Case 2: The Relationship between Science and Technology Science and Technology The Nature and...
-
Upload
felicia-cox -
Category
Documents
-
view
225 -
download
3
Transcript of Case 2: The Relationship between Science and Technology Science and Technology The Nature and...
Case 2: The Relationship between Science
and Technology
Science and TechnologyThe Nature and Development of Science and Technology
What is technology? Science and technology are very similar to each
other, yet they are actually different
For understanding what technology is, we have to distinguish the difference between science and technology first.
Science ≠Technology
Science ≠Technology
The easiest difference between science and technology for people to understand is their starting points are originated from different causes with different purposes.
The basic purposes of science
Simply speaking, scientific investigation is originated from people’s intellectual curiosity to the nature. The main purpose of science is to observe natural environment and understand how it operates.
Science researchers apply scientific investigation methods to investigate the process of nature and find out the laws controlling the operation of nature.
The basic purposes of technology
Technology is originated from people’s desire and intelligence from the hope of being able to control and handle the requirements for living.
People can design and produce different tools to assist them in solving problems according to different situations and needs. Technology also includes the techniques and methods allowing people to achieve some purposes.
The establishment of Science reflects the systematic pursuance of people to understand the nature.
The development of Technology reflects people’s multi-disciplinary organizing ability and creativity to improve the surrounding environment and living standard.
What is technology?
Technology is the advancement and interflow of skills from generation to generation. The design keeps improving in the whole process to produce new technologies and products continually
In the 19th century, technology was regarded as the applied
technique for producing a product
In the 20th century, the area of technology included all of the knowledge, skills, products and services, which are for satisfying what people need and desire. Technology involves application of scientific knowledge and product design.
Examples of human’s application of technology
Improve the living environment: Eskimo’s igloo
How do the Eskimos solve the problem of living in the icy cold North Pole? Traditional Eskimos live above the glacier, how do they make use of the surrounding abundant resources - ice - to solve the problem of housing?
Eskimo’s igloo
Igloo
• ‘Ice’ gives a cold feeling to human, but how can the igloo (the ice house) produced by ice help people to withstand the severe cold weather?
‘ice’ as ‘bricks’ ‘water’ as ‘mud’+
‘igloo’
How to build the igloo?
Reference: http://www.benmeadows.com/refinfo/Tips/Article1.htm
1. Cut the ice
• Use broadsword or saw to cut the hard ice into blocks• The size is about
– Length 1 m– Height 0.4 m– Depth 0.2 m
2. Form a circle
• Form a circle with blocks around the hole created where you cut the blocks
• Cut the circle from the top of the last block to the bottom of the first block in a spiral form. This will make it easy to construct a dome (as shown in the figure)
3. Build up walls• Stack the blocks for building walls and shape
them so that they lean inward• Cut a hole under the wall for the ‘cold sink’
and ‘entrance’• Put several blocks along one wall for a
sleeping platform
4. Sealing the top
• The last block must initially be larger than the hole
• Place the block on top of the igloo, then, from inside, shape and wiggle it to slot exactly into the hole
5. Air circulation
• Hot air from your body rises and is then trapped inside the dome
• Cold air falls into the ‘cold sink’ and flows away to the outside
• It is essential to open ventilation holes in the walls for keeping sufficient air circulation
6. Finished Igloo
• With warmth inside the igloo, the surface of the walls will melt and freeze over, to form a smooth, airtight ice surface.
• The roof over entrance tunnel prevents snow from blowing into igloo
WARNING! • It is vital to make at least one air hole in the roof to avoid suffocation• The use of stoves in an enclosed shelter is not recommended due to dangerous build-up of carbon monoxide
Technology of building igloo
• Why are ‘ice’ and ‘water’ used as construction materials?
