Catalog

336

6

Wel

ding

Acc

esso

ries

PearsonVendor Code: PEA

Mag Tool™: Multi-Purpose Magnetic Holders• Designedtoworkasanextrahand-enablesfastandaccurateholdingofany

ferrousobject.• Willholdbothsheetandtubeatanglesof45°,90°and135°.

• Compactdesignallowsuseintightplaces.• Canbeusedasdouble-sidedholderforweldingandassemblywork.• Idealforuseaswork-holderandpositionerinwelding,soldering,marking-off,

pipeinstallation,supporting,jigging,assembly,asaseparator,multi-unitsforheavyweldments,liftingetc.

• 10percarton.

Caution! Do not use with DC current when welding.

Part No. M-063

Part No. M-061Part No. M-060

Magnet:anisotropicferrite*Incontactwithferrousobjectsofadequatethicknessandsmoothsurfacefinish.

Part No. M-065

Part No.Dimensions Supports up to Direct lifts (each angle)* Net weightInches cm Lbs. Kg Lbs. Kg Oz. Grams

M-060(small) 3.6x2.4x0.44 9x6x1.1 28 12.5 11 5 6 170

M-061(medium) 4.7x3.4x0.56 12x8.5x1.4 48.5 22 18.5 8.5 12 340

M-063(large) 6.3x4x0.63 15.8x10x1.7 90 41 35 16 1.65 750

M-065(x-large) 7-9x5x0.88 20x12.5x21 122 55 48.5 22 2.75 1.25

SolderingWelding

Assembly Marking-Off Pipe Installation

For Lifting

Heavy Weldments

Multi-Units ForAs A Separator

Mag Tool / Tank Wrenches

Tank Wrenches• Heavy-dutyforgedtankwrenchesfitmostvalve

stemsandgasconnections.• Socket-holesaredeep,smoothandprecisely

sizedforsolidconnection.• Largerhandlesforfirmgripandbetterleverage.• Allwrenchesareindividuallypackaged.

Part No. UPC No. 0 27719 Description

Hole SizeCtn/Case

Inches mm

1013 013206 Tenwaytankwrench,3/16"-1-1/8"with3/8"socket 3/8 9.52 10/50

0250 013213 “T”handletankwrench,forLinde®acetylenevalves 9/32 7.14 10/100

0020 013305 “T”handletankwrench,forcommercialacetylenevalves 3/8 9.52 10/100

0010 013312 “L”handletankwrench,forcommercialacetylenevalves 3/8 9.52 20/200

0005 013329 Boxtankwrench,for“B”&“MC”acetylenevalves 3/16 4.76 100/1000

Part No. 1013 Part No. 0250 Part No. 0010 Part No. 0005

www.oki-bering.com

337

6

Welding Accessories


Pressure Gauges

Pressure Gauges• Premiumqualityreplacementgaugesarethe

industrystandard.• Oxy-cleanedweldinggauges(cleanedfor

oxygenperANSIB40.1STD.). Suitableforuseonoxygenservice,medical

equipmentandotherfuelgaseswhicharenon-corrosivetobrassorbronzeandwherestem-mountingisdesired.

• Polisheddrawnbrassorgoldpowderpaintedsteelwithone-piece,impact-resistantpolycarbonateposilocklens.

• Forusewithcompressedgasregulators,thesegaugesareanexcellentchoicefortheoriginalequipmentandreplacementapplications.Theywillprovidelong-lifeandsafeoperation.

• GaugesareU.L.listed.

Specifications:Case:Powderpaintedsteel(gold)or

polisheddrawnbrassLens:One-piece,impact-resistantpolycarbonateSocket:BrassConnection:1/4"N.P.T.-2"(50mm)and

2-1/2"(60mm)dialMovement:PrecisionmachinedallcopperalloyTube:CopperalloybourdontubePointer:Black-finishedaluminumDial-face:Easy-to-read,corrosion-resistant

aluminumdialAccuracy:3%-2%-3%perANSIB40.1gradeB

POP Part No.

Boxed Part No. Size PSI

PG-15100 PG-15100-B 1.5" 100

PG-15200 PG-15200-B 1.5" 200

PG-1530 PG-1530-B 1.5" 30

PG-15400 PG-15400-B 1.5" 400

PG-154000 PG-154000-B 1.5" 4000

PG-230 PG-230-B 2" 30

PG-2100 PG-2100-B 2" 100

PG-2200 PG-2200-B 2" 200

PG-2400 PG-2400-B 2" 400

PG-24000 PG-24000-B 2" 4000

PG-2530 PG-2530-B 2-1/2" 30

PG-25100 PG-25100-B 2-1/2" 100

PG-25200 PG-25200-B 2-1/2" 200

PG-25400 PG-25400-B 2-1/2" 400

PG-254000 PG-254000-B 2-1/2" 4000Gauge Cover Lens

GCL-2 2"

POP Part No.

Boxed Part No. Size PSI

BG-15100 BG-15100-B 1.5" 100

BG-15200 BG-15200-B 1.5" 200

BG-1530 BG-1530-B 1.5" 30

BG-15400 BG-15400-B 1.5" 400

BG-154000 BG-154000-B 1.5" 4000

BG-230 BG-230-B 2" 30

BG-2100 BG-2100-B 2" 100

BG-2200 BG-2200-B 2" 200

BG-2400 BG-2400-B 2" 400

BG-24000 BG-24000-B 2" 4000

BG-2530 BG-2530-B 2-1/2" 30

BG-25100 BG-25100-B 2-1/2" 100

BG-25200 BG-25200-B 2-1/2" 200

BG-25400 BG-25400-B 2-1/2" 400

BG-254000 BG-254000-B 2-1/2" 4000

BG-260 BG-260-B 2" 60

BG-2600 BG-2600-B 2" 600

BG-23000 BG-23000-B 2" 3000

BG-2560 BG-2560-B 2-1/2" 60

BG-25600 BG-25600-B 2-1/2" 600

BG-251000 BG-251000-B 2-1/2" 1000

BG-253000 BG-253000-B 2-1/2" 3000Gauge Cover Lens

GCL-25 2-1/2"

Polished Drawn BrassBG Series

Powder Painted SteelPG Series

www.oki-bering.com

338

6

Wel

ding

Acc

esso

ries

Part No. UPC No. 0 27719 DescriptionSteel rotary filesCSA-5 001432 1/2"X7/8",cylindricalshapeCSF-5 001449 1/2"X7/8",roundtreeshapeCSD-5 001456 1/2"X1/2",ballnoseshapeCSC-5 001470 1/2"X7/8",cylindricalshapeCSL-4 001487 1/2"X7/8",14˚angleshapeRFS-5 032856 Steelrotaryfilekit,5pc.setSteel rotary raspsRA-6 001531 CylindricalshapeRC-6 001579 BallnoseshapeRE-6 001586 OvalshapeRM-6 001623 Coneshape

Tungsten Carbide, Rotary Burs (Double Cut)• Tungstencarbiderotarybursofferperfectsolutionsfortheweldingjobs:trimmingwelds,

grindingsmoothfillets&preparationforweld.• Tungstencarbidebursgiveyoulongerlife,duetotheoptimumcoordinationofnumber

offlutes,spiralangle,rakeangleandconcentricity.• Designedforhighstockremovalrateswithproportionatelonglife.• Superiorperformanceformachiningofmaterialswithanytensilestrength.• Themostcommonusedbursinshapesandsizesareasfollows,indoublecut.• Allrotaryburshaveastandardshankof1/4"(6mm)andpackaged1piecetoapack.• 10percarton.Note:Uselowerspeedswhencuttingharderferrousmaterialsandhigherspeedsforsofternon-ferrousmaterials. SD-5-DCSL-4-DCSA-5-DCSF-5-DCSC-5-DC

Steel Files and BrushesHalf-Round File, Bastard• Manufacturedfromthefinestqualitymaterialsforlonglife.• Uniformincutensuresquickstockremoval.• Extremelydurableandscientificallybalanced.• Doublecutonbothsidesforoutstandingperformance.

