in the hole. Ensure that the liquid inside the capsule is moving when thecapsule is handwarm.
Install the stud into the hole by using a drillingmachine with impact. Use the setting tool (page 48).
Observe the curing- and gel time neededbefore putting load on the anchor.Mount the fixture and tighten the nut toright torque shown in the table above.
Curing time
20 min.
30 min.
60 min.
5 hours
+20
+10
0
-5OC
Base materialtemperature
KEM, a chemical anchor for threaded studs and bars. As other chemical anchors, fastening the KEM creates no strain in the embedment, so installations close to edge are allowed. KEM bears slightly also dynamic loads.
Attention !Installation in a wet
hole will double the curing time.
Size d 0
mm
h = h1 nom t fix max
mm mm Nm
18 / 23
29 / 31
42 / 44
64 / 64
120 /120
166 / 166
277 / 277
18
25
34
45
55
55
55
6
12
20
45
100
150
300
80
90
110
125
170
210
280
10
12
14
18
25
28
35
M 8
M 10
M 12
M 16
M 20
M 24
M 30
KEM 8
KEM 10
KEM 12
KEM 16
KEM 20
KEM 24
KEM 30
Installation parameters and capacities
Stud
72308
72310
72312
72316
72320
72324
72330
11,8
14,6
25,0
38,0
121,7
161,6
400,0
10 / 500
10 / 500
10 / 200
10 / 200
6 / 60
6 / 60
6 / 30
KEM 8
KEM 10
KEM 12
KEM 16
KEM 20
KEM 24
KEM 30
Range and packages
CHEMICAL ANCHORS
STUDS
PackagesBox / Outer box
CodesSize
KEVA5.8
Zinc plated
VSS5.8
Zinc plated
VSS, VKS, VH
The studs for KEM are available in different steel qualities and coatings.KEVA, steel 5.8, zinc plated, equipped with hexagonal grip for setting tool.VSS, steel 5.8, zinc plated, flat end.VKS, steel 5.8, hot dip galvanized, flat end.VH, stainless steel grade AISI 316 (A4), flat end.Special materials and dimensions on request.
VHAISI 316Stainless
steel
VKS 5.8
Hot dipgalvanized
Conditions in use Recommendedfactor
Safety factors
2,5 - 3
3,5 - 4
3,5 - 4
3,5 - 4
4 - 5
4 - 5
4 - 5
Reinforced concrete, static loads in compressive zone
Concrete subjected to vibratory loads
Polluted areas
Tensile zone of the concrete structure
Severe weather conditions, cold-wet-warm-cold
Underwater installation
Earthquake areas
For capsules
Size Code
27
KEVA
Range and packages
72627
72628
72631
72636
-
-
-
-
72660
72661
72663
72664
72666
72668
72679
72680
72681
72683
72684
72686
72688
8 x 110
10 x 130
12 x 160
16 x 190
20 x 260
24 x 300
30 x 360
72308
72310
72312
72316
72320
72324
72330
KEM 8
KEM 10
KEM 12
KEM 16
KEM 20
KEM 24
KEM 30
10 / 500
10 / 500
10 / 200
10 / 200
6 / 60
6 / 60
6 / 30
-
-
-
-
72654
72656
72658
VSS, VKS, VHKEMLA
CHEMICAL ANCHORS
KEMLAVSS, VKS, VH
PackagesBox / Outer box
Weightkg/1000 pcs
KEMLA, the hammer capsule is a chemical anchor for threaded studs and rebars (reinforcment bars). KEMLA is easy to install, no special tools are needed, just drill a hole, insert the capsule and hammer the stud in. As other chemical anchors, fastening the KEMLA creates no strain in the embedment, so installations close to edge are allowed. KEMLA bears slightly also dynamicloads.
72360
72361
72362
72363
KEMLA 10
KEMLA12
KEMLA16
KEMLA20
Code
13,6
25,0
40,0
100,0
10 / 500
10 / 200
10 / 200
6 / 60
M 10
M 12
M 16
M 20
Size Permissible loads in kN
100
120
160
200
Stud d 0 s
mm
h = h1 nom
mm mmConcrete >C25
12
14
18
25
Size PackagesBox
Weightkg/1000 pcs
10 x 130
12 x 160
16 x 190
20 x 260
72628*
72631*
72636*
72654
Codes
76,0
126,0
275,0
586,0
Installation parameters and capacities
10
10
10
6
Size
KEVA/VSS VKS
KEMLA 10
KEMLA 12
KEMLA 16
KEMLA 20
Nm
Range and packages
5,6
7,0
11,9
18,9
d = drillhole diameter0
h = drillhole depth1
h = setting depthnom
t = fixture thicknessfix
T = setting torqueinst
c = edge distance min.cr
Drill a hole acc. to information in the table above. Diamond drilled holes must be coarsed.
Clean the hole properly from drilling dust witha brush or airblow. It is not recommendedto clean the hole with water.
Insert the capsule in the hole. Ensure that the liquid inside the capsule is moving when thecapsule is handwarm.
Hammer the stud or rebar into the hole and turn it few rounds by hand to mix and spread the resin.
Observe the curing time needed before putting load on the anchor.Mount the fixture and tighten the nut toright torque shown in the table above.
Attention !Installation in a wet hole will double the
curing time.
1 hour
2 hours
5 hours
10 hours
+20
+10
0
-5OC
Base materialtemperature
VH
for studd 0 R
mm
13
15
20
25
for rebarStud Rebar
8,0
10,0
17,0
27,0
+
The studs for KEMLA are available in three different protections against corrosion. KEVA / VSS, steel zinc plated, VKS, steel,hot dip galvanized and VH, stainless steel. The dimensioning ofthe studs is designed for standard one capsule installations.
Curing time
Range and packages
28
12
20
45
100
t fix maxstandard stud
20
28
15
42
T inst max
72660
72661
72663
72664
72680
72681
72683
72684
ccr
110
135
155
210
mm
* KEVA
ITH, IPU, ISL
CHEMICAL ANCHORS
INJECTION RESINITH RANGE
M 8
M 10
M 12
M 16
M 20
6
12
20
45
100
Permissible loads in kN *
80
90
110
125
170
d 0
mm
h = h1 nom
mm Concrete >C20
10
12
14
18
22
Installation parameters and capacities
T inst max
Nm
3,4
4,9
6,8
9,8
14,8
Drill a hole acc. to information in the table below.Diamond drilled holes must be coarsed.
Clean the hole properly from drilling dust with a brush or airblow. It is not recommended to clean the hole with water. A wet hole will double the curing time.
Inject resin into the hole. Fill the hole up to 1/3.
Install the stud into the hole and turn it few times to spread the resin evenly around the stud.
Observe the curing- and gel times before putting load on the anchor. Mount the fixture and tighten the nut to right torque shown in the table below.
Curing timeGel time
4 min.
6 min.
25 min.
45 min.
+20
+10
0
-5OC
Base materialtemperature
Stud size
Range and packages
ITH 150 *
ITH 345
IPU 345
IPU 150
ISL
IOV 6-8
IOV 10-12
IOV 10-12
IOV 16
ISH 6-8
ISH 10-12
ISH 16
IPUM
ProductCode
72600
72613
72619
72620
72603
72604
72605
72606
72607
72615
72617
72618
72621
340,0
707,0
1100,0
750,0
8,6
0,9
2,3
3,2
3,5
47,0
63,0
89,6
236
PackagesBox / Outer box
Weightkg/1000 pcs
* includes a safety factor 5
d = drillhole diameter0
h = drillhole depth1
h = setting depthnom
T = setting torqueinst
45 min.
80 min.
3 hours
6 hours
Injection resin ITH and it´s hardener are extruded simultaneously from the cartridge. Resin andhardener are mixed in the nozzle to a ready-to usestuff to be injected into a cleaned drillhole.Gel- and curing times must be observed when workingwith ITH. When working in hollow constructions it isrecommended to place perforated sleeves IOV or ISH intothe hole before injecting the resin.
IOV, a perforated sleeve made ofplastic material.
ISH, a perforated tube (length 1 m) made ofsteelwire net.
IOV
ISH
IPUM
IPUM, a blow-out pump to cleanthe drillhole from dust.
