Case Analysis Embraer Final
description
Transcript of Case Analysis Embraer Final
Global Strategic Management
Introduction
This case analysis examines the major issues and ideas from HBS case Embraer: The
Global Leader in Regional Jets1 and identifies the key attributes and characteristics of a
successful international aircraft company from Brazil. Despite many challenges and the
fact that Embraer is based in a developing country, it has grown into one of the world’s
most successful airplane manufacturers. This paper discusses the nature of the aircraft
industry and competition, the key elements of Embraer’s strategy, the WTO dispute with
Canada, and how Embraer is adapting its strategy to address future market changes.
Finally, the paper analyzes the paradox of Embraer’s rise and explores what that may
imply about its home country.
Overview of the Commercial Aircraft Industry
Using Porter’s Five Forces framework2 provides a convenient way to analyze the
dynamics of the commercial aircraft industry. The figure below shows a high level view
of the key forces, barriers to entry, supplier power, buyer power, rivalry and the threat of
substitutes. This brief analysis does not take into account the military jet, corporate jet
and the emerging “tiny jet” markets that impact the strategies of aircraft manufacturers.
Barriers to Entry are extremely high with large initial capital investments required along with extremely high fixed costs. Additionally, highly skilled workers are required and learning curves for workers and companies are long. Because the value chain is highly integrated, that is partners and suppliers work very closely with the incumbent manufacturers, a new entrant is at a distinct disadvantage. There is a high degree of customer loyalty, coupled with very high switching costs for customers.
Supplier Power is variable. Suppliers with proprietary technology or extremely specialized expertise have high power. Suppliers of certain special materials and coatings also have high power. Some commodity suppliers of materials and services have relatively low power.
Buyer Power is extremely high causing severe pricing pressure on aircraft manufacturers. The industry often experiences periods of over capacity which puts further downward pressure on prices. Customer preference and flying trends may help bolster the power of buyers in negotiating with manufacturers who have long development cycles and may have inventory which may not meet the current trends and needs of the buyers. On the other hand,
Page 2 of 16
switching costs for buyers are very high and have a fairly long time horizon .
Threat of Substitutes are low with no cost effective alternatives available for commercial jets.
Industry Rivalry is very high with two major duopolies dominating the industry: Airbus vs. Boeing in large jets and Embraer vs. Bombardier in regional jets. Long development lead times mean that every new model is critical to the success of the vendor and any misstep could spell disaster. Long development lead times mean rivals can plan counter-moves well in advance and catch an emerging trend while a competitor may already be committed to a certain direction.
SUPPLIER POWER Specialized Suppliers
Importance of supplier partnerships Impact of inputs on cost or differentiation Lack of substitute inputs Some Threat of forward integration Ample set of technology providers
BARRIERSTO ENTRY
Very High Costs of Entry Initial Capital Investment High Fixed Costs
Long Learning curve Government support requiredSkilled Engineers/Technical Brand Loyalty Customer Switching Costs Access to technology partners (Integrated Value Chain)Incumbent RetaliationProprietary Products
RIVALRY Strong rivalry between players Duopolies in 2 segments (Boeing vs. Airbus – Large Jets Embraer vs. Bombardier – Regional Jets) Cyclical Industry Intermittent Overcapacity High Switching Costs Brand identity Long Development Cycle
Times (Rivals can plan counter-
moves)
THREAT OFSUBSTITUTES
No compelling or adequate substitutes for commercial jets: Trains Automobiles Ships Helicopters Customer Switching Costs are very high
BUYER POWER Customers - Bargaining leverage Buyer Power is High Buyer has transparent information Brand identity Price sensitivity Require Product differentiation Buyer concentration vs. industry Buyers' incentives(option)
Diagram of Porter's 5 Forces for the Commercial Aircraft Industry
Page 3 of 16
Another useful framework for analyzing the commercial aircraft industry is from the
point of view of “disruptive technology” as introduced by Clayton Christensen4. The
commercial aircraft industry is dynamic and subject to the forces mentioned earlier.
Vendors in this industry need to be cognizant not of economic factors that impact buyers
(airlines) but also passenger preference trends. A keen awareness of passenger trends
allows vendors to understand market dynamics and sustain or improve their current
position. Furthermore, an appreciation of the role disruptive innovation may leads
manufacturers to discover new opportunities and future sales.
As applied to the aircraft industry, Christensen’s model could be represented as in the
graph below:
Page 4 of 16
From the analysis, Embraer could choose to compete with the Airbus 320 and Boeing
737 in some sectors. With superior operating margins, Embraer presents a compelling
case for airlines to consider Embraer aircraft to assemble lighter and more efficient fleets.