Scratch Brush, Long and Shoe Handle• Usedforremovingrust,scale,paint,solderetc.• Additionalusesincludecleaningthreads,files,

metalpartsandcastings.• Availableincarbonorstainlesssteel.

Brass Brush, Toothbrush Style 3 x 7 Rows• Lightdutycleaningofhard-to-reachspotsand

forcleaningweldsinconfinedareas.

Parts Cleaning Brush • Resistanttomostpartscleaningsolutions.• Greatforhard-to-reachspotsandforcleaning

inconfinedareascomeswithametalferruleformoresupport.

Part No. SH-46-CS

Part No. 388-CS

Part No. T-37-B

Rotary Burs / Steel Files and Brushes

Steel Rotary Files and Rasps• Rotarybursofferperfect

solutionsfortheweldingjobs:trimmingwelds,grindingsmoothfiletsandpreparationforwelding.

• Repairscanbeeasilydonebecauseofavarietyofshapesandsizesavailable.

• 10percarton

Part Nos: RM-6Note:Uselowerspeedswhencuttingharderferrousmaterialsandhigherspeedsforsofternon-ferrousmaterials.

Part No. HRB12

CSF-5 CSD-5 CSC-5 CSL-4CSA-5

RE-6 RC-6 RA-6

Part Nos:

Part No. UPC No. 0 27719 Description Ctn

HRB12 013480 Half-roundfile,bastard,12",bulk 5/50HRB14 013497 Half-roundfile,bastard,14",bulk 5/50

Part No. PC-1P

Part Nos:


T-37-B 001609 Brassbrush,3x7rows,bulk 50/600T-37-SS 003931 Stainlesssteelbrush,3x7rows,bulk 50/600


Long handle388-CS 033709 Scratchbrush,bulk 12/120388-SS 033716 Stainlesssteelbrush,bulk 12/120Shoe handleSH-46-CS 033723 Shoehandlebrush,bulk 12/120SH-46-SS 033730 Stainlesssteelbrush,bulk 12/120


PC-1P 001593 Partscleaningbrush,bulk 50/300


www.oki-bering.com

339

6

Welding Accessories

Part No. AF-2 Part No. AF-3 Part No. AF-50

Myclass™

Maintenance Class• 10percarton.

Part No. UPC No.0 27719

Amperage Capacity

Electrode Capacity Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams

PA-532 007465 200 Upto5/32 4.0 2/0 70 8 215 15 415PA-316 007519 250 Upto3/16 4.8 2/0 70 9 235 16 450PA-732 007564 300 Upto7/32 5.6 2/0 70 10 250 19 530PA-14 007618 350 Upto1/4 6.4 4/0 105 11 275 22 630PA-14-HD 011172 400 Upto1/4 6.4 4/0 105 11 280 23 650PA-38-HD 011226 500 Upto3/8 10 4/0 105 12 310 30 850

Electrode Holders• Ergonomicallydesigned.• Leverforgoodhandclearanceandbetterhold.• Lightweightandeasy-to-use.• Availableinacompleterangeofstyles,sizes&capacities(150-500amp.)foraccommodatingelectrodes

from1/16"(1.5mm)through3/8"(10mm)fromeconomicallypricedtoheavy-dutymodels.• Madefromhighqualitymaterialsforbothhighconductivityandimprovedcableconnections.• Efficientgroovedjawdesigninsuresfirmelectrodegrip.• Fullyinsulated,highstrengthspringforexcellentgrippingpower.• Heavy-duty,shock-proofnylonhandle.• Suppliedwithanallenwrenchandcableconnectionferruleassuringefficientconnectionandminimizing

cablestrandbreakageattheconnection.

Part No. PA-532 Part No. PA-732 Part No. PA-38-HD

Hyclass™

High Tong Type• 10percarton.


Amperage Capacity


AF-1 007267 150 Upto5/32 4.0 1/0 50 8 215 14 390AF-2 007311 200 Upto5/32 4.0 1/0 50 8 215 14 390AF-25 011127 250 Upto3/16 4.8 2/0 70 8 215 14 400AF-3 007366 300 Upto1/4 6.4 2/0 70 10 250 22 610AF-50 007410 500 Upto3/8 10 4/0 105 12 310 28 800

Electrode Holders

Model No. Part No. UPC No.0 27719

Amperage Capacity200 250 300 350 400 500

PA-532TI-4 010625

•

PA-316 •

PA-732

TI-5 010670

•

PA-14 •

PA-14-HD •

PA-38-HD TI-6 010724 •

Replacement Parts for Hyclass™

Tip Insulators• Upperandlowertipinsulatorsaresoldasaset.


Amperage Capacity150 200 250 300 500

AF-1

TI-1 010472

•

AF-2 •

AF-25 •

AF-3 TI-2 010526 •

AF-50 TI-3 010571 •

Replacement Parts for Myclass™


MatchyourPearson®electrodeholdertotheelectrodesizeandamperageusedforgreatestefficiency.



www.oki-bering.com

340

6

Wel

ding

Acc

esso

ries

Electrode Holders


Amperage Capacity


JH-1 011370 250 Upto3/16 4.8 1/0 50 8 215 15 430AW-C 011424 300 Upto1/4 6.4 2/0 70 10 250 22 610A3-S 011479 500 Upto3/8 10 4/0 105 13 325 32 900

Part No. JH-1 Part No. AW-C Part No. A3-S

Proclass™

Production Class• 10percarton.

Replacement Parts for Proclass™




Amperage Capacity200 300 500

JH-1 TI-9 012377 •

AW-C TI-10 012421 •

A3-S TI-11 012476 •


Electrode HoldersSTUB™- Twist type (Stub Nose)• Lightweightandeasy-to-use.• Bettermaneuverability-greatfortightplaces.• Excellentforverticalwelding(Optimaltype).• Madefromhighqualitymaterialsforbothhigh

conductivityandimprovedcableconnections.• Efficientgroovedjawdesigninsures

firmelectrodegrip.• Angle-headallowsexcellentvisibilityof

productionwork(stubtype).• Fullyinsulated,highstrengthspringfor

excellentgrippingpower.• Heavy-duty,shock-proofnylonhandle.• Suppliedwithanallenwrenchandcable

ferruleassuringefficientconnectionandminimizingcablestrandbreakageattheconnection.

• 10percarton.