29
ITH 345 Styrene free vinylester resin, 345 ml cartridgeITH 150 Styrene free polyester resin, 150 ml cartridge
10 / -
10 / -
1 / -
1 / -
10 / -
50 / 250
25 / 125
25 / 125
25 / 125
1 / 50
1 / 50
1 / 25
1 / -
* Is delivered with an adaptor and a nozzle
LIGHT FIXINGS
Range, packages and assembly data
NAT 5
NAT 6
NAT 8
NAT 10
NAT 12
75005
75006
75008
75010
75012
100 / 5000 / 300000
100 / 3000 / 180000
100 / 2000 / 112000
50 / 1000 / 56000
25 / 500 / 28000
0,3
0,6
1,4
2,6
4,4
25
30
40
50
60
5
6
8
10
12
2,5 - 4,0
3,5 - 5,0
4,5 - 6,0
6,0 - 8,0
8,0 - 10,0
0,6 / 0,5
0,9 / 0,8
1,4 / 1,2
2,4 / 1,7
3,3 / 2,1
Size Permissible loadsTension in kN *
Suitable screw
Concrete / Brick
NAT 8 L
NAT 10 L
75009
75011
50 / 1000 / 56000
25 / 500 / 28000
2,0
4,0
65
80
8
10
4,5 - 6,0
6,0 - 8,0
3,6 / 4,0 / 2,7
5,0 / 7,2 / 3,7
Brick / Concrete / Light grovel
NAT L
NAT
Code
NYLON PLUGSNAT, NAT L
A plug made of polyamide for light fixings.oTemperature range in use -40 ... +80 C.
Drill diameter = d , min drilling depth = l + 5 mm.o
Suitable screw length = 0,8 - 1 x pluglength (l) + fixture thickness.
A plug made of polyamide for light fixings. Due to the long expanding zone NAT L is suitable for use also in porous materials like aerated concrete, light grovel and hollow brick.
oTemperature range in use -40 ... +80 C.Drill diameter = d , min drilling depth = l + 5 mm.o
Suitable screw length = 0,8 - 1 x pluglength (l) + fixture thickness.
Range, packages and assembly data
SizeCode
* Capacities are achieved with using max. screw size, a safety factor of >3 is included.
Restrictions of use (spacings and edge distances) on page 6.Materials and coatings on page 7.
l d 0
mm mm
PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
l d 0
mm mm
Permissible tension loads in kN *
* Capacities are achieved with using max. screw size, a safety factor of >3 is included.
Suitable screw
Ø mm
Ø mm
75640
75642
5/35
5/45
200 / 2000
200 / 2000
Ø mm
Product Codes
LIT
LIT Yellow Brown
75641
75643
White
75644
75646
Black
75645
75647
Grey
75648
75649
3,0
3,6
diameter depth inbase
Fixturethickness
5,0
5,0
min. mm
30
30
max. mm
5
15
Drilling
LIT is a plug made of Polyamide, designed for light fixings. When LIT is assembled, the head of the nail covers the head of the plugwhich will be invisible. That is why LIT is very much used in baseboardsand covering strips. LIT is delivered with preassembled nails in variouscolours.
PackagesBox / Outer box
Weightkg/1000 pcs
Range, packages and assembly data
30
A nail plug LYT is a pre assembled, ready to install anchor for light fixings in hard bases like concrete, brick and natural stone.LYT is a real “Speedplug” in through fixings. Just drill a hole through the fixture, hammer the plug in, and the fixing is ready.The plug part of the anchor is made of Polyamide, which gives the anchor a good and a durable grip in the base material.The hardened steel nail is coated with zinc plating. The head of the nail has a Pozidive slot for dismounting of the anchor.
LIGHT FIXINGS NAILPLUGLYT
31
UK KP countersunk head, yellow passivated nailLK SP pansunk head, bright passivated nailLK RST pansunk head, stainless steel (A2) nail
LYT
l *
tfix maxd 0 h nom
mm
htot
Size Codes PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Installation parameters and capacities
Permissible loads **in kN
Tension- / shearConcrete > C 25
UK KP LK SP LK RST
Range and packages
5/30
5/40
5/50
6/40
6/60
6/80
8/60
8/80
8/100
8/120
8/140
8/160
75658
75659
75660
75661
75662
75665
75663
75664
75610
75611
75612
75678
75680
75681
75679
75682
75683
75684
75685
75686
75691
75692
75693
75694
200 / 2000 / 60000
200 / 2000 / 60000
200 / 2000 / 48000
200 / 2000 / 48000
200 / 2000 / 48000
100 / 1000 / 24000
100 / 1000 / 24000
100 / 1000 / 24000
100 / 1000 / 24000
100 / 500 / 11000
100 / 500 / 11000
100 / 500 / 11000
2,3
3,0
3,6
3,6
5,5
7,2
8,9
11,6
14,8
17,3
20,5
24,0
Size
mm mmmin.mmmm
* with min. h nom** includes a safety factor >3
5/30
5/40
5/50
6/40
6/60
6/80
8/60
8/80
8/100
8/120
8/140
8/160
30
40
50
40
60
80
60
80
100
120
140
160
0,2 / 0,3
0,3 / 0,4
0,3 / 0,4
0,5 / 0,6
0,5 / 0,6
0,5 / 0,6
0,8 / 1,0
0,8 / 1,0
0,8 / 1,0
0,8 / 1,0
0,8 / 1,0
0,8 / 1,0
5
5
5
6
6
6
8
8
8
8
8
8
35
50
60
50
70
90
70
90
110
130
150
170
25
30
30
30
30
30
40
40
40
40
40
40
5
10
30
10
30
50
20
40
60
80
100
120
LYT LK SPLYT UK KP
KAT N
KAT
KAT, KAT N FACADE PLUGS
Facade plug KAT is like a 10 mm Nylon plug with extended shaft.KAT is designed for through fixings in hard embedments like concrete and brick. Due to the long shaft, KAT is very suitable in fixing thick fixtures like frames and understructures made of plank.KAT screws are available in three head types, Pz4, 6-lobe (T40) andHexagon. Pz4 is zinc plated. T40 and hexagon types are available in zinc plated and hot dip galvanized.
Range and packages
Size PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Code
KAT 10 x 80
KAT 10 x 100
KAT 10 x 115
KAT 10 x 135
KAT 10 x 160
80
100
115
135
160
2,0
2,0
2,0
2,0
2,0
Size Permissible tension loads in kN *
10
10
10
10
50
50
50
50
50
60
60
60
60
60
Installation parameters and capacities
KAT 10 x 100 N
KAT 10 x 115 N
KAT 10 x 135 N
KAT 10 x 160 N
l d 0
mm mm
h1 hnom t fix max
mm mm mm
30
50
65
85
110
Concrete Light grovel Aerated concrete
-
-
-
-
-
-
-
-
-
-
1,5
1,5
1,5
1,5
0,7
0,7
0,7
0,7
100
115
135
160
90
90
90
90
80
80
80
80
20
35
55
80
Facade plug KAT N is like KAT but with a long expanding zone. KAT N is designed for fixings in porous materials like aerated concrete, light grovel and hollow brick.KAT N screws are available in the same types as KATscrews.
* includes a safety factor >3
10
10
10
10
10
32
HEX KSHEXT40 KSPZ 4
KAT 10 x 80
KAT 10 x 100
KAT 10 x 115
KAT 10 x 135
KAT 10 x 160
75874
75875
75876
75877
75878
22,5
30,1
34,3
43,1
50,8
50 / 500 / 12000
50 / 500 / 12000
50 / 500 / 12000
50 / 500 / 12000
50 / 500 / 12000
75883
75884
75885
75886
75887
75831
75832
75833
75834
75835
75840
75841
75842
75843
75844
T40
75801
75802
75803
75804
75805
HEX KSHEXT40 KS
30,1
34,3
43,1
50,8
50 / 500 / 12000
50 / 500 / 12000
50 / 500 / 12000
50 / 500 / 12000
75879
75880
75881
75882
75888
75889
75890
75891
75836
75837
75838
75839
75845
75846
75847
75848
KAT 10 x 100 N
KAT 10 x 115 N
KAT 10 x 135 N
KAT 10 x 160 N
T40PZ 4
75807
75808
75809
75810
Size Code PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Range and packages
Range, packages and assembly data
KBT 4
KBT 6
KBT 8
KBT 10
75104
75106
75108
75110
25 / 500 / 28000
25 / 500 / 28000
25 / 300 / 8400
25 / 300 / 8400
3.5
3.6
5.9
8.4
50
50
60
70
10
10
12
14
4,0 - 4,5
5,0 - 6,0
7,0 - 8,0
9,0 - 10,0
0,2 / 0,3 / 0,4
0,2 / 0,3 / 0,4
0,4 / 0,6 / 0,7
0,6 / 0,9 / 1,0
Size Permissible tensionloads in kN *
Suitable screws **
Aerated concrete400 / 450 / 500
3kg/m
KBTM
KBT
Code
KBT, KBTM
A nylon anchor, KBT, is designed for light fixings in aerated concrete.A coarse thread on the outside of the anchor gives it a good gripin the base material. Suitable screws for KBT are wood-, universal- and machine threaded screws.
oTemperature range in use -40 ... +80 C.
* Capacities are achieved with using max. screw size. A safety factor of >3 is included.
l d 0
mm mm
PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
h 1
60
60
70
80
Universal
Ø mm
Machine
M 4
M 6
M 8
M 10
Range, packages and assembly data
50
60
70
10
12
14
0,9
1,2
2,0
Size Permissible tension loads in light grovel
kN *
Suitable screwCode
* a safety factor of >3 is included.
l d 0
mm mm
PackagesBox / Outer box
Weightkg/1000 pcs
h 1
60
70
80
Dim.