Based on the previous Porter analysis, the reaction of the incumbent vendors must be
considered. Although one would expect them to “defend” their “turf”, the Airbus 320
and Boeing 737 are larger aircraft and more expensive to operate. However, according to
Embraer CEO Botelho, entering the 135 seat market is not in the cards for Embraer as
this would mean “jumping into the big dogs’ market”, a reference to Airbus and Boeing8.
Rather, he would prefer to diversify into the defense market and expand in the business
jet market.
Core Elements of Embraer’s Strategy
Embraer’s core strategy can be summarized by the following bullets:
Interdependence with Brazilian Government Focus on Regional Jet Market
“Family” Approach to Product Development
Cultivate relationships and risk share with technology partners and parts suppliers
Focus on “Intelligent Systems”, Engineering Project Management
Risk Partner and Supplier Strategy
“Intelligent Systems”
Interdependence with Brazilian Government
Embraer was founded by the Brazilian government and the company is a source of
national pride. In 1994, after privatization, the Brazilian government continued to
provide subsidies in the form of loans to Embraer to provide capital funds to start new
Page 5 of 16
initiatives. As quoted by CEO Botelho at the end of the case study, “We want to keep on
being the technological and industrial arm of the Brazilian government, although of
course, we have to make profits.”1 Embraer recognizes the role its home country plays
and the fact the United States, home country to its largest customers, is not going to
provide the type of the support that Brazil will.
Focus on Regional Jet Market
In the commercial aircraft market, Embraer produces planes exclusively for the
Regional Jet market. Embraer provides aircraft that are less expensive to produce and
operate than its main competitor, Bombardier. Airbus and Boeing make larger aircraft
and do not compete in the regional jet market. In the past few years, Embraer has
updated its strategy to focus on the 70 to 110 seat market as portrayed on their website:
www.ruleof70to110.com/main/index.html. Embraer’s campaign points out inefficiencies
of flying planes that are too large for regional flights or too small to handle the increase
in demand for regional flights. Their claim is that the 70 to 110 seat plane fills a void for
customers. Embraer not only provides less expensive planes, they have developed
roomier planes with innovations such as the “double-bubble” design8 that allows more
head room and larger cabin space for passengers. Another part of Embraer’s strategy is
to use larger regional jet aircraft to replace the aging fleet of planes that may be too large
to operate on the increasing number of short-haul routes. In a sense, Embraer is
preparing to compete with Airbus and Boeing, but their approach is subtle; create/identify
the market, fill a void and replace aging aircraft that are going to be retired.
Product Families
Page 6 of 16
Embraer’s method of managing its product lines is based around “families” of
aircraft. Rather than developing a single model, Embraer designs it products based on
platforms than can be scaled to larger or smaller capacities allowing for parts reuse and
reduction of learning curves for it staff. This strategy keeps cost low and improves time
to market. The platform or family approach to product management reduced time to
market by two to three years, allowing Embraer aircraft to be introduced in less than half
the industry standard time that new plane projects require6.
The platform approach to product management works hand in hand with Embraer’s
strategic partnership strategy. Embraer’s strategy can be broken in three parts6:
Choose Technology Areas aimed at product innovation and fulfilling the needs/requirements of customers
Identification of risk partners for supply of parts and subsystems (“technology packages”)
Cultivation of local subcontractors for engineering services, chemical coatings, milling and other specialized aircraft technologies
Strategic Partnerships
For key technology areas, it is not important that Embraer manufacture every key
technology, but rather the company leverages its core capabilities in systems integration,
marketing and technical services coordinating the risk partnerships. The risk partners are
enlisted to supply key components of the aircraft and are required to invest their own
funds for development, thereby taking on some of the risk of the project. Partners are
rewarded if the project is successful in supplying primary components and spares for the
life of the new aircraft. Most of the risk partners are located outside of Brazil but
collocate engineers in São José dos Campos. Local subcontractors are used extensively
Page 7 of 16
for engineering services, milling, and coatings. Many of the local firms were founded by
former Embraer employees, resulting in an aircraft industry “cluster”.
Intelligent Systems
Instead of attempting to build an entire aircraft and develop all technologies within
Brazil, Embraer has chosen to focus on key aircraft technologies while building core
expertise in aerodynamics, fuselage and systems integration.6 The decision to focus on
the fuselage was driven partly because this technology could not be easily sourced
outside of Brazil and thus it provided a good area for Embraer to develop its own
expertise. This became part of Embraer’s determination not to outsource the aircraft
cockpit nor “anything that was not integral to its longer term strategy of concentrating on
the provision of ‘intelligent systems’”1. Embraer’s recognition of the fact that increasing
its competency in systems integration is more important than the ability to create or
manufacture all of the technologies in an aircraft, provided it with a realistic approach to
competing globally.
