7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 1/15

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 2/15

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 3/15

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 4/15

Check for 90 - degree angle

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 5/15

Upper cast base marked parallel to occlusal plane.

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 6/15

Mark backside of upper cast for 90 - degree cut to base.

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 7/15

Upper cast backside trimmed perpendicular to palatal midline.

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 8/15

After 65 - degree cut of left side.

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 9/15

After 65 - degree cut on both sides.

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 10/15

After left front and right back corner cuts

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 11/15

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 12/15

Marking base of lower cast parallel to

base of upper cast. Bases are about 3inches (7.6 cm) apart

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 13/15

Trimming lower cast backside in same plane as

backside of upper cast.

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 14/15

Lower cast marked for rounded anterior trim.

7/21/2019 Cast

http://slidepdf.com/reader/full/cast55cf8c895503462b138d6747 15/15