• The principle to keep warm inside the igloo
• The characteristics of dome-shaped architectural design
Reasons for using ‘ice’ and ‘water’ as construction materials
• To obtain material from local sources, ‘ice’ and ‘water’ are the most convenient materials for construction there
• As ice blocks from the igloo would blend with each other through continual melting and freezing, which increase the strength of the ice wall
• The density of ice prevents wind penetration and keep the freezing wind away from the house
• Ice is an extremely weak heat conductor
– It insulates heat effectively, the heat energy indoor can hardly be conducted outside through the ice and thus indoor temperature is kept
The principle to keep warm inside the igloo
• Based on the principle that hot air rises and cold air sinks– The hot air inside the igloo (hot air from human body) would concentrate
at the dome position– Cold air falls into the ‘cold sink’ and flows away to the outside– The ice-made bed is raised to a higher position and ensure the place of
sleeping is warm.• There is at least a ventilation hole in the igloo to keep efficient air circulation and prevent melting of the inner wall• Temperature inside the igloo is kept within several degrees below zero to more than 10 degrees. It is much warmer when compared with
the outdoor temperature of -50 ℃ and allows the Eskimos to pass the cold winter
The characteristics of dome-shaped architectural design
1. The smallest ratio of [surface area : volume]
- enables using the least materials (ice block) for building the largest igloo
2. The structure is relatively stable and it is not easy to collapse
– Examples of other dome-shaped architecture :• an arch bridge
• Church with a dome-shaped roof
END
The process of technological design
and realisation
Technology – since the ancient time, people have already known how to create different ways to solve problems for dealing with the needs in living. To solve problems, one should understand the situation facing and the needs for dealing with.
Having the ideas and thoughts, people can produce useful products, such as tools and machines in various scales through design and realization.
Identify the problems
Find out the needs
Design brief and specifications
Collect information and investigation
Consider design factors
Propose, analyse and evaluate different solutions
The best solution fulfilling all necessary condition, requirements and constraints
Draw up a realisation plan and prepare materials, finish with final solution
Design and realisation process
What is the problem to be solved?
What is the expected final result you hope you can achieve?
For achieving the expected result, what are the design factors having to be considered?
After integrating the result of investigation and information collection, what kind of feasible solutions can be proposed?
Can we choose the most suitable solution? What kind of conditions should the best solution fulfill?
What are the materials and working procedures needed to realize the plan to solve the problem.
The design factors
Anthropometrics When people use the products, it should be able to enhance comfortable feelings,
the working perfomance and keeping healthy
Ergonomics Users and the products complement each other including the size, the weight, the
position and the users’ habit
Psychology Related to the science of human’s nature and behaviours
Aesthetics Whether the appearance of the product is appealing
In the research and development stage of the designing process, designers need to consider other factors such as anthropometrics, ergonomics, aesthetics, materials and safety, etc. Some design factors are listed below:
Example: massage chair with design suit for human body to slacken fatigue feeling Image: http://tns.ndhu.edu.tw/~wlliu/service.htm
Environmental problems The scheme of reducing waste from the source, repairing, reconstruction, restoration and recycling
Safety Products must not be harmful to users
Materials Physical, chemical and manufacturing properties ( included heat, electric,
acoustic, optical, mechanical and anti-oxidation properties, etc. )
Cost effectiveness Use the lowest cost to produce products that can satisfy the customer’s need
Legal problems Intellectual property, patent right and copyright
Other design factors
Example: rechargeable batteries
The advantages and disadvantages of technology brings to human
The development of science and technology has inevitably greatly improved the quality of human living. But matters always have two sides, while the science and technology improve human’s lives, they also bring about the crises to us.
The crises come from different factors, included the drawbacks from technology itself and also from the errors made by human when applying the technology, and part of them is caused by the inappropriate application of technology.
Example 1: The drawbacks of technology itself
DDT for killing pestsPlastic products
Carcinogenic?
Toxic? Pollution?
Example 2: Accidents due to human errors when applying technology
Errors in architectural design Industrial accidents
Negligence
Collapse of Charles de Gaulle-Roissy Airport in Paris
Image:http://www.ycwb.com/gb/content/2005-02/22/content_852724.htm
Example 3: Abuse or inappropriate application of technology
Electronic crime
CRIME SCENE DO NOT ENTER CRIME SCENE DO NCRIME SCENE DO NOT ENTER CRIME SCENE DO NDummy websites
of banks
Embezzlement of credit card account
Computer viruses
Hacking
Phishing
Virus
Related teaching activities
For the discussion questions and articles about examples 1, 2, 3, please refer to the teaching materials in Lesson 5, 6