Part No. 40-B


Amperage Capacity


40-B 007663 400 Upto3/16 4.8 3/0 95 8-3/4 220 17 490

Replacement Part for STUB™

Head AssemblyModel No. Part No. UPC No.

0 27719Amperage Capacity

40-B 40-B-HA 011271 400

Part No. 40-B-HA


www.oki-bering.com

341

6

Welding Accessories

Electrode Holders

SupraGrip™

• Madefromhighqualitymaterialsforbothhighconductivityandimprovedcableconnections.

• Heavy-dutymodelsareavailableinwiderangeofsizesandcapacities(200-600amp.)foraccommodatingelectrodesfrom1/16"(1.5mm)through3/8"(10mm).

• Bettermaneuverability-greatfortightplaces.• Excellentforverticalwelding.• Straight-headallowsexcellentvisibilityof

productionwork.• Highstrength,heavy-duty,fully-insulatedshock

proofhandle.• Suppliedwithanallenwrenchandcableconnection


• Newlydesignedelectrodeholder.• 10percarton.

Part No. SG-40


AMP Capacity


SG-20 002668 200 Upto5/32 4.0 #1 35 8-3/4 220 12 330SG-40 002682 400 Upto5/16 8.0 3/0 95 10-1/4 260 19 530SG-60 002712 600 Upto3/8 10.0 4/0 105 10-3/4 275 23 630


Part No. HM-30


Handyman™

• Lightweightandeasy-to-use.• Economicallypricedandavailableintwomostpopularmodels

(200&300amp.)foraccommodatingelectrodesupto3/16"(4.8mm).• Efficientgroovedjawdesigninsuresfirmelectrodegrip.• Fullyinsulated,highstrengthspringforexcellentgrippingpower.• Heavy-duty,shock-proofnylonhandle.• Suppliedwithanallenwrenchandcableconnection


• 10percarton.


AMPCapacity


HM-20 028231 200 Upto5/32 4.0 #1 35 8 200 11 310HM-30 028293 300 Upto3/16 4.8 2/0 70 9-1/4 235 14 380

Replacement Parts for Handyman™



Amperage Capacity200 250 300 400

HM-20TI-14 002736

•HM-30 •


Amperage Capacity150 200 250 400 600

SG-20 SG-20-HA 002774 •SG-40 SG-40-HA 002781 •SG-60 SG-60-HA 002811 •

Replacement Parts for SupraGrip™

Head Assembly• Upperandlowertipinsulatorsaresoldasaset.


AMP Capacity150 200 250 300 350 400 500

TI-1AF-1

010472•

AF-2 •AF-25 •

TI-2 AF-3 010526 •TI-3 AF-50 010571 •

TI-4PA-532

010625•

PA-316 •

TI-5PA-732

010670•

PA-14 •PA-14-HD •

TI-6 PA-38-HD 010724 •

TI-7UT-20

012278•

UT-30 •TI-8 UT-40 012322 •TI-9 JH-1 012377 •TI-10 AW-C 012421 •TI-11 A3-S 012476 •

TI-14HM-20

002736•

HM-30 •


Top

Bottom



Amperage Capacity


JH-1 011370 250 Upto3/16 4.8 1/0 50 8 215 15 430AW-C 011424 300 Upto1/4 6.4 2/0 70 10 250 22 610A3-S 011479 500 Upto3/8 10 4/0 105 13 325 32 900

www.oki-bering.com

342

6

Wel

ding

Acc

esso

ries

Ground Clamps

Part No. EG-200 Part No. EG-300 Part No. EG-500

Part No. MGC-300 Part No. MGC-500


AMP Capacity

Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams

EG-200 007762 200 Upto1-1/2 40 6-4 10-16 7 175 8 210

EG-300 007816 300 Upto2 50 2-1 25-35 8 200 14 390

EG-500 007861 500 Upto2 50 1/0-4/0 50-105 10 245 17 490


AMP Capacity

Cable Capacity WeightAWG mm2 oz. grams

MGC-300 008219 300 1-1/0 35-50 21 600

MGC-500 008264 500 2/0-4/0 50-105 22 623

Part No. LGC-200 Part No. LGC-300 Part No. LGC-500


AMP Capacity


LGC Series LGC-200 008066 200 Upto1 25 1-1/0 35-50 5-1/4 130 12 340

LGC-300 008110 300 Upto1-1/2 40 1/0-3/0 50-95 7-1/4 180 21 600

LGC-500 008165 500 Upto1-1/2 40 2/0-4/0 70-105 8 200 23 652

Part No. PGC-200 Part No. PGC-300 Part No. PGC-500


AMPCapacity


PGC Series PGC-200 007915 200 Upto1 25 1-1/0 35-50 6 150 16 445

PGC-300 007960 300 Upto1-1/2 40 1/0-3/0 50-95 8 200 25 715

PGC-500 008011 500 Upto2 50 2/0-4/0 70-105 9 225 35 990

Part No. GC-2 Part No. GC-3 Part No. GC-5


AMPCapacity


GC Series GC-2 011721 200 Upto1 25 4-1/0 16-50 7 175 17 490

GC-3 011776 300 Upto1-1/2 40 1/0-2/0 50-70 8-1/2 210 22 630

GC-5 011820 500 Upto1-1/2 40 2/0-4/0 70-105 9-1/2 235 28 800

Ground Clamps• Pearson®groundclampscomeinarange

ofmodels-fromlightweighttoheavyduty,highcapacitymodels.

• Suppliedwithanallenwrenchandcableconnectionferruleassuringefficientconnectionandminimizingcablestrandbreakageattheconnection.

PGC, LGC and GC Series• Contouredhandleleverforeasyjawopening.• Stronggrippingpower.• Largecontactareaassurespositivegrounding.• Fullyinsulatedspring.• Conductorbodyholdsthecablesecurely.• Largehexscrewcableconnectionassures

safecableconnectioneverytime.• 10percarton.

Ground Clamps• Uniquedesignhelpseliminatearcblowand

makesiteasytochangegroundlocationforthebestresults.

• Largecontactareaassurespositivegrounding.

Steel Ground Clamps- EG Series• Zincplated.• Largehexscrewcableconnection

assuressafecableconnectioneverytime.• PurecopperbraidedshuntsonEG-500-allows

bothjawstocarryweldingcurrent.• 10percarton.

Magnetic Ground Clamps- MGC Series• Largecontactareaassuresexcellent

electricalcontact.• Stronggrippingpower:

Pullstrength=130Gauss.• Groundingconcealedtoprevent

dislodgement.• Insulatedtopreventannealing.• Easyinstallationorremoval.• Mostpopularmagneticground

clampsinthemarket.• 10percarton.


www.oki-bering.com

343

6

Welding Accessories

Battery Clamps / Cable Connectors and Adapters

Battery Clamps• Excellentelectricalandphysicalproperties.• Allsteeljaws.• Hammer-oncopperconnection.• Heavydutytensionspringgivespositive

connectiononfrontandside.• Vinylinsulationthatishighlyresistanttooil,

acid,abrasion,chemicalsandozone• Colorcoded-redandblack.