M 6
M 8
M 10
75116
75118
75120
KBTM 6
KBTM 8
KBTM 10
25 / 250
25 / 250
25 / 250
29,1
36,1
56,0
Length
20 + t fix
25 + t fix
30 + t fix
mm
** Suitable length 0,8 - 1,0 x l + t fix
Drill a hole acc. to instructions in the tables above.
Insert the anchor by using a setting tool (see page 48).
Attach the fixture with a suitable screw.See screw dimensions in the tablesabove.
mm
A metallic alternative, KBTM, is also designed for light fixings in aeratedconcrete, but can also well be installed in light grovel base.KBTM is used in dense types of aerated concrete, and in situationswhere fire resistance is required.KBTM is made of zinc alloy Zn Al4 Cu1.Suitable screws for KBTM are machine threaded screws.
NYLON ANCHORS
33
mm
DRIVA METALDRIVA
DRIVA, DRIVA MMOLA
DRYWALLANCHORS
Range and packages
Code
Driva
Driva metal
Driva metal P *
75921
75920
75930
Driva is designed for light fixings in plasterboard. Mounting a Driva does not require any special tools, just a cross headed screw-driver is enough.A metallic alternative, Driva M, is can be used also in extra hard plasterboards, chipboards and in fire proof installations.Driva anchors are supplied with screws.
100/1000/48000
100/1000/48000
100/1000/48000
Product
MOLA
9
9
9
12
12
27
Range and packages
MOLA 4/13
MOLA 5/13
MOLA 5/26
MOLA 6/13
MOLA 6/26
75702
75706
75707
75710
75711
50/500/38000
50/500/38000
50/500/24000
50/500/24000
50/500/24000
Install the anchor by turningit with screwdriver.
Attach the fixture with a screw.
MOLA
Assembly data and capacities
MOLA 4/13
MOLA 5/13
MOLA 5/26
MOLA6/13
MOLA 6/26
Product Max.fixture
thickness *
3 / 13
6 / 13
14 / 26
6 / 13
14 / 26
7
10
10
11
11
Permissible loads in kN **
Plywood4 mm
Chipboard12 mm
0,2
0,2
0,2
0,2
0,2
0,3
0,3
0,3
0,3
0,3
M 4
M 5
M 5
M 6
M 6
Mola is a fully metallic anchor for light fixings in sheet- andcavity constructions.Mola is quick and easy to install. Tightening of the anchor isdone with a screwdriver or with special pliers (see page 48).
mm
Thread
mm
Mountinghole Ø
mm
Sheetthicknessmin./max.
mm
Sheetthickness
min.
mm
Max.fixture
thickness
mm
* With max. sheet thickness
* With a long screw
4,5
6,3
6,9
8,1
11,9
14,8
14,1
20,0
Drill a hole and insert the anchor into the hole.
Tighten the anchor with a screwdriver or with assembly pliers (see page 48).
Open the screw and attachthe fixture with it.
PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Code Product
** includes a safety factor >3
34
12
15
28
15
28
Range, packages and assembly data
YLT 6
YLT 8
YLT 10
75210
75211
75212
150 / 3000 / 168000
100 / 2000 / 48000
50 / 1000 / 24000
0,5
1,6
3,0
30
50
60
6
8
10
3,0 - 4,5
3,5 - 6,0
6,0 - 8,0
0,25 / 0,2 / 0,25 / 0,2
0,8 / 0,8 / 0,3 / 0,25
0,5 / 0,6 / 0,8 / 0,25
Size Permissible tension loads in kN *Suitable screw
Concrete / Brick / Chipboard / Plasterboard
OLA75201 50 / 1000 / 24000 5,8
Plasterboard
YLT
OLA
Code
OLAYLT
OLA, only one anchorsize needed for fixing in various thicknesses of sheet formed structures. Due to it´s unique construction OLA gives an excellent grip in all sheet thicknesses from 12 mm upwards. OLA works also in solid material. The locking mechanism in OLA protects fom over tightenig the screw.Ola has a very good durability. The raw material used in OLA hasan excellent tolerance against strain and it does not react to moisture.Ola is delivered with a 4 x 60 screw.
A universal plastic plug made of gray polyethene for light fixings.YLT can be used in almost any kind of structures, sheet formed, hollowand solid materials. In solid materials YLT acts like any normal plug.In hollow materials and in sheet formed structures YLT builds a knotin the free space when the attaching screw is tightened.Suitable screws are wood- and universal screws. Suitable screwlength is pluglength l + fixture thickness.
Range, packages and capacities
ProductCode
* Capacities are achieved with using max. screw size, a safety factor of >3 is included.
l d 0
mm mm
PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
PackagesBox / Outer box / Pallet
Weightkg/1000 pcs
Permissible loads in kN *
* a safety factor of >3 is included.
OLA
1 sheetTension / Shear
2 sheetTension / Shear
Drill a holeØ 10 mm.
Insert OLA into the hole.
One sheetassembly.
Assemblyin solidmaterial.
Two sheetassembly.
Drill a hole acc. to the table below.
Insert YLT into the hole. Attach the fixture witha suitable screw.
Ø mm
DRYWALLANCHORS
35
l = plug length
d = drillhole diameter 0
0,25 / 0,40 0,35 / 0,55
DRILL BITSSDS+ DRILLS
51688
51739
51601
51657
51692
51602
51662
51603
51604
51605
51694
51667
51606
51607
51608
51609
51610
51611
51612
51652
51653
51672
51613
51614
51659
51615
51616
51673
51617
51618
51663
51619
51620
51621
51622
51674
51623
51624
51658
51625
51626
51691
51675
51627
51676
51628
51629
51695
51630
51631
51668
51724
51632
51696
51633
51634
51635
51679
51636
51637
51638
51639
51640
51680
4x110
4x160
5x110
5x160
5x210
5,5x110
5,5x160
6x110
6x160
6x210
6x260
6x310
6,5x110
6,5x160
7x110
7x160
8x110
8x160
8x210
8x260
8x310
8x400
9x160
9x210
10x130
10x160
10x210
10x260
10x310
10x450
10x600
50
100
50
100
150
50
100
50
100
150
200
250
50
100
50
100
50
100
150
200
250
340
100
150
70
100
150
200
250
390
540
10
10
10
10
10
10
10
10
10
10
2
2
10
10
10
10
10
10
10
2
2
1
10
10
10
10
10
2
2
1
1
32
36
36
41
48
36
43
38
45
54
62
70
40
49
42
52
44
56
70
80
93
124
64
81
61
72
93
108
130
205
260
11x160
11x310
12x160
12x210
12x260
12x310
12x450
12x600
13x160
14x160
14x210
14x260
14x310
14x450
15x160
15x210
15x260
15x310
15x450
15x600
16x160
16x210
16x260
16x310
16x450
16x600
16x800
17x200
18x200
18x300
18x450
18x600
18x800
10
2
10
10
2
2
1
1
10
10
10
2
2
1
10
10
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
85
145
92
116
137
170
248
312
94
114
160
166
210
283
130
170
210
255
374
474
130
173
215
260
380
479
640
162
200
300
440
620
824
100
250
100
150
200
250
390
540
100
100
150
200
250
390
100
150
200
250
390
540
100
150
200
250
390
540
740
140
140
240
390
540
740
Code SDS + SDS +
SDS+ range
SDS+
SDS+ drills are designed for rotary hammers in professional use. The hardened shaft is made of high class tempering steel. This ensures a long durability against wearing. The shape of the flute is optimized to remove the drilling dust effectively. A precise attachment of the carbide tip in the body is done with bronze soldering.