Disruptive Innovation?
Another useful framework for analyzing the commercial aircraft industry and
Embraer’s strategy is from the point of view of “disruptive technology” as introduced by
Clayton Christensen4. The commercial aircraft industry is dynamic and subject to the
effects of Porter’s five forces as described earlier. Vendors in this industry need to be
cognizant not only of economic factors that impact buyers (airlines) but also of passenger
Page 8 of 16
preference trends. A keen awareness of passenger trends allows vendors to understand
market dynamics and sustain or improve their current position. Furthermore, an
appreciation of the role disruptive innovation may lead manufacturers to discover new
opportunities and grow future sales.
As applied to the aircraft industry, Christensen’s model could be represented as in the
graph below:
From the analysis, Embraer could choose to compete with the Airbus 320 and Boeing
737 in some sectors. With superior operating margins, Embraer presents a compelling
case for airlines to consider Embraer aircraft to assemble lighter and more efficient fleets.
Based on the previous Porter analysis, the reaction of the incumbent vendors must be
Page 9 of 16
considered. Although one would expect them to “defend” their “turf”, the Airbus 320
and Boeing 737 are larger aircraft and more expensive to operate. One could argue that
Embraer has already eaten into some of the market share that would have been been
attained by Airbus or Boeing by filling the 70 to 110 seat void with lower cost aircraft.
However, according to Embraer CEO Botelho, entering the 135 seat aircraft market is not
in the cards for Embraer as this would mean “jumping into the big dogs’ market”, a
reference to Airbus and Boeing8. Rather, he would prefer to diversify into the defense
market and expand in the business jet market.
Alliances and Partnerships – A new strategic direction or logical outgrowth?
From the beginning, Embraer formed strategic relationships with technology partners.
The first Embraer jet trainer licensed technology from the Italian firm Aermacchi for a
product to be used by the Brazilian Air Force. Other technology came from the Brazilian
Aeronautical Technical Center’s (CTA) Institute of Research and Development (IPD).
Embraer learned to incorporate technology from different sources while strengthening
core competencies in intelligent systems, systems integration and project engineering.
The use of risk partners not only benefits Embraer from a technological point of view, but
also from a financial and capital structure point of view. Based on Embraer’s past with
the turbulent Brazilian economy of the early 1990’s to Botelho’s restructuring in the
middle 1990’s, to the WTO dispute, Embraer has always faced difficulties with respect to
funding projects. In addition to the regional jet market, Embraer participates in
competition for defense business in Brazil and globally. While Botelho would like to
expand Brazil’s share of the defense business his success has been limited.
Page 10 of 16
The 1999 announcement of a strategic alliance with a group of French aerospace
companies was a logical outgrowth of Embraer’s overall strategy of risk partnerships.
Embraer had already embarked on an effort to work with fewer key suppliers on the ERJ-
170/190 (only 26 vendors vs. 45 for the ERJ-145)6. The US defense market had proven
difficult to break into. An alliance could provide extra capital funding, technological
resources and credible partners to bolster business in this important sector not subject to
WTO restrictions. Also, this move was consistent with Embraer’s core strategy to
develop “Intelligence Systems”. In the defense context, this translates to “Intelligent
Defense Systems”1.
The new alliance provides the capability for Embraer to transfer in technological
know-how for supersonic aircraft, and allows expansion into defense systems for naval
and ground support1. An alliance is also a good alternative to being acquired which
would most likely be defeated by government veto. Overall, in terms of diversification in
product lines, capital funding sources, and acquisition of new technological capabilities,
the alliance is a good fit and is consistent with Embraer’s core strategy.
A Global Leader from an Emerging Economy
According to Porter, “Government cannot create competitive industries; only
companies can do that.”7 In the case of Embraer, the role of government is to act as "a
catalyst and challenge”. Embraer can credit part of its success to “government-
sponsored institutional and technological developments dating back to the 1950s”6.
Embraer implemented much of the IPD technology to its advantage but created its own
methods of technological innovation and internal learning to carry it forward. Embraer is
Page 11 of 16
responsible for increasing the size and capabilities of the São José dos Campos region
and creating a local aircraft design cluster for Brazil.