Part No. BC-600B Part No. BC-600R

Part No. UPC No.0 27719 Description AMP

Jaw Opening Cable Capacity WeightCtn

Inches mm AWG mm2 oz. gramsBC-600 001500 Batteryclamps,set 600 Upto1-1/2 40 1-3/0 35-95 16 435 10BC-600R 001524 Batteryclamp,red 600 Upto1-1/2 40 1-3/0 35-95 8 218 20BC-600B 001548 Batteryclamp,black 600 Upto1-1/2 50 1-3/0 35-95 8 218 20

Part No. DA-5095 Part No. DA-1025

Cable ConnectorsMBP Series• Designedtoefficientlyconductthecurrent

throughadetachable-typeconnection.• Cam-actiondesignallowslock-inwithatwist

andpullsthetwohalvestightlytogether.• Metalpartsareprecisionmachinedfromheavy

brassextrusion-resistsrust&corrosion.• Connectorcovershaveremarkableresistance

toheat,cold,abrasion,ozone,oils&solvents.Taperedends.Lock-outmoisture,oilanddirt.

• Connectorcoversarespeciallycompoundedtobeflameretardant.

Part No. UPC No. 0 27719

Cable CapacityCtn

AWG mm2

Male 1-MBP-1 008462 4-1 16-35 202-MBP-1 008516 1/0-3/0 50-95 204-MBP-1 008561 3/0-4/0 95-105 20Female 1-MBP-2 008615 4-1 16-35 202-MBP-2 008660 1/0-3/0 50-95 204-MBP-2 008714 3/0-4/0 95-105 20Sleeves

1-MBP-IS For:1-MBP(pair)



Part No. SK-25 Part No. BK-25





Cable CapacityCtn

AWG mm2

Euro Cable Adapter (DINSE® Style to Pearson®)DA-1025 002729 6-2 10-25 10DA-5095 009162 1/0-3/0 50-95 10


Cable CapacityCtn

AWG mm2

DINSE ® Style- Euro Cable PlugSK-25 008769 6-2 10-25 10SK-50 008813 1-1/0 35-50 10SK-70 008868 1/0-2/0 50-70 10SK-95 008912 2/0-3/0 70-95 10DINSE ® Style- Euro Cable Socket BK-25 008967 6-2 10-25 10BK-50 009018 1-1/0 35-50 10BK-70 009063 1/0-2/0 50-70 10BK-95 009117 2/0-3/0 70-95 10


Part No. UPC No. 0 27719 AMP Capacity

Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. kg.

CGC and WGC Series CGC-600 011929 600 Upto4 100 1/0-4/0 50-105 8-1/4 205 63 1.8WGC-600 011974 600 Upto4 100 1/0-4/0 50-105 9-1/2 235 58 1.64

Part No. WGC-600

WGC and CGC Series• Largecontactareaassuresexcellent

electricalcontact.• Highclampingpressure.• Highalloyconductorassuresmaximum

conductivity.• 10percarton.

Part No. CGC-600

Euro Cable Plug & Socket Dinse® Style• IntroducingthefinestinternationalDinse®style,

Eurocableplugandsocketsforuseonmostweldingpowersources.

• Simpleandsafe-justplug-inandtightenbyashort,strongturnforpositivestop-lockactionandmaximumconductivity.

Euro Cable Adapter Dinse® Style to Pearson®

• Eurocableadapter(Dinse®styletoPearson®)allowstointerconnectwithmostothertypesofU.S.Cableconnectors-allowscompleteflexibility.


Cable CapacityCtn

AWG mm2

MBP Series (paired)1-MBP 008318 4-1 16-35 102-MBP 008363 1/0-3/0 50-95 104-MBP 008417 3/0-4/0 95-105 10

www.oki-bering.com

344

6

Wel

ding

Acc

esso

ries

Cable Connectors / Cable Lugs / Crimping Tools

Cable Connectors and Cable LugsEuro Machine Panel Plug & Panel Socket Dinse® Style• Designedtoefficientlyconductcurrentonthe

widestrangeofweldingunitsandinverter-basedpowersources.

• Simpleandsafe-justplug-inandtightenbyashort,strongturnforpositivestop-lockactionandmaximumconductivity.

Part No. SE-1025

Part No. SE-3570

Part No. BE-1025

Part No. BE-3570 Part No. BE-7095


Cable CapacityCtn

AWG mm2

Panel Plug

SE-1025 009216 6-2 10-25 10

SE-3570 009261 1-2/0 35-70 10Panel Socket

BE-1025 009315 6-2 10-25 10

BE-3570 009360 1-2/0 35-70 10

BE-7095 009414 2/0-3/0 70-95 10

Cable LugsSolder Type• Precisionmadefromcoppertubing.• Extralongbarrelforeasysolderingorpossible

connection.• Easytouse-flared-endforeasy

cableaccess. L-68L-46 L-62 L-120 L-3040

Hammer-on Type• Easyandconvenienttouse-nospecialtools

required.• Hammerblowmakesasolidconnection.• Excellentpull-outstrengthwithoutsoldering

orbolting.HL-1020HL-21 HL-62

Crimpler™ Heavy-Duty Crimping Tool• Heavyduty,doubleslidesupportforrigidity.• Durablespring-loadedmechanismholds

terminal/luginplace.• Delivers1400-1800lbs.(635-815kg.)pull-out

resistance(terminaltocable).• Deepthroatforeasyinsertionofterminal/lug

fittedoncableend.• Easy-to-readscaleonbothsidesofdrivepunch

preventsunder-crimping.• Widebaseforstability-excellentforwelding

toabumperoffleetservicetruckorforboltingtoabench.

Part No. CM-20


AMPCapacity

Cable Capacity Stud Hole I.D. of SocketPcs./Card Ctn

AWG mm2 Inches mm Inches mmL-68* 012025 75 6-8 8-10 21/64 8.3 10/32 8.0 10 10

L-46* 012070 100 4-6 10-16 21/64 8.3 11/32 8.5 10 10

L-62* 009469 150 6-2 10-25 17/32 13.5 1/2 13 10 5

L-120* 009513 200 1-2/0 35-70 17/32 13.5 35/64 14 10 5

L-3040* 009568 250 3/0-4/0 95-105 17/32 13.5 5/8 16 5 5


AMP Capacity

Cable Capacity Stud Hole I.D. of SocketPcs./Card Ctn

AWG mm2 Inches mm Inches mmHL-62* 012124 150 6-2 10-25 17/32 13.5 1/2 13 10 5

HL-21* 009766 200 2-1 25-35 17/32 13.5 1/2 13 5 5

HL-1020* 009810 300 1/0-2/0 50-70 17/32 13.5 35/64 14 5 5

HL-3040* 009865 500 3/0-4/0 95-105 17/32 13.5 5/8 16 5 5

Part No. UPC No.0 27719 Description

Cable Capacity Jaw Opening Weight

AWG mm2 Inches mm oz. grams

CM-20 004761 Crimpingtool 6-4/0 10-105 Upto1 25 24 680

Part Nos.

Part Nos.

*Alsoavailableinbulk.