Weightkg/1000 pcs
Weightkg/1000 pcs
Code Drillingdepth
mm
Minimumdelivery
pcs
Minimumdelivery
pcs
Drillingdepth
mm
36
DRILL BITS SDS+ DRILLSSDS MAX DRILLS
51420
51421
51422
51423
51424
51425
51426
51427
51428
51429
51430
51431
51432
51433
51434
51435
51436
51437
51438
19x200
20x200
20x300
20x450
20x600
20x800
22x250
22x450
22x600
22x800
150
150
250
400
550
750
200
400
550
750
1
1
1
1
1
1
1
1
1
1
205
255
365
520
690
920
320
630
840
1120
25x320
25x520
25x920
28x370
28x570
28x670
30x370
30x570
32x370
32x570
32x920
35x370
35x570
35x670
38x370
38x570
40x370
40x570
40x920
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
200
400
800
250
450
550
250
450
250
450
800
250
450
550
250
450
250
450
800
51641
51642
51643
51644
51645
51681
51646
51647
51665
51670
12x340
12x540
12x690
14x340
14x540
15x340
15x540
16x340
16x540
18x340
18x540
20x320
20x520
20x920
22x320
22x520
22x920
24x320
24x520
51401
51402
51403
51404
51405
51406
51407
51408
51409
51410
51411
51412
51413
51414
51415
51416
51417
51418
51419
200
400
550
200
400
200
400
200
400
200
400
200
400
800
200
400
800
200
400
200
400
200
400
550
200
400
1
1
1
1
1
1
1
410
710
410
710
948
410
710
51648
51649
51650
51651
51685
51677
51678
24x250
24x450
25x250
25x450
25x600
26x250
26x450
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
260
420
500
360
500
400
540
420
640
470
690
500
820
1270
550
860
1520
600
950
600
950
1650
810
1250
1420
900
1360
1030
1500
2400
1120
1740
2000
1200
1950
1360
2110
3670
SDS+ range
SDS Max range
SDS MAX
Code SDS + SDS +Weightkg/1000 pcs
Weightkg/1000 pcs
Code Drillingdepthmm
Minimumdelivery
pcs
Minimumdelivery
pcs
Drillingdepth
mm
Code SDS Max SDS MaxWeightkg/1000 pcs
Weightkg/1000 pcs
Code Drillingdepth
mm
Minimumdelivery
pcs
Minimumdelivery
pcs
Drillingdepth
mm
SDS Max drills are designed for big rotary hammers in professional use. The hardened shaft is made of high class tempering steel. This ensures the drill a long durability against wearing. The shape of the flute is optimized to remove the drilling dust effectively. A precise attachment of the carbide tip in the body is done with bronze soldering. Dimensions Ø 12 - 15 mm are with 2-cutting tip and dimensions Ø 16 - 40 mm are with 4-cutting tip.
37
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENTDRILL BITSIP, EIP
SDS+ TOOLS
IP 4x75
IP 5x85
IP 5,5x95
IP 6x100
IP 8x120
IP 10x120
IP 12x150
EIP 6x200
EIP 8x200
EIP 10x200
EIP 12x200
EIP 14x200
3,5
4,0
4,5
5,0
6,5
8,0
9,0
5,0
6,0
8,0
9,0
9,5
10
10
10
10
10
10
10
5
5
5
5
5
6,0
8,7
11,4
12,1
25,4
28,0
67,0
31,0
45,0
65,0
106,0
119,0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
50001
50002
50003
50004
50005
50006
50007
50101
50103
50106
50109
50112
PVLS 51 core bit Ø 35 mm
PVLS 52 core bit Ø 50 mm
PVLS 53 core bit Ø 66 mm
PVLS 54 core bit Ø 80 mm
PVLS 55 core bit Ø 90 mm
PVLS 56/61 adapter/center drill
PVTS 58 pointed chisel 250 mm
PVTS 59 flat chisel 250/20 mm
PVTS 60 gouging chisel 250/22 mm
PVL 10 chuck Ø 1,5-13 mm
PVL 11 adapter for chuck
PVL 15 dustholder
SDS+ trimming drill Ø 14/31 x 95
KBT 8 drill
53151
53152
53153
53154
53155
53157
53158
53159
53160
53110
53111
53115
51693
79133
225,0
402,0
504,0
686,0
840,0
125,0
295,0
294,0
351,0
504,0
52,0
35,0
212,0
209,0
IP and EIP range
SDS+ special drills and accessories
Product
SDS+ tools
Minimumdel.qty
pcs
Weightkg/1000 pcs
Chuckend Ø
mm
Code
Code
Usablelength
mm
40
45
50
55
65
65
85
150
150
150
150
150
PVTS 58
PVTS 59
PVTS 60
PVL 11PVL 10
PVLS 56/61
PVLS
IP
EIP
Special tools for machines with SDS+ chuck.
IP Masonry drills with cylindrical shaftEIP Long masonry drills with cylindrical shaft
Weightkg/1000 pcs
Minimumdel.qty
pcs
638
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
ROTARY HAMMERACCESSORIES
SDS MAXTOOLS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PVL 40 core bit Ø 40 mm
PVL 50 core bit Ø 50 mm
PVL 66 core bit Ø 66 mm
PVL 80 core bit Ø 80 mm
PVL 90 core bit Ø 90 mm
PVL 100 core bit Ø 100 mm
Adapter 195 mm
Adapter 450 mm
Drift key
Center drill KV-0 10x160
Pointed chisel 400 mm
Pointed chisel 600 mm
Flat chisel 400/25 mm
Flat chisel 600/25 mm
Gouging chisel 300 mm
Drag chisel 400/50 mm
Drag chisel 300/80 mm
53140
53150
53166
53180
53190
53196
53210
53211
53220
51005
53202
53203
53205
53206
53207
53208
53209
350,0
400,0
926,0
1282,0
1427,0
1800,0
380,0
1140,0
50,0
92,0
710,0
1200,0
730,0
1200,0
570,0
790,0
780,0
Range
ADAPTER
SDS Max tools
SDS Max tools are designed for use in big rotary hammers in professional use.The tools are manufactured from high quality tempering steel. This guarantees a long durability against wearing. Chiseling goes smoothly, without compressed air.A large range of core bits make also big holes possible without extra machines.
Code Min.deliveryquantity
pcs
Weightkg/1000 pcs
PVL CORE BITDRIFTKEY
POINTED FLAT
GOUGING
DRAG
39
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENTBANDINGKVA, KVAH, PVA
PVAH, PVAM, LVA
56012
56011
56017
56020
56019
56018
56025
56024
56101
56102
56212
56210
56214
56215
56217
56216
56219
56220
56226
56225
56227
56233
56312
56317
56326
56612
56617
56626
56417
56702
KVA 12x0,75
KVA 12x0,75
KVA 19x0,75
KVA 19x0,75
KVA 19x1,00
KVA 19x1,00
KVA 25x1,00
KVA 25x1,00
KVAH 19x1,00
KVAH 25x1,00
PVA 12x0,75
PVA 12x0,75
PVA 12x1,00
PVA 12x1,00
PVA 17x0,75
PVA 17x0,75
PVA 17x1,00
PVA 17x1,00
PVA 26x1,00
PVA 26x1,00
PVA 26x1,25
PVA 33x1,50
PVAM 12x1,00
PVAM 17x1,00
PVAM 26x1,25
PVAH 12x1,00
PVAH 17x1,00
PVAH 26x1,00
PVAL 17x1,00
LVA
30 / 300 / 14400
10 / 200 / 9600
30 / 180 / 8100
10 / 150 / 7200
30 / 180 / 6490
10 / 150 / 7200
30 / 150 / 5400
10 / 100 / 3600
10 / 150 / 7200
10 / 100 / 3600
30 / 300 / 13500
10 / 200 / 9600
30 / 300 / 10800
10 / 200 / 9600
30 / 210 / 10080
10 / 150 / 7200
30 / 210 / 7560
10 / 150 / 7200
30 / 150 / 5400
10 / 100 / 4800
30 / 150 / 3600
30 / - / 1500
10 / 200 / 9600
10 / 150 / 7200
10 / 100 / 3600
10 / 200 / 9600
10 / 150 / 7200
10 / 100 / 4800
30 / 210 / 10080
20 / 240 / 6720
49,1
49,1
78,5
78,5
101,0
101,0
163,0
163,0
112,1
164,5
48,8
48,8
66,4
66,4
62,0
62,0
88,0
88,0
150,1
150,1
175,6
287,0
70,0
98,8
195,4
68,8
103,8
153,7
33,4
56,2
12,0
12,0
18,0
18,0
18,0
18,0
25,5
25,5
18,0
25,5
15,0
15,0
15,0
15,0
20,0
20,0
20,0
20,0
25,0
25,0
25,0
30,0
15,0
20,0
25,0
15,0
20,0
25,0
20,0
-
1,5
1,5
2,6
2,6
3,4
3,4
6,1
6,1
5,8
10,2
1,7
1,7
2,3
2,3
2,5
2,5
3,3
3,3
5,7
5,7
7,1
11,0
2,3
3,3
7,1
3,8
5,5
9,4
1,0
-
3,2
3,2
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Code
Range and dimensions
PVA
Breakload *
Hole sizesØ small Ø large
mm
6,2
6,2
8,3
8,3
8,3
8,3
8,3
8,3
8,3
8,3
5,0
5,0
5,0
5,0
7,0
7,0
7,0
7,0
8,5
8,5
8,5
10,5
4,0
6,0
7,5
5,0
7,0
8,5
7,0
-
mm
Distancebetween
holesmm kN
LVAKVA
Productwidth x tickness
* Values are actual break loads. A safety factor
of 3 ... 6 is recommended.