Even with government help, the appearance of Embraer in a developing country such
as Brazil appears to be an anomaly. However, in the context of Porter’s analysis of the
Competitive Advantage of Nations, some of Brazil’s lack of endowments actually created
the necessity out of which Embraer is born. For example, Brazil has large amounts of
land through difficult terrain and wide rivers but limited surface transportation
infrastructure. Aircraft are a natural way to overcome these challenges.
In applying Porter’s Diamond Framework to Embraer, we can analyze the success of
the company and attempt to understand the reasons for this success.
Page 12 of 16
1. Firm Strategy, Structure and Rivalry
Embraer has no domestic rivals in the aircraft business. Embraer was founded by the
government and later was privatized. There is an active aircraft industry in the local
suppliers to Embraer in São José dos Campos which mirrors what the United States
has in area surrounding MIT.
2. Demand Conditions
Embraer certainly has demanding local and global customers. Locally, the Brazilian
Defense Force and Brazilian Airlines do not automatically choose Embraer. They
Page 13 of 16
must compete and win on a level playing field. Brazil’s domestic buyers are just as
discerning as global buyers.
3. Related Supporting Industries
In São José dos Campos, Embraer enjoys geographic proximity to upstream and
downstream industries. This facilitates the exchange of information and promotes a
continuous exchange of ideas and innovations. These local suppliers are also free to
compete globally.
4. Factor Conditions
Brazil did not inherit any key factors to help them enter the aerospace business. After
World War II, highly skilled skilled and specialized labor was cultivated. Embraer
never had easy access to capital or benefited from the Brazil’s infrastructure. Over
time, Embraer has developed core competencies and has helped São José dos Campos
to grow creating specialized factors and conditions helping to foster sustained
innovation and investment from overseas. These factors are difficult to duplicate and
have lead to competitive advantage.
Implications for Brazil
Embraer’s success demonstrates that with the proper mix of government support,
strong corporate leadership and sound strategy, Brazilian companies can succeed
globally. Embraer is a great source of national pride for Brazil and an exceptional case.
However, the company faced adversity and was able to overcome it through strong
leadership, partnerships with and incentives from the government, along with global risk
Page 14 of 16
partnerships structured to allow technology to flow into Embraer. By adding value and
leveraging technologies from other countries, Embraer was able to build its own core
competencies and achieve global leadership in the regional jet market. Other businesses
in Brazil are equal candidates for success, specifically satellite and fuel technologies. As
Porter points out, the government may act as a catalyst, but only companies can create
sustained competitive industries.
Managers that recognize the fact that their home nation is integral to their success will
also promote continuous innovation while welcoming the formation of clusters of like
competitors to create national centers of excellence. These clusters will lead to what
Porter calls the “Diamond of National Advantage” which is a self-reinforcing construct
that is difficult for other nations to imitate. Ultimately, nations that wish to be
competitive effectively on a global basis need to realize that “only companies can achieve
and sustain competitive advantage” and that the “capacity of its industry to innovate and
upgrade” is essential. Armed with this knowledge, national policy makers can make
decisions fostering an environment conducive to supporting industries that will be able to
take advantage of the lessons described above.
References
1. Embraer: The Global Leader in Regional Jets, Pankaj Ghemawat, Gustavo A. Herrero, Luis Felipe Monteiro, Harvard Business School, 9-701-006, October 20, 2000
2. How Competitive Forces Shape Strategy, Michael E. Porter, HBR Article, March-April 1979.
3. Designing and Implementing a New Supply Chain Paradigm for Airplane Development, Yun Yee Ruby Lam, MIT, June 2005, https://dspace.mit.edu/handle/1721.1/34854
Page 15 of 16
4. Global Collaboration and Implementation – World Aerospace Symposium-2005, Tim Bowler, www.aviationweek.com/conferences
5. The Innovator’s Dilemma, Clayton M. Christensen, Harper Business, 2000, New York
6. Transfer of Technology for Successful Integration into the Global Economy, A case study of Embraer in Brazil, José E. Cassiolato, Roberto Bernardes and Helena Lastres, UNCTAD, United Nations, New York and Geneva, 2002, http://www.unctad.org/en/docs/iteipcmisc20_en.pdf
7. The Competitive Advantage of Nations, Michael E. Porter, HBR 90211, 1990
8. The Little Aircraft Company that Could, Russ Mitchell, Fortune Magazine, November 14, 2005
9. Airbus vs. Boeing Revisted: international competition in the aircraft market, Douglas A. Irwin, Nina Pavcnik, Journal of International Economics, 28 August 2003, http://www.dartmouth.edu/~dirwin/airbus3.pdf
Page 16 of 16