*Alsoavailableinbulk.


www.oki-bering.com

345

6

Welding Accessories

4-Way Pick Set• Knurled5"(125mm)aluminumhandle.• Fourtemperedsteelpicks3"(75mm)longscrewintohandle.• Comeswithhandyvinylprotectivecase.• Idealfor: -Removestuckpartsfromtightareas. -Retrievelostnuts,bolts,washers,toolsetc. -ReplaceO-rings. -Idealfordielayouts. -Markingyourtools.• 10percarton.Part No. PS-4 (UPC No. 0 27719 03381 5)

Ratch-It Tie Downs with ChainsRT-112 and RT-115• Ratedcapacity:

RT-112-1,500lbs/680kg(averagestrapstrength)RT-115-3,000lbs/1360kg(averagestrapstrength)

• QuickAutomaticRelease.• Rustresistant,cadmiumplatedsteelhardware.• Weatherresistantstraps. Vinylcoatedhooksateachend

thatwon’tscratch(RT-112).• Highstrength,brightsafetyyellow

webbingwithhookateachendtoattachdirectlyorloopbackonto“D”ring(RT-115).

• RT-112Sisexcellentfor“SingleHandedUse”(Comeswithoutendhooks).

RT-215 and RT-227• Ratedathighcapacity. RT-215-5,000lbs/2270kg(averagestrapstrength). RT-227-10,000lbs/4540kg(averagestrapstrength).• Fullyadjustableratchettie

downusedtosecurelarge,heavyorbulkyloads.

• Webbingismadewithstrong,lightweightandrugged100%polyester,identifiedbybrightyellowsafetystrap.

RT-212C and RT-227C• Ratedathighcapacity: RT-215C-10,000lbs/4540kg(averagestrapstrength). RT-227C-15,000lbs/6800kg(averagestrapstrength).• Fullyadjustableforsecuring

large,heavyorbulkyloads.• Rustresistant,cadmium

platedsteelhardware.• Heavy-dutyanchorchainateachendwithgrabhook.• Extra-wideandlongratchethandleprovidesextraleverage.• Weatherresistantstraps.• Strong,lightweightandrugged100%polyesterwebbing,Identifiedbybright

yellowsafetystraps.• RT-212Ccomeswithratchethandleprotector:Heavydutysewnfabricpad

usedtoprotectsurfacefinishofcargoandratchetmechanismratchethandleprotectors,wearpadshelpprotectcargoandextendlifeofthetiedown.

Part No. UPC No. 0 27719 Size (ft) W x L Grab Hook Max. Cap. (Lbs.) Avg. Strap (Kg) Weight (Lbs.) Ctn/Case Pack

RT-112 006864 1"x12' 5/16" 1,500 680 1 10/40

RT-115 006918 1"x15' 3,000 1360 1.5 10/20

RT-215 006963 2"x15' 5,000 2270 6.5 1/5

RT-227 007113 2"x27' 10,000 4540 7 1/5

RT-212C 007168 2"x12'(chain5/16"x12") 5/16" 10,000 4540 7.85 1/5

RT-227C 007212 2"x27'(chain3/8"x12") 3/8" 15,000 6800 11.25 1/5

Rubber Tarp Straps• Superstrengthcompoundedrubberlastslonger.• Ozone,weather,wear,tearandabrasionresistant.• Resistsdeteriorationinoutdoorenvironments.• Reinforcedends.• Cadmiumplatedsturdysteel“S”hooks.• 10percarton.• 100percasepack.

Part No. UPC No. 0 27719 Length

RS-21 017594 21"

RS-31 017600 31"

RS-41 017617 41"

Part No. RT-112

Part No. RT-115

Part No. RT-215

Part No. RT-227C

21"

31"

41"

Picks / Tie Downs / Tarp Straps


www.oki-bering.com

346

6

Wel

ding

Acc

esso

ries

Cam-Type and Fillet Weld Gage / Lightnin’ Bug

MasterGage™

• Highqualitystainlesssteel(sus304)bladestoresistrustandforlongerlife.

• Permitsquickandaccuratemeasuringofthemostpopularweldfilletsizesininchandmetric:1/8"-1"(3.2-25.4mm).

• Forinspectionofconcaveorconvexfilletwelds.• Bladesaredeburredforfineandsmoothedges.• Allsizesandnumeralsarelaseretchedintothe

surfaceforclarityandeasierreading.• Setofsevenbladescomesinahandy,vinylpocket

casewithsnaplock.• Measurementsarepossibleeitherininchesor

millimeters.Generallinearmeasurementsupto2"(50mm).

• 10percarton.Part No. MG-8: Cam-typeweldgage (UPCNo.027719012780)Part No. MG-11: Filletweldgage (UPCNo.027719012797)

Back View

Part No. MG-11

Part No. MG-8

FilletWeldThroatSize AngleofPreparation(0°To60°) Misalignment(High-low)

DepthofUndercut ExcessWeldMetal(CappingSize) FilletLegLength

Important Note:MasterGage™weldinggagesareintendedforgeneraldimensionalinspectionofweldedfabricationswhereclosetolerancesarenotexpected.Theyshouldnotbecomparedinprecisionwithgagesusedformeasuringmachinedcomponentsandwherehighestdegreeofaccuracyisrequired.Whereextremelyprecisemeasurementsarerequired,machineshopprecisionmeasuringinstruments,preferablyelectronicordigitalmustbeused.

Guide for Taking Measurements with MasterGage™

Fillet Weld Gage

Cam-Type Weld Gage

MG-8 MG-11

Lightnin’ Bug® Torch Lighter• Testedto30,000strikes.• Lightnin’Bug®isthehottestlittletorchlighteronthemarket.Itselectricmulti-sparkdischargeignites

allfuelgasesquicklyandeasily.• TheamazingnewenergygeneratorusedinLightnin’Bug®neverneedsflints,batteriesorcharging.• Easyandaccurateignitioninsuredbymulti-sparkdischarge:

5timesormorepersqueeze.• Durable:madeofhighqualitymaterials,theLightnin’Bug®

withstandssevereworkingconditions.Itszincplatedbodyresistsrustandcorrosion.

• Versatile:Lightnin’Bug®ignitesalmostallindustrialfuelgases,suchasoxy-acetylene,naturalgas,propane,methane,MAPP®,propylene,etc.

• 10percartonPart No. 08-100 (UPC No. 0 27719 01319 0)

Lightnin’Bug®isregisteredtrademarkofWorldwideWelding,Inc.


www.oki-bering.com

347

6

Welding Accessories

Tip Drill Kit – 12 Piece• Mostpracticaltipcleaningtoolmade.• Cleansandtruesmoststandardorifices.• Containsmostcommonlyused12drills(#52-74)

inassortedsizes.• Completewithbuilt-inchuckand

pocketclip.• 10percarton.Part No. TDK-12 (UPC No. 0 27719 00122 7)

Tip Cleaners / Tip Drill Kit / Tip Refacing Tool / Key Ring

Tip Cleaners• Rustproof,stainlesssteelwire.• Fileincludedinthecase.• Uniformridgeswipeandpolishtheorificewall.• Tanglefreeloops.• Tapered-endsallowsmootheasyentrywithoutscratching.• 10percarton.