PackagesBox / Outer box / Pallet
Weightkg/1000 m
mm
KVA hot dip galvanized steelKVAH stainless steel grade 316PVA hot dip galvanized steelPVAH stainless steel grade 316PVAM hot dip galvanized steel, plastic coatedPVAL aluminium
LVA hot dip galvanized steel, designed for fixing heating cables
66640
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
KTS, KTHRIP L, RIP U
INSTALLATIONACCESSORIES
Code Packages
55105
55106
55108
55110
55112
55116
55120
55124
55130
55206
55208
55210
55212
55216
55220
KTS 5
KTS 6
KTS 8
KTS 10
KTS 12
KTS 16
KTS 20
KTS 24
KTS 30
KTH 6
KTH 8
KTH 10
KTH 12
KTH 16
KTH 20
2 / 50
2 / 50
2 / 50
2 / 50
2 / 20
2 / 20
2 / 10
2 / 2
2 / 2
2 / 50
2 / 50
2 / 50
2 / 20
2 / 20
2 / 10
120
180
320
500
730
1330
2080
3000
4750
180
320
500
730
1330
2080
Product
m
Break
load *
kN
5,5
6,4
11,8
18,8
27,5
52,2
81,4
117,3
188,3
10,3
19,1
30,5
44,6
84,6
132,0
KTSKTH
Range and packages
57001
57002
57003
57004
RIP L-2
RIP U-2
RIP L-3
RIP U-3
40 / 640 / 1280
24 / 384 / 768
40 / 640 / 1280
24 / 384 / 768
697
1075
843
1276
Product
RIP L
m
PackagesBundle/Gross/Pallet
Code Length
2
2
2
2
Dimensions
mm
30x30x2
30x30x30x2
30x30x2,5
30x30x30x2,5
Hole sizesinstallation / back
Ø mm
11
11
12
12
12
12
RIP U
Sormat installation bars are manufactured of cold rolled hot dip galvanized steel.Installation bars are most often used as base structures in different types ofpipe and channel supporting systems. Due to all round perforation, installationbars are suitable structures for both threaded bar and banding applications.
Weightkg/1000 m
Thread
M 5
M 6
M 8
M 10
M 12
M 16
M 20
M 24
M 30
M 6
M 8
M 10
M 12
M 16
M 20
Weightkg/1000 m
Range and packages
41
* Depending on situation, a safety factor of 3 ... 6 is recommended.
KTS Steel, zinc platedKTH Stainless steel grade 316
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
VASB
VASB with bobstay, without mounting plate
VASD with bobstay and mounting plate
VASB, VASD CONCRETEINSERTS
Range and packages
10x60
12x50
12x70
16x50
16x90
20x100
24x130
100
100
100
50
50
50
25
PackagesCodes
VASB VASBRstainless
steel
VASBSzinc
plated
73110
73113
73112
73117
73116
73120
73124
73190
73192
73198
73196
73197
73150
73153
73152
73157
73156
73160
73164
60,6
74,4
101,7
112,3
202,7
144,0
1062,6
Permisible loads in kNConcrete > C 25
Tension Shear
9,6
-
12,9
4,6
15,2
18,9
24,6
6,2
6,1
-
6,1
-
15,1
24,0
10x60
12x50
12x70
16x50
16x90
20x100
24x130
100
100
100
50
50
50
25
VASD
73310
73313
73312
73317
73316
73320
73324
73390
73392
73398
73396
73397
73350
73353
73352
73357
73356
73360
73364
60,6
74,4
101,7
112,3
202,7
144,0
1062,6
9,6
-
12,9
4,6
15,2
18,9
24,6
6,2
6,1
-
6,1
-
15,1
24,0 VASD
79260
79261
79262
79263
79264
ProductCode
ST 10
ST 12
ST 16
ST 20
ST 24
1000
500
500
500
500
0,2
0,7
1,0
1,7
2,4
79201
79202
79203
79204
79205
ME 10
ME 12
ME 16
ME 20
ME 24
100
100
100
100
50
0,7
0,8
1,0
1,2
1,5
An insert to placed in concrete before it is hardened. After concrete hardening the insert can be loaded from its female thread. Sormat concrete inserts are type approved as load transferring steel elementsin concrete structures. Manufacturing of the inserts is controlled by official authorities.
ME
ST
Mounting plates and protective capsRange and packages
42
Size Weightkg/1000 pcs
Range and packages
Packages Permisible loads in kNConcrete > C 25
Tension Shear
Weightkg/1000 pcs
CodesSize
VASDSzinc
plated
VASDRstainless
steel
Packages Weightkg/1000 pcs
ProductCode Packages Weightkg/1000 pcs
Materials on page 7, restrictions of use (distances) on page 6.Official approvals on pafe 9.
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
FACADE- ANDSTRAIN ANCHORS
FIXINGSYSTEMS
Range and packages
72754
72755
72756
72757
72758
72759
100
100
100
100
100
100
Packagesize
RU M8x220
RU M8x240
RU M8x285
RU M8x330
RU M8x395
RU M8x495
104,0
110,0
124,0
138,3
159,0
190,0
Permissible tension load in kNConcrete > C 20
embedment depth
40mm
2,2
2,2
2,2
2,2
2,2
2,2
2,4
2,4
2,4
2,4
2,4
2,4
Sormat facade anchor RU is designed for repair fixing different kind of cortical structures like sandwich elements. The fixing is done through the shell and the isolation layers into the bearing structure. RU anchor is made of stainless steel.
Product
1,6
1,6
1,6
1,6
1,6
1,6
60mm
80mm
72761
72760
72762
72763
72764
72765
100
100
100
100
100
100
PU M6x220
PU M6x240
PU M6x285
PU M6x330
PU M6x395
PU M6x495
60,0
65,0
70,0
75,0
80,0
90,0
Permissible tension load in kNConcrete > C 20
2,0
2,0
2,0
2,0
2,0
2,0
1,7
1,7
1,7
1,7
1,7
1,7
35mm
Inner anchoring deviceembedment depth
Outer anchoring deviceembedment depth
40mm
RU
PU
Sormat Strain anchor PU is used together with the facade anchor RU in situations where the supporting steel structures of a sandwich element can no more withstand the pressure forces caused by the facade anchor. The strain anchor works in two phases. The inner anchoring element is anchored into the bearing structure like a torque controlled anchor. The outer anchoring element is tightened into the shell layer with a setting tool (page 48).
Drill a Ø 14 mm hole in aspecified angle or perpen-dicular. The depth of thehole is depending on thestructure and desired capacity.
A trimming drilling must bedone when the anchor isinstalled in specified angle.
Mounting and tighteningof the anchoring elementis done with a setting-tool.
Assembled combination of facade- and strain anchor.
Official approvals page 9. Setting tools page 48.
43
Range and packages
Weightkg/1000 pcs
Code
Packagesize
Product Weightkg/1000 pcs
Code
Official approvals page 9. Setting tools page 48.
The fixing is tightenedby using the supportbushing, washer and a nut.
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
PLASTERINGBRACKET ERK
FIXINGSYSTEMS
Range and packages
60060
60061
60062
60063
60064
200
200
200
200
200
Packages
ERK 50
ERK 70
ERK 100
ERK 120
ERK 150
26,6
28,8
31,8
33,7
36,5
Isolationthickness
mm
4
4
4
4
4
Sormat ERK is a fixing device for plastered structures with isolation material between the base structure andthe surface plastering layer. ERK´s articulated construction allowes movements of the surface layer caused by wind pressure and suction. Sormat ERK is a ready to install device consisting of the bracket to be mounted in the structure, pendulum arm according to isolation thickness and three locking plates, one to lock the isolation material and two to lock the plastering net. The ERK bracket shall be mounted with an anchor that is suitable to be fixed in the base material.
Product
50
70
100
120
150
2pcs/m
INSTALLED ERK
LRH
LRH M8
Install the ERK bracket in the structurewith a suitable anchor. Slip the pendulumarm and lock it in the bracket´s slotted hole. Mount the isolation using a mountingchablon so that the pendlum arm pierces theisolation, and lock it with a locking plate. Release pendulum arm from the slot.
Remove the mounting chablon and place theisolation tight against each other. Now the pendulum arm is going to set in about 20 degrees angle downwards and makes an articulated connection to the base structure.
Plastering is done with machine.Due to that the net will stay insidethe plastering layer.
Install the plastering net and lock itwith two locking plates.
Averageconsumption
ERK
The LRH fitting can also be used as an alternative fixing in thebase structure. LRH shall be mounted to the base material with a suitable anchor. LRH is made of stainless steel.Additional data upon request.
44
Sormat ERK is delivered as a ready to install device consisting the bracket to be mounted in the structure, pendulum arm according to isolation thickness and three locking plates. All components are made of stainless steel.
