How to replace a frontstabilizer rod/link onToyota Prius II

www.autodoc.co.uk 1–4

Carry out replacement in the following order:

1

Tighten the parking brake lever.

2

Place wedge blocks under the rear wheels.

3

Loosen the wheel mounting bolts.

4

Raise the front of the car and secure on supports.

How to replace a front stabilizerrod/link on Toyota Prius II

www.autodoc.co.uk 2–4

5

Remove the front wheels.

6.1

Remove the nuts fastening the stabilizer rod tothe stabilizer link and the suspension strut.

6.2 7

Remove the stabilizer rod.

8.1

Install a new rod, tighten the nut fastening to thestabilizer bar and the suspension strut

AutoDoc recommends:

Examine stabiliser bushes. Replace them if needed.

How to replace a front stabilizerrod/link on Toyota Prius II

www.autodoc.co.uk 3–4

8.2 8.3

9

Install the wheel.

10

Lower the car and working in a cross order,tighten the wheel bolts.

We hope that this informationhave been useful for you!

Video tutorialsWatch our detailed video guides about your Toyota Prius IIrepair on our youtube channel. Watch video guides.

AutoDoc onlineHighest quality stabilizer rods for your car Toyota Prius II areavailable on AutoDoc. Go to the website.

How to replace a front stabilizerrod/link on Toyota Prius II

www.autodoc.co.uk 4–4

AUTODOC — TOP QUALITY AND AFFORDABLE CAR PARTS ONLINE

QUALITY AUTO PARTS TOYOTA

STABILIZER RODS TOYOTA PRIUS II

STABILIZER RODS FOR TOYOTA STABILIZER RODS FOR TOYOTA PRIUS II

AUTODOC IN SOCIAL MEDIA

Disclaimer:The document contains only general recommendations that may be useful for you when you perform repair or replacement works. AutoDocshall not be liable for any loss, injury, damage of property, acquired in the repair or replacement process due to incorrect usage ormisinterpretation of the provided information.

AutoDoc shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for informative purposes onlyand cannot replace advice from specialists.

AutoDoc shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AutoDoc strongly recommends to be carefuland observe the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guaranteeyou the appropriate level of road safety.