Standard, DeluxeSetof13cleanerswithfile.• Gagesizes:6through26forcleaning

drillsize:77-49.Part No. 0STC (UPC No. 27719 01714 3)

King SizeSetof13extra-longcleanerswithfile.• Gagesizes:6through26forcleaning

drillsize:77-49.Part No. 0KTC (UPC No. 27719 01715 0)

JumboSetof9cleanerswithfile.• Gagesizes:28through45forcleaning

drillsize:48-30.Part No. 0JTC (UPC No. 27719 00198 2)

MasterSetof22cleanerscombinesallstandardandjumbosizeswithfile.• Gagesizes:6through45forcleaning

drillsize:77-30.Part No. 0MTC (UPC No. 27719 01716 7)

Gage Wire Dia. Ridge Dia.Cleans Hole

Diameter (inch) Drill Size

Stan

dard

(STC

) and

Kin

g Se

ts (K

TC)

6 0.014 0.016 .018-.020 77-76

7 0.018 0.020 .021-.022 75-74

8 0.021 0.023 .024-.026 73-71

10 0.024 0.026 .028-.031 70-68

12 0.028 0.030 .032-.035 67-65

14 0.032 0.034 .036-.038 64-62

15 0.035 0.038 .039-.040 61-60

16 0.037 0.040 .041-.042 59-58

17 0.039 0.042 .043-.046 57

18 0.042 0.044 .046-.051 56

22 0.048 0.050 .052-.055 55-54

24 0.055 0.057 .060-.064 53-52

26 0.062 0.065 .067-.073 51-49

Jum

bo S

et

28 0.069 0.075 .076-.078 48-47

30 0.074 0.080 .081-.082 46-45

32 0.078 0.085 .086-.089 44-43

34 0.085 0.092 .094-.096 42-41

37 0.090 0.096 .100-.102 39-38

39 0.095 0.102 .104-.106 37-36

42 0.102 0.108 .110-.113 35-33

44 0.108 0.114 .116-.120 32-31

45 0.102 0.126 .128+ 30+

Tip Refacing Tool• Revolutionarytoolthateliminatesscale,slagand

orificedistortionfromcuttingtipfaces.• Justafewquickturnsandthetipsterrestoresthe

faceofyourtipstotheirclean,originalcondition.• Holdingthetipintheproperrefacingpositionis

easywiththetough,nylonshell.• 10percarton.Part No. TR-38 (UPC No. 0 27719 00110 4)

Mas

ter S

et (O

MTC

)

Welder’s Pin Key Ring• Handyforweldersandrepairmen-keysaresafeandsecure.• Attacheseasilytoastrap,beltlooporahandle.• Madefromhighqualitysteelwithhighlustrebrassfinish.• Resistsrustandcorrosion.• Individuallypoly-bagged.Part No. BK-110


www.oki-bering.com

348

6

Wel

ding

Acc

esso

ries


Medical & MIG Cart / Spark Lighters

Cadymate Cylinder Container• Holds10lb.cylinders.• Storagespaceinwinder.Part No. CM-1020

Medical Cart• Willhold1DorEcylinder.Part No. MC-1DE

MIG Welding Cart• 3Shelves.• Casterwheels.• Weightcapacity125lbs.Part No. WC-1228

Handyguard• Holdsupto10lbs.of12"or14"electrodes.• Withstandstemperaturesupto225˚F(107˚C).Part No. HG-14-14"Part No. HG-18 -18"Part No. HG-36 -36"

Single Flint and Triple Flint Spark Lighters• Rounded-filesparklightersfeature

thelargesthoodandroundfileintheindustry.

• Triple-flintlighterisaqualitylightermadeforthedemandoftheweldingindustry.Ithasastrongframeandwiththreelargeflintsmakesdependableignitionunderallweatherconditions.

• Enduringpopularityismeritedbydependableperformance,easeofoperation,lightweightandlow-cost.

Part No. UPC No. 0 27719 Description Ctn/Case

2001 000022 Singleflintsparklighter,bulk(boxed) 10/100

2001-C 000039 Singleflintsparklighter,carded 10

2001F 000220 Replacementflintsforsingleflintsparklighter,(5pcs./Holder),20holders/box(bulk) 5/50

2001F-C 000237 Replacementflintsforsingleflintsparklighter,(5pcs./Holder),1holder/card

2001F-C2 000244 Replacementflintsforsingleflintsparklighter,(5pcs./Holder),2holders/card 10

4501 000046 Tripleflintsparklighter,bulk(boxed) 10/100

4501-C 000053 Tripleflintsparklighter,carded 10

4501F 000251 Replacementflintsfortripleflintsparklighter,bulk(boxed) 100/1000

4501F-C 000527 Replacementflintsfortripleflintsparklighter,carded(1pcs./Card) 10

4501F-C5 000534 Replacementflintsfortripleflintsparklighter,carded(5pcs./Card) 10

Part No. 4501FPart No. 4501Part No. 2001 Part No. 2001F

www.oki-bering.com

514

9

Hand

Too

ls

MSA, PearsonVendor Code: MSA, PEA

Weld Clamp 9", 2-Jaw• Holdspartsinproperalignment-evenwhen

materialisnotofidenticalthickness.• Positivelockleaveshandsfree.• Deep-throatedU-shapedjawsprovide

perfectvisibility.• 10percartonPartNo.WC-9(UPCNo.027719001258)

Malleable Iron C-Clamps• Newdesignframeformaximumstrength.• Steelspindlesarecopperplatedforspatterprotection.• Swivelpadsadjustfreelytobearevenlyonclampedpart.• Lacqueredfinish.Part No. CC-6Part No. CC-5

General Accessories / Locking Pliers / C-Clamps

Locking Pliers, 6" and 11"• Highgradealloysteelformaximumdurability

andperformance.• Micro-adjustmentforquick

pre-adjustingandrepeatclamping.• Powerfullockingmechanismprevents

slippage.• Jawsopenwideforversatility.• Lockssecurelywithhandsqueeze.• Easy-releasetrigger.• 10percartonPartNo.LC-6(UPCNo.027719001388)PartNo.LC-11(UPCNo.027719001371)

Locking Sheet Metal Tool, 8"• Lockstoworkwithpowerfulgripforsmoothand

accuratebendingandseaming.• Micro-adjustingscrewandeasy

releasetrigger.• Lockstoworkwithpowerfulgrip.• Makesallkindsofbending,formingandcrimping

jobsfasterandeasier.• 10percartonPartNo.LS-8(UPCNo.027719001395)