Code Weightkg/1000 pcs
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
RVKM
RVK stainless steelRVKM polyamide
FIXINGSYSTEMS
RVK, RVKM, LPT
Range and packages
60071
60072
60075
60076
60077
60078
500
500
500
500
500
500
PackagesProduct
RVK 5/6
RVK 10/6
RVK 5/8
RVK 10/8
RVKM 5/6
RVKM 10/6
2,5
3,2
2,5
3,2
2,0
2,6
Net distance to structure
6
6
8
8
6
6
5
10
5
10
5
10
60067
60068
60069
LPT M8 x 85
YRR 6 x 45
YRR 6 x 80
200
100
100
29,3
7,4
11,5
M 8
Ø 6
Ø 6
Thread Threadlengthshort long
10 AF 13
Pz 2
Pz 2
Distance bracket RVK is developed to fix 19x19 mm plastering net on the structure so, that there will remain a desired space between the base structure and the net. This will allow the plaster layer to settle on both sides of the net. The bracket shall be fixed in the base material with suitable anchor with high corrosion resistance. Average consumption is 4 - 7 pcs / sqm, depending on the quality of the base material and the thickness of the plastering layer.
LPT
RVK
Fixinghole
Ø mm mm
YRR
30
45
80
Head
mmmm
Drill a hole using asleeve drill through theplaster into the base
Install a plug for aeratedconcrete and screw in the LPTso, that the hexagonal flangeis at the level of the plastersurface
An example of using LPT when mounting an ERK in a plastered aerated concrete base.
Attach the ERK in the shorterthread of the LPT using a nut.The flange of the LPT takes the force of tightening the nut without affecting the plug in the base material
45
Code Weightkg/1000 pcs
Range and packages
pcs
LPT flange boltYRR universal screw, stainless steel
PackagesBox
Code Product Weightkg/1000 pcs
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
Range and packages
PIPESUPPORTS
KOPI, KUPIKUPI / 2
Pk 7
Pk 9
Pk 11
Pk 13,5
Pk 16
Pk 21
Pk 29
Pk 36
Pk 42
Pk 48
CodesSize
-
42222
42223
42224
42225
42226
42227
42228
42229
42230
KOPI
50 / 600
50 / 500
50 / 500
50 / 500
50 / 500
50 / 450
25 / 250
25 / 300 *
25 / 300 *
20 / 240 **
23,0
24,3
25,0
27,4
28,7
34,8
38,7
51,0
55,2
70,0
PackagesBox / Outer box
Weightkg/1000 pcs
KOPI steel, zinc platedKOPI RST stainless steelKOPI AL aluminium
KUPI plasticKUPI / 2 plastic, with a lock
KOPI KOPI RST KOPI AL
42201
42202
42203
42204
42205
42206
42207
42208
42209
42210
-
42242
42243
42244
42245
42246
42247
42248
42249
42250
KOPI KOPI RST KOPI AL
-
24,0
24,3
27,4
28,7
34,8
40,4
48,1
58,0
63,6
-
11,2
11,4
11,9
12,1
14,9
16,9
19,0
22,8
25,7
* KOPI AL 25/250 ** KOPI RST 20/200
11-13
14-16
17-19
19-21
21-23
24-29
30-38
39-48
48-54
53-61
Suitable forpipes Ø
mm
KUPI
KUPI / 2
KUPI 12
KUPI 15
KUPI 18
KUPI 20
KUPI 22
KUPI 25
KUPI 28
KUPI 31
KUPI 36,5
KUPI/2 3-7
KUPI/2 6-13
KUPI/2 12-20
KUPI/2 16-24
KUPI/2 18-30
KUPI/2 27-43
ProductCode
41201
41202
41203
41204
41205
41206
41207
41208
41209
41221
41222
41223
41224
41225
41226
100 / 1000
100 / 1200
100 / 1200
100 / 1200
100 / 1200
100 / 800
100 / 800
50 / 600
50 / 600
100 / 1200
100 / 1200
50 / 500
50 / 500
25 / 300
25 / 300
2,5
2,9
3,5
4,2
4,9
5,3
5,7
7,5
9,6
2,6
3,7
6,4
8,4
12,3
18,1
mm
12
15 and Pk 9
18 and Pk 11
20 and Pk 13,5
22 and Pk 16
25
28 and Pk 21
31
36,5 and Pk 29
3 - 7
6 - 13
12 - 20
16 - 24
18 - 30
27 - 43
46
Suitable forpipes Ø
PackagesBox / Outer box
Weightkg/1000 pcs
Range and packages
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
Range and packages
PPCPPL
PIPE SUPPORTS
PPC 10-13
PPC 12-16
PPC 17-19
PPC 20-23
PPC 25-30
PPC 31-38
PPC 40-46
PPC 48-53
PPL 12-16
PPL 15-19
PPL 20-23
PPL 25-30
PPL 31-38
PPL 40-46
PPL 48-53
PPL 50-56
PPL 60-64
PPL 63-67
PPL 74-80
PPL 87-92
PPL 102-116
PPL 132-141
PPL 159-168
PPL 210-219
ProductCode
41007
41008
41010
41015
41020
41025
41032
41040
42008
42010
42015
42020
42025
42032
42040
42054
42050
42064
42065
42080
42100
42125
42150
42200
PPC
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
25
25
25
29,0
31,3
33,4
37,1
41,1
55,6
64,1
66,4
30,0
52,3
78,5
84,1
94,1
105,1
117,0
70,0
135,5
80,0
155,4
160,6
234,0
265,2
295,0
490,0
Packages
PPC is a simplex pipe support equipped with sound isolation rubber (DIN 4109). PPC is locked with one screw. This support is attached in the structure with it´s M8 female thread.
PPL is a duplex pipe support equipped withsound isolation rubber (DIN 4109). PPL is locked with two screws, and it is attachedwith it´s M8 / M10 female thread.
PPL
Ø
mm
10 - 13
12 - 16
17 - 19
20 - 23
25 - 30
31 - 38
40 - 46
48 - 53
12 - 16
15 - 19
20 - 23
25 - 30
31 - 38
40 - 46
48 - 53
50 - 56
60 - 64
63 - 67
74 - 80
87 - 92
102 - 116
132 - 141
159 - 168
210 - 219
Attachingthread
inch
JRL
JR
JR 8 x 60*
JR 8 x 80*
JR 8 x 100*
JR 8 x 120*
JR 10 x 80*
JR 10 x 100*
JR 10 x 120*
Product
thread x tot.length
Code
41084
41086
41087
41088
41089
41090
41091
Packages
100
100
100
100
100
50
50
16,8
18,9
24,1
30,4
31,1
37,4
47,1
41082
41080
41083
41081
JRL 6 x 40
JRL 8 x 40
JRL 8 x 80
JRL10 x 50
100
100
100
100
4,8
6,9
12,6
15,2
47
For tube diameters Weightkg/1000 pcs
pcs
pcs
Weightkg/1000 pcs
Product
thread x tot.length
Code Packages
pcs
Weightkg/1000 pcs
Range and packages
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8 / M 10
M 8 / M 10
M 8 / M 10
M 8 / M 10
M 8 / M 10
M 8 / M 10
M 8 / M 10
M 8 / M 10
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
8
* with T25 head
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
SORMAT PRODUCTS
SETTINGTOOLS
Code
8
Min.Delivery
qty
Weightkg/1000 pcs
79020
79021
79106
79108
79110
79112
79116
79120
79114
79117
79140
79141
79142
79143
79145
79146
79101
79102
79103
79104
75855
72792
72793
72791
79170
79190
79191
79192
79194
79195
79197
79199
S-KA 6-10
S-KA 12-20
LT 6
LT 8
LT 10
LT 12
LT 16
LT 20
LT MTA 8/12
LT MTA 10/16
KEVA 8-10 SDS+
KEVA 12 SDS+
KEVA 16-20 SDS+
KEVA 24-30 SDS+
KEVA 16-20 SDS Max
KEVA 24-30 SDS Max
MOLA pliers
KBT 4-6
KBT 8
KBT 10
SKRH
PU setting tool M 6
RU setting tool M 8
PU setting mandrel
T40 bit
VSS/VKS/VH set M8
VSS/VKS/VH set M10
VSS/VKS/VH set M12
VSS/VKS/VH set M16
VSS/VKS/VH set M20
VSS/VKS/VH set M24
VSS/VKS/VH set M30
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
1
1
1
1
1
1
1
62,0
102,0
50,5
83,8
101,9
183,0
334,0
532,3
170,0
200,0
17,0
28,0
82,0
105,0
292,0
287,0
430,7
13,8
20,2
31,5
16,7
123,0
121,0
100,0
13,0
3,0
5,0
7,5
15,0
30,0
495,0
865,0
Tool for installingfollowing products
48
Every product is most effectively installed with an original setting tool.By using original tools damages like destroying threads etc. can be avoided. In displacement controlled anchors it is essential to useoriginal tools to achieve a proper installation.