Throat Capacity Depth Spindle Dia.Ctn

Inches mm Inches mm Inches mm

CC-2 000541 0-2 0-50 1-1/8 28 7/16 11 10

CC-3 000558 0-3 0-75 1-5/8 40 7/16 11 10

CC-4 001074 0-4 0-100 2-1/4 56 7/16 11 10

CC-5 001081 0-5-1/4 0-130 2-5/8 65 1/2 13 10

CC-6 001098 0-5-7/8 0-147 3-1/4 83 5/8 16 10

Heavy Duty, Drop Forged C-Clamps• Rugged,heavydutydropforgedsteelframe.• Non-slipclampingonallshapes.• Extrathroatdepth.• Steelspindlesarecopper

platedforspatterprotection.• Swivelpadsadjustfreelyto

bearevenlyonclampedpart.• Lacqueredfinish.• Individuallyboxedforeasy

storageandprotection.Part No. 412PPart No. 410PPart No. 408P


Throat Capacity Depth Spindle Dia. Proof TestCtn

Inches mm Inches mm Inches mm lbs. Kg

402P 013336 0-2-1/8 0-54 2-1/4 57 9/16 14 3500 1590 20

404P 013343 0-4-1/2 0-114 3-1/4 83 3/4 19 6200 2810 10

406P 013367 0-6-1/16 0-154 4-1/8 105 3/4 19 6900 3130 10

408P 013374 0-8-1/4 0-210 5 127 3/4 19 6600 3000 5

410P 013381 2-10-1/8 50-257 6 152 3/4 19 8000 3630 5

412P 013411 2-12-1/4 50-311 6-5/16 160 7/8 22 9300 4220 5

Hands-Off™ Chisel GripTheHands-Off™ChiselGripkeepshandsawayfromthepointofcontact.Itisergonomicallydesignedtomatchthespecificshapeofthehumanhandforacomfortableandfirmgrip.• Economicalandpermitsfaster,safer,moreaccuratework.• Easyadjustmenttoholdavarietyofchiselsandstakesupto1"diameter.• Vibration-absorbinghandle.• Easesawkwardhandpositioning.• Sparkresistant.Part No. 10040018

Ergonomic Tool Holders• Holdswrenches,chisels,etc.• Vibration-absorbingdesign,• Attachtobroomhandlesandmopsforbettergrip.• Easesawkwardhandpositioning.

Part No. Description

507005 ToolHolder,18"

507006 ToolHolder,sparkresistant,18"

www.oki-bering.com

515

9

Hand Tools

Magnet with Telescopic Handle, 30" Reach• Lifts10lbs.(4.5kg).• Telescopesfrom7"(180mm)to30"(760mm).• Telescopichandleislightweightandstrong.• Capshieldsthesidesofthemagnetfromattaching

tounwantedmetalsurfaces.• Comfortabletexturedcushiongripkeepshandle

secureeveninwetoroilyhands.• Pocketclipkeepsithandyandsecure.Part No. TM-10 (UPC No. 0 27719 00283 5) 10percartonPart No. TM-10-B (bulk, case pack only) 100percarton

Part No. UPC No.0 27719 AMP Capacity

Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. kg.

CGC and WGC Series CGC-600 011929 600 Upto4 100 1/0-4/0 50-105 8-1/4 205 63 1.8

WGC-600 011974 600 Upto4 100 1/0-4/0 50-105 9-1/2 235 58 1.64

Part No. WGC-600

WGC and CGC Series• Largecontactareaassuresexcellentelectricalcontact.• Highclampingpressure.• Highalloyconductorassuresmaximumconductivity.• 10percarton.


Welpers / Clamps / Telescoping and Magnetic Tools

Mirror with Flex Handle, 15" Reach• Fast,accuratevisualinspectionofhiddenareas.• Offerslimitlessnumberofpositions.• Withstandsthestressesofconstantrepositioning.• Non-sliphandle.• 10percarton.Part No. FM-15 (UPC No. 0 27719 00123 4)

Magnet with Flex Handle, 15" Reach• Neodymium-Iron-Boronextrahighfluxmagnet

forgreaterpick-up.• OutperformsstandardAlincoVmagnet4to1.• Powerfulenoughtopickupferrousobjects

weighing1.5lbs(680g).• Long15"(380mm)overallreach.• Perfecttooltopickupferrousmetalobjectsin

hard-to-reachanglesandremoteareas.• Abendablecoppershaftenablesyoutoretrieve

athard-to-reachanglesandaroundobjects.• 10percarton.Part No. FM-14 (UPC No. 0 27719 00123 4)

Mirror with Telescoping Handle, 15" Reach• Fast,accuratevisualinspectionofhiddenareas.• Almostofferslimitlessnumberofpositions.• Doubleballjointlinksswivelmirrorsforviewingto360˚.• Non-rotatinghexrodspreventmirrorfromswingingoutof

alignmentwheninuse.• Precisionengineeredlinkswithstandthestressesof

constantrepositioning,movefreely,holddesiredposition.• Insulatingvinylgrip.• Mirrorsize:2-1/8"x3-1/2"(52mmx88mm)• Overalllength:11"(280mm),extendsto15"(380mm).Part No. OK-2 (UPC No. 0 27719 00286 6)10percartonPart No. K-2-B (bulk, case pack only)100percarton

Welper® YS-50 MIG Plier • Specialtymulti-purposetooldesignedspecificallyforCO2weldingoperations.• AsinglepairwhichserveseightpurposesforMIGwelding-savestimeandincreasesproductivity.• Designedforhammering,wirecutting,insulationbushingremoval&installationanddrawingoutwire.• Ideallysuitedfortheremovalofspatterfrominside,outsideandthenozzle-end.• Perfectforremovalandinstallationofcontacttipsandnozzles.• Springloadedforeasyopeningandclosing.• Manufacturedfromhighquality

carbonsteelforstrengthanddurability.• ThegenuineMIGplier(worldwide

patented).• Convenientblisterpackagingfor

“point-of-purchase”display.• 10percarton.

Part No. YS-55


Weightoz. grams

YS-20 032610 Plier,mini-MIG 6.4 181

YS-25 002828 HolsterforYS-20

YS-50 004563 Welper™,MIGplier 10 285

YS-55 004617 HolsterforYS-50

Part No. YS-50

Part No. CGC-600

www.oki-bering.com

516

9

Hand

Too

ls

Barracutter™ Cable Cutter• Highcarbonsteelhandshearforcuttingweldingcablethrough4/0(105mm2),

powercablethrough6/4(65mm)andrubberhosethrough1/2"(13mm).• Excellentformaintenance,repair,rigging,fabrication,toolcribs,out-fitting

splicingandmanyothers.• Nojawstoreplace.• Heavyvinylcoveredsafetyhandles.• 10percarton

Caution:Designedforcopperandaluminumcablesonly.

Part No. UPC No. 0 27719Cable CapacityAWG mm2

B-52 004815 6-4/0 10-105


Clitch™ Cable HitchHookedtoasupportneartheworkarea,theClitch™freesthewelderfromthecableweight.Itallowsthecabletobepulledthroughbutwillnotletitslipback.• Madetofitcablesize: -AWG#2(25mm2)throughAWG4/0(105mm2)or -5/8"(16mm)through7/8"(22mm)indiameter.• 10percarton.Part No. CH-240

Part No. UPC No. 0 27719Cable CapacityAWG mm2

CH-240 001555 2-4/0 25-105

Chipping Hammers / Cable Cutters / Cable Hitch

Weld-Cleaning Tools (Chipping Hammers)• Completelineofweld-cleaningtools-

eachtooldesignedforspecialapplication.

• Manufacturedunderarigidqualityandsafetycontrolprogram.

• Hammerheadsarehardenedtopreciselycontrolledtemperaturesfordurabilityandstrength.

• Wide-bladedesignremovesslagfasterandaddstothelifeofthetool.

• Dropforged,heat-treated,hardenedheadwithstandsmoregrinds.

• Long,slenderconesassureeasyslagremoval.

• Welded-on-headtosteelshaft-preventsheadfromcomingloose.

• Well-balancedhandlegripforcomfortandease-of-use.

• 10percarton.

000H 7002 000A 00AW WH-20 WH-30


Length WeightInches mm oz. grams

0H-E Coneandchisel,coilhandleeconomymodel 12 290 14 397000H 010069 Coneandchisel,coilhandleheavyduty 11 280 16 440G-E-BULK Coneandcrosschisel,coilhandle,economy 11 280 15 415000G 010113 Coneandcrosschisel,coilhandle 11 280 15 415000J 010168 Coneandchisel,woodenhandle 11 280 13 3657002 010212 Coneandchisel,softgriphandle 11 280 14 397000A 010267 Brushandchisel,brushlockingthumbscrew 11 280 17 48000AW 012223 Brushandchisel,woodenhandle 12 275 17 480WH-10 006901 Chiselandcrosschisel,woodenhandle 12 275 16 440WH-20 010311 Coneandchisel,woodenhandle 13 325 23 650WH-30 010366 Coneandcrosschisel,woodenhandle 13 325 23 650WH-40 010410 Curvedconeandcurvedchisel,woodenhandle 13 325 24 680

WH-40

Chipping Hammer Replacement PartsPart No. UPC No. 0 27719 Description

CH-315 012674 Wirebrush

00WH 012629 Woodenhandle

Part No. 00WHPart No. CH-315

Part Nos. WH-10

Building ConstructionHigh Rise Ship Construction Television Towers Electrical Towers

www.oki-bering.com

568

11

Mar

king

and

Lay

out T

ools


White-Line™ Soapstone and Soapstone Holders# 1 Select, Natural Grade• Thefinestqualitysoapstoneavailableintheworld.• Allwhitetextureforexcellentmarkingquality.• Graincuttoensuregoodstrengthandlong

servicelife.• Markswillnotcontaminateweldsandare

easilyremoved.• Lowwatercontentforincreasedhardnessand

resistancetobreakage.

Soapstone HoldersAll holders come with our #1 select soapstone• Stainlesssteelbody,aluminumknob.• Steelnutholds#1selectsoapstonefirmly.• Comeswithpocketclip.

Part No. UPC No. 0 27719 Description UM Ctn.

NS-16 013107 Flatsoapstone,bulk 144pcs./pack 12/288WL-F5-6 005270 Flatsoapstone 6pcs./card 10WL-512 014302 Flatsoapstoneholder 1percard 1WL-512-B Flatsoapstoneholder,bulk casepack 100NS-16A 013114 Roundsoapstone,bulk 144pcs./pack 12/432WL-R5-10 005324 Roundsoapstone 10pcs./card 10WL-514 014319 Roundsoapstoneholder 1percard 1WL-514-B Roundsoapstoneholder,bulk casepack 100NS-16B 013121 Squaresoapstone,bulk 144pcs./pack 12/432WL-S5-10 005379 Squaresoapstone 10pcs./card 10WL-516 013435 Squaresoapstoneholder 1percard 1WL-T5 005331 Thinlinesoapstone,bulk,1/16 144pcs./pack 12/432WL-T5-10 005386 Thinlinesoapstone,1/16 10pcs./card 10WL-518 005287 Thinlinesoapstoneholder,1/16 1percard 1

WL-T5

WL-518

WL-S5

WL-516

WL-R5

WL-514

WL-F5

WL-512

Part Nos.

Part Nos.

Soapstone / Pocket Scribe / Pencils

Pocket Scribe• Lightweight,yetstrongaluminumhandle.• Sharptungstencarbidetipcutsintohardsurfaces,

leavesclearmarksonmetal,glass,plastic,toolsetc.• Comeswithprotectivetipcover-protectsagainst

damagedpoints,tornclothandpuncturedfingers.• Handypocketclip.• 10percarton.Part No. ES-4(UPCNo.027719014388)

www.oki-bering.com

667

13

Eye, Face, and Head Protection

Eclipse™ Welding Helmets• Exclusive design: contemporary profile and narrow

shell design engineered to maximize performance and enable welders to work more efficiently and comfortably with increased productivity.

• Safe to use: extended head, face, neck and ear coverage protects against sparks and slag - preventing burns and harmful ultra-violet and infra-red rays.

• Lightweight: reduces stress on welder’s neck and back muscles.

• Streamlined design: allows you to work in tight space. Easy, adjustable knobs, even with the gloves on.

• Strong and durable: withstands heavy on-the-job abuse.• Non-reflective surface: absorbs stray radiation and

avoids arc flash.• Ergonomically engineered: scientifically balanced

for easy “nod down.”• Excellent ventilation: channels smoke and fumes away

from the welder. Makes breathing easier and a unique shape that allows room for respirators.

• Unique magnifier lens holder: built-in magnifier holder is adjustable to multiple positions.

• Adaptable: to most auto-darkening filters.• Helmet includes shade 10 filter plate, safety

plate (standard size) and adjustable locking ratchet headgear with sweatband.

• Meets or exceeds ANSI Z87.1 & CE standards.

Part No. DescriptionPassive

EAD-24F 2" X 4-1/4" fixed shade 10

EAD-54F 4-1/2" x 5-1/4" fixed shade 10

ADF-24F 2" X 4-1/4" fixed shade 10

ADF-54F 4-1/2" x 5-1/4" fixed shade 10Auto-Darkening

EH-24F* 2" X 4-1/4" fixed front, fixed shade 10

EH-24L* 2" X 4-1/4" lift front, fixed shade 10

EH-54F* 4-1/2" x 5-1/4" fixed front, fixed shade 10Headgear

OERH* Adjustable ratchet headgear

Lift/Fixed-Front Combo Welding Helmets• New innovative design- single model acts as a lift

or a fixed front.• High performance, super tough and economical.• Tougher and lighter than ordinary helmets -

flexible and durable shell.• Streamlined, compact design allows welders to

get into tight places.• Features innovative integral lens holder.• Excellent resistance to welding spatter.• Pivot tabs relieve pressure on temples.• Adjustable tension for up and down shell movement

without removing helmet.• Ratchet adjustable headgear is soft and comfortable

with foam fitting vinyl sweatband.• Meets/exceeds ANSI Z87.1, CSA Z94.3, CE and

various international standards.


NS-24BF* 00202 6 Fixed front welding helmet, 2" x 4-1/4", economy, black 1

NS-24B* 02890 3 Lift/fixed front combo, welding helmet, 2" x 4-1/4", black 1

NS-45BF* 00396 2 Fixed front welding helmet, 4-1/2" x 5-1/4", economy, black 1

NS-45B* 02893 4 Lift/fixed front combo, welding helmet, 4-1/2" x 5-1/4", black 1

HS-24 00197 5 Hand held welding shield, 2" x 4-1/4" shade 10 10

RC-24 02899 6 Replacement flip-up lens cartridge, for 2" x 4-1/4" helmet 10

RC-45 02900 9 Replacement flip-up lens cartridge, or 4-1/2" x 5-1/4" helmet 10

00RH 02898 9 Adjustable ratchet headgear for helmet 10

Part No. NS-24BF

Part No. NS-45B

Welding Helmets

Part No. EH-24L

*Also available in bulk.

*Also available in bulk.

Part No. ADF-54F

Part No. HS-24

PearsonVender Code: PEA

www.oki-bering.com

Catalog

Documents

Transcript of Catalog