KEVA SETTING TOOL
MOLA PLIERS
SKRH SETTING TOOL
RU, PU SETTING TOOL
PU M6 SETTING MANDREL
KBT SETTING TOOL
LA SETTING TOOL
S-KA SETTING TOOL
T40 BIT
MTA SETTING TOOL
VSS, VKS, VH SETTING TOOL
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
Range and packages
CABLE TIESJS, JSS, JSM
JST, SLA
CABLEFIXINGS
16010
16110
16015
16115
16020
16120
16030
16130
16037
16137
16038
16053
16210
Codes
100 x 2,5
100 x 2,5
150 x 3,5
150 x 3,5
200 x 4,8
200 x 4,8
300 x 4,8
300 x 4,8
375 x 4,8
375 x 4,8
380 x 7,6
530 x 7,6
100 x 2,5 M
JST
JS
16510
16610
16515
16615
16520
16620
16530
16630
16537
16637
16538
16553
16710
16801
500 / 5000
100 / 5000
500 / 5000
100 / 5000
500 / 2500
100 / 2500
500 / 2500
100 / 2500
500 / 1500
100 / 1500
100 / 1200
100 / 1000
500 / 4000
500 / 2500
PackagesBag / Outer box
Weightkg/1000 pcs
JS TransparentJSS Black, weather resistantJSM With marking plateJST Socket plug
JSS
Sizelength x width
JSSblack
weather resist.
JStransparent
Bundlemax Ø
Strengthof the tie
mm N
20
20
35
35
50
50
80
80
105
105
105
150
20
80
80
175
175
220
220
220
220
220
220
530
530
80 8 x 19
Size ofmarking
plate
mm
0,3
0,3
0,7
0,7
1,3
1,3
2,1
2,1
2,8
2,8
6,1
8,6
0,5
2,1
Cable tie JS is designed to be used in making bundles, as well as bandagin all kind of bunches.The function of JS is based on serrated tie and a locking mechanism which allow thetie to tighten almost stepless around the bundle. As rawmaterial is used Polyamide 66 (Nylon)which is strong, tough and has excellent temperature- and chemical resistance.
JST is a plug to be installed in concrete and other hard base materials. An installedplug has a function of a socket for cable ties. Drill a hole Ø 8mm, depth 36 mm andhammer gently the plug into the hole. Observe the desired direction of the opening in the head of the plug.
JSM JST
Valikoima ja pakkauskoot
SLA 1,4 grey
SLA 1,8 black
Code
16301
16302
100 / 1000
50 / 500
PackagesReel / Outer box
Weightkg/1000 m
Wholewire
Breakload
kN
1,0
1,5
0,24
0,53
5,8
14,3
Product Corewire
Ø mm
1,4
1,8
m
SLA
Ø mm
49
SLA Plastic coated mild steel wire for bandaging.
Range and packages
JST in use
mm
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
NAIL CLIPSSC, SCH, SCM
CABLEFIXINGS
11005
11008
11007
11010
11011
11012
11013
11014
11015
11020
11021
11022
11026
SCwhite
Size
3-5
4-6
5-7
7-10
7-10 L30
8-12
8-12 L45
10-14
10-14 L45
14-20
14-20 L45
18-22
20-26
100 / 3000 / -
100 / 3000 / -
100 / 3000 / -
100 / 2000 / -
100 / 2000 / -
100 / 2000 / -
100 / 2000 / -
100 / 2000 / -
100 / 2000 / -
100 / 2000 / -
100 / 2000 / -
50 / 1000 / -
50 / 1000 / -
0,31
0,29
0,37
0,83
0,93
1,28
1,64
1,43
1,85
2,19
2,42
3,18
3,80
Clip SC is for fixing cables, tubes and other oblong elements.SC is made of Polypropylene, which makes the clip flexible and shockproof. SC withstands well various temperatures and most chemicals. Due to it´s flexibility, one size covers various cable dimensions. SC is very easy to put on the cable. The clip is equipped with hardened steel nail which is zinc plated. This nail can be used without its bending also in very hard wooden constructions.
Most sizes are upon request delivered also with stainless steel nail.
11305
11308
11307
11310
11312
11314
11320
11322
11326
SCHgrey
SCMblack
weather resistant
Codes
11505
11508
11507
11510
11512
11514
11520
11522
11526
SCLtranspa-
rent
11105
11108
11107
11110
11114
11121
Suitable forcables
Ø mm
3-5
4-6
5-7
7-10
7-10
8-12
8-12
10-14
10-14
14-20
14-20
18-22
20-26
Nail
Øxlength
mm
1,2x20
1,2x20
1,2x20
2,0x25
2,0x30
2,0x30
2,0x45
2,0x30
2,0x45
2,0x35
2,0x45
2,5x45
2,5x45
PackagesBox/Outer box
SC SCH SCM
SCwhite
Size
100 / 3000 / -
100 / 3000 / -
100 / 2000 / -
0,31
0,34
0,83
Codes
SCLtranspa-
rent Ø mm
3 x 5
4 x 6
6 x 9
mm
1,2x20
1,2x20
2,0x25
3 x 5
4 x 6
6 x 9
11038
11104
11106
FOR FLATCABLES
NT
Range and packages
200 / 10000 0,65
Code Drilling
mm
NT 6 x 25
mm
2575401
Product Pluglength
6 / 25
Weightkg/1000 pcs
Weightkg/1000 pcs
PackagesBox/Outer box
Nail
Øxlength
Suitable forcables
PackagesBox/Outer box
Weightkg/1000 pcs
Range and packages
Range and packages
50
NT clip plug is used when installing SC in hard materials like concrete or brick.
Ø / depth
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
Range and packages
KK, KKKSVVK
CABLE CLAMPS
KK 12
KK 14
KK 18
KK 22
KK 26
KK 30
KK 34
KK 40
KK 46
KK 52
KK 60
KK 82
KK 12/2
KK 14/2
KK 18/2
KK 22/2
KK 26/2
KK 30/2
KK 40/2
KKA 22
KKA 26
KKA 30
KKA 40
KKA 46
KKA 60
KKKS
ProductCode
13112
13114
13118
13122
13126
13130
13134
13140
13146
13152
13160
13182
13165
13166
13167
13168
13169
13170
13172
13522
13526
13530
13540
13546
13560
15010
200
200
200
200
200
200
200
200
150
100
100
25
200
200
200
200
200
150
150
200
200
200
200
150
100
2 m / 40 m
23,0
23,0
27,0
28,0
34,0
40,0
44,0
75,0
96,0
100,0
119,0
145,0
29,0
31,0
35,0
38,0
45,0
54,0
104,5
15,0
18,0
22,0
41,0
50,0
69,0
549*
Packages Weightkg/1000 pcs
Installation bar KKKS for Sormat KK cable clamps.KKKS is manufactured of cold rolled hot dip galvanizedsteel Z 32-275N. The thickness of the material is 1,5 mm, and the opening in the bar is 11 mm.
KK
A
B14
15
19
23
27
31
35
41
47
53
62
84
14
15
19
23
27
31
41
23
27
31
41
47
62
A
mm
38
38
44
43
52
60
59
76
84
96
105
122
53
48
56
65
77
85
115
43
52
60
76
84
105
B
mm
KKKS
Sormat cable clamp KK is designed to clamp cables,tubes and other oblong elements. The clamp is made of hot dip galvanized steel type Z 350 NA. Also the screw is hot dip galvanized.On request KK is availablealso for 3 cables, KK.../3.
The aluminium clamp, KKA, is totally made of aluminium AlMn3/4.
The size digits indicate the max. diameter of the fixture.
51
11 mm
Attachment in the bar
VVK 8-12
VVK 12-16
VVK 16-22
VVK 22-28
VVK 28-34
VVK 34-40
VVK 46-52
VVK 58-64
ProductCode
13969
13970
13971
13972
13973
13974
13975
13976
100 / 2700
100 / 2700
100 / 2700
100 / 1800
100 / 1000
100 / 1200
100 / 1200
50 / 500
1,8
1,9
1,9
2,4
3,0
3,3
4,4
6,8
VVK
VVK, a cable supportto be placed betweenthe installation rail andthe cable.Fits in rails with 11 mm opening.
Range and packages
PackagesBox / Outer box
Weightkg/1000 pcs
* kg/1000 m
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
Range and packages
KP, KPA, KL
KP 12
KP 14
KP 18
KP 22
KP 26
KP 30
KP 34
KP 40
KP 46
KP 52
KP 60
KP 82
KPA 26
KPA 30
KPA 34
KPA 46
KPA 60
KL 12
KL 14
KL 18
KL 22
KL 26
KL 30
KL 34
KL 40
KL 46
KL 52
KL 60
KL 82
KL 12/2
KL 14/2
KL 18/2
KL 22/2
KL 26/2
KL 30/2
KL 40/2
13212
13214
13218
13222
13226
13230
13234
13240
13246
13252
13260
13289
13626
13630
13634
13646
13660
13012
13014
13018
13022
13026
13030
13034
13040
13046
13052
13060
13082
13065
13066
13067
13068
13069
13070
13072
200
200
200
200
200
200
200
150
100
100
100
25
200
200
150
100
50
200
200
200
200
200
200
200
150
100
100
100
25
200
200
200
200
200
150
100
23,0
25,0
27,0
28,0
34,0
40,0
44,0
75,0
96,0
100,0
119,0
145,0
19,0
22,0
26,0
49,9
62,4
27,0
27,0
31,0
51,0
53,8
60,8
68,4
76,0
95,6
106,0
199,0
143,8
52,0
58,0
63,0
72,0
76,0
85,0
107,6
KP
KL
14
15
19
23
27
31
35
41
47
53
62
84
27
31
35
47
62
14
15
19
23
27
31
35
41
47
53
62
84
14
15
19
23
27
31
41
48
48
51
55
58
65
68
75
81
90
97
128
58
65
68
81
97
54
54
60
64
67
75
78
84
90
98
105
126
78
80
84
90
102
110
124
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
mmmmmm
52
< 4
< 9
< 20
< 20
< 22
KP and KL are clamps which can be attached in various types of bars,profiles and sheet formed structures.
All parts of these clamps are hot dip galvanized.
The size digits indicate the max. fixture diameter. Size marking 26/2 indicates that the clamp is suitable for fixing two Ø 26 mm cables. On request we deliver clamps also for 3 cables.
ProductCode Packages Weightkg/1000 pcs
CBA
CABLE CLAMPS
Suitable profilesfor attaching theclamp.
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
Range and packages
CABLE CLAMPS KR, VVL, VKA
KR 12
KR 14
KR 18
KR 22
KR 26
KR 30
KR 34
KR 40
KR 46
KR 52
KR 60
KR 12/2
KR 14/2
KR 18/2
KR 22/2
KR 26/2
KR 30/2
KR 12/3
KR 14/3
KR 18/3
KR 22/3
KR 26/3
KR 30/3
ProductCode
13312
13314
13318
13322
13326
13330
13334
13340
13346
13352
13360
13412
13414
13418
13422
13426
13430
13361
13362
13363
13364
13365
13366
KR
200
200
200
200
200
200
200
150
100
100
100
200
200
200
200
200
150
200
200
200
200
200
200
23,0
45,2
48,2
53,2
62,0
65,5
75,5
80,8
99,0
108,5
119,4
54,6
58,2
64,0
71,3
86,2
90,1
64,2
68,3
77,6
85,3
103,2
114,0
Packages Weightkg/1000 pcs
Cable supports VVL is used between cable and installation profile to protect cable mantle.When clamping several cables with one clamp, the VKA is used between two cables to protect cable mantels and to give distance between cables and by that mean prevent possible overheating.The supports are made of weather resistant Polyamide (Nylon).
74
74
80
84
87
95
98
104
110
118
125
98
100
104
110
122
130
113
117
125
135
150
165
B
mm
53
Cable clamp type KR is for clamping cables, tubes and other oblong elements.KR is designed to be attached in structures made of angle iron.All parts of the clamp are hot dip galvanized. KR range covers also clamps fortwo and three cables. The size digits indicate the max. fixture diameter.
Suitable profilefor attachment.
Range and packages
13980
13965
13982
13966
13984
VVLSize
12-16
18 L *
26-30
30 L *
40-46
100 / 1000
100 / 1000
100 / 1000
100 / 1000
100 / 1000
Weightkg/1000 pcs
PackagesBox/Outer box
VVL VKA
12-16
18 L *
26-30
30 L *
40-46
50 / 500
100 / 1000
50 / 500
100 / 500
50 / 500
13990
13967
13992
13968
13994
1,3
1,7
2,3
3,2
4,1
2,3
2,3
3,8
4,7
7,0
* with locking mechanism
Range and packages
VKASize Weightkg/1000 pcs
PackagesBox/Outer box
* with locking mechanism
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
RK 5-25RK 7-38
RK, RKK, ALKI CABLE FIXINGS
ProductCode PackagesBox / Outer box
Sormat row clamp RK is designed for fixing cables, tubes and other oblong elements. RK is installed in a bar and locked on both sides of the element to be fixed. The clamp is made of shock-proof Polystyrene which withstands well various chemicals and stands high temperatures.Type RK 4-28 is totally made of plastics. This gives it upmost durability against corrosion. The patented construction of the clamp allows to add or remove cables from existing installations.
The installation bar, RKK is made of hot dip galvanized steel (RKKS), or stainless steel (RKKH). The white bar (RKKM) is made of hot dip galvanized steel and coated with polyester.The length of the bars is 1 meter.
Weightkg/1000 pcs
RK 5-25
RK 7-38
RK 4-28
17401
17402
17403
17405
17404
100 / 2000
50 / 1000
100 / 2000
11
11
11
2,18
2,60
3,57
3,60
7,50
ProductCode
Fordiam.
Ø mm
Range and packages
5-25
7-38
4-28
4,06
7,38
3,22
RK 4-28
12025
12038
12028
Code Product PackagesOpening
mm
100
100
10
210
199
210
15001
15002
15004
RKKS
RKKM
RKKH
ALKI 16
ALKI 20
ALKI 25
ALKI 28
ALKI 40
200 / 2400
200 / 1200
100 / 1000
100 / 1000
100 / 600
54
RKK
ALKI
Weightkg/1000 pcs
m
Range and packages
Range and packages
Weightkg/1000 pcs
PackagesBox / Outer box
SORMATSORMATQUALITY ANDENVIRONMENTQUALITY AND
ENVIRONMENT
SET H
55
SET SET V0
Installation
Range, packages and installation parameters
5507
5510
5514
5520
5526
5532
SET HGrey
Size
5 - 7
7 - 10
10 - 14
14 - 20
20 - 26
26 - 32
50 / 2000
50 / 1000
50 / 1000
50 / 500
25 / 300
25 / 150
4,0
5,4
6,9
11,0
21,7
34,6
Weightkg/1000 pcs
PackagesBox / Outer box
5707
5710
5714
5720
5726
5732
SETWhite
5607
5610
5614
5620
5626
5632
SET V0Lightgrey
5 - 7
7 - 10
10 - 14
14 - 20
20 - 26
26 - 32
1 - 4
1 - 4
1 - 4
1 - 4
1 - 4
1 - 4
16
19
23
29
38
48
Ø mm
Suitablediam.
Mountinghole
dØ mm
Wall thickness
smm
Codes
Sormat SET is an elastic grommet made of melt processible rubber. SET is used as a seal when a cable or tube is penetrating into a switchboard or enclosure. SET is more dust- and waterproof than most of the metallic grommets. Sormat SET is available in six dimensions covering cable / tubediameters from Ø 5 to Ø 32 mm.
Material: Alcryn (melt processible rubber), Halogen-freeWeather resistance: excellent resistance against UV beams, ozone and waterChemical resistance: excellent against oil, most solvents and organic acids
oTemperature range: -40 - +100 CProtection class: IP67Fire resistance: SET and SET H, UL 94 V2, SET V0, UL 94 V0, self extinguishing
SET, SET H SET V0
CABLE GROMMETS
56
TECHNICAL DATA SORMAT
FORCES AFFECTING A FIXING
N = tension foceF = force in general
V = shear force
DIFFERENT LOAD TYPES
STATIC LOAD
Constantly changingDirection and size ofthe force changesregularly
PulsatingDirection or size orboth change irregularly
ShockDirection or sizechanges randomly
t
F
F
t
+
0_
+
0_
t
F
+
0_
t
F
+
0_
Size and directionof the load remainunchanged
DYNAMIC LOADS
NN
Steel failure can be calculated from formula As x f where As is the area of the anchor uk
under stress load, and f is the ultimate uk
strength of the raw material. Steel failure is the biggest achievable resistance for an anchor.
Displacement is anchor´s movement out from the installation hole. Loads that create displa-cement are different in sizes among different types of anchors. Loads that create displace-ment can be determined only experimentally.
Concrete failure is essentially affected by two parameters; compression strength of the concrete member and effective anchorage depth of the anchor.
NN
NN
FAILURE MODES OF A FIXING
Christian ÖsterbergManaging director
T: +358 20 176 3804M: +358 400 327 959
57
Possible changes either in the product range or in product information are updated continuously in our homepages www.sormat.fi and www.pfg.nl
WORLD MAP
WE SERVE YOUCONTACT
INFORMATION
GROUPSALES AND MARKETING
PRODUCT MANAGEMENT
TECHNICAL SUPPORT
Jari LeminenTechnical directorT: +358 20 176 3811M: +358 400 775 933E: [email protected]
Toni KonttoProduct managerT: +358 20 176 3821M: +358 40 729 2611E: [email protected]
Jarmo KylliäinenMarketing managerT: +358 20 176 3820M: +358 400 223 994
SORMAT OYSORMAT-PFG B.V.
SORMAT OST L.L.C.
T: +358 201 76 3800E: [email protected]
T: +31 492 4690E: [email protected]
T: +7 812 380 62 12E: [email protected]
SORMAT FRANCE SAS
T: +33 826 020 029E: [email protected]
NOTES SORMAT
58